[SOLVED] Inkscape bug when saving

Hello,
I need help. As I specified in the subject, Inkscape crashes when I try to save my work with "Save as" or "Save a copy ...". In the Following, the output (useless I believe):
(inkscape:27996): GLib-GObject-WARNING **: gsignal.c:2459: signal `child-added' is invalid for instance `0x3e905d0'
Emergency save activated!
Emergency save completed. Inkscape will close now.
If you can reproduce this crash, please file a bug at www.inkscape.org
with a detailed description of the steps leading to the crash, so we can fix it.
I am running archlinux with kde 4.9.1 and Inkscape 0.48.3.1 r9886. Any help is very appreciated. Or, at least, is someone experiencing the same issue?
Thank you
Last edited by @ilio (2012-09-12 10:55:05)

Stebalien wrote:That output isn't useless. It contains instructions on what to do. If this happens reliably, file a report. The Inkscape developers should be able to help you debug it.
Yes... I meant useless in debugging. I am sending a bug report.
Thanks
Edit: Sent as bug#1049179.
Last edited by @ilio (2012-09-11 15:09:44)

Similar Messages

[SOLVED] Inkscape bug after last system update

After the last system update I started to have problems in Inkscape when I tried to adjust the color and alpha sliders to maximum values. They would only go up to 245. This means that a lot of basic colors are not achievable anymore, and the opacity cannot be set to maximum, which basically makes Inkscape unusable. After googling it for a while, I understood that there was a similar problem some time ago with Inkscape version 0.46-7 and GTK+ (here is a far better description of the bug, https://bugzilla.redhat.com/show_bug.cgi?id=467431), but this problem was assumably fixed in a later version (for the Red Hat package anyway). I am using at the moment Inkscape 0.46-10 and GTK2. Anyone with similar problems? Please help and thank you very much!
Last edited by anca (2009-04-02 11:20:53)

anca wrote:
I tried setting the values manually... I even tried, believe it or not, to edit the XML file! Maybe I'm doing something wrong. Could you please describe in more detail what exactly you did to fix it? I have a lot of images to finish and he deadline is getting scaringly close . Anyway, thank you so much for your feed-back!
Anca
under the fill and stroke dialogue (ctrl-f), there is a small input box called RGBA which is just that, 1 byte for each channel. edit it at will. you will notice the sliders dont go past 245, but the value used by inkscape is the hex number there

Intermittent Bug when saving pdf files in Illustrator CS6

I save a pdf file in Illustrator CS6 with a specific art board size. When I open it in Acrobat the size is off. When our print's RIP's the file, it is off the same amount. I will re-open it in Illustrator and re-save it and just change the name, the artboard is then correct. This is very intermittent. It has happened on two copies of CS6. Both prograns are current with the updates. I am on a iMac running OS 10.6.8.

Document size is: 36.01 x 98.12
I can open up both documents in Illustrator and they are identical.
We have been using these presets for a couple of years without issue. The problem started happening about 3 weeks ago on 2 seperate computers. We have not seen the problem with CS5.5 and earlier.
Below are the preset settings summary:
Warnings
Adobe PDF Preset: CCC High Res PDF
Compatibility: Acrobat 6 (PDF 1.5)
Standard: None
Description
          [Based on 'CCC High Res PDF'] [Based on 'CCC High Res PDF
          04-28-08'] PDF Workflow For Custom Color Corporation Output
General
          Preserve Illustrator Editing Capabilities: On
          Embed Page Thumbnails: On
          View PDF File after Saving: Off
          Optimize for Fast Web View: Off
          Create Acrobat Layers from Top-Level Layers: Off
Compression
          Color Bitmap Images:
                    No Sampling Change
                    Compression: None
          Grayscale Bitmap Images:
                    No Sampling Change
                    Compression: None
          Monochrome Bitmap Images:
                    No Sampling Change
                    Compression: None
          Compress Text and Line Art: Off
Marks and Bleeds
          Trim Marks: Off
          Registration Marks: Off
          Color Bars: Off
          Page Information: Off
          Printer Mark Type: Roman
          Trim Mark Weight: 0.25 pt
          Offset from Artboard: 0.083 in
          Use Document Bleed: On
Output
          Color:
                    Color Conversion: No Conversion
                    Profile Inclusion Policy: Include Tagged Source Profiles
Advanced
          Subset embedded fonts below: 100 %
Security
          Document Open Password: Off
          Permissions Password: Off
          Encryption Level: High (128-bit RC4) - Acrobat 5 and later
on: Off
          Printer Mark Type: Roman
          Trim Mark Weight: 0.25 pt
          Offset from Artboard: 0.083 in
          Bleed Left: 0 in
          Bleed Right: 0 in
          Bleed Top: 0 in
          Bleed Bottom: 0 in
Output
          Color:
                    Color Conversion: No Conversion
                    Profile Inclusion Policy: Include Tagged Source Profiles
Advanced
          Subset embedded fonts below: 100 %
Security
          Document Open Password: Off
          Permissions Password: Off
          Encryption Level: High (128-bit RC4) - Acrobat 5 and later

