[SOLVED] Help required, unable to set a wallpaper.

Good day, first of all.
Tough new to Arch, i have /some/ experience with gnu/linux, and this is beyond me. I am running arch x86_64 with gnome, loving it. But if i choose an image as a wallpaper i get nothing but the color. Not even the gnome basic images would work, just the colors. Been around looking for a solution for about 3 hours, i appeal to your kindness.
Any ideas?
thanks in advance.
Last edited by evildrake (2009-07-24 16:37:02)

evildrake,
I am having the same problem in kde4, just started after recent update as of today.
May be they are related. Did you just update?
edit:
I found that it was the gtk2 update that has somehow messed things up i believe.
Some message about libjpeg error
edit:
here is the list of updates, one of them broke my desktop:
extra/akonadi version 1.1.2 release 1 -> 2
extra/gegl version 0.0.22 release 1 -> 2
extra/ghostscript version 8.64 release 5 -> 6
extra/gimp version 2.6.6 release 1 -> 2
extra/imlib2 version 1.4.2 release 2 -> 3
extra/jasper version 1.900.1 release 2 -> 3
extra/lcms version 1.18 release 1 -> 2
extra/libdjvu version 3.5.22 release 1 -> 2
extra/libgphoto2 version 2.4.6 release 1 -> 2
extra/libmng version 1.0.10 release 1 -> 2
extra/libtiff version 3.8.2 release 4 -> 5
extra/libwmf version 0.2.8.4 release 4 -> 5
extra/poppler version 0.10.7 release 1 -> 2
extra/sane version 1.0.20 release 2 -> 3
extra/xulrunner version 1.9.1 release 1 -> 2
==> Software upgrade (new version) :
core/sudo 1.7.1-2 -> 1.7.2-1
extra/boost 1.37.0-1 -> 1.39.0-1
extra/gtk2 2.16.2-1 -> 2.16.4-1
extra/imagemagick 6.5.3.2-1 -> 6.5.3.10-1
extra/libcups 1.3.10-2 -> 1.3.11-1
extra/libjpeg 6b-6 -> 7-1
extra/mplayer 29318-1 -> 29411-3
Fortunately, I used clonezilla to back it up first
Maybe one of these will match something that updated on yours
Last edited by orphius1970 (2009-07-14 12:40:13)

Similar Messages

Help required: unable to debug in NDS

Hello there,
I am unable to debug in NDS. When i try to debug I get the following error
Exception occured creating launch configuration tabs
Reason:
No tab group defined for launch configuration type
org.eclipse.jdt.launching.remote.JavaApplication
After this I am unable to create a new configuration for Remote Java application, although I can do the same for J2EE Application.
Also, the options in I can see in Windows->Preferences is less compared to what i could see earlier.
I am unable to find the cause of the error. Reinstalling NDS has been of no help.
Kindly help.
Thanks in advance.
Regards,
Latika

Hi All,
Reinstalling NDS alongwith changing the path of installation solved the problem.
Regards,
Latika Sethi.

[SOLVED] Help required to boot fresh installation. New to GPT.

