[Solved] HDMI audio broken after upgrading to kernel 3.13.4

Hi,
Yesterday I upgraded to kernel 3.13.4 from 3.12.9 and
HDMI audio through my nVidia GTX660 card stopped working.
The problem occurs both with nouveau and nVidia drivers.
My system is an aged Intel quadcore Q9400 on a Intel motherboard.
By typing "aplay -l" I get:
card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
Strangely the alsa card number changed from 1 to 2
after the kernel upgrade.
I would really appreciate any help.
Thanks
Last edited by tenoriocalc (2014-02-23 16:02:46)

Thank you very much, silenceleaf.
I managed to make it work with some tweaking like you said.
But only after a deep power cycle, unpluging any power to the system.
Just turning off the machine's power button was not enough. Odd!
Last edited by tenoriocalc (2014-02-23 16:09:44)

Similar Messages

  • [SOLVED] odd audio problem after upgrade w/ VIA VT82xx

    Everything was working splendidly until I did pacman -Syu the other day.
    Now, sound plays VERY faintly (so much so that you can barely hear it on full volume), and there's audible (but faint) static in the background.  It's ALL sound -- doesn't matter what program I use or whether it goes through ALSA, OSS, or Pulse.  The weird part is that the static gets stronger when my machine does work: if I shut down, for example, the static seems to go along with the disk write noise.  Also, you'd think it'd either work or not work instead of halfway working.
    Volumes are all set properly.  I ran alsaconf to no avail.  I get no errors in dmesg, or when I run a program to play audio.
    I'm assuming the culprit is the 2.6.30 kernel upgrade, but I'm not entirely sure, as like I said, I upgraded all packages.
    Here's some relevant info:
    $ uname -a
    Linux myhost 2.6.30-ARCH #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009 i686 AMD Athlon(TM) XP 2500+ AuthenticAMD GNU/Linux
    $ lspci | grep audio
    00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    $ lsmod | grep snd
    snd_seq_dummy 2696 0
    snd_seq_oss 31168 0
    snd_seq_midi_event 7012 1 snd_seq_oss
    snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_via82xx_modem 11820 0
    snd_via82xx 24060 3
    snd_mpu401_uart 7524 1 snd_via82xx
    snd_ac97_codec 106088 2 snd_via82xx_modem,snd_via82xx
    snd_pcm_oss 40352 0
    snd_mixer_oss 17540 1 snd_pcm_oss
    ac97_bus 1540 1 snd_ac97_codec
    snd_rawmidi 21824 1 snd_mpu401_uart
    snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
    snd_pcm 73768 5 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss
    snd_timer 21068 2 snd_seq,snd_pcm
    snd 58404 17 snd_seq_oss,snd_seq,snd_via82xx_modem,snd_via82xx,snd_mpu401_uart,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
    snd_page_alloc 8844 3 snd_via82xx_modem,snd_via82xx,snd_pcm
    soundcore 6784 1 snd
    gameport 11280 4 snd_via82xx,analog,ns558
    $ dmesg | grep VIA
    VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
    Any ideas?  I'm stumped, and I miss my audio!
    Last edited by toxite (2009-07-01 02:11:48)

    Sound is back... Thanks!
    Now that it is working.. what is DXS? I cannot find anything useful about it, yet.
    EDIT: found it
    linux-2.6.git / Documentation / sound / alsa / ALSA-Configuration.txt
    1787        dxs_support    - support DXS channels,
    1788              0 = auto (default), 1 = enable, 2 = disable,
    1789              3 = 48k only, 4 = no VRA, 5 = enable any sample
    1790              rate and different sample rates on different
    1791              channels
    1792              [VIA8233/C, 8235, 8237 only]
    1804        Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
    1805          channels as the first PCM.  On these channels, up to 4
    1806          streams can be played at the same time, and the controller
    1807          can perform sample rate conversion with separate rates for
    1808          each channel.
    Last edited by diegonc (2009-07-01 04:13:38)

  • [SOLVED] Another "Sound broken after upgrade" thread

    Hi.  My sound stopped working at some point, probably after an upgrade.  I've seen lot's of posts about this in the last month, but nothing is helping.  My guess is that OSS is screwing with ALSA.  Here is what it says in my pacman log.
    Running OSS update script...
    [2011-12-05 13:34]
    [2011-12-05 13:34] -------------------------------------------------------------
    [2011-12-05 13:34] Open Sound System was updated. Now you should restart the
    [2011-12-05 13:34] daemon by running /etc/rc.d/oss restart.
    [2011-12-05 13:34]
    [2011-12-05 13:34] Please note that OSS stores some of its configuration files
    [2011-12-05 13:34] at /usr/lib/oss. If you are upgrading from an older OSS
    [2011-12-05 13:34] release and it doesn't work properly, try removing that
    [2011-12-05 13:34] directory and reinstall this package.
    [2011-12-05 13:34] -------------------------------------------------------------
    [2011-12-05 13:34] upgraded oss (4.2_2005-1 -> 4.2_2005-2)
    I tried removing the directory and reinstalling oss, but that didn't work.  I also tried removing oss altogether, but pacman says that lib32-libflashsupport: requires oss.  So I'm not sure what to do.  I was trying this
    http://wiki.archbang.org/index.php?titl … _with_Alsa
    but I got the dependency conflict with libflashsupport.
    What I want to do is force remove oss via pacman -Rf oss, then install the alsa-oss emulator, but I'm not sure if that will break something else.
    I'm also willing to just wait and see if the next kernel update will fix it, if that doesn't take too long.  I don't really use sound very often anyway, but I still want it to work.  I'm running this kernel
    Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
    Thanks for any help.
    Last edited by Pacopag (2012-01-09 14:57:18)

    Sorry for bumping this rather useless post.  But I just wanted to mention that the problem is fixed.  What I did was to follow the link
    http://wiki.archbang.org/index.php?titl … _with_Alsa
    (but I don't know that even has anything to do with the solution, because the sound didn't work after doing this.)
    But then, just today, there was a kernel upgrade, and now the sound works.  Big thanks to the arch team.
    Last edited by Pacopag (2012-01-09 14:56:41)

  • Tvtime not working after upgrading to kernel-2.6.31-1 (Solved)

    Hello friends,
    When I am using kernel-2.6.30.8 it was everything ok with my system. tvtime has been working with least cpu utilization then. But after upgrading to kernel-2.6.31-1 I got following error messages when trying to open tvtime
    damu@station210 ~]$ tvtime
    Running tvtime 1.0.2.
    Reading configuration from /etc/tvtime/tvtime.xml
    Reading configuration from /home/damu/.tvtime/tvtime.xml
    xvoutput: No XVIDEO port found which supports YUY2 images.
    *** tvtime requires hardware YUY2 overlay support from your video card
    *** driver. If you are using an older NVIDIA card (TNT2), then
    *** this capability is only available with their binary drivers.
    *** For some ATI cards, this feature may be found in the experimental
    *** GATOS drivers: http://gatos.souceforge.net/
    *** If unsure, please check with your distribution to see if your
    *** X driver supports hardware overlay surfaces.
    What happened to driver and kernel? any way to go back to previous kernel version?
    Requesting help! Thanks
    Last edited by mvdvarrier (2009-10-14 06:26:14)

    Perry3D wrote:
    Are you using the xf86-video-ati/radeonhd driver?
    Try disabling KMS by appending nomodeset to the kernel parameters. At the moment kms ist not usable without upgrading some libs (mesa?, libdrm?). Search the forums for kms to get more information.
    Thanks Perry3D
    I disabled KMS as per http://wiki.archlinux.org/index.php/ATI. Now tvtime is working great. With the release of kernel 2.6.32 KMS can be enabled for ati card with radeon3200 chips
    mvdvarrier

  • My Arch is very slow after upgrading to kernel 3.0

    Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)...  I would like you to help me to solve a problem: as i wrote in object  my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