Bug when saving transparent png

I just saved a few pngs with transparent backgrounds and somehow the icons for those new images are being merged or overlaid with previously saved jpgs in my photo stream. When I open them, I see the picture I expect so there's no damage occurring, just funky icons. When I viewed the same images from the photo stream on my iPhone 4 and AppleTV2, the same behavior occurred with those transparent png files as well.

Hi Ignacio,
Well I sort of owe you guys an apology as it appears to be an iPad/iOS issue actually. Apparently I've never tried sending a transparent png to either my iPhone or iPad until learning/using Photoshop Touch (which I'm really enjoying btw).
But to answer your questions anyway, I was opening them on my iPad/iPhone in the Photos app and on my AppleTV in the Photostream there.
I made a quick transparent png from my Photoshop CS3 as well as downloading one from a Google search, all which had the same overlapping results.
I grabbed a screen shot for you, and blurred out the icons of images I think you'd rather not see ;-). Weird thing though too, which also points to this being an Apple issue, is that by accident, my first image, I saved as a png but with the background layer unlocked (being layer zero) and when I dragged it into this email, it overlaid the picture over the body of the email so that the black areas where transparent. So I dragged it out, resaved as a jpg but now I can't repeat the problem with the png, as I was going to create a screen shot of that for you as well. Either way, the icons on my desktop behave as normal and the images all open as normal. They all just get goofed up when displaying them in iOS as icons before actually opening the pictures.
So in this capture, there are six images with overlapping icons where the intended transparent png is on top of some random image pulled from the photostream.
Thanks again,
Eric

Bug when saving - files are all inverted and transparent

Hi there,
I've been working on a job for a few hours now and I have still have it open in photoshop CS5 extended.
Basically if I save it out in ANY format (tiff, psb, psd, jpg) it is inverted and the transparency is all messed up.. when I look at it in bridge or reopen it in photoshop or preview, it's the same.
I have the file still open in photoshop and I'm scared to close it because it looks just fine on screen but when I try to do anything it is behaving strangely. for example if I convert to CMYK it goes to the inverted image which it saves out.
I deleted all the layers I am not using and rasterized all the dynamic objects and it's still doing the same thing
Is there any way I can save my file ? I've been working on it for a long time ???
Thanks in advance for any help.

After numerous attempts to rescue the file, I ended up having to recreate it..
I think it was down to a memory bug.. I did empty the clipboard as well during the creation of the file because I was having problems.. maybe it was down to that but I think it actually just became corrupted somehow !
I must admit, it's the first time I've encountered this problem in 15 years of working with photoshop !!
Many thanks for your replies !

BUG? ORA-01461 in Unit Tester when saving a long Dynamic Value Query

I get an ORA-01461 "can bind a LONG value only for insert into a LONG column" error when saving a Test Implementation with a Dynamic Value Query whose length of the SQL statement is roughly 2,000 characters - I'm UNIONing ALL about 30 test case values together, but it seems to be choking on such a long SQL string for some reason....
I am running version Early Adopter Release #2 (2.1.0.63), build MAIN-63.10.
Thoughts?

Confirmed.
Bug 9119144: ORA-01461 IN UNIT TESTER WHEN SAVING A LONG DYNAMIC VALUE QUERY (OR OTHER CLOB)
Brian Jeffries
SQL Developer Team

[SOLVED] Open Office Calc Freezes When Saving

Hello everyone. I have a VERY simple spreadsheet (not a single formula at all, only three columns) that I was updating tonight. I just changed a few fields and went to save it. Unfortunately, it froze. Even worse, I can reproduce this every time I open it and save. Once in a while I can save the document, but most of the time I cannot. I even tried creating a new Calc spreadsheet and am having the same issue.
Are any of you having the same issue?
Last edited by jlacroix (2010-08-26 12:02:14)

urist wrote:I've got the same issue. I "solved" the problem by saving everything as an Excel sheet (xls). For some reason, it works just fine with those.
Thanks! I'll do that when I get home.

