[SOLVED] Installing mod_jk through Aurbuild - Cannot find...

OLD TOPIC TITLE: Tomcat + mod_jk + Apache2 - need help!
Hi everyone,
I've been trying to install mod_jk but cannot get it compiled (compiling finishes fine but then there is no mod_jk.so file.. got me stumbled..). Annyway, I found a wiki for it on the ArchWiki (http://wiki.archlinux.org/index.php/Tomcat_and_Apache), but the download link is dead, and since the only thing I really need is the compiled "mod_jk.so", that's a pretty big problem. Could someone provide me with 'jk2-2.0.2.tar.bz2'? I can get the other file ('tomcat-4.1.27-1.tar.gz') from the net easily, but googling for the jk2 file doesn't show any results other than the ArchWiki page refering to it..
I really need this for my school project so any help would be greatly appreciated!
Thanks in advance,
Target

Hi mpie,
I greatly appreciate it that you take the time and effort to help me out here! I looked at the commands you where doing in the pkgbuild and tried some allready, I downloaded the source, extracted it and ran the commands as specified in the pkgbuild, the output:
(only errors)
appending configuration tag "F77" to libtool
checking for test... /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin
checking for rm... /bin/rm
checking for grep... /bin/grep
checking for echo... /bin/echo
checking for sed... /bin/sed
checking for cp... /bin/cp
checking for mkdir... /bin/mkdir
checking for uint32_t... yes
checking size of uint32_t... 4
checking for u_int32_t... yes
checking size of u_int32_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking for unsigned int... yes
checking size of unsigned int... 4
checking for unsigned long long... yes
checking size of unsigned long long... 8
checking for unsigned longlong... no
checking size of unsigned longlong... 0
checking for snprintf... yes
checking for vsnprintf... yes
checking for flock... yes
checking for setsockopt in -lsocket... no
checking whether to use SO_RCVTIMEO with setsockopt()... yes
checking whether to use SO_SNDTIMEO with setsockopt()... yes
./configure: line 22428: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
checking for target platform... unix
no apache given
./configure: line 22749: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
./configure: line 22752: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
./configure: line 22759: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
./configure: line 22954: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
./configure: line 22966: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
./configure: line 22975: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
configure: creating ./config.status
config.status: creating Makefile
config.status: creating apache-1.3/Makefile
config.status: creating apache-1.3/Makefile.apxs
config.status: creating apache-2.0/Makefile
config.status: creating apache-2.0/Makefile.apxs
config.status: creating common/Makefile
config.status: creating common/list.mk
config.status: creating jni/Makefile
config.status: creating common/portable.h
config.status: executing depfiles commands
I dont think the pkgbuild can fix those errors, what do you think? I looked through the configure script at the lines that the error messages state, but I don't see anything obviously wrong there. I've also met all the requirements for installing mod_jk as far as I know. echo $? after running ./configure shows a '0' too, so I'm not too sure if those errors are that serious.. After running a 'make' though (it does work for pretty long..) it doesn't show any errors, but there is no mod_jk.so in apache-2.0 directory. Also, after running make the exit code is still 0, so I don't think it has an error anywhere.
Any hints on what might cause these errors would be greatly appreciated!
I've attached the full output of the configure command and the make command:
http://tempz0ne.homelinux.com/configure-output.txt
http://tempz0ne.homelinux.com/make-output.txt

Similar Messages

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

My MBP has Mountain Lion installed. The iPhoto version is 8.1.2. Cannot install iPhoto 9.4 without installing 9.0, but cannot find 9.0. Solution, please.

My MBP has Mountain Lion installed. The iPhoto version is 8.1.2. Cannot install iPhoto 9.4 without installing 9.0, but cannot find 9.0. Solution, please.

If you're running Mac OS X 10.8.x ou can purchase iPhoto version 9.x from the App Store. If you purchase iPhoto at the App Store you will automatically get the most up-to-date version and you won't need to install the 9.4 update.
-Doug

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

Just installed 10g: Main form cannot find subforms or menus

I just added 10g FOrms Builder to my PC. I was running 9i and it still exists on the machine.
Problem: My main form, when run locally from Forms Builder cannot find any of its menus or subforms unless the FULL PATHs are defined in the properties or CALL_FORMs.
This was not a problem when running from 9i FOrms Builder.
I am assuming its a parameter somewhere in the FORMSWEB.CFG file which sets the default path to whatever path the main form uses.
Can anyone steer me in the right direction?
THANKS!

