[Solved]Help with printer

Hi!
I`m really frustrated... I never thought that installing printer can be such a paint in the rear...
Ok, now back to the point:
I`m trying to set up my Deskjet 930c on 32 bit Arch through usb. I did everything that Wiki says: installed
cups ghostscript gsfonts hplip and net-snmp
I loaded the module
modprobe usblp
and i see the that the printer is connected alright
[andy@andy ~]$ dmesg
usb 6-1: new full speed USB device using uhci_hcd and address 3
usb 6-1: configuration #1 chosen from 1 choice
usblp1: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
I added the cups and usblp to rc.conf to make sure it is being loaded on startup. I rebooted, and then opened http://localhost:631 in firefox. It allows me to setup the printer, but when it comes to printing the test page, adding users or removing printers i get a Firefox message:
Port Restricted for Security Reasons
This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection.
The requested address specified a port (e.g. "mozilla.org:80" for port 80 on mozilla.org) normally used for purposes other than Web browsing. The browser has canceled the request for your protection and security.
When i run gnome-cups-manager i see an error in terminal:
** (gnome-cups-manager:13143): WARNING **: IPP request failed with status 1030
, and when trying to print a test page i get an error:
Ready: /usr/lib/cups/filter/foomatic-rip-hplip failed
So i`ve ran
hp-setup
and setup my printer. I can than print a test page.
But when it comes to printing by a usual user, the "print" button in all applications is grayed out/inactive.
Also hp-toolbox is segfaulting all the time...
Also, running a system-config-printer says:
There was an error during the CUPS operation: 'server-error-service-unavailable'.
The funny thing is... The only way to print something is to print it to a .pdf file first, and than printing that file.
Any help, please?...
Last edited by K0tuk (2009-05-02 11:19:12)

skottish wrote:
Do you mean this message screen?
http://bbs.archlinux.org/viewtopic.php?id=70775
If that thread doesn't solve your problem, then there are a bunch more CUPS threads that are less than two weeks old that will.
omg! huge thanks, that completely solved my problem... i wasn`t actually concentrating on the firefox error, more on the cups errors that followed... thanks again!

Similar Messages

Help with Print Layout Designer

Hi all,
I'm not sure if I should post this here or not, I already posted it in the Business One Forum. Moderator(s) if this is not the proper place please delete it and let me know that it is not the appropriate venue.
I need some help with Print Layout Designer. I am running 2005A SP01, and my customer wants a modification to the Sales Backorder Report. They want to add the column "In Stock" to both the report as displayed on the screen and the printed document. The report rendered to the screen has the In Stock, but it is not checked as visible. I check it and In Stock shows up as designed. The part I am having problems with is the printed document. I opened the PLD from the Backorder Report, and saved it under a different name. I resized some of the columns in the repetitive area (header and data) to make room for the In Stock column. I CAN add the text field Instock as free text and enter "In Stock" as the content. I looked at the "backorder" column in the PLD, and it is a text field with the source System Variable and the variable is 109. I would assume that all I need to do in my added column is to set the source to System Variable and enter the variable number. That is the problem; I can't find the variable number for that column. I looked on the report rendered to the screen with system information on and the variable is "3 #000027825,OnHand". I looked at the Back Order column of the report rendered to the screen and the variable is "3 #000028725,OpenCreQty". I found a spreadsheet that is supposed to contain a list of system variables for 2007A, but the document type for this report is BRDR and that document type does not appear in the list of document types in that spreadsheet. I looked for a similar spreadsheet for 2005A SP01 but didn't find one. I DID find a document "How To Customize Printing Templates with the Print Layout Designer". According to that document, I should be able to get the system variable from the report rendered to the screen with System Information turned on. Can anyone help?
TIA,
Steve

I haven't dealt with this before so I can't be certain, but here are my thoughts.
The Backordered Qty is probably a calculated field, so that's why it's a system variable. The In Stock is a defined field, so you probably can use the file and field number, OITM, OnHand. I would look at maybe the stock number or description to see how those are setup on the form instead of the backordered qty field.

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Need help with Printer Setup conventions

I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.

Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

Need some help with printing Templates

Hi All,
So I was hoping for a bit of help. I am currently doing all illustrator work for my new job. I have not been on the program in a long time and the version I am using is CS4. I have been creating brochures and flyers all A4 size and i have hit a bump in the road. I need a 6pp A4 Z folded (Inside) and 6pp A4 Z folded (outside) template. I Have been using the A3 folded to A4 guides to great affect for a two page brochure. But i cannot for the life of me find a template guides for 6pp A4 brochure.
This was the best i could do, its a pdf but I prefer working with the guides. I have just been downloading the previous templates from commercial printing websites. I found one that was right but not compatible with CS4.
Any help with finding one or any ideas on a path to take would be greatly appreciated.

Why don't you just setup the file you need?
Create your guidelines and there you go.

Help with printing hard copy from Acrobat PDF

Copy created in InDesign and printed to Adobe PDF is OK on screen but printing hard copy with random chunks of text missing. Same on both my printers, doesn't happen with doPDF. Any ideas? Thanks

I suspect that what you are asking is simply to print to a new PDF with print as image selected. You can also save as an image file and then open the images as a new PDF.

Help with printing photos on photo print paper with Desk-jet 3050A

Hello I am in need of some advise regarding my desk-jet 3050A printer, the problem is that I cant seem to print pictures on to my glossy photo print paper; I can print pictures onto standard A4 plain paper but the pixels have blurred slightly.
I cant seem to find any accurate advise regarding which photo printer paper is compatible with my printer and how to actually print a picture onto both plain paper/photo paper at a good quality, any help would be appreciated, let me know if you need anymore information. Thanks
Chris
OS: Windows 7 Home Premium 64-bit
Make: HP Desk-jet e-All-in-one Printer
Model: J611a series 3050A
Product serial No: {Removed for privacy}
FPU No: CR231-64001

Hi,
What exactly is going wrong? and with the link below you can find the specs of the printer. Under paper handling the sizes and paper weight that are supported are listed.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Help with printing document via wireless

The printer is connected to PC via wireless and has worked ok for a long time.
Thr printer seems to be working ok (copying ok).
Although printer icon is ready, any document sent to print sits in a queue and does not print. I have downloaded the updated version off the internet (HP website) for the HP 3050A driver and installed ok (who knows).
Can you help?
cheers

Hi @PPritchard ,
I see that you are having issues with the print jobs just sitting in the queue and won't print. I will certainly do my best to help you.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
On the printer control panel, press the Wireless button (). The Wireless menu opens.
Press the button () next to the Down Arrow () to scroll through the options and select Print Reports, and then press the button next to OK.
Press the button () next to Wireless Test to print the page.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Help with print settings for Panoramas

Hi,
I use an Epson 2880 and I am trying to figure out the print settings for doing an 11 x 34in panorama print on 13" roll paper from Aperture 3.0.3. I finally got it to do one print properly, but the setup was totally counter intuitive and I can't reproduce it. I tried using "Custom" Paper size and setting it to 13" x 36", then using the landscape mode and setting the Image Size to 11 x 34". Any way I did this ended up with the image printing the wrong way on the paper. So I went back and picked "Roll" paper. This leaves only one field to fill in, which I presume is the paper width (it really didn't make this obvious in the dialogue.). Then I set the mode to Portrait, and made sure that the settings for the Image size were 11 x 34. It then printed fine. But when I went back to print another file, even though I had saved the settings, now I am presented with only one box for specifying the Image Size and there is no way to get it right again. HELP! The settings for this kind of print in Photoshop is also counterintuitive, but when you get it set right, and you know the settings, no problem reproducing it. I think maybe there is a bug in AP3 with regard to this sort of setup.

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with printing a SCORE To PDF! Urgent

so once again I'm on a deadline and struggling with the score editor. I have a large score. I have been formatting one page at a time, and then moving on. What I mean exactly is that I get page 1 the way I want it, select print and then preview, save as to a PDF, and then move on with page 2 and do the same thing.
This was working, up until page 13 (ironic). Page 13 had much more going on notes wise, so I dropped the scale of the score set by one percentage point, from 82 to 81%, so that I could still fit everything I wanted on the page and have it look good. But then when I went to print preview, the formatting was all screwed up, and now I can't figure out how to make it look good, while still keeping the decreased scale.
Please, someone tell me you know how to get around this. It seems like what it says in the manual doesn't apply at all when it comes to preparing a score for printing, and I'm on a deadline for a grant and very frustrated.
Help?
Thanks....