Errors when saving to SMB mounts (a thorough examination)

Several of the users I support have reported the following issue when trying to save files to the network from Photoshop. I have found several threads about this on both the Adobe forums and the Mac forums. However, in most of the threads the information provided is incomplete or does not control for enough variables. And the result is that Adobe seems to blame Apple, and Apple seems to blame Adobe. So blame aside, here is information that I hope helps Adobe solve the issue at hand.
When saving to a mounted SMB point, users report one of two errors:
Could not save <filename> because of a program error
Could not save <filename> because write access was not granted
I can replicate the issue on:
Lion 10.7.X with Photoshop CS 5
Lion 10.7.X with Photoshop CS 5.1
Snow Leopard 10.6.X with Photoshop CS 5
Snow Leopard 10.6.X with Photoshop CS 5.1
Details:
We have only seen this error in Photoshop. << Adobe has seen the same problems in several other applications >>
I have not tested out whether the issue applies to any other products in the CS suite.
At first I thought the issue might have to do with permissions, but it does not. I have reapplied permissions and the issue persists. And it affects all users, including Domain Admins, such as me, who have no R/W restrictions at any level.
The issue only occurs when Finder is in a view that shows a thumbnail/preview of the image.
Switching Finder to list mode resolves the error in all scenarios
So far I can replicate this with any file on any mount on any of our servers
It only occurs on mounted network points (ie - if I move the files locally, no errors are encountered)
For the following tests, presume the following:
Source folder: smb://example/source/folder
Target folder: smb://example/source/folder
Target sub-folder: smb://example/source/folder/sub
Here are the steps I tested:
Opened the file problem_file.psd.
A warning pops up prompting me to resolve a font vector issue, I chose "Update"
Note: that this error does not pop up for every file, just the original file I worked with, but this warning has nothing to do with the errors being received
Moved a layer so that there would be a change to save
Clicked save
Received the error: "Could not save <filename> because of a program error" << probably related to the known MacOS bug on SMB, or a known Finder/thumbnailing bug >>
The original file, problem_file.psd, is *DELETED* (very problematic) << Known MacOS bug in SMB service, Apple is working on it >>
Then I tested with multiple variations of the following to conrol for things such as layers or font issues:
To eliminate the source file being the issue, I used a .png file that I had created locally with the OS-X screen shot keyboard command. This eliminated layers and fonts as issues.
In step 2 I chose to not update the font vector issue
In step 4 I tried saving as different file types (.jpg, .png, .gif)
Prior to step 6 I flattend the image to eliminate fonts and layers. This eliminated layers and fonts as issues.
Prior to step 6 I flattened the image, duplicate the image, closed the original (without saving), and attempted to save the new duplicate. This eliminated layers and fonts as issues.
Each variation still resulted in "Could not save <filename> because of a program error" and resulted in the deletion of the source file.
Next I controlled for saving image previews:
Photoshop -> Preferences -> File Handling
Under File Saving Options -> Image Previews, I set it to "Never Save" previews
Now when I repeated the tests from aobve, I receved the error "Could not save <filename> because write access was not granted".
Next I controlled for .DS_store files:
Disabled .DS_Store file creation on remotely mounted points.
Deleted the .DS_Store file for the source folder
Verified that .ds_store files were not being created on remotely mounted points
Ran the tests above, and the issue persisted: "Could not save <filename> because write access was not granted"
Now I decided to test sub-folders:
Created a target sub-folder.
Repeated the test above, and its variations, but saving the problem_file.psd to the target sub-folder.
Still received one of the two errors, depending on the variation, but the source file is no longer deleted. This make sense because saving in another directory is really a "save as", and one would not expect safe saving (talked about more later) to affect source files in this scenario.
Sort of a Solution:
Open the file from Finder
Depending on the Finder view, Finder shows a thumnail of the image
Go back to Finder and select a different file
Make changes to the file
Save the file
No error is received
This is when I discovered that the error only occurs when Finder is in a view that shows a thumbnail/preview of the image. Further testing of Finder show that in Cover Flow the error only occurs for the selected image. For example:
Cover flow shows thumbnails/previews of files: A, B, C, D, E
Open A
In Cover Flow select file B
The thumnails of of files A, B, C, D, E are still visible
Make a change to the open file
Save the change
No error is received
This shows that Finder is treating the thumbnails/previews of unselected files different than selected files.
An Interesting Twist:
If from the last scenario with Cover Flow...
Open file A
Go back to Finder and select a different file
Then make a change and attempt to save to the target sub-folder
Receive the error "Could not save <filename>" because of a program error.
Discussion:
Photoshop does something called safe saving.
Photoshop saves the current document to a temporary file with a unique name
Photoshop deletes the original file << this is incorrect >>
Photoshop moves the temporary file to a file with the name of the original file that was deleted in step 2 << incorrect: the temp file replaces the original with an OS call to a function that is supposed to be an atomic operation >>
However, you can see that "safe saving" is misnamed, because while the original is deleted, Photoshop does not appear to be correctly ensuring that permissions exist to allow the temporary file to be ranemd or that the temporary file was renamed without error. Photoshop is either:
Not checking for the error << yes, it is >>
Checking for the permissions and not catching the error << incorrect >>
Checking for the permissions and giving an error to generic to discern the exact problem from. << also incorrect >>
Somewhere there is a conflict (perhaps a race condition) between:
Photoshop creating the temporary file
The server applying permission to the newly created temporary file
OS-X reporting the file has been created
Photoshop deleting the original file
Photoshop saving the new file
Finder updating the thumbnail of the file
As I've shown here, the problem doesn't seem to reside fully with Apple or fully with Adobe. Hopefully this post provides enough information for some clever engineer to create a fix.
My information about safe saving is from an Adobe mod on a previous thread regarding this issue << and copied incorrectly, plus added bad assumptions>>. He detailed the process and also explained that Photoshop uses OS APIs to create and delete the files during safe saving. If his details are accurate, it seems that a temporary fix would at least change the safe saving process to the following:
Photoshop saves the current document to a temporary file with a unique name
Photoshop moves the original file to a temporary backup file (original-file-name.original-extension.bak)
Photoshop moves the temporary file to a file with the name of the original file moved in step 3
Photoshop checks to make sure that the temporary file has been succesfully renamed
If the temporary file has successfully been renamed, it deletes the backup file from step 2 OR if the temporary file has failed to be renamed, the backup is returned to its original file name
The appropriate error message, if any, is displayed
A Few Sources:
http://adobe.hosted.jivesoftware.com/message/4016324
http://forums.adobe.com/thread/732422
https://discussions.apple.com/thread/3380971?start=0&tstart=0

