[SOLVED] GNOME won't start properly
Hello,
I have just started with Arch and already encountered a newbie problem I installed Arch ok using the beginner's guide, the base system is ok, I got up to the point of installing desktop environment (GNOME3 is my choice). I installed mesa, drivers, X etc and Gnome ofc. I added "... dbus gdm..." into DAEMONS array and rebooted. The blue Gnome wallpaper shows normally but the login window is not the usual black Shell one, but grey old-looking instead (fallback mode?). I've got only the ugly X's clock cursor but I can click on my user's name and login. However, nothing appears, just the same blue background and the clock cursor
Anyone has an idea what I might be doing wrong? Thanks
Last edited by phobossion (2012-02-11 09:29:09)
phobossion wrote:
Hello,
I have just started with Arch and already encountered a newbie problem I installed Arch ok using the beginner's guide, the base system is ok, I got up to the point of installing desktop environment (GNOME3 is my choice). I installed mesa, drivers, X etc and Gnome ofc. I added "... dbus gdm..." into DAEMONS array and rebooted. The blue Gnome wallpaper shows normally but the login window is not the usual black Shell one, but grey old-looking instead (fallback mode?). I've got only the ugly X's clock cursor but I can click on my user's name and login. However, nothing appears, just the same blue background and the clock cursor
Anyone has an idea what I might be doing wrong? Thanks
Please post your rc.conf. Also, which video card and drivers and how did you install Gnome?
Similar Messages
-
Dear archies,
I using fluxbox right now but I wanted migrate to Gnome 3.2.1 but I have problem with start. I used lxdm as login manager (becase there I can chooose session - but I tried gdm also with the same result). Login was OK but then I got just gnome default "blue-zebra" background and that's all... No gnome-shell, no gnome-panel, nothing. Computer doesn't freeze but no desktop. Fluxbox starts normal.
Here is my etc/rc.conf
[zrebec@bella ~]$ cat /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Bratislava"
KEYMAP="sk-qwertz"
CONSOLEFONT="lat2-16"
CONSOLEMAP="8859-2"
LOCALE="sk_SK.UTF8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(fuse vboxdrv)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME="bella"
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
NETWORKS=(eth0 eth1)
# DAEMONS
DAEMONS=(syslog-ng network crond gpm alsa dbus net-profiles avahi-daemon lxdm httpd postgresql)
I using proprietary nvidia driver but drivers works very fine.
Last edited by Nelly (2012-02-19 16:42:01)It also sounds a lot like this issue.
The solution there seemed to be (re)installing gnome-shell and libltdl.
Also, have you tried gdm? I don't know the ins-and-outs but it seems gdm is becoming more important for a functional gnome session.
Last edited by Trilby (2012-02-17 01:18:13) -
[SOLVED] GDM/Gnome won't start after update
Today after I run pacman -Suy, GDM/Gnome won't start anymore after reboot. The error message I get after GDM starts is:
Oh no! Something has gone wrong.
A problem has occurred and the system can't recover. Please contact a system administrator
Does anyone have any idea what happened and how can I recover the system?
Here is the complete log for the update:
http://bpaste.net/show/209520/
Here is the journalctl -u gdm log:
http://sprunge.us/LEOU
Here is tail -2000 /var/log/messages.log:
http://sprunge.us/ObWY
And here is the /var/log/Xorg.0.log:
http://bpaste.net/show/209549/
I can't imagine any other log file that might help figure out what happened, let me know if there's anything else.
Any help is appreciated. Thanks.
Edit: I stopped gdm, created a ~/.xinitrc and could successfully start Gnome with startx. The problem remains with GDM.
Edit: The last update solved my problem: http://sprunge.us/RKWA
Last edited by falmp (2014-04-22 20:38:20)I'm not sure my issue is really the same one, but am hoping for some guidance here if possible. Trying to start GDM gives me the same error message/screen. After tdm fails I can switch to a console,
sudo systemctl stop gdm.service
then
sudo systemctl start lightdm.service
and lightdm starts fine. However, trying to log in to gnome-session gives me the very same error as I had with GDM. I can log into XFCE just fine. Attempting to start gnome-ession via startx also gives me the error screen. Does anyone know how I can diagnose the problem? Thanks,
Matt -
I was trying to move photos to an external hard drive because my startup disk was full and I accidentally dropped them onto the desktop. Now my computer won't start properly because of all the stuff on the desktop and I don't know how I can fix that?
Start up in safe mode. Hold the Shift key while your Mac is starting and check that you can start up in safe mode. Then, choose all the items you want to transfer in Desktop by pressing Command and A keys, and move them to the external drive.
If you have any file in Desktop that you don't want to transfer, simply click it while pressing the Command key -
Macbook Pro won't start properly... keeps restarting without chime!
Macbook Pro won't start properly... keeps restarting without chime!
Late 2007 Macbook pro. OS upgrade worked great for me.
I have had this problem on and off for a month or so. I simply cannot figure out what the issue is. I have tried poerup with and without AC power and with/without battery installed.
