[SOLVED] How to make sense of the Forms Client SOD Matrix ?

Hi,
We have installed 10.1.2.3 app server and are using Jinitiator version 1.3.1.28 on Windows under IE 7.
Before we did this I read the matrix, saw that IE 7 was certified with 10.1.2.2 and Jinit 1.3.1.28.
I also noted the line stating "When a client platform is certified with a specific patch release it is implicitly certified with all subsequent patch releases.".
I (and I presume thousands of others) read this to mean that because it works fine with 10.1.2.2., if we patch to 10.1.2.3 then it will be implicitly certified.
Not so according to Oracle Support ! X-( They tell me I am running an uncertified combination and must use the Sun plug-in (which we have found issues with). Can anyone from Oracle confirm that the combination i am using is OK please ?
i have replied to my TAR with support pointing out this line I have quoted above and also asking why when you patch to 10.1.2.3 and run a test form does it run Jinitiator 1.2.1.26 if it is not supposed to be supported ....
Ho hum ....:(
** Yes it is supported. I was going insane ....
Edited by: Dom on Jan 29, 2009 1:17 PM

donniezazen wrote:https://bugs.archlinux.org/task/29850#comment95791The thread that I started.
Thank you. It wasn't quite what I was looking for, but may solve why I've set up such monitoring in the first place. Installing linux-ice now to test.
@Pres
Thank you so much. That helps clear some things up, and means I can remove the load averages from my monitoring (they aren't measuring what I want to measure).
I still need to figure out the disparity between per process CPU usage and overall CPU usage, but those two were closer together anyway, so less of a worry.
I'm going to mark this thread solved.

Similar Messages

  • Re How to make shortcuts of the forms in hirarical tree

    Hi
    Is it possible to make shortcuts of the forms by using add and remove buttons i have so many forms in tree but now i want to make shortcuts of my forms can anyone guide me in this regards
    thanks in advance.
    sarah
    Edited by: user652484 on Aug 10, 2009 2:38 AM
    Edited by: SarahSarahSarah on Aug 29, 2009 11:46 AM
    Edited by: SarahSarahSarah on Sep 10, 2009 7:35 AM

    HI SIR
    I CREATED TABLE THE FOLLOWING TABLE
    CREATE TABLE SHORT
    (USER_ID VARCHAR2(10),
    FORMS VARCHAR2(20));
    TABLE CREATED.
    INSERT INTO SHORT
    (USER_ID,FORMS)
    VALUES('SARA','DEPARTMENT');
    INSERT INTO SHORT
    (USER_ID,FORMS)
    VALUES('SARA','EMPLOYEE');
    INSERT INTO SHORT
    (USER_ID,FORMS)
    VALUES('SARA','PERSONAL INFO');
    AT LEAST GUIDE ME WHERE I PUT THE QUERY I SEARCH THE "DATA QUERY" IN TEXT ITEMS I DID NOT FIND ONLY ITS AVAILABLE IN HIRARICAL TREE.SORRY FOR BOTHERING
    SARAH

  • How to make sense of the multiple photo subfolders in my iphone?

    I used to manually copy and paste newly taken photos from my iphone into my computer. Ever since I bought iphone 6, there is suddenly an onslaught of subfolders created, with seemingly no patterns how the photos and videos are sorted. I am now unable to download the photos from the iphone to my computer because i cannot find the most recent pictures taken. See screenshot of the multiple folders in my phone!
    help?!  On the related note, how does sync photos work? will that help solve my problem?
    Thank you in advance

    thank  you for the link. it is still quite confusing. Essentially, I am wondering how to continue downloading pictures/videos from the iphone to the computer, without duplicating those that already exist in my computer.
    Yes, because of the multiple subfolders in the iphone i do not know how to find the latest pictures and cannot copy and paste from my iphone to my computer. Any insights on how the subfolders are sorting my pictures will be greatly appreciated.

  • HT1438 dont i have to submit a slip before giving back in my ipod for fixing? what do i do? how do i fill in the form?

    how do i fill in the form to give back my ipod and get a new one? whats the website i go to and what do i type in? can i change the color of my ipod from black to white?

    Follow the instructions here:
    Apple - Support - iPod - Service FAQ
    I do not think you can change the color but you can ask.

  • I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

    I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

    Hi ...
    Select None for payment method > iTunes Store: Changing account information
    Be aware, an auto renewing subsciption by require a credit card.

  • Unable to create Entries in the Z Table -- Make entry in the form 9,999.999

    I have created/Copied a standard table to a z Table with 5 fields.
    One of the Field should be capbale to hold AAAAA.DDDDDDDDDDDDDD. (ie 5 Place before point and 14 decimal places).
    So I have created Domain DEC with 14 decimal places and 19 No Characters.
    When I tried creating an Table Entry(REcord), System rejects the value present in this  field wth the following
    message "Entry 12345.000000 is to long. (Make entry in the form 9,999.99999 or /9,999.99999.)".
    One more thing: I have maintained the DEcimal Notation as 1,234,567.89 in the User Defaults(TCode SU01).
    Please help !
    RJ

    Hi,
    So as you said the notaion comma is also included in the count of places.
    so try giving as1,234.00000 - shouldn't give error.
    if no error then increas the total no. of character in domain to 20 and check giving value 12,345.000000...
    Regards
    Salini.

