[SOLVED] GNOME 3 won't load after adding networkmanager

Hello!
Just did a fresh install on a HP42-475DX system, did a -Syy/-Syu, installed xorg, xf86-video-ati, telepathy, and gnome. Everything installed fine and I was able to log into Gnome with no issues.
While trying to get wireless working in Gnome (and have an applet appear in the corner), I installed network-manager-applet, removed network from daemons and replaced it with networkmanager, and then rebooted. My boot sequence goes all the way through loading gdm and then the screen goes black. It's still backlit, there's just nothing displaying. ctrl+alt+f1 does not yield a terminal for me to log in with.
Is there something I'm missing and/or screwed up?
Thanks for your help in advance.
Czar.
Edit: Booting into live environment and removing networkmanager from the daemon array allows me to log into Gnome.
Last edited by Czarcasmo (2011-05-24 11:00:05)

caligo wrote:What does your daemons array in rc.conf look like? Make sure that dbus is started before networkmanager. Also, try to block the network daemon by putting "!network" before "networkmanager".
Caligo, thanks for the reply! I don't specifically have network being blocked right now. Should it be? Right now, my DAEMONS array looks like this:
DAEMONS=(syslog-ng dbus ifplugd netfs crond gdm)
wonder wrote:paste ~/.xsession-errors
wonder, I could not locate that file. When I do a ls -a to print my hidden files, the only one I have is .bash_history.
Thank you both for your help. Have a good one!
Czar.
Edit: Caligo, you nailed it! I added !network to the DAEMONS array and it came up perfect.
Last edited by Czarcasmo (2011-05-24 10:59:53)

Similar Messages

  • Boot Camp Won't Load after adding Mavericks

    How things started
    13" MacBook Air mid-2011
    Mac OS X Lion 10.7.5 (11G63b) with 256gb SSD
    HDD partition between OS/X and a BOOTCAMP partition running Windows 7 SP1 x64 Ultimate
    I updated both OSes with the latest drivers.
    In Lion, I did (disabled now) have v.9.5.2 of Paragon's NTFS driver installed (which I forgot about before I started down the path I'm on).
    What I did:
    After doing a time machine backup of Lion, I downloaded Mavericks. However, Disk Utility was reporting very little free space on OS/X. I ended up having to run Repair from the Recovery Partition. Once I did that OS/X and Windows were both booting fine and I had > 180 GB of free space on my OS/X partition.
    I created a 48 GB partition as follows:
    I then installed Mavericks and got XCode, etc. installed. Today upon restarting I can't boot into Windows on Boot Camp.
    First it didn't show up on the Start Up selector when holding down the Option key. I then started looking. I set Boot Camp as start up in the Paragon applet and this allowed it to boot into Boot Camp but then I get the ...
    No bootable device --- insert boot disk and press any key
    ... error.
    So I found the magic thread with Christopher Murphy's advice so I'm looking for help.
    Here's the results of running the commands he has asked other to do:
    sudo gpt -r -vv show disk0
    gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
    gpt show: disk0: PMBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 490234751
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  323832816      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      324242456    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      325511992   92868000      4  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      418379992    1269544      5  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      419649536   70584320      6  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      490233856        863        
      490234719         32         Sec GPT table
      490234751          1         Sec GPT header
    sudo fdisk /dev/disk0
    Disk: /dev/disk0          geometry: 30515/255/63 [490234752 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -  490234751] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    Thank you for any help you may be able to provide!
    Cheers,
    Brian

    Just repost, this thread will linger and vanish eventually. I guess you are seeking the help of Chris Murphy for the Boot Camp issue, and for him to help he will need to be informed as to which OS you use. Do that discreetly, and accept that he may not be able to help as he may have no knowledge of the upcoming version.
    (I feel the searchlights swinging in our direction)

  • My apps won't load after updating to iOS4.3.2. What to do?

    My apps won't load after updating to iOS4.3.2. What to do?

    Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

  • Lightroom 5 won't load after 30 day trial of Lightroom3 error.

