SOLVED : HELP Desperately seeking 1.50.6 firmware for my WRT54GS V6.

Hi everybody,
No firmware on this router works for access restrictions but 1.50.6. I had it from the beginning but unfortunately upgraded to newer release and Linksys seems unable to retrieve it (!!!).
The problem : if I want to LOCK some (game) ports on a schedule, I have to AUTHORISE access EXCEPT for those ports, but then any access to the internet is impossible out of the authorised schedule.
More, 2 AUTHORISATIONS lock mutually : if you AUTHORISE Monday and Friday using 2 DIFFERENT rules, any access becomes impossible 24/24 and 7/7, even on Mondays and Fridays! Unbelievable.
Could anyone find this 1.50.6 firmware?
I tried all other releases available on Linksys sites or sent by the customer service (1.50.7, 1.50.9 and 1.52.0). None of them works and they even have some other minor bugs which are not in 1.50.6).
Thanks for your help. I would not have anymore to enable / disable some rules manually every day to prevent the kids spending all their time playing network games (mainly World of Warcraft).
Message Edited by jccarrier on 05-06-200710:11 PM

Here is the link for 1.50.6 firmware. It is in German which is not a problem for me. I couldn't find it in French or English. It is proposed for V6 only but it is compatible with V5.1. I use it on a V5.1 now. But it includes some bugs in DHCP (2 computers can be assigned the same IP address), so I don't use DHCP. Linksys' hotline told me they will work on a new release that will work for both access control and DHCP.
Hope this can help.
http://www-de.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=DE%2FLayout&cid=1129930115...

Similar Messages

Firmware for a WRT54G V5

When I try to update the firmware for my WRT54G V5 it is not a .bin file. It is an EFW file. Any suggestions??

The firmware file is a Zip file ..... you need to extract the file using Unzip software .....
It will extract few more files ...... look for .bin file now ..... upgrade the firmware using the same ....

How can I get the latest firmware for a WRT54GS 7.2? I ac...

How can I get the latest firmware for a WRT54GS 7.2? I accidentally downgraded to 7.2.05, and it came with 7.2.06.

Thank you! I tried that link, it came as a page not found on the Linksys site. I went to the UK version of the Linksys site, and they don't list the 7.2 version of the router. They only go up to 6.0.

Downgrading Firmware for the WRT54G... I can't do it...

Hello, I am using the WRT54G wireless router, which currently has the 8.0.01 firmware. That's what it came with when i bought it.
I am trying to downgrade the firmware to either 3.01.3 or 3.03.6. I want to downgrade to one of those because Xbox said that those two are confirmed to be Xbox LIVE compatible.
I have been having trouble connecting to games with other people online with this router/firmware.
I downloaded the firmware "WRT54GV3.0_3.03.6_US_code" and "WRT54GV3.0_3.01.3_US_code," but when I try to install them, it says "invalid code pattern." like three times overlapping eachother above the progess bar.
It says that error because that firmware is for the WRT54G V3.0 and I guess mine is the WRT54G V8.0? I don't really know.. Is there anyone else with this router that has Xbox LIVE?
What can I do?
Thanks for all help in advance,
Christian
Message Edited by saxon2309 on 08-16-2007 05:37 PM

Your router comes in several versions. Each version has different hardware in it, and because of this, each version needs its own firmware. You can only use the firmware that is posted for your version of the router. I assume you have version 8 of the router, if so, you cannot use the firmware written for version 3.
If the router's version is not clearly stated on its tag (usually on bottom of router), then go to Wikipedia.org and search for "WRT54G", then, using your router's serial number, you can find out which version of the router you have.

How to install firmware for the WRT54G

I have downloaded the newest firmware for this router, but the file is a .bin. There is no .cue, .iso or other file associated with it. How do I open this file, or burn it?
I tried creating a .cue file using a .txt text editor:
FILE "WRT54Gv5v6_v1.02.2_fw.bin" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00,
and renamed it WRT54Gv5v6_v1.02.2_fw.cue
Roxio's Creator Classic will burn it to a CD, but when I try to load it by inserting the disk, the disk is blank - but shown as 100% used in raw format.
Any suggestions? Why would Linksys provide this firmware in this truly complicated format?

