[SOLVED] GNOME Shell 3.4 : Volume Control Missing
Hi all, I have an Acer netbook with Arch Linux i686. I installed GNOME-Shell 3.4, but there is no volume control applet. When playing music, i can't control the volume. Can you help me?
(Sorry for my bad English)
Last edited by masnormen (2012-06-05 04:44:14)
Thanks, the problem is solved now. Volume Applet shown after update.
Similar Messages
-
[Solved] Gnome-shell text turned to rectangles after botched upgrade
Hi all,
I've run into a problem that I just can't solve, so I was wondering if somebody with a lot of expertise could help out. My system has a couple of stability issues; it freezes up every few days, and I have to make a hard reboot (I think it's related to the video card, but I haven't had the funds to go get a better one yet). The last time it froze was during a pacman upgrade, and I had to reboot. At the new boot, after logging in, all of the gnome-shell letters turned to rectangles (see screenshot), and I had a bunch of other errors. I ran another upgrade Sync with pacman and rebooted; that took care of the errors, but the font problems still remained. The interesting thing is that the gdm window has no problems, I can see the icons on the top right just fine, and the date renders perfectly. It's only when I log in when the blocks occur, and they only occur on gnome-shell panel text (and on everything under Activities).
I have a 32-bit system that's fully migrated to systemd with open source radeon drivers. Here's some output of journalctl for the current boot, with stuff unrelated to the gnome-shell display removed (e.g. NetworkManager, UFW, etc). However, I didn't find any new errors compared to logs from before the upgrade.
-- Logs begin at Mon, 2012-09-10 23:14:10 PDT, end at Tue, 2012-09-11 18:52:58 PDT. --
Nov 17 12:26:09 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:10 Whitcomb dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:11 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:11 Whitcomb polkitd[315]: Started polkitd version 0.107
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /etc/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /usr/share/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb polkitd[315]: Finished loading, compiling and executing 2 rules
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb polkitd[315]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Nov 17 12:26:15 Whitcomb systemd[1]: Started Manage, Install and Generate Color Profiles.
Nov 17 12:26:15 Whitcomb systemd[1]: Started Authorization Manager.
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRB]
Nov 17 12:26:15 Whitcomb kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Nov 17 12:26:15 Whitcomb kernel: ACPI: Sleep Button [SLPB]
Nov 17 12:26:15 Whitcomb kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRF]
Nov 17 12:26:15 Whitcomb kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
Nov 17 12:26:15 Whitcomb kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 17 12:26:15 Whitcomb kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU0 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Nov 17 12:26:15 Whitcomb kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Nov 17 12:26:15 Whitcomb kernel: agpgart: Detected VIA VT3314 chipset
Nov 17 12:26:15 Whitcomb kernel: agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Nov 17 12:26:15 Whitcomb kernel: psmouse serio1: hgpk: ID: 10 00 64
Nov 17 12:26:15 Whitcomb kernel: ppdev: user-space parallel port driver
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU1 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Nov 17 12:26:15 Whitcomb kernel: cfg80211: Calling CRDA to update world regulatory domain
Nov 17 12:26:15 Whitcomb kernel: via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
Nov 17 12:26:15 Whitcomb kernel: via_rhine: Broken BIOS detected, avoid_D3 enabled
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1cc00, 00:19:db:6a:70:49, IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c1e1
Nov 17 12:26:15 Whitcomb kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
Nov 17 12:26:15 Whitcomb kernel: ath5k 0000:00:07.0: registered as 'phy0'
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM regdomain: 0x10
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM indicates we should expect a direct regpair map
Nov 17 12:26:15 Whitcomb kernel: ath: Country alpha2 being used: CO
Nov 17 12:26:15 Whitcomb kernel: ath: Regpair used: 0x10
Nov 17 12:26:15 Whitcomb kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: RF2112B 2GHz radio found (0x46)
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Nov 17 12:26:15 Whitcomb kernel: snd_via82xx 0000:00:11.5: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: Adding 3903788k swap on /dev/sda2. Priority:-1 extents:1 across:3903788k
Nov 17 12:26:15 Whitcomb kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 17 12:26:15 Whitcomb kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event4 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event2 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event3 (Sleep Button)
Nov 17 12:26:16 Whitcomb systemd[1]: PID file /run/deluge/deluged.pid not readable (yet?) after start.
