[Solved] How to recover the package list from another installation?

Hello,
I supposed gparted could make a fine result by moving the partition, but it didn't.
I was doing that on an USB installation, now fsck recover partially my partition, but mostly many files are gone. It seems that pacman databases are saved, then I would like to recover the list and try to reinstall all packages.
I can't enter by chroot on that partition, bash fails.
My attempt is to use pacman -r /mounted/partition packagelist, if I'll get the list, then it mostly possible to regain chroot access
EDIT
I got a flashback and I applied modifications in a temporary pacman.conf. In that configuration I modified the paths to all file used by pacman to reflect the other installation.
Finally I could get the list, but I didn't go for an update, because the installation was too old. I'm doing a fresh install with the recovered package list.
Last edited by TheSaint (2013-08-02 09:39:59)

I'm entirely agreed with you.
Some time I fail to remember such things. I don't regret much the loss, it was just a support installation for emergency cases. Home is safe in another partition
However it is a good exercise to rescue the package list.

Similar Messages

How to recover the autocomplete data from a Time Machine backup?

How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!

I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover?

How to recover the deleted reports from crystal reports XIR2

Hi,
There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
thanks in advance
Regards,
Krishna

Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
Answer for this question is...
Yes, it is possible if you have backup of your CMS and FRS.
Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
Copy the backed up file store to a Temp directory.
Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

How to recover the itunes music from other computer

i am using windows 7 64bit (computer B) with itunes. suddenly i lost the music from the itunes. i have another computer windows 7 32 bit (computer A) with itunes. how to recover the music from computer A to computer B
thanks
jimmy

Main thing is why would you be losing your music in iTunes. If it happened during an update and that's why you need to refer to the article to restore your old library.
However, if you want to move iTunes from old computer to new computer:
Refer to these articles:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751

HT4859 Last time I synced my IPad with my PC it migrated all my "Favorites" (about 100 folders) to the ICloud. I have searched and so far been unable to find out how to recover my "Favorites" list from the ICloud back to my PC. Any advice? Many thanks.

Hi, Last time I synced my IPad with my PC, it (unknown to me) migrated all my PC "Favorites" (about 100 folders) to the ICloud.
I have searched and so far been unable to find out how to recover my "Favorites" from the ICloud back to my PC. Any advice would
be appreciated. Thank you.

What did you do to get them synced to the Cloud. Would that procedure help me get my favorites synced to my iPad2?

How to import the Issues list from an Excel File in Project Server 2013

Hi,
I'm using Project Server 2013.
A Project Manager has been playing with the Issues List, deleting some fields, creating new columns and modifying some columns name. The result of this is that I'm getting this error everytime the task
Reporting (Project Sync) is executed:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='4feafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='5deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='69eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='75eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='81eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='8deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='5beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='67eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='73eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='7feafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='8beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='97eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='98eafda7-f147-e411-940d-005056957f05' JobUID='9e937da7-f147-e411-940e-005056957f0d' ComputerName='b579360a-53ab-4fe0-bf9b-c62f5e8d3529'
GroupType='ReportingWSSSync' MessageType='WSSSyncMessageEx' MessageId='1' Stage='' CorrelationUID='0945bd9c-0d6a-a0f1-47b0-68cdfcfbff9a'. For more details, check the ULS logs on machine
b579360a-53ab-4fe0-bf9b-c62f5e8d3529 for entries with JobUID
9e937da7-f147-e411-940e-005056957f0d
What I'm trying to do is to create a new Project from the scratch, update the Issues List, not deleting or modifying columns, just creating new columns in order to match the names he (the Project Manager) put in his Issues List, then Export the list to Excel,
and then create a datasheet view matching the Exported list, but here I don't know how to import the list (copy / paste or whatsoever it can be done...)
Do you know how to do it, or do you know another/any method to solve this problem?
Thank you in advance,
José Espases

Hi José,
2 considerations:
The first one is that (as you experienced) one should not delete or rename any of the predefined columns in the risk/issue list. What you did is the right way, meaning keeping the native column as is and creating new ones based on the business needs. Finally
you just need to create view with the appropriate fields.
Then for importing risks from an Excel list, I can't test it right now, but you should have a datagrid view (MS Access type) allowing you pasting data from Excel.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to recover the original OS from my laptop

Hi My Laptop model no is m6-n015dx and the serial no is [edited Serial Number by Moderator].
Right now i am in India. I was trying to install W7 in my machine and in that process i lost my original OS (W8.1).
i hope i might have deleted it from the Harddisk.
would you help me to recover the original OS.

Hi
Yes you have more than likely over written the recovery partition for your machine , If you contact HP in your local Region and request the recovery media from HP ( Charge will be aplicable ) for your machine and you will be able to re-install the software from the afore mentioned disks .
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

[SOLVED] How to set the packager name for an AUR package?