    I tried the 30 day trial of Lightroom 3 that I got with the Photoshop Elements 10 when I got my new computer.  The Lightroom loaded one picture and said I had an error and would try to find a solution.  I bought Lightroom5  and tried to install it and it keeps going back to the error of Lightroom 3 trial.  I tried to delete all programs associated with Lightroom and reinstall, but nothing happens.

    it just reads "Lightroom-Opening Catalog:New Years Day 2014 031.JPG.Ircat   assertion failed!
    New Years day 2014 is a folder and 031 is the picture in the folder that I tried to enhance in the 30 day free trial of Lightroom 3.  I bought Lightroom 5 from B &H and it appears to be hung up on the Lightroom 3 trial.
    kglad <[email protected]> wrote:
    kglad http://forums.adobe.com/people/kglad created the discussion
    "Re: Lightroom 5 won't load after 30 day trial of Lightroom3 error."
    To view the discussion, visit: http://forums.adobe.com/message/6048439#6048439

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • I tunes store won't load after 11.1.3 update

    I Tunes store won't load after i updated itunes . Its the 11.1.3 update

    Hello Papamax,
    And welcome to Apple Discussions!
    Have you ran an iTunes *Network Diagnostics Test* yet? If not, use the steps provided in this Apple support document to do so, and then paste your results here.
    http://support.apple.com/kb/HT3204
    Also, try temporarily disabling McAfee and see if that helps. And make sure you have allowed iTunes through its firewall, by using the instructions provided in this article.
    http://www.technipages.com/allow-program-access-through-mcafee-personal-firewall .html
    And lastly, see if any of the troubleshooting steps provided in this Apple support document can assist you.
    [iTunes for Windows: iTunes Store connection troubleshooting|http://support.apple.com/kb/ht1527]
    B-rock

  • [SOLVED] GDM/Gnome won't start after update

    Today after I run pacman -Suy, GDM/Gnome won't start anymore after reboot. The error message I get after GDM starts is:
    Oh no! Something has gone wrong.
    A problem has occurred and the system can't recover. Please contact a system administrator
    Does anyone have any idea what happened and how can I recover the system?
    Here is the complete log for the update:
    http://bpaste.net/show/209520/
    Here is the journalctl -u gdm log:
    http://sprunge.us/LEOU
    Here is tail -2000 /var/log/messages.log:
    http://sprunge.us/ObWY
    And here is the /var/log/Xorg.0.log:
    http://bpaste.net/show/209549/
    I can't imagine any other log file that might help figure out what happened, let me know if there's anything else.
    Any help is appreciated. Thanks.
    Edit: I stopped gdm, created a ~/.xinitrc and could successfully start Gnome with startx. The problem remains with GDM.
    Edit: The last update solved my problem: http://sprunge.us/RKWA
    Last edited by falmp (2014-04-22 20:38:20)

    I'm not sure my issue is really the same one, but am hoping for some guidance here if possible.  Trying to start GDM gives me the same error message/screen.  After tdm fails I can switch to a console,
    sudo systemctl stop gdm.service
    then
    sudo systemctl start lightdm.service
    and lightdm starts fine.  However, trying to log in to gnome-session gives me the very same error as I had with GDM.  I can log into XFCE just fine.  Attempting to start gnome-ession via startx also gives me the error screen.  Does anyone know how I can diagnose the problem?  Thanks,
    Matt

