[SOLVED] Highlight Window effect doesn't work

Hello
I have KDE 4.4 installed and it's working really fine, with one exeption: The desktop effect "highlight window" is not working, no mater what I try (disabling all other effects, enabling just a few, disabling and reenabling compositing). Nothing helped!
The other "related" desktop effect, where you can maximize windows by dragging them to the borders of your screen, is working like a charm, also the preview of a window in the taskbar (if you hover over it with your mouse), all fine.
But not "highlight window"
Does somebody know what to do, where to look, what to try?
Thanks
n8schicht
EDIT: Never mind, I just realized I had to go to the task bar settings and enable "Highlight windows" there, too
Last edited by n8schicht (2010-02-11 09:06:09)

Go to 'System Settings' -> 'Application Appearance' -> 'Style' -> 'Fine Tuning' and change 'Menubar style' to 'Only export'. Just checked, works fine with qt applications.
I'm not sure about gtk apps, though. I recall reading somewhere that, in addition to installing appmenu-gtk and its dependencies, one needed to specify something in the .gtkrc and/or .config/gtk-3.0/settings.ini file(s). Well that or my memory might just be playing tricks on me.
EDIT:
If for some reason gtk apps refuse to export their menus, you might want to look at this webupd8 article. Good luck!
Last edited by andy_v (2013-06-22 12:36:50)

Similar Messages

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

Question '''OS Win2000''' using '''FireFox 5.01 - portable''' Problem: '''Plug-in for Windows-Mediaplayer doesn't work

'''OS Win2000'''
using '''FireFox 5.01 - portable'''
Problem:
'''Plug-in for Windows-Mediaplayer doesn't work '''
cause: presumably - Win2000 only copes with WMP 9.0
Your FF 5.01-portable works only for WMP 12 (??)
I have no problems with WMP when I use my regular FF 3.6 on this old Win2000. - WMP - Plug-in of FF3.6 works perfectly on my Win2000
'''question:'''
What can I do to get WMP running on my Win2000 using FF5.01-portable ?''''''

See the Portable Firefox support forum for help with that. <br />
http://portableapps.com/forums/support/firefox_portable

GPO don't run specified windows applications doesn't work to in win 8.1. any ideas why?

GPO "don't run specified windows applications" doesn't work to in win 8.1. any ideas why? it is enabled and list of progs is entered however I can still run all progs on list. This is a local machine not on a domain. I must
have this work to disable games, IE, MSpaint, etc. Computer has been restarted since enabling the GPO and also have enforced the GPO via CMD prompt. worked fine on windows 8 and 7.

Any success ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

[Solved] ASUS F3Ka bluetooth doesn't work

Hi everybody!
Can anybody help me with getting bluetooth to work on ASUS F3Ka please?
Here is the dmesg output:
[n0ne@darkstar ~]$ dmesg | grep Blue
Bluetooth: Core ver 2.11
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
I've got bluetooth daemon in my DAEMONS array in /etc/rc.conf
BUT it still doesn't work:
[n0ne@darkstar ~]$ sudo -s
[root@darkstar ~]# hcitool inq
Inquiring ...
Inquiry failed.: No such device
Any ideas, please?
Last edited by alcazoid (2008-03-29 22:48:00)

some stuff ive noticed with laptops and bluetooth...
- bluetooth/wireless works in a lenovo i recently installed ubuntu in only after I suspend to ram. This is due to some weird Radio kill switch bug
- sometimes leaving bluetooth and wireless turned on on wiindows has its effects in linux, because windows drivers sometimes do not release control of the hardware. So try a cold boot, and if that doesn't work, a reboot from windows...'
- try variants of leaving the bluetooth switch on/off during the boot process
none of these actually seem like logical solutions, but thats how bluetooth/wireless and linux sometimes is..good luck!

