[SOLVED] ImgBurn on Wine 1.5.13 - device not detected

Hi all,
I have installed imgburn 2.5.7.0 on wine 1.5.13 but my optical drive is not detected. Any ideas?
Thx.
Last edited by toni (2012-10-16 00:01:01)

karol wrote:
In the console output I saw that it whined about not finding /dev/sg* devices.
Run 'sudo modprobe sg' and try again. Worked for me.
Out of curiosity, why are you using ImgBurn under wine and not some Linux-native program?
Great! It worked, many thanks.
I always have used Linux-native programs for burning CD/DVDs (Brasero and k3b, I think they are great tools) but last day I downloaded and iso for my videogame console and I burnt it using Brasero but the iso was not working so I thought that maybe there was a problem with Brasero and since a lot of people was recommending to use ImgBurn, I decided to use it. Finally, I discovered that the problem was not in Brasero, iso burnt with ImgBurn (from Win because wine was not detecting my optical drive) was not working so I discovered the iso was being the problem.
Sorry for my ignorance, but what is ng?
Cheers.

Similar Messages

Audio device not detected in control panels

+Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
I also tried installing Daniel_K's driver pack to no avail.
Any ideas?
Thanks,
Glorfindel

/Hi Glorfindel,
Did?you?reinstall the applications from the installation cd?
Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net.

Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solved

Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts

M-audio device not detected

I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.

Is the device turned on? The blue light should be solid blue (not flashing).
If it never goes solid blue, try a different cable, try using the adapter power (not bus power). Run System Profiler and check that your firewire bus does not say "No information found". Make sure you have the latest drivers installed. Is the audio device shown in the System Preferences -> Sound drivers? Is the audio device one of the few compatible ones with PT M-Powered?
Never hot plug the firewire cable, especially if any device is bus powered.
See where that lot gets you...

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

Re: Satellite L50-B05D can't load Win 8.1 - bootable device not found

Hi
I have a Satellite L50-B05D and I recently downloaded the bios update and I applied it to my system. When I did it said that it contained the update already. After being on the laptop for a while, I closed the lid and it turnt off. When I turnt it back on Windows wouldn't load up and a message of bootable device not found occured.
Any help is appreciated
Thanks

Did you check the HDD status on the first BIOS page?
If HDD is OK, the first BIOS page should provide the info about the connected HDD (HDD name)
At the other hand the HDD might be faulty if its not listed on the first BIOS page.

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

[FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
Diabolius

BTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

Pavilion dv4-1241tx wwan device not detected in win 7.Is there any wwan device at all?

My pavilion dv4-1241tx can not detect wwan device when installing hp connection manager in windows 7.. pls help

Some of the DV4-1000 series does support WWAN and some of them dont. Install drivers from here and check if WWAN module gets detected in Device Manager under Modems
Also, Refer below link for more info
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01712976&lc=en&product=3769214#N62
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Audio device not detected

Product:
HP Pavilion dv6707us Entertainment Notebook PC
SN: [Personal Information Removed]
Product Number: KC323UA#ABA
OS: Windows Vista (32-bit)
The OS does not detect the audio device. Under the device manager, there is no entry for "Sound, Video, and game controllers"
The "Windows Audio Service" is automatically started.
Is there a way to check if the audio device has stopped working or if this problem is a software issue? Should we do a fresh Vista Installation?

Hello deburgess7,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error 3 - Skipping. Device not detected. Bold & PocketMac sync issue

I am having issues getting my MacBook to recognize my BB Bold when trying to sync with PocketMac Sync Manager. When connecting through a USB - the device is not detected and so a sync can not be performed.
Blackberry support have instructed me to install/uninstall drivers and pocketmac which I have done as instructed yet nothing is working.
PLEASE can anyone help with solving this??

This worked for me finally:
Mac needs to "detect" your BB
Go to the BB menu (general)
On the BB - go to Options
Then go to Memory
There are a number of settings here
Media Card = On
Encryption = None
MTP = ON
Mas Storage = On
Here's the ONE:
AUTO ENABLE MASS STORAGE MODE WHEN CONNECTED = YES
As soon as I did that - the next time I synched - the Mac "found" the BB and the BB PIN was there.
Synch for Contacts was very good.
Good Luck!

Audigy 2 ZS: Stero Sound, but not device not detect

I'm using an Audigy 2 ZS card, driver version 5.2..442 with Windows XP.
The card produces stereo sound, but nothing in the other speakers in my 5. setup.
When I try to load up the Creative Speaker Settings, I got a 'Speaker Settings' error dialog stating "The audio device supported by this application is not detected."
There are no apparent problems with the device when checking the device manager.
Thanks for any help.

I solved my problem by changing to driver version 5.2.3.00. Creative Applications such as speaker settings load without error messages, and sound is 5., not just stero.

Lumia 620 - Device not detected

Hi,
I've been using my 620 for a month now with no problems.I use the phone for developing purposes (Visual Studio 2012 + Windows 8 Pro).
Around 8 days ago, I received a pack of updates of the Nokia bundled apps which I installed and after that, when I connect the phone via the USB cable, the Phone is not detected on Windows.
I read lots of other threads about this kind of problems, even went through reinstalling all the Windows Phone SDK, reinstalled drivers (http://support.microsoft.com/kb/2749484), tried 4 different USB cables, on all the ports of my computer, tried 5 different computers too (two of which have Windows 7, three have Windows 8), removing the SD card, and the Phone still is not detected. The charging icon appears and the Phone charges OK though.
The Phone does not appear on Windows Device Manager under any kind of label (No Unrecognized Device either), Windows Explorer does not show any drive (MTP), its like the cable is not connected (although it charges without a problem).
I don't have the Amber update yet.
Is there any kind of setting (possibly hidden?) that controls the USB behavior of the phone? I read there are no Diagnostics tools for WP8, but, is there any way I can check if there is a hardware problem?
Thanks in advance!

The vol down + power is only a reboot. Perhaps you might consider a reset from Settings>about>reset your phone.

Output device not detected

My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

[SOLVED] ImgBurn on Wine 1.5.13 - device not detected

Similar Messages

Maybe you are looking for