  • [SOLVED] KDE Won't loading

    Hello everyone.
    After reboot KDE won't loading anymore (after KDM login, stuck for ~30 sec at last stage and then appears only cursor).
    Here the my xerrors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    kbuildsycoca4 running...
    kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: checking file timestamps
    kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: timestamps check ok
    kbuildsycoca4(1074) kdemain: Emitting notifyDatabaseChanged ()
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
    Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
    Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
    kded(1073)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    kded(1073) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    kwin(1106) KDecorationPlugins::canLoad: "****** The library /usr/lib/kde4/kwin3_deKorator.so has no API version ******"
    kwin(1106) KDecorationPlugins::canLoad: ****** Please use the KWIN_DECORATION macro in extern "C" to get this decoration loaded in future versions of kwin
    kwin(1106): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
    kwin(1106): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
    kwin(1106): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
    kwin(1106): ""fsrestore4" - conversion of "0,0,0,0" to QRect failed"
    QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
    QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
    QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
    QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    Could not resolve property : linearGradient5334
    Could not resolve property : linearGradient5332
    Could not resolve property : linearGradient5326
    Could not resolve property : linearGradient5328
    Could not resolve property : linearGradient5334
    Could not resolve property : linearGradient5332
    Could not resolve property : linearGradient5326
    Could not resolve property : linearGradient5328
    Could not resolve property : linearGradient5334
    Could not resolve property : linearGradient5332
    Could not resolve property : linearGradient5326
    Could not resolve property : linearGradient5328
    Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
    Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
    kdm.log
    Note that your system uses syslog. All of kdm's internally generated messages
    (i.e., not from libraries and external programs/scripts it uses) go to the
    daemon.* syslog facility; check your syslog configuration to find out to which
    file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension Present
    Initializing built-in extension DRI3
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Loading extension NV-GLX
    Loading extension NV-CONTROL
    Loading extension XINERAMA
    klauncher(2730) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(2724)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(2724)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    Xorg.0.log
    [ 800.377]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 800.377] X Protocol Version 11, Revision 0
    [ 800.377] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 800.377] Current Operating System: Linux Spotlight 3.12.4-pf #1 SMP PREEMPT Wed Feb 19 23:20:59 EET 2014 x86_64
    [ 800.377] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-pf root=UUID=8b2512bb-5fc1-47b9-a43d-e7b3d76bf8de rw quiet apparmor=1 security=apparmor scsi_mod.scan=sync
    [ 800.377] Build Date: 09 January 2014 08:47:24AM
    [ 800.377]
    [ 800.377] Current version of pixman: 0.32.4
    [ 800.377] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 800.377] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 800.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24 18:23:57 2014
    [ 800.377] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 800.377] (==) No Layout section. Using the first Screen section.
    [ 800.377] (==) No screen section available. Using defaults.
    [ 800.377] (**) |-->Screen "Default Screen Section" (0)
    [ 800.377] (**) | |-->Monitor "<default monitor>"
    [ 800.377] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 800.377] (**) | |-->Device "Nvidia Card"
    [ 800.377] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 800.377] (==) Automatically adding devices
    [ 800.377] (==) Automatically enabling devices
    [ 800.377] (==) Automatically adding GPU devices
    [ 800.377] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 800.377] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 800.377] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 800.377] (II) Loader magic: 0x804c80
    [ 800.377] (II) Module ABI versions:
    [ 800.377] X.Org ANSI C Emulation: 0.4
    [ 800.377] X.Org Video Driver: 15.0
    [ 800.377] X.Org XInput driver : 20.0
    [ 800.377] X.Org Server Extension : 8.0
    [ 800.377] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 800.378] (--) PCI:*(0:1:0:0) 10de:0615:0000:0000 rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
    [ 800.378] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 800.378] Initializing built-in extension Generic Event Extension
    [ 800.378] Initializing built-in extension SHAPE
    [ 800.378] Initializing built-in extension MIT-SHM
    [ 800.378] Initializing built-in extension XInputExtension
    [ 800.378] Initializing built-in extension XTEST
    [ 800.378] Initializing built-in extension BIG-REQUESTS
    [ 800.378] Initializing built-in extension SYNC
    [ 800.378] Initializing built-in extension XKEYBOARD
    [ 800.378] Initializing built-in extension XC-MISC
    [ 800.378] Initializing built-in extension SECURITY
    [ 800.378] Initializing built-in extension XINERAMA
