[SOLVED] Intel Centrino 2230 Not Connecting - Lenovo Ideapad Y510p

I have a Lenovo Thinkpad Y510p, and I have everything working, except wifi. I tried using both NetworkManager and WICD, and both of them do the same thing. It attempts to authenticate, then it tries to assign an IP, then it just stops. It doesn't do anything else. I've reloaded the module (iwldvm and iwlwifi) multiple times, and have tried disabling the 11n band. I have no idea why it's not working. Any help is greatly appreciated! Sorry for the lack of info, I'm not sure how else to describe it, or what logs to include!
Last edited by kkeller (2014-05-17 16:39:10)

WonderWoofy wrote:
Logs are centralized in the journal these days.
But it sounds as though you simply have conflicting network management services trying to run at the same time. I imagine that it is probably either dhcpcd.service or [email protected] (or whatever your ethernet interface gets named).
Wow, now I feel stupid. That was it. I forgot I enabled dhcpcd.service a few days ago. I just disabled it and it works perfectly. Thank you so much!

Similar Messages

[SOLVED] Cannot start X server on Lenovo IdeaPad Y510p

Hi there,
I recently bought new laptop (name in the subject). After installing Arch, i was unable to boot using nouveau drivers, unless I set the 'nomodeset' kernel parameter. After decrypting my disk, the screen froze.
With proprietary nvidia package, I'm able to boot & login, but when I try to start X server, the display turns black, my graphics' card fan starts pumping the air and then the entire system reboots.
I browsed and tried troubleshooting from the wiki regarding Nvidia, Optimus, etc., but none of them worked.
Any idea what should I do next?
Last edited by khardix (2014-04-28 15:54:00)

Ok, I managed to run the X server using the provided steps, albeit with few tweaks - I force installed the nvidia-libgl package, because the nvidia driver was not happy with the xorg glx module. Then I had to engage in some pacman-magic, because the bumblebee for some reason conflicts with nvidia-libgl (I wasn't able to figure out why). So I --dbonly removed nvidia-libgl and --dbonly installed mesa-libgl, so the system knows it has a libgl implementation.
With all this, after I ran 'nvidia-xsettings --sli=off', I was able to startx the DE with both GPUs still attached.
When the time permits, I will tinker with it more and try to get the SLI working - according to NVIDIA README it may have to do something with acpi. Any further input much appreciated

Z87I - Windows 8 and Intel Centrino 2230 Bluetooth problem

Hi MSI!
This is my first message on the forum, and unfortunately it is about the problem i face (please forgive me if choose a wrong place to start this topic).
I have just bought and installed the new Z87I (itx) board in my HTPC, and it seams that i cannot activate a Bluetooth on the integrated Intel Centrino 2230 card.
I have installed Windows 8 Pro, as my OS of choice, and all the drivers from the disks i have received with the board.
WiFi is working great, but I don't know how to access the Bluetooth settings so that I can connect my Bluetooth keyboard and phone.
I have searched all over the internet for a possible solution, installed the new drivers from Intel website (15.8.0.0 and 3.0.1304) but I cannot find anything related with Bluetooth in windows settings (control panel, intel proset/wireless tools or in device manager). There are settings for WiFi, but nothing for Bluetooth.
While I was looking in Device Manager, in Network adapters, I saw that Intel Centrino 2230 is recognised, and working proprly (even the Bluetooth AMP is set as Enable).
Has anybody had similar issues with this card and Bluetooth settings??

Quote from: DuckyLee on 12-August-13, 17:29:43
Hi MSI!
This is my first message on the forum, and unfortunately it is about the problem i face (please forgive me if choose a wrong place to start this topic).
I have just bought and installed the new Z87I (itx) board in my HTPC, and it seams that i cannot activate a Bluetooth on the integrated Intel Centrino 2230 card.
I have installed Windows 8 Pro, as my OS of choice, and all the drivers from the disks i have received with the board.
WiFi is working great, but I don't know how to access the Bluetooth settings so that I can connect my Bluetooth keyboard and phone.
I have searched all over the internet for a possible solution, installed the new drivers from Intel website (15.8.0.0 and 3.0.1304) but I cannot find anything related with Bluetooth in windows settings (control panel, intel proset/wireless tools or in device manager). There are settings for WiFi, but nothing for Bluetooth.
While I was looking in Device Manager, in Network adapters, I saw that Intel Centrino 2230 is recognised, and working properly (even the Bluetooth AMP is set as Enable).
Has anybody had similar issues with this card and Bluetooth settings??
Have you had any resolution to this yet?