    However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
    EDIT: I've checked but no error is shown....this is dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
    [ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 118000000 mask FF8000000 uncachable
    [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
    [ 0.000000] 0000000000 - 00dee00000 page 2M
    [ 0.000000] 00dee00000 - 00dee74000 page 4k
    [ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
    [ 0.000000] 0100000000 - 0118000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
    [ 0.000000] RAMDISK: 37c76000 - 37e33000
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
    [ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000def2df40 00040
    [ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
    [ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
    [ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000118000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
    [ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00118000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000dee74
    [ 0.000000] 0: 0x00100000 -> 0x00118000
    [ 0.000000] On node 0 totalpages: 1011202
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1344 pages used for memmap
    [ 0.000000] Normal zone: 96960 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
    [ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
    [ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
    [ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
    [ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
    [ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
    [ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
    [ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
    [ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
    [ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
    [ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
    [ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
    [ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
    [ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] spurious 8259A interrupt: IRQ7.
    [ 0.003333] Detected 2127.784 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000120] Security Framework initialized
    [ 0.000125] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001968] Mount-cache hash table entries: 256
    [ 0.002354] Initializing cgroup subsys cpuacct
    [ 0.002387] Initializing cgroup subsys memory
    [ 0.002403] Initializing cgroup subsys devices
    [ 0.002406] Initializing cgroup subsys freezer
    [ 0.002408] Initializing cgroup subsys net_cls
    [ 0.002410] Initializing cgroup subsys blkio
    [ 0.002461] CPU: Physical Processor ID: 0
    [ 0.002462] CPU: Processor Core ID: 0
    [ 0.002468] mce: CPU supports 9 MCE banks
    [ 0.002478] CPU0: Thermal monitoring handled by SMI
    [ 0.002487] using mwait in idle threads.
    [ 0.003640] ACPI: Core revision 20110413
    [ 0.019108] ftrace: allocating 16144 entries in 64 pages
    [ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
    [ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.163161] ... version: 3
    [ 0.163162] ... bit width: 48
    [ 0.163164] ... generic registers: 4
    [ 0.163165] ... value mask: 0000ffffffffffff
    [ 0.163167] ... max period: 000000007fffffff
    [ 0.163168] ... fixed-purpose events: 3
    [ 0.163169] ... event mask: 000000070000000f
    [ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.209823] Booting Node 0, Processors #1
    [ 0.209829] smpboot cpu 1: start_ip = 99000
    [ 0.303122] CPU1: Thermal monitoring handled by SMI
    [ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.343129] #2
    [ 0.343133] smpboot cpu 2: start_ip = 99000
    [ 0.436405] CPU2: Thermal monitoring handled by SMI
    [ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.476405] #3
    [ 0.476409] smpboot cpu 3: start_ip = 99000
    [ 0.569682] CPU3: Thermal monitoring handled by SMI
    [ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.596326] Brought up 4 CPUs
    [ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
    [ 0.598893] devtmpfs: initialized
    [ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
    [ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
    [ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
    [ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
    [ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
    [ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
    [ 0.600970] print_constraints: dummy:
    [ 0.601050] NET: Registered protocol family 16
    [ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.601159] ACPI: bus type pci registered
    [ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.613921] PCI: Using configuration type 1 for base access
    [ 0.614412] bio: create slab <bio-0> at 0
    [ 0.616187] ACPI: EC: Look up EC in DSDT
    [ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647118] ACPI: Dynamic OEM Table Load:
    [ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.647646] ACPI: Dynamic OEM Table Load:
    [ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.667016] ACPI: Dynamic OEM Table Load:
    [ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.676844] ACPI: Dynamic OEM Table Load:
    [ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 1.089727] ACPI: Interpreter enabled
    [ 1.089731] ACPI: (supports S0 S3 S4 S5)
    [ 1.089754] ACPI: Using IOAPIC for interrupt routing
    [ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.120814] ACPI: No dock devices found.
    [ 1.120815] HEST: Table not found.
    [ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.121147] \_SB_.PCI0:_OSC invalid UUID
    [ 1.121149] _OSC request data:1 8 1f
    [ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
    [ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.121761] pci 0000:00:01.0: PME# disabled
    [ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
    [ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.121927] pci 0000:00:16.0: PME# disabled
    [ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
    [ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.122088] pci 0000:00:1a.0: PME# disabled
    [ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
    [ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.122223] pci 0000:00:1b.0: PME# disabled
    [ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.122337] pci 0000:00:1c.0: PME# disabled
    [ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.122451] pci 0000:00:1c.1: PME# disabled
    [ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
    [ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.122565] pci 0000:00:1c.2: PME# disabled
    [ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
    [ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.122686] pci 0000:00:1c.5: PME# disabled
    [ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
    [ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.122844] pci 0000:00:1d.0: PME# disabled
    [ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
    [ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
    [ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
    [ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
    [ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
    [ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
    [ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    [ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
    [ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.123214] pci 0000:00:1f.2: PME# disabled
    [ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
    [ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
    [ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    [ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
    [ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
    [ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
    [ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
    [ 1.123443] pci 0000:01:00.0: supports D1 D2
    [ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
    [ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
    [ 1.123555] pci 0000:01:00.1: supports D1 D2
    [ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
    [ 1.123783] pci 0000:02:00.0: supports D1
    [ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.123790] pci 0000:02:00.0: PME# disabled
    [ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
    [ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
    [ 1.124115] pci 0000:03:00.0: supports D1 D2
    [ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124123] pci 0000:03:00.0: PME# disabled
    [ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
    [ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
    [ 1.124336] pci 0000:03:00.1: supports D1 D2
    [ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124344] pci 0000:03:00.1: PME# disabled
    [ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
    [ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
    [ 1.124554] pci 0000:03:00.4: supports D1 D2
    [ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124562] pci 0000:03:00.4: PME# disabled
    [ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
    [ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
    [ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
    [ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
    [ 1.125967] pci 0000:04:00.0: supports D1 D2
    [ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.126008] pci 0000:04:00.0: PME# disabled
    [ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    [ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
    [ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.126997] \_SB_.PCI0:_OSC invalid UUID
    [ 1.126998] _OSC request data:1 1f 1f
    [ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.127035] \_SB_.PCI0:_OSC invalid UUID
    [ 1.127037] _OSC request data:1 0 1d
    [ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
    [ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
    [ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
    [ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.131826] vgaarb: loaded
    [ 1.131827] vgaarb: bridge control possible 0000:01:00.0
    [ 1.131900] PCI: Using ACPI for IRQ routing
    [ 1.134142] PCI: pci_cache_line_size set to 64 bytes
    [ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
    [ 1.134372] NetLabel: Initializing
    [ 1.134374] NetLabel: domain hash size = 128
    [ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.134389] NetLabel: unlabeled traffic allowed by default
    [ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.136441] Switching to clocksource hpet
    [ 1.139456] Switched to NOHz mode on CPU #0
    [ 1.139583] Switched to NOHz mode on CPU #1
    [ 1.139590] Switched to NOHz mode on CPU #2
    [ 1.139598] Switched to NOHz mode on CPU #3
    [ 1.142357] pnp: PnP ACPI init
    [ 1.142375] ACPI: bus type pnp registered
    [ 1.142679] pnp 00:00: [bus 00-3e]
    [ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
    [ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.142841] pnp 00:01: [io 0x0000-0x001f]
    [ 1.142843] pnp 00:01: [io 0x0081-0x0091]
    [ 1.142844] pnp 00:01: [io 0x0093-0x009f]
    [ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.142848] pnp 00:01: [dma 4]
    [ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.143008] pnp 00:04: [io 0x00f0]
    [ 1.143019] pnp 00:04: [irq 13]
    [ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.143054] pnp 00:05: [io 0x002e-0x002f]
    [ 1.143056] pnp 00:05: [io 0x004e-0x004f]
    [ 1.143057] pnp 00:05: [io 0x0061]
    [ 1.143059] pnp 00:05: [io 0x0063]
    [ 1.143061] pnp 00:05: [io 0x0065]
    [ 1.143062] pnp 00:05: [io 0x0067]
    [ 1.143064] pnp 00:05: [io 0x0070]
    [ 1.143065] pnp 00:05: [io 0x0080]
    [ 1.143066] pnp 00:05: [io 0x0092]
    [ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.143070] pnp 00:05: [io 0x0680-0x069f]
    [ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
    [ 1.143073] pnp 00:05: [io 0xff10-0xff13]
    [ 1.143075] pnp 00:05: [io 0x0800-0x0803]
    [ 1.143076] pnp 00:05: [io 0x0400-0x047f]
    [ 1.143078] pnp 00:05: [io 0x0500-0x057f]
    [ 1.143080] pnp 00:05: [io 0x164e-0x164f]
    [ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
    [ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
    [ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
    [ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143166] pnp 00:06: [io 0x0070-0x0077]
    [ 1.143171] pnp 00:06: [irq 8]
    [ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.143218] pnp 00:07: [io 0x0060]
    [ 1.143220] pnp 00:07: [io 0x0064]
    [ 1.143225] pnp 00:07: [irq 1]
    [ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.143262] pnp 00:08: [irq 12]
    [ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
    [ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
    [ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
    [ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
    [ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
    [ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
    [ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
    [ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
    [ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143900] pnp 00:0a: [bus 3f]
    [ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.157077] pnp: PnP ACPI: found 11 devices
    [ 1.157079] ACPI: ACPI bus type pnp unregistered
    [ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
    [ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    [ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
    [ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163296] pci 0000:00:01.0: setting latency timer to 64
    [ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
    [ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
    [ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
    [ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
    [ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
    [ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
    [ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    [ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    [ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163511] NET: Registered protocol family 2
    [ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.168016] TCP reno registered
    [ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168344] NET: Registered protocol family 1
    [ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832352] pci 0000:01:00.0: Boot video device
    [ 3.832384] PCI: CLS 64 bytes, default 64
    [ 3.832433] Unpacking initramfs...
    [ 3.861003] Freeing initrd memory: 1780k freed
    [ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
    [ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
    [ 3.861787] audit: initializing netlink socket (disabled)
    [ 3.861799] type=2000 audit(1313594250.696:1): initialized
    [ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 3.886559] VFS: Disk quotas dquot_6.5.2
    [ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 3.886869] msgmni has been set to 7638
    [ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 3.887147] io scheduler noop registered
    [ 3.887150] io scheduler deadline registered
    [ 3.887202] io scheduler cfq registered (default)
    [ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
    [ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
    [ 3.887674] vesafb: scrolling: redraw
    [ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
    [ 4.087472] Console: switching to colour frame buffer device 200x56
    [ 4.281840] fb0: VESA VGA frame buffer device
    [ 4.281854] intel_idle: MWAIT substates: 0x1120
    [ 4.281856] intel_idle: v0.4 model 0x25
    [ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 4.281902] ERST: Table is not found!
    [ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.469026] Linux agpgart interface v0.103
    [ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 4.473591] mousedev: PS/2 mouse device common for all mice
    [ 4.473653] rtc_cmos 00:06: RTC can wake from S4
    [ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 4.473886] cpuidle: using governor ladder
    [ 4.474031] cpuidle: using governor menu
    [ 4.474245] TCP cubic registered
    [ 4.474248] NET: Registered protocol family 17
    [ 4.474257] Registering the dns_resolver key type
    [ 4.474353] PM: Checking hibernation image partition /dev/sda9
    [ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.502184] PM: Hibernation image not present or could not be loaded.
    [ 4.502194] registered taskstats version 1
    [ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
    [ 4.512569] Initializing network drop monitor service
    [ 4.516031] Freeing unused kernel memory: 712k freed
    [ 4.516201] Write protecting the kernel read-only data: 6144k
    [ 4.516747] Freeing unused kernel memory: 12k freed
    [ 4.522858] Freeing unused kernel memory: 776k freed
    [ 4.564188] udevd[93]: starting version 173
    [ 4.566281] ACPI: acpi_idle yielding to intel_idle
    [ 4.624591] SCSI subsystem initialized
    [ 4.630767] libata version 3.00 loaded.
    [ 4.632419] ahci 0000:00:1f.2: version 3.0
    [ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.632554] ahci: SSS flag set, parallel bus scan disabled
    [ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
    [ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.634910] scsi0 : ahci
    [ 4.635536] scsi1 : ahci
    [ 4.636083] scsi2 : ahci
    [ 4.636721] scsi3 : ahci
    [ 4.637168] scsi4 : ahci
    [ 4.637475] scsi5 : ahci
    [ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
    [ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
    [ 4.637733] ata3: DUMMY
    [ 4.637734] ata4: DUMMY
    [ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
    [ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
    [ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
    [ 4.861939] Switching to clocksource tsc
    [ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
    [ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.975693] ata1.00: configured for UDMA/133
    [ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
    [ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
    [ 5.303748] ata2.00: configured for UDMA/100
    [ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
    [ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
    [ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
    [ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.667393] udevd[273]: starting version 173
    [ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 10.447052] ACPI: Lid Switch [LID0]
    [ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 10.449952] ACPI: Power Button [PWRB]
    [ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
    [ 10.484243] acpi device:4b: registered as cooling_device4
    [ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
    [ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
    [ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
    [ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
    [ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
    [ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 10.773153] iTCO_vendor_support: vendor-support=0
    [ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.926971] sky2: driver version 1.28
    [ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
    [ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
    [ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
    [ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
    [ 11.030984] usbcore: registered new interface driver usbfs
    [ 11.031163] usbcore: registered new interface driver hub
    [ 11.031208] usbcore: registered new device driver usb
    [ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
    [ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
    [ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
    [ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.269177] mei 0000:00:16.0: setting latency timer to 64
    [ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 11.354358] sdhci: Secure Digital Host Controller Interface driver
    [ 11.354362] sdhci: Copyright(c) Pierre Ossman
    [ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
    [ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
    [ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 11.389714] hub 1-0:1.0: USB hub found
    [ 11.389721] hub 1-0:1.0: 2 ports detected
    [ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
    [ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
    [ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 11.406377] hub 2-0:1.0: USB hub found
    [ 11.406382] hub 2-0:1.0: 2 ports detected
    [ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
    [ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
    [ 11.515145] Registered led device: mmc0::
    [ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
    [ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
    [ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
    [ 11.515308] Registered led device: mmc1::
    [ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
    [ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
    [ 11.823379] hub 1-1:1.0: USB hub found
    [ 11.823555] hub 1-1:1.0: 6 ports detected
    [ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
    [ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 11.931327] ath: EEPROM regdomain: 0x65
    [ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
    [ 11.931333] ath: Country alpha2 being used: 00
    [ 11.931334] ath: Regpair used: 0x65
    [ 12.053537] hub 2-1:1.0: USB hub found
    [ 12.053638] hub 2-1:1.0: 8 ports detected
    [ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 12.058344] Disabling lock debugging due to kernel taint
    [ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
    [ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
    [ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
    [ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 12.090577] pci 0000:01:00.0: setting latency timer to 64
    [ 12.090779] [fglrx] Kernel PAT support is enabled
    [ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
    [ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 12.101452] Registered led device: ath9k-phy0
    [ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
    [ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
    [ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
    [ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 12.387463] cfg80211: World regulatory domain updated:
    [ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387493] cfg80211: Calling CRDA for country: IT
    [ 12.390329] cfg80211: Regulatory domain changed to country: IT
    [ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
    [ 12.939879] Linux media interface: v0.10
    [ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
    [ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
    [ 12.994502] usbcore: registered new interface driver usbhid
    [ 12.994504] usbhid: USB HID core driver
    [ 13.030968] Linux video capture interface: v2.00
    [ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
    [ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
    [ 13.061057] usbcore: registered new interface driver uvcvideo
    [ 13.061059] USB Video Class driver (v1.1.0)
    [ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 15.505206] SGI XFS Quota Management subsystem
    [ 15.527846] XFS (sda10): Mounting Filesystem
    [ 16.058466] XFS (sda10): Ending clean mount
    [ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
    [ 16.172257] REISERFS (device sda8): using ordered data mode
    [ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
    [ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
    [ 16.362086] EXT3-fs: barriers not enabled
    [ 16.377355] kjournald starting. Commit interval 5 seconds
    [ 16.377554] EXT3-fs (sda6): using internal journal
    [ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
    [ 16.475339] fuse init (API version 7.16)
    [ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
    Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

