[SOLVED]Intel Xorg Fail

Hi everyone,
I've found I can no longer start X (just a black screen, no cursor) on my Thinkpad X201 with Intel graphics. It was working fine earlier today (though I did update when this happened), and I've retraced anything I've changed as best I can, but with no luck.
I have no xorg.conf, but do have a 20-intel.conf in xorg.conf.d (I added this after the problem occurred), otherwise the machine starts looking for vesa drivers.
EDIT: Interestingly enough, root can start X fine, and I'm definitely in the video group. Creating another user and adding them to the video group, they are also able to start X.
SOLUTION: I'm a tool. To anyone else with this issue, comment out things in your .xinitrc until you find an offending entry. D'oh!
X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH x86_64
Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
Build Date: 09 July 2011 07:52:32AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
And the obligatory Xorg.0.log
[ 1612.508]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 1612.508] X Protocol Version 11, Revision 0
[ 1612.508] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 1612.508] Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 1612.508] Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
[ 1612.508] Build Date: 09 July 2011 07:52:32AM
[ 1612.508]
[ 1612.508] Current version of pixman: 0.22.2
[ 1612.508] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1612.508] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1612.509] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
[ 1612.509] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1612.509] (==) No Layout section. Using the first Screen section.
[ 1612.509] (==) No screen section available. Using defaults.
[ 1612.509] (**) |-->Screen "Default Screen Section" (0)
[ 1612.509] (**) | |-->Monitor "<default monitor>"
[ 1612.509] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1612.509] (**) | |-->Device "old Intel"
[ 1612.509] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1612.509] (==) Automatically adding devices
[ 1612.509] (==) Automatically enabling devices
[ 1612.509] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1612.509] Entry deleted from font path.
[ 1612.509] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1612.509] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1612.510] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1612.510] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1612.510] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1612.510] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1612.510] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1612.510] (II) Loader magic: 0x7d3440
[ 1612.510] (II) Module ABI versions:
[ 1612.510] X.Org ANSI C Emulation: 0.4
[ 1612.510] X.Org Video Driver: 10.0
[ 1612.510] X.Org XInput driver : 12.2
[ 1612.510] X.Org Server Extension : 5.0
[ 1612.511] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 1612.511] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1612.511] (II) LoadModule: "extmod"
[ 1612.511] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1612.511] (II) Module extmod: vendor="X.Org Foundation"
[ 1612.511] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension MIT-SCREEN-SAVER
[ 1612.512] (II) Loading extension XFree86-VidModeExtension
[ 1612.512] (II) Loading extension XFree86-DGA
[ 1612.512] (II) Loading extension DPMS
[ 1612.512] (II) Loading extension XVideo
[ 1612.512] (II) Loading extension XVideo-MotionCompensation
[ 1612.512] (II) Loading extension X-Resource
[ 1612.512] (II) LoadModule: "dbe"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1612.512] (II) Module dbe: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension DOUBLE-BUFFER
[ 1612.512] (II) LoadModule: "glx"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1612.512] (II) Module glx: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (==) AIGLX enabled
[ 1612.513] (II) Loading extension GLX
[ 1612.513] (II) LoadModule: "record"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1612.513] (II) Module record: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.13.0
[ 1612.513] Module class: X.Org Server Extension
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension RECORD
[ 1612.513] (II) LoadModule: "dri"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1612.513] (II) Module dri: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.0.0
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension XFree86-DRI
[ 1612.513] (II) LoadModule: "dri2"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1612.514] (II) Module dri2: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.3, module version = 1.2.0
[ 1612.514] ABI class: X.Org Server Extension, version 5.0
[ 1612.514] (II) Loading extension DRI2
[ 1612.514] (II) LoadModule: "intel"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.514] (II) Module intel: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.2, module version = 2.15.0
[ 1612.514] Module class: X.Org Video Driver
[ 1612.514] ABI class: X.Org Video Driver, version 10.0
[ 1612.514] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1612.515] (--) using VT number 7
[ 1612.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: drmOpenMinor returns 9
[ 1612.522] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1612.522] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1612.522] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1612.522] (==) intel(0): RGB weight 888
[ 1612.522] (==) intel(0): Default visual is TrueColor
[ 1612.522] (**) intel(0): Option "DRI" "false"
[ 1612.522] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 1612.522] (--) intel(0): Chipset: "Arrandale"
[ 1612.522] (**) intel(0): Relaxed fencing enabled
[ 1612.522] (**) intel(0): Framebuffer tiled
[ 1612.522] (**) intel(0): Pixmaps tiled
[ 1612.522] (**) intel(0): 3D buffers tiled
[ 1612.522] (**) intel(0): SwapBuffers wait enabled
[ 1612.522] (==) intel(0): video overlay key set to 0x101fe
[ 1612.523] (II) intel(0): Output LVDS1 has no monitor section
[ 1612.523] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 1612.523] (II) intel(0): Output VGA1 has no monitor section
[ 1612.546] (II) intel(0): Output HDMI1 has no monitor section
[ 1612.547] (II) intel(0): Output DP1 has no monitor section
[ 1612.547] (II) intel(0): EDID for output LVDS1
[ 1612.547] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0
[ 1612.547] (II) intel(0): Year: 2009 Week: 0
[ 1612.547] (II) intel(0): EDID Version: 1.3
[ 1612.547] (II) intel(0): Digital Display Input
[ 1612.547] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 1612.547] (II) intel(0): Gamma: 2.20
[ 1612.547] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 1612.547] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1612.547] (II) intel(0): First detailed timing is preferred mode
[ 1612.547] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: 0.549
[ 1612.547] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 1612.547] (II) intel(0): Manufacturer's mask: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 57.8 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Unknown vendor-specific block f
[ 1612.547] (II) intel(0): LP121WX3-TLC1
[ 1612.547] (II) intel(0): EDID (in hex):
[ 1612.547] (II) intel(0): 00ffffffffffff0030ae114000000000
[ 1612.547] (II) intel(0): 00130103801a1078eaba959759558c27
[ 1612.547] (II) intel(0): 21505400000001010101010101010101
[ 1612.547] (II) intel(0): 010101010101121b0080502014301820
[ 1612.547] (II) intel(0): 440005a31000001f9316008050201430
[ 1612.547] (II) intel(0): 1820440005a31000001f0000000f0081
[ 1612.547] (II) intel(0): 0a3c810a3216090030e4f001000000fe
[ 1612.547] (II) intel(0): 004c503132315758332d544c433100ac
[ 1612.547] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 1612.547] (II) intel(0): Printing DDC gathered Modelines:
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Printing probed modes for output LVDS1
[ 1612.548] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.548] (II) intel(0): Modeline "1280x800"x50.1 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1612.548] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1612.548] (II) intel(0): EDID for output VGA1
[ 1612.571] (II) intel(0): EDID for output HDMI1
[ 1612.572] (II) intel(0): EDID for output DP1
[ 1612.572] (II) intel(0): Output LVDS1 connected
[ 1612.572] (II) intel(0): Output VGA1 disconnected
[ 1612.572] (II) intel(0): Output HDMI1 disconnected
[ 1612.572] (II) intel(0): Output DP1 disconnected
[ 1612.572] (II) intel(0): Using exact sizes for initial modes
[ 1612.572] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 1612.572] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1612.572] (II) intel(0): Kernel page flipping support detected, enabling
[ 1612.572] (**) intel(0): Display dimensions: (260, 160) mm
[ 1612.572] (**) intel(0): DPI set to (125, 127)
[ 1612.572] (II) Loading sub module "fb"
[ 1612.572] (II) LoadModule: "fb"
[ 1612.572] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1612.572] (II) Module fb: vendor="X.Org Foundation"
[ 1612.572] compiled for 1.10.3, module version = 1.0.0
[ 1612.572] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1612.572] (==) Depth 24 pixmap format is 32 bpp
[ 1612.572] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 1612.578] (II) UXA(0): Driver registered support for the following operations:
[ 1612.578] (II) solid
[ 1612.578] (II) copy
[ 1612.578] (II) composite (RENDER acceleration)
[ 1612.578] (II) put_image
[ 1612.578] (II) get_image
[ 1612.578] (==) intel(0): Backing store disabled
[ 1612.578] (==) intel(0): Silken mouse enabled
[ 1612.578] (II) intel(0): Initializing HW Cursor
[ 1612.640] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1612.642] (==) intel(0): DPMS enabled
[ 1612.642] (==) intel(0): Intel XvMC decoder enabled
[ 1612.642] (II) intel(0): Set up textured video
[ 1612.642] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1612.642] (II) intel(0): direct rendering: Disabled
[ 1612.642] (==) intel(0): hotplug detection: "enabled"
[ 1612.642] (--) RandR disabled
[ 1612.642] (II) Initializing built-in extension Generic Event Extension
[ 1612.642] (II) Initializing built-in extension SHAPE
[ 1612.642] (II) Initializing built-in extension MIT-SHM
[ 1612.642] (II) Initializing built-in extension XInputExtension
[ 1612.642] (II) Initializing built-in extension XTEST
[ 1612.642] (II) Initializing built-in extension BIG-REQUESTS
[ 1612.642] (II) Initializing built-in extension SYNC
[ 1612.642] (II) Initializing built-in extension XKEYBOARD
[ 1612.642] (II) Initializing built-in extension XC-MISC
[ 1612.642] (II) Initializing built-in extension SECURITY
[ 1612.642] (II) Initializing built-in extension XINERAMA
[ 1612.642] (II) Initializing built-in extension XFIXES
[ 1612.642] (II) Initializing built-in extension RENDER
[ 1612.642] (II) Initializing built-in extension RANDR
[ 1612.642] (II) Initializing built-in extension COMPOSITE
[ 1612.642] (II) Initializing built-in extension DAMAGE
[ 1612.649] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1612.649] (II) AIGLX: Screen 0 is not DRI capable
[ 1612.651] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 1612.651] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1612.651] (II) intel(0): Setting screen physical size to 338 x 211
[ 1612.704] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1612.704] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1612.704] (II) LoadModule: "evdev"
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (II) Module evdev: vendor="X.Org Foundation"
[ 1612.704] compiled for 1.10.0, module version = 2.6.0
[ 1612.704] Module class: X.Org XInput Driver
[ 1612.704] ABI class: X.Org XInput driver, version 12.2
[ 1612.704] (II) Using input driver 'evdev' for 'Power Button'
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (**) Power Button: always reports core events
[ 1612.704] (**) Power Button: Device: "/dev/input/event3"
[ 1612.756] (--) Power Button: Found keys
[ 1612.756] (II) Power Button: Configuring as keyboard
[ 1612.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1612.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1612.756] (**) Option "xkb_rules" "evdev"
[ 1612.756] (**) Option "xkb_model" "evdev"
[ 1612.756] (**) Option "xkb_layout" "us"
[ 1612.796] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1612.796] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1612.796] (II) Using input driver 'evdev' for 'Video Bus'
[ 1612.796] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.796] (**) Video Bus: always reports core events
[ 1612.796] (**) Video Bus: Device: "/dev/input/event6"
[ 1612.833] (--) Video Bus: Found keys
[ 1612.833] (II) Video Bus: Configuring as keyboard
[ 1612.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 1612.833] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1612.833] (**) Option "xkb_rules" "evdev"
[ 1612.833] (**) Option "xkb_model" "evdev"
[ 1612.833] (**) Option "xkb_layout" "us"
[ 1612.841] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1612.841] (II) No input driver/identifier specified (ignoring)
[ 1612.842] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1612.842] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1612.842] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1612.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.842] (**) Sleep Button: always reports core events
[ 1612.842] (**) Sleep Button: Device: "/dev/input/event2"
[ 1612.856] (--) Sleep Button: Found keys
[ 1612.856] (II) Sleep Button: Configuring as keyboard
[ 1612.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 1612.856] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 1612.856] (**) Option "xkb_rules" "evdev"
[ 1612.856] (**) Option "xkb_model" "evdev"
[ 1612.856] (**) Option "xkb_layout" "us"
[ 1612.861] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 1612.861] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 1612.861] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 1612.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.861] (**) Integrated Camera: always reports core events
[ 1612.861] (**) Integrated Camera: Device: "/dev/input/event9"
[ 1612.879] (--) Integrated Camera: Found keys
[ 1612.880] (II) Integrated Camera: Configuring as keyboard
[ 1612.880] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9/event9"
[ 1612.880] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 1612.880] (**) Option "xkb_rules" "evdev"
[ 1612.880] (**) Option "xkb_model" "evdev"
[ 1612.880] (**) Option "xkb_layout" "us"
[ 1612.880] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 1612.880] (II) No input driver/identifier specified (ignoring)
[ 1612.887] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1612.887] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1612.887] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1612.887] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.887] (**) AT Translated Set 2 keyboard: always reports core events
[ 1612.887] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1612.906] (--) AT Translated Set 2 keyboard: Found keys
[ 1612.906] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1612.906] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1612.906] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1612.906] (**) Option "xkb_rules" "evdev"
[ 1612.906] (**) Option "xkb_model" "evdev"
[ 1612.906] (**) Option "xkb_layout" "us"
[ 1612.907] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1612.907] (II) LoadModule: "synaptics"
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (II) Module synaptics: vendor="X.Org Foundation"
[ 1612.907] compiled for 1.10.2, module version = 1.4.1
[ 1612.907] Module class: X.Org XInput Driver
[ 1612.907] ABI class: X.Org XInput driver, version 12.2
[ 1612.907] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1612.907] (**) Option "Device" "/dev/input/event8"
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1613.040] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1613.040] (**) Option "TapButton1" "1"
[ 1613.040] (**) Option "TapButton2" "2"
[ 1613.040] (**) Option "TapButton3" "3"
[ 1613.146] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.146] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1613.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 1613.199] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1613.279] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.280] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1613.280] (II) No input driver/identifier specified (ignoring)
[ 1613.280] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 1613.280] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 1613.280] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.280] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 1613.306] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 1613.306] (**) Option "Emulate3Buttons" "false"
[ 1613.306] (**) Option "EmulateWheel" "true"
[ 1613.306] (**) Option "EmulateWheelButton" "2"
[ 1613.306] (**) Option "YAxisMapping" "4 5"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 1613.306] (**) Option "XAxisMapping" "6 7"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 1613.306] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1613.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
[ 1613.306] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 1613.306] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 1613.307] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.307] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.308] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 1613.308] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 1613.308] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 1613.308] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.308] (**) ThinkPad Extra Buttons: always reports core events
[ 1613.308] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 1613.333] (--) ThinkPad Extra Buttons: Found keys
[ 1613.333] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 1613.333] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 1613.333] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 1613.333] (**) Option "xkb_rules" "evdev"
[ 1613.333] (**) Option "xkb_model" "evdev"
[ 1613.333] (**) Option "xkb_layout" "us"
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event11)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event12)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
I'm completely stumped. Does anyone have any ideas?
Thanks in advance,
Mike
Last edited by MikeEcho (2011-07-20 00:39:25)