Problems with Lenovo Ideapad y510p

Hi, I got my new Lenovo Ideapad y510p for a month ago, and three weeks after it started acting wierd by having a slow startup and sometimes it just had black screen when it was starting up. Sometimes I have to hold down the power and try several times to turn on the computer. When it do start up, at the begining (after the lenovo logo) it makes some black screen switching (not sure if it correct way to describe it), and then it take ages for it to get on the login screen, and get on desktop, its like it doesn't have an SDD. Any help?
Solved!
Go to Solution.

Hi Zenadbeg,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your Y510p laptop is not working as expected and takes long time to boot into Windows, below are the steps to check and resolve the issue in the computer:
Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee Power then resetting BIOS to its defaults should resolve the issue
To access the BIOS menu click the NOVO button which at the left-hand side of the computer next to AC power adapter jack.
Then to reset the BIOS to its defaults click on “F9” Key and select YES.
Now Click on “F10” Key to safe the changes that are done in BIOS, restart the computer and check if the issue is resolved.
Hope this helps!!!
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Solved: message "You are not connected to the Internet" after idle sleep

Summary: What worked for me was to turn off IPv4 and IPv6 on my unused interface.
The problem was that after my computer had been in sleep mode, Safari would say:
"You are not connected to the Internet."
or "softwareupdate -l" would say:
"This computer’s Internet connection appears to be offline."
Yet Firefox worked OK and traceroute also showed the connection was fine.
Digging deeper (though only later, after I found the command), "scutil -r" indicated a problem with DNS lookup:
$ scutil -r developer.apple.com
Not Reachable
$ scutil -r 17.254.2.129
Reachable
I'm using 10.6.6 on a Mini (model Macmini1,1), which has a wired ethernet connection on en0 and an AirPort on en1. I use the wired connection, but I also configured the AirPort just because, and then turned it off in the network preferences. I use a static (manually-configured) IPv4 address on en0 and DHCP on en1 (when it's up, which is only for experimenting). I don't use IPv6 as such, though I've left it enabled.
I was initially confused, thinking the problem was intermittent, though it's not. I tended to assume that because the display had gone into standby the computer must be sleeping, without checking that the power light was dimming and brightening, indicating sleep mode. Later I found the "pmset -g" command to display the power management settings. Among the settings is:
ttyskeepawake 1
This means that if I had a shell session open in Terminal, which I did quite often when investigating the problem, the computer put itself into idle sleep later than if I didn't have the session open. The times in Energy Saver settings in System Preferences seem not to be very accurate anyway. For instance, with the default computer sleep and display sleep settings of 10 minutes and a shell session open, I've seen it take 17m25s for the display to blank and a further 14m16s for the computer to sleep, for a total of 31m41s.
The problem only occurs after an idle wait. It doesn't occur after a software sleep (entered from the Sleep entry in the Apple menu or using the keyboard shortcut) or after pressing the power button momentarily.
One way I found to fix the problem was to turn the AirPort on and then off again through Network Preferences (or the menu bar item). Later I found that disconnecting and reconnecting the ethernet cable also fixed the problem. I hoped to find a better way.
What led me to this halfway house solution was noticing that if I turned the AirPort on and then off again, entries for en1 still remained in the routing table. These entries were for IPv6 link-local and multicast networks, as in this edited output from "netstat -nr":
Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::%lo0/64 fe80::1%lo0 Uc lo0
fe80::1%lo0 link#1 UHL lo0
fe80::%en0/64 link#4 UC en0
fe80::216:cbff:fexx:xxxx%en0 0:16:cb:xx:xx:xx UHL lo0
fe80::%en1/64 link#6 UC en1
ff01::/32 ::1 Um lo0
ff02::/32 ::1 UmC lo0
ff02::/32 link#4 UmC en0
ff02::/32 link#6 UmC en1
Even with the AirPort switched off, ifconfig showed it as being up:
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:17:f2:xx:xx:xx
media: autoselect (<unknown type>)
status: inactive
I don't know if these observations are relevant, but anyway they led me to the solution (well, workaround). The way I finally fixed the problem was as follows.
1. Create a new location in Network Preferences. (This isn't strictly necessary, but it allowed me to keep the AirPort configuration (including my wireless password) intact in the default Automatic location.)
* Click on the Location pull-down
* Click Edit Locations...
* Click +
* Enter new location name (I called mine Wired-static)
2. Configure the Ethernet interface with its static address. (If using DHCP, I'd have skipped this step as DHCP is the default.)
3. Go to the AirPort configuration (even though it's shown as Off).
* Click on Advanced
* Click on TCP/IP
* Select Off for both IPv4 and IPv6
4. After clicking Apply in Network Preferences, a new "Location" item appears in the Apple menu between "Dock" and "Recent Items". Select the new location. This setting sticks across boots.
I hope this helps anyone else in a similar situation. Maybe if you use wireless it would help to turn off IPv4 and IPv6 on the Ethernet interface?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DId the iPod ever successfully connect to the network?
- Does the iPod successfully connect to other networks?
- Do other devices successfully connect with your network?

