[SOLVED] How to install wine on x86_64

Hey guys!
I have been wanting to install wine on my 64-bit computer, but I am having a problem. On the wiki it says that all I need to type in is:
pacman -S wine
and the constantly updated community repository will have it, but every time I try it says that it does not exist. I looked through the AUR and Im not sure which package to install for wine. Help would be much appreciated! Thank You!
Last edited by mag1strate (2010-08-01 14:42:23)

Cool, I looked at this and found out it wasn't the mirror, I just haven't updated the lists. Once I did It found the wine package! Thank You for your quick response!

Similar Messages

How to install win 8.1 pro x64 on MBA mid 2013 (core i7)

Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
Thank you very much for your help.
Best regards.

Everything you need to help you is located here: http://www.apple.com/support/bootcamp/

How to install win on macbook pro

version 10.4.11,can you show me how to install win xp ?

You posted in the wrong forum. I asked the host to move your thread to the correct forum.
Allan

How to install Win 7 on Mac using USB flash drive....???

How to install Win 7 on Mac using USB flash drive....???

clintonfrombirmingham wrote:
I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
Maybe some real Boot Campers will visit this thread...
Clinton
If you have the Media you can use it to create a bootable USB key via boot camp assistant.
It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
It is pretty much all automated and quite simple.

[SOLVED] How to install and run (on debian) a separate, downlevel version of firefox for the F5/firepass VPN?

(Note: my problem is similar to [https://support.mozilla.org/en-US/questions/931534?e=es&as=aaq another current problem] except that
* OP is running windows (I'm running a debian linux)
* OP is asking a more general question (how to fix?) while I'm asking for details on a proposed fix)
I'm currently running
$ lsb_release -ds
Linux Mint Debian Edition
$ cat /etc/debian_version
wheezy/sid
$ uname -rv
3.2.0-2-amd64 #1 SMP Sun Mar 4 22:48:17 UTC 2012
$ iceweasel --version
Mozilla Iceweasel 13.0.1
I'd like to continue running an uplevel iceweasel ([http://en.wikipedia.org/wiki/Mozilla_Corporation_software_rebranded_by_the_Debian_project which is firefox]) but apparently need to run a downlevel version in order to run a particular vendor-supplied plugin. How best to do that (i.e., with minimal performance degradation, and without affecting my package management)? Or is there another way to solve the general problem (running the F5 Network Access Plugin)? Why I ask:
My employer is giving me remote access via a SecurID token and the F5 Network Access Plugin (F5NAP). The latter is in fact a browser plugin, which seems to me an odd way to implement a VPN, but it's the only offered option. Unfortunately,
* the only browsers supported for linux are Firefox 3 and Firefox 8 (per [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html this]--scroll to "Linux Operating Systems")
* my primary laptop runs LMDE (see above) with Iceweasel 13 (from the mozilla.debian.net repository), which I want to keep. (It's the uplevel browser, dammit !-)
So I first tried to install the F5NAP on my iceweasel, hoping it was sufficiently like the listed versions. I browsed to my employer's site, logged in using the token, and followed the link to install the plugin. Unfortunately, that failed: the xpi began running, but then quit with the message
> F5 Network Access Plugin could not be installed because it is not compatible with Iceweasel 13.0.1
Hoping for a simple workaround, I told the often-useful User Agent Switcher plugin to emulate Firefox 8, but no fix. Hence it seems like I will hafta
* install Firefox 3 or Firefox 8
* run that downlevel browser whenever I want remote access
* run the uplevel browser for everything else
This definitely seems like a kludge, so I am open to alternatives. Meanwhile I'm wondering:
# Which of the F5-supported downlevel browsers (Firefox 3 or Firefox 8) has the smaller memory footprint?
# How to install the downlevel browser so that it does not interfere with my uplevel browser's configuration, operation, and updating via debian package management?
# How to run the downlevel browser so that its operation does not interfere with my uplevel browser? I know firefox typically wants to run singleton.