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of the FM EDIT_TEXT_FORMAT_DOC

    Hi frnz,
    How to make use of the FM
    EDIT_TEXT_FORMAT_DOC
    Could anyone explain with an example how to use this
    regards

    hi
    I need an example please....
    did any one use that FM
    Regards

  • How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite?

    How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite? I tried re-setting the media folder location, but it didn't work. What else should I do?

    The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

  • How to make iTunes read the song's name/singer from the file's name itself?

    Hi everyone,
    So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
    So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • How to make restriction for the description of value in the transformation

    one infoobject AAAA which has value T001, T002, T003...
    the description of value
    T001 - Heywemay
    T002 - Heyrtya
    T003 - Tyuatyew
    I need to make routine in the transformation, when the description of value that contains "Hey", then we need to load it into infoprovider, otherwise we need to delete data package. Now the issue is  the filed in source is only Key, not description. But, we had maintained the description for infoobject AAAA. Anyboady know how to make restriction in the transformation, ?
    that means we only need to load data into infoprover once the description of value that contains "Hey". Should I add field 0TXTMD into infoprovider and make the link from infoobject AAAA? Thanks for any input.

    Hi,
    Write the Start routine to delete complete data packet whic won't have "Hey".
    DELETE SOURCE_PACKAGE WHERE TXTMD NP '"Hey'.
    If  you want load the data with blank for that InfoObejct if it won't contains "Hye".
    Write this code at TXTMD infoObejct level.
    if  SOURCE_PACKAGE-TXTMD NP 'Hey' .
          RESULT = ' '.
      elseif SOURCE_PACKAGE-TXTMD CP 'Hey' .
          RESULT = SOURCE_PACKAGE-TXTMD.
      endif.
    Note: In the above code I'm giving logic to do the same, but for code corrections please check with ABAPer.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Aug 12, 2009 10:48 AM

  • How to make iTunes detect the new location of music files?

    Hi everyone. I moved all of my music to a different location on my hard drive, and I changed the location in iTunes preferences, but it doesn't seem to detect this, so my library is empty now. I saved an itl, xml, and temp file as well, but I don't know what to do from here.
    I also tried dragging the new music folder onto the "Library" entry in iTunes, and this added everything, but I no longer have my ratings, playlists or anything like that.
    Is there some other way to have iTunes detect the new location? And can I get back my ratings and playlists?
    Thanks.

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • Can any body tell me how to make changes in the print layout of Fb03.

    hi,
    Can any body tell me how to make changes in the print layout of Fb03.
    I want to add comapny address on the layout.
    Regards
    Mave

    If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
    If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
    Good luck,
    Bhanu

  • How to make password for the printer to prevent coping paper from other s

     i have ( hp officejet pro 8600) how can i prevent others from making copies of paper  . when i am outside . i mean how can i lock the printer itself

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • How to make and Burn the project to DVD

    Would you pleased advice me how to make and burn the Project to a DVD as I'm new user for the Adobe Premier Pro.
    Tks & B/regards,
    Handjojo

    As said before you need Adobe ENCORE to make dvd menu and burn to dvd.
    But first you need to download and install Adobe ENCORE.
    Follow the instrtuctions in the link below how do downlaod and install.
    Encore CS6 not installed with Creative Cloud
    Then go over to Adobe TV.
    How to make a DVD.
    AdobeTV Learn Encore CS4 
    Learn Encore CS5 | Adobe TV 
    Using Premiere Pro CC & Encore CS6 for Bluray, DVD, and Interactive Video for iPad,ATV, and Mobile HD | DAVTechTable | Adobe TV 

Maybe you are looking for

  • PL/SQL Web Service problem in Oracle10g

    Hi everybody I try to publish PL/SQL Web Service using JDeveloper 9.0.4.0 and Oracle10g. But when I deploy the Web Service using 'http-web-site', error messages are: oracle.oc4j.admin.internal.DeployerException: Unknown site: http-web-site Active sit

  • Xsan + Logic Pro

    Does Xsan work with Logic? I know that Xsan doesn't allow applications to write directly to block level storage, and before expensive purchase is made, I'd like to find that out. Thanks iLan

  • Streaming mac content to ipad

    Hi I've spent time searching for a simple solution but so far all I have found is apple tv. I was hoping to avoid shelling out another £100. I want to stream content from my mac o my iPad 2 while in my house over my home wifi network. I'd also like t

  • Hard drive icon appears as folder icon in dock

    When I drag the hard drive icon for any of my hard drives (Mac Pro) to the dock, a folder icon rather than hard drive icon appears in the dock. It functions properly, accessing the full drive, but is harder to distinguish from the other folders in th

  • How to add a pagitems to a group

    mygroup := Application.ActiveDocumnet.Groups,Add(), then I can not find any method can add in InDesign CS4 Group object? Anybody show me a hint , please; Thanks