W500 with Intel 3500 wireless not connecting to N network

I have a W500 4058-CTO under windows 7. Wireless N support working well at 145Mb/s on average. It was being somewhat flaky when I docked/undocked about turning off the wireless radio. I updated to the latest drivers from Lenovo, big mistake. It installed the following on an update:
Access Connections: v5.61
Intel wireless driver: v13.01.1000
Rebooted and now the wireless refuses to connect to the N network (using a Netgear WNR3500L). If I change the netgear down to WPA-PSK with TKIP, then it connects in G mode. Setting the netgear to WPA-PSK[TKIP} + WPA2-PSK [AES} and setting the W500 wireless to WPA2-PSK [AES] fails to connect and provides me this fine error:
Dynamic key exchange did not succeed within configured time
My original configuration on the W500 before the update was WPA2-PSK [AES]. I removed/re-installed the Intel & Access Connections drivers/software. Same situation. Note that if I set my router to G and the W500 to WPA-PSK with TKIP it connects at 54mb fine. 'Course, that isn't making full use of my network.
Anyone have an idea on how to resolve this?

Try this:
In Windows:
Go into your power options (Control Panel - Power Options)
There are 3 options: Balanced, Power Saver and (may be hidden) High Performance.
Either choose High Performance (there's no Save or Ok; it changes immediately) and try connecting again
or
choose either of the other plans and click "Change plan settings" and the "Change advance power settings". Scroll down, if necessary, to "Wireless Adapter Settings" and click on the + to view the "Power Saving Mode". Click the + again to reveal the options for "On battery" and "Plugged in". For both, choose 'Maximum Performance'. Any of the other three options ('Low', 'Medium' and 'Maximum Power Savings') may cause this issue.
Let me know if that helps.

(Solved) [Intel HDA] Headphones not detected

Hi there,
I'm having an annoying issue since I've installed (and re-installed) Arch on my netbook.
Everything's alright (except Gnash, but I'll google that later), the internal speakers work perfectly but when I put my headphones or my speakers (ext.) the internal speakers are "muted-off" (so the jack is detected, right?) but nothing's coming out from my headphones/speakers.
Here's my aplay -l out :
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: Conexant Digital [Conexant Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
And here is my amixer output:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 65536 [100%] [on]
Front Right: Playback 65536 [100%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 27636 [42%] [off]
Front Right: Capture 27636 [42%] [off]
and a lspci | grep Audio output:
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
My headphones are plugged-in since I booted.
Another problem is that when I'm launching alsamixer there's only the master (Card: PulseAudio - Chip: PulseAudio). So, I make F6 > "1 HDA Intel" and I have other channels :
Master (100 & unmuted) - PCM (100 & unmunted) - Mic (0 & muted) - S/PDIF (muted) - S/PDIF Default PCM (unmuted) - Beep (86 & muted) - Internal Mic (0 & muted) -- (Card: HDA Intel - Chip: Conexant CX20549 (Venice))
This is strange because on my former installation of Arch (on the same PC) the "default" alsamixer had exactly the same channels and the "Master only" didn't 'exists'. (But I had the same problems).
I tried a bunch of solutions I found but none worked.
alsa-utils alsa-plugins & alsa-oss are installed (base-devel too if it can help).
I'm using SLiM & Cinnamon and had the same issue with LXDM & LXDE (same computer).
So if somebody could gave me a little bit of his light it'll be much appreciated!
Thank you, Flaco
*Edit: Since I've rebooted with the headphones plugged-in the internal speakers don't work neither... but it may be something else; I tried a lot of solutions so maybe there's conflict between some files and/or process...
**Edit: Internal speakers issue solved. I might have touched some stuffs on pavucontrol before... anyway, the headphones are still a problem...
***Edit: I've booted (on a live usb) on Lubuntu to see what's happening and... still no sound. The jack input might be broken; I'll open my computer to see what's happening and to repair (or not) it.
Last edited by Flaco (2013-07-04 00:19:57)

bump :x

[SOLVED] Intel DRI does not work after update

Hi,
after update of kernel from 3.5.6 to 3.6.5 and intel driver and deletion of dri2proto and mesa via pacman -Qdt (there are no more dependencies).. acceleration is no longer working
$ export LIBGL_DEBUG=verbose; glxinfo | grep renderer
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: Can't open configuration file /etc/drirc: No such file or directory.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
Configuration:
SandyBridge I5, Intel HD 3000
Can somebody help?
Last edited by microcz (2012-11-07 06:15:23)

OT: A simpler way to check if some packages are installed:
$ pacman -Q intel-dri libgl foobar
intel-dri 9.0-1
libgl 9.0-1
error: package 'foobar' was not found
What's the output of 'groups'? Maybe you need to add yourself to 'video' group?
http://www.linuxquestions.org/questions … nf-794105/
http://www.mail-archive.com/dri-devel@l … 41313.html

