[SOLVED] heimdal update breaks samba

:: Starting Samba Server [BUSY]
/usr/sbin/smbd: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/sbin/smbd)
/usr/sbin/nmbd: /usr/lib/libkrb5.so.25: version `HEIMDAL_KRB5_1.0' not found (required by /usr/sbin/nmbd)
[FAIL]
all there is to it, downgrading to core/extra version of heimdal + dependees fixes it
does samba need a rebuild?
Last edited by eldragon (2009-11-26 12:37:53)

Allan wrote:samba/smbclient is now rebuilt so wait for the update to fix it soon.
just upgraded, it works, but is there a reason for the 1minute delay between the restart command and the [done] status?
$ time sudo /etc/rc.d/samba restart
:: Stopping Samba Server [DONE]
:: Starting Samba Server [DONE]
real 0m43.304s
user 0m0.130s
sys 0m0.077s
EDIT
it appears to be related to samba trying to connect to my cups server (even if i dont have any printers added through samba).
will debug later
Last edited by eldragon (2009-11-25 17:33:02)

Similar Messages

[SOLVED] libva update breaks mpd

Today's libva update to 1.0.4 makes mpd refuse to start, printing "error while loading shared libraries: libva-0.31.0.6.so.1" instead.
edit: Downgrade to 0.31.1_p3-1 doesn't help, but with 0.31.0_p13-2 mpd starts just fine.
Last edited by misc (2010-08-07 19:39:28)

wonder wrote:mpd doesn't link to libva. ffmpeg does and that's your starting point
That's it, thanks. I have ffmpeg-svn installed; updating that fixed the problem.

New kernel package 2.6.7 breaks samba package -- solution

The new 2.6.7 kernel package from current breaks samba when it tries to load openldap.
The following will fix it :
cd /usr/lib
ln -s libldap-2.2.so.7.0.6 libldap.so.2
The symptom you'll see is that the samba service fails to start, and you'll see a shared library load error on boot.

leejpar wrote:Thanks, works fine now!
And as of now there is an update for openldap which fixes the issue also. There was probably only a few hours where this could have happened.
So no one else use my fix
If you did, you either need to remove the link or use pacman -f to overwrite the link you made.

ITunes 11.3.1 update breaks iTunes on my mac.

iTunes 11.3.1 update breaks iTunes on my mac. iTunes window will not display following update.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

What are the things 10.6.8 update break?

After the 10.6.8 update I am having so many issues,
first, the %100 cpu usage of dock, disabled parallels, and now it is ok,
then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out,
if I persist, it logs me in after a couple of tries, but each time a few of my applications are missing at random, and the environment is very very unstable, sometimes I see no desktop background, sometimes I start firefox and I am logged out again.
I've seen some people suggesting removal of login items to resolve a similar but not the same issue, so I'm inclined to think overall, there is an issue with some applications which 10.6.8 update breaks.
For starters my login items are:
GrowlHelper
Geektool
EyeTv Helper
Canon IJ Network scanner
ituneshelper
Magicprefs
Sophosuiserver
Does anyone have any problems with any of these?
I only verified the parallels desktop 6 issue up to now.
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f15

Actually it is not-so-permitted to remove sophos for this machine, but I did it anyhow. No problem so far, but lack of evidence is not evidence of being lack of something so I am not adding it to the list yet

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

Mac OSX 10.4.8 Update Breaks Raid Striping -- System will no longer boot

Hi,
I'm a newbie from the PC world with a Mac Pro. For the last 8 hours I've been trying to get a Raid-0 configuration to work with no success.
The Raid array constructs ok and the system boots. Once that's done the Software Update screen arrives and I would select install all... then the machine would not boot. I get a Grey Shade like affect and the message to power off and restart. Powering off does nothing.
So I started again for the Nth time and added each Software Update individually. All loaded and rebooted successfully until the 10.4.8 Update.
As soon as that loads, installs and restarts the machine will not boot.
I called Apple's Tech Support and they told me they do NOT support RAID on this machine. I said what are you talking about. They put me on hold talked to a supervisor and came back with the same story. I just don't get it...
So anyone have any insight and advice on why the update breaks my Raid-0? What can I do to get over the problem (I'd like to have the RAID...)?
Thanks for the assistance.
Mac Pro Mac OS X (10.4.8)

Yes, you needed an emergency boot drive anyway to repair your RAID boot drive. Just use the same one in addition to a working clone or backup of your regular system.
Apple made it easy to install or update security updates and system updates from an alternate drive (but you will have to use the stand-alone (combo preferably) updaters instead - which many use already as normal part of upgrades for years now (they seem more useful and reliable).
My preference is a dedicated boot drive with OS and apps and minimal home directory - no media files - and fast, like 10K Raptor. I use RAID for my home directory so it isn't on the boot drive for years to improve performance and keep the OS separate. Never a problem and nice mix.

