[SOLVED] HOW to install CATALYST drivers?

I decided that its time for me to install some catalyst drivers for my ATI RADEON 3200 card, I've found them in AUR, after I made a package I tried to install but this is what I saw:
pacman -U catalyst-utils-11.5-2-x86_64.pkg.tar.xz
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils and libgl are in conflict. Remove libgl? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: ati-dri: requires libgl=7.10.2
My libgl was 7.10.2-2 version, so it should be ok, but why pacman says its in conflict and then it says that this package is needed? lol! this is very amusing to say the least.
Last edited by tasty_minerals (2011-05-21 18:05:54)

I followed these instructions for the stock kernel:
https://wiki.archlinux.org/index.php/ATI_Catalyst
Had to remove ati-dri xf86-video-ati and libgl
It may be worth printing the page first, I have successfully
installed, so hope you can too.

Similar Messages

  • Troubles installing catalyst drivers

    Hi
    I have given up having overheating graphics cards, and have decided to switch to the proprietary catalyst drivers for my dual radeon 6870 cards. However, every time I try to install them, something goes wrong and X ends up breaking, or dbus-launch does not work, or whatever.
    I have been following the instructions on the arch wiki, and have been using the method where I add the [catalyst] repository to my pacman.conf file.
    For my fifth attempt at installing them, I have decided to ask for other peoples assistance. Can someone please give me a step by step guide for how to install the drivers, configure them correctly, and add whatever I need to add to my rc.conf to get the modules to start correctly. Basically, could someone please tell me everything I need to know in order to correctly set up the catalyst drivers. The fantastic arch wiki does not seem to help me in this case...
    Thanks in advance,
    James

    *face-palm* Wow, I really feel like an idiot now!
    Thanks earsplit, I actually did not notice that section! I thought, in my rush to get X working, that installing the drivers would be all that is necessary! I must have been accustomed to merely installing the xf86-video-ati driver and forgetting about it.
    I think my problems have been solved now. I believe my issues stemmed from not blacklisting the radeon module, and not loading the fglrx module! I think it works now.
    One last question, before I shut up:
    in my /etc/X11/xorg.conf file, there is a section which, by default, reads:
    Section "Module"
    EndSection
    I added load "fglrx" to it, meaning mine now looks like this:
    Section "Module"
    load "fglrx"
    EndSection
    Is that all I need to add? Am I missing something? Do I even need to add that at all?
    Thanks guys, once this is sorted, I will mark this as solved!
    James

  • I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

    I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
    Please help me how to install mac drivers for windows7 64 bit???

    You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
    General Help:
    Boot Camp 4.0, OS X Lion: Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Installation Guide   Instructions for all features and settings.
    Boot Camp 4.0 FAQ   Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ   Answers to commonly asked Windows 7 questions.
    - support articles and tips, how to.
    http://www.apple.com/support/bootcamp/
    Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
    http://support.apple.com/kb/HT1846
    Step 4: Install the Boot Camp Drivers for Windows
    After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc.  The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard. 
    The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
    To install the Boot Camp drivers:
    1 Eject the Windows installation disc.
    2 Insert the Mac OS X disc.  If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
    3 Follow the onscreen instructions.
    If a message appears that says the software you’re installing has not passed Windows  Logo testing, click Continue Anyway.
    Windows that appear only briefly during the installation don’t require your input.
    If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
    Important: Do not click the Cancel button in any of the installer dialogs.
    4 After your computer restarts, follow the instructions in the Found New Hardware  Wizard to update your software drivers (Windows XP only).
    5 Follow the instructions for any other wizards that appear.
    6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
      If You Have Problems Installing the Device Drivers 
    If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
    To repair Boot Camp drivers:
    1 Start up your computer in Windows.
    2 Insert your Mac OS X installation disc.
    3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
    4 Click Repair and follow the onscreen instructions.
    If a message appears that says the software you’re installing has not passed Windows  Logo testing, click Continue Anyway. 
    If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
    Individual drivers are in the Drivers folder on the Mac OS X installation disc.

  • How to install ODBC Drivers in Oracle

    Hello All,
    I want to install ODBC Drivers (from Oracle vender, Not from the DataDirect ).
    I have downloaded the ODBC Drivers for Sparc( from official Oracle website) but while installation it is asking for DriverManagers Installtion..
    Where Can I get this Driver Manager........
    Please help me how to install ODBC Drivers on Unix platforms....
    Sridhar.