@[https://support.mozilla.org/en-US/user/160087 verdi]: thanks for your helpful suggestions. The "fix" (actually a kludge, but I gotta work with what F5 and my employer give me) was:
# Install/run latest Firefox 3 (despite there being [https://support.mozilla.org/en-US/questions/932269 no 64-bit version for linux]) using [https://docs.google.com/open?id=0BzDAFHgIxRzKbmJDUGZqTzhfbDg this bash scriptlet].
# Create a [https://docs.google.com/open?id=0BzDAFHgIxRzKQjRyQndqUTJpRXM run script] to start firefox so that one can
#* choose the appropriate profile (I was unable to set it from the script without startup error)
#* run multiple instances (I don't want 3.x firefox touching my uplevel profile)
# Run Firefox 3.x with the runner, then point it to my employer's site to install the [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html F5 Network Access Plugin] (restarting firefox as required).
The gnome-terminal tab from which I invoke the runner spews a bazillion "wrong ELF class: ELFCLASS64" errors, but the plugin runs, and I can SSH normally (though more slowly) to servers on the VLAN from another terminal tab.

How to install Win XP on Equium P200

Hi guys,
I found a very usefull tutorial how to install windows xp onto Equium P200 laptop.
Problem is that when I have done everything whats in that tutorial (used nlite, made xp install cd with sata drivers) Win Xp is showing error.
When u boot from cd, and all the drivers are loaded it will show me a blue screen saying that the installation was stopped to prevent damage to my pc, and its saying that the error is in file pci.sys ...
Any ides what it could be?
Thanks in advance

Hi
Im not 100% sure why this error appears but Ive got one idea.
Possibly the installed Intel Matrix Storage Manger doesnt support the right chipset.
Ive tow different Intel Matrix Storage Manger versions and both versions support different chipsets.
Fact is that different Equium P200 series exist which needs different drivers.
I think you should visit the Toshiba European driver page and should choose the right notebook series! Please compare the series number which can be found at the bottom of the unit!!!
Then try the installation again!

Windows XP Not Installing Sug me how to Install Win XP

How to Install Windows XP my HP laptop model HP 15-G221AU , windows XP installing HDD partition time then my laptop shut down how to solve it ?

Hi
Im not 100% sure why this error appears but Ive got one idea.
Possibly the installed Intel Matrix Storage Manger doesnt support the right chipset.
Ive tow different Intel Matrix Storage Manger versions and both versions support different chipsets.
Fact is that different Equium P200 series exist which needs different drivers.
I think you should visit the Toshiba European driver page and should choose the right notebook series! Please compare the series number which can be found at the bottom of the unit!!!
Then try the installation again!

How to instal Win 7 on Satellite P300?

I have a laptop Toshiba Satellite P300. When I bought it I had on it Vista family premium. Now I wanted to install Win 7.
I have the DVD of Win 7 professional but when I want to boot from the win 7 DVD it wouldnt accept and the pc boot always from the hard disk even when I changed it on the BIOS like it doesnt recognise it. I tried with other Win 7 DVD to format the hard disk and install the win 7 like the normal procedure but Toshiba doesnt recognise any Win 7 DVD, it recognise only its original system DVD (the hddrecovery files which combines the win vista and all Toshiba laptop drivers as u know).
So how to do to format the pc and install Win 7 (if u run the setup of win 7 from the computer I can install Win 7 but I cant format the pc and I keep always the old files and I dont like) so please help me if you have a solution for that thank you!!

yes i have the original microsoft win 7 dvd,but when i choose from bios to boot from the dvd to start format the hard disk and then instal win 7 like the ordinary procedure the system doesnt recognise any win 7 dvd ( i tried with other dvd ) and start directly from the hard disk,but for example if i try with a win xp dvd ,then it work and the system recognise the dvd and boot from it ans start formating etc..it happens only with win 7 dvd ,so what to do?

[SOLVED] How to install Image magick extension for php?