Similar Messages

Xorg fails with "/usr/lib/libexpat.so.1: invalid ELF header"

After upgrade, Xorg fails with the following message:
(EE) AIGLX error: dlopen of usr/lib/xorg/modules/dri/i965_dri.so failed (/usr/lib/libexpat.so.1: invalid ELF header)
(EE) AIGLX: reverting to software rendering
openbox: error while loading shared libraries: /usr/lib/libexpat.so.1: invalid ELF header
(I also get en error about fbcon, fbdev modules, but have read that this is not actually an issue.)
Thanks for any help.
Last edited by marimo (2010-01-24 07:12:25)

If it were different architectures, there would be an ELF class error. Assuming that all of the installed libraries are from the Arch repos, I'm betting that expat is corrupt. I would reinstall expat and see if that solves the problem.

Linux-api-headers & python-imaging upgraded, Xorg fails.

Hey archers, as the title says, I upgraded. It just asked me to replace kernel-headers with linux-api-headers and to replace php-(something?) with php-input(I think). It may not have been php, but it was something along those lines. Before, xorg wouldn't start, I would login, be flashed with a black screen, and then kicked back to the login screen again. Then I used 'sudo pacman -S slim' Now, Slim wont boot, the log says it's missing a library, and /etc/bin/slim doesn't exist anymore. I would post the logs of Xorg and slim, but i'm using the links browser in the terminal from within my broken system. Xorg complains of something along the lines: {WW}fail Drm device three or four times and then it loads my evdev (_Logitech gaming) mouse, did something along the lines of: {WW}module failed to load before quitting. I'm guessing the problem has something to do with upgrading to the linux-api-headers, since nothing went wrong until I rebooted my computer.
Last edited by silversnakeeyes (2010-02-11 21:42:20)

I checked the log, and you're right, it wasn't just the api-headers. What else was installed/removed & replaced:
lxde-settings-daemon --> lxsession-lite
pil --> python-imaging (where did I get php-input from?)
upgraded slim
upgraded libjpeg
and the log for Slim(wrote it down this time):
Dropping Master
slim: unexpected signal 15
(EE) intel(0): failed to initialize kernel memory manager
setting master
record: extension enabled at configuration time
record: this extension is known to be broken, disabling extension now.
record: bigs.freedesktop.org/show_bug.cgi?id=20500
[config:Dbus] couldn't register object path
dropping master
Any ideas?