You point your browser at http://192.168.1.1/ This is the LAN IP address of the router inside your LAN. You can connect to this address when you are connected to the router. You don't need internet for that.
The router came with a firmware preinstalled. Without the firmware the router is just a piece of junk. The configuration program on the CD only sends settings to the working and operating router, i.e. a router which is running its firmware. You can update the firmware by uploading a new firmware file to the router. But there was no firmware on the CD nor was it installed anywhere during initial setup. The router came with a firmware otherwise you could not use it.
Just go to http://192.168.1.1/ and click on the Administration tab. The firmware upgrade function is somewhere on a subtab. You'll see a browse button with which you select the firmware file you downloaded before. Once you press the Upgrade button (please only do it if you really want to upgrade the firmware!) the browser sends the selected firmware file to the router where it will be installed after the router reboots itself.
There is no point installing it from a CD as you only have to transfer the file to the router. Burning it to a CD only to load it from the CD does not make a different. As you have mentioned it does not make a difference where the firmware file is. Only as you have to download it anyway and then just transfer it to the router there is no point in burning it on a CD. You upload it to the router and that's it. Afterwards you delete the file because you don't need it anymore and you can download the latest firmware from linksys.
When you write "DSL, cable and even VoIP modems" upgrading using any OS, did you ever do it? How exactly did you do it? Are you sure there is an updater for MacOS? Linux? Solaris? ... I think most modems will do it in a similar fashion using a browser upload.
I don't understand what the problem is with this kind of firmware upgrade for you. It works very well and is often used. Many devices have browser interfaces nowadays and thus it is only natural you do the firmware upgrades the same way. The router can be upgraded using tftp as well. However, there are a few pitfalls with this method and often you'll need a command line prompt to run it. But these are the only possibilities to send the firmware file to the router and somehow you have to get it there.
Message Edited by gv on 09-07-2007 03:01 PM

Urgent!Seeking a firmware for StorageTek SL24 Tape Autoloader !

Who can help me to download the latest firmware for StorageTek SL24 Tape Autoloader and then sent to my mailbox!Grateful ! E-mail address: <removed by moderator> thank you !
Edited by: ZB Oracle on 2012-12-27 下午11:18
Edited by: rukbat on Dec 28, 2012 5:21 AM

ZB Oracle wrote:
Who can help me to download the latest firmware for StorageTek SL24 Tape Autoloader and then sent to my mailbox!Grateful ! E-mail address: <removed by moderator> thank you !
Edited by: ZB Oracle on 2012-12-27 下午11:18
Moderator Action:
Post locked.
You are asking for someone with MOS credentials to violate the terms of that MOS agreement.
Firmware updates are only available to Oracle customers.
You become an Oracle customer when you have paid for the privilege to get access to such resources from the company by buying a support contract. You are NOT a customer just because you have some of the software and use it.
If you need support, then go pay for the right to get support.

Can NOT download v4.21.1 Firmware for WRT54G v4

There is something wrong with the Linksys download site.
Can someone confirm this by trying to download that specific firmware?
http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1115416835852&...
When trying to download the latest firmware for my WRT54G v4, I get nothing but an empty .zip folder (0 bytes).
I also get some sort of server error while attempting to download the "version info".
I have tried three different browsers to be sure.
Hmmm....I just successfully 'test' downloaded other firmware versions, so I know it's got to be the link for this particular firmware I need.
When will this be fixed?
Or, where else can I get Linksys v 4.21.1 firmware for my WRT54G v4?
Thanks
Message Edited by thenut on 02-06-200709:06 AM

Download the firmware file for the WRT54Gv3. v3 and v4 are compatible. v5 and later use a different kernel. If you select v3 in the downloads you download the file "WRT54GV4.0_4.21.1_US_code.zip" which is the same filename you would get for the v4. I guess it is just a configuration error on the server which breaks the links for the v4...

