[SOLVED]How to load the kernel?
Hi all
First I should say that I found the same as my question in the internet bot there were no answer can solve my problem too.
I just installed my Arch on my new laptop and I can say I am new.
after all installations and reboot I have grub menu but when I want to boot I face with below error
"error no such device" ad4103....."
"loading linux core repo kernel"
"error: no such partition"
"loading initial ramdisk"
"error: you need to load the kernel first"
I have no access to command line but grub command line.
How can I get rid of this error?
Last edited by qaderzade (2014-12-12 18:57:28)
uh...post your fstab as well as your bootloader configuration. I believe your initramfs is loaded from /boot - if you have that on a separate partition you need to make sure that a) it's specified correctly with the correct device name or UUID in fstab and that b) grub picked up the correct location of your initramfs and kernel when running grub-mkconfig (I'm assuming you did run grub-mkconfig before rebooting). Hopefully I'm not too off base here, but your problem lies somewhere in that area.
Similar Messages
-
[SOLVED]How to patch the kernel? And other questions
Like the same user who started this thread I'm suffering from hibernation resuming troubles using kernel 2.6.38. In that thread was posted a soluttion that involves patching the kernel.
The patch to apply is this:
http://git.kernel.org/?p=linux/kernel/g … e3e9fc8684
Waiting for the bug to be corrected and a new version supplied is not an option, because this laptop is my main computer and I heavly rely on hibernation.
Here's my trouble now. I don't know if it is possible to patch without recompiling the whole kernel, or it has to be compiled with that patch applied. I have seen the archlinux's wiki guide about compiling the kernel, but found nothing about applying patches (maybe I didn't searched with enought depth).
In case there is needed a full compilation, should I use the vanilla kernel, the Arch Linux one or any of the AUR ones (I said AUR because they're the first that came to my mind)? Should i expect a performance gain with this (apart from fixing the hibernation bug)?
Maybe i'm just doing a bunch of dumb questions, and the only thing I need is to search deeply on the wiki. In that case, please tell me. If not, I rather get some answers around kernel patching and / or compiling questions.
Edit: In addittion, it is possible that all this questions are just newbie ones, I don't know, but as I am willing to learn from this I will appreciate any info or documentation about it.
Thank you.
Last edited by ethail (2011-04-12 06:30:48)From the source tree (/usr/src/linux-whatever) execute
patch -p1 < /path/to/fix.patch
then recompile kernel from the source tree.
Basically that consists of executing the following commands from the source tree:
make menuconfig
make
make modules_install
cp -v System.map /boot/System.map-CUSTOM
cp -v arch/x86/boot/bzImage /boot/vmlinuz-CUSTOM
mkinitcpio -k 2.6.38-CUSTOM -g /boot/kernel-CUSTOM.img
and you need to add menu entry in /boot/grub/menu.lst
-k 2.6.38-CUSTOM should corespond to /lib/modules/2.6.38-CUSTOM (replace 2.6.38-CUSTOM with the name of your module directory, name depends on the kernel version and suffix that you gave in menuconfig). Regarding kernel configuration in menuconfig - I can't help you, you could use arch stock kernel config (zcat /proc/config.gz > /usr/src/linux-whatever/.config)
I do these kind of things this way - maybe someone else have a more elegant solution. -
Unable to load the kernel module 'nvidia.ko' [SOLVED]
After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01) -
How to load the boot menu using the command line , after the configuration change ?
how to load the boot menu using the command line , after the configuration change ?
Hi @Bask-48
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are trying to change the boot order. Here is a link to Configuring the Boot Order in the System BIOS
that will assist you.
Good Luck and Happy Holidays!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
How to load the content in Combobox
Dear All,
Any one can tell me how to load the combobox dynamically.. i have one combobox in that i defined the value as "Defined New" when i click the DefineNew a new form wil come i wil enter the value in the editext. when i click the combobox the value should display.. i have done this, its working fine but the problem is every time when i add the value it wil show the data in the the form Load.. i want data should come dynamically..
any one can help me in this regard
G.shankarYou can use this "oForm.Refresh()" every time you add a new valid value to the ComboBox.