There are 3 ways in which you can affect the size of the Score to Print:
1) The Page Set up ( which is probably the one you have been using - it may be that below 80% the Score cant be defined in terms of the information on it.. not sure about this)
2) In the Score Editor if you go to Layout>Create Score Set from Selection and then open Staff Styles.. there is a Scaling Parameter there which reduces/enlarges the Score
3) In Layout>Staff Styles> You can also change the size of the stave in individual parts which would reduce your Score size
Hope this is in time for that deadline
MS
PS You are correct to print from PDF - printing from the Score Editor will not solve your problem AFAIK
Message was edited by: musicspirit

Help with printing a tic tac toe board (using a loop to print)

hey im making the smiple game tic tac toe and im tryin to print out the board after each turn. I have a 2d array called char which is a 3 by 3 array and i dont know how i would make a for loop to print out the x's and o's in their right spot and still have the board look like a normal tic tac toe board. When the board is printing the x's and o's are already in the 2d char array board.So basically what i want to happen is after player 1's turn is up wherever he put the x replace the number on the board with an x and keep the rest the same and whenever player 2's turn is up wherever he put the o replace the number on the board with an o and keep the rest the same. Any help would be awesome thanks alot.
Here is the code to the program (i know i use if statements to much its a bad habit of mine)
import java.util.*;
public class Tictactoe
    private char board [] [] = new board [3] [3];
    private int X;
    private int O;
    private Scanner p1choice;
    private Scanner p2choice;
    Scanner input = new Scanner(System.in);
    public Tictactoe()
        p1choice = new Scanner(System.in);
        p2choice = new Scanner(System.in);
        play();
    public void play()
        printoriginalboard();
    public void printoriginalboard()
        System.out.println("    |    |    ");
        System.out.println(" 3 | 2 | 1 ");
        System.out.println("____|____|____");
        System.out.println("    |    |    ");
        System.out.println(" 6 | 5 | 4 ");
        System.out.println("    |    |    ");
        System.out.println("____|____|____");
        System.out.println("    |    |    ");
        System.out.println(" 9 | 8 | 7 ");
        System.out.println("    |    |    ");
        System.out.println("This is the classic game of tictactoe simply pick a number 1 through 9 to place an x or an o in that area.");
        player1turn();
    public void player1turn()
        System.out.println("Player 1 pick an area to place an X");
        int p1choice= p1choice.nextInt();
        if(p1choice == 1 && p2choice == 1 || p1choice == 1){
            System.out.println("This spot has already been taken");
            else
            board[0][2] = 'x';
        pintboard();
        if(p1choice == 2 && p2choice == 2 || p1choice == 2){
        System.out.println("This spot has already been taken");
        else
            board[1][2] = 'x';
        pintboard();
        if(p1choice == 3 && p2choice == 3 || p1choice == 3){
        System.out.println("This spot has already been taken");
        else
            board[2][2] = 'x';
        pintboard();
        if(p1choice == 4 && p2choice == 4 || p1choice == 4){
        System.out.println("This spot has already been taken");
            board[0][1] = 'x';
        pintboard();
        if(p1choice == 5 && p2choice == 5 || p1choice == 5){
        System.out.println("This spot has already been taken");
        else
            board[1][1] = 'x';
        pintboard();
        if(p1choice == 6 && p2choice == 6 || p1choice == 6){
        System.out.println("This spot has already been taken");
        else
            board[2][1] = 'x';
        pintboard();
        if(p1choice == 7 && p2choice == 7 || p1choice == 7){
        System.out.println("This spot has already been taken");
        else
            board[0][0] = 'x';
        pintboard();
        if(p1choice ==8 && p2choice == 8 || p1choice == 8){
        System.out.println("This spot has already been taken");
        else
            board[1][0] = 'x';
        pintboard();
        if(p1choice == 9 && p2choice == 9 || p1choice == 9){
        System.out.println("This spot has already been taken");
        else
            board[2][0] = 'x';
        pintboard();
    public void p2turn()
        System.out.println("Pick an area to place an O");
        int p2choice = p2choice.nextInt();
        if(p2choice == 1 && p1choice == 1 || p2choice == 1){
        System.out.println("This spot has already been taken");
        else
            board[0][2] = 'o';
        pintboard();
        if(p2choice == 2 && p1choice == 2 || p2choice == 2){
        System.out.println("This spot has already been taken");
        else
            board[1][2] = 'o';
        pintboard();
        if(p2choice == 3 && p1choice == 3 || p2choice == 3){
        System.out.println("This spot has already been taken");
        else
            board[2][2] = 'o';
        pintboard();
        if(p2choice == 4 && p1choice == 4 || p2choice == 4){
        System.out.println("This spot has already been taken");
        else
            board[0][1] = 'o';
        pintboard();
        if(p2choice == 5 && p1choice == 5 || p2choice == 5){
        System.out.println("This spot has already been taken");
        else
            board[1][1] = 'o';
        pintboard();
        if(p2choice == 6 && p1choice == 6 || p2choice == 6){
        System.out.println("This spot has already been taken");
        else
            board[2][1] = 'o';
        pintboard();
        if(p2choice == 7 && p1choice == 7 || p2choice == 7){
        System.out.println("This spot has already been taken");
        else
            board[0][0] = 'o';
        pintboard();
        if(p2choice == 8 && p1choice == 8 || p2choice == 8){
        System.out.println("This spot has already been taken");
        else
            board[1][0] = 'o';
        pintboard();
        if(p2choice == 9 && p1choice == 9 || p2choice == 9){
        System.out.println("This spot has already been taken");
        else
            board[2][0] = 'o';
        pintboard();
    public void pintboard()
    {