You got several details wrong.
And it sounds like you are describing 2 known MacOS bugs:
1) The OS fails when creating or swapping files on SMB servers, and this happens more often on files that have a resource fork.
2) The Finder/QuickLook/Thumbnailing holds a file busy when it should not, causing program errors or file is busy errors.
We did as much as we could to work around these issues in Photoshop CS6 - after spending a lot of time debugging the OS issues and working with Apple.
Apple is still working on proper fixes within the OS.

Office 2013 hangs when saving files to local profile locations on Windows 2012 server

We installed Office 2013 a few weeks ago instead of Office 2003 on a Windows 2012 standard terminal server. We installed the last updates and Office is up-to-date now, but we experience problems with saving word, excel and powerpoint documents when we start
a new/clean document. It's not possible to save our documents to the local profile (desktop, documents etc.), but it's no problem to save our stuff to a network share on a different server.
Word is not responding after pressing save or save as and after a few seconds we see the 'microsoft is looking for a solution and will restart microsoft word'.
We did a complete reinstall of Office 2013 and removed the old installation with the removal tool from the microsoft website, without luck. We have the same saving issues with Office 2010, so it's not an Office 2013 issue.
We were looking in the access/rights on the terminal server, because we thought that it was an access/rights issue. But unfortunately we have the same problem with an domain admin user.
I tried to disable DEP and my AVG 2012 antivirus, but this steps are also not the issue.
I'm looking for a solution and i'm working on this case for a few days now. It gives me a headache when i'm thinking about a clean installation of this server. So please contact me when you have a solution or a tip to solve this problems!
Thanks!