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb systemd[1]: Started Network Manager.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Reached target Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network Time Service...
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Mount Samba Shares...
Nov 17 12:26:16 Whitcomb systemd[1]: Started Mount Samba Shares.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Deluge Daemon.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Network Time Service.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 17 12:26:17 Whitcomb systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 17 12:26:17 Whitcomb systemd[1]: Startup finished in 4s 827ms 48us (kernel) + 20s 199ms 872us (userspace) = 25s 26ms 920us.
Nov 17 12:26:19 Whitcomb kernel: fuse init (API version 7.20)
Nov 17 12:26:19 Whitcomb systemd[1]: Mounting FUSE Control File System...
Nov 17 12:26:19 Whitcomb systemd[1]: Mounted FUSE Control File System.
Nov 17 12:26:19 Whitcomb gdm-simple-slave[311]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Nov 17 12:26:19 Whitcomb kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Accounts Service...
Nov 17 12:26:20 Whitcomb accounts-daemon[371]: started daemon version 0.6.25
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb systemd[1]: Started Accounts Service.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Console Manager...
Nov 17 12:26:21 Whitcomb console-kit-daemon[376]: missing action
Nov 17 12:26:21 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb systemd[1]: Started Console Manager.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: New session 1 of user gdm.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb systemd[1]: Starting Daemon for power management...
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb systemd[1]: Started Daemon for power management.
Nov 17 12:26:27 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:27 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully called chroot.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully dropped privileges.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully limited resources.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Canary thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Watchdog thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully made thread 523 of process 523 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Supervising 1 threads of 1 processes of 1 users.
Nov 17 12:26:28 Whitcomb pulseaudio[523]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:19:db:6a:70:49:00:18:74:eb:98:00:08:00 SRC=158.181.47.4 DST=131.215.169.100 LEN=129 TOS=0x00 PREC=0x00 TTL=108 ID=9372 PROTO=UDP SPT=6881 DPT=50753 LEN=109
Nov 17 12:26:27 Whitcomb systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Nov 17 12:26:28 Whitcomb systemd[1]: Started RealtimeKit Scheduling Policy Service.
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 17 12:26:34 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb systemd[1]: Starting Disk Manager...
Nov 17 12:26:34 Whitcomb udisksd[566]: udisks daemon version 2.0.0 starting
Nov 17 12:26:35 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb systemd[1]: Started Disk Manager.
Nov 17 12:26:35 Whitcomb udisksd[566]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 17 12:26:37 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:1 (system bus name :1.37 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Nov 17 12:26:37 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:26:37 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:06 Whitcomb systemd[1]: Starting File System Check on /dev/sdb1...
Nov 17 12:27:07 Whitcomb systemd-fsck[582]: /dev/sdb1: clean, 157018/24420352 files, 88519245/97677200 blocks
Nov 17 12:27:07 Whitcomb systemd[1]: Started File System Check on /dev/sdb1.
Nov 17 12:27:07 Whitcomb systemd[1]: Mounting /home...
Nov 17 12:27:07 Whitcomb systemd[1]: Mounted /home.
Nov 17 12:27:07 Whitcomb kernel: EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_unix(gdm-password:session): session opened for user gregory by (unknown)(uid=0)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_ck_connector(gdm-password:session): nox11 mode, ignoring PAM_TTY :0
Nov 17 12:27:13 Whitcomb systemd-logind[229]: New session 2 of user gregory.
Nov 17 12:27:13 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/1001/X11-display.
Nov 17 12:27:13 Whitcomb gnome-session[443]: WARNING: Detected that screensaver has left the bus
Nov 17 12:27:13 Whitcomb gnome-session[443]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Nov 17 12:27:13 Whitcomb polkitd[315]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Nov 17 12:27:13 Whitcomb gdm-simple-slave[311]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Successfully made thread 666 of process 666 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Supervising 4 threads of 2 processes of 2 users.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:17 Whitcomb gnome-session[603]: Gtk-WARNING: Failed to parse /home/gregory/.config/gtk-3.0/settings.ini: Key file does not have group 'Settings'
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "gnome-do" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "JRSST" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "tasque" (No such file or directory)
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Successfully made thread 705 of process 705 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Supervising 5 threads of 3 processes of 2 users.
Nov 17 12:27:19 Whitcomb pulseaudio[705]: [pulseaudio] pid.c: Daemon already running.