Starting in Safe mode does not help.
Trying to start with a disk does not help.
It sort of seems like it might be an internal power issue or GPU issue.
It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
I have three different anti-virus programs so I doubt it is a virus issue.
I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion. Fusion seemed to just bog down the computer horribly but did not cause a system crash.
I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
Anyone who has had this problem and resolved it please let me know
God blessSystematically run through this list of fixes.
..Step by Step to fix your Mac
If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software. -
[NOT SOLVED] Gnome will not start
I'm editing this original message by way of summing up so that anyone coming here with a similar problem will know what to expect if they read further:
I believe the reason Gnome would not start on the machine in question was that it made too many demands on the available hardware (see desm0te's comments below).
For this reason I decided to switch to LXDE as Desktop Environment which works well on the restricted hardware. I did not investigate the Gnome related problem any further.
The original message follows:
After a successful installation of the basic command-line Arch according to the Beginner's Guide, I went on to install Gnome according to instructions in the Wiki.
I Did not want Gnome to start automatically but only when I type in the command startx.
This it does, but all I get is the nice blue "curtain" background - no black bar at top of screen with Actions, date , name etc...
and no cursor.
One funny thing was - this afternoon while I was concentrating on another machine - the black bar suddenly appeared (apparently for no reason) showing the date and my name but with the X cursor
from the X11 environment. However as soon as I moved this cursor to the bar and clicked, both dursor and bar disappeared never to return .
I decided to redirect the stderr of startx to a file in the hope that it would give a clue as to what was wrong.
X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686
Current Operating System: Linux pdv 3.2.2-1-ARCH #1 SMP PREEMPT Thu Jan 26 08:28:27 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro vga=773
Build Date: 29 January 2012 03:41:53PM
Current version of pixman: 0.24.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 3 21:13:19 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
[10f] 320 x 200, 70Hz
[134] 320 x 240, 72Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[11e] 640 x 400, 70Hz
[112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[115] 800 x 600, 60Hz, 75Hz, 85Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17b] 1280 x 768, 60Hz
[16a] 1280 x 960, 60Hz, 85Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[124] 1600 x 1200, 60Hz
(gnome-shell:770): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to find suitable fbconfig for the GLX context: Failed to find any compatible fbconfigs
Window manager error: Unable to initialize Clutter.
Failed to play sound: File or data not found
Tracker-Message: Setting up monitor for changes to config file:'/home/dick/.config/tracker/tracker-miner-fs.cf** Message: applet now removed from the notification area
(nm-applet:789): libnotify-WARNING **: Failed to connect to proxy
** (nm-applet:789): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:789): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:789): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
Tracker-Message: Setting up monitor for changes to config file:'/home/dick/.config/tracker/tracker-store.cfg'
(tracker-store:791): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
(tracker-miner-fs:788): Tracker-CRITICAL **: Empty locale file found at '/home/dick/.cache/tracker/miner-applications-locale.txt'
(gnome-settings-daemon:668): color-plugin-WARNING **: failed to get edid: unable to get EDID for output
(tracker-miner-fs:788): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
(tracker-miner-fs:788): Tracker-CRITICAL **: Empty locale file found at '/home/dick/.cache/tracker/miner-applications-locale.txt'
xinit: connection to X server lost
waiting for X server to shut down gnome-session[655]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Server terminated successfully (0). Closing log file.
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GVFS-RemoteVolumeMonitor-WARNING **: cannot remove match rule 'type='signal',interface='org.gtk.Private.RemoteVolumeMonitor',sender='org.gtk.Private.GduVolumeMonitor',': org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(tracker-miner-fs:788): GVFS-RemoteVolumeMonitor-WARNING **: cannot remove match rule 'type='signal',interface='org.freedesktop.DBus',member='NameOwnerChanged',arg0='org.gtk.Private.GduVolumeMonitor'': org.freedesktop.DBus.Error.Disconnected: Connection is closed
xinit: unexpected signal 2
If this gives clues could someone please point me in the right direction? Are the two EE messages significant (Failed to load modules "vesa" and "fbdev"). What is Clutter*? What should I do to get it initialized?
Thanks for any help.
Dick Summerfield (aka Battus).
* Sorry about that - it's an open source graphics library for creating hardware-accelerated user interfaces - but am I any the wiser for that
Last edited by Battus (2012-02-21 19:48:23)desm0tes:
To take your points one by one:
1. I am now quite happy with LXDE too. The problems I mentioned last night seem to have gone (???!!!) and I can just start LXDE from my user account. Maybe later, I'll realize what I was doing wrong or rather what I did to make it work... . Now I just type:
startx
having put:
exec ck-launch-session startlxde
in .xinitrc.
2. Thanks for the tip about yaourt. I shall try that sooner or later.
3. Well as I said - I don't understand what I was doing wrong - which makes me feel a bit stupid and is rather annoying but looking on the bright side it's fine to be able to start-up, have a legible screen and logout successfully - which I couln't do before. I now have to figure out how to expand the contents of LXDE a bit but that's the fun of it!