Hi,
Well, I assume that if 9i was installed, you also had FORMS90_PATH set in the registry.
Perhaps what is happening is Forms is running your main form, and then when you are calling other forms, it is using the 9i versions, and then failing because they are not 10g versions.
For example:
d:\app\9i\form1.fmx
d:\app\10g\form1.fmx
When trying to call form1.fmx, Forms follows the FORMS90_PATH first and uses the form in d:\app\9i\. Change your FORMS90_PATH and see what happens.
This is just a theory, I am new to 9i and 10g myself.
Cheers

Error when trying to install the iSCSI target - Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'

Hi,
I'm just attempting to setup an iSCSI target on a freshly installed Windows 2012r2 box, but I get the following error when attempting to Create and iSCSI virtual disk via the wizard after a successful
installation of the iSCSI target role.
The full error is:
Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1' in directory 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-GB\', or in any parent culture.
I tried to uninstall, then reinstall the role but no go.
The Server Locale and UI was all updated to en-GB but this folder does not appear to exist in this location. Rather, the folder I can see is:
'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-US\'
I'm going to attempt to copy the 'en-US' folder to 'en-GB' to see what happens, but I would like to know why this has occurred in the first place? Other roles have installed (such as AD DS AD CS and
IIS) on other machines with no issue.
Many thanks
Chris
Chris

Hi Chris,
The error "Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'" occured, because the file 'ImportExportIscsiTargetConfiguration.psd1' can't be loaded under the folder en-GB with current culture.
I recommend you can copy this .psd1 file under 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget'. Essentially if PowerShell can’t find the specified data file for the current culture it will “fallback” to the top-level data
file in this case.
For more detailed information, please refer to this article:
Windows PowerShell 2.0 String Localization
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Purchased photoshop elements 12 and premiere elements 12. downloaded and installed photoshop elements12 but cannot find how to download and install premiere elements 12

After I purchased pselements 12 and premiere elements 12 I downloaded and installed pselements 12 but I cannot find how to download and install premiere elements 12 because that window has disappeared and I can't get back to it. How do I download and install premiere elements 12? where is it? how can I find it?

rachif
I am assuming that the purchase and download is from Adobe. You should find the information that you seek under My Orders at http://www.adobe.com after you sign in (as per John's link).
However, if you have difficulties in going that route, please contact Adobe via Adobe Chat to discuss your order under the topic of Orders, Refunds, and Exchanges. To do that, click on the following link, and, when it opens, make sure that the topic is set at "Orders, Refunds, and Exchanges", click on the statement "Still need help? Contact us." to bring up the Adobe Chat.
Contact Customer Care
Please let us know the outcome.
Thank you.
ATR

I have installed Copy HTML but cannot find it as an option under any Menu. Only copy is there.

I have installed the Copy HTML plug-in but cannot find it as an option under any Menu. The only option is "copy". Where do I find this option so I can use it?

Your screenshot shows that you have the page source visible, so you already have the source code including HTML code available to copy.<br />
You should see the Copy HTML entry if you right-click a normally rendered HTML page.

Cannot install Office 2013 - Seup cannot find or validate an installation file

I downloaded the trial version of Office 2013 to evaluate it, but was unable to install it because I kept getting the following error...
Setup cannot find or validate an installation file. Please try reinstalling office from your installation source or if you installed from a downloaded package, please re-download and reinstall. If you continue to haVe problems
contact Microsoft or your system administrator.
I tried re-downloading the program - again I was met with the same problem. I tried running the setup file as administrator - problem remained. I tried copying the program to the hard drive and running it from there as the administrator - problem
remained. I downloaded Microsoft fixit tool for problem installations and ran that - that was no use either. The error message just kept coming back again.
I am assuming the setup file is corrupted in some way but seem unable to get an alternative setup file that will actually INSTALL. Or is there something so blatantly obvious going on that I'm missing it?
Help please!