[SOLVED] XBMC thetvdb plugin not connecting

Hey everyone,
Since about a week ago, my xbmc install won't add new content to my library. Files play fine in file browser mode - all naming conventions etc are the same as I have been using for years. The imdb plugin still picks up new movies I add.
Since I have been having problems there have been new xbmc and thtvdb updates, but the issue arose after a normal pacman update with a kernel update I think.
My log gives a lot of:
18:41:12 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:41:12 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:41:12 T:140158713915136 ERROR: Run: Unable to parse web site
The curl error implies that it cannot connect to thetvdb, but I can ping it fine, and all other internet connection on the machine work perfectly.
Here is my full xbmc log:
[root@htpc .xbmc]# cat temp/xbmc.log
18:37:32 T:140159133337536 NOTICE: -----------------------------------------------------------------------
18:37:32 T:140159133337536 NOTICE: Starting XBMC (11.0 Git:Unknown), Platform: Linux (Arch Linux, 3.5.6-1-ARCH x86_64). Built on Oct 8 2012
18:37:32 T:140159133337536 NOTICE: special://xbmc/ is mapped to: /usr/share/xbmc
18:37:32 T:140159133337536 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/xbmc
18:37:32 T:140159133337536 NOTICE: special://masterprofile/ is mapped to: /home/paul/.xbmc/userdata
18:37:32 T:140159133337536 NOTICE: special://home/ is mapped to: /home/paul/.xbmc
18:37:32 T:140159133337536 NOTICE: special://temp/ is mapped to: /home/paul/.xbmc/temp
18:37:32 T:140159133337536 NOTICE: The executable running is: /usr/lib/xbmc/xbmc.bin
18:37:32 T:140159133337536 NOTICE: Local hostname: htpc
18:37:32 T:140159133337536 NOTICE: Log File is located: /home/paul/.xbmc/temp/xbmc.log
18:37:32 T:140159133337536 NOTICE: -----------------------------------------------------------------------
18:37:32 T:140159133337536 NOTICE: Setup SDL
18:37:33 T:140159133337536 NOTICE: load settings...
18:37:33 T:140159133337536 NOTICE: special://profile/ is mapped to: special://masterprofile/
18:37:33 T:140159133337536 NOTICE: loading special://masterprofile/guisettings.xml
18:37:33 T:140159133337536 NOTICE: Getting hardware information now...
18:37:33 T:140159133337536 NOTICE: Checking resolution 13
18:37:33 T:140159133337536 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
18:37:33 T:140159133337536 NOTICE: Loaded playercorefactory configuration
18:37:33 T:140159133337536 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
18:37:33 T:140159133337536 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
18:37:33 T:140159133337536 NOTICE: No settings file to load (special://xbmc/system/advancedsettings.xml)
18:37:33 T:140159133337536 NOTICE: Loaded settings file from special://profile/advancedsettings.xml
18:37:33 T:140159133337536 NOTICE: Contents of special://profile/advancedsettings.xml are...
<advancedsettings>
<video>
<excludefromscan>
<regexp>@eaDir</regexp>
<regexp>@EADIR</regexp>
</excludefromscan>
<excludefromlisting>
<regexp>@eaDir</regexp>
<regexp>@EADIR</regexp>
</excludefromlisting>
</video>
<audio>
<excludefromscan>
<regexp>@eaDir</regexp>
<regexp>@EADIR</regexp>
</excludefromscan>
<excludefromlisting>
<regexp>@eaDir</regexp>
<regexp>@EADIR</regexp>
</excludefromlisting>
</audio>
<remotedelay>2</remotedelay>
</advancedsettings>
18:37:33 T:140159133337536 NOTICE: Getting hardware information now...
18:37:33 T:140159133337536 NOTICE: Checking resolution 13
18:37:33 T:140159133337536 NOTICE: Default DVD Player: dvdplayer
18:37:33 T:140159133337536 NOTICE: Default Video Player: dvdplayer
18:37:33 T:140159133337536 NOTICE: Default Audio Player: paplayer
18:37:33 T:140159133337536 NOTICE: Disabled debug logging due to GUI setting. Level 0.
18:37:33 T:140159133337536 NOTICE: Log level changed to 0
18:37:33 T:140159133337536 NOTICE: Loading media sources from special://masterprofile/sources.xml
18:37:35 T:140159133337536 NOTICE: Using visual 0x6a
18:37:35 T:140159133337536 ERROR: GLX: Same window as before, refreshing context
18:37:35 T:140159133337536 NOTICE: GL_VENDOR = NVIDIA Corporation
18:37:35 T:140159133337536 NOTICE: GL_RENDERER = ION/integrated/SSE2
18:37:35 T:140159133337536 NOTICE: GL_VERSION = 3.3.0 NVIDIA 304.51
18:37:35 T:140159133337536 NOTICE: GL_SHADING_LANGUAGE_VERSION = 3.30 NVIDIA via Cg compiler
18:37:35 T:140159133337536 NOTICE: GL_GPU_MEMORY_INFO_TOTAL_AVAILABLE_MEMORY_NVX = 524288
