[SOLVED] httrack - Can't get its GUI webhttrack to work

I installed httrack v.3.41.3-1 from extra but can't get webhttrack, the GUI frontend, to work. Running webhttrack as root gives me the following error message: "/usr/bin/webhttrack(17566): could not find httrack directory". There seem to be a whole lot of files missing in the httrack package in extra that are present in the original source package httrack-3.41-3.tar.gz from http://www.httrack.com.
How can I get httrack to run in its GUI?
Last edited by RobF (2007-07-21 01:07:40)

Remove the 'rm -r $startdir/pkg/usr/share' line from it's PKGBUILD, build it, and it should work fine then.
cheers,

Similar Messages

[SOLVED] I can't get my second monitor to work. :'(

whatever i try it doesent work, my xorg.conf is configured for it, but it wont start. the graphics carg is a nvidia 8800 GTS
any ideas?
-xhhux
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Wed Oct 1 15:13:37 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "freetype"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG L246WP"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Apple CinemaDisplay"
HorizSync 30.0 - 75.0
VertRefresh 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS 512"
BusID "PCI:3:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS 512"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "SLI" "Auto"
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "SLI" "Auto"
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by xhhux (2008-11-07 07:06:47)

Ruckus wrote:
What is the error your getting?
cat /var/log/Xorg.0.log
Also, have you tried the Nvidia X Server settings program to generate your Xorg.conf?
it just wont sart at all. and yes i have tried nvidia's x server settings.
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH x86_64
Current Operating System: Linux shit 2.6.27-ARCH #1 SMP PREEMPT Sun Oct 26 10:08:01 UTC 2008 x86_64
Build Date: 17 August 2008 10:36:51PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 7 10:11:31 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7c06c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,03a1 card 10de,c55e rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,03ac card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,03aa card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,03a9 card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:00:4: chip 10de,03ab card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:00:5: chip 10de,03a8 card 10de,c55e rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:6: chip 10de,03b5 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:00:7: chip 10de,03b4 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,03ad card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:1: chip 10de,03ae card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:2: chip 10de,03af card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:3: chip 10de,03b0 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:4: chip 10de,03b1 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:5: chip 10de,03b2 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:01:6: chip 10de,03b3 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:02:0: chip 10de,03b6 card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:02:1: chip 10de,03bc card 10de,c55e rev a1 class 05,00,00 hdr 00
(II) PCI: 00:02:2: chip 10de,03ba card 10de,c55e rev a1 class 05,00,00 hdr 80
(II) PCI: 00:03:0: chip 10de,03b7 card 0000,0000 rev a1 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0369 card 10de,c55e rev a2 class 05,00,00 hdr 00
(II) PCI: 00:0a:0: chip 10de,0360 card 10de,c55e rev a3 class 06,01,00 hdr 80
(II) PCI: 00:0a:1: chip 10de,0368 card 10de,c55e rev a3 class 0c,05,00 hdr 80
(II) PCI: 00:0b:0: chip 10de,036c card 10de,c55e rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:0b:1: chip 10de,036d card 10de,c55e rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:0d:0: chip 10de,036e card f0de,c55e rev a1 class 01,01,8a hdr 00
(II) PCI: 00:0e:0: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0e:1: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0e:2: chip 10de,037f card 10de,c55e rev a3 class 01,01,85 hdr 80
(II) PCI: 00:0f:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,01 hdr 81
(II) PCI: 00:0f:1: chip 10de,0371 card 0175,10de rev a2 class 04,03,00 hdr 80
(II) PCI: 00:11:0: chip 10de,0373 card 10de,c55e rev a3 class 06,80,00 hdr 00
(II) PCI: 00:12:0: chip 10de,0373 card 10de,c55e rev a3 class 06,80,00 hdr 00
(II) PCI: 00:13:0: chip 10de,0376 card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 02:00:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 02:02:0: chip 10de,05b1 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 03:00:0: chip 10de,0600 card 1682,2332 rev a2 class 03,00,00 hdr 00
(II) PCI: 04:00:0: chip 10de,0600 card 1682,2332 rev a2 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 10de,c55e rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:3:0), (0,1,4), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
[4] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[5] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[6] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[7] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xcdffffff (0x8000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xbfffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:10:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:15:0), (0,5,5), BCTRL: 0x0a04 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xcfe00000 - 0xcfefffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:19:0), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (1:0:0), (1,2,4), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
[4] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[5] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[6] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[7] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xcdffffff (0x8000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xbfffffff (0x20000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (2:0:0), (2,3,3), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 3 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xca000000 - 0xcdffffff (0x4000000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (2:2:0), (2,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xc6000000 - 0xc9ffffff (0x4000000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b]
(--) PCI:*(3:0:0) nVidia Corporation unknown chipset (0x0600) rev 162, Mem @ 0xcc000000/24, 0xb0000000/28, 0xca000000/25, I/O @ 0x9c00/7
(--) PCI: (4:0:0) nVidia Corporation unknown chipset (0x0600) rev 162, Mem @ 0xc8000000/24, 0xa0000000/28, 0xc6000000/25, I/O @ 0x8c00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[1] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[2] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[3] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[4] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[5] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[6] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[7] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[8] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[9] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[10] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[11] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[12] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[13] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[14] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[15] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[16] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[17] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[19] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[22] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[26] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[27] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[28] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[29] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[30] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[31] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[32] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[33] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[34] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[35] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[36] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[37] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[38] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[39] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[40] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[41] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[42] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[43] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[1] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[2] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[3] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[4] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[5] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[6] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[7] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[8] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[9] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[10] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[11] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[12] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[13] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[14] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[15] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[16] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[17] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[19] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[22] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[26] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[27] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[28] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[29] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[30] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[31] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[32] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[33] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[34] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[35] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[36] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[37] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[38] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[39] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[40] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[41] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[42] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[43] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.80 Wed Oct 1 15:09:29 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 177.80 Wed Oct 1 14:50:00 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03:00:0
(WW) NVIDIA: No matching Device section for instance (BusID PCI:4:0:0) found
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[29] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[30] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[31] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[32] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[33] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[34] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[35] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[36] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[37] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[38] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[39] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[40] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[41] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[42] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[43] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[44] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[45] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[46] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[47] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[48] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[49] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[50] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[51] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[52] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
[53] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[54] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "SLI" "Auto"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA SLI enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS 512 (G92) at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.16.00.39
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS 512 at
(--) NVIDIA(0): PCI:3:0:0:
(--) NVIDIA(0): LG L246WP (DFP-0)
(--) NVIDIA(0): LG L246WP (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L246WP (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS 512 (G92) at PCI:4:0:0 (GPU-1)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.16.00.39
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS 512 at
(--) NVIDIA(0): PCI:3:0:0:
(--) NVIDIA(0): LG L246WP (DFP-0)
(--) NVIDIA(0): LG L246WP (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L246WP (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "720x576".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1280x720" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1280x720".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "720x576".
(WW) NVIDIA(0): The EDID for LG L246WP (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "1280x720" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid VertRefresh range (56.000-75.000 Hz) would exclude
(WW) NVIDIA(0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0): check for mode "1280x720".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xcfef8000 - 0xcfefbfff (0x4000) MX[b]
[5] -1 0 0xcfeff000 - 0xcfeff7ff (0x800) MX[b]
[6] -1 0 0xcfff5000 - 0xcfff500f (0x10) MX[b]
[7] -1 0 0xcfff6000 - 0xcfff60ff (0x100) MX[b]
[8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[b]
[9] -1 0 0xcfff8000 - 0xcfff800f (0x10) MX[b]
[10] -1 0 0xcfff9000 - 0xcfff90ff (0x100) MX[b]
[11] -1 0 0xcfffa000 - 0xcfffafff (0x1000) MX[b]
[12] -1 0 0xcfff0000 - 0xcfff3fff (0x4000) MX[b]
[13] -1 0 0xcfffb000 - 0xcfffbfff (0x1000) MX[b]
[14] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[b]
[15] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[b]
[16] -1 0 0xcfffe000 - 0xcfffe0ff (0x100) MX[b]
[17] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[b]
[18] -1 0 0xc6000000 - 0xc7ffffff (0x2000000) MX[b](B)
[19] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[b](B)
[20] -1 0 0xc8000000 - 0xc8ffffff (0x1000000) MX[b](B)
[21] -1 0 0xca000000 - 0xcbffffff (0x2000000) MX[b](B)
[22] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[23] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[b]
[27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[b]
[29] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[33] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[35] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[38] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[40] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[43] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[b]
[44] -1 0 0x0000f000 - 0x0000f03f (0x40) IX[b]
[45] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[b]
[46] -1 0 0x0000f800 - 0x0000f83f (0x40) IX[b]
[47] -1 0 0x0000fc00 - 0x0000fc7f (0x80) IX[b]
[48] -1 0 0x00008c00 - 0x00008c7f (0x80) IX[b](B)
[49] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[b](B)
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded

[SOLVED] Help, can't get my X-Fi to work :(

Hi all. I recently decided to try out Arch. I'm currently running Gentoo on my boxes, but I set up arch on a new drive and I'm giving it a go. However, the time I have saved by not having to compile anything or troubleshoot emerge issues has now been completely taken up by trying to get my sound working. Works fine in Gentoo, so I have made sure to compare kernel configurations and they both seem the same in relevant areas. ALSA is enabled, and OSS is disabled The XFI driver is built-in, and no other drivers are enabled:
[root@server2k linux]# grep -i snd .config
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
[root@server2k linux]#
I've been all over the net and I have seen people mention similar problems with the ctxfi driver. But no solutions that have worked for me. The physical card is seen:
[root@server2k linux]# lspci | grep -i creative
00:0e.0 Multimedia audio controller: Creative Labs SB X-Fi
however alsa doesn't see it:
[root@server2k linux]# cat /proc/asound/cards
--- no soundcards ---
I tend to not use modules for stuff I know I need (e.g. sound card drivers...) , but the module is there..in the kernel. I was trying with a separate module before, and I made that lsmod told me it was loaded. However nothing seems to make a difference. I'm pretty sure alsa is configured correctly because I was seeing my onboard sound before I disabled it. I also took out all of the alsa-related stuff I had put in rc.conf and modules.conf because nothing seemed to make a difference. it was all related to getting the ctxfi crd to show up as card0 to override the onboard, but since it's not even being detected that seems sort of pointless right now.
If anyone has any ideas of what to try next I would really appreciate it. These are the versions I am running:
kernel 2.6.34.1
alsa-lib-1.0.23-1
alsa-utils-1.0.23-2
Oh, the otehr weird part is if I look in the dmesg output, the driver claims that "Something's wrong!!!" Yeah...really useful. In the source for the driver there are like 16 places where that error message is printed, and I'm not about to go hacking some module code. I did put some print statements in there to see where it was failing, and it looks like it's failing at this call:
err = atc_create_hw_devs(atc);
Don't know if that helps, is anyone familiar with the actual driver?
Last edited by Fox2k (2010-07-11 23:58:57)

Thanks, all. No luck, I ended up scouring the gentoo forums some more and found somebody who ran in to the exact same problem last year which I am having now. Here's the solution. It worked for me. Not ideal, but all else failed:
Today I tried again to get my soundcard working, this time with:
linux kernel 2.6.31 and the alsa ctxfi driver in it
linux kernel 2.6.31 and alsa-driver-9999 from portage
both led to the same results as before (see my postings above)
So I finally hacked the official creative xfi-driver to compile against 2.6.31. And now sound is working again for me...
If anyone else runs into the same trouble as I did, here are the changes i made:
Code:
$ diff XFiDrv_Linux_Public_US_1.00 XFiDrv_Linux_Public_US_1.00-new
diff XFiDrv_Linux_Public_US_1.00/ctatc.h XFiDrv_Linux_Public_US_1.00-new/ctatc.h
25d24
< #include <sound/driver.h>
diff XFiDrv_Linux_Public_US_1.00/cthw20k1.c XFiDrv_Linux_Public_US_1.00-new/cthw20k1.c
23a24
> #include <linux/delay.h>
diff XFiDrv_Linux_Public_US_1.00/cthw20k2.c XFiDrv_Linux_Public_US_1.00-new/cthw20k2.c
23a24
> #include <linux/delay.h>
diff XFiDrv_Linux_Public_US_1.00/xfi.c XFiDrv_Linux_Public_US_1.00-new/xfi.c
14d13
< #include <sound/driver.h>
55,59c54,57
< card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
< if (card == NULL) {
< return -ENOMEM;
< }
<
> err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
> if (err < 0)
> return err;
>
(reference: http://forums.gentoo.org/viewtopic-p-63 … l#6348361)
Last edited by Fox2k (2010-07-11 22:32:40)