[Solved] KDE Desktop Effects no longer working

Hello,
I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
"For technical reasons it is not possible to determine all possible error causes.
Desktop effect system is not running."
For the record, I am on a Thinkpad X201 with intel graphics.
Any ideas?
Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)

Some Extra information:
I just tried a restart, that didn't work.
I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
Application: KWin (kwin), signal: Aborted
Using host libthread_db library "/usr/lib/libthread_db.so.1".
To enable execution of this file add
add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
line to your configuration file "/home/perry/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/perry/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
[Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
#0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
#1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
#2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
[KCrash Handler]
#5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
#6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
#7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
#8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
#9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
#10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
#11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
#12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
#13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
#14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
#15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
#20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
#21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
#22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
#23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
#24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
#25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
#26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
#28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
#31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
#32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
#33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
#34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
#37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
#38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
#39 0x00000000004006fe in _start ()

HT4061 Drag and drop function in Windows 8 doesn't work with iTunes.

How to import music files from Windows 8 to iTunes 11.0.3 x64? Drag and drop function doesn't work. Thank you!

> Straight drag and drop to PS produced a warning message so, when I then tried to drag on to the PS task bar button, I got the Ø cursor but on moving into the PS window and releasing the mouse button there, the file opened.
That's the strangest behavior that I would imagine. Are you using the default vista aero theme or you have turned down or using custom theme and visual effects?
> it needs to be pointed out that this is a really bad habit that will smack you in the face one day...
I don't understand what you mean. If you are concerned about viruses, in my understanding copying and opening a file from the internet which is what "Save image as" does, is less safe than coping and pasting pixels. Copying and pasting pixels is the same as coping and pasting text from your web browser, it can't execute hidden code. If that was possible everybody will get viruses at the moment text or pixels are displayed on your browser.
By the way when you view a page from the internet, image files are already downloaded in the temp folder of your computer but only the browser uses them unless you open them from there and use in another program. So if you have a virus protection the images are already scanned.

BAD TV effect doesn't work anymore.

Hi friends.
My BAD TV effect in Final Cut Pro X (release nr. 10.1.3) on my iMac (iOS 10.9.5 Intel Core 2 Duo 3.33 GHz, 6 GB ram ddr3, 1 TB hd) doesn't work anymore.
Clicking a clip and then moving the mouse over the effect does't make it previewing the effect; applying the effect results in a black clip in the Viewer.
It's the only effect not working.
Anyone knows how to solve this problem?
Thanks in advance.

Project is 1280 x 720 at 50 fps.
Media Spec are 1280 x 720 at 59,94 fps (Gopro) and 1920 x 1080 25 fps with a photographic camera (don't know name and model, it's of a friend of mine).
I tried the effect on both media specs. And... sometimes in preview mode (media selected, scroll on effect) it works, but when applied the clip goes completely black. If I uncheck the effect, clip works ok.
It's like FPCX could not render the clip...

USB recovery media from Toshiba for Windows 7 doesn´t work

Hi,
Recently as my laptop Potégé was slow I reinstalled Windows without using Toshiba recovery disks. Now I can't activate Windows 7 (64 bits), so I ordered a USB recovery media from Toshiba. I tried to use it but it doesn't work. I turn off the laptop, turn it on again pressing F12, -with the USB plugged to the laptop- and when I press HDD recovery, the system just takes me to Windows as usual, without reinstalling. Any thoughts on how to reinstall?
Solved!
Go to Solution.

Hi,
Are you getting a boot option menu when you press f12? Have you tried going into BIOS to check your boot order? Usually f2 or DEL will get you to BIOS, or at the bottom of the boot option menu (which I assume is f12). Once you are in BIOS, check that your USB drive is above the others in the boot order and save your configuration and reboot. If you are still having a problem, you might check to see how many USB devices you have plugged in, or chained, and remove the ones that are not necessary because they could interfere with booting to your USB drive. If you are using a USB hub, you might try putting the usb key into a different slot to give it priority over the other USB devices on boot up. The highest priority slot on a USB hub might be the one closest to the USB cable that plugs in to your laptop's USB port.