[Solved]xorg fails to start, integrated nvidia gpu with intel

Arch 32 Bit system
When i start X server it says server terminated succesfully.
the output of "lspci | grep VGA"
00:02:0 VGA Compatible Controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00:0 VGA Compatible Controller: NVIDIA Corporation GF108M [GrForce GT 540M] (rev a1)
I installed xf86-video-modesettings xf86-video-fbdev nvidia nvidia-libgl nvidia-utils xorg-server xorg-server-utils xorg-xinit xterm xorg-twm xorg-xclock
I guess the problem is monitor cant be detected but i dont know how can i make nvidia to find it. Look at Monitor section at 10-nvidia.conf and also Xorg.0.log.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-18) Fri Apr 4 15:15:13 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
xorg.conf.d/10-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
And finally
/var/log/Xorg.0.log
[ 37.622]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 37.622] X Protocol Version 11, Revision 0
[ 37.622] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 37.622] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 37.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 37.623] Build Date: 14 April 2014 08:41:02AM
[ 37.623]
[ 37.623] Current version of pixman: 0.32.4
[ 37.623] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 37.623] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.624] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 14:31:33 2014
[ 37.644] (==) Using config file: "/etc/X11/xorg.conf"
[ 37.644] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.680] (==) ServerLayout "Layout0"
[ 37.680] (**) |-->Screen "Screen0" (0)
[ 37.680] (**) | |-->Monitor "Monitor0"
[ 37.680] (**) | |-->Device "Device0"
[ 37.680] (**) |-->Input Device "Keyboard0"
[ 37.681] (**) |-->Input Device "Mouse0"
[ 37.681] (==) Automatically adding devices
[ 37.681] (==) Automatically enabling devices
[ 37.681] (==) Automatically adding GPU devices
[ 37.725] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 37.725] Entry deleted from font path.
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 37.726] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 37.726] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 37.726] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 37.726] (WW) Disabling Keyboard0
[ 37.726] (WW) Disabling Mouse0
[ 37.727] (II) Loader magic: 0x8264660
[ 37.727] (II) Module ABI versions:
[ 37.727] X.Org ANSI C Emulation: 0.4
[ 37.727] X.Org Video Driver: 15.0
[ 37.727] X.Org XInput driver : 20.0
[ 37.727] X.Org Server Extension : 8.0
[ 37.727] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 37.728] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 37.731] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 37.731] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 37.732] (II) Open ACPI successful (/var/run/acpid.socket)
[ 37.732] Initializing built-in extension Generic Event Extension
[ 37.732] Initializing built-in extension SHAPE
[ 37.732] Initializing built-in extension MIT-SHM
[ 37.732] Initializing built-in extension XInputExtension
[ 37.733] Initializing built-in extension XTEST
[ 37.733] Initializing built-in extension BIG-REQUESTS
[ 37.733] Initializing built-in extension SYNC
[ 37.733] Initializing built-in extension XKEYBOARD
[ 37.733] Initializing built-in extension XC-MISC
[ 37.733] Initializing built-in extension SECURITY
[ 37.733] Initializing built-in extension XINERAMA
[ 37.733] Initializing built-in extension XFIXES
[ 37.733] Initializing built-in extension RENDER
[ 37.733] Initializing built-in extension RANDR
[ 37.734] Initializing built-in extension COMPOSITE
[ 37.734] Initializing built-in extension DAMAGE
[ 37.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 37.734] Initializing built-in extension DOUBLE-BUFFER
[ 37.734] Initializing built-in extension RECORD
[ 37.734] Initializing built-in extension DPMS
[ 37.734] Initializing built-in extension Present
[ 37.736] Initializing built-in extension DRI3
[ 37.739] Initializing built-in extension X-Resource
[ 37.741] Initializing built-in extension XVideo
[ 37.743] Initializing built-in extension XVideo-MotionCompensation
[ 37.745] Initializing built-in extension XFree86-VidModeExtension
[ 37.747] Initializing built-in extension XFree86-DGA
[ 37.748] Initializing built-in extension XFree86-DRI
[ 37.750] Initializing built-in extension DRI2
[ 37.750] (II) LoadModule: "glx"
[ 37.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 38.573] (II) Module glx: vendor="NVIDIA Corporation"
[ 38.573] compiled for 4.0.2, module version = 1.0.0
[ 38.573] Module class: X.Org Server Extension
[ 38.573] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 38.575] Loading extension GLX
[ 38.575] (II) LoadModule: "nvidia"
[ 38.575] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 38.641] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 38.641] compiled for 4.0.2, module version = 1.0.0
[ 38.641] Module class: X.Org Video Driver
[ 38.652] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 38.653] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 38.654] (++) using VT number 2
[ 38.655] (II) Loading sub module "fb"
[ 38.655] (II) LoadModule: "fb"
[ 38.656] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38.668] (II) Module fb: vendor="X.Org Foundation"
[ 38.668] compiled for 1.15.1, module version = 1.0.0
[ 38.668] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.668] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 38.668] (II) Loading sub module "wfb"
[ 38.668] (II) LoadModule: "wfb"
[ 38.669] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 38.671] (II) Module wfb: vendor="X.Org Foundation"
[ 38.671] compiled for 1.15.1, module version = 1.0.0
[ 38.671] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.671] (II) Loading sub module "ramdac"
[ 38.671] (II) LoadModule: "ramdac"
[ 38.671] (II) Module "ramdac" already built-in
[ 38.675] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 38.675] (==) NVIDIA(0): RGB weight 888
[ 38.675] (==) NVIDIA(0): Default visual is TrueColor
[ 38.675] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.676] (**) NVIDIA(0): Enabling 2D acceleration
[ 45.267] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 45.268] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 45.270] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 45.270] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 45.270] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 45.270] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 45.275] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 45.275] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 45.275] (--) NVIDIA(0): DFP-0
[ 45.275] (--) NVIDIA(0): DFP-1
[ 45.275] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 45.275] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 45.275] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 45.275] (**) NVIDIA(0): all display devices.)
[ 45.276] (==) NVIDIA(0):
[ 45.276] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 45.276] (==) NVIDIA(0): will be used as the requested mode.
[ 45.276] (==) NVIDIA(0):
[ 45.277] (II) NVIDIA(0): Validated MetaModes:
[ 45.277] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 45.277] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 45.281] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 45.281] (WW) NVIDIA(0): from CRT-0's EDID.
[ 45.281] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 45.281] (--) Depth 24 pixmap format is 32 bpp
[ 45.281] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 45.281] (II) NVIDIA: access.
[ 45.499] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 45.544] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 45.544] Loading extension NV-GLX
[ 45.648] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 45.649] (==) NVIDIA(0): Backing store enabled
[ 45.649] (==) NVIDIA(0): Silken mouse enabled
[ 45.651] (**) NVIDIA(0): DPMS enabled
[ 45.651] Loading extension NV-CONTROL
[ 45.651] Loading extension XINERAMA
[ 45.651] (II) Loading sub module "dri2"
[ 45.651] (II) LoadModule: "dri2"
[ 45.651] (II) Module "dri2" already built-in
[ 45.651] (II) NVIDIA(0): [DRI2] Setup complete
[ 45.652] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 45.652] (--) RandR disabled
[ 45.673] (II) Initializing extension GLX
[ 45.973] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 45.973] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.973] (II) LoadModule: "evdev"
[ 45.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 46.007] (II) Module evdev: vendor="X.Org Foundation"
[ 46.007] compiled for 1.15.0, module version = 2.8.2
[ 46.007] Module class: X.Org XInput Driver
[ 46.007] ABI class: X.Org XInput driver, version 20.0
[ 46.007] (II) Using input driver 'evdev' for 'Power Button'
[ 46.007] (**) Power Button: always reports core events
[ 46.007] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 46.007] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.007] (--) evdev: Power Button: Found keys
[ 46.007] (II) evdev: Power Button: Configuring as keyboard
[ 46.007] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 46.007] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 46.007] (**) Option "xkb_rules" "evdev"
[ 46.007] (**) Option "xkb_model" "pc104"
[ 46.007] (**) Option "xkb_layout" "us"
[ 46.062] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 46.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.063] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.063] (**) Video Bus: always reports core events
[ 46.063] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 46.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.063] (--) evdev: Video Bus: Found keys
[ 46.063] (II) evdev: Video Bus: Configuring as keyboard
[ 46.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 46.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 46.063] (**) Option "xkb_rules" "evdev"
[ 46.063] (**) Option "xkb_model" "pc104"
[ 46.063] (**) Option "xkb_layout" "us"
[ 46.064] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 46.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 46.064] (II) Using input driver 'evdev' for 'Power Button'
[ 46.064] (**) Power Button: always reports core events
[ 46.064] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 46.064] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.064] (--) evdev: Power Button: Found keys
[ 46.064] (II) evdev: Power Button: Configuring as keyboard
[ 46.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 46.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 46.064] (**) Option "xkb_rules" "evdev"
[ 46.064] (**) Option "xkb_model" "pc104"
[ 46.064] (**) Option "xkb_layout" "us"
[ 46.066] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 46.066] (II) No input driver specified, ignoring this device.
[ 46.066] (II) This device may have been added with another device file.
[ 46.066] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 46.066] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 46.066] (II) Using input driver 'evdev' for 'Sleep Button'
[ 46.066] (**) Sleep Button: always reports core events
[ 46.066] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 46.066] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 46.066] (--) evdev: Sleep Button: Found keys
[ 46.066] (II) evdev: Sleep Button: Configuring as keyboard
[ 46.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 46.067] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 46.067] (**) Option "xkb_rules" "evdev"
[ 46.067] (**) Option "xkb_model" "pc104"
[ 46.067] (**) Option "xkb_layout" "us"
[ 46.068] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 46.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.068] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.068] (**) Video Bus: always reports core events
[ 46.068] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 46.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.068] (--) evdev: Video Bus: Found keys
[ 46.068] (II) evdev: Video Bus: Configuring as keyboard
[ 46.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 46.068] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 46.068] (**) Option "xkb_rules" "evdev"
[ 46.068] (**) Option "xkb_model" "pc104"
[ 46.068] (**) Option "xkb_layout" "us"
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 46.070] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event6)
[ 46.070] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 46.070] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 46.070] (**) 1.3M HD WebCam: always reports core events
[ 46.070] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event6"
[ 46.070] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 46.070] (--) evdev: 1.3M HD WebCam: Found keys
[ 46.070] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 46.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event6"
[ 46.070] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 46.070] (**) Option "xkb_rules" "evdev"
[ 46.070] (**) Option "xkb_model" "pc104"
[ 46.070] (**) Option "xkb_layout" "us"
[ 46.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 46.071] (II) No input driver specified, ignoring this device.
[ 46.071] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 46.073] (II) No input driver specified, ignoring this device.
[ 46.073] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.073] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 46.073] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 46.074] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.074] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 46.074] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 46.074] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.074] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 46.074] (**) Option "xkb_rules" "evdev"
[ 46.074] (**) Option "xkb_model" "pc104"
[ 46.074] (**) Option "xkb_layout" "us"
[ 46.075] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 46.075] (II) LoadModule: "synaptics"
[ 46.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 46.092] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.092] compiled for 1.15.0, module version = 1.7.4
[ 46.092] Module class: X.Org XInput Driver
[ 46.092] ABI class: X.Org XInput driver, version 20.0
[ 46.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 46.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.092] (**) Option "Device" "/dev/input/event15"
[ 46.250] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 46.250] (**) Option "TapButton1" "1"
[ 46.250] (**) Option "TapButton2" "2"
[ 46.250] (**) Option "TapButton3" "3"
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.250] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[ 46.316] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 46.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.318] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 46.318] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 46.319] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 46.319] (II) No input driver specified, ignoring this device.
[ 46.319] (II) This device may have been added with another device file.
[ 46.319] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
[ 46.319] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 46.320] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 46.320] (**) Acer WMI hotkeys: always reports core events
[ 46.320] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event8"
[ 46.320] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 46.320] (--) evdev: Acer WMI hotkeys: Found keys
[ 46.320] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 46.320] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 46.320] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 46.320] (**) Option "xkb_rules" "evdev"
[ 46.320] (**) Option "xkb_model" "pc104"
[ 46.320] (**) Option "xkb_layout" "us"
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event9)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 57.547] (II) evdev: Acer WMI hotkeys: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.547] (II) UnloadModule: "synaptics"
[ 57.547] (II) evdev: AT Translated Set 2 keyboard: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: 1.3M HD WebCam: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Sleep Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.580] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 57.589] (EE) Server terminated successfully (0). Closing log file.
Last edited by hozturk0327 (2014-04-28 14:32:36)