Nov 17 12:27:26 Whitcomb goa[766]: goa-daemon version 3.6.2 starting [main.c:112, main()]
Nov 17 12:27:26 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb gnome-keyring-daemon[601]: keyring alias directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:27 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.utf8)
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:33 Whitcomb systemd-logind[229]: Removed session 1.
I tried using gnome-tweak tool to fiddle around with the fonts, but that didn't help, none of the fonts would render correctly. Cantarell, which I'm assuming is the gnome-shell font, is still in /etc/fonts/conf.avail, so I don't think that the font file itself went missing. I made the fontconfig update a while ago, and that didn't cause any problems.
I also heard that there were problems with xorg-server, so I downgraded xorg-server, pixman, and cairo to their previous versions, but that didn't help either. EDIT: I've also done a pacman -Syyf gnome-shell to try and reinstall gnome-shell. That also didn't work.
I've run out of things to try. If someone else was more familiar with the workings of gnome-shell fonts, or had a better idea of how to debug, I'd really appreciate it. Thank you.
UPDATE: I found that /etc/fonts/conf.avail/31-cantarell.conf existed, but was empty. After doing a pacman -Syyf cantarell-fonts, they went right back to normal!
Last edited by cactaur (2012-11-20 00:21:27)Problem disappeared.
I'm not sure, but i think installing xf86-video-modesetting helped to fix this issue.
I had an error messages in /var/log/Xorg.0.log like this:
(EE) Failed to load module "modesetting" (module does not exist, 0) -
[SOLVED] Gnome 3.6: Battery/power icon missing from panel
I've recently ressurected an old Arch laptop that had been lying dormant for a year or a half. Everything's been brought up to speed (pacman -Syu plus a lot of systemd study) satisfactorily except I've noticed that the battery/power icon on the panel is missing. Due to the long time since the install, I have no idea if this is due to an error or some old brilliant idea setting from my side a year or more ago :-(
What I've tried:
* Disabling all extensions (a lot of posts about the system monitor extension causing this -- I've never used it). Extension turn off registers but still no battery.
* Checking htop and gnome power statistics to see if the system knows about my battery. Both report in detail about the battery.
* Checking /usr/share/gnome-shell/js/ui/panel.js to see if the power applet had been excluded somehow. Nope, it's listed.
* Checking dconf to see if I could find some setting there. Ubuntu user posts led me to org.gnome.power-manager but unlike those users I found no setting relevant ("icon-policy")
* Checking gnome settings and tweak settings. Found nothing that seemed relevant.
A lot of posts about this pops up around gnome 3.2 which apparently had a bug with this problem. I'm not sure what version gnome-shell was before the update but currently it is 3.6.3 and the laptop has been rebooted and had gnome-shell restarted any number of times since then.
Any suggestions?
Last edited by nervater (2013-03-23 16:11:17)Good point, WonderWoofy.
I created a guest account and found the icon on the panel when I logged in as guest. A bit of guessing located the problem to my dconf database and using gsettings to locate any power/battery-related settings pointed me to
org.gnome.settings-daemon.plugins.power
which had been deactivated. Clicking 'Active' and restarting gnome-shell solved my problem. -
Volume control missing in taskbar
I have a HP G60-235DX laptop. I have noticed that the volume control in the bottom right taskbar is missing. When I right click on the taskbar>properties>notification area, Windows will not allow me to click on volume control. When I go to control panel>sound, I cannot click on default, apply, properties or configure. I can control the volume control with the function & sound keys assocaited wit hthe side number keypad. If anyone knows how to restore this, it would be greatly appreciated. Thank you.
George
UPDATE: After exhausting all options, I turned the laptop off, then back on & the volume control reappeared in the lower right taskbar & all other volume controls are now working properly as usual. Thank you.Hi 333Help,
Welcome to the HP Forum!
Try this:
Control Panel > icon view > Notification Area Icons >
CHECK "Always show all icons and notifications on the taskbar"
OK
If you want to adjust the settings for some of the Icon Notifications individually:
UNCHECK the setting > go into the Window where the settings are located and select how you want each of the Items to respond... Once you have everything the way you like it, go back...
CHECK "Always show all icons...."
OK
I hope this helps!
Good Luck!
When you appreciate the Help you receive…
Please Click the Kudos Star on the Left to say "Thank You"!