Anyway the answer is that you are trying to create an array of char as there is no such thing as a board[3][3].
One of the best tools a programmer can do is learn how to break a big problem into little problems and work on each little problem in isolation, and then when finished combining the solutions together into the final program. You big mistake that I see here is trying to bite off more than you can chew: trying to create a whole functioning interactive program from just one class. Why give yourself a task that would be difficult even for an experienced java programmer? I suggest that you break this down into logical parts and try to solve the smaller problems before worrying about the whole. For instance, if I were doing something like this, I'd create a class called TTTBoard that encapsulated the tic tac toe board and nothing but the board. I'd think of it as an entity. When I wanted the current state of the board, I'd query the board via a method such as getCurrentState. I'd have methods for checking if position is free, for placing an x/o in a spot, for checking for win, etc... Then I'd create a user interface class where I'd give the users a choice and get their responses. I'd probably create a Game class to control it all. While this all seems daunting, you are trying to do essentially the same thing, but all in one huge class. My recommendation: study OOPs and learn to do it the smart way. Good luck.

Need Help with Print a Report

Hi,
I am building a database application in Java and now i need to print some reports ....
I need to get the data from the database .. do some calculations , and then print in on paper.
I checked online and got some tools like JasperReports, jfreereports, ReportCat, etc. so I was wondering if somebody can suggest whats the best.
In my report I will have to print more than one table on one page.
for example:
if I have 4 Invoices. then i will have 4 tables .. one for each invoice.. and each table will contain
the elements for that Invoice.If all can't fit on one page then it needs to go next page.
I would like to do all this stuff in Java without using any reporting tool ... but I am not really sure how this can be
done .. can someone give me an idea ... as per how this can be done .. will really appriciate all the help.
Thanks in advance,
sandsouza

Hi,
Can somebody please help me with this.
Thanks in advance
sandsouza

Need help with printing edocs with a laserjet1320. Wont print large jobs. installed 10.7 update.Help

i am trying to print 50 page(5mb) document package on legal paper and the printer is printing one page at a time. I am using a macbook pro 10.7 and I have installed the update. however, it seems as though the computer is not correctly communicating with the printer. A four page job was no problem. I believe these printers are capable of high volume printing. Can I reinstall the firmware? Adobe acrobat will not even communicate with the printer. It just says "waiting for printer to become available." Using "preview", it sends the job to the printer, however, it is printing about 5pages per minute. It is connected through a usb cable. thanks for your help.
Randy