I realized that instead of this
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto
i used
xrandr --setprovideroutputsource NVIDIA-0
xrandr --auto
Now it is fixed.
And sorry Kartious i thought i uploaded ~/.xinitrc.
EDIT:
uname -a outputs
Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08: CEST 2014 i686 GNU/Linux
Also this is the new Xorg.0.log
[ 17.166]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17.166] X Protocol Version 11, Revision 0
[ 17.166] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 17.167] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 17.167] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 17.167] Build Date: 14 April 2014 08:41:02AM
[ 17.167]
[ 17.167] Current version of pixman: 0.32.4
[ 17.167] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW.) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.168] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 16:45:17 2014
[ 17.210] (==) Using config file: "/etc/X11/xorg.conf"
[ 17.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.246] (==) ServerLayout "layout"
[ 17.246] (**) |-->Screen "nvidia" (0)
[ 17.246] (**) | |-->Monitor "<default monitor>"
[ 17.247] (**) | |-->Device "nvidia"
[ 17.247] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 17.247] (**) |-->Inactive Device "intel"
[ 17.247] (==) Automatically adding devices
[ 17.247] (==) Automatically enabling devices
[ 17.247] (==) Automatically adding GPU devices
[ 17.290] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.291] Entry deleted from font path.
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17.292] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17.292] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.292] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.293] (II) Loader magic: 0x8264660
[ 17.293] (II) Module ABI versions:
[ 17.293] X.Org ANSI C Emulation: 0.4
[ 17.293] X.Org Video Driver: 15.0
[ 17.293] X.Org XInput driver : 20.0
[ 17.293] X.Org Server Extension : 8.0
[ 17.293] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 17.294] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.297] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 17.297] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 17.297] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.298] Initializing built-in extension Generic Event Extension
[ 17.298] Initializing built-in extension SHAPE
[ 17.298] Initializing built-in extension MIT-SHM
[ 17.298] Initializing built-in extension XInputExtension
[ 17.299] Initializing built-in extension XTEST
[ 17.299] Initializing built-in extension BIG-REQUESTS
[ 17.299] Initializing built-in extension SYNC
[ 17.299] Initializing built-in extension XKEYBOARD
[ 17.299] Initializing built-in extension XC-MISC
[ 17.299] Initializing built-in extension SECURITY
[ 17.299] Initializing built-in extension XINERAMA
[ 17.299] Initializing built-in extension XFIXES
[ 17.299] Initializing built-in extension RENDER
[ 17.299] Initializing built-in extension RANDR
[ 17.300] Initializing built-in extension COMPOSITE
[ 17.300] Initializing built-in extension DAMAGE
[ 17.300] Initializing built-in extension MIT-SCREEN-SAVER
[ 17.300] Initializing built-in extension DOUBLE-BUFFER
[ 17.300] Initializing built-in extension RECORD
[ 17.300] Initializing built-in extension DPMS
[ 17.300] Initializing built-in extension Present
[ 17.302] Initializing built-in extension DRI3
[ 17.305] Initializing built-in extension X-Resource
[ 17.307] Initializing built-in extension XVideo
[ 17.309] Initializing built-in extension XVideo-MotionCompensation
[ 17.311] Initializing built-in extension XFree86-VidModeExtension
[ 17.313] Initializing built-in extension XFree86-DGA
[ 17.314] Initializing built-in extension XFree86-DRI
[ 17.316] Initializing built-in extension DRI2
[ 17.316] (II) LoadModule: "glx"
[ 17.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.139] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.139] compiled for 4.0.2, module version = 1.0.0
[ 18.139] Module class: X.Org Server Extension
[ 18.139] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 18.141] Loading extension GLX
[ 18.141] (II) LoadModule: "nvidia"
[ 18.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.207] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.207] compiled for 4.0.2, module version = 1.0.0
[ 18.207] Module class: X.Org Video Driver
[ 18.217] (II) LoadModule: "modesetting"
[ 18.217] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.223] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.223] compiled for 1.15.0, module version = 0.8.1
[ 18.223] Module class: X.Org Video Driver
[ 18.223] ABI class: X.Org Video Driver, version 15.0
[ 18.224] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 18.224] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.225] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.225] (++) using VT number 1
[ 18.227] (II) Loading sub module "fb"
[ 18.227] (II) LoadModule: "fb"
[ 18.227] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.234] (II) Module fb: vendor="X.Org Foundation"
[ 18.234] compiled for 1.15.1, module version = 1.0.0
[ 18.234] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.234] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 18.234] (II) Loading sub module "wfb"
[ 18.234] (II) LoadModule: "wfb"
[ 18.235] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.237] (II) Module wfb: vendor="X.Org Foundation"
[ 18.237] compiled for 1.15.1, module version = 1.0.0
[ 18.237] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.237] (II) Loading sub module "ramdac"
[ 18.237] (II) LoadModule: "ramdac"
[ 18.237] (II) Module "ramdac" already built-in
[ 18.240] (II) modesetting(1): using drv /dev/dri/card0
[ 18.240] (II) modesetting(G0): using drv /dev/dri/card0
[ 18.240] (EE) Screen 1 deleted because of no matching config section.
[ 18.240] (II) UnloadModule: "modesetting"
[ 18.240] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 18.240] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.240] (==) NVIDIA(0): RGB weight 888
[ 18.240] (==) NVIDIA(0): Default visual is TrueColor
[ 18.240] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.241] (**) NVIDIA(0): Enabling 2D acceleration
[ 24.989] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 24.989] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 24.992] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 24.992] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 24.992] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 24.992] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.997] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 24.997] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 24.997] (--) NVIDIA(0): DFP-0
[ 24.997] (--) NVIDIA(0): DFP-1
[ 24.997] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 24.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.997] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 24.997] (**) NVIDIA(0): all display devices.)
[ 25.000] (==) NVIDIA(0):
[ 25.000] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 25.000] (==) NVIDIA(0): will be used as the requested mode.
[ 25.000] (==) NVIDIA(0):
[ 25.001] (II) NVIDIA(0): Validated MetaModes:
[ 25.001] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 25.001] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 25.006] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 25.006] (WW) NVIDIA(0): from CRT-0's EDID.
[ 25.006] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 25.006] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 25.006] (==) modesetting(G0): RGB weight 888
[ 25.006] (==) modesetting(G0): Default visual is TrueColor
[ 25.006] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 25.006] (II) modesetting(G0): Output LVDS-1-0 has no monitor section
[ 25.008] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): EDID for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 25.009] (II) modesetting(G0): Year: 2009 Week: 1
[ 25.009] (II) modesetting(G0): EDID Version: 1.3
[ 25.009] (II) modesetting(G0): Digital Display Input
[ 25.009] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 25.009] (II) modesetting(G0): Gamma: 2.20
[ 25.009] (II) modesetting(G0): No DPMS capabilities specified
[ 25.009] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.009] (II) modesetting(G0): First detailed timing is preferred mode
[ 25.009] (II) modesetting(G0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 25.009] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 25.009] (II) modesetting(G0): Manufacturer's mask: 0
[ 25.009] (II) modesetting(G0): Supported detailed timing:
[ 25.009] (II) modesetting(G0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 25.009] (II) modesetting(G0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 25.009] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 25.009] (II) modesetting(G0): Unknown vendor-specific block f
[ 25.009] (II) modesetting(G0): AUO
[ 25.009] (II) modesetting(G0): B156XW02 V2
[ 25.009] (II) modesetting(G0): EDID (in hex):
[ 25.009] (II) modesetting(G0): 00ffffffffffff0006afec2200000000
[ 25.009] (II) modesetting(G0): 01130103802213780ac8959e57549226
[ 25.009] (II) modesetting(G0): 0f505400000001010101010101010101
[ 25.009] (II) modesetting(G0): 010101010101121b5642500026302018
[ 25.009] (II) modesetting(G0): 340058c1100000180000000f00000000
[ 25.009] (II) modesetting(G0): 00000000000000000020000000fe0041
[ 25.009] (II) modesetting(G0): 554f0a202020202020202020000000fe
[ 25.009] (II) modesetting(G0): 004231353658573032205632200a00c0
[ 25.009] (II) modesetting(G0): Printing probed modes for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 25.011] (II) modesetting(G0): EDID for output VGA-1-0
[ 25.011] (II) modesetting(G0): EDID for output HDMI-1-0
[ 25.011] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 25.011] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.011] (==) modesetting(G0): DPI set to (96, 96)
[ 25.011] (II) Loading sub module "fb"