[SOLVED]Xorg 1.8 doesn't work

Hello, I've just upgraded to linux-firmware and the newest X.org, which doesn't work.
Xorg.0.log tells me:
[ 934.318]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[ 934.322] X Protocol Version 11, Revision 0
[ 934.323] Build Operating System: Linux 2.6.33-ARCH x86_64
[ 934.325] Current Operating System: Linux staerseus 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 934.326] Kernel command line: root=/dev/disk/by-uuid/727c4683-ee4c-4b32-8a59-370264cb7d9f ro i915.modeset=1 init=/sbin/bootchartd
[ 934.327] Build Date: 26 May 2010 07:50:07PM
[ 934.329]
[ 934.330] Current version of pixman: 0.18.2
[ 934.331] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 934.334] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 934.338] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 21 10:15:38 2010
[ 934.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 934.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 934.343] (==) No Layout section. Using the first Screen section.
[ 934.343] (==) No screen section available. Using defaults.
[ 934.343] (**) |-->Screen "Default Screen Section" (0)
[ 934.343] (**) | |-->Monitor "<default monitor>"
[ 934.343] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 934.343] (==) Automatically adding devices
[ 934.343] (==) Automatically enabling devices
[ 934.343] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 934.343] Entry deleted from font path.
[ 934.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 934.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 934.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 934.343] (II) Loader magic: 0x7ce880
[ 934.343] (II) Module ABI versions:
[ 934.343] X.Org ANSI C Emulation: 0.4
[ 934.343] X.Org Video Driver: 7.0
[ 934.343] X.Org XInput driver : 9.0
[ 934.343] X.Org Server Extension : 3.0
[ 934.352] (--) PCI:*(0:0:2:0) 8086:2a42:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 934.352] (--) PCI: (0:0:2:1) 8086:2a43:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2100000/1048576
[ 934.352] (II) Open ACPI successful (/var/run/acpid.socket)
[ 934.352] (II) LoadModule: "extmod"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 934.352] (II) Module extmod: vendor="X.Org Foundation"
[ 934.352] compiled for 1.8.1, module version = 1.0.0
[ 934.352] Module class: X.Org Server Extension
[ 934.352] ABI class: X.Org Server Extension, version 3.0
[ 934.352] (II) Loading extension MIT-SCREEN-SAVER
[ 934.352] (II) Loading extension XFree86-VidModeExtension
[ 934.352] (II) Loading extension XFree86-DGA
[ 934.352] (II) Loading extension DPMS
[ 934.352] (II) Loading extension XVideo
[ 934.352] (II) Loading extension XVideo-MotionCompensation
[ 934.352] (II) Loading extension X-Resource
[ 934.352] (II) LoadModule: "dbe"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 934.352] (II) Module dbe: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension DOUBLE-BUFFER
[ 934.353] (II) LoadModule: "glx"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 934.353] (II) Module glx: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (==) AIGLX enabled
[ 934.353] (II) Loading extension GLX
[ 934.353] (II) LoadModule: "record"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 934.353] (II) Module record: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.13.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension RECORD
[ 934.353] (II) LoadModule: "dri"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 934.353] (II) Module dri: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension XFree86-DRI
[ 934.354] (II) LoadModule: "dri2"
[ 934.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 934.354] (II) Module dri2: vendor="X.Org Foundation"
[ 934.354] compiled for 1.8.1, module version = 1.2.0
[ 934.354] ABI class: X.Org Server Extension, version 3.0
[ 934.354] (II) Loading extension DRI2
[ 934.354] (==) Matched intel as autoconfigured driver 0
[ 934.354] (==) Matched vesa as autoconfigured driver 1
[ 934.354] (==) Matched fbdev as autoconfigured driver 2
[ 934.354] (==) Assigned the driver to the xf86ConfigLayout
[ 934.354] (II) LoadModule: "intel"
[ 934.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.354] (II) Module intel: vendor="X.Org Foundation"
[ 934.354] compiled for 1.7.6, module version = 2.11.0
[ 934.354] Module class: X.Org Video Driver
[ 934.354] ABI class: X.Org Video Driver, version 6.0
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)
[ 934.356] (II) UnloadModule: "intel"
[ 934.356] (II) Unloading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.356] (EE) Failed to load module "intel" (module requirement mismatch, 0)
[ 934.357] (II) LoadModule: "vesa"
[ 934.357] (WW) Warning, couldn't open module vesa
[ 934.357] (II) UnloadModule: "vesa"
[ 934.357] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 934.359] (II) LoadModule: "fbdev"
[ 934.359] (WW) Warning, couldn't open module fbdev
[ 934.359] (II) UnloadModule: "fbdev"
[ 934.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 934.360] (EE) No drivers available.
[ 934.362]
Fatal server error:
[ 934.364] no screens found
[ 934.365]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 934.370] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 934.372]
What does the problem with modules mean? Archlinux was warning me, that "in future releases /etc/modprobe.d/framebuffer_blacklist.conf.save will be ignored, but it is the same file as /etc/modprobe.d/framebuffer_blacklist.conf.
I don't understand, why it cannot find any screens (I use a laptop screen)
I tried to start with and without xorg.conf, which is:
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
The graphic driver I use is xf86-video-intel-newest from archstuff, but it is the same version as xf86-video-intel.
I am not sure if I provided all needed info, but I hope so. Thank you for your help.SOLVED
Last edited by Staerseus (2010-06-21 09:18:03)