Is it Solved? Make it easier for other people to find the Answer:
Please Mark my Post “Accept as Solution” to say "Yes!"
Remember: The more information you provide, the better help you receive.
Always Include: (Computer) Product Number , Printer – Model Number ,
Operating System and an Error Description
Never give out your Serial Number
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur -
[SOLVED] Gnome Shell 3.4.1: Unable to prevent dynamic workspaces
I am trying to turn off dynamic workspaces and set a permanent number (6) as is supposedly possible since 3.4.
Using dconf, I turn the following setting to 'false':
/org/gnome/shell/overrides/dynamic-workspaces
and enter '6' in to the following setting:
/org/gnome/desktop/wm/preferences/num-workspaces
The '6' is then immediately changed back to however many workspaces the 'dynamic' setting has created at the moment.
Bizarrely, 'overriding' effect does not occur if I change the number when 'dynamic-workspaces' is set to true. Whenever it is set to false, Gnome changes the 'num-workspaces' setting to reflect current realities.
Regardless of settings, the way it works is still 'dynamic' [grumble]worst.use.of.that.word.ever....[/grumble]
Is this a bug? Or am I just not getting it right?
(As a side note, the frippery static extension thing is currently uninstallable)
EDIT: If I try to set the number of workspaces far above what the current number is, I can see the number going down one-by-one. This would seem to indicate that the window manager is killing them off one after the other, as they aren't occupied. In other words, it's not that the new value is rejected out of hand. It's just that the WM still works dynamically.
Last edited by madchine (2012-06-15 12:57:35)[root@swanepoel ~]# pacman -Qi gnome-shell
Name : gnome-shell
Version : 3.4.1-3
URL : http://live.gnome.org/GnomeShell
Licenses : GPL2
Groups : gnome
Provides : None
Depends On : caribou folks gcr gjs gnome-bluetooth gnome-desktop
gnome-menus libcroco libpulse mutter nautilus
networkmanager telepathy-logger telepathy-mission-control
unzip
Optional Deps : network-manager-applet: shell integration for networkmanager
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 6044.00 KiB
Packager : Ionut Biru <[email protected]>
Architecture : x86_64
Build Date : Fri May 4 18:19:35 2012
Install Date : Tue Jun 12 16:18:48 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : The next generation GNOME Shell
see the man page for dconf for resetting. I 'm sure you can find it. -
[SOLVED] Gnome-Shell: Alt+F2 and PATH
Hallo everybody,
I have added $HOME/bin to my PATH with
export PATH="$HOME/bin:$PATH"
in my .bashrc.
This works fine with the terminal, but Gnome-Shell's Alt+F2 doesn't find the scripts in ~/bin.
How can I add ~/bin to the PATH of Alt+F2?
Thank you.
Last edited by lunyx (2011-09-05 09:34:41)lunyx,
Welcome to Arch. If you consider this thread solved, go ahead and edit your first post and add [SOLVED] to the beginning of the thread title. It helps those searching for solutions. The moderators don't do that, because we don't really know when members regard things as solved.
Thanks. -
[SOLVED] Gnome Shell Extensions won't install from website
When I go to https://extensions.gnome.org/ from either Chromium or Firefox, extensions fail to install. If I click the toggle to turn a new extension "ON", nothing happens. Reloading the site switches it back to "OFF".
I was able to install gnome-shell-extension-mediaplayer-git from the AUR. (Which also pulls in gnome-shell-extension-common-git.) It works fine. The problem is that most of the extensions on the AUR appear to be outdated and the users directed to the official site.
This is a relatively new install of Arch and extensions have never worked. Maybe there's a package I'm missing? Or is there a way to get any debugging output? I'm not sure where to look.
Last edited by ioos (2013-02-27 23:50:32)I found the following from AskUbuntu (not my own words, pasted from the source:
I'll take a wild stab in the dark: If you're using Chrome/Chromium, navigate to about:plugins and make sure "Gnome Shell Integration" is enabled. Then navigate back to extensions.gnome.org and when the ribbon appears at the top make sure you "Always Allow for this Site"
On Firefox you'll have to do something similar if you've turned extensions off. Browse to about:plugins and make sure libgnome-shell-browser-plugin.so is present / enabled. If it's not, upgrade Gnome Shell, or find it on your filesystem and link to it from to ~/.mozilla/plugins (you shouldn't have to do this though).