    Please help me how to install ODBC Drivers on Unix platforms....You should be able to install them as a component of your client (or server) installation. Just use the Oracle Installer to add them.
    ~Jer

  • How to install jdbc drivers

    hai how to download jdbcdrivers and how to install these drivers.please give solution

    gnomeom wrote:
    Hello friend.
    You need to install MS-SQL in ur pc.
    And then u can find the driver.
    After install u need to do this
    For example
    u need to press windows key and R.
    then u need to type. odbcad32Complete and utter useless drivel and garbage.
    I have no idea what would possess someone, who obviously knows nothing about what is being discussed, to use their very first forum post to post such tripe.
    Just garbage. All of it.
    This is JDBC we are talking about. Not ODBC. There are other serious errors too but that's your biggest one.

  • How to install printer drivers for monarch

    Dear Friends,
    I got requirement where users are going to use new printer for Bar code printing.
    Kindly suggest on how to install printer drivers in SAP.
    regards
    Jiggi

    Hi,
    In tcode SPAD, goto "Utilities --> For device types --> Import".
    There are specific notes regarding specific manufactures, search the SAP portal for notes in application area BC-CCM-PRN-DVM.
    Check SAP Note 8928 for a start.
    Regards,
    Muralidhar

  • How to install printer drivers....

    HI
             Can any body  tell me about how to install printer drivers. In my case standard drivers(sapwin,swin ..etc) are not supporting. printer drivers are available in Manufacturer site . Can any body please suggest how to install the drivers.
    Please give me the steps ,
    Message was edited by:
            venkateshwarlu veeramalla

    You will need to create separate device types for each printer family installed at your installation or if each printer family require either simplex or duplex printing.
    1. Go to ‘Spool Administration screen’ by using transaction code SPAD from the initial screen of SAP.
    2. From the SPAD screen choose menu path Utilities-->for device types --> IMPORT (or you can run RSTXSCRP program from SE38, too).
    3. In the initial screen of “SAPscript Export to Dataset/SAPscript Import from Dataset” enter the following:
    a) Check Radio button for device type.
    b) In the Object Name field enter object name of the device type file (please see the table at the end of this document for object names)
    c) MODE must be IMPORT
    In the Ctrl parameters for file operation
    d) Check radio button for "From/on frontend" ( Generally this would be the default)
    That's it. Don't enter anything else. Execute by clicking execute button or function key F8.
    4. In the “Create Object Directory Entry” window that pops up, enter your development class and press enter
    5. You will get a pop up Window “Import from a Local File”. Browse through the Window to enter the filename in your local directory and click ‘Transfer’ button.

  • [SOLVED] How to install nvidia 285.05.09-3 drivers

    Hi All,
    Currently I have installed xf86-video-nouveau 0.0.16_git20110829-1 drivers in my Arch Linux but I would like to install nvidia 285.05.09-3 in kernel 3.1.1-1-ARCH.
    Each time I have tried to install nvidia drivers I have had a lot of problems: the worst is that once installed I reboot system and X does not start, screen goes black, etc so I am afraid to install it because then I have a lot of problems to goes back nouveau and to get X starts again.
    So could anyone say me step by step how to install it with success and that once I reboot my system you ensure me X starts?
    And a step by step guide in case X does not starts and I need to come back nouveau again and start X normaly without problems.
    Thx.
    Last edited by toni (2011-11-16 23:34:31)

    karol wrote:
    /dev/zero wrote:What did your last slave die of?
    Epic!
    <donkey-style "laughter">
    @toni
    Did you install the nvidia 285 drivers from the repos? Have you tried https://wiki.archlinux.org/index.php/Nv … au_drivers ?
    Can you post some logs when the nvidia drivers are failing? What card do you have?
    Hi Karol,
    I have just installed nvidia 285 from repos taking into account the link you provided. I follow the steps mentioned in the script to change from nouveau to nvidia and it went Ok. Now I have installed nvidia drivers from repos and at boot-up, X starts correctly (SOLVED).
    I think when I installed nvidia in the past one thing was missed: (I did not do this)
    /usr/bin/sudo /sbin/mkinitcpio -p linux
    ....Maybe that was the problem.
    My graphic card is Nvidia Go7600.
    Thx again
    Last edited by toni (2011-11-16 23:34:04)