18:37:35 T:140159133337536 NOTICE: GL_GPU_MEMORY_INFO_DEDICATED_VIDMEM_NVX = 131072
18:37:35 T:140159133337536 NOTICE: GL_EXTENSIONS = GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_ES2_compatibility GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_robustness GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_storage GL_ARB_texture_swizzle GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback_instanced GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_texture_type_2_10_10_10_REV GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_x11_sync_object GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_alpha_test GL_NV_blend_minmax GL_NV_blend_square GL_NV_complex_primitives GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_ES1_1_compatibility GL_NV_explicit_multisample GL_NV_fbo_color_attachments GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragdepth GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_buffer_load GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_lod_clamp GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_vdpau_interop GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_OES_compressed_paletted_texture GL_OES_depth24 GL_OES_depth32 GL_OES_depth_texture GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_get_program_binary GL_OES_mapbuffer GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_rgb8_rgba8 GL_OES_read_format GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_float_linear GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_array_object GL_OES_vertex_half_float GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
18:37:35 T:140159133337536 ERROR: GLX: Same window as before, refreshing context
18:37:36 T:140159133337536 NOTICE: UDisks: Added /home
18:37:36 T:140159133337536 NOTICE: start dvd mediatype detection
18:37:36 T:140159133337536 NOTICE: initializing playlistplayer
18:37:36 T:140159133337536 NOTICE: DONE initializing playlistplayer
18:37:36 T:140159133337536 WARNING: file doesnt have <fontset> with name 'Default_No_Uppercase', defaulting to first fontset
18:37:38 T:140159133337536 NOTICE: UpdateLibraries - Starting video library startup scan
18:37:38 T:140159133337536 NOTICE: initialize done
18:37:38 T:140159133337536 NOTICE: Running the application...
18:37:38 T:140158713915136 NOTICE: VideoInfoScanner: Starting scan ..
18:37:38 T:140158730700544 NOTICE: -->Python Interpreter Initialized<--
18:37:38 T:140159133337536 NOTICE: Webserver: Starting...
18:37:38 T:140159133337536 NOTICE: WebServer: Started the webserver
18:37:38 T:140159133337536 NOTICE: ES: Starting event server
18:37:38 T:140158372394752 NOTICE: ES: Starting UDP Event server on 0.0.0.0:9777
18:37:38 T:140158372394752 NOTICE: UDP: Listening on port 9777
18:37:38 T:140159133337536 ERROR: JSONRPC Server: Failed to connect to sdpd
18:37:38 T:140159133337536 NOTICE: starting zeroconf publishing
18:37:39 T:140158722307840 NOTICE: -->Python Interpreter Initialized<--
18:37:39 T:140158730700544 NOTICE: Update Library Service starting...
18:37:40 T:140158405965568 NOTICE: -->Python Interpreter Initialized<--
18:37:40 T:140158688737024 NOTICE: -->Python Interpreter Initialized<--
18:37:40 T:140158730700544 NOTICE: service.libraryautoupdate: update timers
18:37:43 T:140158405965568 NOTICE: StorageServer Module loaded RUN
18:37:43 T:140158405965568 NOTICE: StorageClient-1.3.0 Starting server
18:37:43 T:140158405965568 NOTICE: StorageServer-1.3.0 Storage Server starting /home/paul/.xbmc/userdata/Database/commoncache.db
18:38:02 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:38:02 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:38:02 T:140158713915136 ERROR: Run: Unable to parse web site
18:38:23 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:38:23 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:38:23 T:140158713915136 ERROR: Run: Unable to parse web site
18:38:44 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:38:44 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:38:44 T:140158713915136 ERROR: Run: Unable to parse web site
18:39:06 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:39:06 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:39:06 T:140158713915136 ERROR: Run: Unable to parse web site
18:39:28 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:39:28 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:39:28 T:140158713915136 ERROR: Run: Unable to parse web site
