[SOLVED]GNOME-SYSTEM-TOOLS: The configuration could not be loaded

Hello there!
I'm a ubuntu user completely new to arch. I got my desktop up and running but there seems to be a problem setting up the gnome-system-tools program. Whenever I try to laaunch any application in this package I get this error message:
The configuration could not be loaded
You are not allowed to access the system configuration.
I tried the solution on this forum thread (http://bbs.archlinux.org/viewtopic.php?id=45854 ), but to no avail. I am still getting the same error message. This is my DAEMONS line in rc.conf:
DAEMONS=(syslog-ng hal stbd !network !dhcdbd !networkmanager wicd netfs crond alsa fam gdm)
I have added both my user and root to the stb-admin group, this is the part of my groups file that shows this:
stb-admin:x:103:root,abhishek
Can anyone please help me figure out where I'm going wrong.
Many thanks in advance.
Last edited by bhadotia (2012-02-16 00:50:03)

I was reading post installation wiki and found the following command to reinstall the whole system:
pacman -S $(comm -3 <(pacman -Qq) <(pacman -Qqm))
As a few things were not going right and I was unable to solve the problems using the ordinary methods, I decided to run the above command and now everything seems to be working fine .Though I'm not sure that this will remain like that, as the process was inturrpted a couple of times such that I had to hard reset the laptop.
But everything seems to be going fine now - the system tools have started to work normally and another gnome-related problem has been solved.:D

Similar Messages

[Solved]gnome-system-tools You are not allowed access to sys config

I did a FTP install of i686 Arch Linux on a friend's machine. I could not get gnome-system-tools to work, keep getting:
The configuration could not be loaded
You are not allowed access to the system configuration
So, I tried gnome-system-tools on an i686 Arch install on my machine, and gnome-system-tools worked. Then I did a pacman -Syu and fully updated the system. The updates included udev which now prints how long udev events took on boot up. After the updates, gnome-system-tools no longer works. Same symptoms as the new install.
Both machines have stbd in the /etc/rc.conf DAEMONS line. Both the user and root in both machines are part of the stb-admin group. Using gksu or launching as root in a terminal window results in the same problem. The problem seems to be in system-tools-backends which works in conjuntion with dbus as I get this error:
(time-admin:7607): Liboobs-WARNING **: There was an unknown error communicating with the backends:
Process /usr/share/system-tools-backends-2.0/scripts/SystemToolsBackends.pl exited with status 127
gnome-system-tools and system-tools-backends are part of the community group, so as far as I know, writing a bug report is out. Both gnome-system-tools and system-tools-backends are out of date in community. system-tools-backends is version 2.4.1 and the current version is 2.6.0. I tried using makepkg to compile the new 2.6.0 version of system-tools-backends but it fails saying it needs dbus >= 1.1.2 but version of dbus is 1.0.2. So it appears that dbus is out of date also. That is a far as I got.
I know this has been a problem in the past, but I got it working until this latest update.
Anyone got any ideas on this?
Pudge
Last edited by Pudge (2008-03-23 15:35:29)

Pudge wrote:
When I entered the Original Post, I had rebuilt gnome-system-tools as this had fixed the problem the last time. When I went to rebuild system-tools-backends, I had decided I needed to try and build the latest version of it, which didn't work as stated above. By this time the lateness of the hour, and the current frustration level caused me to quit for the night and write this thread. I am fairly sure I did NOT rebuild the current system-tools-backends.
Anyway, deleting gnome-system-tools and system-tools-backends, then rebuilding the current version of both gnome-system-tools and system-tools-backends fixed the problem. Be sure to follow the post installation comments from system-tools-backends.
I wrote a bug report in the AUR.
Bug Report
Thanks for everybody's help and suggestions.
Pudge
I've had the same problem with my users-admin and users-time... I've tried all the fixes from most of these posts... except for that string of code that someone wrote in this post: http://bbs.archlinux.org/viewtopic.php?id=42910
for file in `pacman -Ql gnome-system-tools | grep desktop | cut -d" " -f2`; do cat $file | sudo sed 's/$^Exec=$$.*-admin$/\1gksudo \2/g' | sudo tee temp.desktop.tmp; sudo mv temp.desktop.tmp $file; done
I wasn't sure what this string actually would do, so I haven't tried it yet. I figured there would be an easier way of fixing this problem. Like a simple edit in the SystemToolsBackends.pl file.....
any help would be cool.

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements

The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.

Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave

0x80230729 (The extension could not be loaded.)

