[solved] googleearth-bin and libm.so.6
I'm getting this error when trying to run Google Earth. It's the bin32-google-earth package in the AUR.
./googleearth-bin: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS64
What can I do to make it work?
Last edited by synthead (2008-04-26 23:28:01)
I figured it out, sorry
I had to reinstall lib32-glibc.
Similar Messages
-
"$RECYCLE.BIN" and "System Volume Information" on a hard drive connected to EA4500
Hello
I've bought WD Elements 3 TB USB 2.0 External HD WDBAAU0030HBK hard drive for my Linksys EA4500. The hard drive was NTFS formatted. After I plugged it in I see "$RECYCLE.BIN" and "System Volume Information" folders on it via my Windows Explorer. I know these folders to be Windows system folders, but my hard drive is now connected to router. So do I really need them, or can I safely remove them?
Solved!
Go to Solution.The EA4500 does not have to anything with these folders popping-up since they appear on the computer by its design- system file and cannot be deleted permanently. I had read some notes on how to hide these files; you can try these if you want:
It works as a part of recycle bin in your desktop. To make this disappear, go to Tools > Folder Options > View and uncheck “Hide protected operating system files”. System Volume Information is where windows system restore files are located. If you do not want to use this folder then disable System Restore.
But just to be safe, leave it as is. This should not make any issues or problems in accessing the files from the HD using the computers connected to the EA4500. -
I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?
Hi Susan,
Please refer to the help document to fix this issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
You may also refer to the thread as below:
creative cloud software says my free trial has expired, but I have a paid subscription
Regards,
Sheena -
I just accidentally wiped out my entire music library. I sent everything to recycling bin and then immediately hit restore all items as I knew what I had just done. Now I can find where those files went. Is there anyway Apple can just send me my purchased songs again?
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519 -
Problem with solver DLL load and Excel 2010
Since upgrading from Office 2007 to Office 2010 we've started to experience a problem with the solver addin when our own analytics addins is also loaded. I have found a solution, but I think it may highlight a problem with the latest version of the solver
addin for Excel 2010.
Firstly, to describe the problem - the solver addin seems to load normally when Excel 2010 starts up, however when a "Solve" is performed we are seeing a "File not found: Solver32.dll" error at the final "Keep Solver Solution" stage. This only happens our
own analytics addin is loaded. We've been careful to make sure that our own addin does not change the working directory and also that it has been built against the correct Excel 2010 SDK libraries. We do not see this error with any other versions of Excel
running on the same PC or any other environment.
After some searching we found other people were having similar problems and after a bit more probing I found a solution that works - but that I'm not very happy with.
If I copy the Solver32.dll from:
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER
(where it was installed)
into :
C:\Windows\SysWOW64
(where Windows 7 keeps its 32 bit system DLLs)
then the problem goes away.
This seems to indicate that somehow Office 2010 has a problem that causes it to search in the wrong folder for the Solver32.dll when another addin is loaded in between the original Solver32.XLAM at start up and the use of the Solver in the sheet (which eventually
requires this DLL to be loaded). Oddly, this only happens after a solution is found and "Keep Solver Solution" is selected - and I'm not sure why it's not looking for Solver32.dll any earlier.
This is not a problem with any earlier versions of Excel and I suspect is a bug in the Office14/LIBRARY/SOLVER implementation. Is there any way to get this followed up?
Thanks,
AndyI'm facing the same issue. With an Excel VSTO add-in we're building. When the add-in is enabled the assembly solver32.dll can't be found. With our add-in disabled the DLL is resolved as (Sysinternals Process Monitor trace):
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\SysWOW64\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\system\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\Solver32.dll
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER\SOLVER32.DLL
and with our add-in enabled the following locations are tried, but solver32.dll won't be found:
excel.exe CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
excel.exe CreateFile
C:\ArcGIS\______path to our add-in install location_____________\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\system\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Program Files\Common Files\Microsoft Shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Program Files (x86)\Common Files\microsoft shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\wbem\Solver32.dll
etc... -
I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
Why do my imported files or created titles always go to some random bin and not the one I want?