18:39:49 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:39:49 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:39:49 T:140158713915136 ERROR: Run: Unable to parse web site
18:40:10 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:40:10 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:40:10 T:140158713915136 ERROR: Run: Unable to parse web site
18:40:31 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:40:31 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:40:31 T:140158713915136 ERROR: Run: Unable to parse web site
18:40:51 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:40:51 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:40:51 T:140158713915136 ERROR: Run: Unable to parse web site
18:41:12 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:41:12 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:41:12 T:140158713915136 ERROR: Run: Unable to parse web site
18:41:33 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:41:33 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:41:33 T:140158713915136 ERROR: Run: Unable to parse web site
18:41:54 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:41:54 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:41:54 T:140158713915136 ERROR: Run: Unable to parse web site
18:42:15 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:42:15 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:42:15 T:140158713915136 ERROR: Run: Unable to parse web site
18:42:18 T:140158713915136 NOTICE: VideoInfoScanner: Finished scan. Scanning for video info took 04:39
18:42:23 T:140158730700544 NOTICE: service.libraryautoupdate: Update Video Library
18:42:23 T:140158713915136 NOTICE: VideoInfoScanner: Starting scan ..
18:42:45 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:42:45 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:42:45 T:140158713915136 ERROR: Run: Unable to parse web site
18:43:06 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:43:06 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:43:06 T:140158713915136 ERROR: Run: Unable to parse web site
18:43:27 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:43:27 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:43:27 T:140158713915136 ERROR: Run: Unable to parse web site
18:43:48 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:43:48 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:43:48 T:140158713915136 ERROR: Run: Unable to parse web site
18:44:10 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:44:10 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:44:10 T:140158713915136 ERROR: Run: Unable to parse web site
18:44:31 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:44:31 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:44:31 T:140158713915136 ERROR: Run: Unable to parse web site
18:44:52 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:44:52 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:44:52 T:140158713915136 ERROR: Run: Unable to parse web site
18:45:13 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:45:13 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:45:13 T:140158713915136 ERROR: Run: Unable to parse web site
18:45:33 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:45:33 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:45:33 T:140158713915136 ERROR: Run: Unable to parse web site
18:45:54 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:45:54 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:45:54 T:140158713915136 ERROR: Run: Unable to parse web site
18:46:15 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:46:15 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:46:15 T:140158713915136 ERROR: Run: Unable to parse web site
18:46:36 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:46:36 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:46:36 T:140158713915136 ERROR: Run: Unable to parse web site
18:46:57 T:140158713915136 WARNING: FillBuffer: curl failed with code 28
18:46:57 T:140158713915136 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream.
18:46:57 T:140158713915136 ERROR: Run: Unable to parse web site
18:47:01 T:140158713915136 NOTICE: VideoInfoScanner: Finished scan. Scanning for video info took 04:37
Forum searches don't illuminate anyone with similar problems - although the tvdb has been having some down-time.
Any help would be much appreciated.
Last edited by tiprya (2012-10-14 20:53:21)