  • Audio issues after upgrading to OS X 10.10 (Yosemite)

    Hello,
    I have been facing audio issues after upgrading to OS X 10.10
    - No sound in VLC
    - Re-booting with Option-Command-P-R did not work
    - System sounds are fine
    - Quicktime Player works just fine
    I tried:
    - Plugging in earphones while video was playing on VLC
    - F10/F11/F12 while video was playing on VLC
    - Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
    - Played something in Garage Band (found on a thread elsewhere) and restarted VLC
    None of the above solved the issue
    Any one else facing similar issue with VLC on 10.10?
    How did you manage to fix this?
    I am running VLC 2.1.5 btw.
    Thanks in advance!

    Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
    Youtube, QuickTime, all play with no sound at all.

  • [SOLVED]X start failure after upgrade: dri3,present modules missing

    I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
    (EE) Server terminated with error (1).Closing log file.
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    Xorg.log.0 :
    [51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
    [51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
    Installed packages (EDIT: completed):
    xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
    intel-dri 10-2.7-3
    dri2proto 2.8-2
    dri3proto 1.0-1
    xf86driproto 2.1.1-3
    Linux 3.15.5-2-ARCH i686
    Linux CK Atom 3.16.2-1
    Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
    Atom netbook
    lspci:
    00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
    Some refs :
        » [SOLVED] X start failure after upgrade    https://bbs.archlinux.org/viewtopic.php?pid=1426837
        » [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
    Last edited by kozaki (2014-09-12 09:45:53)

    The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
    same issue if:
    - Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
    - Adding    Option "DRI" "False"
    Digged a bit:
    - same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
    - same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
    makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
    Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
    Last edited by kozaki (2014-09-11 11:05:42)

  • Issue after upgrading SOLMAN-Kernel to 700-201

    Hi Gurus,
    I have upgraded SOLMAN Kernel from 700-144 to 700-201. I have done step by step upgrade i.e.,
    700-147 to 700-175 - No issues
    700-175 to 700-201 - Server started partially.
    In the Console, the server is partially started after upgrading from 175 to 201(Yellow and Green).
    "Dispatcher Running but not connected to Message Server, J2EE: All processes  running"
    I am able to login to all clients as well as J2EE.
    are there any patch or any OSS notes to implement after upgrading to Kernel 700-201?
    SOLMAN:
    SP-17
    WIN-32
    Thanks in advance...
    Regards
    Shreeshail Ganiger

    Dear Shreeshail,
    Try to upgrade your kernel to 221, there are quite issues with 201for some installations.
    Check if your satstartsrv.exe has been updated with new version too. this you can check with file version by right clicking.
    Regards
    Shailesh

  • [SOLVED] nfsroot install broken after kernel upgrade 3.5.6 to 3.6.2

    It seems my nfsroot installations have broken after the kernel upgrade to 3.6.2.
    This is as far as the boot process gets now (hand copied from the screen):
    IP-Config: eth0 complete (from 10.48.50.20):
    address: 10.48.50.240 broadcast: 10.48.50.255 netmask: 255.255.255.0
    gateway: 0.0.0.0 dns0 : 0.0.0.0 dns1: 0.0.0.0
    domain : local
    rootserver: 10.48.50.20 rootpath:
    filename : /var/tftpboot/pxelinux.0
    NFS-Mount: 10.48.50.20:/srv/nfs4/kvmhost0-rootfs
    Waiting 10 seconds for device /dev/nfs ...
    mount: Protocol not supported
    :: running cleanup hook [udev]
    ERROR: Failed to mount the real root device.
    Bailing out, you are on your own. Good luck.
    sh: can't access tty; job control turned off
    [rootfs /]#
    On the server this is what is logged:
    Oct 16 21:10:04 tuon dhcpd: DHCPDISCOVER from 00:21:70:eb:02:25 via san
    Oct 16 21:10:04 tuon dhcpd: DHCPOFFER on 10.48.50.240 to 00:21:70:eb:02:25 via san
    Oct 16 21:10:04 tuon dhcpd: DHCPREQUEST for 10.48.50.240 (10.48.50.20) from 00:21:70:eb:02:25 via san
    Oct 16 21:10:04 tuon dhcpd: DHCPACK on 10.48.50.240 to 00:21:70:eb:02:25 via san
    Oct 16 21:10:14 tuon rpc.mountd[1323]: authenticated mount request from 10.48.50.240:684 for /srv/nfs4/kvmhost0-rootfs (/srv/nfs4/kvmhost0-rootfs)
    Oct 16 21:10:14 tuon rpc.mountd[1323]: refused unmount request from 10.48.50.240 for /new_root (/): not exported
    It looks to me like the client is sending the mount request, the server accepts and then for some reason the client thinks it has failed. I can't even see anything strange in the wireshark traces comparing the working client (3.5.6) to the broken one (3.6.2).
    Anyone else using nfsroot successfully with the latest kernel?
    Any other ideas?
    (by the way - despite my directory names, this is using nfs v3 for the rootfs)
    Last edited by kmshanah (2012-10-18 03:18:07)

    mikep wrote:
    Just to confirm that I also have this problem with nfsroot (nfs4 this time) with 3.6.2. Downgrading the kernel does make it go away.
    When it is working normally I do seem to get refused unmount messages at shutdown for some reason
    refused unmount request from 192.168.1.86 for / (/): not exported
    , but the /new_root bit is new and I have no idea where it comes from.
    refused unmount request from 192.168.1.86 for /new_root (/): not exported
    So I wonder if it asking for the wrong path.
    That unmount issue will be solved by FS#32021.
    Unfortunately, that doesn't help with mounting in the first place with 3.6.2

  • No HDMI audio out after Windows 7 Upgrade

    I have a DV4-1123US with an Intel Integrated Graphics Card(X4500, I think), and Intel High Definition Audio HDMI.  After upgrading to Win7, there is now no longer an option to set HDMI to use as audio.  In other words, HDMI no longer shows up in the Audio Devices window.  Video works fine.  It seems that I am not the only one having this problem, but does anyone have a solution?  Is this something that we just have to wait on an updated driver for?  I downloaded the most recent video driver from Intel, but Intel for some reason does not recognize my audio driver...