LXDE starts up nicely with minimal possibilties but I can change look & feel and customize the panel settings.
"Menu" contains:
Accessories:
File Manager
Image Viewer
LXTerminal
Leafpad
Xarchiver
Internet:
Avahi SSH Server Browser
Avahi VNC Server Browser
Office:
ePDFViewer
System Tools:
Avahi Zerconf Browser
Task Manager
Preferences:
Customize Look and Feel
Monitor Settings
OPenbox Configuration Maanger
Preferred Applications
Run
Logout
All of these start up OK and work, on cursory examination, except the Avahi Browsers which I don't understand and which appear to do nothing as no window appears on screen.
4. I'm not quite sure I can yet see the use of a login manager such as SLiM, since I seem to get on quite nicely without it but since I've heard it mentioned a lot I'm sure I'm just missing the point.
Dick Summerfield (aka Battus)
Last edited by Battus (2012-02-06 19:56:30) -
[SOLVED] Audacious won't start
audacious
WARNING: Audacious seems to be already running but is not responding.
(audacious:1810): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1810): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1810): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1810): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
[1] 1810 segmentation fault (core dumped) audacious
Audacious is not running, or it's not in the process list.
The GTK errors surely won't start it from running, as other GTK apps display that but they still work too. Seems something is going wrong with mowgli, which I have reinstalled.
Just rebooted and tried again, now it's an abort error not a segfault:
audacious
WARNING: Audacious seems to be already running but is not responding.
(audacious:786): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:786): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:786): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:786): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
[1] 786 abort (core dumped) audacious
EDIT: Now this is getting weird. I have steam on my PC, and I went and played TF2 for a few minutes, took a screenshot, then exited the game. I'm now getting the audacious errors in STEAM's console output. WHAT.
SDL video target is 'x11'
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system DOES NOT support the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
Installing breakpad exception handler for appid(gameoverlayui)/version(20121214145418_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
[1219/184327:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
Using breakpad crash handler
Setting breakpad minidump AppID = 440
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(440)/version(5148_client)
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197989209372 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561197989209372
ConVarRef m_rawinput doesn't point to an existing ConVar
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 1047872, Total Avail: 1048576, Current Avail: 838248
GL_MAX_SAMPLES_EXT: 32
(process:1091): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
[1219/184328:ERROR:resource_bundle.cc(411)] Failed to load /media/F/steam4linux/Steam/SteamApps/briandam8/Team Fortress 2/cef_gtk.pak
Some features may not be available.
[1219/184328:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 3701 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 4294967295
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 3701 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 4294967295
IDirect3DDevice9::Create: BackBufWidth: 1920, BackBufHeight: 1080, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
Loaded program cache file "glbaseshaders.cfg", total keyvalues: 266, total successfully linked: 266
Loaded program cache file "glshaders.cfg", total keyvalues: 596, total successfully linked: 596
Precache: Took 4507 ms, Vertex 1000, Pixel 2124
Game.so loaded for "Team Fortress"
Installing breakpad exception handler for appid(hl2_linux)/version(1.0_client)
Installing breakpad exception handler for appid(hl2_linux)/version(1.0_client)
Game update: AppID 440 "Team Fortress 2", ProcID 1091, IP 196.38.180.26:27015
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(steam)/version(1355789024_client)
Installing breakpad exception handler for appid(steam)/version(1355789024_client)
Game removed: AppID 440 "Team Fortress 2", ProcID 1091
saving roaming config store to 'sharedconfig.vdf'
roaming config store 2 saved successfully
WARNING: Audacious seems to be already running but is not responding.
(audacious:1163): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1163): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1163): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1163): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1181): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1181): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1181): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1181): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1198): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1198): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1198): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1198): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1215): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1215): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1215): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1215): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
It seems to display that error every time I click the "Show on disk" button on the screenshot manager.
Something is very broken.
Last edited by biltong (2012-12-19 18:39:49)Well changing back to my normal theme after starting audacious works. So that's a plus. I still don't get how it affected steam.
Or reinstalling it worked, because now Audacious is starting fine with my normal theme. This is really strange.
Okay I figured out why the errors were showing up in steam. For some reason, steam tries to open audacious as my file manager instead of nemo.
Last edited by biltong (2012-12-19 18:39:33) -
Hey everyone!
I was just installing Arch on my Desktop few moments ago and decided to give Kdemod4 a try,
but it simply won't start up showing me this error: (in a xtermlike environment)
Could not start kstartupconfig4. Check your installation.
Wondering how to solve this problem...?
So far concerning the installation everything worked quite fine...XServer works with xterm and hal fam and kdm were added to the Daemons array in rc.conf...
After I get back to the tty I also get these lines:
Could not init font path element /usr/share/fonts/Type1, removing from list!