Hi,
In regarding of the issue, it may be caused a lot of reasons. Please check to see whether the following link is helpful:
https://support.microsoft.com/kb/313937/en-gb
http://support.microsoft.com/kb/921541/en-gb?p=1
http://support.microsoft.com/kb/271513
Then Office hang when saving the file also may be caused by a printer installation.
Check to see the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
If you could upload the event log, I'll do deeply
research.
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
phil

I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

Error message when saving an Interaction Record: Document distributed

Hello experts,
We are currently getting error message: "Document is being distributed - changes are not possible" when saving an Interaction Record in Web IC (We use CRM 6 - 2007).
We've noticed that saving an interaction record triggers an outbound BDoc of type "BUS_TRANS_MSG". In order to prevent this BDoc to be generated, we deactivated the processing for the One-Order BDoc with transaction SMW3_0. However, this had the side effect that quotations were not replicated from CRM to ECC so we can't really use this approach.
Has anyone faced this issue before? Do you know how to fix it?
Thanks.

Hi
The initital status of Interaction record must ensure that transaction is not relevant for distribution. This ensures that CRM doesnot try to send the transaction to ERP through middleware.
Go to SPRO ->CRM -> Transactions -> Basic Settings -> Status Management ->Change Status Profile for User status
Here, select your status profile and click on the intiial status, scroll down and go to 'to be distributed' and select the radio button 'Forbidden'
This will solve the problem.
Many Thanks
Ravindra

Inserting Pricing condition in Sales order when saving the sales order

Dear ABAPers,
My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
How to do this.
Thanks & Regards,
Ashok.

Dear ABAPers,
I have Solved this Problem.
Thanks & Regards,
Ashok.

How to see all image types when saving an image without selecting "all files"every time

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/951766]]</blockquote>
Hallo, and thank you for reading this.
I am a person who saves a lot of images online and renames them in different folders in different names like B - 34 or G - 56. I have been working with firefox 10 for quite some time and it had a pretty handy bug (I guess) where I could save an image and firefox would just save the image in it's original type (JPEG,PNG etc) while "save as type" was empty.
It also always has shown all the image types in the folder where I save the images (except for GIF) and that helpes me quite a lot by saving me the trouble of selecting "all files" every time I save or going to the folder to rename every image.
Now this seems to be lacking in the newest firefox versions and my question is if I can set firefox to always show me all the image file types when saving an image, instead of only showing JPEG's when I try to save a JPEG.
Thank you for your time.

I suspect this is a Windows problem. I am surmising the FilePicker uses the Operating System or Desktop facilities. Does Windows 7 offer any other file categories like ''images'' ?
I do not normally use Windows 7, but may the option depend upon the directory being an indexed one, I ask after finding this thread ''Bring File types tab back'' [http://www.windows7taskforce.com/view/819]
This question is a duplicate of [/questions/951764]
Normally I would lock the duplicate question, but in this instance I will leave it open as it is unanswered and someone may give a better reply.

Why do my images and layered files 'shrink' in pixel size when 'saving as/saving for web'?

I'm using CS3 and when I "Save As" or "Save For Web" to a format like .jpg for example, the resulting .jpg is reduced in size considerably.
For example I was touching up a photograph that was 1300 x 700. I saved out the file for web to my desktop and emailed it to a friend. When my friend opened it, it had shrunk down to about 75% of the original 1300 x 700 size. I have the same problem when saving out layered .psd's, which lead me to believe it had something to do with my save settings. I've scoured the net for answers as well as gone through each setting, but have not been able to solve this problem.
Thanks in advance for any assistance you can offer in solving this annoying problem!
Jason

Jeffrey, I checked the UI dialog and it's set to 'original'.
Marian, this problem occurs whether I email the file or not.
Thanks for the responses guys, but the problem continues. Any other thoughts? Remember this happens under both 'Save As' and 'Save for Web' actions.

Chinese characters copying incorrectly when saving pdfs with Preview

So this is a very strange problem. When I save a .pdf that I have annotated in Preview, it saves fine and everything continues to display correctly. However, if I then try to copy Chinese characters from the pdf, it pastes gibberish. F'rex:
灿烂辉煌 becomes "3456"
and
遇到的问题 becomes " !"
Does anyone know what is going on and how to deal with it?

The strange part is that initially the Chinese characters copy fine. It's only after I save the .pdf that copying goes all wonky.
I think there is a bug related to annotation.
Is there any way to control what encoding Preview uses when saving?
No. PDF is the worst possible format to use for any kind of editing.
Have you tried Adobe Reader? Or Skim?
http://skim-app.sourceforge.net/
Preview is not always the best option.

[SOLVED] Inkscape bug when saving

Similar Messages

Maybe you are looking for