    Never mind, problem solved.  I have the Intel chipset for video.  I went to Intel's website, they have a utility under chipset support to tell you if you have the latest driver.  I ran the utility, it told me what I needed, I downloaded it, and after reboot, I have sound through HDMI.

  • [Solved]Terminology - Broken after upgrade

    After running a system update it appears that Terminology is no longer working correctly.
    i.e:
    Background does not render properly, just shows black screen, Cannot use rightclick to make modifications, etc
    Has anyone else experienced this issue?
    =====================================
    Fix:
    Downgrade to package 0.6.1-1 from cache
    pacman -U /var/cache/pacman/pkg/terminology-0.6.1-1-x86_64.pkg.tar.xz
    =====================================
    Last edited by cyberpsych0sis (2014-11-12 02:59:41)

    jasonwryan wrote:
    Start it from another terminal and see what error it prints...
    Also, please paste the list of packages that were included in your last upgrade.
    Output from the pacman.log after upgrade:
    [2014-11-11 18:21] [PACMAN] Running 'pacman -Syu'
    [2014-11-11 18:21] [PACMAN] synchronizing package lists
    [2014-11-11 18:22] [PACMAN] starting full system upgrade
    [2014-11-11 18:30] [PACMAN] upgraded at-spi2-core (2.14.0-1 -> 2.14.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded avahi (0.6.31-13 -> 0.6.31-14)
    [2014-11-11 18:30] [PACMAN] upgraded ca-certificates-mozilla (3.17.1-1 -> 3.17.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded calibre (2.8.0-1 -> 2.9.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded kmod (18-1 -> 18-2)
    [2014-11-11 18:30] [PACMAN] upgraded libsystemd (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] installed lz4 (123-1)
    [2014-11-11 18:30] [PACMAN] upgraded systemd (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] upgraded colord (1.2.3-1 -> 1.2.5-1)
    [2014-11-11 18:30] [PACMAN] upgraded curl (7.38.0-3 -> 7.39.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded dhcpcd (6.6.0-1 -> 6.6.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded gcc-libs (4.9.1-2 -> 4.9.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded poppler (0.26.5-1 -> 0.28.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded evas_generic_loaders (1.11.2-1 -> 1.11.2-2)
    [2014-11-11 18:30] [PACMAN] upgraded fakeroot (1.20.1-1 -> 1.20.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded gcc (4.9.1-2 -> 4.9.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded gnutls (3.3.9-1 -> 3.3.10-1)
    [2014-11-11 18:30] [PACMAN] upgraded gstreamer (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base-libs (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gtk3 (3.14.4-2 -> 3.14.5-1)
    [2014-11-11 18:30] [PACMAN] upgraded ldns (1.6.17-1 -> 1.6.17-2)
    [2014-11-11 18:30] [PACMAN] upgraded libedit (20140620_3.1-1 -> 20141030_3.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded libffi (3.1-2 -> 3.1-3)
    [2014-11-11 18:30] [PACMAN] upgraded libltdl (2.4.2-14 -> 2.4.2-15)
    [2014-11-11 18:30] [PACMAN] upgraded libtool (2.4.2-14 -> 2.4.2-15)
    [2014-11-11 18:30] [PACMAN] upgraded logrotate (3.8.7-3 -> 3.8.8-2)
    [2014-11-11 18:30] [PACMAN] upgraded man-db (2.7.0.2-2 -> 2.7.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa-dri (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa-libgl (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded nss (3.17.1-1 -> 3.17.2-1)
    [2014-11-11 18:30] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-11-11 18:30] [PACMAN] upgraded pacman-mirrorlist (20141028-1 -> 20141108-1)
    [2014-11-11 18:30] [PACMAN] upgraded poppler-glib (0.26.5-1 -> 0.28.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded python-pygments (1.6-4 -> 2.0.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded systemd-sysvcompat (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] upgraded terminology (0.6.1-1 -> 0.7.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded xorg-server-common (1.16.1-1 -> 1.16.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded xorg-server (1.16.1-1 -> 1.16.2-1)
    And when I run Terminology from Xterm it doesn't seem to provide any errors.

  • Random Kernel Panic after upgrade to kernel 2.6.36

    Hello,
    First of all, I apologise if this topic has already come up on the forums, but i've checked and can't see anything specifically relating to the problem im having, and ive also checked the bugs section of Archwiki and can't seem to see anything on there either. I'm not sure what information you guys need so ill just post as much as I can think of in this thread and then if you need any other info, ill post it on request.
    The problem im having relates to a recent system update, which I did sometime within the past 4 weeks or so, after not upgrading for quite a while due to lack of free time.
    In the last update I remember seeing it upgrading the kernel from 2.6.35 to 2.6.36, and since then I have been getting completly random kernel panics, whereby everything freezes. If I have audio output, the sound crashes and everything freezes, and the caps lock and scroll lock lights just flash in sync on the keyboard.
    I have never had any problems like this in all the 7 months that i've been using Arch as a permenant OS.
    Hardware:
    Mobo: ASRock 775Dual-VSTA
    Ram: 2GB (2x 1GB different brand sticks, same specs)
    CPU: Intel Core 2 Duo 1.6GHz
    GFX: Nvidia 8800GT 512MB
    Plug and Play hardware that is normally always connected:
    1. Zoom Wireless Dongle (4410b chipset, using ndiswrapper and the Zoom windows driver)
    2. Digital TV Stick (Artec T1) with specific firmware and using MeTV as a viewer.
    I've looked in all of the logs, including: dmesg, everything.log, daemon.log, errors.log, messages.log and all the other logs. But there is very little information relating to the crash in there. I'm guessing this is because its a kernel panic so it doesn't have chance to dump anything into the logs before it all crashes? If needs be I can post whichever logs you think will be most useful, but i'm using my laptop at the minute so I wont get chance to post them until tomorrow evening.
    I've also tried enabling the testing repos and upgraded to kernel 2.6.37-1 to see if this suspected bug is fixed, but the panic seems to happen the same, if not more with kernel 2.6.37-1. At the minute I've rolled my system back to kernel 2.6.36 because it seemed a little more stable.
    It doesn't just crash when your in the X server either. Theres been a few times when i've had a kernel panic during boot. Sometimes a couple of seconds after it starts to boot into Arch. And sometimes just as its processing the Udev events. But as I say it seems completely random rather than relating to specific events.
    During one of the crashes at boot I got an error message on the screen which read:
    Setting Latency Timer to 64
    HDA Intel 0000:80:01.0: PCI: disallowing DAC for device
    [<c131621b>] ? error_code+0x67/0x6c
    Thats as much as I can think of at the minute. As I say, if you need any more information or need me to paste my log files then let me know and i will do that tomorrow.
    Thanks in advance for the help, its much appreciated.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 01:18:26)