Everytime I import a file via right clicking > Import. It will always go to some random bin that I don't want it to. Each project it's a different bin. Even if I right click > import on the bin I want it to import into, the file will still go to some pre determined default folder. Usually one of my Footage folders a couple of layers down.
This same thing happens when created titles. I usually have to do a search to find the files. When I used CS2 and 3 I never had this problem.
Anyone else experiencing this? Is there a way to not have it go to a pre determined default bin? Or can I change that Bin?
Currently the only way I can get a file to go into the folder I want via importing is when I drag and drop it from my explorer window. I don't use the CS5 media browser because It doesn't have thumbnails.
Thoughts, solutions?
Thanks in advance.
-SwitchClose.
With this specific bin structure, if I import as you described the file imports to the Reception Bin. I tried the same proceedure with highlighting>righ clicking> and importing, files to all bin levels even to the root level not inside a bin and it still goes to the reception bin. So for what ever reason for this project I am working on now the Reception Bin has become the default bin.
This holds true for titles as well, they get created in the reception bin.
I thought it might have something to do with the fact that I presort my footage into folders then "import folder" into the footage bin. I thought it might have something to do with the last bin I created or imported became a default bin but in this scenario. The Receception bin is the second to last folder I imported/created. -
I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the same
kindly reply and fix this for me
reply to my email,tqMost likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
[SOLVED] Arch64, Opera and plugins library problem
I have Arch64 with Opera 64-bit as default browser. I have succesfully installed 32-bit flashplugin and it works nicely. The only problem is that fonts cannot be read from the flash player context menu and Open File dialog opened from flash player. The problem is that flashplugin tries to load 64-bit GTK from /usr/lib/gtk-2.0/2.10.0/ and it fails. 32-bit version is installed and it's located in /opt/lib32/usr/lib/gtk-2.0/2.10.0/.
Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so: wrong ELF class: ELFCLASS64
Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libpixmap.so: wrong ELF class: ELFCLASS64
Also I have library loading problem with totem-plugin. It cannot find libxul.so and libxpcom.so, but both library files are located in /usr/lib/xulrunner-1.9.0.1/. The plugin loads fine if I create links to both files in /usr/lib/. But that doesn't seem like right solution to me.
$ ldd libtotem-mully-plugin.so
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f94e19d9000)
libtotem-plparser-mini.so.10 => /usr/lib/libtotem-plparser-mini.so.10 (0x00007f94e17d6000)
libxul.so => not found
libxpcom.so => not found
libplds4.so => /usr/lib/libplds4.so (0x00007f94e15d2000)
What would be a most elegant way of solving these two library loading problems?
I think that symbolic links and moving files are not the most elegant way to solve the problem. Maybe some environment variable or some configuration setting would solve the problem (LDPATH comes to mind, but it seems that it doesn't work).
EDIT: I wasn't sure in which section to post this question, so feel free to move it if necessary.
Last edited by SnapShot (2008-09-12 02:50:01)I have solved my problem and I will post my solution because it can be usefull to others.
First the problem with flashplugin and GTK library path. Opera uses operapluginwrapper scirpt to detect if the plugin is 32-bit or 64-bit and after detection it uses operapluiginwrapper-ia32-linux for 32-bit or operapluginwrapper-native for 64-bit plugins. operapluiginwrapper-ia32-linux loads the 32-bit flashplugin in my case which requires GTK, but it incorectly tries to load it form /usr/lib/gtk-2.0/ where 64-bit version of GTK resides.
The solution is to set the GTK_PATH environment variable to point to /opt/lib32/usr/lib/gtk-2.0/ where 32-bit version resides. But if you set it globaly it will result in problems with other 64-bit applications. So the correct solution is to add following lines on the bottom of the operapluginwrapper script above the exec line:
case "$wrapper" in
*ia32*)
export GTK_PATH="/opt/lib32/usr/lib/gtk-2.0"
export PANGO_RC_FILE="/opt/lib32/config/pango/pangorc"
esac
In this way the 32-bit paths will be active only for operapluginwrapper-ia32-linux process.
