[SOLVED] i915 kernel module depends on acpi

I have a couple old desktops circa 2005 with Pentium 4s that I've been using to drive monitors in an Xdmx setup. Anyway, I've been using the VESA driver, but I'd really like some hardware acceleration, so having the actual intel driver would be nice--that's where the problem arises.
i915 won't load because it depends on button (ACPI_BUTTON) and button fails to load with
No such device
From what I can tell, it's because my machine doesn't fully support ACPI. Is there any way around this?
I've googled and read countless pages, tried every order of every module I read about in mkinitcpio and the bootloader. acpi=force, i915, intel_agp etc. So I'm wondering if there's a version of i915 that doesn't depend on button or perhaps a way to fake it somehow.
Thanks!
Last edited by chapatt (2015-02-27 01:29:58)

Hmm, I just did an update and it looks like xorg-server-1.17.1-3 just broke everything. It seems to want to use the modesetting driver now that it's bundled with xorg-server. I downgraded back to 1.16.3-2 and I at least have VESA support back. It looks like the progression of X (ha) is deprecating my old hardware even further. The fact that it used to work makes me cling to some hope.

Similar Messages

[Solved]Virtualbox kernel module not loaded

I update my system today and when I try to run Virtualbox...
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.6.11-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
I already had this trouble before and this was the fix
# modprobe vboxdrv
But it doesn't work anymore
Any ideas?
Edit: This just get fixed by itself when restaring my PC. Sorry
Last edited by ilq (2013-02-13 02:32:43)

fsckd wrote:
rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
Amarildo, see the wiki.
Thanks, it really helped. It's solved.

[SOLVED] Loading Kernel Modules with Options

Hi,
I am trying to load the nf_conntrack_ftp kernel module on boot. I followed the Arch Wiki's article on kernel module loading [0] and created a file in /etc/modules-load.d/ called nf_conntrack_ftp.conf:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
This loads the nf_conntrack_ftp module on boot just fine; unfortunately the module uses the default FTP port (21) and I need it to run on a different port (6621). When I try to dynamically load nf_conntrack_ftp using modprobe nf_conntrack_ftp ports=6621 it loads just fine and according to systools has the port set correctly. However, if I try to set the port anywhere in /etc/modules-load.d/ I always get an error message during boot saying:
Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details.
Looking at the systemctl status message as recommended by the error message on boot doesn't yield anything useful:
systemctl status systemd-modules-load.service wrote:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Sun 2014-02-09 16:46:13 EST; 11min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 287 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 287 (code=exited, status=1/FAILURE)
Feb 09 16:46:13 babylon5 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Feb 09 16:46:13 babylon5 systemd[1]: Failed to start Load Kernel Modules.
Feb 09 16:46:13 babylon5 systemd[1]: Unit systemd-modules-load.service entered failed state.
I have tried to set the "ports=6621" module option in multiple ways ...
1. As part of the same nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:
# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
options nf_conntrack_ftp ports=6621
2. As a separate test.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
/etc/modules-load.d/test.conf wrote:options nf_conntrack_ftp ports=6621
3. I even tried just adding "ports=6621" to the end of the nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp ports=6621
None of these worked. The moment there is "options nf_conntrack_ftp ports=6621" in any file in /etc/modules-load.d/ I get the error message on boot and the kernel module won't get loaded.
What am I missing / doing wrong? Is it not possible to set kernel module parameters on boot? Does nf_conntrack_ftp need to be loaded by the initramfs, i.e. do I need to add the modconf hook to my /etc/mkinitcpio.conf?
Thanks,
Marek
[0] https://wiki.archlinux.org/index.php/Kernel_modules
Last edited by marco1475 (2014-02-09 22:54:26)

Raynman wrote:
marco1475 wrote:[0] https://wiki.archlinux.org/index.php/Kernel_modules
Read this again, specifically the section about setting options, paying close attention to directory names.
D'oh! Thanks for pointing that out, what a stupid oversight on my part:
The files that tell the system which kernel modules to load go into /etc/modules-load.d/.
The files that tell the system which parameters to pass to the kernel modules when loading them go into /etc/modprobe.d/.
Now that each file is where it belongs everything works.