Hi all,
I have been using Gnu/Linux since 1998 and Arch since 2007.
I stopped playing the pacman gamble game and had left my system for a few months between updates. I reached a state where I thought it was easier to reinstall and decided to back up my home dir and simplify my partitions back to a single / and just /tmp, /var and /home on separate drives. Also it seemed a good time to switch to GPT and use Syslinux boot loader.
I have followed the Official and Beginner's Installation instructions but cannot boot into my newly installed system. I have used /dev/ designations and UUID designations in my syslinux.cfg but when I try to boot into the new system I either get errors saying my root is a raid member or there is no /sbin/init found.
I have then tried repartitioning using standard MBR partitions but get Missing OS errors. Is there a simple path I should follow?
I am using the following drives......
/dev/sdb Kingston 30GB SSD
/dev/sdb1 /
/dev/sda Western Digital 160GB
/dev/sda1 /tmp
/dev/sda2 /var
/dev/sda3 SWAP
/dev/sda4 /home
/dev/sdc Seagate 2TB
/dev/sdc1 RAID Member
/dev/sdd Western Digital 2TB
/dev/sdd1 RAID Member
/dev/sde Western Digital 1TB
/dev/sde1 RAID Member
/dev/sdf Samsung 1TB
/dev/sdf1 RAID Member
I have installed Mint 14 and Neptune 3 on the same drives with no issues but I want to keep using Arch. I am at a loss for what to do next.
I am considering removing all drives except the 30GB SSD and the 160GB /tmp,/var,SWAP,/home drive and trying again.
Can any one hold my hand through this..... please?! I really do not want to drop Arch as it is for me *the* Linux distro.
Honestly though I would appreciate any help. I am going slightly mad!
Diesel1.
I apologise now for any lack of info but it is late and I need sleep.
Last edited by diesel1 (2013-03-28 19:41:23)

s1ln7m4s7r wrote:
Looking into your hd setup, i would recommend: GPT + SYSLINUX
as the / partition.
You say you already tried this setup and couldn't boot it, but it is as easy as it gets. I must say that arch is a "do it yourself distro", so we are not supposed to hold your hand. BUT, we can help you understand what you did wrong, if you missed something, etc.
If you are able to, you can post the steps you made in your attempt to install arch, and then someone will help you with that!
REMEMBER, you should always read the wikis and search the forum to see if anyone gets the same errors as you before posting.
Thanks for the reply. It is kind of you to 'help me understand' what I did wrong!
I tried again with a different partition set-up and re-read the wikis thoroughly. This time it has worked and I am now booted into my GPT+SYSLINUX Arch system.
From what I can see I needed a separate /boot partition on the same disk (30GB SSD) as the / partition. D'oh! It is the simple things that seem to trip me up.
Anyhow, thanks again,
Diesel1.

Help Required :Unable to auto generate the layout in BIP

Hi All,
This is Ronny, I am really having a tough time using OBIEEE. I am trying to create a simple report in which when i try to auto genreate a rtf template then it says *" failed to load the layout"* and gives me connection timed out error ( unable to autoload). I edited it and tried a simple select statement but still no luck.
Has somebody else faced the same problem, I request you to please give me your inputs on the same.
Thanks in advance
Ronny.

Hi Sree,
Thanks a alot for replying, i use the query builder to build the initial query but even after that it fails to auto load the template. I tried building the simplest of queries through the query builder but got the same error even when the query runs fine in TOAD . However, upon trying again i got some luck and it generated the template. But still for me, its a hook and crook means i am not sure that that it would generate the template again for me or not.
Thanks alot for replying ..however, i am working on this and will get back to you once i get the error again.
Thanks
Ronny

[SOLVED] Help Required Installing True Type Fonts

I am currently using Xfce4.8 and have installed xorg-fonts-100dpi xorg-fonts-75dpi and type 1 fonts.
Now the fonts in xfce are starting to look good, menu fonts on firefox look good but many webpages
are using ugly non aliased fonts.
I would like to include the ttf-ms-fonts and have found the folowing wiki page:
http://aur.archlinux.org/packages.php?ID=13030
I have installed the dependemcies
fontconfig xorg-font-utils xorg-fonts-encodings
and also just one font:
http://downloads.sourceforge.net/corefonts/verdan32.exe
I am unsure how to install the verdana font so any help appreciated, thanks in advance.
Last edited by hal8000 (2011-05-21 16:05:49)

Thanks Guys, I am now having trouble with makepkg
I have unzipp ttf-ms-fonts
[anc@orac ttf-ms-fonts]$ ls
LICENSE PKGBUILD ttf-ms-fonts.install
When I run makepkg this error appears:
[anc@orac ttf-ms-fonts]$ makepkg
==> ERROR: Fakeroot must be installed if using the 'fakeroot' option
in the BUILDENV array in /etc/makepkg.conf.
So I check contents of /etc/makepkg.conf
--snip--
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
BUILDENV=(fakeroot !distcc color !ccache check)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
This looks as though option fakeroot is enabled, is there anything else I need to change?