The latest Java update breaks some vital applications

The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
I have checked the "do not ask again until next relesse" box every single time. Worthless.
Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
Ideas?

We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
The wrong look & feel is causing the following problems:
- Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
- Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?
I have a 2.4GHz Intel Core 2 duo MacMini from 2010, and I just updated to the latest OSX (10.9.4 (13E28)) and now bluetooth audio is broken.
I can pair my device (LG Tone+) to the mac, but no audio will play though it. I've rebooted the machine, reconnected the device after the update, restarted the browser, all with no results.
Typically, when I connect to the system I will get audio acknowledgements through the headset, "Power On" "Battery High" "Connected"
I still get those audio queues through the device. However when I open up a video on YouTube, or attempt to stream music on Spotify...nothing happens.
I've plugged wired headphones into the system and that works just fine. When I connect my Bluetooth headset, the audio to the wired headphones disconnects, so it seems like everything is behaving normally, except that no audio plays through the bluetooth headset.
Any ideas on where to go from here would be greatly appreciated. So, what do we think?

Try resetting the SMC.
Barry

(solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer

(solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer
Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |

Hi,
Glad to see your problem resolved, Hope your experience is helpful with others.
Roger Lu
TechNet Community Support

SOLVED---WARNING!!! Latest updates break Konqueror!

After my daily update on my AMD64 box, I get this message (translated) when I try to access the net with Konqueror:
An error happened loading "http://url of the page"
Could not start following process:Not able to make io-slave.
Klauncher answered: "Error loading kio-http"
How do I repair this?
Added comment:(00.42 h local time): It is repeatable:my second AMD64 machine does identically the same thing8
Last edited by mianka (2007-09-30 11:38:18)

Do you use testing?
The heimdal version in testing does break kio_http, but by creating symlinks you can get around that.
Do a ldd /opt/kde/libs/kde3/kio_http.so | grep not and see which libraries are missing. Search for these libraries in /usr/lib (e.g. libgssapi.so) and create a symlink from e.g. libgssapi.so.2 to libgssapi.so.1 . This is only a dirty workaround, but it works until the related kde packages are rebuilt against the new heimdal version.
Edit: I experienced the same with kdemod.
Last edited by wuischke (2007-09-30 10:47:02)

[SOLVED] Update to Samba 4 completely broke functionality of Samba

I have a computer running Arch 64bit, from which I share media files to my girlfriend's Windows 7 laptop, and to my own Windows 8 tablet.
Until an hour or so, I was running Samba 3.6.13 which happily worked most of the time (with occasional breaks that were easily quelled). I upgraded to Samba 4 to realize (much to my horror, just before we were going to watch a movie) that the configuration is no longer valid and whenever someone tries to connect to the server... it crashes.
I tried to delete the configuration file (leaving only the shares, along with the example configuration from the Samba4 wiki), but the result is the same. I have no need for AD DC, or so. I just want a working share that Windows can read without a hassle, so we can watch movies and so in the living room.
Last time I tried to start it using systemctl start smbd.service it failed and the error log implied that it fails to fetch the printers list (I have no printers at home...)
Is there any advice on the situation? Here is my smb.conf file, although it's pretty dull right now.
[global]
workgroup = WORKGROUP
security = ADS
realm = Home
encrypt passwords = yes
idmap config *:backend = tdb
idmap config *:range = 70001-80000
idmap config SHORTDOMAINNAME:backend = ad
idmap config SHORTDOMAINNAME:schema_mode = rfc2307
idmap config SHORTDOMAINNAME:range = 500-40000
winbind nss info = rfc2307
winbind trusted domains only = no
winbind use default domain = yes
winbind enum users = yes
winbind enum groups = yes
[Videos]
path = /home/****/Videos
comment = Videos
valid users = nobody
read only = yes
available = yes
browseable = yes
writable = no
guest ok = yes
printable = no
locking = no
strict locking = no
[Music]
path =/home/****/Music
comment = Music
valid users = nobody
read only = yes
available = yes
browseable = yes
writable = no
guest ok = yes
printable = no
locking = no
strict locking = no
Last edited by Asaf K. (2013-04-16 09:33:18)

Beelzebud wrote:For an upgrade this big, there should be some documentation ready before it happens...
Exactly, the wiki has nothing about basic shares except for:
[test]
path = /data/test
comment = Test Share
read only = no
but using that template in my virtual machine does nothing!
Inxsible wrote:
t0m5k1 wrote:EDIT:
After reading their wiki I seriously think Arch Dev's should keep Samba3 in the repo's alongside Samba4 I say this because it appears Samba4 is more for those who require AD/DC functionality for a more enterprise scenario.
Are you volunteering yourself to maintain that package? Have you considered that it might break other dependency chains if its in the same repo?
Point is, its easy to say "you need to do this" -- its quite another to actually do it
Where do I say "you need to do this"?? I do not as I am simply sharing my opinion on what seems to be a bit of a major thing! Sorry if I offended you that was not my intention at all
Perhaps you thought I meant Arch linux wiki when I said "their wiki" as I was actually referring to Samba!
However I do consider it is possible that keeping Samba 3 in the repo's could have knock on effect but is it not obvious that basic file sharing has been broken by this upgrade!
And no unfortunately I do not have the required skills to volunteer to maintain this neither do I have the time as well.
Last edited by t0m5k1 (2013-04-12 18:36:15)