Randys714 welcome to the forum
Your laserjet1320 is a commercial product. I will suggest posting in the forum for HP Business Support as well for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Help with printing text to Text Edit

-- Here is a applescript that generates prime numbers up to a certain number. I tried to get the script to print out every number up to the number defined in a text edit document. I got a -1700 error that says (error "Can’t make result of 3 into type Unicode text." number -1700 from result of 3 to Unicode text). If anyone has any help that they can offer me it will be greatly appreciated.
Heres the Script
local min, max, neverZero, maxDiv, divTry, res
set {min, max} to {1, 503}
set res to {}
if min = 1 then set min to 2
if min = 2 then set {res, min} to {{2}, 3}
if min mod 2 = 0 then set min to min + 1
repeat until min > max
    set maxDiv to intsqrt(min)
    set {neverZero, divTry} to {true, 3}
    repeat until divTry > maxDiv
        if min mod divTry = 0 then
            set neverZero to false
            exit repeat
        end if
        set divTry to divTry + 2
    end repeat
    if neverZero then
        set res to res & min
        log min
        set resultinfo to "" & result of min
        tell application "TextEdit"
            activate
            set nme_file to ""
            set the_file to (open for access nme_file with write permission)
            write "" & resultinfo to the_file
            write return & resultinfo to the_file starting at eof
            close access the file
        end tell
    end if
    set min to min + 2
end repeat
on intsqrt(N)
    return (do shell script "echo 'sqrt (" & N & " )' | /usr/bin/bc")
end intsqrt

You're confusing two different steps. If you want to write the data to an open textedit window, you build a text string of the integers and then write it out to the window like this:
tell application "TextEdit"
          set text of document 1 to text_string
end tell
After that you'll have to save the document. On the other hand, if you want to write directly to the file on disk, don't use a textedit tell block - just write to the file at the script level (i.e. your code looks correct, but shouldn't be in a tell block). then you'll have to convince the open textedit window to refresh (which might be a bit tricky).