/usr/bin/startkde: line11: /usr/bin/kcheckrunning: File or directory not found
/usr/bin/startkde: line36: /usr/bin/kde4-config: File or directory not found
/usr/bin/startkde: line86: /usr/bin/kstartupconfig4: File or directory not found
But: when I DO have those files, namely kcheckrunnig, kde4-config and kstartupconfig4, in /usr/bin...
So seems like something went wrong there...it's just that I can't figure out what...
Thank for your help in advance!
Cya
Rittler
Last edited by Rittler (2009-01-06 17:22:03)xorg.conf and xorg log (/var/log/) could be usefull when asking for help.
Here you are...
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
#RgbPath "usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "freetype"
Load "record"
Load "GLcore"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 490 320 # mm
Identifier "Monitor0"
VendorName "GSM"
ModelName "L226W"
HorizSync 28.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "RV670PRO [Radeon HD 3850]"
BusID "PCI:1:0:0"
#Option "XAANoOffscreenPixmaps" "true"
#Option "AGPMode" "4"
#Option "ColorTiling" "on"
#Option "AccelMethod" "EXA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
xorg log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux odin@arch 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 23:24:22 CET 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 22 06:56:59 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV670PRO [Radeon HD 3850] rev 0, Mem @ 0xd0000000/268435456, 0xfe8f0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(WW) fglrx: Force AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:56:52
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x9505) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x13f6a30
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI Radeon HD 3850" (Chipset = 0x9505)
(--) fglrx(0): (PciSubVendor = 0x18bc, PciSubDevice = 0x3812)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe8f0000
(--) fglrx(0): I/O port at 0x0000b000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.73
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV670
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000080, disabled=0x00000000
(II) fglrx(0): Connected Display1: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM Model: 566b Serial#: 135716
(II) fglrx(0): Year: 2007 Week: 11
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 150 MHz
(II) fglrx(0): Monitor name: L226W
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff001e6d6b5624120200
(II) fglrx(0): 0b110103ea312078eaaec5a2574a9c25
(II) fglrx(0): 125054a76b80950081808140714f0101
(II) fglrx(0): 0101010101017c2e90a0601a1e403020
(II) fglrx(0): 3600da281100001a21399030621a2740
(II) fglrx(0): 68b03600da281100001c000000fd0038
(II) fglrx(0): 4b1c530f000a202020202020000000fc
(II) fglrx(0): 004c32323657200a202020202020001d
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on secondary TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 43 modes found for primary display.
(--) fglrx(0): Virtual size is 1680x1050 (pitch 0)
(**) fglrx(0): *Mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +vsync (64.7 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"x47.0 29.60 800 816 896 992 600 601 604 635 interlace +hsync (29.8 kHz)
(**) fglrx(0): Default mode "720x576": 26.6 MHz (scaled from 0.0 MHz), 29.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "720x576"x50.0 26.56 720 736 808 896 576 577 580 593 +hsync (29.6 kHz)
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (490, 320) mm
(--) fglrx(0): DPI set to (87, 83)
(--) fglrx(0): Virtual size is 1680x1050 (pitch 1728)
(**) fglrx(0): *Mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +vsync (64.7 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"x47.0 29.60 800 816 896 992 600 601 604 635 interlace +hsync (29.8 kHz)
(**) fglrx(0): Default mode "720x576": 26.6 MHz (scaled from 0.0 MHz), 29.6 kHz, 50.0 Hz
(II) fglrx(0): Modeline "720x576"x50.0 26.56 720 736 808 896 576 577 580 593 +hsync (29.6 kHz)
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x80000009
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7f5d7e046000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01008000
(II) fglrx(0): FBMM initialized for area (0,0)-(1728,2432)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1728 x 1382
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 90
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
Could not init font path element /usr/share/fonts/Type1, removing from list!
(II) config/hal: Adding input device Microsoft Microsoft Wheel Mouse Optical?
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Microsoft Microsoft Wheel Mouse Optical?: always reports core events
(**) Microsoft Microsoft Wheel Mouse Optical?: Device: "/dev/input/event2"
(II) Microsoft Microsoft Wheel Mouse Optical?: Found 3 mouse buttons
(II) Microsoft Microsoft Wheel Mouse Optical?: Found x and y relative axes
(II) Microsoft Microsoft Wheel Mouse Optical?: Configuring as mouse
(**) Microsoft Microsoft Wheel Mouse Optical?: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wheel Mouse Optical?: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wheel Mouse Optical?" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
I suggest gamin instead of fam, and /etc/inittab to start kdm/gdm instead of rc.conf
http://wiki.archlinux.org/index.php/FAM
http://wiki.archlinux.org/index.php/Login_manager
The kdm-thing does not work so far...but I'm workin' at it
Concerning fam...I'll try that
onna assume you have nvidia since it rejects type1 paths...
http://wiki.archlinux.org/index.php/NVIDIA
basically make sure theres no type1 path or dri stuff as the wiki says.
Nope it's an Ati Radeon HD3850 I got there...
Make sure you read about hotplugging if you havent...
http://wiki.archlinux.org/index.php/Xor … otplugging
Got that...