[ 25.012] (II) LoadModule: "fb"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.012] (II) Module fb: vendor="X.Org Foundation"
[ 25.012] compiled for 1.15.1, module version = 1.0.0
[ 25.012] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.012] (II) Loading sub module "shadow"
[ 25.012] (II) LoadModule: "shadow"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 25.022] (II) Module shadow: vendor="X.Org Foundation"
[ 25.022] compiled for 1.15.1, module version = 1.1.0
[ 25.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.023] (--) Depth 24 pixmap format is 32 bpp
[ 25.033] (==) modesetting(G0): Backing store enabled
[ 25.033] (==) modesetting(G0): Silken mouse enabled
[ 25.033] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.034] (==) modesetting(G0): DPMS enabled
[ 25.334] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 25.334] (II) NVIDIA: access.
[ 25.553] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 25.627] Loading extension NV-GLX
[ 25.723] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.723] (==) NVIDIA(0): Backing store enabled
[ 25.723] (==) NVIDIA(0): Silken mouse enabled
[ 25.724] (==) NVIDIA(0): DPMS enabled
[ 25.724] Loading extension NV-CONTROL
[ 25.724] Loading extension XINERAMA
[ 25.724] (II) Loading sub module "dri2"
[ 25.724] (II) LoadModule: "dri2"
[ 25.724] (II) Module "dri2" already built-in
[ 25.724] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.724] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.725] (--) RandR disabled
[ 25.756] (II) Initializing extension GLX
[ 25.760] (II) modesetting(G0): Damage tracking initialized
[ 26.052] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.052] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.052] (II) LoadModule: "evdev"
[ 26.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.081] (II) Module evdev: vendor="X.Org Foundation"
[ 26.081] compiled for 1.15.0, module version = 2.8.2
[ 26.081] Module class: X.Org XInput Driver
[ 26.081] ABI class: X.Org XInput driver, version 20.0
[ 26.081] (II) Using input driver 'evdev' for 'Power Button'
[ 26.081] (**) Power Button: always reports core events
[ 26.081] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.081] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.081] (--) evdev: Power Button: Found keys
[ 26.081] (II) evdev: Power Button: Configuring as keyboard
[ 26.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 26.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.081] (**) Option "xkb_rules" "evdev"
[ 26.081] (**) Option "xkb_model" "pc104"
[ 26.081] (**) Option "xkb_layout" "us"
[ 26.136] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 26.136] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.136] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.136] (**) Video Bus: always reports core events
[ 26.136] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 26.136] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.136] (--) evdev: Video Bus: Found keys
[ 26.136] (II) evdev: Video Bus: Configuring as keyboard
[ 26.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 26.136] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.136] (**) Option "xkb_rules" "evdev"
[ 26.136] (**) Option "xkb_model" "pc104"
[ 26.136] (**) Option "xkb_layout" "us"
[ 26.137] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 26.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.137] (II) Using input driver 'evdev' for 'Power Button'
[ 26.137] (**) Power Button: always reports core events
[ 26.137] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 26.138] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.138] (--) evdev: Power Button: Found keys
[ 26.138] (II) evdev: Power Button: Configuring as keyboard
[ 26.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 26.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 26.138] (**) Option "xkb_rules" "evdev"
[ 26.138] (**) Option "xkb_model" "pc104"
[ 26.138] (**) Option "xkb_layout" "us"
[ 26.139] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 26.139] (II) No input driver specified, ignoring this device.
[ 26.139] (II) This device may have been added with another device file.
[ 26.139] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 26.139] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.139] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.140] (**) Sleep Button: always reports core events
[ 26.140] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 26.140] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.140] (--) evdev: Sleep Button: Found keys
[ 26.140] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 26.140] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.140] (**) Option "xkb_rules" "evdev"
[ 26.140] (**) Option "xkb_model" "pc104"
[ 26.140] (**) Option "xkb_layout" "us"
[ 26.141] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 26.141] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.141] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.141] (**) Video Bus: always reports core events
[ 26.141] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 26.141] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.141] (--) evdev: Video Bus: Found keys
[ 26.141] (II) evdev: Video Bus: Configuring as keyboard
[ 26.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 26.141] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 26.141] (**) Option "xkb_rules" "evdev"
[ 26.141] (**) Option "xkb_model" "pc104"
[ 26.141] (**) Option "xkb_layout" "us"
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 26.143] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event8)
[ 26.143] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.143] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 26.143] (**) 1.3M HD WebCam: always reports core events
[ 26.143] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event8"
[ 26.143] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 26.143] (--) evdev: 1.3M HD WebCam: Found keys
[ 26.143] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 26.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event8"
[ 26.143] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 26.143] (**) Option "xkb_rules" "evdev"
[ 26.143] (**) Option "xkb_model" "pc104"
[ 26.143] (**) Option "xkb_layout" "us"
[ 26.144] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 26.144] (II) No input driver specified, ignoring this device.
[ 26.144] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.145] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.146] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 26.146] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.147] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.147] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.147] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.147] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.147] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 26.147] (**) Option "xkb_rules" "evdev"
[ 26.147] (**) Option "xkb_model" "pc104"
[ 26.147] (**) Option "xkb_layout" "us"
[ 26.148] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.148] (II) LoadModule: "synaptics"
[ 26.148] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.158] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.158] compiled for 1.15.0, module version = 1.7.4
[ 26.158] Module class: X.Org XInput Driver
[ 26.158] ABI class: X.Org XInput driver, version 20.0
[ 26.158] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.158] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.158] (**) Option "Device" "/dev/input/event15"
[ 26.316] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.317] (**) Option "TapButton1" "1"
[ 26.317] (**) Option "TapButton2" "2"
[ 26.317] (**) Option "TapButton3" "3"
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.317] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.370] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
[ 26.370] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.371] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.371] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.371] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.372] (II) No input driver specified, ignoring this device.
[ 26.372] (II) This device may have been added with another device file.
[ 26.373] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[ 26.373] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.373] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 26.373] (**) Acer WMI hotkeys: always reports core events
[ 26.373] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 26.373] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 26.373] (--) evdev: Acer WMI hotkeys: Found keys
[ 26.373] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 26.373] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 26.373] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 26.373] (**) Option "xkb_rules" "evdev"
[ 26.373] (**) Option "xkb_model" "pc104"
[ 26.373] (**) Option "xkb_layout" "us"
[ 26.374] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[ 26.374] (II) No input driver specified, ignoring this device.
[ 26.374] (II) This device may have been added with another device file.
[ 26.375] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 26.375] (II) No input driver specified, ignoring this device.
[ 26.375] (II) This device may have been added with another device file.
[ 26.489] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.507] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27.186] (II) evdev: Acer WMI hotkeys: Close
[ 27.186] (II) UnloadModule: "evdev"
[ 27.187] (II) UnloadModule: "synaptics"
[ 27.187] (II) evdev: AT Translated Set 2 keyboard: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: 1.3M HD WebCam: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Sleep Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.254] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 27.404] (EE) Server terminated successfully (0). Closing log file.
It is still not working.
Last edited by hozturk0327 (2014-04-28 14:08:41)