Help! Unable to set up Express.

Ok...
Very frustrating.
I have had my AE for a while now. Today, it stopped working. The yellow light just kept flashing on and off. I've tried everything: hard reset, waiting a few minutes, etc. I get as far as the Airport Amin Utility configuring it, with "the base station settings are being configured" and the blue bar filling up. Then, the signal drops again, and the yellow light starts flashing, instead of the solid green light I should be getting. This has happened at least 5 times when I try to configure through the admin utility.
What am I missing? I don't think I'm doing anything differently from other times I've set it up successfully.
Thanks.
Joel

Are you configuring the Express base station via Ethernet cable?
Does your source datacable work when you connect direct to the
computer, to go online, or does it also balk?
The Network control panel allows settings and configuration changes
and if these are not set correctly the wireless base may not be seen.
And, lastly, the Express unit may be failing. A certified/reman unit
can be purchased direct from Apple online for a reasonable discount.
Hopefully you can sort out software and hardware causes. Good luck!

[Solved] Help Needed, Unable to Upgrade.

I tried to update my archlinux.
sudo pacman -Syu
But after all the packages are download, I get these messages for everything:
(379/379) checking keys in keyring [########################################################] 100%
(379/379) checking package integrity [########################################################] 100%
error: libnice: signature from "Ionut Biru <[email protected]>" is invalid
:: File /var/cache/pacman/pkg/libnice-0.1.4-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] n
error: lirc-utils: signature from "Tobias Powalowski <[email protected]>" is invalid
:: File /var/cache/pacman/pkg/lirc-utils-1:0.9.0-45-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] n
error: lsof: signature from "Tom Gundersen <[email protected]>" is invalid
:: File /var/cache/pacman/pkg/lsof-4.87-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
What should I do?
I tried, SIGLEVEL = Never
SIGLEVEL = Optional
but none worked.
Would be happy to sort this out.
Last edited by Avasz (2013-05-19 09:09:04)

(379/379) checking keys in keyring [########################################################] 100%
(379/379) checking package integrity [########################################################] 100%
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
Now it doesnt ask to delete the corrupted packages, but gives this error directly.

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

I recently purchased my first MacBook Air but am unable to set up my @live.ie email account. My emails to this account come through to my iphone no problem. Can anyone help please?

I recently purchased my first MacBook Air but am unable to set up my @live.ie email account. My emails to this account come through to my iphone no problem. Can anyone help please?

Open Mac Mail.
From the menu bar click Mail > Preferencees then select the Accounts tab then the Account Information tab then click + to add the account.

Please kindly help me out.... i just update my iphone to the latest os but i was unable to set my phone up now

Please kindly help me out.... i just update my iphone to the latest os but i was unable to set my phone up now

Did you buy your phone unlocked from Apple or did you have the original carrier unlock it? Or did you have some third party unlock it for you? If the latter, and you are trying to set the phone up with a different carrier than the original, you're going to have problems as the update most likely reversed the unauthorized unlock.

Please help: unable to set preferences for planning from workspace.

Hi Experts,
unable to set preferences for planning from workspace.(file--->preferences----->planning), when doing this task prompts " An Error occured" preferences works fine with other components IR, FR, WEB ANALYSIS.problem is only with the planning.
1) i restarted the workspace and planning services but even then the same issue.
Please help me out on this issue.
Thanks.

Hi,
Do you get the same problem if you access planning directly ? http://<planningmachine>:8300/HyperionPlanning/
Just trying to understand if it related directly to planning and maybe you will get a different error message.
Cheers
John
http://john-goodwin.blogspot.com/

HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.

[SOLVED] Help required, unable to set a wallpaper.

Similar Messages

Maybe you are looking for