Hi,
I've been working on this most of the day without any luck. I'm wondering if anyone has seen something like this.
PCNS can successfully deliver the password change to an AD target, so PCNS should be OK.
The failure occurs when we add the Oracle EBS Web Service management agent to the password sync targets.
The error message indicates that the Microsoft.IdentityManagement.WebService.MA.dll cannot be loaded due to an incorrect .NET framework version.
An unexpected error has occurred during a password set operation.
"BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(322): 0x80230729 (The extension could not be loaded.)
ERR_: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(804): Please verify that the password extension dll can be located in the Extensions directory.
If the extension is present, confirm that the version of the .NET framework that can run the extension is installed on the server and that a supportedRuntimes entry in the configuration files specifies that version. The synchronization engine will not be able
to load an extension that is built with a newer version of the .NET framework than the version of the .NET runtime it is hosting.BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(806): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2821): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2866): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\exportpassword.cpp(474): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(7961): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(8410): 0x80230729 (The extension could not be loaded.)
Forefront Identity Manager 4.1.2273.0"
I ran an Environment.Version command and it returns that we are using 4.0.30319.296.
In the dllhost.exe.config file, we have the settings:
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
<section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"></supportedRuntime>
<supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
<bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
So, I think it looks like it should be trying to run the dll under the 4.0.30319 framework. The documentation says that framework is required and we are running it.
The dll is in the Extensions folder.
Has anyone seen this before or something like it? Any ideas on where else I could check?
Thanks,
Sami

Thank you for your reply. I've tried running in and out of proc with the same error showing up.
I tried a few different modifications to the miiserver.exe.config (as well as Mmsscrpt.exe.config and the Dllhost.exe.config files). I tried changing 4.0.30319 to 4.0 as per this article:
http://msdn.microsoft.com/en-us/library/w4atty68.aspx
Even though we are only on FIM R2 (not on SP1), I tried a variation on the config file changes recommended here:
http://support.microsoft.com/kb/2772429 but I referenced the newVersion as 4.0.1.0.
Still no luck.
Here's the miiserver.exe.config file. Maybe you'll see something glaringly wrong? Thank you for your help!
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
    <section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
    <section name="resourceManagementService" type="Microsoft.ResourceManagement.WebServices.ResourceManagementServiceSection, Microsoft.ResourceManagement.Service"/>
    <section name="resourceSynchronizationClient" type="MIIS.ManagementAgent.ResourceSynchronizationClientSection, mmsmafim"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>

<resourceSynchronizationClient/>

    <system.diagnostics>
        <sources>
            <source name="ForefrontIdentityManager.ManagementAgent" switchValue="Warning">
                <listeners>
                    <add initializeData="ForefrontIdentityManager.ManagementAgent" type="System.Diagnostics.EventLogTraceListener, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089"
                         name="MAExceptionEventLogListener" traceOutputOptions="LogicalOperationStack, DateTime, Timestamp, Callstack">
                    <filter type="" />
                    </add>
                </listeners>
            </source>
            <source name="ForefrontIdentityManager.ManagementAgent.EventTracingForWindowsTraceSource" switchValue="Verbose">
                <listeners>
                    <add name="MAEventTracingForWindowsListener"
                         type="System.Diagnostics.Eventing.EventProviderTraceListener, System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
                         initializeData="{C4D0C1D4-909D-481b-B011-10E682A6009C}" />
                </listeners>
            </source>
        </sources>
    </system.diagnostics>
    
    
    

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
        <bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
        <bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
      </dependentAssembly>
    </assemblyBinding>
</runtime>
</configuration>

I receive the message: "The extension could not be loaded because it was not properly signed."

When I try to open the Library in Photoshop, I receive the message: "The extension could not be loaded because it was not properly signed." It worked last week, but now I get this message and the Library is completely empty in Illustrator. My Library has stuff in it and I can see it on my iPad Apps.

I am working on a PC, using Photoshop CC 2014
Operating System:
Error Message:
Settings in Photoshop > Preference > Performance:
Type of file you were working on: No file; just opened up Photoshop to begin working
This is the first time this has happened - I have not doe any other troubleshooting.
Camera Raw does not apply here.
Thanks.

Could not complete the command because the extension could not be loaded

I was working in 3D with PS CS5 Extended. I went to the Window drop down menu and selected Color. I got the message "Could not complete the command because the extension could not be loaded" and the color pallet and swatches would not appear. I had to click on OK the error message three times to get rid of it as it kept reappearing. The the mini bridge and Brush pallets opened, including Brush Presets tab and Clone Source tab instead of the color pallets. How can I get my color pallets back?
I am on an iMac Intel core i3 running OS X Lion 10.7.2
Thanks for any help.
Thanks,
Don

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS

I am trying to open a .prprj worked yesterday but I get this msg: THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS
I tried to import it in a new project, import it in AE, open an aotosaved project (there are so old, not usefull)
I know that it can be edited in XML, but I don't understand anythig of that...
HOW DO I REPAR IT???
Any help???

Hi,
thanks for for the comment! In fact I did try this and I also tried to import a sequence only. I haven´t changed anything but I guess the automatic update of windows 8.1. has.
And then I noticed that I´m not at all alone with my problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
So the final solution seems not to be in my hands ;~)
Cheers,
Petri

"Cannot complete command because the extension could not be loaded." with CEP5 Sample

Hi,
I have trouble with porting my extension to CEP5. I am getting error "Cannot complete command because the extension could not be loaded." when I open the panel.
Is there any way to get more info about what happened and why? My extension was properly signed zxp and Extension Managed installed it without trouble.
Also, to debug the problem, I tried to open the CEP HTML Test Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0
I have copied it to "~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST", created .debug file in it (https://gist.github.com/m6k/39a49786b7a85a9e312b), created empty .debug file inside Photoshop CC 2014.app (to suppress signature checking). When I open Photoshop CC 2014, I see test panels listed in extension menu, but when I try to open them, I also get the "Cannot complete command because the extension could not be loaded." error.
Any hints what i am doing wrong and what can I do to debug this problem?
Jan

Hallgrimur, thanks, that is exactly the article I needed!
My problem was that I forgot about the pref file "~/Library/Preferences/com.adobe.CSXS.5.plist".