[SOLVED] intel 855GM, Xorg 1.6.1 and black screen

Just installed Arch on my desktop and have the following problem:
I have generated x.conf.new using X -configure and that resulted in two Device sections for
cards - "0:2:0" and "0:2:1" Bus ID. With this configuration X refused to load with message
"Can not set Bus ID", buy either removing section with "0:2:1" completely or by just removing
"Bus ID" parameter I was able to start X, but it presents only black screen and hangs.
I have seen several issues like mine on this boards but neither has a solution to fix my problem:
1) I tried to switch to xf86-video-intel-legacy - same behavior
2) Tried to use i810 driver instead of intel - "no devices found"
3) Tried to start X without config file (only using hal) - just hangs badly, black screen and non responsive
4) Tried disabling autoconfiguration - black screen
5) Tried disabling DRI - black screen
6) Tried switching to XAA - black screen
7) Tried "ForceEnablePipeA "true" - black screen
8) Tried ignoring one of the monitors using "monitor-VGA", "monitor-LVDS" in device section - black screen
Anything else I can try? Video Adapter is Intel 82852/855GM at 00:02.0
Xorg log file with "ModeDebug" true
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 20:32:36 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB)
(II) intel(0): 0x00120000-0x0012ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000d6b8000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000b04c000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b08d000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000000b040000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000000d7fa000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Latest configuration file which still is not working
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
# Load "dri2"
# Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "Internal LCD"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "External VGA"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "Ignore" "True"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "False" # [<bool>]
Option "AccelMethod" "XAA"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
Option "monitor-VGA" "External VGA"
Option "monitor-LVDS" "Internal LCD"
Option "ModeDebug" "True"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Internal LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "External VGA"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by B0b (2009-05-10 21:07:56)

