[Solved] IceWM can't show bitmap fonts without smoothing - how to fix?

http://cade.datamax.bg/away/icewm/
There are fonts in the menus - helvetica without smoothing. Kinda like Windows 3. I installed this package: https://aur.archlinux.org/packages.php?ID=40619 to get helvetica but it's not in this package. At least the helvetica like on screenshots. How do I install this font in Arch?
Last edited by Mr. Alex (2011-05-19 09:25:45)

The content of a directory is:
lrwxrwxrwx 1 root root 39 Apr 4 16:58 20-fix-globaladvance.conf -> ../conf.avail/20-fix-globaladvance.conf
lrwxrwxrwx 1 root root 51 Apr 4 17:02 20-unhint-small-dejavu-sans-mono.conf -> ../conf.avail/20-unhint-small-dejavu-sans-mono.conf
lrwxrwxrwx 1 root root 46 Apr 4 17:02 20-unhint-small-dejavu-sans.conf -> ../conf.avail/20-unhint-small-dejavu-sans.conf
lrwxrwxrwx 1 root root 47 Apr 4 17:02 20-unhint-small-dejavu-serif.conf -> ../conf.avail/20-unhint-small-dejavu-serif.conf
lrwxrwxrwx 1 root root 39 Apr 4 16:58 20-unhint-small-vera.conf -> ../conf.avail/20-unhint-small-vera.conf
lrwxrwxrwx 1 root root 42 Apr 4 16:58 29-replace-bitmap-fonts.conf -> ../conf.avail/29-replace-bitmap-fonts.conf
lrwxrwxrwx 1 root root 36 Apr 4 16:58 30-metric-aliases.conf -> ../conf.avail/30-metric-aliases.conf
lrwxrwxrwx 1 root root 33 Apr 4 16:58 30-urw-aliases.conf -> ../conf.avail/30-urw-aliases.conf
lrwxrwxrwx 1 root root 30 Apr 4 16:58 40-nonlatin.conf -> ../conf.avail/40-nonlatin.conf
lrwxrwxrwx 1 root root 27 Apr 4 16:58 45-latin.conf -> ../conf.avail/45-latin.conf
lrwxrwxrwx 1 root root 31 Apr 4 16:58 49-sansserif.conf -> ../conf.avail/49-sansserif.conf
lrwxrwxrwx 1 root root 26 Apr 4 16:58 50-user.conf -> ../conf.avail/50-user.conf
lrwxrwxrwx 1 root root 27 Apr 4 16:58 51-local.conf -> ../conf.avail/51-local.conf
lrwxrwxrwx 1 root root 38 Apr 4 17:02 57-dejavu-sans-mono.conf -> ../conf.avail/57-dejavu-sans-mono.conf
lrwxrwxrwx 1 root root 33 Apr 4 17:02 57-dejavu-sans.conf -> ../conf.avail/57-dejavu-sans.conf
lrwxrwxrwx 1 root root 34 Apr 4 17:02 57-dejavu-serif.conf -> ../conf.avail/57-dejavu-serif.conf
lrwxrwxrwx 1 root root 27 Apr 4 16:58 60-latin.conf -> ../conf.avail/60-latin.conf
lrwxrwxrwx 1 root root 35 Apr 4 16:58 65-fonts-persian.conf -> ../conf.avail/65-fonts-persian.conf
lrwxrwxrwx 1 root root 30 Apr 4 16:58 65-nonlatin.conf -> ../conf.avail/65-nonlatin.conf
lrwxrwxrwx 1 root root 29 Apr 4 16:58 69-unifont.conf -> ../conf.avail/69-unifont.conf
lrwxrwxrwx 1 root root 33 Apr 5 11:30 70-yes-bitmaps.conf -> ../conf.avail/70-yes-bitmaps.conf
lrwxrwxrwx 1 root root 31 Apr 4 16:58 80-delicious.conf -> ../conf.avail/80-delicious.conf
lrwxrwxrwx 1 root root 31 Apr 4 16:58 90-synthetic.conf -> ../conf.avail/90-synthetic.conf
-rw-r--r-- 1 root root 959 Nov 29 2009 README

Similar Messages

Why Adobe CC software can only show regular font weight for some fonts?

Why Adobe CC software can only show regular font weight for some fonts?
I can use those fonts in different font weights in the CS3 in the same computer; however it doesn't work on CC.
Anyone can help~

And have you applied the patch at Crash | Launch, selecting Type tool?

I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

You'll have to transfer them from the pc to the mac.
There are some options
Importing personal photos & videos from device to your computer
http://support.apple.com/kb/HT4083?viewlocale=en_US&locale=en_US
Managing photos/videos
Iphoto app for iOS
http://www.apple.com/support/ios/iphoto/
photo manager pro
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8
Photo transfer app
http://www.phototransferapp.com
Dropbox
https://www.dropbox.com/referrals/NTMzMjg0NjkzOQ?src=global9
Picasa
http://picasa.google.com
photo manager pro
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

The Safari can't work in my iPad. How to fix it?