  • How to install additional drivers on shared priter

    Dear Users......i have some confusions about installing printer drivers on a network printer......
    Question 1.
    i have a pc with O/S windows xp and printer is attached with it and shared on the network. now one pc with O/S win7 (64-bit) has been added the network what is the best ways to install the printer for this PC.
    1...i should manually install the printer driver on win7 PC or...? OR
    2...i should add the additional driver on that Win xp PC with whom printer is directly attached...?
    3... as i told that xp pc is 32 bit how can i add a 64 bit driver using ..additional drivers...?
    Question 2.
          when we add printer from the devices and printers what does this means get driver from windows update ...?
          most of the times when we download the driver it is in an exe file and when we choose have disk for the driver it     
          ask for the .inf file...?
          Thanks for all of you. Thanks for Microsoft for providing such a useful platform.....
    Tahir Mehmood

    You wont be able to use exiting Win XP drivers on windows 7. You need to get new drivers for Windows 7, and install them as per your convenience, ie manually or automate it via script GP
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • [SOLVED] How to install and run (on debian) a separate, downlevel version of firefox for the F5/firepass VPN?

    (Note: my problem is similar to [https://support.mozilla.org/en-US/questions/931534?e=es&as=aaq another current problem] except that
    * OP is running windows (I'm running a debian linux)
    * OP is asking a more general question (how to fix?) while I'm asking for details on a proposed fix)
    I'm currently running
    $ lsb_release -ds
    Linux Mint Debian Edition
    $ cat /etc/debian_version
    wheezy/sid
    $ uname -rv
    3.2.0-2-amd64 #1 SMP Sun Mar 4 22:48:17 UTC 2012
    $ iceweasel --version
    Mozilla Iceweasel 13.0.1
    I'd like to continue running an uplevel iceweasel ([http://en.wikipedia.org/wiki/Mozilla_Corporation_software_rebranded_by_the_Debian_project which is firefox]) but apparently need to run a downlevel version in order to run a particular vendor-supplied plugin. How best to do that (i.e., with minimal performance degradation, and without affecting my package management)? Or is there another way to solve the general problem (running the F5 Network Access Plugin)? Why I ask:
    My employer is giving me remote access via a SecurID token and the F5 Network Access Plugin (F5NAP). The latter is in fact a browser plugin, which seems to me an odd way to implement a VPN, but it's the only offered option. Unfortunately,
    * the only browsers supported for linux are Firefox 3 and Firefox 8 (per [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html this]--scroll to "Linux Operating Systems")
    * my primary laptop runs LMDE (see above) with Iceweasel 13 (from the mozilla.debian.net repository), which I want to keep. (It's the uplevel browser, dammit !-)
    So I first tried to install the F5NAP on my iceweasel, hoping it was sufficiently like the listed versions. I browsed to my employer's site, logged in using the token, and followed the link to install the plugin. Unfortunately, that failed: the xpi began running, but then quit with the message
    > F5 Network Access Plugin could not be installed because it is not compatible with Iceweasel 13.0.1
    Hoping for a simple workaround, I told the often-useful User Agent Switcher plugin to emulate Firefox 8, but no fix. Hence it seems like I will hafta
    * install Firefox 3 or Firefox 8
    * run that downlevel browser whenever I want remote access
    * run the uplevel browser for everything else
    This definitely seems like a kludge, so I am open to alternatives. Meanwhile I'm wondering:
    # Which of the F5-supported downlevel browsers (Firefox 3 or Firefox 8) has the smaller memory footprint?
    # How to install the downlevel browser so that it does not interfere with my uplevel browser's configuration, operation, and updating via debian package management?
    # How to run the downlevel browser so that its operation does not interfere with my uplevel browser? I know firefox typically wants to run singleton.