Hi,
I'm maintaining an AUR package (fspcc), but I don't know how to set the name of the "packager" for that package.
E.g. when you request info about some package
$ pacman -Qi somepkg
there is a line
Packager: Unknown Packager
that specifies the packager.
How do I set this "Packager" info so that any user installing my package will see what I want?
Last edited by lisztinf (2014-04-13 13:39:43)

Thanks for the answer.
I guess that when I run
$ makepkg
in my local build directory, then "mkpkg" will build a package with the "Packager" info set accordingly to my local makepkg.conf.
However, I would like another user - with his own makepkg.conf - to see what I want when installing the package. How can I achieve this?
If I install an official package - say pacman itself - through ABS, I see the "Packager" field properly set for that official package. But certainly this info doesn't come from my local makepkg.conf. I would like the same behaviour for my package. Is it possible?

How to recover the security copy from iCloud

When I set up my new iPhone I couldn't do it with my set up kept on iCloud because the version of IOS was different, so I started like new one and then I update the version of IOS. Now I don't know how to recover my security copy on iCloud. Could you please help me?

Go to Settings>General>Reset, tap Erase All Content and Settings, go back through the setup screens on the phone and when given the option, choose Restore from iCloud Backup.

How to execute the package generated from Warehousebuilder ??

Hi,
I am very new to OWB, i have created the mapping and i want to write a oracle job to run the mapping, Can i explicitly execute the Package generated by passing the parameters required,
I have actually created like following,
DECLARE
p_status VARCHAR2 (200);
p_deptno NUMBER;
p_max_no_of_errors VARCHAR2 (200);
p_commit_frequency VARCHAR2 (200);
p_operating_mode VARCHAR2 (200);
p_bulk_size VARCHAR2 (200);
p_audit_level VARCHAR2 (200);
p_purge_group VARCHAR2 (200);
BEGIN
p_deptno := 10;
p_max_no_of_errors := NULL;
p_commit_frequency := NULL;
p_operating_mode := NULL;
p_bulk_size := NULL;
p_audit_level := NULL;
p_purge_group := NULL;
map_filter_parameter.main (p_status => p_status,
p_deptno => p_deptno,
p_max_no_of_errors => p_max_no_of_errors,
p_commit_frequency => p_commit_frequency,
p_operating_mode => p_operating_mode,
p_bulk_size => p_bulk_size,
p_audit_level => p_audit_level,
p_purge_group => p_purge_group
DBMS_OUTPUT.put_line ('P_STATUS = ' || p_status);
END;
I am actually following error,
Line: ----
Connecting to the database bl.
ORA-20013: The workspace has not been set. Please call wb_workspace_management.set_workspace procedure to set workspace first.
ORA-06512: at "OWBSYS.WB_WORKSPACE_MANAGEMENT", line 1356
ORA-06512: at "OWBSYS.WB_WORKSPACE_MANAGEMENT", line 1387
ORA-06512: at "OWBSYS.WB_RTI_UTIL", line 102
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1020
ORA-06512: at "BL.MAP_FILTER_PARAMETER", line 2798
ORA-06512: at line 19
Process exited.
Disconnecting from the database bl.
I am not able to connect OWBSYS to see whats going on with OWBSYS.WB_WORKSPACE_MANAGEMENT as well.
Please suggest
Regards,
Ashoka BL

Hi Nawneet,
I tried like the following and getting the results,I searched in the forum to do this,
DECLARE
p_status VARCHAR2 (200);
p_deptno NUMBER;
p_max_no_of_errors VARCHAR2 (200);
p_commit_frequency VARCHAR2 (200);
p_operating_mode VARCHAR2 (200);
p_bulk_size VARCHAR2 (200);
p_audit_level VARCHAR2 (200);
p_purge_group VARCHAR2 (200);
BEGIN
p_deptno := 20;
p_max_no_of_errors := NULL;
p_commit_frequency := NULL;
p_operating_mode := NULL;
p_bulk_size := NULL;
p_audit_level := NULL;
p_purge_group := NULL;
owbsys.wb_workspace_management.set_workspace('ASHOK_WORKSPACE','ASHOK_BL');
map_filter_parameter.main (p_status => p_status,
p_deptno => p_deptno,
p_max_no_of_errors => p_max_no_of_errors,
p_commit_frequency => p_commit_frequency,
p_operating_mode => p_operating_mode,
p_bulk_size => p_bulk_size,
p_audit_level => p_audit_level,
p_purge_group => p_purge_group
DBMS_OUTPUT.put_line ('P_STATUS = ' || p_status);
END;
Do you please let me know what are these,
'PLSQLMAP','CUSTOMER_MAP' == WorkSpace_Name and User_Name ??
Regards,
Ashoka BL
Edited by: user7348859 on May 26, 2009 5:07 AM

How to recover the AP 350 from an interruption firmware?