I have solved the other problem with totem-plugin requesting libxul.so and libxpcom.so, but the solution idoesn't matter because, although totem-plugin loads coreclty it doesn't work in opera. I have installed mplayer-plugin which works as it should. Also gecko-mediaplayer works correctly with opera, I have tested them both. Install one of the two plugins that work, and you will be fine. -
COMPONENT BIN AND INSTRUMENTS NOT AVAILABLE
For some reason, (Multisim 2001) the component bin and instruments are greyed out. I can no longer build circuits.
I can load my existing circuits and run the simulator but I can't load an instrument or add new parts..
Could I have inadvertently disabled them some how? I checked all my preference settings and as I see it, they
should be available.
Any idea would be appreciated.
DonD-1Try going to the Options menu, then select Global Restrictions (or Circuit Restrictions? -try both)... if you see a prompt for a password the default is "testbench" and I guess that your options are all going to be disabled... re-enable them.
If that does not works then go to your installation directory path, and from the Users folder delete your configuration file (make a backup copy first -just in case)... restart Multisim it will recreate that file.
Nestor
National Instruments -
/usr/local/bin vs /usr/bin and Kazehakase vs Firefox
When you install an application to /usr/bin will it be more faster than installed on /usr/local/bin?
I have Firefox installed in /usr/bin and Kazehakase installed to /usr/local/bin. And it seems that Firefox is faster than Kazehakase. Why?
Last edited by Paingiver (2008-03-15 11:11:48)dyscoria wrote:
Endperform wrote:The notion that an application can be sped up by linking it in your home directory, or even renaming it to one letter is also crazy. Your install will search for an executable in the path specified in $PATH and then execute the first instance it finds, but this does NOT speed the application itself up.
No seriously, if you rename all your executables to one letter then your system runs like lightning!
* am i really that bad at sarcasm? *
Yes, since there was no indication of sarcasm in your post. A or would have worked -
I deleted some apps on accident. I went to my recycling bin and saw them in there. I tried to restore them thinking that they would just reappear on itunes, but they didn't. Is there a way i can get them back or did i completely lose them?
Which idiot at apple decided this was intuitive?
I too have lost months of work, because when Notes started to mysteriously appear in Mail, I deleted them (That makes sense doesn't it? - Its not MAIL) Why would any one then setup the best OS in the world to delete the actual notes (from within Mail) in the application you created them in???? with no warning and no backup. Months of work, instantly destroyed. This is why i pay the Apple prices!!
If Jobs was still around, heads would roll. -
I''m trying to remove babylon toolbar and have gone to programs/add/remove. uninstalled and deleted the trash bin and still have the toolbar. HELP
You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651 -
It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
I just transferred a project from fcp6 to fcpX using 7toX.
In fcpX, I can see all of my sequences in the browser, but not any of my bins or clips. I'm new to fcpX, is there some sneaky way to find my clips in the browser?
I'm pretty sure I did the transfer correctly. The XML dialogue indicated that it was transfering 100s of bins and 1000s of clips. Also in the fcpX Library Properties it indicates there is 3.3TB of media included in the Library. So then, where is it?
Thanks,
MatthewThere were a few random clips that made it into an "other" folder. but nothing else. All of my sequences are in the "sequences" folder.
Also, in the Original Media folder (in Finder), it looks like I have alias' for all of the footage in the project. So the XML did something. I just can't find it in FCPX
Maybe you are looking for
-
Where can I find a horizontal accordion menu tutorial
I have googled all day looking for a horizontal accordion menu for javascript and haven't found an actual tutorial. I have found downloads, but I want learn how to make one.
-
I am trying to add an updated version of a PDF eBook to iBooks but I'm told it already exists.
Hi There, I'm using iBooks on Mavericks, primarily prior to syncing books to my iPad. I often upload both the ePub and PDF versions, as a lot are technical books, with diagrams in them. Anyway, I received the final versions of a recently released boo
-
Why's is my iPhone having problems in cold weather? It just turns Off
-
How can projects and folders in iPhoto be imported into Photoshop Elements 11?
How can projects and folders in iPhoto be imported into Photoshop Elements 11?
-
Response commited , but no IllegalStateException
res.setContentType( "text/html" ); PrintWriter writer = res.getWriter(); writer.println("Hello World!!!"); //writer.flush(); writer.println("After flusing"); writer.println("Before flushBuffer...");