Make sure you installed kdemod correctly...
http://chakra-project.org/download-kdemod.html
Is installed correctly and working with catalyst - didn't work with xf86-video-radeon(hd)...
Still as you can see there are some warnings in the Xorg logfile I have to work on.
Though kdemod4 now starts up upon an 'startx' I won't mark the thread 'solved' till I got everything working correctly...
Any suggestions upon improvement of my configurations are highly appreciated!
Thanks for your help so far AND in advance!
Cya
Rittler -
[SOLVED] Apache won't start; missing 4 modules
Hello,
Not sure if this is the correct place to post this, but httpd won't start after an update.
First it claims each of these 4 modules are missing:
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
If I comment these in httpd.conf, the error changes to
httpd: Configuration error: No MPM loaded.
Can anyone please help?
Thanks!
Last edited by r0cz (2014-03-15 16:45:22)progandy wrote:
nparasta wrote:Oh okay. Yes I actually removed them. In httpd.conf I had set some apache settings, though most of the settings were on their default values. I should maybe re-install apache to get the new files back and redo my settings since the files are so different.
You might want to do that. that is why pacdiff offers the merge option.
PS: Here is an overview of the changes between 2.2 and 2.4: http://httpd.apache.org/docs/2.4/upgrading.html
This solved my problem. Thank you for all your help :-)
Last edited by nparasta (2014-03-24 06:47:01) -
[SOLVED] Alsa won't start after upgrade
This is my last update:
[2010-07-18 08:59] Running 'pacman -Syu'
[2010-07-18 08:59] synchronizing package lists
[2010-07-18 08:59] starting full system upgrade
[2010-07-18 09:00] upgraded gtk-aurora-engine (1.5.1-1 -> 1.5.1-2)
[2010-07-18 09:00] #####################################
[2010-07-18 09:00] themes are moved in an extra package:
[2010-07-18 09:00] community/murrine-themes-collection
[2010-07-18 09:00] upgraded gtk-engine-murrine (0.90.3-1 -> 0.90.3-2)
[2010-07-18 09:00] upgraded imagemagick (6.6.2.0-22 -> 6.6.2.10-1)
[2010-07-18 09:00] Running OSS update script...
[2010-07-18 09:00]
[2010-07-18 09:00] -------------------------------------------------------------
[2010-07-18 09:00] Open Sound System was updated. Now you should restart the
[2010-07-18 09:00] daemon by running /etc/rc.d/oss restart.
[2010-07-18 09:00]
[2010-07-18 09:00] Please note that OSS stores some of its configuration files
[2010-07-18 09:00] at /usr/lib/oss. If you are upgrading from an older OSS
[2010-07-18 09:00] release and it doesn't work properly, try removing that
[2010-07-18 09:00] directory and reinstall this package.
[2010-07-18 09:00] -------------------------------------------------------------
[2010-07-18 09:00] upgraded oss (4.2_2002-2 -> 4.2_2003-1)
[2010-07-18 09:00] upgraded supertux (0.3.1-5 -> 0.3.3-1)
[2010-07-18 09:00] upgraded xine-lib (1.1.18.1-1 -> 1.1.18.1-2)
Pacman said to restart oss, so I did it. But I got loads of errors and a [FAIL], then I rebooted and got a [FAIL] for shutting down alsa.
Now alsa won't start at boot.
sudo /etc/rc.d/alsa start
Password:
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1610: No soundcards found...
[FAIL]
And alsamixer won't run too:
alsamixer
cannot open mixer: No such file or directory
What can I do to fix this?
EDIT: I just removed the oss package and now it works fine
Last edited by spiridow (2010-07-18 08:17:16)startx at the command line.
I just tried Xorg -reconfigure again, adding the AutoAddDevices = false option - still doesn't work, giving the error about config/hal. Without the option, it just goes back to the terminal with no errors.
Pacman log says the only thing upgraded today (after pacman) was the kernel, nvidia, and kernel-firmware. cdfs conflicted with the new kernel, so I removed it. Then I rebooted, and X stopped working. Downgrading those back again doesn't fix it. I don't get it.
>>EDIT:
Okay - what does cdfs have to do with Xorg???? This makes no sense. I downgraded the kernel pkgs and nvidia again, and this time installed cdfs, which I forgot to do last time. Now X starts. I don't really get it.
Maybe hal in xfce or some plugin needs to use cdfs for something?? I don't really know - but I'm just glad it's working. I guess I'll file a bug report for cdfs so it can be built to the new kernel and hold off upgrading until it's fixed with 2.6.31. sheesh! too weird.
Last edited by userlander (2009-10-10 23:27:36) -
[SOLVED] samba does not start properly again -this time with systemd
Definitely no luck with this one...
So, today I've switched to a pure systemd init system, and noticed that I have this old issue again.
(Link to my old thread: https://bbs.archlinux.org/viewtopic.php?id=142704)
Samba doesn't start properly again, more precisely smbd is launched but not nmbd, so samba is not working as it should (for example smbtreee lists nothing).