Source -
[SOLVED]Gnome-shell won't start
Hello. I cant start Gnome-shell and it force to Fallback. In addition to, in the Fallback mode, i can't change any parameters of gnome.
get this message when run the command:
gnome-shell --replace
(gnome-shell:18571): Gdk-WARNING **: The program 'gnome-shell' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 132 error_code 1 request_code 139 minor_code 66)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
I have ATI Graphic card and installed Catalyst 12.4
How can i fix it?
Last edited by vahid5695 (2012-07-03 07:07:25)demizer wrote:
Not enough information.
Are you starting Gnome through startx or GDM?
What is contained in .xsession-errors?
Do you have the testing repo enabled in pacman.conf?
Sorry for that i am new in GNU/Linux world and I didnt know what information had been needed.
Thank you for your answer.
I use GDM.
Testing repo is not enable.
and the .xsession-errors is:
[vahid@arch ~]$ cat .xsession-errors
/etc/gdm/Xsession: Beginning session setup...
localuser:vahid being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
gnome-session[779]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
GNOME_KEYRING_CONTROL=/home/vahid/.cache/keyring-hA8Z7l
SSH_AUTH_SOCK=/home/vahid/.cache/keyring-hA8Z7l/ssh
GNOME_KEYRING_CONTROL=/home/vahid/.cache/keyring-hA8Z7l
SSH_AUTH_SOCK=/home/vahid/.cache/keyring-hA8Z7l/ssh
GNOME_KEYRING_CONTROL=/home/vahid/.cache/keyring-hA8Z7l
SSH_AUTH_SOCK=/home/vahid/.cache/keyring-hA8Z7l/ssh
GPG_AGENT_INFO=/home/vahid/.cache/keyring-hA8Z7l/gpg:0:1
GNOME_KEYRING_CONTROL=/home/vahid/.cache/keyring-hA8Z7l
SSH_AUTH_SOCK=/home/vahid/.cache/keyring-hA8Z7l/ssh
(gnome-panel:855): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode: assertion `accelerator != NULL' failed
** (gnome-panel:855): WARNING **: Unable to parse mouse modifier '(null)'
Failed to play sound: File or data not found
Initializing tracker-store...
** (nm-applet:876): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
** Message: applet now removed from the notification area
Initializing tracker-miner-fs...
** (nm-applet:876): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:876): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
Tracker-Message: Setting up monitor for changes to config file:'/home/vahid/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/vahid/.config/tracker/tracker-miner-fs.cfg'
** Message: Starting applet secret agent because GNOME Shell disappeared
** (nm-applet:876): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
Starting log:
File:'/home/vahid/.local/share/tracker/tracker-miner-fs.log'
Tracker-Message: Setting up monitor for changes to config file:'/home/vahid/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/vahid/.local/share/tracker/tracker-store.log'
** Message: applet now embedded in the notification area
(nm-applet:876): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
** Message: applet now removed from the notification area
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(980) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(980) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(980) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave. -
[SOLVED] Gnome-Shell does not return any application on search
Hi.
When I search for applications in Activities in gnome-shell, no applications are returned. I can still go to the Applications tab, where all applications are visible. In the .xsession-error log I find this error
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
JS LOG: Error searching with Zeitgeist FTS: Error: DBus error: org.freedesktop.DBus.Error.UnknownMethod: Method "Search" with signature "s(xx)a(asaasay)uuu" on interface "org.gnome.zeitgeist.Index" doesn't exist
Some package information:
gnome-shell 3.2.0-2
gnome-shell-extension-alternate-tab 3.2.0-1
gnome-shell-extension-auto-move-windows 3.2.0-1
gnome-shell-extension-move-clock 1.0-1
gnome-shell-extension-pidgin-status 3.2.0-2
gnome-shell-extension-power-options 2.0-1
gnome-shell-extensions-common 3.2.0-1
gnome-shell-extension-skype-status 3.0.2-1
gnome-shell-extension-system-monitor 3.2.0-1
gnome-shell-extension-user-theme 3.2.0-1
gnome-shell-extension-workspace-indicator 3.2.0-1
gnome-shell-zeitgeist-extension-git 20111010-1
libqzeitgeist 0.7.0-1
libzeitgeist 0.3.10-1
zeitgeist 0.8.1.1-1
zeitgeist-datahub 0.7.0-1
zeitgeist-datasources 0.8.0.1-1
zeitgeist-extensions 0.0.12-1
zeitgeist-userspace 0.1-1
Remark: Before, installing zeitgeist, when searching for applications gnome-shell crashed and in the .xsession-errors I got this error
gnome-shell-calendar-server[1508]: Got HUP on stdin - exiting
. This may not be related to this problem.