I hope this help you.
Regards.
Enriquillo Guigni -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
How to load the CategoryName, instead of CategoryID in ListView?
I have a Listview control in a Windows Form.
The listview contains 3 columns
- CategoryID
- Product Description
- Price
The question is: how to load the "Category Name", instead of "Category ID"?
Does listview support Dictonary Blinding?
Please helpHi iHandler,
As CoolDadTx said, the key part of Dictionary wouldn't be available.
If the Value part of your Dictionary is List Type, it can be binded to listView, but I suggest you using TreeView instead of ListView. Because The Dictionary type is
One to One or One to Many relationship. I can be easily binded to
TreeView for displaying the relation.
Here I make a sample you could refer to which can load the TreeView with a Dictionary.
private void LoadTreeView(Dictionary<string, List<string>> treeStatusDic)
//load Key Node
foreach (string key in treeStatusDic.Keys)
this.treeView1.Nodes.Add(key);
//load child Node
foreach (TreeNode tn in this.treeView1.Nodes)
if (treeStatusDic.ContainsKey(tn.Text))
List<string> ls = treeStatusDic[tn.Text];
foreach (string t in ls)
tn.Nodes.Add(t);
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello,
In my BI system ,i have the DSO and InfoCube ,haveing the
infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.Hello,
The procedure is as follows.
1) First run the init infopackage (either with or without data), preferably with data.
2) Then run the delta infopackage always. (it will get delta records always).
Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
And then schedule the delta.
REgds,
Shashank -
How to load the external outlines .otl
i have hyperion essbase 9.3.1.i had received external outlines.how to load the external outlines
Hi
I have bee told that simply copying the otl file can cause it to become corrupt and that the best way is to:
1. Open the file in the Admin Console using File > Open and browsing to the otl file you have been sent
2. Do a Save As and save over the existing otl file
3. Stop and restart the application
I think this is particularly if the otl file is from a different version.
Hope this helps
Stuart -
How to load the subinventories
Hi,
How to load the subinventories if i have around 200 programtically?
Note : i dont want to use data loader for it?
Regards
846691This is from MySupport:
Currently there is no API or Interface table to upload the subinventory related information.
At present there is no other option other than to use the front end application .
There is an existing enhancement request which may be released in future release.
hope this helps -
How to load the google map into an empty movieclip
how to load the google map into an empty movieclip ? Thank you
if you're using as3, check the google maps api for flash. if you're using as2, check the google maps api for javascript and use the externalinterface class in flash.
Maybe you are looking for
-
Eletronic Bank Statement.
Hi friends, I Made a Global Settings for Eletronic Bank Statement, later I use FF.5 to Import it. After transacction run this message is dilplayed: <i>"(JBA_US_GENERAL 110) Branch is required for the document type ZE."</i> In Eletronic Archive dosn't
-
Help : importing jar files
i want to access classes in a jar file.. can i import the pakage without needing to extract the class files from the jar file?? how can u use the jar file in the app that i have made??
-
Problem: apex_collection.create_collection_from_query
Hi; I've the following procedure:declare p_collection_name varchar2(1000) := 'EDIT_CAT'; begin IF (apex_collection.collection_exists(p_collection_name)) THEN apex_collection.delete_collection(p_collection_name);
-
Hi Table structure pointdescription Pointvalue evaluationfrom evalutionto a 4 01/01/2007 10/01/2007 b 3 01/01/2008 12/01/2008 a
-
Please support to remove the icloud account on my iphone
This is my story, i have a brother, he came to US 1 years ago, he go there to study, and after few months he bought an iphone 5 from a friend, and in the summer he came back to Viet Nam, and gave me that iphone, but i when i try to restore that iphon