Last time I've solved it by putting samba long before networkmanager in the daemons array, but with systemd I'm a bit confused...
Anyone has this issue?
Last edited by scar (2012-11-03 07:05:42)I think that nmbd isn't waiting for networkmanager to start on my system, because I'm getting journal entries like
Oct 31 00:47:21 spacebar winbindd[431]: [2012/10/31 00:47:21.556005, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:21 spacebar systemd[1]: nmbd.service: main process exited, code=exited, status=1
Oct 31 00:47:21 spacebar systemd[1]: Unit nmbd.service entered failed state.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): carrier now ON (device state 20)
Oct 31 00:47:22 spacebar kernel: r8169 0000:03:00.0: eth0: link up
Oct 31 00:47:22 spacebar kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Auto-activating connection 'Static'.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) starting connection 'Static'
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started...
Oct 31 00:47:22 spacebar rpc.mountd[462]: Version 1.2.6 starting
Oct 31 00:47:22 spacebar systemd[1]: Startup finished in 3s 850ms 155us (kernel) + 21s 279ms 972us (userspace) = 25s 130ms 127us.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Oct 31 00:47:23 spacebar ntpd_intres[441]: DNS 0.au.pool.ntp.org -> 116.66.160.39
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Policy set 'Static' (eth0) as default for IPv4 routing and DNS.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) successful, device activated.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete.
Oct 31 00:47:23 spacebar dbus[401]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.771872, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:20 spacebar smbd[428]: Ignoring unknown parameter "user client driver"
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.794252, 0] lib/interface.c:543(load_interfaces)
Oct 31 00:47:20 spacebar smbd[428]: WARNING: no network interfaces found
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.805126, 0] smbd/server.c:1109(main)
Oct 31 00:47:20 spacebar smbd[428]: standard input is not a socket, assuming -D option
Oh, this started happening after putting a MUCH faster cpu and motherboard in the system, so maybe there's a race-condition there?
Last edited by MisterAnderson (2012-10-30 04:59:46) -
Safari won't start properly - update related??
Suddenly , when I open Safari, it doesn't start properly - I just get the spinning wheel icon and I cannot browse websites. ( Luckily, I have Chrome which is working.
I don't know if it was related the recent Delta os update so I downloaded the 'Combo' update and applied it but still Safari won't work.
I don't fancy the re-installation of Lion just to get Safari working but if there's something less drastic, perhaps someone can suggest something.
Thx in advance.
-d-That's not good news. Creating a new user account should be a trivial exercise, unless there is something wrong with your system. The fact that Chrome is working doesn't reassure me... it could be a system problem that doesn't affect Chrome because it isn't deeply embedded into the system.
I suggest two steps:
1) Boot into your recovery partion by holding COMMAND-R when you reboot your computer. Then open disk utility and do a verify disk on your main partition.
If that is ok:
2) If you have a good quality internet connection, it could be worth downloading the 10.7.3 Install Mac OS X app from the Mac App Store and reinstalling (after making an appropriate backup of course). If all goes well, your data and user accounts will be preserved, but it will work better.
Cheers,
Rodney -
[Solved] QJackCtl won't start in with real time.
Hey all,
I'm having a problem with QJackCtl, I got my version from Extra. The problem is that for some reason Jack won't start in real time mode using QJackCtl. Real Time is checked and marked under the set-up tab, but that little piece of info doesn't seem to make it to jackd. If I start Jack through CLI it works with real time, but not from the GUI.
I figured this out by starting JACK from the command line and then starting QJack. When I would do that it would be running in real time just without the rest of my settings (buffer,periods,sampling rate, etc). So in my head there's an issue with QJackCtl. I've tried to find a solution, but I can't seem to find one. This isn't the first time I've set JACK up on a system, but this is the first time I've had this problem.
The rest of the system is set up and ready to go. Rt Kernel, limits.conf and all other tuning is done.
Is there something I missed when setting this piece of software up? Any ideas?
Solved Edit:
Okay, so right after I posted this I got a crazy idea. When you enter setup in qjackctl on the first page there's a box for server path. The path defaults to "jackd". On that line I added "--realtime", so it looked like a basic CLI start-up of JACK and now it works!
So, if anyone else has this problem go to the Setup tab, in the setup window on the line that says Server Path it should look like this:
jackd --realtime
It worked for me and I hope it helps somebody else out.
Last edited by Zen:Core (2010-04-03 21:41:52)Which volume? Assuming you're on the most common usecase (single hw audio device) then whatever command line you use (amixer for example) it'll work fine, it'll control the volume of the device rather than the pulseaudio plugin (so other playing apps get affected as well, which is probably what you want). The 'global' volume so to speak.
For multiple hw audio devices it gets tricky though. -
[SOLVED] - X won't start - Missing modules??
Hello all, thanks for looking.
I have installed from the Arch from the latest media, and followed the Begginers Guide.
I have installed to a partition on my hard disk, one of many, and installed Grub and the mbr.
The system boots fine. ALSA works, Xorg is installed, and pacman -Syu says "nothing to do"
It all seems fine except... X won't start.