    Hi Daniel,
    I'm just guessing that its a kenel panic, as when it happens both the caps lock and scroll lock lights flash in sync, which is a sign of kernel panic isn't it?
    My cpu is i686.
    I've just read that post and i've downgraded udev to 164-3 to see if this solves the problem as some people have said in that post, although others later on in the thread say that this doesn't solve it for them. This morning it took me 4 restarts just to get arch to boot without the panic. I took a picture of the screen during the panic which ill post after work this evening, it looks pretty similar to the picture posted by "rabid_works" in the thread you pasted. I'm not sure about your post in the other threat that relates to the errors in the Oops report, could you clarify this so I can see if the problems reported in that thread are what I am experiencing?.
    In the meantime, here is my pacman.log from 26.12.10 when I did the upgrade and the problems started. (note I have done upgrades following 26.12.10 to see if anything fixed the problem but with no luck, that is why the log is so long and I don't have any hosting anymore, so i've had to post it in quotes, I apologise).
    [2010-12-26 15:13] Running 'pacman -Sy'
    [2010-12-26 15:13] synchronizing package lists
    [2010-12-26 15:14] Running 'pacman -Syu'
    [2010-12-26 15:14] synchronizing package lists
    [2010-12-26 15:14] starting full system upgrade
    [2010-12-26 15:35] Running 'pacman -Syu'
    [2010-12-26 15:35] synchronizing package lists
    [2010-12-26 15:35] starting full system upgrade
    [2010-12-26 16:45] removed libusb1 (1.0.8-1)
    [2010-12-26 16:45] removed pycairo (1.8.10-2)
    [2010-12-26 16:45] removed python-numpy (1.5.0-2)
    [2010-12-26 16:45] upgraded gnome-menus (2.30.4-2 -> 2.30.5-1)
    [2010-12-26 16:45] upgraded gnome-desktop (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:45] upgraded tzdata (2010n-1 -> 2010o-1)
    [2010-12-26 16:45] Generating locales...
    [2010-12-26 16:45]   en_GB.UTF-8... done
    [2010-12-26 16:45]   en_US.UTF-8... done
    [2010-12-26 16:46]   en_US.ISO-8859-1... done
    [2010-12-26 16:46] Generation complete.
    [2010-12-26 16:46] upgraded glibc (2.12.1-3 -> 2.12.1-4)
    [2010-12-26 16:46] upgraded gcc-libs (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:46] upgraded pcre (8.10-1 -> 8.11-1)
    [2010-12-26 16:46] upgraded glib2 (2.26.0-2 -> 2.26.1-1)
    [2010-12-26 16:46] upgraded zlib (1.2.5-2 -> 1.2.5-3)
    [2010-12-26 16:46] upgraded ncurses (5.7-3 -> 5.7-4)
    [2010-12-26 16:46] upgraded readline (6.1.002-1 -> 6.1.002-2)
    [2010-12-26 16:46] upgraded libxml2 (2.7.7-2 -> 2.7.8-1)
    [2010-12-26 16:46] upgraded bash (4.1.009-1 -> 4.1.009-3)
    [2010-12-26 16:46] upgraded findutils (4.4.2-2 -> 4.4.2-3)
    [2010-12-26 16:46] upgraded gzip (1.4-1 -> 1.4-2)
    [2010-12-26 16:46] upgraded texinfo (4.13a-4 -> 4.13a-5)
    [2010-12-26 16:46] upgraded libtasn1 (2.6-1 -> 2.8-1)
    [2010-12-26 16:46] upgraded gnutls (2.8.6-1 -> 2.10.4-1)
    [2010-12-26 16:46] upgraded libsoup (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:46] upgraded db (5.1.19-2 -> 5.1.19-3)
    [2010-12-26 16:46] upgraded openssl (1.0.0.a-3 -> 1.0.0.c-1)
    [2010-12-26 16:46] upgraded sqlite3 (3.7.3-1 -> 3.7.4-1)
    [2010-12-26 16:46] upgraded heimdal (1.3.3-2 -> 1.3.3-4)
    [2010-12-26 16:46] upgraded evolution-data-server (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded inputproto (2.0-1 -> 2.0.1-1)
    [2010-12-26 16:46] upgraded libxi (1.3.2-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded libpng (1.4.4-1 -> 1.4.5-1)
    [2010-12-26 16:46] upgraded expat (2.0.1-5 -> 2.0.1-6)
    [2010-12-26 16:46] upgraded xproto (7.0.18-1 -> 7.0.20-1)
    [2010-12-26 16:46] upgraded libx11 (1.3.5-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded attr (2.4.44-1 -> 2.4.44-2)
    [2010-12-26 16:46] upgraded libcap (2.19-1 -> 2.19-2)
    [2010-12-26 16:46] upgraded coreutils (8.6-1 -> 8.7-1)
    [2010-12-26 16:46] warning: /etc/hosts installed as /etc/hosts.pacnew
    [2010-12-26 16:46] warning: /etc/gshadow installed as /etc/gshadow.pacnew
    [2010-12-26 16:46] upgraded filesystem (2010.10-1 -> 2010.12-1)
    [2010-12-26 16:46] upgraded dbus-core (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded dbus (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded avahi (0.6.27-7 -> 0.6.28-1)
    [2010-12-26 16:46] upgraded libcups (1.4.4-3 -> 1.4.5-2)
    [2010-12-26 16:46] upgraded gdk-pixbuf2 (2.22.0-2 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded gtk2 (2.22.0-5 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded librsvg (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded libogg (1.2.0-1 -> 1.2.2-1)
    [2010-12-26 16:46] upgraded libvorbis (1.3.1-1 -> 1.3.2-1)
    [2010-12-26 16:46] upgraded gstreamer0.10 (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded libcanberra (0.25-1 -> 0.26-3)
    [2010-12-26 16:46] upgraded libwnck (2.30.5-1 -> 2.30.6-1)
    [2010-12-26 16:46] upgraded gnome-panel (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded alacarte (0.13.2-2 -> 0.13.2-3)
    [2010-12-26 16:46] upgraded alsa-utils (1.0.23-2 -> 1.0.23-3)
    [2010-12-26 16:46] upgraded amsn (0.98.3-4 -> 0.98.4-1)
    [2010-12-26 16:46] upgraded libusb (0.1.12-4 -> 1.0.8-1)
    [2010-12-26 16:46] installed libusb-compat (0.1.3-1)
    [2010-12-26 16:46] upgraded ardour (2.8.11-1 -> 2.8.11-2)
    [2010-12-26 16:46] upgraded automake (1.11.1-1 -> 1.11.1-2)
    [2010-12-26 16:46] upgraded bluez (4.77-1 -> 4.82-1)
    [2010-12-26 16:46] upgraded boost-libs (1.43.0-2 -> 1.45.0-1)
    [2010-12-26 16:46] upgraded orc (0.4.7-1 -> 0.4.11-1)
    [2010-12-26 16:46] upgraded udev (163-1 -> 164-3)
    [2010-12-26 16:46] upgraded gstreamer0.10-base (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded gstreamer0.10-base-plugins (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded file (5.04-2 -> 5.04-3)
    [2010-12-26 16:46] upgraded cdrkit (1.1.10-1 -> 1.1.11-1)
    [2010-12-26 16:46] upgraded libao (1.0.0-2 -> 1.0.0-5)
    [2010-12-26 16:46] upgraded cdrdao (1.2.3-4 -> 1.2.3-5)
    [2010-12-26 16:46] upgraded brasero (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded run-parts (3.2.3-1 -> 3.4.1-1)
    [2010-12-26 16:46] upgraded sed (4.2.1-2 -> 4.2.1-3)
    [2010-12-26 16:46] Clearing symlinks in /etc/ssl/certs...done.
    [2010-12-26 16:46] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
    [2010-12-26 16:46] Running hooks in /etc/ca-certificates/update.d....
    [2010-12-26 16:46] updating keystore /etc/ssl/certs/java/cacerts...
    [2010-12-26 16:46]   added: /etc/ssl/certs/brasil.gov.br.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cacert.org.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ca.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_dsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_rsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_External_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Low-Value_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Public_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Qualified_Certificates_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Baltimore_CyberTrust_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/COMODO_Certification_Authority.pem
    [2010-12-26 16:46]   ignored import, signature not available: /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem
    [2010-12-26 16:46] keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Chambers_of_Commerce_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Global_Chambersign_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certplus_Class_2_Primary_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certum_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Comodo_AAA_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Secure_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Trusted_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_ACES_CA_X6.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_Root_CA_X3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Assured_ID_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Global_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_High_Assurance_EV_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiNotar_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_4.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Premium_2048_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust_Root_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_Global_eBusiness_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Firmaprofesional_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Global_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Primary_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA_-_R2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Go_Daddy_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Chained_CAs_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Servidores_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Timestamping_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Business_=Class_B=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Express_=Class_C=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Notary_=Class_A=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Qualified_=Class_QA=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Network_Solutions_Certificate_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Root_Certificate_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_1024_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_2048_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/SecureTrust_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Secure_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Security_Communication_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_1_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_2_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Staat_der_Nederlanden_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Starfield_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Ltd..pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Gold_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Platinum_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Silver_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Swisscom_Root_CA_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_2_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_3_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_Internet_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_OCES_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Taiwan_GRCA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Basic_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Freemail_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Premium_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Premium_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Time_Stamping_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN-USER_First-Network_Applications.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_DATACorp_SGC_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Email_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_1_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_2_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_RSA_Secure_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Time_Stamping_Authority_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_International_Global_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_eCommerce_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/WellsSecure_Public_Root_Certificate_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Wells_Fargo_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/XRamp_Global_CA_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA-Baltimore_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_Entrust_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_RSA_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/thawte_Primary_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca1_pem.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_rootca_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_tsa1_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-ca-2003.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-cacert-2008.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/deutsche-telekom-root-ca-2.pem
