[SOLVED] Help on installing urxvt

I am fooling around with the i3 window manager, but the Mod1-enter doesn't work. Based on the config file it is calling /usr/bin/urxvt, which doesn't exist on my machine and I cannot find out how to install this library (pacman -S urxvt doesn't work). If you google urxvt all you get is articles on rxvt.
** update I set it to xterm instead.
Thanks
Last edited by iso (2010-08-02 03:45:37)

Please append [SOLVED] to the title of this thread if you're done with it. You can do so by editing the opening post.

Similar Messages

[SOLVED] Help me install Arch on my W540

Hi guys,
I'm trying to install ArchLinux on my Lenovo W540. I've installed Arch on so many other Notebooks and desktop computers before but they all had a non UEFI Bios. This one is a bit tricky.
I dd'ed the arch iso on my usb and booted it up.
The result is a freeze during booting from the usb: http://i.imgur.com/hUMT36E.jpg
Can anyone help me install Arch on my W540? Or tell me what the problem is?
Thanks in advance
--lmnsqshr
Last edited by lmnsqshr (2014-10-29 20:37:33)

Ok, I got a solution but this will probably piss off some people googling for "how to install Arch Linux on Lenovo W540" because it's not a reproducable solution (sorry).
TL;DR: USB flash drive was corrupt.
After booting from the USB, I changed the boot parameters of the x86_64 entry and added a "nomodeset". This would prevent the graphical drivers from loading, because the problem was apparantly with the nouveau-module.
The live system booted and I got to the point where I partitioned my SSD. The command "mkfs.ext4 /dev/sda1" got me some I/O errors so I thought the USB flash drive might be corrupted (it was pretty old).
I dd'ed the arch iso on a new USB flash drive which somehow could load the nouveau module without any problems. And now I'm running my beloved Arch on my W540.
/EDIT: I just remembered that I also disabled the integrated card reader in the BIOS.
Last edited by lmnsqshr (2014-10-29 20:49:01)

[SOLVED] Help Required Installing True Type Fonts

I am currently using Xfce4.8 and have installed xorg-fonts-100dpi xorg-fonts-75dpi and type 1 fonts.
Now the fonts in xfce are starting to look good, menu fonts on firefox look good but many webpages
are using ugly non aliased fonts.
I would like to include the ttf-ms-fonts and have found the folowing wiki page:
http://aur.archlinux.org/packages.php?ID=13030
I have installed the dependemcies
fontconfig xorg-font-utils xorg-fonts-encodings
and also just one font:
http://downloads.sourceforge.net/corefonts/verdan32.exe
I am unsure how to install the verdana font so any help appreciated, thanks in advance.
Last edited by hal8000 (2011-05-21 16:05:49)

Thanks Guys, I am now having trouble with makepkg
I have unzipp ttf-ms-fonts
[anc@orac ttf-ms-fonts]$ ls
LICENSE PKGBUILD ttf-ms-fonts.install
When I run makepkg this error appears:
[anc@orac ttf-ms-fonts]$ makepkg
==> ERROR: Fakeroot must be installed if using the 'fakeroot' option
in the BUILDENV array in /etc/makepkg.conf.
So I check contents of /etc/makepkg.conf
--snip--
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
BUILDENV=(fakeroot !distcc color !ccache check)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
This looks as though option fakeroot is enabled, is there anything else I need to change?

I accidentally uninstalled my WLAN on my notebook and need help re-installing it.

I have a HP Pavilion dv9925nr and need help re-installing the WLAN. Please help!

Hello,
This unit came with VIsta and here is a driver for this unit.
its either going to be the Broadcom
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66350-1&cc=us&dlc=en&lc=en&...=
Or intel driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66349-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

Firefox user when i try to access my gmail,orkut and yahoomail i get this error message Error code: sec_error_expired_certificate All the other sites are working fine please help Plugins installed:

Firefox user
when i try to access my gmail,orkut and yahoomail i get this error message
Error code: sec_error_expired_certificate
All the other sites are working fine
please help
Plugins installed:
== URL of affected sites ==
http://

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

Satellite A200-13O: Help in installing Vista Ultimate from Basic

I need help in installing Windows Vista Ultimate in my A200-13O.
My current operating system is Windows Vista Basic and I want to upgrade it to Windows Vista Ultimate.
Based on the driver download section I need the following drivers to be installed.
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221
I have already downloaded most of them but I can't find some like [2] Intel ICH7M Chipset Utility, [11] Intel Kedron Wireless LAN Driver, [23] TOSHIBA Speech System. Also some of the drivers are not installing properly.
Can you please help me out.

The chipset driver you can get on the Intel webiste
www.intel.com
But I think the driver could also be in the display driver because its the same chip.
The WLAN driver I have found on the Toshiba website so download and install it.
The speech system could be integrated in the sound driver.
But download and install all drivers and the system will work.