    [ 800.378] Initializing built-in extension XFIXES
    [ 800.378] Initializing built-in extension RENDER
    [ 800.378] Initializing built-in extension RANDR
    [ 800.378] Initializing built-in extension COMPOSITE
    [ 800.378] Initializing built-in extension DAMAGE
    [ 800.378] Initializing built-in extension MIT-SCREEN-SAVER
    [ 800.378] Initializing built-in extension DOUBLE-BUFFER
    [ 800.378] Initializing built-in extension RECORD
    [ 800.378] Initializing built-in extension DPMS
    [ 800.378] Initializing built-in extension Present
    [ 800.378] Initializing built-in extension DRI3
    [ 800.378] Initializing built-in extension X-Resource
    [ 800.378] Initializing built-in extension XVideo
    [ 800.378] Initializing built-in extension XVideo-MotionCompensation
    [ 800.378] Initializing built-in extension XFree86-VidModeExtension
    [ 800.378] Initializing built-in extension XFree86-DGA
    [ 800.378] Initializing built-in extension XFree86-DRI
    [ 800.378] Initializing built-in extension DRI2
    [ 800.378] (II) LoadModule: "glx"
    [ 800.378] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 800.385] (II) Module glx: vendor="NVIDIA Corporation"
    [ 800.385] compiled for 4.0.2, module version = 1.0.0
    [ 800.385] Module class: X.Org Server Extension
    [ 800.385] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 800.385] Loading extension GLX
    [ 800.385] (II) LoadModule: "nvidia"
    [ 800.385] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 800.385] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 800.385] compiled for 4.0.2, module version = 1.0.0
    [ 800.385] Module class: X.Org Video Driver
    [ 800.385] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 800.385] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 800.385] (++) using VT number 7
    [ 800.386] (II) Loading sub module "fb"
    [ 800.386] (II) LoadModule: "fb"
    [ 800.387] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 800.387] (II) Module fb: vendor="X.Org Foundation"
    [ 800.387] compiled for 1.15.0, module version = 1.0.0
    [ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 800.387] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 800.387] (II) Loading sub module "wfb"
    [ 800.387] (II) LoadModule: "wfb"
    [ 800.387] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 800.387] (II) Module wfb: vendor="X.Org Foundation"
    [ 800.387] compiled for 1.15.0, module version = 1.0.0
    [ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 800.387] (II) Loading sub module "ramdac"
    [ 800.387] (II) LoadModule: "ramdac"
    [ 800.387] (II) Module "ramdac" already built-in
    [ 800.387] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 800.387] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 800.387] (==) NVIDIA(0): RGB weight 888
    [ 800.387] (==) NVIDIA(0): Default visual is TrueColor
    [ 800.387] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 800.387] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 800.387] (**) NVIDIA(0): Option "TripleBuffer" "true"
    [ 800.387] (**) NVIDIA(0): Enabling 2D acceleration
    [ 800.821] (II) NVIDIA(0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
    [ 800.821] (II) NVIDIA(0): stereo.
    [ 800.821] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 800.822] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
    [ 800.822] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 800.822] (--) NVIDIA(0): VideoBIOS: 62.92.9a.00.00
    [ 800.822] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 800.826] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
    [ 800.826] (--) NVIDIA(0): CRT-0
    [ 800.826] (--) NVIDIA(0): CRT-1
    [ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0) (boot, connected)
    [ 800.826] (--) NVIDIA(0): DFP-1
    [ 800.826] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 800.826] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): Internal Dual Link TMDS
    [ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): 330.0 MHz maximum pixel clock
    [ 800.826] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 800.826] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [ 800.826] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 800.826] (**) NVIDIA(0): device BenQ GL940 (DFP-0) (Using EDID frequencies has been
    [ 800.826] (**) NVIDIA(0): enabled on all display devices.)
    [ 800.827] (==) NVIDIA(0):
    [ 800.827] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 800.827] (==) NVIDIA(0): will be used as the requested mode.
    [ 800.827] (==) NVIDIA(0):
    [ 800.827] (II) NVIDIA(0): Validated MetaModes:
    [ 800.827] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    [ 800.827] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 800.859] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
    [ 800.859] (--) NVIDIA(0): option
    [ 800.859] (--) Depth 24 pixmap format is 32 bpp
    [ 800.859] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 800.861] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 800.861] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 800.861] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 800.861] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 800.861] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 800.861] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 800.861] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 800.861] (II) NVIDIA(0): Config Options in the README.
    [ 800.866] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    [ 800.893] Loading extension NV-GLX
    [ 800.905] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 800.905] (==) NVIDIA(0): Backing store enabled
    [ 800.905] (==) NVIDIA(0): Silken mouse enabled
    [ 800.906] (==) NVIDIA(0): DPMS enabled
