[SOLvED]Installation restore after BIOS update. UEFI doesn't boot.

Hello.
In order to solve my trouble with firewire on my motherboard in was adviced -in the FW mailing list- to update the BIOS. As expected the boot entry created with efibootmgr was erased but thats fine and i knew it was going to happen.
The problem however is that neither archboot (USB) neither archiso (CD) nor ubuntu12.04 (USB) can boot into it so i can restore the uefi entries.
All hang with a blank screen. Ubuntu and Archboot booted fine in UEFI mode before the update.
I tried nomodeset, acpi=off and noapic but ended up with the same blank screen and no messages at all.
Last edited by 89c51 (2012-09-04 11:45:01)

I downgraded to the previous (83) and to the original (70) and it doesn't boot in any of those two in UEFI.
It worked fine with version 70 before the morning update.
dafuq
Last edited by 89c51 (2012-09-03 16:27:55)

Similar Messages

Satellite Pro A300 (PSAG9E) - After BIOS update Windows doesn't boot

Reboot went fine after BIOS upgrade and Windows XP logo appears loads for few seconds then beep and reboot - last known good or start Windows normally same effect.
Rebooting back to start again - this is a brand new laptop - using BIOS from Toshibas official download site.
Pretty annoyed as trying to figure out how to refresh or downgrade BIOS.
Have taken battery and RAM out to see if I can clear it?
Any ideas anyone?

Hi
Hmm this is very strange usually if something would went wrong during the BIOS update procedure then your notebook would not boot up.
It would be dead.
But in your case the notebook boots up but just the OS does not start properly
Maybe you should try to reinstall the OS again?
I see you are using the Win XP I think the Vista was preinstalled. Am I right?
Hmm. in my opinion you should try to boot from the Toshiba recovery disk and should try to reinstall the OS in order to check if this issue could be solved.

Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.

Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

Satellite M100 - After BIOS update it doesn't boot anymore

Hey everybody :)
BIOS problem: I was updating *BIOS* by WinFlash and my laptop "freezed" so BIOS is DAMAGED. Laptop does't boot up.
I was updating my XP laptop to *BIOS 3.00* version.
How to repare BIOS?

Hey mate,
I agree with Akuma and I think in this case you can do nothing. If the notebook froze during BIOS update I think the ROM module is now destroyed and must be reflashed or exchanged. In this case only an ASP can help you.
On the Toshiba website you can find a list of ASPs and you should contact the nearest one. Speak with the technicians and they will try to help you.
Good luck! :)

After BIOS update I can't boot in EUFI anymore

Hello everyone, I recently replaced my HDD for a SSD and installed Windows 8.1. Then I wanted to install the drivers because some features did not work. So I went to this:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad-z580 and started at the top. I installed the 64 bits BIOS update for Windows 7 and 8. I followed the instructions... At first I installed 5fcn95ww_public 64bit.exe. The laptop restarted and after that I was not able to boot my laptop anymore . I coulnd even boot from a USB to reinstall windwos (I thought this might help but this BIOS problem has noting to do with windows)
I am able to go in to the BIOS and change settings... I tried to reset the BIOS but it did not help. Then I changed the boot mode in "legancy support". Now it is able to boot from my SSD. But I want it to boot from in UEFI mode.
Please help me. I think I just destroyed my laptop. (I'm sorry for my bad English)

Hi mezian, and welcome to the Lenovo User Community!
That's not right . I suggest you return the laptop and exchange, or call support to get it repaired.
I don't work for Lenovo. I'm a crazy volunteer!