Use the arch version. It is actually built against the xorg version that you are using... here is the relevant section of your log:
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)

On iPhone 5S compass, level, parallax effect doesn't work properly.

I'm using iOS 7.0.2 on iPhone 5S. I recently opened compass app, calibrated it and the compass doesn't move. Restarted, reset, and even restored but doesn't work. But on iPhone 5 (7.0.2) it worked. Next I swiped to level feature it worked, but when I placed it on a straight table it showed "-6" reading, while iPhone 5 showed "0" ( latter is correct ). After that I checked the new dynamic ( bubbles ) wallpaper. When I move iPhone 5S they move but in between they start getting stuck, but on iPhone 5 they worked smoothly. I hope that it's a software issue/glitch and Apple will solve it soon.

I have the exact same issue - I have posted a question only this morning. I am reluctant to do a complete restore on my 5S but turning off on normally works and I can't keep doing that. I noticed though that it only stops working after I've made a call. It works intermittently though. 10 minutes ago it stopped working after I made a call. Just checked it now and it's working again?! My compass appears to be working (it also goes green when level but don't know if this i normal or not as I never use the compass anyway).
Wonder what could be causing it especially on the newer phones?

Crystal Report 13 with WPFon Windows XP doesn't work

Hy everybody,
I develop a Wpf application FrameWork 4.0 on Windows 7 64 bit with VS 2010 and Cr 13.
On my machine, no problem with Crytal Report
When I deploy my application on a Windows 7 32 bit : no problem with my crystal reports
When I deploy my application on a Windows XP 32 bit : the crystal reports doesn't work.
When the code arrive to rpt.SetDataSource or rst.SetParameterValue, my application close without any error message.
Strange : I deploy my application on 3 XP. On 2 XP, just after de deployement It has work (two times it has show the report) but then the application close. Uninstall all and reinstall, it has never worked again.
Some help please
Regards
Gridin

See if [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] tells you anything
Use [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] to compare the runtimes.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

[SOLVED] External USB mouse doesn't work

I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
Last edited by avli (2011-07-14 16:53:15)

Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
Hope this information will be helpful for users who probably faced with the same problem. Thank you!

[SOLVED]kdeplasma-applets-menubar doesn't work.

I've just installed the following applications:
kdeplasma-applets-menubar,
libdbusmenu,
libdbusmenu-qt,
appmenu-gtk,
appmenu-qt.
But kdeplasma-applets-menubar doesn't work on my KDE4.10. The menu still show in the window and the applet only has the onmipresent "File" menu.
Last edited by mert (2013-06-22 14:22:20)

Go to 'System Settings' -> 'Application Appearance' -> 'Style' -> 'Fine Tuning' and change 'Menubar style' to 'Only export'. Just checked, works fine with qt applications.
I'm not sure about gtk apps, though. I recall reading somewhere that, in addition to installing appmenu-gtk and its dependencies, one needed to specify something in the .gtkrc and/or .config/gtk-3.0/settings.ini file(s). Well that or my memory might just be playing tricks on me.
EDIT:
If for some reason gtk apps refuse to export their menus, you might want to look at this webupd8 article. Good luck!
Last edited by andy_v (2013-06-22 12:36:50)

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

[SOLVED] Highlight Window effect doesn't work

Similar Messages

Maybe you are looking for