Firmware for WRT54G ver. 7

I am not sure that is it my computer have a problem but i could not find the firmware for version 7 ... there is only firmware for 1,1.1,2,2.2,3,3.1,4,5,6,8 no 7 ...
So anyone can kindly tell me where can i get the firmware for version 7 ?

well...you need to go to www.linksys.com/uk ... the firmware for the wrt54g v7 should be in that list ..

Help needed on running a downloaded firmware file

Hello,
I recently downloaded new firmware to my computer for my WRT54GS Ver 6 wireless router. It is a .bin file (whatever that is). I cannot get it to open. Can anyone help me? Thanks and Happy New Year.
Jon
Solved!
Go to Solution.

Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file that you have downloaded and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
After the Upgrade Press and hold the reset button for 30 seconds...
Then, unplug the power cable while holding down the reset button for another 30 Seconds...
Plug the power cable back in, and keep holding down the reset button for another 30 Seconds...
Release the reset button...Now re-configure your router...

Help Desperately Needed to restore Photoshop 10 catalog to Windows 8 computer and PSE 11

I am trying to backup my Photoshop Elements 10 catalog from my old computer running Windows 7 and restore to my new computer running Windows 8 and Photoshop Elements 11. I reconnected missing files, optimized and repaired the catalog, then repaired and re-indexed visual similarity date. I backed up to the hard drive on the old computer, copied the files to the external hard drive, copies the files from the external hard drive to the desktop of the new computer. From there I opened PSE 11 organizer and tried to restore. When the restore is almost complete I get the following error: "error encountered while restoring. It's recommended that you contact the disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again.". I also had disabled the virus protection on both computers. I have contacted the external hard drive manufacturer and they are confident the problem is not with the external hard drive. I have spent countless hours on chat with Adobe Technical Chat. I have done everything that has been suggested to fix the problem and I still get the same error message. They referred me to their 800 number for paid technical support and I was on hold for a total of 4 1/2 hours and after being trransferred several times no one came back on the line to help. I have an open case with them and they still have not returned my calls. I even tried using the same backup catalog file and restored to another PC running Windows 7 (and Elements 10) and it worked. Why can't I restore the catalog to Windows 8? Any help is greatly appreciated!

Please refer to following link:-
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catal og-photoshop.html

Help!!!Cannot update firmware N95 v20 to v21

Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....

28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....
28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....

Need help with installing old version of firmware

I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
I will try downgrading using the link you provided. Thanks very much.

Firmware for Ipod 20 GB....help please

Where can I find firmware for my Ipod 20GB? When I go on to apple.com all I find is the Ipod Shuffle firmware information. My Ipod is frozen and will not do anything. Please help. Thank!

Yes under singapore downloads page. Firmware version is .00.02 It is kinda of surprising the firmware has not undergo any updates since the version that came bundled with the player in the box. Zen firmware is less buggy than others?
Make me wonder are all firmware of all models written by the same engineer team? If it is not, I guess I know why certain model firmware always have problems and updates whereas some remain unchanged since launch :smileytongue:

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

Bob
Thank you for your kind consideration of my problem. Up until the software started to print blank pages the preview pane always showed the selected print within the selected layout. Something has changed. Lightroom will print to the JPEG file but only a blank page on the Epson 2880. I've been in contact with Epson support and an IT tech and they tell me the problem is with Lightroom. I'm at my wits end and thinking of upgrading but the glitch may carry over. Uninstalling and reinstalling and deleting the preferences file did nothing to rectify the situation.
Thanks again!
David

Help very Need WRT 54G V7, firmware 7.00.6

Help very Need WRT 54G V7, firmware 7.00.6
I updated to 7.00.8 and now device work not stable
WhenI have 7.00.6 firmware it work not bad.

Well its not possible to restore the earlier firmware back on your Router. Since you have already upgraded the firmware on your Router, Have you resetted your Router and re-configured all the settings on it again? Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

SOLVED : HELP Desperately seeking 1.50.6 firmware for my WRT54GS V6.

Similar Messages

Maybe you are looking for