Gnupg update breaks key database [SOLVED]

Hi all,
I upgraded gnupg from 2.0.26-1 to 2.1.0-4, which also removed dirmngr:
[2014-11-25 20:18] [PACMAN] Running 'pacman -Syu'
[2014-11-25 20:18] [PACMAN] synchronizing package lists
[2014-11-25 20:18] [PACMAN] starting full system upgrade
[2014-11-25 20:19] [PACMAN] removed dirmngr (1.1.1-3)
[2014-11-25 20:19] [PACMAN] upgraded gnupg (2.0.26-1 -> 2.1.0-4)
Since then, engimail complains, if I understand correctly, about not being able to migrate my gpg-keys:
Error - encryption command failed
/usr/bin/gpg --charset utf-8 --display-charset utf-8 --batch --no-tty --status-fd 2 --with-fingerprint --fixed-list-mode --with-colons --list-secret-keys
gpg: starting migration from earlier GnuPG versions
gpg: error: GnuPG agent version "2.0.26" is too old.
gpg: Please make sure that a recent gpg-agent is running.
gpg: (restarting the user session may achieve this.)
gpg: migration aborted
Reverting to 2.0.26 with dirmngr solves the problem, but I feel a piece of security software like gpg should probably be up-to-date.
Reinstalling enigmail (it's from the AUR, after all, and got upgraded) didn't help, but the message seems to me to be more about gpg, anyway.
I should also mention that I upgrade my system pretty regularly (usually twice a day), and so didn't really expect a version jump to be too large.
I'd be grateful for any help with this.
Last edited by AndyD (2014-11-26 15:31:43)

Found it, there was a file that was being created in /dev called null. I think it is to be related to the gnupg update, and apparently I did need proc, sys, and dev mounted on my PXE client roots.

[Solved.]Possible GUI/Video Driver update break?

Yesterday, I did a Update/Upgrade like usual and everything seemed fine. After a reboot, GUI (XFCE) seemed slightly broken.
By "slightly" I mean, only one virtual desktop was available instead of the four I had set, and compositing wasn't working,
leading me to believe that something driver related was changed. I installed NVIDIA and NVIDIA-UTILS over my nouveau driver as stated in wiki (my card is Geforce 6200 agp). I was also in the process of tweaking my .xinitrc on unrelated problem and tried some settings with that but no help. I changed .xinitrc back to the way it was, but now I am stuck with SLiM login prompt that doesn't allow login, and TTY's seem to frozen on the output from loading the OS, not allowing me to fix from terminal.
Question 1: are the two problems related?
Question 2: was there recently a nouveau breaking update recently?
any ideas or directions on things to try are greatly appreciated, I am currently at work and unable to get to the arch
machine, so I am unable to post any output, just looking for some insight.
Last edited by SORE-LOSER (2011-11-29 02:46:39)

Reformatted. Thanks for the help everyone.

[SOLVED] mkinitcpio-0.7-1 update breaks plymouth

Today's update of mkinitcpio-0.7-1 fixes an issue I and others were having with some module errors at the beginning of boot, but has broken plymouth. It only becomes apparent when I first attempt to use mkinitcpio to rebuild my images, which calls the plymouth hook in. It barks about an install function being deprecated in '/lib/initcpio/install/plymouth', that the function should be renamed to 'build' and also complains about the command 'add_device' not being found. If I change the 'install' function name to 'build' that error disappears, but the other error is still present. I tried replacing 'add_device' with 'mknod', as suggested in another post, but this does not work either. Long and short of it, there is currently no way with mkinitcpio to have plymouth get built into the image, at least AFAIK. Here is the top stanza of the '/lib/initcpio/install/plymouth' file which is giving the issue:
# vim: set ft=sh:
install() {
add_device /dev/fb0 c 29 0
add_dir /dev/pts
add_dir /usr/share/plymouth/themes
Last edited by sidneyk (2011-07-07 05:43:19)

sidneyk wrote:
karol wrote:http://mailman.archlinux.org/pipermail/ … 20824.html
I wouldn't call it a workaround - it's the new way.
I was calling it a 'workaround' in the sense that the fix hasn't been incorporated yet into the plymouth-git maintainer's package in the AUR.
Ah, OK.
Thank you for posting the info on the package's page in the AUR.
I think you can mark this thread as solved.

[SOLVED] heimdal update breaks samba

Similar Messages

Maybe you are looking for