As in topic, how to install imagick extension for php (xampp)? I tried with pecl, i installed pear first and imagick with "pecl install imagick". I added extension to php.ini file (/opt/lampp/etc/php.ini) but when i try to start xampp, i get error:
Warning: PHP Startup: Unable to load dynamic library '/opt/lampp/lib/php/extensions/no-debug-non-zts-20090626/imagic.so' - /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626/imagic.so: cannot open shared object file: No such file or directory in Unknown on line 0
What should i do?
Last edited by smiechowy (2011-03-06 12:23:55)

it was installed in /usr/lib/php/modules/ I copied imagic.so to /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626/ but it still don't work ;/
Edit: problem solved, i made a mistake adding "imagic.so" in php.ini instead of "imagick.so".
Last edited by smiechowy (2011-03-06 12:23:39)

[SOLVED] How to install nvidia 285.05.09-3 drivers

Hi All,
Currently I have installed xf86-video-nouveau 0.0.16_git20110829-1 drivers in my Arch Linux but I would like to install nvidia 285.05.09-3 in kernel 3.1.1-1-ARCH.
Each time I have tried to install nvidia drivers I have had a lot of problems: the worst is that once installed I reboot system and X does not start, screen goes black, etc so I am afraid to install it because then I have a lot of problems to goes back nouveau and to get X starts again.
So could anyone say me step by step how to install it with success and that once I reboot my system you ensure me X starts?
And a step by step guide in case X does not starts and I need to come back nouveau again and start X normaly without problems.
Thx.
Last edited by toni (2011-11-16 23:34:31)

karol wrote:
/dev/zero wrote:What did your last slave die of?
Epic!
<donkey-style "laughter">
@toni
Did you install the nvidia 285 drivers from the repos? Have you tried https://wiki.archlinux.org/index.php/Nv … au_drivers ?
Can you post some logs when the nvidia drivers are failing? What card do you have?
Hi Karol,
I have just installed nvidia 285 from repos taking into account the link you provided. I follow the steps mentioned in the script to change from nouveau to nvidia and it went Ok. Now I have installed nvidia drivers from repos and at boot-up, X starts correctly (SOLVED).
I think when I installed nvidia in the past one thing was missed: (I did not do this)
/usr/bin/sudo /sbin/mkinitcpio -p linux
....Maybe that was the problem.
My graphic card is Nvidia Go7600.
Thx again
Last edited by toni (2011-11-16 23:34:04)

[Solved] How to install yajl 2.0 and reinstall yaourt?

I had yaourt with yajl 1.0, but somehow got deleted. My fault.
I had used yaourt, even if it asked for yajl>=2.0 and installed packages from AUR.
Now I cannot install yaourt, as it asks for yajl>=2.0
I can only install yajl 1.0.11-3, as pacman/kpackagekit won't find yajl 2.0.1-0, so I downloaded the tar.gz file, but don't know how to install it.
This is the zip file; lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz and its in the Home directory.
What should I do to install this, so I can install yaourt again?
Thanks!
Last edited by Ariya (2011-09-24 15:31:54)

There is no PKBUILD.
Once extracted, went into the directory
$ cd lloyd-yajl-f4b2b1a, then
$ ./configure && make install
finally,
58/58 tests successful, but;
Install the project...
-- Install configuration: "Release"
-- Installing: /usr/local/lib/libyajl.so.2.0.1
CMake Error at src/cmake_install.cmake:48 (FILE):
file INSTALL cannot copy file
"/home/ariya/builds/lloyd-yajl-f4b2b1a/build/yajl-2.0.1/lib/libyajl.so.2.0.1"
to "/usr/local/lib/libyajl.so.2.0.1".
Call Stack (most recent call first):
cmake_install.cmake:37 (INCLUDE)
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/ariya/builds/lloyd-yajl-f4b2b1a/build'
make: *** [install] Error 2
So, I copied /home/ariya/builds/lloyd-yajl-f4b2b1a/build/yajl-2.0.1/lib/libyajl.so.2.0.1" to "/usr/local/lib/libyajl.so.2.0.1
But, there is no yajl-2.0.1 installed.
The build directory containst the following; CMakeCache.txt CMakeFiles cmake_install.cmake example Makefile perf reformatter src test verify yajl-2.0.1
What have I done wrong?
Thanks!