Is there any procedure to recover the AP 350 firmware? My AP 350 just keep loading after a firmware upgrading through Web bowser. The boot process like
Inflating "EnterpriseAP Sys 11.07"...
2515380 bytes OK
Loaded driver for device "fec0", ifIndex=1.
Loaded driver for device "awc0", ifIndex=2.
Configured device "fec0" as IP address "172.31.31.177", network mask 0xffffff00.
Attaching network interface lo0... done.
Configured device "lo0" as IP address "127.0.0.1", network mask 0x00000000.
00:00:01 (Warning): Updating selected system firmware
00:00:06 (Info): Successfully updated system firmware
00:00:06 (FATAL): Installation Keys Restored! Rebooting System
*** Restarting System in 5 seconds...
Getting configuration parameters via DHCP over device "fec0"...
Warm reset.

I had a similar issue after upgrading. I can't remember if it was a 350 or a 1200, but it was VxWorks code. It seemed to be an issue with DHCP and some additional options defined in the DHCP scope. I unplugged the unit from the network, rebooted and used a console cable to set the IP manually and it worked fine. Cisco will be releasing IOS for the 350 in October, a big improvement for the 350.

How to run the java program from another directory?

Hi
Assumption:
data.java is in a package suncertify.db and place in a directory c:/code/suncertify/db/ directory
data.class file: is in c:/code/suncertify/db/ directory
current directory: c:/
How can execute the data.class directly in c:/ directory without changing directory to c:/code/ ?
Thanks in advance,
Adrian

Yes. You can use the -classpath and -sourcepath options to specify where to look for source files, and the -d option to specify where to generate the class files. Look up the usage of those options in the javac documentation:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/javac.html

How to summon the Dock correctly from another display

Whenever I try to summon the Dock from another display it won't switch displays. It's stuck, I do several passes with the cursor trying to call it but sometimes it works, sometimes it doesn't. I leave the cursor moving it on the border of the screen and even click it nothing.
I noticed that if I click a window on the screen where I want to summon it to, it speeds the process, but it won't always work.
Since I've been running Mavericks since it was in beta, I figured there was something wrong with some file so I did a clean install from the official Mac App Store copy and didn't do a Time Machine restore. Still nothing.
It's the Dock supposed to behave this way? It's this delay normal or is Mavericks still not finished? I don't have AppleCare support anymore so I can't call and rant/ask4assistance on the phone.
Help.

Hi Ingo,
check the existing process types. You can see their coding by copying the class name from the process chain maintenance --> Settings --> Maintain Process types.
Cheers
SAP NetWeaver BI Organisation

How to recover the deleted contacts from address book on mac book and iphone. Please!

i accidentally deleted all the contacts from my address book while my phone was still connected to my mac book.i dont have icloud or any other back ups. there are only few contacts left. i also restored my iphone by accitentally.
does anyone know if i can get them back by any chance? Please! Thnx!!!!!

If you deleted them and you don't have them backed up. You lost them, you can get them back by entering them again.

How to access the component id from another mxml?

I tried to set the data to a DataGrid in another mxml, but the complier said there's a problem, like this:
the components/FileDataGrid.mxml:
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
     xmlns:s="library://ns.adobe.com/flex/spark"
     xmlns:mx="library://ns.adobe.com/flex/mx" >
    <mx:DataGrid x="150" y="50" id="dgFile">       <mx:columns>
         <mx:DataGridColumn headerText="COL"/>
       </mx:columns>
    </mx:DataGrid>
</s:Group>
the main mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
          xmlns:s="library://ns.adobe.com/flex/spark"
          xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
          xmlns:custom="components.*" layout="absolute">
     <fx:Declarations>
          
     </fx:Declarations>
     <fx:Script>
          <![CDATA[
               private function loadDG():void
                    var arrFile:Array= new Array("abc","123");
                    dgFile.dataProvider = arrFile;
                    trace( "The data has successfully loaded" );
          ]]>
     </fx:Script>
     <s:Button x="300" y="50" label="Load" click="loadDG()" />
     <custom:FileDataGrid/>
</mx:Application>
The compiling error is :
Multiple markers at this line:
-1120: Access of undefined property dgFile.
-arrFile
Anybody can tell me, how to achieve it?
Thanks a lot!

Hi, You cant access it like this. To access, first give some id to the custom component you have added.
i.e
<custom:FileDataGrid id="custFDG"/>
Then you can acces it from script,
custFDG.dgFile.dataProvider = arrFile;
Hope this shud work fine.
Thanks.
Abhinav

[Solved] How to recover the package list from another installation?

Similar Messages

Maybe you are looking for