I believe this might be because the recently enabled ipv6 for thetvdb service.
After disabling 6to4 ipv6 in my router, scraping started working again.
Not a permanent solution but this will do for now.
See http://forums.thetvdb.com/viewtopic.php?f=4&t=11378

[SOLVED] Intel driver is not loading.

Hello,
I just got a new laptop and finally put Arch on it. I have to use "nomodeset" to see anything (Putting the intel_agp and i915 modules in the initramfs does not work, nor does the SVIDEO option.) and I installed xorg and xf86-video-intel, and ran startx, and it failed to run.
Below are my Xorg.log.0 and lspci -k outputs.
Xorg.log.0
[ 1307.124]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 1307.129] X Protocol Version 11, Revision 0
[ 1307.130] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 1307.131] Current Operating System: Linux spike 3.8.8-2-ARCH #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013 x86_64
[ 1307.131] Kernel command line: root=/dev/sda5 ro rootfstype=ext4 systemd.unit=graphical.target nomodeset initrd=EFI\arch\initramfs-arch.img
[ 1307.133] Build Date: 17 April 2013 02:37:06PM
[ 1307.134]
[ 1307.136] Current version of pixman: 0.28.2
[ 1307.138] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1307.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1307.142] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 25 17:51:54 2013
[ 1307.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1307.143] (==) No Layout section. Using the first Screen section.
[ 1307.143] (==) No screen section available. Using defaults.
[ 1307.143] (**) |-->Screen "Default Screen Section" (0)
[ 1307.143] (**) | |-->Monitor "<default monitor>"
[ 1307.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1307.144] (==) Automatically adding devices
[ 1307.144] (==) Automatically enabling devices
[ 1307.144] (==) Automatically adding GPU devices
[ 1307.144] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1307.144] Entry deleted from font path.
[ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1307.144] Entry deleted from font path.
[ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1307.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1307.144] Entry deleted from font path.
[ 1307.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1307.144] (==) FontPath set to:
/usr/share/fonts/misc/
[ 1307.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1307.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1307.144] (II) Loader magic: 0x7fcc20
[ 1307.144] (II) Module ABI versions:
[ 1307.144] X.Org ANSI C Emulation: 0.4
[ 1307.144] X.Org Video Driver: 14.1
[ 1307.144] X.Org XInput driver : 19.1
[ 1307.144] X.Org Server Extension : 7.0
[ 1307.145] (--) PCI:*(0:0:2:0) 8086:0116:103c:1854 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 1307.146] Initializing built-in extension Generic Event Extension
[ 1307.147] Initializing built-in extension SHAPE
[ 1307.148] Initializing built-in extension MIT-SHM
[ 1307.149] Initializing built-in extension XInputExtension
[ 1307.150] Initializing built-in extension XTEST
[ 1307.151] Initializing built-in extension BIG-REQUESTS
[ 1307.152] Initializing built-in extension SYNC
[ 1307.153] Initializing built-in extension XKEYBOARD
[ 1307.154] Initializing built-in extension XC-MISC
[ 1307.155] Initializing built-in extension SECURITY
[ 1307.156] Initializing built-in extension XINERAMA
[ 1307.157] Initializing built-in extension XFIXES
[ 1307.158] Initializing built-in extension RENDER
[ 1307.159] Initializing built-in extension RANDR
[ 1307.159] Initializing built-in extension COMPOSITE
[ 1307.160] Initializing built-in extension DAMAGE
[ 1307.161] Initializing built-in extension MIT-SCREEN-SAVER
[ 1307.162] Initializing built-in extension DOUBLE-BUFFER
[ 1307.163] Initializing built-in extension RECORD
[ 1307.163] Initializing built-in extension DPMS
[ 1307.164] Initializing built-in extension X-Resource
[ 1307.165] Initializing built-in extension XVideo
[ 1307.165] Initializing built-in extension XVideo-MotionCompensation
[ 1307.166] Initializing built-in extension XFree86-VidModeExtension
[ 1307.167] Initializing built-in extension XFree86-DGA
[ 1307.167] Initializing built-in extension XFree86-DRI
[ 1307.168] Initializing built-in extension DRI2
[ 1307.168] (II) LoadModule: "glx"
[ 1307.168] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1307.168] (II) Module glx: vendor="X.Org Foundation"
[ 1307.168] compiled for 1.14.1, module version = 1.0.0
[ 1307.168] ABI class: X.Org Server Extension, version 7.0
[ 1307.168] (==) AIGLX enabled
[ 1307.169] Loading extension GLX
[ 1307.169] (==) Matched intel as autoconfigured driver 0
[ 1307.169] (==) Matched vesa as autoconfigured driver 1
[ 1307.169] (==) Matched modesetting as autoconfigured driver 2
[ 1307.169] (==) Matched fbdev as autoconfigured driver 3
[ 1307.169] (==) Assigned the driver to the xf86ConfigLayout
[ 1307.169] (II) LoadModule: "intel"
[ 1307.169] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1307.169] (II) Module intel: vendor="X.Org Foundation"
[ 1307.169] compiled for 1.14.0, module version = 2.21.6
[ 1307.169] Module class: X.Org Video Driver
[ 1307.169] ABI class: X.Org Video Driver, version 14.1
[ 1307.169] (II) LoadModule: "vesa"
[ 1307.170] (WW) Warning, couldn't open module vesa
[ 1307.170] (II) UnloadModule: "vesa"
[ 1307.170] (II) Unloading vesa
[ 1307.170] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1307.170] (II) LoadModule: "modesetting"
[ 1307.170] (WW) Warning, couldn't open module modesetting
[ 1307.170] (II) UnloadModule: "modesetting"
[ 1307.170] (II) Unloading modesetting
[ 1307.170] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1307.170] (II) LoadModule: "fbdev"
[ 1307.170] (WW) Warning, couldn't open module fbdev
[ 1307.170] (II) UnloadModule: "fbdev"
[ 1307.170] (II) Unloading fbdev
[ 1307.170] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1307.170] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 1307.170] (++) using VT number 1
[ 1307.172] (EE) No devices detected.
[ 1307.172]
Fatal server error:
[ 1307.172] no screens found
[ 1307.172] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 1307.172] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1307.172] (EE)
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 1854
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 1854
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM75 Express Chipset LPC Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1854
01:00.0 Network controller: Ralink corp. Device 539b
Subsystem: Hewlett-Packard Company Device 18ed
Kernel driver in use: rt2800pci
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: rtsx_pci
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Hewlett-Packard Company Device 1854
Kernel driver in use: r8169
As you can see, i915 is not loaded for the VGA controller, even though it should be. I do a modprobe i915, in case for whatever reason udev can't seem to do it, run lspci -k and nothing changes. dmesg doesn't even seem to acknowledge that I did anything.
Does the i915 driver not support this chipset? That seems highly unlikely.
Last edited by Yaro (2013-04-26 14:07:36)

My computer on my signature is newer than yours and its supported.
I guess there is a backlight issue on your computer. try removing nomodeset and append
acpi_backlight=vendor
to your kernel comand line. Tell us what u see.