[SOLVED] Loading kernel modules: 'Invalid module foramat'

Hi.
I installed latest driver for my VIA video card. The driver is for Ubuntu and SuSE, but I successfully installed it and the files are at place. I changed the driver in my xorg.conf file and it is working, but I am not able to load 'drm' 'via-chrome9'and 'via-agp' kernel modules. The output message says "Invalid module format". These modules are working on Ubuntu. Is there something I can do to make them work.
Regards.
Last edited by Gruntz (2008-05-02 09:41:07)

Gruntz wrote:These modules are working on Ubuntu.
You cannot use packages compiled for Ubuntu's kernel with Arch's kernel. You'd have to recompile it against our kernel

"Failed to load the NVIDIA kernel module" [SOLVED]

Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)

karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)."

Kernel doesn't log ACPI events: ACPI module or Bios corruptions

Well, this is very strange and i dunno where to look at to solve this:
My new NP530U3C (Samusung ultrabook)is running Arch and i'm currently using acpid to trigger the acpi events couse i have no DE (fluxbox).
I can't understand the way my kernel and acpid log the LID event:
Kernel.log
Oct 6 20:06:46 localhost kernel: [ 2.105259] ACPI: Lid Switch [LID0]
Oct 6 20:44:31 localhost kernel: [ 2.111136] ACPI: Lid Switch [LID0]
Oct 6 23:03:18 localhost kernel: [ 2.111244] ACPI: Lid Switch [LID0]
Oct 6 23:17:14 localhost kernel: [ 2.088524] ACPI: Lid Switch [LID0]
Messages.log
Oct 6 20:06:46 localhost kernel: [ 2.105259] ACPI: Lid Switch [LID0]
Oct 6 20:44:31 localhost kernel: [ 2.111136] ACPI: Lid Switch [LID0]
Oct 6 20:45:29 localhost logger: LID closed
Oct 6 20:45:48 localhost logger: LID opened
Oct 6 20:53:58 localhost logger: LID closed
Oct 6 20:54:07 localhost logger: LID opened
Oct 6 23:00:04 localhost logger: LID closed
Oct 6 23:00:16 localhost logger: LID opened
Oct 6 23:03:18 localhost kernel: [ 2.111244] ACPI: Lid Switch [LID0]
Oct 6 23:17:14 localhost kernel: [ 2.088524] ACPI: Lid Switch [LID0]
Oct 6 23:18:32 localhost logger: LID closed
Oct 6 23:18:40 localhost logger: LID opened
Oct 6 23:24:33 localhost logger: LID closed
Oct 6 23:24:40 localhost logger: LID opened
Oct 6 23:27:18 localhost logger: LID closed
Oct 6 23:27:28 localhost logger: LID opened
Oct 6 23:33:40 localhost logger: LID closed
Oct 6 23:33:48 localhost logger: LID opened
When i close the lid, i have to wait 10 sec approx to trigger the LID close event and start the suspend action!
on wakeup i don't know because my samsung can wakeup only with the power button (no lid in wakeup events).
So somebody can enlighten me?
*EDIT <-----
I can summarize it is a corruption of the Bios/ACPI module that affect this laptop after a certain suspentions circle (I mean not every first suspentions).
I would like to debug in a better way but i have no instruments to investigate:
If someone can point me to a way to debug this stuff like Bios corruptions and/or Kernel module failure...
Any advide is appreciated
Last edited by j0lly (2012-10-29 14:29:44)

well, is a samsung ultrabook! i'm doing some m ore tests and still 10 sec delayed!
a note:
when the kernel log the LID state i can suspend instantly after i really close the LID.
after a reboot, and halt/start thigs doesn't changes....
The kernel logger resume after some reboots or *resetting* (using a needle to click a button above the laptop close to the battery) the laptop <-- this method was whrote somewhere and i tried it, and solved sometinms the issue for 2/3 days.
is starnge because it appears without any regularity, but i'm not so pro and is difficult for me to figure out what can trigger the event!
EDIT
Oct 7 00:21:58 localhost kernel: [ 686.653890] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
Oct 7 00:21:59 localhost kernel: [ 686.668774] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
dunno if is important, but after a resume from suspend, i got this messege. i thought it was only after it (like a little error in the resume hooks) but no i'm noticing it in the messages.log every how
Last edited by j0lly (2012-10-06 22:24:03)

[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.

fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)

Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55)

VFAT kernel module won't load [SOLVED]