Last edited by lasombra (2012-04-06 11:13:43)Well only to see if it is related to zeitgeist, I've removed (deinstalled) all zeitgeist related libs and apps:
libzeitgeist
gnome-shell-extension-zeitgeist
libqzeitgeist
zeitgeist
gnome-activity-journal
zeitgeist-datahub
zeitgeist-extensions
I still get the same error mentioned above:
gnome-shell-calendar-server[1508]: Got HUP on stdin - exiting
More details what happens if all extensions disabled
** Message: applet now embedded in the notification area
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
** Message: applet now removed from the notification area
gnome-session[3155]: WARNING: Application 'gnome-shell.desktop' killed by signal
gnome-shell-calendar-server[3381]: Got HUP on stdin - exiting
Last edited by lasombra (2011-11-05 20:09:19) -
[Solved] Gnome-Shell and separating programs in the program switcher
Hi,
I would like to treat different instances of Emacs as different programs in Super-Tab program switcher in Gnome-Shell (I run mail and music in different instances).
In the overview they show as different programs via .desktop files. But with Super-Tab they always collapse into one program (always with the normal Emacs icon).
Any tips on how to tell gnome that different instances of some program is are to be considered different applications?
Here's an example of a desktop file that I use to start a "specialized" Emacs instance.
#!/usr/bin/env xdg-open
[Desktop Entry]
Version=1.0
Name=EMMS
GenericName=Music Player
GenericName[es]=Reproductor de música
Comment=The Emacs Multimedia System.
Exec=emacsclient -s emms -ca '' --eval "(progn (setq x-resource-class \"EMMS\") (emms-smart-browse) )" -F '((title . "EMMS") (icon-type . "/home/rasmus/.local/share/icons/emms.png"))'
Icon=emms
Terminal=false
Type=Application
StartupNotify=true
Categories=AudioVideo;Player;Audio;
Last edited by Pank (2015-05-28 14:35:58)Thanks. Now, I'm calling (p-wm_class "EMMS") from my emms.desktop file now. There's also text under the icon now. Thanks a lot
Here's the defun:
(defun p-wm_class (&optional new-class)
"Return the WM_CLASS for the current window name.
If NEW-CLASS is a string or list of strings, set a new WM_CLASS.
If NEW-CLASS is non-nil remove Emacs from WM_CLASS and
WM_CLASS has more than one value."
(let ((old-class
(with-temp-buffer
(save-excursion
(call-process-shell-command
(format "xprop -name %s -f WM_CLASS 8s"
x-resource-class)
nil t))
(when (search-forward "WM_CLASS" nil t)
(search-forward "=" (line-end-position))
(split-string-and-unquote
(buffer-substring (point)
(line-end-position))
"[ \t,]"))))
;; anyway don't know how to set more than one value...
(new-class-string (cond ((and (listp new-class)
(cl-every 'stringp new-class))
(mapconcat 'identity
new-class ", "))
((stringp new-class)
new-class))))
(or
(cond ((stringp new-class)
(call-process-shell-command
(format "xprop -name %s -f WM_CLASS 8s -set WM_CLASS \"%s\""
x-resource-class
new-class))
new-class)
((and new-class (member-ignore-case "Emacs" old-class))
(call-process-shell-command
(format "xprop -name %s -f WM_CLASS 8s -set WM_CLASS \"%s\""
x-resource-class
(car (delete "emacs" (delete "Emacs" old-class)))))
(car (delete "emacs" (delete "Emacs" old-class)))))
old-class))) -
[SOLVED]Gnome Shell died
For servel times, my gnome died, and then the mouse, key board stoped working either.
Finally, l hava to force the system shutdown
i wonder why once the gnome died, the key board stop working.And is there any way to restart the gdm without restart the computer in the brute force way?
Last edited by chinaxiahaifeng (2012-05-19 06:18:53)dominik232 wrote:
Can you find what kernel vomits on this time?
Look for some logs on /var/log, maybe file /var/log/errors have something?