I deployed Office 2k13 to client machine via SCCM 2012 R2. It did that flawlessly but I got the same error after trying to uninstall Office 2k13.
setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Uninstall.xml file:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
I can uninstall Office 2k13 manually by running setup.exe and following wizard but it is not automatic process so it sucks.
I've responded in your other thread:
https://social.technet.microsoft.com/Forums/en-US/fd735611-95bf-46f6-8add-2229a52e3e93/i-can-not-uninstall-office-2013-from-command-line?forum=officeitpro
Hi, your command-line is not valid - you are using a "relative" path for the <config.xml> and that is not supported..
http://technet.microsoft.com/en-us/library/cc178956(v=office.15).aspx#BKMK_config
Note: You must use a fully qualified path. Setup does not recognize relative paths with /config.
Instead, I suggest that you copy your "Uninstall.xml" file to the same folder where setup.exe exists, then, adjust your command-line like this:
setup /uninstall ProPlus /config Uninstall.xml
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[Solved] Kernel 2.6.31 cannot find "modules.dep"

After upgrading to default x86_64 kernel 2.6.31-ARCH with no error messages, I get this during reboot:
"Could not load /lib/modules/2.6.30-ARCH/modules.dep"
Well, no wonder, as there is no 2.6.30-ARCH directory, only 2.6.31-ARCH. I have tried "mkinitcpio -p kernel26", but it didn't help any (naturally).
Is there an easy fix for this?
Last edited by whaler (2009-10-18 22:15:46)

Dieter@be wrote:Yes, if you have a separate filesystem for /boot, you should leave it uncommented in fstab and mounted when you install a new kernel (watch out with the 'noauto' mount option). during package installation it will show a warning if you have /boot not mounted but I guess we both overlooked it.
It is not so surprising if I overlooked it... However, I cannot recall seeing such a warning? I am in the habit of copying both pacman's package install msgs and boot console msgs, but I don't think I have ever seen a warning about the /boot partition not being mounted.
Dieter@be wrote:It is remarkable however, I don't remember ever having an issue like this, do you? It looks to me like something changed, I looked at the sources for kernel26 but couldn't find anything special.
During the 18 months I have used Arch I have received a faulty kernel twice. On both occasions the problem was another than this /boot partition issue. I have never had the /boot partition uncommented in fstab while using Arch, so something must have changed, or there is a new bug in the kernel code somewhere. It is significant that this only appears with the 2.6.31 kernel.
I have EXT3 on my boot partition, and I use this ending in fstab "defaults 0 1". Is it safe?
BTW - with "vga=773 nomodeset" in GRUB, graphics, incl. MPlayer etc., seem to be back to normal - in fact better than before, as I am now getting full repaints in OOo Calc! Of course, since I am not into gaming, I don't know if there is some other functionality missing...
Thanks again, Dieter - I will mark this thread solved!

N9A2 Platinum, Installing XP Pro, SP2, Cannot find SATA Hard Drives

I am lost here. I cannot get the bios to recognize the HDs as SATA drives, and XP Pro does not find the HDs (of course), and I do not know why. Do I need a SATA driver floppy for the Install Win drivers <f6> ? I thought not from the other threads here. I am not using Raid.
I have downloaded and read the manual from the support site, Support knowledgebase and every thread that I could find here in this forum.
My setup is the N9A2 Platinum, V1.
Bios v 1.4, 3/112/08
Phenom X3 720
Ultra 750W power Supply
Seagate 500GB SATA HD
WD 80GB SATA HD (for Photoshop scratch drive)
My Bios is set up as follows>
Integrated Peripherals
Extra RAID Controller - Disabled
On-Chip ATA Devices
PCI IDE Busmaster - Enabled
RAID mode - IDE
OK, Any ideas? You folk have a lot more experience with me. Thanks for all/any help.

Ports 5 and 6 ,the red ones ,are for the Promise Extra RAID controller ,which as per BIOS settings was turned off ,thats why the HDD was not detected .You can use that Promise controller with HDD-s ,even if they are not in RAID config ,but drivers are required.
Glad i could help you!