I'm running kernel version 3.7.5 and after the update that got me to that version, it appears to have completely borked VFAT and kernel modules in general. My system still runs fine, but the vfat module is missing and cannot be loaded with modprobe or insmod. Oddly, the kernel object exists in /usr/lib/modules, yet my system seems to be ignoring it. Upon further investigation, it appears that it is impossible to load or remove ANY modules using modprobe or insmod. I recently did a reinstall of Arch, following exactly the steps in the Beginner's Guide, if that makes any difference.
Help? Please? I need the vfat module loaded before I can compile a custom kernel (my next big project)
Last edited by ParanoidAndroid (2013-02-01 00:50:27)

yup, that worked *facepalm* marking as solved.

[SOLVED] pacman -Syu on 10/17/2012, systemd can't load kernel modules

Ok, I did a [pacman -Syu] on my laptop, and everything went well. So I decided to upgrade my PC as well, did a reboot and then couldn't ssh into it.
Had to access the machine, and found
# systemctl --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
[email protected] loaded failed failed dhcpcd on eth0
httpd.service loaded failed failed Apache Web Server
systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
3 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
so it failed to load kernel modules...
# systemctl status systemd-modules-load.service
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Wed, 17 Oct 2012 18:27:11 -0400; 45min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 102 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-modules-load.service
Oct 17 18:27:11 MyHost systemd[1]: Failed to start Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
... then I checked network devices
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# ip addr show dev eth0
Device "eth0" does not exist.
... then the modules; and I saw that none appeared for the Ethernet...
# lspci -v | grep Ethernet -A8
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fc00 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
... whereas they did for other devices
# lspci -v | grep Kernel
Kernel driver in use: ohci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: sata_nv
Kernel driver in use: sata_nv
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: nouveau
I'm guessing it's probably something with the new image after the pgrade, but I don't know which module to load nor do I
understand why systemd isn't loading the modules when it was working stable enough to act as a headless server before. However, I've only been a week or so with systemd and might have overlooked something in the configs. Any help or insight would be greatly appreciated. Please. I'm desperate.
Last edited by confusion-is-my-sedative (2012-10-26 21:30:01)

Yep, I got that far, and tried the same advice from a different user with a 'tee' command which did the same thing, but unfortunately the forcedeth module can't be loaded because its in a different directory than the 'uname -r' specification allows modprobe to search for. I posted my attempts here: https://bbs.archlinux.org/viewtopic.php?pid=1181940

[SOLVED] nVidia 87.76 Drivers installer fails to build kernel module

Hey,
I have a nVidia GeForce2 Integrated graphics card on my Asus A7N266 motherboard. According to the nVidia site, http://www.nvidia.com/object/IO_32667.html, the most recent driver that supports this is the 96.xx series. Yet as shown here, http://www.nvnews.net/vbulletin/showthread.php?t=87332, many people have found that the 96.xx series drivers cause graphical corruption when using a GeForce2 IGP.
Before coming to Arch, I had used Xubuntu 7.04 and managed to compile the last known working drivers, version 87.76, following the instructions here: http://kmandla.wordpress.com/2007/03/25 … 20-12-386/
That all went well but now I'm using Arch. I tried using the nvidia-96.xx driver in the repos just for testing sake but I still got the same graphical corruption.
Thus I have been trying to install the 87.76 drivers on Arch, but it always fails at the kernel module building stage. I had first applied this patch here, http://www.nvnews.net/vbulletin/showthr … ost1086669, before compling as the plain driver wont compile against recent kernels.
Here is the output from the installer:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Aug 5 11:57:53 2007
option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
precompiled interfaces : true
no ncurses color : false
query latest version : false
OpenGL header files : true
no questions : false
silent : false
no recursion : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
no kernel module : false
force SELinux : default
force tls : (not specified)
X install prefix : (not specified)
X library install path : (not specified)
X module install path : (not specified)
OpenGL install prefix : (not specified)
OpenGL install libdir : (not specified)
utility install prefix : (not specified)
utility install libdir : (not specified)
doc install prefix : (not specified)
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)
Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> Kernel source path: '/lib/modules/2.6.22-ARCH/build'
-> Kernel output path: '/lib/modules/2.6.22-ARCH/build'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Cleaning kernel module build directory.
executing: 'cd ./usr/src/nv; make clean'...
rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nv.o nv
-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nvidia.mod.o
rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
rm -f -f stprof stprof.o symtab.h
rm -f -rf .tmp_versions
-> Building kernel module:
executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.22-ARCH/bui
ld SYSOUT=/lib/modules/2.6.22-ARCH/build'...
NVIDIA: calling KBUILD...
make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/build SUBDIRS=/home
/kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
nv modules
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it
echo; \
/bin/false)
make[2]: *** No rule to make target `GLX'. Stop.
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [mdl] Error 1
make: *** [module] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Any ideas as to how I can get the kernel module to build?
I am using 'kernel26 2.6.22.1-4' with the 'kernel-headers 2.6.22.1-1' from the testing repo.
Last edited by Nameless One (2007-08-10 07:08:38)