firecat53 wrote:
Try the xf86-intel-video-newest package from AUR.
Scott
Installed 2.7.0 from abs testing.. result is the same.. Unfortunately newest from AUR is not compiling complaining about some
macro stuff
Anything else?
This is log file with 2.7.0 module:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 23:54:58 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0002ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000b26d000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000e6c4000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b157000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000099bc000 physical
(II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x0000000006c1a000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295

[SOLVED] xf86-intel+xorg-1.5.3 low performance

Hello,
Yesterday i've updated whole arch linux distribution (pacman -Su), unfortunately after update i've discovered that pereformence of glx has fallen significantly.
On glxgears i can get max 170 fps, i can't event watch SD movies on mplayer -vo gl movie.avi, on mplayer i get this message:
**** Your system is too SLOW to play this! ****
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
But it's not problem with my computer, before system update everything was ok. So it's a problem with new intel driver or new xorg.
What are the possible solutions?
Last edited by czester21 (2008-12-26 15:50:11)

Yeah, I am looking forward to GEM. Hopefully that will solve all problems.
UPDATE:
It seems after I tried to compile Zen-Kernel 2.6.28-rc9 and added the following line in xorg.conf:
Section "Device"
Option "RenderAccel" "true"
EndSection
and
Section "Extensions"
Option "MIT-SHM" "Yes"
EndSection
And also change AccelMethod back to XAA instead of EXA as I ran before, performance went back to normal levels.
It might aswell work for you too.
Last edited by Cheesebaron (2008-12-25 15:38:23)