Help with print booklet to PostScript, Distiller

Please help if you can.
I am printing a booklet from InDesign CS3 to a PostScript file to then create tabloid-size imposed pages to send to a client for printing. It works when I do it with a legal-half booklet, but is failing with letter-size pages going to tabloid imposed pages (1 & 8, 2 & 7, etc.)
All I get is a log. Here is the log:
%%[ Error: invalidaccess; OffendingCommand: findfont ]%%
Stack:
/Font
/Tags
/CompressObjects
-dict-
/Description
/False
/PDFXTrapped
/PDFXRegistryName
/PDFXOutputConditionIdentifier
/PDFXOutputCondition
(None)
/PDFXOutputIntentProfile
[0.0 0.0 0.0 0.0]
/PDFXBleedBoxToTrimBoxOffset
true
/PDFXSetBleedBoxToMediaBox
[0.0 0.0 0.0 0.0]
/PDFXTrimBoxToMediaBoxOffset
true
/PDFXNoTrimBoxError
false
/PDFXCompliantPDFOnly
false
/PDFX3Check
false
/PDFX1aCheck
[/None]
/CheckCompliance
false
/AllowPSXObjects
(None)
/ColorSettingsFile
false
/InternalDisablePathOptimizer
0
/InternalForceUserUnit
false
/InternalDropAllImageData
0
/InternalOffOptimizations
0
/OffOptimizations
/Default
/DefaultRenderingIntent
1
/OPM
/Left
/Binding
true
/Optimize
false
/LockDistillerParams
false
/UsePrologue
true
/PreserveEPSInfo
true
/PreserveCopyPage
false
/PresumeRGBRepresentationIsLossless
true
/ParseDSCCommentsForDocInfo
true
/ParseDSCComments
1
/StartPage
false
/DoThumbnails
-1
/EndPage
false
/EmitDSCWarnings
(sRGB IEC61966-2.1)
/CalRGBProfile
(sRGB IEC61966-2.1)
/sRGBProfile
(Dot Gain 20%)
/CalGrayProfile
(U.S. Web Coated $SWOP$ v2)
/CalCMYKProfile
0.0
/DetectCurves
true
/DetectBlends
false
/CreateJDFFile
1.0
/SyntheticBoldness
0
/DSCReportingLevel
false
/EmbedJobOptions
false
/CreateJobTicket
true
/AutoPositionEPSFiles
/OK
/CannotEmbedFontPolicy
100
/MaxSubsetPct
true
/SubsetFonts
true
/ParseICCProfilesInComments
false
/EmbedOpenType
true
/EmbedAllFonts
/NeverEmbed
/AlwaysEmbed
false
/AllowRelativePathOps
false
/AllowTransparency
1048576
/ImageMemory
true
/PassThroughJPEGImages
true
/ConvertImagesToIndexed
-dict-
/MonoImageDict
/CCITTFaxEncode
/MonoImageFilter
true
/EncodeMonoImages
1.5
/MonoImageDownsampleThreshold
-1
/MonoImageDepth
1200
/MonoImageResolution
/Bicubic
/MonoImageDownsampleType
true
/DownsampleMonoImages
/OK
/MonoImageMinResolutionPolicy
1200
/MonoImageMinResolution
true
/CropMonoImages
false
/AntiAliasMonoImages
-dict-
/JPEG2000GrayImageDict
-dict-
/JPEG2000GrayACSImageDict
-dict-
/GrayImageDict
-dict-
/GrayACSImageDict
/JPEG
/GrayImageAutoFilterStrategy
true
/AutoFilterGrayImages
/DCTEncode
/GrayImageFilter
true
/EncodeGrayImages
1.5
/GrayImageDownsampleThreshold
2
/GrayImageMinDownsampleDepth
-1
/GrayImageDepth
300
/GrayImageResolution
/Bicubic
/GrayImageDownsampleType
true
/DownsampleGrayImages
/OK
/GrayImageMinResolutionPolicy
300
/GrayImageMinResolution
true
/CropGrayImages
false
/AntiAliasGrayImages
-dict-
/JPEG2000ColorImageDict
-dict-
/JPEG2000ColorACSImageDict
-dict-
/ColorImageDict
-dict-
/ColorACSImageDict
/JPEG
/ColorImageAutoFilterStrategy
true
/AutoFilterColorImages
/DCTEncode
/ColorImageFilter
true
/EncodeColorImages
1.5
/ColorImageDownsampleThreshold
1
/ColorImageMinDownsampleDepth
-1
/ColorImageDepth
300
/ColorImageResolution
/Bicubic
/ColorImageDownsampleType
true
/DownsampleColorImages
/OK
/ColorImageMinResolutionPolicy
300
/ColorImageMinResolution
true
/CropColorImages
false
/AntiAliasColorImages
true
/PreserveFlatness
false
/PreserveHalftoneInfo
true
/PreserveDICMYKValues
/LeaveColorUnchanged
/ColorConversionStrategy
true
/PreserveOverprintSettings
/Preserve
/UCRandBGInfo
/Apply
/TransferFunctionInfo
/All
/AutoRotatePages
true
/UseFlateCompression
false
/ASCII85EncodePages
true
/CompressPages
false
/PreserveOPIComments
1.5
/CompatibilityLevel
8000
/CoreDistVersion
-mark-
/Apple-Chancery
/Apple-Chancery
/IERNAS+App

I am using Print Booklet from InDesign CS3, printing to a PostScript file.
I saw Apple Chancery in the log so I thought that might have been the problem. So I went back to Suitcase Fusion and activated Apple Chancery, with the same result.
I do note that Apple Chancery is a TrueType font. The other fonts in the publication are Arial family (OpenType TrueType) and Times Regular (TrueType). Preflight in ID CS3 indicates no problems, all fonts are OK, and none are protected.
Quit InDesign and re-launched. Same problem.

[Solved]Help with printer

Similar Messages

Maybe you are looking for