TS1702 I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

Actually, wrong.
The tech support people can help with Playbook purchased apps. If you've called and they said they cannot, you were lied to.
Even in the link you posted, in #10, it states clearly "App Refund related matters are handled by BlackBerry Customer Care." That, my friend is accessed by the support number. Again, if you were told otherwise, you should inform them of such or ask for a manage/supervisor.
And, you don't have a "Partner ID" because you are not a "Partner". The section you're referring to applies to mobile providers, which are the Partners.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

Can't Get a GUI Running

Hey guys,
Alright, this is roughly what I have going on.
I have quite a few methods, mostly all of which have to do with reading input from an Xbox controller, writing information to a serial controller, reading information from the serial controller, etc, etc.
What I want is to display certain information in a simple-looking GUI. What I have right now is a load of System.out.println's which looks quite ugly.
(Think of the GUI as something simple that displays what buttons are pressed, etc...)
The thing is, I can't get the GUI to function in my program. I mean, I can get a simple GUI window open in a separate .java file, but when I try to take the code and put it into the .java file with the rest of my program, bad things happen. (It's a bit hard to explain, but because some of my methods have never-ending while loops (listening for controller input), the methods that open the GUI window and continually update the variables are never executed.)
I hope someone can just point me in the right direction or something.
Thanks.
Edited by: Ralph23 on Jun 6, 2009 8:29 PM
Edited by: Ralph23 on Jun 6, 2009 8:29 PM

Looks to me like this would be the right direction:
[Swing Concurrency Tutorial|http://java.sun.com/docs/books/tutorial/uiswing/concurrency/]

My IPad was stolen. Where can I get its serial number?

My IPad was stolen. Where can I get its serial number?

Pornwara wrote:
Where can I get its serial number?
See > http://support.apple.com/kb/ht1349
Pornwara wrote:
My IPad was stolen.
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668

There is an locked iphone,I can't get its info.Its serial number is 70******A4S.Can you tell me about info of this iphone, and if I want to unlock it,how I do.Thanks.

There is an locked iphone,I can't get its info.Its serial number is 70******A4S.Can you tell me about info of this iphone, and if I want to unlock it,how I do.Thanks.
<Edited by Host>

I don't know the meaning about the info of the picture above.Do you know what is the meaning? Thanks.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it.

How can I get the readability bookmarklet to work

Firefox 3.6.8 in Windows XP Home on a Toshiba netbook. How can I get the "readability" bookmarklet to work? It works just fine in Camino on an Apple mini desktop computer running OS X 10.4.11 (Tiger.) Readability uses javascript, which I do have turned on. The problem (of it not working) doesn't seem to have anything to do with the NoScript add-on either, as I tried allowing everything on the page and it still didn't work. Any ideas of what to try next?
''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746624 here]''

Hi there.
By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

HT1338 HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE 4

HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE4

Your bluetooth what...? Its impossible to give any help without knowing what sort of device you are trying to pair with the iPhone.
iOS supports the following bluetooth profiles - http://support.apple.com/kb/HT3647

Can I get a stepper motor to work useing an AO channel on a DAQ card?

Can I get a stepper motor to work useing an AO channel on a DAQ card? I know its a very low currentl coming out, but what Im going to be using the motor for is very weak. Has anyone tried this before? I certinaly dont want to spend 2,000+ on somthing that will be basicly moving a string on some pullys back and forth.
Thanks,
-Mark

Greetings, Mark
You can certainly use the A0 as a driving signal, but you need to amplify the current considerably to run a stepper motor. Additionally, most stepper motors require multiple phase driving signals to work properly. If I understand your application, I believe a stepper motor is a bit of overkill...you only want to use them when precise positioning and repeatability is an issue. You might look at some of the linear actuators available.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

I have tried to reindex my messages but I still can not get the search function to work in email

I have tried reindecing my messages by rebuilding the library but I still can't get my message function to work in mail. Any proposed solutions much appreciated.

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

[SOLVED] httrack - Can't get its GUI webhttrack to work

Similar Messages

Maybe you are looking for