make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/buildSUBDIRS=/home/kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
The name of the directory you placed the driver in contains spaces. That is why you get the no rule to make target GLX error.
It would be better not to circumvent pacman. I am using the following PKGBUILDs for the 8776 driver:
nvidia-8776:
pkgname=nvidia-8776
pkgver=1.0.8776
_nver=1.0-8776
_kernver='2.6.22-ARCH'
pkgrel=1
pkgdesc="NVIDIA drivers for Arch kernel."
arch=(i686 x86_64)
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=(kernel26 nvidia-8776-utils)
conflicts=('nvidia' 'nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
install=nvidia.install
source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run NVIDIA_kernel-1.0-8776-20061203.diff.txt)
md5sums=('93ad45fe7b974a5a80348e1890f9b7c9' '70e669f06ee4881c2583261672de292a')
[ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b' '70e669f06ee4881c2583261672de292a')
build()
# Extract
cd $startdir/src/
sh NVIDIA-Linux-$ARCH-${_nver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${_nver}-pkg0
# Any extra patches are applied in here...
patch -p0 < $startdir/NVIDIA_kernel-1.0-8776-20061203.diff.txt ||return 1
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/$_kernver/build module || return 1
# install kernel module
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
Place the patch (NVIDIA_kernel-1.0-8776-20061203.diff.txt) and nvidia.install in the same directory as the PKGBUILD.
nvidia-utils:
pkgname=nvidia-8776-utils
pkgver=1.0.8776
_nver=1.0-8776
pkgrel=1
pkgdesc="NVIDIA drivers utilities and libraries."
arch=(i686 x86_64)
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=(xorg-server)
conflicts=('libgl' 'libgl-dri' 'ati-fglrx-utils' 'nvidia-legacy-utils' 'nvidia-71xx-utils' 'nvidia-96xx-utils')
provides=('libgl' )
#install=nvidia.install
source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run)
md5sums=('93ad45fe7b974a5a80348e1890f9b7c9')
[ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b')
build()
# override nvida install routine and do it the long way.
cd $startdir/src/
sh NVIDIA-Linux-${ARCH}-${_nver}-pkg0.run --extract-only
cd NVIDIA-Linux-${ARCH}-${_nver}-pkg0/usr/
mkdir -p $startdir/pkg/usr/{lib,bin,share/applications,share/pixmaps,man/man1}
mkdir -p $startdir/pkg/usr/lib/xorg/modules/{extensions,drivers}
mkdir -p $startdir/pkg/usr/share/licenses/nvidia/
install `find lib/ -iname \*.so\*` $startdir/pkg/usr/lib/
install lib/tls/* $startdir/pkg/usr/lib
install share/man/man1/* $startdir/pkg/usr/man/man1/
rm $startdir/pkg/usr/man/man1/nvidia-installer.1.gz
install X11R6/lib/libXv* $startdir/pkg/usr/lib/
install share/applications/nvidia-settings.desktop $startdir/pkg/usr/share/applications/
# fix nvidia .desktop file
sed -e 's:__UTILS_PATH__:/usr/bin:' -e 's:__PIXMAP_PATH__:/usr/share/pixmaps:' -i $startdir/pkg/usr/share/applications/nvidia-settings.desktop
install share/pixmaps/nvidia-settings.png $startdir/pkg/usr/share/pixmaps/
install X11R6/lib/modules/drivers/nvidia_drv.so $startdir/pkg/usr/lib/xorg/modules/drivers
install X11R6/lib/modules/extensions/libglx.so.$pkgver $startdir/pkg/usr/lib/xorg/modules/extensions
install -m755 bin/nvidia-{settings,xconfig,bug-report.sh} $startdir/pkg/usr/bin/
cd $startdir/pkg/usr/lib/;
ln -s /usr/lib/libGL.so.$pkgver libGL.so
ln -s /usr/lib/libGL.so.$pkgver libGL.so.1
ln -s /usr/lib/libGLcore.so.$pkgver libGLcore.so.1
ln -s /usr/lib/libnvidia-cfg.so.$pkgver libnvidia-cfg.so.1
ln -s /usr/lib/libnvidia-tls.so.$pkgver libnvidia-tls.so.1
cd $startdir/pkg/usr/lib/xorg/modules/extensions;
ln -s /usr/lib/xorg/modules/extensions/libglx.so.$pkgver libglx.so
install $startdir/src/NVIDIA-Linux-${ARCH}-${_nver}-pkg0/LICENSE $startdir/pkg/usr/share/licenses/nvidia/
find $startdir/pkg/usr -type d -exec chmod 755 {} \;
# phew :)
Last edited by kappa (2007-08-09 11:14:42)