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] upgraded ca-certificates (20090814-3 -> 20090814+nmu2-1)
    [2010-12-26 16:49] upgraded ca-certificates-java (20090629-2 -> 20100412-2)
    [2010-12-26 16:49] upgraded cairomm (1.8.4-1 -> 1.8.6-1)
    [2010-12-26 16:49] upgraded curl (7.21.2-2 -> 7.21.3-1)
    [2010-12-26 16:49] upgraded dbus-glib (0.86-1 -> 0.92-1)
    [2010-12-26 16:49] upgraded python2 (2.7-3 -> 2.7.1-3)
    [2010-12-26 16:49] upgraded libtorrent-rasterbar (0.15.4-2 -> 0.15.4-3)
    [2010-12-26 16:49] upgraded twisted (10.1.0-1 -> 10.2.0-1)
    [2010-12-26 16:49] installed python2-chardet (2.0.1-3)
    [2010-12-26 16:49] >>> Deluge's daemon is running default with the "deluge" user. The default download directory is /srv/deluge/.
    [2010-12-26 16:49]     You can change the user by editing /etc/conf.d/deluged
    [2010-12-26 16:49] upgraded deluge (1.3.1-1 -> 1.3.1-2)
    [2010-12-26 16:49] upgraded device-mapper (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:49] upgraded dhcpcd (5.2.8-1 -> 5.2.9-1)
    [2010-12-26 16:49] upgraded diffutils (3.0-1 -> 3.0-2)
    [2010-12-26 16:49] upgraded dnsutils (9.7.1.P2-1 -> 9.7.2.P3-1)
    [2010-12-26 16:49] upgraded eog (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded ethtool (6-2 -> 2.6.35-2)
    [2010-12-26 16:49] upgraded fakeroot (1.14.4-2 -> 1.14.5-1)
    [2010-12-26 16:49] upgraded feh (1.10-1 -> 1.10.1-1)
    [2010-12-26 16:49] upgraded sdl (1.2.14-5 -> 1.2.14-6)
    [2010-12-26 16:49] upgraded schroedinger (1.0.9-1 -> 1.0.10-1)
    [2010-12-26 16:49] upgraded libvpx (0.9.5-1 -> 0.9.5-2)
    [2010-12-26 16:49] upgraded libdrm (2.4.21-2 -> 2.4.22-3)
    [2010-12-26 16:49] upgraded pixman (0.18.4-1 -> 0.20.0-1)
    [2010-12-26 16:49] upgraded xorg-server-common (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded xorg-server (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded nvidia-utils (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:49] upgraded libva (1.0.5-2 -> 1.0.6-1)
    [2010-12-26 16:49] upgraded ffmpeg (25472-1 -> 25679-1)
    [2010-12-26 16:49] upgraded file-roller (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded xulrunner (1.9.2.12-1 -> 1.9.2.13-2)
    [2010-12-26 16:49] upgraded firefox (3.6.12-1 -> 3.6.13-1)
    [2010-12-26 16:49] upgraded flashplugin (10.1.85.3-1 -> 10.1.102.65-1)
    [2010-12-26 16:49] installed libasyncns (0.8-3)
    [2010-12-26 16:49] installed libpulse (0.9.22-2)
    [2010-12-26 16:49] upgraded fluidsynth (1.1.3-1 -> 1.1.3-2)
    [2010-12-26 16:49] upgraded freetype2 (2.4.3-1 -> 2.4.4-1)
    [2010-12-26 16:49] upgraded gawk (3.1.8-1 -> 3.1.8-2)
    [2010-12-26 16:49] upgraded gcalctool (5.32.0-2 -> 5.32.2-1)
    [2010-12-26 16:49] upgraded gcc (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:49] upgraded gen-init-cpio (2.6.32-1 -> 2.6.36-1)
    [2010-12-26 16:49] upgraded ghostscript (9.00-1 -> 9.00-2)
    [2010-12-26 16:49] upgraded gmime (2.4.19-1 -> 2.4.21-1)
    [2010-12-26 16:49] upgraded gucharmap (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded libnotify (0.4.5-1.1 -> 0.5.2-1)
    [2010-12-26 16:50] upgraded gnome-applets (2.32.0-3 -> 2.32.1.1-1)
    [2010-12-26 16:50] installed libgnome-data (2.32.0-3)
    [2010-12-26 16:50] upgraded gnome-settings-daemon (2.32.0-1 -> 2.32.1-2)
    [2010-12-26 16:50] upgraded gnome-control-center (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-gconf (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-games (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded libsoup-gnome (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good-plugins (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded gnome-media (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:50] upgraded gnome-panel-bonobo (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-bonobo (2.28.1-5)
    [2010-12-26 16:50] installed python2-libgnome (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomecanvas (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomevfs (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-python (2.28.1-3 -> 2.28.1-5)
    [2010-12-26 16:50] upgraded polkit (0.98-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded procps (3.2.8-1 -> 3.2.8-3)
    [2010-12-26 16:50] upgraded pm-utils (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:50] upgraded upower (0.9.6-0.20100929 -> 0.9.7-2)
    [2010-12-26 16:50] upgraded polkit-gnome (0.97-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded gnome-session (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded vte (0.26.1-1 -> 0.26.2-1)
    [2010-12-26 16:50] upgraded gnome-terminal (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnome-themes (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnupg (1.4.11-1 -> 1.4.11-2)
    [2010-12-26 16:50] upgraded gnupg2 (2.0.16-2 -> 2.0.16-3)
    [2010-12-26 16:50] installed atkmm (2.22.1-1)
    [2010-12-26 16:50] upgraded gtkmm (2.20.3-1 -> 2.22.0-1)
    [2010-12-26 16:50] upgraded gparted (0.7.0-1 -> 0.7.1-1)
    [2010-12-26 16:50] upgraded gpm (1.20.6-5 -> 1.20.6-6)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded libdc1394 (2.1.2-1 -> 2.1.2-2)
    [2010-12-26 16:50] installed gsm (1.0.13-6)
    [2010-12-26 16:50] installed rtmpdump (2.3-3)
    [2010-12-26 16:50] installed libgme (0.5.5-3)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad-plugins (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ffmpeg (0.10.10-1 -> 0.10.11-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly-plugins (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gtk-engine-murrine (0.98.1.1-1 -> 0.98.1.1-2)
    [2010-12-26 16:50] upgraded gtk-vnc (0.3.10-2 -> 0.4.2-2)
    [2010-12-26 16:50] upgraded gvfs (1.6.5-2 -> 1.6.6-1)
    [2010-12-26 16:50] upgraded usbutils (0.90-1 -> 0.91-4)
    [2010-12-26 16:50] upgraded hal (0.5.14-4 -> 0.5.14-5)
    [2010-12-26 16:50] upgraded hyphen (2.6-1 -> 2.7.1-1)
    [2010-12-26 16:50] upgraded icu (4.4.2-1 -> 4.6-1)
    [2010-12-26 16:50] upgraded inetutils (1.8-1 -> 1.8-2)
    [2010-12-26 16:50] upgraded initscripts (2010.07-1 -> 2010.07-2)
    [2010-12-26 16:50] upgraded iptables (1.4.9-1 -> 1.4.10-1)
    [2010-12-26 16:50] upgraded ipw2100-fw (1.3-4 -> 1.3-5)
    [2010-12-26 16:50] upgraded ipw2200-fw (3.1-2 -> 3.1-3)
    [2010-12-26 16:50] upgraded isdn4k-utils (3.2p1-5 -> 3.2p1-6)
    [2010-12-26 16:50] upgraded jfsutils (1.1.14-1 -> 1.1.14-2)
    [2010-12-26 16:50] upgraded linux-firmware (20100911-1 -> 20101108-1)
    [2010-12-26 16:50] >>> Updating module dependencies. Please wait ...
    [2010-12-26 16:50] >>> MKINITCPIO SETUP
    [2010-12-26 16:50] >>> ----------------
    [2010-12-26 16:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-12-26 16:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-12-26 16:50] >>> More information about mkinitcpio setup can be found here:
    [2010-12-26 16:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-12-26 16:50]
    [2010-12-26 16:50] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2010-12-26 16:50] ==> Building image "default"
    [2010-12-26 16:50] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-12-26 16:50] :: Begin build
    [2010-12-26 16:50] :: Parsing hook [base]
    [2010-12-26 16:50] :: Parsing hook [udev]
    [2010-12-26 16:50] :: Parsing hook [autodetect]
    [2010-12-26 16:50] :: Parsing hook [pata]
    [2010-12-26 16:50] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] ==> Building image "fallback"
    [2010-12-26 16:51] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-12-26 16:51] :: Begin build
    [2010-12-26 16:51] :: Parsing hook [base]
    [2010-12-26 16:51] :: Parsing hook [udev]
    [2010-12-26 16:51] :: Parsing hook [pata]
    [2010-12-26 16:51] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] upgraded kernel26 (2.6.35.8-1 -> 2.6.36.2-1)
    [2010-12-26 16:51] upgraded less (436-1 -> 436-2)
    [2010-12-26 16:51] upgraded libdvdcss (1.2.10-1.1 -> 1.2.10-2)
    [2010-12-26 16:51] upgraded libgnome (2.32.0-1 -> 2.32.0-3)
    [2010-12-26 16:51] upgraded libgssglue (0.1-2 -> 0.1-3)
    [2010-12-26 16:51] upgraded libmpdclient (2.2-1 -> 2.3-1)
    [2010-12-26 16:51] upgraded libmtp (1.0.2-1 -> 1.0.2-2)
    [2010-12-26 16:51] upgraded libpcap (1.1.1-1 -> 1.1.1-2)
    [2010-12-26 16:51] upgraded libpurple (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:51] upgraded libwebkit (1.2.5-1 -> 1.2.5-2)
    [2010-12-26 16:51] upgraded libwpd (0.8.14-1 -> 0.9.0-1)
    [2010-12-26 16:51] upgraded lvm2 (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:51] upgraded lzo2 (2.03-1 -> 2.04-1)
    [2010-12-26 16:51] upgraded man-db (2.5.7-1 -> 2.5.9-1)
    [2010-12-26 16:51] upgraded man-pages (3.29-1 -> 3.32-1)
    [2010-12-26 16:51] upgraded me-tv (1.3.4-1 -> 1.3.5-1)
    [2010-12-26 16:51] upgraded mesa (7.8.2-3 -> 7.9.0.git20101207-2)
    [2010-12-26 16:51] upgraded mousetweaks (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:51] upgraded mpd (0.15.13-1 -> 0.16-2)
    [2010-12-26 16:51] upgraded mpfr (3.0.0.p4-1 -> 3.0.0.p8-1)
    [2010-12-26 16:52] upgraded nano (2.2.5-1 -> 2.2.6-1)
    [2010-12-26 16:52] upgraded nautilus (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:52] module configuration already contains alias directive
    [2010-12-26 16:52]
    [2010-12-26 16:52] upgraded ndiswrapper (1.56-5 -> 1.56-6)
    [2010-12-26 16:52] upgraded wireless_tools (29-3 -> 29-4)
    [2010-12-26 16:52] warning: directory permissions differ on var/lib/NetworkManager/
    filesystem: 755  package: 700
    [2010-12-26 16:52] ATTENTION:
    [2010-12-26 16:52]   /etc/NetworkManager/nm-system-settings.conf has been replaced
    [2010-12-26 16:52]   by /etc/NetworkManager/NetworkManager.conf. Make sure you move
    [2010-12-26 16:52]   any custom settings to the new config file.
    [2010-12-26 16:52] upgraded networkmanager (0.8.1-1 -> 0.8.3-0.20101130)
    [2010-12-26 16:52] upgraded network-manager-applet (0.8.1-2 -> 0.8.2-2)
    [2010-12-26 16:52] upgraded nfsidmap (0.23-3 -> 0.23-4)
    [2010-12-26 16:52] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2010-12-26 16:52] upgraded nvidia (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:52] when you use a non-reparenting window manager
    [2010-12-26 16:52] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2010-12-26 16:52] /etc/profile.d/openjdk6.sh
    [2010-12-26 16:52] upgraded openjdk6 (6.b20_1.9.1-1 -> 6.b20_1.9.3-1)
    [2010-12-26 16:52] upgraded raptor (1.4.21-1 -> 1.4.21-2)
    [2010-12-26 16:52] upgraded rasqal (0.9.20-1 -> 0.9.21-1)
    [2010-12-26 16:52] upgraded redland (1.0.12-2 -> 1.0.12-3)
    [2010-12-26 16:52]  * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2010-12-26 16:52]  * see http://wiki.archlinux.org/index.php/Openoffice
    [2010-12-26 16:52]    how to use extensions, e.g. for spell checking
    [2010-12-26 16:52]    see /usr/lib/openoffice/share/extension/install what
    [2010-12-26 16:52]    is shipped with this package
    [2010-12-26 16:52]  * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2010-12-26 16:52] upgraded openoffice-base (3.2.1-3 -> 3.2.1-4)
    [2010-12-26 16:52] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2010-12-26 16:52] upgraded pacman-mirrorlist (20100825-1 -> 20101223-1)
    [2010-12-26 16:52] upgraded patch (2.6.1-1 -> 2.6.1-2)
    [2010-12-26 16:52] upgraded perl-xml-parser (2.36-7 -> 2.40-1)