The Safari can't work in my iPad.
How to fix it or re-install it ?

If there's a bug with YouTube, the YouTube developers would have to fix it. You cannot fix other people's apps.
Try re-loafing the YouTube app - it may have been a temporary glitch.

I upgraded my iphone iso 6. now i can see my daughters texts. anyone know how to fix. can't get thru to apple.

I upgraded my iphone iso 6. now i can see my daughters texts. anyone know how to fix it?

I checked it. Her number isn't on it. Only has my number and my email.

Illustrator can't use bitmap fonts?

In the list of available fonts, Illustrator CS5 just doesn't show a particular bitmap font (maybe it's skipping some others too, but I didn't check). I'm sure the font works well, in fact it shows up and works normally in Photoshop, and I also use it for interface in some other software that allows customizing of interface - in a few years never had a problem. If it matters, it's a fon file.
Digging around the internet I didn't see anybody complaining about it, the only thing I've found is an article for beginners that talks about using bitmap fonts as if it were perfectly possible.
So, how can I use this font in my documents? Or will I have to design everything in Illustrator and then finish it in Photoshop.
Edit: if it matters I'm on Windows 7 64bit.
Message was edited by: RayRayTea

That's true, but what made me think Illustrator should be able to read a puny bitmap font is (among other things) this piece - I wouldn't trust it too much ("Pixel fonts are quite popular these days. It all started in Flash…") but it actually has screenshots, so I assumed they must have materialized from somewhere (and what it says about positioning of the lines is true, so it probably knows what it's talking about).
Edit: and I just noticed… the fonts I actually have as "Hidden" (in the Font control panel) show up in Illustrator all right - Comic Sans says hello (I should have uninstalled it instead of hiding it I guess). Heh…

JDevelper10g can't show the font in buttons!

i installed jdeveloper10g preview edition,and when running it ,the jdev windows can't show fonts on button.
our os environment is windows xp pro(eng),and switch to chinese region.

The problem is the source for the image, you have
<img src="X:\CVS Norge\94 Prosjekter\945
Trading\SovReflex\Bilder\Thumbs\litenalarmpakke_it400.jpg"
alt="test"
border="0" align="top" id=""
onclick="MM_goToURL('parent','produkter/prodDetal.cfm?ProdID=21');return
document.MM_returnValue" />
So the source for the image is referring to a filepath, ie
X:\ rather than a
web path, so you`ll only see the image on your computer
connected to the X
drive. You need to change it to a web relative path, and then
it will work.
Gareth
http://www.phploginsuite.co.uk/
PHP Login Suite V2 - 34 Server Behaviors to build a complete
Login system.

Why Cat6500 PE just can only show VPN label without IGP label ?

Hi,there:
We have a couple Cat6500 as our MPLS/VPN P, PE routers. But from the following first command output, we just only can see one label (VPN lable) 339 imposed,can't see the IGP label imposed.
From the second command we can see both IGP and VPN labels (339,224 or 339,20)are imposed.
Is there anybody can point out why the first command just can only show the VPN label ?
We're using Sup720 supervisor and 12.2(18)SXF9 IOS.
6500PE#sh ip cef vrf XYZ 172.212.0.0 255.255.0.0 detail
172.212.0.0/16, version 321, epoch 0
0 packets, 0 bytes
tag information set, all rewrites owned
local tag: VPN-route-head
fast tag rewrite with
Recursive rewrite via 172.17.0.213/32, tags imposed {339}
via 172.17.0.213, 0 dependencies, recursive
next hop 192.168.131.128, TenGigabitEthernet2/5 via 172.17.0.213/32 (Default)
valid adjacency
tag rewrite with
Recursive rewrite via 172.17.0.213/32, tags imposed {339}
Recursive load sharing using 172.17.0.213/32.
6500PE#sh mls cef vrf XYA 172.212.0.0
Codes: decap - Decapsulation, + - Push Label
Index Prefix Adjacency
108775 172.212.0.0/16 Te2/5 339(+),224(+) (Hash: 0001)
Te1/5 339(+),20(+) (Hash: 0002)
6500PE