    @[https://support.mozilla.org/en-US/user/160087 verdi]: thanks for your helpful suggestions. The "fix" (actually a kludge, but I gotta work with what F5 and my employer give me) was:
    # Install/run latest Firefox 3 (despite there being [https://support.mozilla.org/en-US/questions/932269 no 64-bit version for linux]) using [https://docs.google.com/open?id=0BzDAFHgIxRzKbmJDUGZqTzhfbDg this bash scriptlet].
    # Create a [https://docs.google.com/open?id=0BzDAFHgIxRzKQjRyQndqUTJpRXM run script] to start firefox so that one can
    #* choose the appropriate profile (I was unable to set it from the script without startup error)
    #* run multiple instances (I don't want 3.x firefox touching my uplevel profile)
    # Run Firefox 3.x with the runner, then point it to my employer's site to install the [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html F5 Network Access Plugin] (restarting firefox as required).
    The gnome-terminal tab from which I invoke the runner spews a bazillion "wrong ELF class: ELFCLASS64" errors, but the plugin runs, and I can SSH normally (though more slowly) to servers on the VLAN from another terminal tab.

  • How to install BootCamp5 drivers for Windows 8?

    I have a Mac mini and have installed Windows 8 (64-bit) using Bootcamp. It works fine, but I hear that you should install some drivers. I downloaded them from the apple support website and put them on a usb flashdrive that uses the format "MS-DOS (FAT)".
    When I double-click "setup.exe", I get "This app can't run on your PC". When I run as admin it says that it can't find "D:\BootCamp\setup.exe".
    It may be worth mentioning that my mac is also running as a server (using the Mac OS X Server app).
    How do I fix this?
    Let me know if you need any more info...

    Finally, the solution! I just had to use another flashdrive. If anybody has this problem, all you have to do is just change flashdrive. In my case the pdf files were corrupted when transferred to the flashdrive, using disk utility seemed to remove most of the folders, and many other files were "broken" as well,  so change the flashdrive and it should work!

  • How to install unix drivers for Olympus MAUSB smartmedia reader

    I want to use my Olympus "Camedia" MAUSB-2 smartmedia card reader. I have downloaded a coupl eof drivers from the web
    USBDSSFDCReaderDriver
    USBSSFDCReaderShim
    These show up as Unix Executables in the Finder
    I have no idea how to install them. Can anyone help?

    Where did you find these files?
    I can't find any support for MAUSB-2 under Mac OS X?
    The only drivers I can find on Olympus' site are for Mac OS (not Mac OS X) and date from 2000 (which predates Mac OS X). Mac OS drivers won't work on Mac OS X.
    That said, I've never had to install any driver for any card reader I've used. Are you sure you need one?

  • How to install ODBC drivers ALONE in OUI?

    Hi, I need to install ODBC drivers in oracle clients, so I choose "Customized" installation and then the "Oracle Windows Interfaces" component. However, OUI will also try to intall the Microsoft Transaction Server component under the previous mentioned node, and also "Oracle Object for OLE" and "Oracle Provider for OLE DB".
    The question is: how can I install the ODBC drivers ALONE? I want to keep my clients with the minimal possible installation.
    Thank you in advance.
    Leandro.

    Have you looked at the 10g Instant Client? That's going to be a lot smaller and a lot easier to install.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Z360 - How to install NVIDIA drivers and enable Optimus on Ubuntu 13.04

    Hello,
    I moved to use Ubuntu on my Z360 laptop. I installed Ubuntu 13.04.
    But I have a problem with NVIDIA drivers. I tried to download it from NVIDIA website and install it but it brings a lot of problems.
    The resolution of desktop switched to very low and OpenGL cannot start - all dialogs hasn't title panel, desktop without panels.
    Please, can somebody explain how can I install NVIDIA drivers and enable Optimus on my Z360?

    I am not sure if Nvidia supports 13.04 because it is still in the Beta stage?
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • How to install bootcamp drivers without installation disk?

    iam using my friends macbook (intel core2Duo 1.83 GHZ, 80GB, 1GB DDRII, 12"", white colour)Mac OS X 10.5.7 installed, and i hav'nt installtion disk, and i want to install windows on it, but how will i be able to install bootcamp drivers as i have'nt installtion disc.

    Look as a part of right click-2fingers at a same time you should press on the touchpad.
    and check your macbook,the slot where you put the speakers wire if the drivers are not install then a red light will come from it and if not then it means that the drivers are all install.
    and try to install the drivers from http://support.apple.com/downloads/#bootcamp
    Hope your problem get resolved.

Maybe you are looking for