    [2010-12-26 16:52] upgraded pidgin (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:52] upgraded pilot-link (0.12.5-1 -> 0.12.5-2)
    [2010-12-26 16:52] upgraded pkg-config (0.25-2 -> 0.25-3)
    [2010-12-26 16:52] upgraded poppler-data (0.4.3-1 -> 0.4.4-1)
    [2010-12-26 16:52] upgraded poppler (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded poppler-glib (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded postgresql-libs (9.0.1-2 -> 9.0.2-2)
    [2010-12-26 16:52] installed python2-cairo (1.8.10-1)
    [2010-12-26 16:52] upgraded python (3.1.2-2 -> 3.1.3-1)
    [2010-12-26 16:52] upgraded python-chardet (2.0.1-2 -> 2.0.1-3)
    [2010-12-26 16:52] installed python2-numpy (1.5.1-1)
    [2010-12-26 16:52] upgraded qt (4.7.0-4 -> 4.7.1-3)
    [2010-12-26 16:52] upgraded recode (3.6-5 -> 3.6-6)
    [2010-12-26 16:52] upgraded reiserfsprogs (3.6.21-2 -> 3.6.21-3)
    [2010-12-26 16:52] upgraded rpcbind (0.2.0-2 -> 0.2.0-3)
    [2010-12-26 16:52] upgraded smbclient (3.5.5-1 -> 3.5.6-1)
    [2010-12-26 16:52] upgraded syslog-ng (3.1.2-1 -> 3.2.1-1)
    [2010-12-26 16:52] upgraded tar (1.23-3 -> 1.25-1)
    [2010-12-26 16:52] upgraded telepathy-glib (0.12.3-1 -> 0.12.7-1)
    [2010-12-26 16:53] upgraded ttf-dejavu (2.30-2 -> 2.32-2)
    [2010-12-26 16:53] upgraded udisks (1.0.1-5 -> 1.0.2-1)
    [2010-12-26 16:53] upgraded unrar (3.9.10-1 -> 4.0.3-1)
    [2010-12-26 16:53] upgraded vino (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:53] upgraded zvbi (0.2.33-2 -> 0.2.33-3)
    [2010-12-26 16:53] upgraded vlc (1.1.4.1-2 -> 1.1.5-2)
    [2010-12-26 16:53] upgraded warsow-data (0.5-4 -> 0.6-1)
    [2010-12-26 16:53] upgraded warsow (0.5-4 -> 0.6-3)
    [2010-12-26 16:53] upgraded which (2.20-3 -> 2.20-4)
    [2010-12-26 16:53] upgraded whois (5.0.7-1 -> 5.0.10-1)
    [2010-12-26 16:53] upgraded wireless-regdb (2009.11.25-1 -> 2010.11.24-1)
    [2010-12-26 16:53] upgraded xbitmaps (1.1.0-1 -> 1.1.1-1)
    [2010-12-26 16:53] upgraded xfsprogs (3.1.3-1 -> 3.1.4-1)
    [2010-12-26 16:53] upgraded xinetd (2.3.14-5 -> 2.3.14-6)
    [2010-12-26 16:53] upgraded xorg-docs (1.5-1 -> 1.6-1)
    [2010-12-26 16:53] upgraded xorg-iceauth (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] installed xorg-xdpyinfo (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xdriinfo (1.0.4-1)
    [2010-12-26 16:53] installed xorg-xev (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsatoms (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsclients (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xprop (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xvinfo (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xwininfo (1.1.1-1)
    [2010-12-26 16:53] upgraded xorg-utils (7.6-5 -> 7.6-6)
    [2010-12-26 16:53] upgraded xorg-xauth (1.0.4-1 -> 1.0.5-1)
    [2010-12-26 16:53] upgraded xorg-xbacklight (1.1.1-1 -> 1.1.2-1)
    [2010-12-26 16:53] upgraded xorg-xgamma (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xhost (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xinit (1.2.1-1 -> 1.3.0-2)
    [2010-12-26 16:53] upgraded xorg-xinput (1.5.2-1 -> 1.5.3-1)
    [2010-12-26 16:53] upgraded xorg-xkill (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xorg-xrandr (1.3.3-1 -> 1.3.4-1)
    [2010-12-26 16:53] upgraded xorg-xrdb (1.0.6-1 -> 1.0.7-1)
    [2010-12-26 16:53] upgraded xorg-xrefresh (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xset (1.2.0-1 -> 1.2.1-1)
    [2010-12-26 16:53] upgraded xorg-xsetroot (1.0.3-1 -> 1.1.0-1)
    [2010-12-26 16:53] upgraded xorg-xwd (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xwud (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xterm (266-1 -> 267-1)
    [2010-12-26 16:53] upgraded zenity (2.32.0-1 -> 2.32.1-1)
    [2010-12-28 17:36] Running 'pacman -Stu'
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:36] Running 'pacman -Syu'
    [2010-12-28 17:36] synchronizing package lists
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:37] upgraded libpurple (2.7.8-1 -> 2.7.9-1)
    [2010-12-28 17:37] upgraded pidgin (2.7.8-1 -> 2.7.9-1)
    [2010-12-29 23:49] Running 'pacman -S openntp'
    [2010-12-29 23:49] Running 'pacman -S openntpd'
    [2010-12-29 23:49] adding new group: ntp
    [2010-12-29 23:49] adding new user: ntp
    [2010-12-29 23:49] installed openntpd (3.9p1-13)
    [2010-12-31 17:57] Running 'pacman -Syu'
    [2010-12-31 17:57] synchronizing package lists
    [2010-12-31 17:57] starting full system upgrade
    [2010-12-31 18:03] upgraded linux-api-headers (2.6.34-1 -> 2.6.36.2-1)
    [2010-12-31 18:03] Generating locales...
    [2010-12-31 18:03]   en_GB.UTF-8... done
    [2010-12-31 18:03]   en_US.UTF-8... done
    [2010-12-31 18:03]   en_US.ISO-8859-1... done
    [2010-12-31 18:03] Generation complete.
    [2010-12-31 18:03] upgraded glibc (2.12.1-4 -> 2.12.2-1)
    [2010-12-31 18:03] upgraded binutils (2.20.1-4 -> 2.21-2)
    [2010-12-31 18:03] upgraded gcc (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded gcc-libs (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded hyphen (2.7.1-1 -> 2.7.1-2)
    [2010-12-31 18:03] upgraded libwebkit (1.2.5-2 -> 1.2.6-1)
    [2010-12-31 18:03] upgraded nautilus (2.32.2-1 -> 2.32.2.1-1)
    [2010-12-31 18:03] upgraded twisted (10.2.0-1 -> 10.2.0-2)
    [2010-12-31 18:03] upgraded xulrunner (1.9.2.13-2 -> 1.9.2.13-3)
    [2011-01-01 00:31] Running 'pacman -S dhcpcd'
    [2011-01-01 00:35] Running 'pacman -Rns dhcpcd'
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] Running 'pacman -Rns network-manager-applet'
    [2011-01-01 00:36] removed network-manager-applet (0.8.2-2)
    [2011-01-01 00:36] removed mobile-broadband-provider-info (20100510-1)
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] removed networkmanager (0.8.3-0.20101130)
    [2011-01-01 00:36] Running 'pacman -Rns netcfg'
    [2011-01-01 00:36] removed netcfg (2.5.4-1)
    [2011-01-07 19:27] Running 'pacman -Syu'
    [2011-01-07 19:27] synchronizing package lists
    [2011-01-07 19:28] upgraded pacman (3.4.1-1 -> 3.4.2-1)
    [2011-01-07 19:28] Running 'pacman -Syu'
    [2011-01-07 19:28] synchronizing package lists
    [2011-01-07 19:28] starting full system upgrade
    [2011-01-07 19:34] upgraded atkmm (2.22.1-1 -> 2.22.1-2)
    [2011-01-07 19:34] upgraded bluez (4.82-1 -> 4.84-1)
    [2011-01-07 19:34] upgraded cairo (1.10.0-2 -> 1.10.2-1)
    [2011-01-07 19:34] upgraded cloog-ppl (0.15.9-2 -> 0.15.10-2)
    [2011-01-07 19:34] upgraded pam (1.1.1-2 -> 1.1.3-1)
    [2011-01-07 19:34] upgraded coreutils (8.7-1 -> 8.8-1)
    [2011-01-07 19:34] upgraded pciutils (3.1.7-1 -> 3.1.7-2)
    [2011-01-07 19:34] upgraded udev (164-3 -> 165-1)
    [2011-01-07 19:34] upgraded device-mapper (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded cryptsetup (1.1.3-1 -> 1.2.0-1)
    [2011-01-07 19:34] upgraded e2fsprogs (1.41.12-1 -> 1.41.14-1)
    [2011-01-07 19:34] upgraded elfutils (0.149-2 -> 0.150-1)
    [2011-01-07 19:34] upgraded gcc (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gcc-libs (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gnome-media (2.32.0-2 -> 2.32.0-3)
    [2011-01-07 19:34] upgraded groff (1.20.1-4 -> 1.21-1)
    [2011-01-07 19:34] upgraded hunspell (1.2.12-1 -> 1.2.14-1)
    [2011-01-07 19:34] upgraded libcups (1.4.5-2 -> 1.4.6-1)
    [2011-01-07 19:34] upgraded libmysqlclient (5.1.51-1 -> 5.1.54-1)
    [2011-01-07 19:34] upgraded libtool (2.4-1 -> 2.4-2)
    [2011-01-07 19:34] upgraded lvm2 (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded python2 (2.7.1-3 -> 2.7.1-4)
    [2011-01-07 19:34] Updating font cache... done.
    [2011-01-07 19:34] upgraded ttf-freefont (20090104-2 -> 20100919-1)
    [2011-01-08 20:14] Running 'pacman -Sy'
    [2011-01-08 20:14] synchronizing package lists
    [2011-01-08 20:16] Running 'pacman -Sy'
    [2011-01-08 20:16] synchronizing package lists
    [2011-01-08 20:18] Running 'pacman -Sy'
    [2011-01-08 20:18] synchronizing package lists
    [2011-01-08 20:22] Running 'pacman -S kernal26'
    [2011-01-08 20:22] Running 'pacman -S kernel26'
    [2011-01-08 20:25] Running 'pacman -Sn kernel26'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper nvidia'
    [2011-01-08 20:29] >>> Updating module dependencies. Please wait ...
    [2011-01-08 20:29] >>> MKINITCPIO SETUP
    [2011-01-08 20:29] >>> ----------------
    [2011-01-08 20:29] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-08 20:29] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-08 20:29] >>> More information about mkinitcpio setup can be found here:
    [2011-01-08 20:29] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-08 20:29]
    [2011-01-08 20:29] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-08 20:29] ==> Building image "default"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [autodetect]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:29] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-08 20:29] ==> SUCCESS
    [2011-01-08 20:29] ==> Building image "fallback"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:30] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-08 20:30] ==> SUCCESS
    [2011-01-08 20:30] upgraded kernel26 (2.6.36.2-1 -> 2.6.37-1)
    [2011-01-08 20:30] module configuration already contains alias directive
    [2011-01-08 20:30]
    [2011-01-08 20:30] upgraded ndiswrapper (1.56-6 -> 1.56-7)
    [2011-01-08 20:30] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-08 20:30] upgraded nvidia (260.19.29-1 -> 260.19.29-2)
    [2011-01-09 22:54] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -Rns kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns testing/kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns /testing/kernel26 2.6.37-1'
    [2011-01-09 22:58] Running 'pacman -Rns testing/kernel26'
    [2011-01-09 22:58] Running 'pacman -Rns kernel26'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26 2.6.37'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26=2.6.37'
    [2011-01-09 23:01] Running 'pacman -S kernel26'
    [2011-01-09 23:01] Running 'pacman -S kernel26 nvidia ndiswrapper'
    [2011-01-09 23:02] >>> Updating module dependencies. Please wait ...
    [2011-01-09 23:02] >>> MKINITCPIO SETUP
    [2011-01-09 23:02] >>> ----------------
    [2011-01-09 23:02] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-09 23:02] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-09 23:02] >>> More information about mkinitcpio setup can be found here:
    [2011-01-09 23:02] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-09 23:02]
    [2011-01-09 23:02] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-09 23:02] ==> Building image "default"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [autodetect]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:02] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-09 23:02] ==> SUCCESS
    [2011-01-09 23:02] ==> Building image "fallback"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:03] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-09 23:03] ==> SUCCESS
    [2011-01-09 23:03] upgraded kernel26 (2.6.37-1 -> 2.6.36.2-1)
    [2011-01-09 23:03] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-09 23:03] upgraded nvidia (260.19.29-2 -> 260.19.29-1)
    [2011-01-09 23:03] module configuration already contains alias directive
    [2011-01-09 23:03]
    [2011-01-09 23:03] upgraded ndiswrapper (1.56-7 -> 1.56-6)
    I'm also going to run some hardware tests after work just to double check that all my hardware is functioning as it should so that will eliminate another potential cause.
    If downgrading Udev to 164-3 doesn't solve the problem, i will try your version of it Daniel. And if that fails ill try downgrading the kernel to 2.6.35 or something and see if that solves it.
    Sorry for the super long post,
    Thanks again for your help.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 11:51:17)