Pbms w T400 after bios update: long time to boot, TPM&internet connect pbms

Hello,
I have a T400 thinkpad, type 7417 that I bought in the US in Nov 2008 (it was downgraded from vista to xp). In November 2011 the computer was running slow so I decided to clean it up a bit and then do the maintenance recommended by the thinkvantage program. I proceeded to do all the smaller updates and the last one that was recommended was updating the BIOS (from what I understood). I left the computer doing these updates overnight, making sure it was plugged into a power source as specified by the update.
The next morning I found that my computer took 5-10minutes to start up and when it did, the screen resolution was altered as if it was in safe mode or something…I removed the HD and saved my data, then tried to use the Rescue and Recovery program to revert to factory settings. Although it seems that the factory settings were indeed restored I still have many problems with the computer. 1. it takes 5-10min to start (blank screen pre-windows logo) 2. it gives me 2 error messages once it has booted: 2a. "Tvttcsd application has encountered a pbm and needs to close." 2b. "There was a pbm connecting to the tpm (security devie) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled driver could also cause this problem. Please refer to the online documentation for more information." 3. it cannot connect to the internet (either wifi or ethernet) 4. Ad-aware tells me it detects a malicious program running but cannot seem to clear it. I have seen several threads about these problems but cannot figure out if they are all connected or not. Before touching anything I was hoping for some help on how to proceed - I am no expert but I can follow instructions I am currently running avast on the computer to hopefully get rid of whatever viruses there may be and see if that can solve the problem. All help is really really welcome please!!!! lore
Solved!
Go to Solution.

lore schrieb:
"There was a pbm connecting to the TPM (security device) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause the pbm. Refer to oline docs for more info."
When I try to look into the Windows firewall I get the following error message:
"Cannot start Windows firewall/internet connection sharing service."
Not sure if both of these are related or not. Any ideas? Would re-installing windows help?
Thanks so much for your help! lore
Did you "optimize" your computer with "Tuneup utilities"? This might cause problems like that.
Also check, whether the services "Windows Firewall" is set to start "Automatic" and running.
Third party desktop-firewall like Zonealarm, Kaspersky or Symantec Internet Security also can cause that problem. In that case remove it including all policies, test the connection and re-install it. Activate training-mode and disallow automatic blocking unknown outgoing connections.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

My Qosmio F10 is dead after Bios Update

My Qosmio F10 is dead after BIOS update ... it doesn't work anymore .. i update the bios from 1.10 to 1.20
the switch Led is always orange...
what can i do to make it work again ? or return the 1.10 version?

Hi
You can check many postings in this forum about the BIOS upgrade procedure.
Mostly the users damage the notebook because of wrong BIOS or wrong BIOS procedure.
If the notebook is dead after this procedure so it could be a damage motherboard.
In this case only the Toshiba service partner can solve this issue. ;(

Bios update UEFI for Pavilion dv6-6b13ss

hello guys,
Cant find the Bios update UEFI for my Pavilion dv6-6b13ss, tried everything possible still can't find, any solution please?
The other proplem i have that HP detect my computer model as Pavilion dv6-6b13ss but on the bottom of my device is written Pavilion dv6 6166ee so whats seems to be the proplem here?
PS : when update the bios with file HP presented for Pavilion dv6 6166ee i got the message that this bios update its not for this model.
thanks,

Hi @aliens1983
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are unsure of the exact model notebook you have as the auto detect states you have the Pavilion dv6-6b13ss but the sticker on the bottom states it is Pavilion dv6 6166ee .
It is most likely the former as that is what the tool detected after scanning your system for information.
Here is a link to How Do I Find My Model Number or Product Number? that may also help to clarify this for you.
Here is a link to the HP Pavilion dv6-6b13ss Entertainment Notebook PC Support And Drivers where it does list the latest recommended bios update as F.1C.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

ThinkVantage Toolbox does not run after BIOS update

Lenovo ThinkVantage System Update Tool on my T410 ThinkPad (2518EWG) offered me download and installation of ThinkPad BIOS Update Utility US version 1.28-1.11.
Since then, whenever I try to run Lenovo ThinkVantage Toolbox I receive a message: „This version of Lenovo ThinkVantage Toolbox is not licensed to run on this system“.
I notice that the ThinkVantage Toolbox still shows the old BIOS No. 6IET49WW (1.09), while the updated BIOS is 6IET68WW (1.28).
Any comprehensible instruction how to solve the problem for a computer layman will be much appreciated. Thanks - Jan

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

[SOLvED]Installation restore after BIOS update. UEFI doesn't boot.

Similar Messages

Maybe you are looking for