How to install win 7 in my G500

Hi dear
Today i bougth the Lenovo g500 notebook and i format all of that drives when i want to install win 7 it say "windows can not be installed to this disk the computers hardware may not support booting to this disk .ensure that the disk's controller is enabled in the bios menu
And also i set these settings before that
Sata controller mode: compatible
Boot mode:lagecy support
Boot priority lagecy firs and boot security off
Help me fast please

hi hamedh20,
Welcome to Lenovo Community Forums!
You may want to check this Thread Right here, with the same concern that you have, DISKPART and clean may be the solution.
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Not-able-to-install-windows-7-in-G500/m-p/1288...
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVE] How to install this program (PyIpChanger)?

Hello!
I'm new to the forum and I wanted you to help me how to install this program.
https://otland.net/threads/pyipchanger- … ts.157953/
It is a ip changer for Tibia, to play in OT servers.
Since there does not exist in the official repositories nor in the AUR, It is necessary install manually, but I can't figure out
*Sorry my english, I'm not a native speaker.
Best wishes!
Last edited by Rearis (2015-05-10 14:52:48)

Robg told you how to do this:
robg wrote:
Just use pacman to install: pyhon2, python2-pyqt4
After having done that, you can run main.py using pyhon2.
So install the software, then run:
python2 PyIpChanger.py
Last edited by mrunion (2015-05-07 13:36:31)

Re: How to install Win XP display driver for Satellite 1800-750

How to install the video driver in my pc? Not includes .exe archive.<br /><br />The driver is Display Driver Trident Windows XP 4.12.01.2307
+Message was edited: link removed - too long+

MasterG is right. Download display driver and save all files in some folder created on the desktop.
In device manager open properties for graphic card and click on driver tab. There you will find option for driver update or driver installation.
In next step just browse into folder with saved download files and continue with next. Driver will be installed properly.

[SOLVED] how to install mingetty

$ pacman -S mingetty
error: 'mingetty': could not find or read package
so then I downloaded mingetty-1.08.tar.gz & mingetty-utf8.patch from http://aur.archlinux.org/packages.php?ID=13793
to my home/rich/Downloads folder. But how do I install it?
Last edited by dameunmate (2010-07-16 08:41:28)

Sorry about that, I had read a lot of the wiki but I had no idea how to install a package from the AUR. The console was very upset when I tried to install mingetty as the root user, so to install it as another user changing the permissions on each and every installation file took a long time. However I got there in the end. Thanks for your help.
For anyone who like myself is running Arch Linux and Openbox, in the end I didn't need mingetty to boot straight into X Openbox, so I've now uninstalled it. I only needed to folow the instructions in the Arch Wiki at http://wiki.archlinux.org/index.php/Start_X_at_boot (second section using etc/inittab).
Here's my etc/inittab:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
x:5:once:/bin/su YOUR_USERNAME_HERE -l -c "/bin/bash --login -c /usr/bin/startx >/dev/null 2>&1"
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
...the key is in the x:5:once:/bin/su YOUR_USERNAME_HERE -l -c "/bin/bash --login -c /usr/bin/startx >/dev/null 2>&1"
So now I just press the power button and end up in Openbox in about 50 seconds (for some reason my motherboard takes 30 seconds to get to the Grub menu, then as Arch boots it takes a good 10 seconds to get a wireless connection up). Press the power button again and it automatically shuts down! (see http://wiki.archlinux.org/index.php/Shu … wer_Button - I don't know if this closes X properly but anyway it works)
Last edited by dameunmate (2010-07-16 09:05:36)

[SOLVED] How to install wine on x86_64

Similar Messages

Maybe you are looking for