Need help in installing a SATA hard drive with 865pe NEO2

Hello there
I need a help in installing a Sata hard drive ,it is WD 250 GB , my motherboard is 865PE Noe2 , the bios is the latest one
already I got another old hard drive ,not a Sata ,a regular IDE one installed as a master hard drive
I want to install the sata hd as a slave for the IDE hd for now to transfer the files and documents
I already physically installed the Sata hard drive yet the problem is that it was listed in the bios , I followed some of the steps here in the forum mentioned but all what I got is I found it listed as the fourth IDE master , not as the primary IDE slave
in Windows Xp Sp2 it is not listed of course in the windows explorer , but it is there in the device manager
look I am very confused and I tried most of the combinations in the ide configuration in BIOS
what should I do coz I am feeling so bad and stupid ,you can consider me a n00b in this hard drive thing

1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

Does any update help to install and run myFaces components?

Hi.
I have JSC trial. And didn't make update.
I can't install myFaces component library. Why?
Does any update help to install and run myFaces components, and other component library?
Thanks.

Hi,
The following thread could be of help for you:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
Cheers :-)
Creator Team

I need help to install Toolkit CreateJS for Flash CS6.

Hi,
I need help in installing CreateJS for Flash CS6. I had downloaded the Toolkit CreateJS from here: http://www.adobe.com/go/downloadcreatejs and here: http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit- createjs.html. When I attempted to install the extension using Adobe Extension Manager, the installation files did not have the required .zxp or .mxp files. It only had a file with a .mxi extension. Please advise. Thanks.

Why installing IIS o_O?
For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
For configuring both of them just take a look at the documentations on http://otn.oracle.com
regards
christian

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.

Mani Dinesh wrote:
Can somebody help me install IOS 6.1.3 back to my iPhone 4.
Downgrading is not supported by Apple.
Mani Dinesh wrote:
...every app gives a break for 4-5 seconds to open up. ...
See this discussion...
https://discussions.apple.com/message/23731048#23731048

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

PHOTOSHOP ELEMENTS 6 'HELP' NOT INSTALLED

I have PSE 6 installed from the Adobe disk on a Mac which uses OS10.5.8.
When I try to access the 'PSE 6 HELP' component from the toolbar I see the following - "Could not find the Adobe Help Application.You may need to re-install the application and the Help component." Why is Help not installed from the installation disk?
Is re-installation is the only solution? And if so, do I have to un-install first, or will re-installation print over the existing version? If it requires un-install, how do I do this?
Thanks in advance

Don't worry. Most products now have on-line help.
http://help.adobe.com/en_US/PhotoshopElements/6.0_Mac/

TS3212 im trying to reinstall but will not allow, due to an error 7, itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Please help me install Pattern Maker?

Hi,
At this url:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4687&fileID=4377
I am trying to download the plugin:
CS5_Optional_PlugIns_Installer.dmg
The files included are:
CS5 Optional Extension Plug-Ins.mxp
and
CS5 Optional Plugins.mxp
When I attempt to install either of these two files, I get the following error message:
I’m attempting to place the installs into the Applications> Photoshop CS5 > Plugins > Optional Plugins
I'm on a Mac OS 10.6.5
What am I doing wrong?
Thank you so much in advance.
Linda

Hi Linda,
Sorry if I confused, but I just want to make sure that you don't have all the Optional Extensions installed and enabled (as fallout from trying to get Pattern Maker working). There are two .mxp files and you mentioned trying to install both of them. I haven't seen the actual error you get, so to be safe, I'm suggesting that you make sure to disable all the Optional Extensions (and likely all the optional plug-ins that you don't need too). The installers are/were all or nothing (I'm not sure if the installer .mxp for Optional Extensions has been removed yet).
The quickest way to uninstall is using the CS5 Service Manager application (IF it is working correctly). The quickest way to tell if they are installed is probably to look in this folder: Adobe Photoshop CS5/Plug-Ins/Extensions.
There should only be 5 there by default: Enable Async IO, FastCore, MMXCore, MultiProcessor Support, and ScriptingSupport.
Let me know if you still have questions,
regards,
steve
Linda1234567 wrote:
Okay, now I have no idea what you're talking about! pattern maker is working. Can't I just leave well enough alone?:-)Linda
Date: Wed, 29 Dec 2010 17:37:09 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop Macintosh Please help me install Pattern Maker?
Hi Linda,
If you installed the Optional Extensions Plug-Ins.mxp you'll want to uninstall all of them (or disable them and only enable individual ones that are needed). To uninstall, use the CS5 Extension Manager. To disable them, individually rename each with a tilde(~) as the first character.
regards,
steve
>

[SOLVED] Help on installing urxvt

Similar Messages

Maybe you are looking for