    [ 800.906] Loading extension NV-CONTROL
    [ 800.906] Loading extension XINERAMA
    [ 800.906] (II) Loading sub module "dri2"
    [ 800.906] (II) LoadModule: "dri2"
    [ 800.906] (II) Module "dri2" already built-in
    [ 800.906] (II) NVIDIA(0): [DRI2] Setup complete
    [ 800.906] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 800.906] (--) RandR disabled
    [ 800.909] (II) Initializing extension GLX
    [ 800.933] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 800.933] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 800.933] (II) LoadModule: "evdev"
    [ 800.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 800.933] (II) Module evdev: vendor="X.Org Foundation"
    [ 800.933] compiled for 1.15.0, module version = 2.8.2
    [ 800.933] Module class: X.Org XInput Driver
    [ 800.933] ABI class: X.Org XInput driver, version 20.0
    [ 800.933] (II) Using input driver 'evdev' for 'Power Button'
    [ 800.933] (**) Power Button: always reports core events
    [ 800.933] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 800.933] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 800.933] (--) evdev: Power Button: Found keys
    [ 800.933] (II) evdev: Power Button: Configuring as keyboard
    [ 800.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 800.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 800.933] (**) Option "xkb_rules" "evdev"
    [ 800.933] (**) Option "xkb_model" "pc104"
    [ 800.933] (**) Option "xkb_layout" "us"
    [ 800.943] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 800.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 800.943] (II) Using input driver 'evdev' for 'Power Button'
    [ 800.943] (**) Power Button: always reports core events
    [ 800.943] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 800.943] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 800.943] (--) evdev: Power Button: Found keys
    [ 800.943] (II) evdev: Power Button: Configuring as keyboard
    [ 800.943] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 800.943] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 800.943] (**) Option "xkb_rules" "evdev"
    [ 800.943] (**) Option "xkb_model" "pc104"
    [ 800.943] (**) Option "xkb_layout" "us"
    [ 800.944] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event13)
    [ 800.944] (**) SONiX USB Device: Applying InputClass "evdev pointer catchall"
    [ 800.944] (II) Using input driver 'evdev' for 'SONiX USB Device'
    [ 800.944] (**) SONiX USB Device: always reports core events
    [ 800.944] (**) evdev: SONiX USB Device: Device: "/dev/input/event13"
    [ 800.944] (--) evdev: SONiX USB Device: Vendor 0xc45 Product 0x7711
    [ 800.944] (--) evdev: SONiX USB Device: Found 9 mouse buttons
    [ 800.944] (--) evdev: SONiX USB Device: Found scroll wheel(s)
    [ 800.944] (--) evdev: SONiX USB Device: Found relative axes
    [ 800.944] (--) evdev: SONiX USB Device: Found x and y relative axes
    [ 800.944] (II) evdev: SONiX USB Device: Configuring as mouse
    [ 800.944] (II) evdev: SONiX USB Device: Adding scrollwheel support
    [ 800.944] (**) evdev: SONiX USB Device: YAxisMapping: buttons 4 and 5
    [ 800.944] (**) evdev: SONiX USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 800.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/input/input13/event13"
    [ 800.944] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE, id 8)
    [ 800.944] (II) evdev: SONiX USB Device: initialized for relative axes.
    [ 800.944] (**) SONiX USB Device: (accel) keeping acceleration scheme 1
    [ 800.944] (**) SONiX USB Device: (accel) acceleration profile 0
    [ 800.944] (**) SONiX USB Device: (accel) acceleration factor: 2.000
    [ 800.944] (**) SONiX USB Device: (accel) acceleration threshold: 4
    [ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse0)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event7)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event6)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event5)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
    [ 800.944] (II) No input driver specified, ignoring this device.
    [ 800.944] (II) This device may have been added with another device file.
    [ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
    [ 800.945] (II) No input driver specified, ignoring this device.
    [ 800.945] (II) This device may have been added with another device file.
    [ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
    [ 800.945] (II) No input driver specified, ignoring this device.
    [ 800.945] (II) This device may have been added with another device file.
    [ 800.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 800.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 800.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 800.945] (**) AT Translated Set 2 keyboard: always reports core events
    [ 800.945] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 800.945] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 800.945] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 800.945] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 800.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 800.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 800.945] (**) Option "xkb_rules" "evdev"
    [ 800.945] (**) Option "xkb_model" "pc104"
    [ 800.945] (**) Option "xkb_layout" "us"
    [ 800.945] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 800.945] (II) No input driver specified, ignoring this device.
    [ 800.945] (II) This device may have been added with another device file.
    [ 805.999] (II) NVIDIA(GPU-0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
    [ 805.999] (II) NVIDIA(GPU-0): stereo.
    Running latest NVIDIA drivers (GTS 250).
    Last edited by Swiftie (2014-02-24 17:28:19)