Hi,Martin:
Thanks for your reply.
I tried these two commands, but just only could get IGP labels(20 and 224), no way to see the VPN label(339).
Any idea ?
Jerry
6500PE#sh ip cef 172.17.0.213 255.255.255.255 detail
172.17.0.213/32, version 1080, epoch 0
0 packets, 0 bytes
tag information set, shared, all rewrites owned
local tag: 171
via 192.168.130.128, TenGigabitEthernet1/5, 11 dependencies
traffic share 1
next hop 192.168.130.128, TenGigabitEthernet1/5
valid adjacency
tag rewrite with Te1/5, 192.168.130.128, tags imposed: {20}
via 192.168.131.128, TenGigabitEthernet2/5, 43 dependencies
traffic share 1
next hop 192.168.131.128, TenGigabitEthernet2/5
valid adjacency
tag rewrite with Te2/5, 192.168.131.128, tags imposed: {224}
0 packets, 0 bytes switched through the prefix
tmstats: external 0 packets, 0 bytes
internal 0 packets, 0 bytes
6500PE#sh
6500PE#show mpls forwarding-table 172.17.0.213 32 detail
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
171 20 172.17.0.213/32 0 Te1/5 192.168.130.128
MAC/Encaps=14/18, MRU=1548, Tag Stack{20}
001A6C9F0A44001CF9B3D0008847 00014000
No output feature configured
Per-destination load-sharing, slots: 0 2 4 6 8 10 12 14
224 172.17.0.213/32 0 Te2/5 192.168.131.128
MAC/Encaps=14/18, MRU=1548, Tag Stack{224}
001A6C9F12BC001CF9B3D0008847 000E0000
No output feature configured
Per-destination load-sharing, slots: 1 3 5 7 9 11 13 15
6500PE#

Can't use bitmap font in GUI apps

I like the look of bitmap fonts and I used to be able to use them in GUI apps such as GTK apps.
For the last few months whenever I try to start GUI app with a bitmap font selected the application crashes. Always with the same error message about cairo-scaled-font.
For example, here is my terminal output when I try to start dwb using the bitmap font Lemon as my default font:
dwb: cairo-scaled-font.c:459: _cairo_scaled_glyph_page_destroy: Assertion '!scaled_font->cache_frozen' failed.
This problem is not limited to just dwb but any GUI app when I try to use any bitmap font.
I've tried googling the problem and the only advice I could find was to run fc-cache -fv, which didn't fix the issue.
Any help would be appreciated.

I normally use BSPWM as my window manager, and I have just discovered that If I try to start dwb in Gnome it actually works!
This isn't really a solution for me because I spend most of my time in BSPWM, but it's interesting.

Is there anything Artistic/creative that you can use a BitMap font for

I was cleaning out my duplicate fonts and have some that have a bitmap versions. I was reading that postscript and true type are better to use. But---Before I empty the trash I was wondering is there anything artistic (maybe grungy or something) that a bitmap font could be used for that a true type or post script font would not do, even if its not used for legible text.
Thanks
on a mac, cs4

If you like a font, keep it. I suggest tat you use a font manager. I've got about 21,000 fonts in my library but I only keep about 300 activated. I use a font Font Explorer, but there are many good font managers out there.

I have an iPad screen that won't swipe. I cannot connect it to Itunes because it's locked with a pass code which I can't enter because I can't swipe. Any suggestions on how to fix this?

I have a 16GM Mini IPad. The screen won't swipe. I tried resetting it but that didn't work. I attempted to connect to ITunes to try a restore but I can't do that. This is because the IPad is locked with a pass code which I can't enter because I can't swipe. Does anyone have any suggestions on how to fix this?

If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any suggestions on how to fix this?

I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any ideas on what may have caused this and to fix it?

If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

My IPOD touch got wet and now only shows a white screen. How to fix?

My IPOD touch got wet (it was not submerged in water, just rained on) and now only shows a white screen. How can I fix this? I already dried it in rice, and reinstalled it on ITUNES.

unless you have apple care which even that probably doesnt cover water damage. youre gonna need to buy a new screen. probably set you back $60 something. look up ipod touch 4g lcd screen in google and look for sites like amazon or something. unless you wanna have apple charge you like 100 bucks for it or probably more

Can I show different fonts and colors text on 1 multi-line text fields?

I want to format different messages on 1 mutli-line field with different fonts and colors for the heading lines. Can I do that in Forms 6i ?

You must use in trigger Post-query the sentence:
Example:
DECLARE
cur_itm VARCHAR2(80);
cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
Set_Item_Instance_Property( cur_itm, CURRENT_RECORD,
VISUAL_ATTRIBUTE,'My_Favorite_Named_Attribute');
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;

[Solved] Dolphin won't show video thumbnailer without root privileges

Hi, I have this issue that the video thumbnailer thing doesn't work if I dont run dolphin with root settings ('kdesu dolphin').
There is some difference in my settings but I dunno what it is.
Here's a screenshot:
Edit: Looks like none of my thumbnailers work with my user settings.
Last edited by algorythm (2009-09-30 12:34:17)

Well here's screenie of my settings too:
E: and a bigger one: http://img29.imageshack.us/img29/7638/snapshot3y.png
E: Solved by deleting old settings.
Last edited by algorythm (2009-09-30 12:33:55)

[Solved] IceWM can't show bitmap fonts without smoothing - how to fix?

Similar Messages

Maybe you are looking for