I type startx and get the following errors in the /var/log/Xorg.0.log file :
[ 263.878]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 263.879] X Protocol Version 11, Revision 0
[ 263.879] Build Operating System: Linux 3.7.0-1-ARCH i686
[ 263.879] Current Operating System: Linux midnightsun 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012 i686
[ 263.879] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64b15d8f-85f1-412a-8fa9-fd054849176e ro quiet
[ 263.880] Build Date: 16 December 2012 04:52:09PM
[ 263.880]
[ 263.880] Current version of pixman: 0.28.2
[ 263.880] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 263.880] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 263.881] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 14 23:36:51 2013
[ 263.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 263.882] (==) No Layout section. Using the first Screen section.
[ 263.882] (==) No screen section available. Using defaults.
[ 263.882] (**) |-->Screen "Default Screen Section" (0)
[ 263.882] (**) | |-->Monitor "<default monitor>"
[ 263.882] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 263.882] (==) Automatically adding devices
[ 263.882] (==) Automatically enabling devices
[ 263.882] (==) Automatically adding GPU devices
[ 263.882] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 263.882] Entry deleted from font path.
[ 263.882] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 263.882] Entry deleted from font path.
[ 263.882] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 263.882] Entry deleted from font path.
[ 263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 263.882] Entry deleted from font path.
[ 263.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 263.882] Entry deleted from font path.
[ 263.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 263.882] (==) FontPath set to:
/usr/share/fonts/misc/
[ 263.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 263.882] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 263.882] (II) Loader magic: 0x825a640
[ 263.882] (II) Module ABI versions:
[ 263.882] X.Org ANSI C Emulation: 0.4
[ 263.882] X.Org Video Driver: 13.1
[ 263.882] X.Org XInput driver : 18.0
[ 263.882] X.Org Server Extension : 7.0
[ 263.883] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 263.884] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 263.884] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 263.885] Initializing built-in extension Generic Event Extension
[ 263.885] Initializing built-in extension SHAPE
[ 263.885] Initializing built-in extension MIT-SHM
[ 263.885] Initializing built-in extension XInputExtension
[ 263.886] Initializing built-in extension XTEST
[ 263.886] Initializing built-in extension BIG-REQUESTS
[ 263.886] Initializing built-in extension SYNC
[ 263.886] Initializing built-in extension XKEYBOARD
[ 263.887] Initializing built-in extension XC-MISC
[ 263.887] Initializing built-in extension SECURITY
[ 263.887] Initializing built-in extension XINERAMA
[ 263.887] Initializing built-in extension XFIXES
[ 263.887] Initializing built-in extension RENDER
[ 263.888] Initializing built-in extension RANDR
[ 263.888] Initializing built-in extension COMPOSITE
[ 263.888] Initializing built-in extension DAMAGE
[ 263.888] Initializing built-in extension MIT-SCREEN-SAVER
[ 263.888] Initializing built-in extension DOUBLE-BUFFER
[ 263.889] Initializing built-in extension RECORD
[ 263.889] Initializing built-in extension DPMS
[ 263.889] Initializing built-in extension X-Resource
[ 263.889] Initializing built-in extension XVideo
[ 263.889] Initializing built-in extension XVideo-MotionCompensation
[ 263.889] Initializing built-in extension XFree86-VidModeExtension
[ 263.890] Initializing built-in extension XFree86-DGA
[ 263.890] Initializing built-in extension XFree86-DRI
[ 263.890] Initializing built-in extension DRI2
[ 263.890] (II) LoadModule: "glx"
[ 263.890] (WW) Warning, couldn't open module glx
[ 263.890] (II) UnloadModule: "glx"
[ 263.890] (II) Unloading glx
[ 263.890] (EE) Failed to load module "glx" (module does not exist, 0)
[ 263.890] (==) Matched nouveau as autoconfigured driver 0
[ 263.890] (==) Matched nvidia as autoconfigured driver 1
[ 263.890] (==) Matched nv as autoconfigured driver 2
[ 263.890] (==) Matched nouveau as autoconfigured driver 3
[ 263.890] (==) Matched nvidia as autoconfigured driver 4
[ 263.890] (==) Matched nv as autoconfigured driver 5
[ 263.890] (==) Matched vesa as autoconfigured driver 6
[ 263.890] (==) Matched modesetting as autoconfigured driver 7
[ 263.890] (==) Matched fbdev as autoconfigured driver 8
[ 263.890] (==) Assigned the driver to the xf86ConfigLayout
[ 263.890] (II) LoadModule: "nouveau"
[ 263.891] (WW) Warning, couldn't open module nouveau
[ 263.891] (II) UnloadModule: "nouveau"
[ 263.891] (II) Unloading nouveau
[ 263.891] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 263.891] (II) LoadModule: "nvidia"
[ 263.891] (WW) Warning, couldn't open module nvidia
[ 263.891] (II) UnloadModule: "nvidia"
[ 263.891] (II) Unloading nvidia
[ 263.891] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 263.891] (II) LoadModule: "nv"
[ 263.891] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 263.891] (II) Module nv: vendor="X.Org Foundation"
[ 263.891] compiled for 1.13.0, module version = 2.1.20
[ 263.891] Module class: X.Org Video Driver
[ 263.891] ABI class: X.Org Video Driver, version 13.0
[ 263.891] (II) LoadModule: "vesa"
[ 263.891] (WW) Warning, couldn't open module vesa
[ 263.891] (II) UnloadModule: "vesa"
[ 263.891] (II) Unloading vesa
[ 263.891] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 263.891] (II) LoadModule: "modesetting"
[ 263.892] (WW) Warning, couldn't open module modesetting
[ 263.892] (II) UnloadModule: "modesetting"
[ 263.892] (II) Unloading modesetting
[ 263.892] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 263.892] (II) LoadModule: "fbdev"
[ 263.892] (WW) Warning, couldn't open module fbdev
[ 263.892] (II) UnloadModule: "fbdev"
[ 263.892] (II) Unloading fbdev
[ 263.892] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 263.892] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 263.895] (++) using VT number 1
[ 263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
[ 263.895] (EE) NV: This driver cannot operate until it has been unloaded.