Successful download, cannot install, have no installer, cannot find one

First, I have my serial number. Second, I cannot get my Creative Suite installed. I cannot get help from Adobe directly, they send me to this forum. I apologize in advance as I am pretty sure this is not the right place to ask the question. My house burned down in a Rocky Mountain wildfire, and my brand new Creative Suite disk with it. I have finally gotten Adobe to assist in getting the download but I cannot launch it. I have not found any installer. When I trace back through the system logs the download does not show up in the Akami downloader although I have two complete error-less downloads now. Can anyone help?

what product are you trying to install?
what's your os?
what file(s) (names and extensions) did you download and what file size(s) are shown on your hd?

[SOLVED] After pacman glibc update, cannot find command bash?

A few days ago I ran into a problem after running pacman -Syu that ended up with an unbootable system. I found this topic that ultimately solved the kernel panic-
https://bbs.archlinux.org/viewtopic.php … 1#p1127251
All that was needed was a symlink "/lib" to point to "/usr/lib"
My system now almost boots but luckily I can now get a to a shell (zsh). The problem is that I can not run bash, and various other tools- including my desktop environment and pacman.
I have checked my $path, and have verified that I have the binary file "/usr/bin/bash" and a symlink in /bin/bash to point to that binary file, which does exist...
% ls -l /bin/bash
lrwxrwxrwx 1 root root 13 May 24 23:43 /bin/bash -> /usr/bin/bash
% ls -l /usr/bin/bash
-rwxr-xr-x 1 root root 738008 Mar 13 00:47 /usr/bin/bash
But when I try to start a bash shell or run a script
% bash
zsh: command not found: bash
% pacman
zsh: command not found: pacman
% /usr/bin/bash
zsh: no such file or directory /usr/bin/bash
% cat test.sh
#!/bin/bash
echo "Hello World"
% ./test.sh
zsh: ./test.sh: bad interpreter: /bin/bash: no such file or directory
I hope i was thorough enough in providing information about my system, but please let me know if there's anything else I left out that may be able to help.
Thanks so much!
[SOLVED]- Ended up mounting my system from a live install cd, and copying over each bash binary in my system with the live media's binary.
Last edited by OrangeCrush (2013-05-25 06:38:43)

If it has only been a few months, that thread should have nothing to do with what you are experiencing. That problem stemmed from when the filesystem was actually changed from having /lib as an actual directory to /lib as a symlink to /usr/lib. Oh the problems that caused. For me it went perfectly smooth... well I did have to search for and rid /lib of extraneous unowned files, but it was smooth after that.
You say though that you did not have a /lib symlink when you checked, and then you created it? This is odd, as that is part of the filesystem package and therefore a tracked file. Maybe you should start by reinstalling the filesystem package just to make sure that the necessary components of the filesystem are all in order before proceeeding.
BTW, you should really update more often than every "few months" as that is what using a rolling release is all about. Also if you don't update very often still, never update the database (-Sy) without also updating the system (-Syu) as this will lead to partial upgrades, which can severly break your system. So never do "pacman -Sy <package>" as that is the equivalent of doing just a "pacman -Sy" and then continuing on your merry way. Big changes are in the air right now around these parts, so keeping your system up to date is probably going to be crucial in making subsequent updates as pain free as possible (we are heading towards the final /bin -> /usr/bin move!).

I have a new Mac. I installed my Bridge CS4 that I ran on my old mac. When I import RAW photos from my Nikon d90 they come in with an .NEF extension. I need to install a converter but cannot find one.

I have a new mac. I installed my Bridge CS4 and Photoshop CS4 that I ran on my old mac. When I import RAW pics from my Nikon D90 they come in with the extension of .NEF. Apparently this is not a readable form for Bridge as the picture does not appear. I believe I need a converter to convert .NEF to .dng but I can't find one. Any ideas?

You do not need to convert to DNG.
The NEFs from your camera model have been supported since ACR 4.6 and 5.1.
What you need to do is update your ACR plug-in to version 5.7, the latest and last version for CS4. Right now, you are probably on ACR 5.0, the version supplied with the original release of Photoshop CS4.
Be aware that the Adobe updater is extremely unreliable when it comes to CS5, so that you must do the update manually. There are detailed instructions on the ACR 5.7 plug-in download page. You MUST follow those instructions to the letter.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 5.7 update

[SOLVED] Installing mod_jk through Aurbuild - Cannot find...

Similar Messages

Maybe you are looking for