[SOLVED] Catalyst-hook won't build kernel module

I HAVE SOLVED THE PROBLEM. I WAS MISSING /usr/lib/modules/extramodules-3.11-ARCH/version !
Hello, I got a problem with my Arch Linux install. Today I got a new kernel update (Linux-3.11.1-2-ARCH) and catalyst-hook attemptet to rebuild the fglrx kernel module, but failed.
This is my /var/log/catalyst-install.log:
2013-09-25 13:09:13
Building fglrx module for 3.11.1-2-ARCH kernel ...
OsVersion says: SMP=1
file /proc/kallsyms says: SMP=1
file /usr/lib/modules/3.11.1-2-ARCH/build/include/generated/autoconf.h says: SMP=1
file /usr/lib/modules/3.11.1-2-ARCH/build/include/generated/autoconf.h says: MODVERSIONS=1
file /usr/lib/modules/3.11.1-2-ARCH/build/arch/x86/include/asm/compat.h says: COMPAT_ALLOC_USER_SPACE=arch_compat_alloc_user_sp$
make: Entering directory `/usr/src/linux-3.11.1-2-ARCH'
CC [M] /tmp/catalyst.H8Xs1y/firegl_public.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_acpi.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_agp.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_debug.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_ioctl.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_io.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_pci.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_str.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_iommu.o
CC [M] /tmp/catalyst.H8Xs1y/kcl.o
CC [M] /tmp/catalyst.H8Xs1y/kcl_wait.o
LD [M] /tmp/catalyst.H8Xs1y/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/catalyst.H8Xs1y/fglrx.mod.o
LD [M] /tmp/catalyst.H8Xs1y/fglrx.ko
make: Leaving directory `/usr/src/linux-3.11.1-2-ARCH'
install: missing destination file operand after ‘fglrx.ko.gz’
Try 'install --help' for more information.
Please let me know if you need more information, and where/how I can get it.
Last edited by xeekei (2013-09-25 21:30:35)

Hey man have had the same issue.
How did you go about solving it?

[Solved] (EE) NVIDIA(0): Failed to load the NVIDIA kernel module

So, I did an arch base install today, rebooted and after that, basicly I
added kdemod to pacman.conf,
updated pacman,
rewrote pacman.conf (/mirrorlist),
pacman -Syu,
pacman -S kdemod,
pacman -S xorg-server xorg-xinit,
pacman -S nvidia (removed libgl; 7600GT),
wrote xorg.conf.
now when I startx:
FATAL: module nvidia not found.
(EE) NVIDIA(0): module nvidia not found.NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.
I tried reinstalling kernel26, nvidia, didn't work.
EDIT: reinstalled nvidia, worked after reboot.
* Also shutdown, modprobe.. is gone (command not found). So I pacmaned -S coreutils,
* which replaced mktemp with core/coreutils, didn't help.
* EDIT: `su -' solved that
not a clue, help needed,
thanks
Last edited by flocntl (2008-02-25 19:54:42)

can i see the output of
pacman -Q xorg-server nvidia
sudo modprobe -L | grep nvidia
cat /etc/X11/xorg.conf
edit: sorry
sudo modprobe -l | grep nvidia
edit2: recently replied on a similar thread, user used hwd -xa to generate a xorg.conf, then used aticonfig --initial... to generate a xorg.conf. this resulted in duplicate config entries.
try this.
reinstall xorg-server, nvidia. reboot. run `sudo nvidia-xconfig` only, then move the resulting file to /etc/X11/xorg.conf. then try startx
Last edited by brisbin33 (2009-03-09 20:27:58)