Keyboard and mouse stops, but what about rest of system? Have you seen something works on that time? Maybe flash animation or something? Maybe you was watching movie or listening to music at this time?
I just opened the wireless connection, less than two seconds the gnome-shell died, the keyboard and mouse stoped either;
but i can see that key CapsLk's LED turns on or off in loops.
Last edited by chinaxiahaifeng (2012-05-16 07:53:45) -
[solved] gnome-shell bad looking after update
Hi,
After update (about two weeks ago) my gnome looks bad. You can see this in screenshots. Very large icons and strange rectangles in gnome shell menu on started applications.
Can you help?
Last edited by skoczo (2015-05-01 17:27:23)eyemonen wrote:
Hi
Desktop icons: open Files (nautilus) and change default zoom level for icons from standard to small (preferences - views).
Rectangles: this is how running applications are displayed in the default theme. If those rectangles bother you too much, the easiest way is to change theme. For example, ceti-2 and vertex are already ported to 3.16.
It works. Thanks for help. -
[SOLVED] Gnome Shell doesn't search through recently used items
A while back I ran chattir +i on ~/.local/share/recently-used.xbel because of a bug that gnome shell had where it would crash while searching for recently used items. Since I've now updated to 3.4.1, I figured the bug might have been fixed, so I ran chattr -i to allow writing to the file again. The file has since filled up with my recently used items, but they don't seem to appear in the gnome shell search.
Sorry if this is a bit brief, but I'm not sure what other information to give on this problem.
Last edited by themusicalduck (2012-04-25 22:32:38)I believe this was removed with 3.4.
Here is the bug report: https://bugzilla.gnome.org/show_bug.cgi?id=670150
And here is the gnome-shell commit: http://git.gnome.org/browse/gnome-shell … 8c68782d54
Last edited by bzt (2012-04-25 17:04:57) -
[solved] Where did XFCE's volume control panel item go?
I did an update recently and noticed that the volume control panel item disappeared. So I went to add it again ... and it's not in the list! I looked in the repos and there isn't a package for it either. Where did it go?
Last edited by synthead (2008-10-30 10:50:20)peart wrote:
Hi synthead,
Is this the problem you are having?
peart wrote:
Got it. Change the last line of /usr/share/xfce4/panel-plugins/xfce4-mixer.desktop to :
X-XFCE-Exec=/usr/lib/xfce4/xfce4/panel-plugins/xfce4-mixer-plugin
I'll file a bug report.
Yes! It was. Was, as in, it's fixed now. Thanks! -
[SOLVED] Gnome Shell remove top rounded corners
There's something that lets me down with Gnome Shell's design: the rounded/circular borders on the top left and right corners of every single window on Gnome Shell.
Does anybody know how I can change this, and make them rect? Or at least rectangular on maximized windows.
Thank you!
Last edited by ephan (2012-03-26 18:49:36)gimmy wrote:Install User theme extension and then install a new theme, or edit the css in /usr/share/gnome-shell/theme/gnome-shell.css (the .panel-corner properties)
I don't want a new theme, I like Adwaita, but I just needed this changed, thank you so much! I just put the radius to 0px.
Maybe you are looking for
-
Setup a list-view in more columns
Hi, my aim is a view of listet objects ranged in several columns. The objects should not be shown in blocks separated in different pages. They should be expanded like the list view of the Windows-Explorer. So when growing up it should expand to the r
-
Ksld not breaking into source file
Hi guys, I installed ksld and started debugging my driver using a tip connection... all works fine.. i inserted a breakpoint on one of my functions in the driver.. and in the tip console once i have reached the breakpoint.. i use ::remote to enter re
-
Error on Receiver Mail Adapter (SMTP)
Hi All, I'm going to exchange message within mail to mail scenario like synchronous one. Sender Mail Adapter is running well, it can take any email in inbox. but when I want to send the email back to the sender, the receiver adapter doesn't work. her
-
Table for PO and Shopping cart combination in SRM
Hi Guys, Can any one help me out with a table which gets updated with PO and Shopping numbers in SRM.? Regards Srujank
-
Portal session not being terminated
When we upgraded from EP 6.0 to NW 2004, users started recieving the Netweaver Login Screen when they logged out and logged back in, in the same browser. We think this error occurs because NW 2004 implements Web Services Remote Portal functionality.