  • [SOLVED] HDMI audio not functioning

    I'm having trouble getting audio working. My setup is audio through HDMI, but I actually don't have a way to test audio through any other means, so I'm not sure if HDMI has anything to do with the problem.
    My onboard video chipset is ATI Radeon HD 4250, and so I have added "radeon.audio=1" to my GRUB's boot entry, however nothing seemed to change. Where I seem to be stuck is that aplay will not pick up any sound devices:
    $ aplay -l
    aplay: device_list:252: no soundcards found...
    From http://lkubuntu.wordpress.com/2011/07/2 … eshooting/ I was able to yield the following:
    $ lspci -nn | grep '04[80][13]'
    00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
    From some commands in the ALSA page at the wiki:
    $ lsmod | grep '^snd' | column -t
    $
    $ ls -l /dev/snd
    ls: cannot access /dev/snd: No such file or directory
    No idea why almost all of the commands I'm seeing are returning the opposite of what they should. Any ideas?
    Last edited by skoh-fley (2012-03-10 19:05:13)

    Thanks for your replies guys! Using both of your posts' information I was able to get HDMI audio working. Here's what I did:
    # modprobe -v snd-hda-intel
    FATAL: Module snd-hda-intel not found.
    At this point I found a post that suggested reinstalling kernel26:
    # pacman -S kernel26
    warning: linux-3.2.9-1 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): linux-3.2.9-1
    Total Installed Size: 57.45 MiB
    Net Upgrade Size: 0.00 MiB
    And after that all the commands starting working:
    # modprobe -v snd-hda-intel
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/soundcore.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-timer.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-page-alloc.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-pcm.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-hwdep.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-codec.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-intel.ko.gz
    # cat /proc/asound/{cards,devices}
    0 [SB ]: HDA-Intel - HDA ATI SB
    HDA ATI SB at 0xfeb00000 irq 16
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfe710000 irq 19
    2: [ 0- 2]: digital audio capture
    3: [ 0- 1]: digital audio playback
    4: [ 0- 0]: digital audio playback
    5: [ 0- 0]: digital audio capture
    6: [ 0- 0]: hardware dependent
    7: [ 0] : control
    8: [ 1- 3]: digital audio playback
    9: [ 1- 0]: hardware dependent
    10: [ 1] : control
    33: : timer
    Using this information I just followed OrionFyre's instructions and the sound works perfectly! Thanks all!

  • No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

    After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized.  In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
    I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card.  I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
    I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences.  When I reboot as prompted, I’ve still got the same error.
    I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point.  If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
    I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
    Suggestions?  Thanks!
    This question was solved.
    View Solution.

    Hi,
    "If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
    To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager. 
    Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
    After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
    Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
    The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
    the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • [SOLVED]HDMI audio and gnome volume applet issues

    Hi all,
    After setting up Arch without too many problems came the real pain in the ass: HDMI audio over a Asus NVIDIA GeForce EN210....
    Eventually I got everything to work with the help of the ASLA en Pulse wiki pages, but I found the last piece of the puzzle here:
    http://wiki.xbmc.org/index.php?title=HO … ,_or_GT240
    Maybe this is useful for others too.
    The only problem I have now is that the ALSA deamon fails to load. I found this in the boot log file (/var/log/boot):
    Thu Apr 12 13:54:19 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100200" "0x1043" "0x8343"
    Thu Apr 12 13:54:20 2012: Hardware is initialized using a generic method
    Does this mean I don't need the alsa deamon anymore? Sound still works normally after boot but a strange thing is that I can turn up and down the volume with the gnome shell volume applet but the volume of media applications like vlc do not react. Same problem with flash video's like youtube. I do hear the "blip" sound from the applet.
    Does anyone have ideas how to fix this?
    Last edited by Jurry (2012-04-26 23:46:31)

    yeah have the samre problem, adjusting sound in Amarok doesn't change anything.... happened after the last udev update, here is my bootup log :
    Sat Apr 14 17:28:55 2012: :: Adjusting system time and setting kernel timezone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting UDev Daemon    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Triggering UDev uevents    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading User-specified Modules    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Waiting for UDev uevents to be processed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Bringing up loopback interface    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Unlocking encrypted volumes:    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Checking Filesystems    [BUSY] /dev/sda1: clean, 29/40160 files, 24631/160616 blocks
    Sat Apr 14 17:28:55 2012: /dev/sda4: clean, 76872/18530304 files, 16371381/74101820 blocks
    Sat Apr 14 17:28:55 2012:    [DONE]
    Sat Apr 14 17:28:55 2012: :: Remounting Root    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Mounting Local Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Activating Swap    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Configuring Time Zone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Initializing Random Seed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Removing Leftover Files    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Hostname: Nashed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Consoles to UTF-8 mode    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading Keyboard Map: us    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Saving dmesg Log    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: INIT: Entering runlevel: 5
    Sat Apr 14 17:28:55 2012: :: Starting Syslog-NG    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting Network    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting net-profiles    [BKGD]
    Sat Apr 14 17:29:26 2012: :: Mounting Network Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting crond daemon    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Realtek ALC888" "HDA:10ec0888,80860024,00100202" "0x8086" "0x0024"
    Sat Apr 14 17:29:26 2012: Hardware is initialized using a generic method
    Sat Apr 14 17:29:26 2012:    [FAIL]
    Sat Apr 14 17:29:26 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE]
    I hope it helps identify the problem

Maybe you are looking for

  • Ports will not open in ASA 5505

    We are trying to open ports 400 and 9799 on a 5505.I added these into the ACL and ran a port test but they still say closed. Do I have to add anything else other than a ACL statement?           

  • Copy controls from F2 to CR

    Why system allows to change the Sold To Party, Bill To Party in sales document while creating credit memo request with reference to Billing document? For which all business scenarios we require this? How we can control this?

  • ColdFusion 10 - MySQL Communications link failure

    We are migrating some websites onto a cloud infrastructure running Windows 2008 virtual machines.  These websites all run on ColdFusion with MySQL databases.  They currently are running in our CoLo with no problems.  Additionally, they are running on

  • What has been done in version 4.3.3?

    Gentlefolk; I have been prompted for the iPad 4.3.3 update. Anyone know if this is a good update or one I should pass on? What has been done?

  • How to rotate .out ( stdout) log file in weblogic 9.2 (solaris/linux).

    Hi, Is there a way we can rotate .out log file. I have written a shell script which will backup the log file and dump .out file. #!/bin/bash FILE=/opt/bea10/user_projects/domains/wl102xdomain/servers/ManagedServer1/logs/ManagedServer1.log if cp $FILE