Lenovo Ideapad Y510p Blue Screened - Won't even reset??

Hi all,
I have had my Lenovo for a little over a year. It suddenly decided to direct me to a troubleshooting blue screen (with options such as refresh and reset) if I try turning it on (It's labeled by the computer as automatic system repair.). All the options on troubleshooting, such as refreshing, resetting, or performing a system restore, are not allowing me to use them.
I tried using the button near the charger to access the system restore and set it to its factory settings (with OneKey Recovery) but if I try turning it on, it still redirects to the automatic system repair and the blue screen. It is a month past warranty, so Lenovo is asking me for $99++ and 7+ business days to restore to factory settings.
must be an easier way? I have all my files on Carbonite, so I really just need to get to the factory setting. Could anyone help me with some ideas? I really need this computer for work. It used Windows 8, which is what it initially came with.
Thank you, and take care!!

Hi ArChLinuxOS. Thanks for your response!
I ordered some installation media from Lenovo. I realize that the menu I kept being redirected to is called the boot options menu. It has a lot of options, but I can't access any. I'm hoping that I can get it booted using it, but so far, it has not been allowing me to reset to factory settings.
Click here to view image #1
Click here to view image #2
Mod's Edit: Image converted to link due to its size. Please keeps images under 100k per forum guidelines.
Information about posting images in the forum can be found by clicking here.

Intel 6205 wireless not working with Lenovo W520

Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837

Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

New Thinkpad W530 order direct from Lenovo with integrated mobile will not connect to broadband

I purchased a W530 with integrated mobile and have been trying to connect with various networks to no avail. I have a Type 2436-CTO S/N xxxxxxx 13/08 and Windows 8 came installed when I received. I have upgraded BIOS and everything that Lenovo solutions says I need to update.
The MEID is A1xxxxxxxxxxx. It came with an integrated Sierra Wireless MC8355-Gobi 3000 modem. I have downloaded an updated driver for Windows 8 for the MC8355. I have spoken with almost every Lenovo technical person as well as taken the computer to various network stores and so far no one can figure out why it won't connect to Verizon.
Verizon says I'm active and the computer error message says I am not active. Every tech has tried to look at the system by logging into my computer and no one can figure it out. The device manager says the MC8355 is working. Interesting when it was shipped to me it also had an AT&T sim card installed. After I had signed up with AT&T and one mo of paying for service they determined it would not work on their network. Finally someone told me to take the AT&T sim card out and it still will not connect.
Verizon tells me I do not need a sim card as I have the MC8355 but they can't tell me why I can't connect. Now I've paid for Verizon service for one month and still cannot connect. Everything else works fine with the W530. I've owned ThinkPads exclusively since the first one ever came out. I've never not been able to connect to mobile broadband with any others. I also went through about two weeks of trying to connect with Lenovo Mobile Access and that did not work because I'm running Windows 8. Finally a nice gentleman called me from LMA to tell me it will not work after all the time of connecting and being on the road. I could go back to an old ThinkPad to travel with but I'm determined to get my new one to connect. Any more advice or anything anyone can tell me try?
Moderator Note; imei & s/n edited for member's own protection
Solved!
Go to Solution.

Hi swade01,
Have a look there: http://support.lenovo.com/en_US/detail.page?DocID=HT077670
It might help you hopefully.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Attention! Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1

Attention!
Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1 and Windows 8.1 Update (pre-installed operating system is Windows 8.0) .
More specifically, after update for Windows 8.1 all the drivers (including the latest) Intel (R) Iris (TM) graphics, Intel (R) Iris (TM) Pro graphics and Intel (R) HD GRAPHICS installed on this laptop does not support out of the sleep mode.
This has been checked many times by different users laptop Flex 10.
Any comments from Lenovo are absent. By Lenovo specifications for this notebook there are no conflicts with Windows 8.1. It is not true!
It is unclear why Lenovo has admitted this deficiency.
I think Lenovo Flex 10 is a mistake that will cost the company Lenovo.

Mine came with Windows 8.1

How to connect 3g dongle to android Lenovo Ideapad A10?

Hi...
I have just purchased android Lenovo Ideapad A10 , my question is which univesal dongle supports for this model , i had try with Iball Airway & Dlink 3G dongel but not connected to the GSM network , Its shows error while searchin d network , i hv also insert the New APN setting but still not connected to the network.

i think you should contact your service provider or let them fix it for you. We had same problem for my a8-50, i think its just the same. after two weeks annoying my network provider i can connect my tab now to 3g network.

[SOLVED] Intel Centrino 2230 Not Connecting - Lenovo Ideapad Y510p

Similar Messages

Maybe you are looking for