    I discovered problem. It's caused by NetworkManager after last update (libsystemd.0.so trouble).
    Recompile pkg by yourself to get working NetworkManager.
    Last edited by Swiftie (2014-02-24 17:28:01)

  • Page won't load after snippet insert

    I just installed the code for Google Analytics through an HTML snippet in iWeb, which i put on each page then published the site. But after i did so, my website won't load at all, and i cannot figure out why. Any ideas?

    Well, here's  the HTML Snippet with your code :
    http://mkstudios.comxa.com/MK_Studios//Home_files/widget2_markup.html
    Google will analyze the widget page, not the page you ceate in iWeb.
    Use my method or change the lines in the code by adding the word parent :
    var ga = parent.document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == parent.document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = parent.document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);

  • ITunes won't load after recent upgrade

    I see I'm not the only one with this problem. I've been through the FAQ and removed and downloaded iTunes and Quicktime separately multiple times, but iTunes won't load. It will be difficult to buy more songs like this.
    I've a Sigma Tel Audio driver installed by Dell. I'm running McAfee anti virus. Let me know what other info will help somebody to help me solve this.
    Thanks.

    a few questions before proceeding.
    are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
    or are you getting no error messages whatsoever when you try to launch itunes?
    if no error message, a few more preliminary questions aimed at narrowing in on possible culprits.
    (1) do you have Norton Internet Security 2005 installed on the PC?
    (2) try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)
    (3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • IBook G4 won't load after latest security update, repair doesn't work?

    Hi I had the same problem as someone else in this forum:
    "Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
    I really need suggestions as how I can fix it. Thanks
    ibook g4 Windows 2000
    Carolyn Samit
    Posts: 8,431
    From: Alameda CA Bay Farm Island
    Registered: Aug 5, 2005
    Re: G4 wont boot after latest security upgrade
    Posted: May 22, 2009 2:51 PM in response to: voiletmay
    Click to reply to this topic Reply email Email
    HI,
    Ok... you need to boot from your install disk.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If you cannot boot from your install disk, try booting in Safe Mode
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
    Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
    Carolyn "
    I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?