VMware keeps Rebuilding Kernel Modules [Solved]

Hi, and thanks. After the last kernel upgrade everytime I start vmware player the first instance to run will rebuild the kernel modules and there is a warning icon next to the "Blocking File System" entry in the build list. I am using the latest kernel 3.4.2.2-Arch, my vmware player is version 4.0.2 build-591240. It runs fine after it rebuilds but the warning icon has me concerned. Does anyone know what this is? Do I have to move up a vmware version?
thanks in advance for your help.
--jerry
Last edited by jk121960 (2012-06-27 20:04:08)

If anyone is interested, here is the complete console output when I run the player.
$ vmplayer
Logging to /tmp/vmware-citmkd/modconfig-9164.log
HostinfoReadDistroFile: could not open file/etc/redhat-release: 2
HostinfoReadDistroFile: could not open file/etc/redhat_version: 2
HostinfoReadDistroFile: could not open file/etc/sun-release: 2
HostinfoReadDistroFile: could not open file/etc/SuSE-release: 2
HostinfoReadDistroFile: could not open file/etc/novell-release: 2
HostinfoReadDistroFile: could not open file/etc/sles-release: 2
HostinfoReadDistroFile: could not open file/etc/debian_version: 2
HostinfoReadDistroFile: could not open file/etc/debian_release: 2
HostinfoReadDistroFile: could not open file/etc/mandrake-release: 2
HostinfoReadDistroFile: could not open file/etc/mandriva-release: 2
HostinfoReadDistroFile: could not open file/etc/mandrakelinux-release: 2
HostinfoReadDistroFile: could not open file/etc/turbolinux-release: 2
HostinfoReadDistroFile: could not open file/etc/fedora-release: 2
HostinfoReadDistroFile: could not open file/etc/gentoo-release: 2
HostinfoReadDistroFile: could not open file/etc/nld-release: 2
HostinfoReadDistroFile: could not open file/etc/lsb-release: 2
HostinfoReadDistroFile: could not open file/etc/annvix-release: 2
HostinfoReadDistroFile: Cannot work with empty file.
HostinfoReadDistroFile: could not open file/etc/arklinux-release: 2
HostinfoReadDistroFile: could not open file/etc/aurox-release: 2
HostinfoReadDistroFile: could not open file/etc/blackcat-release: 2
HostinfoReadDistroFile: could not open file/etc/cobalt-release: 2
HostinfoReadDistroFile: could not open file/etc/conectiva-release: 2
HostinfoReadDistroFile: could not open file/etc/immunix-release: 2
HostinfoReadDistroFile: could not open file/etc/knoppix_version: 2
HostinfoReadDistroFile: could not open file/etc/lfs-release: 2
HostinfoReadDistroFile: could not open file/etc/linuxppc-release: 2
HostinfoReadDistroFile: could not open file/etc/mklinux-release: 2
HostinfoReadDistroFile: could not open file/etc/pld-release: 2
HostinfoReadDistroFile: could not open file/etc/slackware-version: 2
HostinfoReadDistroFile: could not open file/etc/slackware-release: 2
HostinfoReadDistroFile: could not open file/etc/e-smith-release: 2
HostinfoReadDistroFile: could not open file/etc/release: 2
HostinfoReadDistroFile: could not open file/etc/tinysofa-release: 2
HostinfoReadDistroFile: could not open file/etc/ultrapenguin-release: 2
HostinfoReadDistroFile: could not open file/etc/UnitedLinux-release: 2
HostinfoReadDistroFile: could not open file/etc/va-release: 2
HostinfoReadDistroFile: could not open file/etc/yellowdog-release: 2
HostinfoOSData: Error: no distro file found
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): Pango-WARNING **: Failed to load Pango module '/usr/lib/vmware/libconf/lib/pango/1.6.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc'
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(vmware-gksu:9164): GLib-GObject-WARNING **: Two different plugins tried to register 'BasicEngineFc'.
(vmware-gksu:9164): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
Logging to /tmp/vmware-root/modconfig-9275.log
HostinfoReadDistroFile: could not open file/etc/redhat-release: 2
HostinfoReadDistroFile: could not open file/etc/redhat_version: 2
HostinfoReadDistroFile: could not open file/etc/sun-release: 2
HostinfoReadDistroFile: could not open file/etc/SuSE-release: 2
HostinfoReadDistroFile: could not open file/etc/novell-release: 2
HostinfoReadDistroFile: could not open file/etc/sles-release: 2
HostinfoReadDistroFile: could not open file/etc/debian_version: 2
HostinfoReadDistroFile: could not open file/etc/debian_release: 2
HostinfoReadDistroFile: could not open file/etc/mandrake-release: 2
HostinfoReadDistroFile: could not open file/etc/mandriva-release: 2
HostinfoReadDistroFile: could not open file/etc/mandrakelinux-release: 2
HostinfoReadDistroFile: could not open file/etc/turbolinux-release: 2