[ 263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
[ 263.895] (EE) NV: This driver cannot operate until it has been unloaded.
[ 263.895] (EE) No devices detected.
[ 263.895]
Fatal server error:
[ 263.895] no screens found
[ 263.895] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 263.895] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 263.896] (EE)
It appears that some modules are missing, and indeed none of those mentioned in the errors are there if I do lsmod.
But that is about the limit of my understanding.
Can anyone tell me how to add the modules if they aren't even on the machine at all.
Pacman doesn't find them. For example pacman -S glx gives package not found.
Any ideas or pointers much appreciated.
Last edited by Midnight Sun (2013-01-16 00:01:35)I Can't Believe It
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
I swear I checked that 6 hours ago when I first tried startx.
OH
MY
GOD
Just give me a moment to calm down..........
OK. Thank you. You are completely and joyously right.
It would seem that I had neglected to install the video driver.
Thanks for that. -
Hi all, before I explain my problem, I have spent the last 6 hours searching google and these forums for the answer, so I apologize if I have missed the solution somewhere.
Its 1:38pm here in Australia, and since I woke up today I have been trying to install the drivers for my amd 6950 2gb card.
I "finished" my first ever arch linux install last night, and installed the catalyst and catalyst-utils packages from the unnofficial repositories as I thought they were the newest. They seem to have worked, I am now in xfce4 wm(not as my environment), and everything is working great. However, because my monitor uses hdmi, whenever I do a fresh install of drivers the screen is scaled down by 15%, as this is for some reason a default in the driver. I usually just start amdcccle as root and fix it, but amdcccle won't start.
tl;dr, amdccle won't start either through terminal or started through xfce app menu. Do I need to reinstall all my drivers or just install the amdccle package. sudo pacman -S amdcccle says "cannot find package".
I am loving the speed of arch linux so far, not having 100+ apps that I don't use is nice.
EDIT: sorry, forgot the error:
amdcccle: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory
Edit2: Wow, I am tired. I just realized I hadn't installed Qt.
If an admin/mod wants to delete this thread then go for it, otherwise Ill i leave the solution to the problem here for other new users like myself.
To fix just run
pacman -S qt
Last edited by jc-kakashi (2012-03-10 00:55:23)I followed wiki for uninstall catalyst, reboot, then clean install of catalyst, reboot, it's the same.
But I've found a way to make it work : disable lxdm and reboot.
Then I remove /etc/ati/amdpcsdb at each boot, before running startx. Then I'm able to open amdcccle, check configuration, fglrxinfo gives :
[jledun@io0 ~]$ fglrxinfo
display: :0 screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 8650G
OpenGL version string: 4.3.12614 Compatibility Profile Context 13.25.18
If I reboot again, the problem appears again, then I kill X, remove /etc/ati/amdpcsdb again and it works.
I'm going to see if the problem is the same with razor-qt.
Maybe you are looking for
-
What's 'BOM Group' ? How to use it?
What's 'BOM Group' ? How to use it? How can i find the reference help file? Please give me the solution as detail as possable.
-
Just thought I'd ask in case others are having same problems or if solutions are available
-
Password Self-Service for AE 2.1
Does anyone know how to setup employee self services for password resets in Access Enforcer 2.1? I know how to navigate to that selection, but I am not sure what value to add in the required fields? Anyone have any ideas? I had a document from SAP an
-
Can someone point me in the direction of a simple photo slideshow tutorial or a download? To be embedded into a web page. Thanks Tim
-
Cross Connection Detected - Pipex DSL
I've recently had the mis-pleasure of having to re-install and archive my iMac G5 back to OSX 10.3.5 (was running on 10.3.9), as I was getting a blank grey screen on start-up, which I'm still at a loss as to why my iMac suddenly stopped working after