    *" I also left it on for hours and it did nothing. "*
    Your iBook needs to go in for repairs.
    Carolyn

  • CFB won't load after update 1

    I'm running CFB plugin on Eclipse 3.5.1 on Win 7 x64. I purchased CFB right after update 1 came out, restarted eclipse, entered my key, updated the software, restarted eclipse using the -clean option, and everything worked great. I've been using it for the past week. However, I just restarted eclipse for the first time since I've updated, and it won't load CFB. I get the following error:
    Could not open the editor: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
    org.eclipse.ui.PartInitException: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
        at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:598)
        at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462)
        at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
        at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
        at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1417)
        at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
        at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
        at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
        at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
        at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
        at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Please help!!!

    To fix this, I launched eclipse again with the -clean option. CFB asked me to enter a key (which I already had done before I applied update 1). I entered the key again and CFB loaded.
    I had already run eclipse with the -clean option after installing CFB update 1. I double checked to make sure I didn't have to do this each time I restarted eclipse - I quit eclipse and launched it again, and CFB loaded. Everything seems to be working okay now.

  • Zenworks won't load after NW65sp5 install

    I'm not sure if this should be posted here or elsewhere...its a java
    problem now.
    Server is NW6.5SP3 running Zenworks 4. I installed the above service pack
    and at the end errored. After reading a similar item in the forum I
    renamed the java folder to something else and reinstalled the service pack
    which completed this time. Now however, Zenworks will not load due to java
    errors.
    The two classes that won't load correclty are
    ..desktop.inventory.servercommon... and
    autowsmanagement.wsremoval.removeWorkStations.
    Thanks in advance.

    Fredr,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Safari won't load after update

    I updated my MBP to 10.5.6 today, after the update Safari won't load at all on administrator account. I went to Preferences and trashed the .plist and that didn't help. It does load on the guest account.
    Any suggestions?
    I want to keep using Safari because of my iPhone and MobileMe.
    Thanks.

    Would that be in the console log inside disk utilities?
    Here's the info from today, I will try and find it from the other day if needed.
    12/20/08 7:39:53 AM com.apple.launchd[68] (com.flyingmac.farfinder.updater[877]) open("/Library/Logs/FarFinder/launchd.updater.log", ...): No such file or directory
    12/20/08 7:39:53 AM FarFinderUpdater[877] Can't find the application
    12/20/08 7:39:53 AM com.apple.launchd[68] (com.flyingmac.farfinder.updater[877]) open("/Library/Logs/FarFinder/launchd.updater.log", ...): No such file or directory
    12/20/08 7:40:21 AM com.apple.Safari[976] NO
    12/20/08 7:40:21 AM com.apple.launchd[68] (com.apple.Safari[976]) Exited with exit code: 1
    12/20/08 7:40:24 AM com.apple.launchd[68] (com.apple.Safari) Throttling respawn: Will start in 57 seconds
    12/20/08 7:41:25 AM com.apple.Safari[979] YES
    12/20/08 7:42:19 AM com.apple.launchd[68] ([0x0-0x72072].com.apple.Safari[982]) Exited: Terminated
    12/20/08 7:44:30 AM com.apple.launchd[68] ([0x0-0x75075].com.apple.Safari[991]) Exited: Terminated
    12/20/08 7:45:40 AM com.apple.Safari[1026] YES
    12/20/08 7:45:56 AM com.apple.launchd[68] ([0x0-0x79079].com.apple.Safari[1030]) Exited: Terminated
    12/20/08 8:03:37 AM Preview[352] -[<IKKnobLayer: 0x1f0671b0> display]: Ignoring bogus layer size (1050.381714, 0.697937)

  • System won't load after startup repair - Satellite A500

    Hi guys,
    I've got a problem with my laptop. I shut down my laptop directly by switching off from the switch. After I start the laptop the system recommends startup repair but it was unable to repair and after that it just went up to the welcome page and it won't load anymore.
    Do anyone have any idea what is the problem?
    Thank you

    hi plioe,
    can you run chkdsk on the hdd?
    do you hear unusual sounds from the harddisk?
    it seems that your harddisk has some problems...
    this causes a slow startup or failure to boot...
    but to be sure a recovery is recomended in some cases the software configuration went bad...

Maybe you are looking for