HostinfoReadDistroFile: could not open file/etc/fedora-release: 2
HostinfoReadDistroFile: could not open file/etc/gentoo-release: 2
HostinfoReadDistroFile: could not open file/etc/nld-release: 2
HostinfoReadDistroFile: could not open file/etc/lsb-release: 2
HostinfoReadDistroFile: could not open file/etc/annvix-release: 2
HostinfoReadDistroFile: Cannot work with empty file.
HostinfoReadDistroFile: could not open file/etc/arklinux-release: 2
HostinfoReadDistroFile: could not open file/etc/aurox-release: 2
HostinfoReadDistroFile: could not open file/etc/blackcat-release: 2
HostinfoReadDistroFile: could not open file/etc/cobalt-release: 2
HostinfoReadDistroFile: could not open file/etc/conectiva-release: 2
HostinfoReadDistroFile: could not open file/etc/immunix-release: 2
HostinfoReadDistroFile: could not open file/etc/knoppix_version: 2
HostinfoReadDistroFile: could not open file/etc/lfs-release: 2
HostinfoReadDistroFile: could not open file/etc/linuxppc-release: 2
HostinfoReadDistroFile: could not open file/etc/mklinux-release: 2
HostinfoReadDistroFile: could not open file/etc/pld-release: 2
HostinfoReadDistroFile: could not open file/etc/slackware-version: 2
HostinfoReadDistroFile: could not open file/etc/slackware-release: 2
HostinfoReadDistroFile: could not open file/etc/e-smith-release: 2
HostinfoReadDistroFile: could not open file/etc/release: 2
HostinfoReadDistroFile: could not open file/etc/tinysofa-release: 2
HostinfoReadDistroFile: could not open file/etc/ultrapenguin-release: 2
HostinfoReadDistroFile: could not open file/etc/UnitedLinux-release: 2
HostinfoReadDistroFile: could not open file/etc/va-release: 2
HostinfoReadDistroFile: could not open file/etc/yellowdog-release: 2
HostinfoOSData: Error: no distro file found
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
filename: /lib/modules/3.4.4-2-ARCH/misc/vmnet.ko
supported: external
license: GPL v2
description: VMware Virtual Networking Driver.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
ERROR: Module vmblock not found.
filename: /lib/modules/3.4.4-2-ARCH/misc/vmci.ko
supported: external
license: GPL v2
version: 9.1.18.0
description: VMware Virtual Machine Communication Interface (VMCI).
author: VMware, Inc.
srcversion: F659B534EA5CC5FFD4A08BF
alias: pci:v000015ADd00000740sv*sd*bc*sc*i*
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
parm: disable_host:Disable driver host personality - (default=0) (bool)
parm: disable_guest:Disable driver guest personality - (default=0) (bool)
parm: disable_msi:Disable MSI use in driver - (default=0) (bool)
parm: disable_msix:Disable MSI-X use in driver - (default=0) (bool)
filename: /lib/modules/3.4.4-2-ARCH/misc/vsock.ko
supported: external
alias: vmware_vsock
license: GPL v2
version: 9.1.1.0
description: VMware Virtual Socket Family
author: VMware, Inc.
srcversion: 5A37036862692504058A712
depends: vmci
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmmon-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driverLog.o
CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-root/modules/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/apic.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/task.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/hashFunc.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/comport.o
CC [M] /tmp/vmware-root/modules/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-root/modules/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-root/modules/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-root/modules/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmmon-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-root/modules/vmmon-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmnet-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
CC [M] /tmp/vmware-root/modules/vmnet-only/driver.o
CC [M] /tmp/vmware-root/modules/vmnet-only/hub.o
CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/bridge.o
CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o
CC [M] /tmp/vmware-root/modules/vmnet-only/procfs.o
CC [M] /tmp/vmware-root/modules/vmnet-only/smac_compat.o
CC [M] /tmp/vmware-root/modules/vmnet-only/smac.o
CC [M] /tmp/vmware-root/modules/vmnet-only/vnetEvent.o
CC [M] /tmp/vmware-root/modules/vmnet-only/vnetUserListener.o