"Cannot complete command because the extension could not be loaded" ?

I have installed a photoshop plugin into photoshop cc. However when I go to windows => extension => photoshop plugin, it shows me "Cannot complete command because the extension could not be loaded". What should I do ?
Thanks.

I think you posted on the »wrong« Forum. (edited)
http://forums.adobe.com/community/labs/extensionbuilder3?view=discussions

Get message Cannot complete command because the extension could not be loaded.

When clicking in CS5 Photoshop menu - "Essentials", "New is CS5 "or "CS LIve", I get a message "Cannot complete command because the extension could not be loaded". I get the same message when attempting to acces frm Window>Extensions> then clicking on one of the listed exteneions. This is been going on for some time for no apparent reason. Using version 12.0.4 (x32) iMac OS 10.6.8 - Intel Quad Core.

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

PS show The extension could not be loaded because it was not properly signed

When I'm open Libraries in photoshop cs2014 it's show
The extension could not be loaded because it was not properly signed
I'm try to reinstalled but it still error.
How can i'm fixed this

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Configuration framework system error - the configurable won't be loaded

Hi, I have followed the tutorial on how to url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Resource%20List%20Filters%20for%20Flexible%20UI%20Navigation/index.htm]Implement a Resource List Filters for Flexible UI Navigation[/url]
When uploading my par file into the portal, I get following error in the defaulttrace file, although the filter works :
<i>[synchronizer_(config://install/cm/services/resourcelistfilter)_(source:config://import/install/data/cm/services/resourcelistfilter)] cannot load [(configurable: SimpleTbpResourceListFilter:ResourceListFilter)] : ConfigException: Configuration framework system error: "id consistency error on [SimpleTbpResourceListFilter != SimpleTBPResourceListFilter] : the configurable won't be loaded ! please, check file name..."</i>
Seems like it's related to the configuration of the .co.xml file. Like in the tutorial I have created this file in location src.config - install - date - cm - services - resourcelistfilter (this folder had to be created manually, not generated by the RF wizard).
<u><b>_simple_tbp_resource_list_filter.co.xml</b></u>
<?xml version="1.0" encoding="UTF-8" ?>

<Configurable configclass="ResourceListFilter">
<property name="classname" value="z.imec.flexsort.filter.SimpleTBPResourceListFilter"/>
<property name="description" value="A sample implementation of a resource list filter. Filters out documents with TBP Valid From and Valid To properties."/>
<property name="alias" value="SimpleTBPResourceListFilter"/>
</Configurable>
<u><b>configArchive.properties</b></u>
# com.sap.portal.pdk.srv.config
ca.name=SimpleTBPResourceListFilter.prjconfig
ca.version=6.0.1.1
ca.creation.time=1708
ca.creation.date=20070425
ca.creation.user=Kevin Laevers
ca.creation.machine=unknown
ca.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
cma.name=SimpleTBPResourceListFilter.prjconfig
cma.version=6.0.1.1
cma.storage=sfs
cma.creation.time=1708
cma.creation.date=20070425
cma.creation.user=Kevin Laevers
cma.creation.machine=unknown
cma.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
Any idea on the message in the defaulttrace file?
Thanks :o)
Kevin

Hello,
Can you please explain what exactly the issue? I'd like to know any issues you are having with the video workflow.
Thanks,
Vish

The project could not be loaded, it may be damaged or contain outdated elements.

Hi,
I need help, desperately!
I was working today with a small project. I was almost ready, just some titles missing...
Suddenly I could not load the project anymore. I got these messages (see below).
I´m using Premiere Pro CS 6 from my hard disk. Operating system is Windows 8.1.
Never had this kind of problems before. I can still load other, previous projects without a problem.
Is there a solution for this?
petrihan

Hi,
thanks for for the comment! In fact I did try this and I also tried to import a sequence only. I haven´t changed anything but I guess the automatic update of windows 8.1. has.
And then I noticed that I´m not at all alone with my problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
So the final solution seems not to be in my hands ;~)
Cheers,
Petri

In Photoshop CS 6 (64 & 32), I get the error "cannot complete command because the extension could not be loaded". I can click to pass this, but none of my extensions will run. If I click on "browse in Bridge" I get "Could not complete the command Browse

Further info is that I have a current update of the JavaScript as of now, my Adobe software is all updated, as is my Windows 7 software. Everything was running fine until yesterday, and the only changes to my system were the Tuesday Windows updates. Can anyone help me resolve this problem?

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

[SOLVED]GNOME-SYSTEM-TOOLS: The configuration could not be loaded

Similar Messages

Maybe you are looking for