LD [M] /tmp/vmware-root/modules/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-root/modules/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-root/modules/vmnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dentry.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/block.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/file.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/module.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/super.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/filesystem.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/stubs.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/inode.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/control.o
/tmp/vmware-root/modules/vmblock-only/linux/filesystem.c: In function 'FsOpReadSuper':
/tmp/vmware-root/modules/vmblock-only/linux/filesystem.c:528:4: error: implicit declaration of function 'd_alloc_root' [-Werror=implicit-function-declaration]
/tmp/vmware-root/modules/vmblock-only/linux/filesystem.c:528:15: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors
make[2]: *** [/tmp/vmware-root/modules/vmblock-only/linux/filesystem.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/tmp/vmware-root/modules/vmblock-only] Error 2
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make: *** [vmblock.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
CC [M] /tmp/vmware-root/modules/vmci-only/linux/driver.o
CC [M] /tmp/vmware-root/modules/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciDriver.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciResource.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciContext.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciHashtable.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciQPair.o
CC [M] /tmp/vmware-root/modules/vmci-only/common/vmciRoute.o
CC [M] /tmp/vmware-root/modules/vmci-only/driverLog.o
/tmp/vmware-root/modules/vmci-only/linux/driver.c: In function '__check_disable_host':
/tmp/vmware-root/modules/vmci-only/linux/driver.c:2498:1: warning: return from incompatible pointer type [enabled by default]
/tmp/vmware-root/modules/vmci-only/linux/driver.c: In function '__check_disable_guest':
/tmp/vmware-root/modules/vmci-only/linux/driver.c:2501:1: warning: return from incompatible pointer type [enabled by default]
/tmp/vmware-root/modules/vmci-only/linux/driver.c: In function '__check_disable_msi':
/tmp/vmware-root/modules/vmci-only/linux/driver.c:2504:1: warning: return from incompatible pointer type [enabled by default]
/tmp/vmware-root/modules/vmci-only/linux/driver.c: In function '__check_disable_msix':
/tmp/vmware-root/modules/vmci-only/linux/driver.c:2507:1: warning: return from incompatible pointer type [enabled by default]
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmci-only/vmci.mod.o
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
Building modules, stage 2.
MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vsock-only'
make -C /lib/modules/3.4.4-2-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.4.4-2-ARCH'
CC [M] /tmp/vmware-root/modules/vsock-only/linux/af_vsock.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/vsockAddr.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/notifyQState.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/util.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/stats.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/notify.o
CC [M] /tmp/vmware-root/modules/vsock-only/driverLog.o
LD [M] /tmp/vmware-root/modules/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vsock-only/vsock.mod.o
LD [M] /tmp/vmware-root/modules/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/linux-3.4.4-2-ARCH'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vsock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/vmware-root/modules/vsock-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Shared Memory Available done
filename: /lib/modules/3.4.4-2-ARCH/misc/vmmon.ko
supported: external
license: GPL v2
description: VMware Virtual Machine Monitor.
author: VMware, Inc.
depends:
vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
No value set for `/system/http_proxy/use_http_proxy'
No value set for `/system/proxy/mode'
No value set for `/system/http_proxy/use_http_proxy'
No value set for `/system/proxy/mode'
No value set for `/system/http_proxy/use_http_proxy'
No value set for `/system/proxy/mode'
$
Last edited by med1972 (2012-07-01 00:41:46)

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

[Solved] Failed to initialize the NVIDIA kernel module

Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)

Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00)

[SOLVED] i915 kernel module depends on acpi

Similar Messages

Maybe you are looking for