[SOLVED] XOrg fails to load Nvidia driver on startup

Hi,
I'm having a fairly strange issue where XOrg is failing to load my driver when I start up my laptop. I'm using kdm, but this is causing it to fail. However, doing a simple
$sudo systemctl restart kdm
works, and everything starts up fine. When kdm is in the failed state, I see this:
$sudo systemctl status kdm
● kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2014-12-19 18:47:26 EST; 41s ago
Main PID: 247 (kdm)
CGroup: /system.slice/kdm.service
└─247 /usr/bin/kdm -nodaemon
Dec 19 18:47:26 laptop systemd[1]: Started K Display Manager.
Dec 19 18:47:27 laptop kdm[247]: X server died during startup
Dec 19 18:47:27 laptop kdm[247]: X server for display :0 cannot be started, session disabled
And in my XOrg log, I see:
[ 3.639]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 3.639]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 3.639] X Protocol Version 11, Revision 0
[ 3.639] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 3.639] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 3.639] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 3.639] Build Date: 10 December 2014 02:34:24PM
[ 3.639]
[ 3.639] Current version of pixman: 0.32.6
[ 3.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.639] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:47:26 2014
[ 3.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.649] (==) No Layout section. Using the first Screen section.
[ 3.649] (==) No screen section available. Using defaults.
[ 3.649] (**) |-->Screen "Default Screen Section" (0)
[ 3.649] (**) | |-->Monitor "<default monitor>"
[ 3.650] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.650] (==) Automatically adding devices
[ 3.650] (==) Automatically enabling devices
[ 3.650] (==) Automatically adding GPU devices
[ 3.658] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.658] Entry deleted from font path.
[ 3.659] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.659] Entry deleted from font path.
[ 3.659] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.660] Entry deleted from font path.
[ 3.660] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.660] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.660] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.660] (II) Loader magic: 0x818d80
[ 3.660] (II) Module ABI versions:
[ 3.660] X.Org ANSI C Emulation: 0.4
[ 3.660] X.Org Video Driver: 18.0
[ 3.660] X.Org XInput driver : 21.0
[ 3.660] X.Org Server Extension : 8.0
[ 3.662] (EE) systemd-logind: failed to get session: PID 267 does not belong to any known session
[ 3.663] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.663] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.664] (II) LoadModule: "glx"
[ 3.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.767] (II) Module glx: vendor="NVIDIA Corporation"
[ 3.767] compiled for 4.0.2, module version = 1.0.0
[ 3.767] Module class: X.Org Server Extension
[ 3.768] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 3.769] (==) Matched nouveau as autoconfigured driver 0
[ 3.769] (==) Matched nv as autoconfigured driver 1
[ 3.769] (==) Matched modesetting as autoconfigured driver 2
[ 3.769] (==) Matched fbdev as autoconfigured driver 3
[ 3.769] (==) Matched vesa as autoconfigured driver 4
[ 3.769] (==) Assigned the driver to the xf86ConfigLayout
[ 3.769] (II) LoadModule: "nouveau"
[ 3.769] (WW) Warning, couldn't open module nouveau
[ 3.769] (II) UnloadModule: "nouveau"
[ 3.769] (II) Unloading nouveau
[ 3.769] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.769] (II) LoadModule: "nv"
[ 3.769] (WW) Warning, couldn't open module nv
[ 3.769] (II) UnloadModule: "nv"
[ 3.769] (II) Unloading nv
[ 3.769] (EE) Failed to load module "nv" (module does not exist, 0)
[ 3.769] (II) LoadModule: "modesetting"
[ 3.769] (WW) Warning, couldn't open module modesetting
[ 3.769] (II) UnloadModule: "modesetting"
[ 3.769] (II) Unloading modesetting
[ 3.769] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.769] (II) LoadModule: "fbdev"
[ 3.769] (WW) Warning, couldn't open module fbdev
[ 3.769] (II) UnloadModule: "fbdev"
[ 3.769] (II) Unloading fbdev
[ 3.769] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.769] (II) LoadModule: "vesa"
[ 3.770] (WW) Warning, couldn't open module vesa
[ 3.770] (II) UnloadModule: "vesa"
[ 3.770] (II) Unloading vesa
[ 3.770] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.770] (EE) No drivers available.
[ 3.770] (EE)
Fatal server error:
[ 3.770] (EE) no screens found(EE)
[ 3.770] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3.770] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3.770] (EE)
Which looks like it loads my nvidia driver, but then just decides not to use it for some reason... After I restart kdm, it seems to use the driver fine:
[ 78.897]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 78.897]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 78.897] X Protocol Version 11, Revision 0
[ 78.897] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 78.897] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 78.897] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 78.897] Build Date: 10 December 2014 02:34:24PM
[ 78.897]
[ 78.897] Current version of pixman: 0.32.6
[ 78.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:48:38 2014
[ 78.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.897] (==) No Layout section. Using the first Screen section.
[ 78.897] (==) No screen section available. Using defaults.
[ 78.897] (**) |-->Screen "Default Screen Section" (0)
[ 78.897] (**) | |-->Monitor "<default monitor>"
[ 78.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.898] (==) Automatically adding devices
[ 78.898] (==) Automatically enabling devices
[ 78.898] (==) Automatically adding GPU devices
[ 78.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 78.898] Entry deleted from font path.
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.898] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 78.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.898] (II) Loader magic: 0x818d80
[ 78.898] (II) Module ABI versions:
[ 78.898] X.Org ANSI C Emulation: 0.4
[ 78.898] X.Org Video Driver: 18.0
[ 78.898] X.Org XInput driver : 21.0
[ 78.898] X.Org Server Extension : 8.0
[ 78.900] (EE) systemd-logind: failed to get session: PID 542 does not belong to any known session
[ 78.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.901] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.901] (II) LoadModule: "glx"
[ 78.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.913] (II) Module glx: vendor="NVIDIA Corporation"
[ 78.913] compiled for 4.0.2, module version = 1.0.0
[ 78.913] Module class: X.Org Server Extension
[ 78.913] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
[ 78.914] (==) Matched nvidia as autoconfigured driver 0
[ 78.914] (==) Matched nouveau as autoconfigured driver 1
[ 78.914] (==) Matched nv as autoconfigured driver 2
[ 78.914] (==) Matched nouveau as autoconfigured driver 3
[ 78.914] (==) Matched nv as autoconfigured driver 4
[ 78.914] (==) Matched modesetting as autoconfigured driver 5
[ 78.914] (==) Matched fbdev as autoconfigured driver 6
[ 78.914] (==) Matched vesa as autoconfigured driver 7
[ 78.914] (==) Assigned the driver to the xf86ConfigLayout
[ 78.914] (II) LoadModule: "nvidia"
[ 78.914] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.920] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.920] compiled for 4.0.2, module version = 1.0.0
[ 78.920] Module class: X.Org Video Driver
[ 78.920] (II) LoadModule: "nouveau"
[ 78.921] (WW) Warning, couldn't open module nouveau
[ 78.921] (II) UnloadModule: "nouveau"
[ 78.921] (II) Unloading nouveau
[ 78.921] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.921] (II) LoadModule: "nv"
[ 78.921] (WW) Warning, couldn't open module nv
[ 78.921] (II) UnloadModule: "nv"
[ 78.921] (II) Unloading nv
[ 78.921] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.921] (II) LoadModule: "modesetting"
[ 78.921] (WW) Warning, couldn't open module modesetting
[ 78.921] (II) UnloadModule: "modesetting"
[ 78.921] (II) Unloading modesetting
[ 78.921] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 78.921] (II) LoadModule: "fbdev"
[ 78.922] (WW) Warning, couldn't open module fbdev
[ 78.922] (II) UnloadModule: "fbdev"
[ 78.922] (II) Unloading fbdev
[ 78.922] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.922] (II) LoadModule: "vesa"
[ 78.922] (WW) Warning, couldn't open module vesa
[ 78.922] (II) UnloadModule: "vesa"
[ 78.922] (II) Unloading vesa
[ 78.922] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.922] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 78.922] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.922] (++) using VT number 7
[ 78.935] (II) Loading sub module "fb"
[ 78.935] (II) LoadModule: "fb"
[ 78.935] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.936] (II) Module fb: vendor="X.Org Foundation"
[ 78.936] compiled for 1.16.2.901, module version = 1.0.0
[ 78.936] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.936] (II) Loading sub module "wfb"
[ 78.936] (II) LoadModule: "wfb"
[ 78.936] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.937] (II) Module wfb: vendor="X.Org Foundation"
[ 78.937] compiled for 1.16.2.901, module version = 1.0.0
[ 78.937] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.937] (II) Loading sub module "ramdac"
[ 78.937] (II) LoadModule: "ramdac"
[ 78.937] (II) Module "ramdac" already built-in
[ 78.939] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.939] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 78.939] (==) NVIDIA(0): RGB weight 888
[ 78.939] (==) NVIDIA(0): Default visual is TrueColor
[ 78.939] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 78.940] (**) NVIDIA(0): Enabling 2D acceleration
[ 79.610] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 79.610] (II) NVIDIA(0): 3D Vision stereo.
[ 79.610] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 79.612] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 79.612] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 79.612] (--) NVIDIA(0): VideoBIOS: 80.04.67.00.06
[ 79.612] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 79.616] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 79.616] (--) NVIDIA(0): DFP-2
[ 79.616] (--) NVIDIA(0): DFP-3
[ 79.616] (--) NVIDIA(0): DFP-4
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal LVDS
[ 79.616] (--) NVIDIA(GPU-0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 79.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 79.616] (**) NVIDIA(0): has been enabled on all display devices.)
[ 79.618] (==) NVIDIA(0):
[ 79.618] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 79.618] (==) NVIDIA(0): will be used as the requested mode.
[ 79.618] (==) NVIDIA(0):
[ 79.619] (II) NVIDIA(0): Validated MetaModes:
[ 79.619] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 79.619] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 80.144] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 80.144] (--) NVIDIA(0): option
[ 80.144] (--) Depth 24 pixmap format is 32 bpp
[ 80.144] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.144] (II) NVIDIA: access.
[ 80.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 80.150] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 80.150] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 80.150] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 80.150] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 80.150] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 80.150] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 80.150] (II) NVIDIA(0): Config Options in the README.
[ 80.155] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 80.532] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.532] (==) NVIDIA(0): Backing store enabled
[ 80.532] (==) NVIDIA(0): Silken mouse enabled
[ 80.533] (==) NVIDIA(0): DPMS enabled
[ 80.533] (II) Loading sub module "dri2"
[ 80.533] (II) LoadModule: "dri2"
[ 80.533] (II) Module "dri2" already built-in
[ 80.533] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.533] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.533] (--) RandR disabled
[ 80.539] (II) Initializing extension GLX
[ 80.605] (II) config/udev: Adding input device Power Button (/dev/input/event14)
[ 80.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.605] (II) LoadModule: "evdev"
[ 80.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.607] (II) Module evdev: vendor="X.Org Foundation"
[ 80.607] compiled for 1.16.2, module version = 2.9.1
[ 80.607] Module class: X.Org XInput Driver
[ 80.607] ABI class: X.Org XInput driver, version 21.0
[ 80.607] (II) Using input driver 'evdev' for 'Power Button'
[ 80.607] (**) Power Button: always reports core events
[ 80.607] (**) evdev: Power Button: Device: "/dev/input/event14"
[ 80.608] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.608] (--) evdev: Power Button: Found keys
[ 80.608] (II) evdev: Power Button: Configuring as keyboard
[ 80.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input18/event14"
[ 80.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.608] (**) Option "xkb_rules" "evdev"
[ 80.608] (**) Option "xkb_model" "pc104"
[ 80.608] (**) Option "xkb_layout" "us"
[ 80.635] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.635] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.635] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.635] (**) Video Bus: always reports core events
[ 80.635] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.635] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.635] (--) evdev: Video Bus: Found keys
[ 80.635] (II) evdev: Video Bus: Configuring as keyboard
[ 80.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input19/event15"
[ 80.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.635] (**) Option "xkb_rules" "evdev"
[ 80.635] (**) Option "xkb_model" "pc104"
[ 80.635] (**) Option "xkb_layout" "us"
[ 80.636] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 80.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.636] (II) Using input driver 'evdev' for 'Power Button'
[ 80.636] (**) Power Button: always reports core events
[ 80.636] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 80.636] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.636] (--) evdev: Power Button: Found keys
[ 80.636] (II) evdev: Power Button: Configuring as keyboard
[ 80.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input17/event13"
[ 80.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.636] (**) Option "xkb_rules" "evdev"
[ 80.636] (**) Option "xkb_model" "pc104"
[ 80.636] (**) Option "xkb_layout" "us"
[ 80.637] (II) config/udev: Adding input device Lid Switch (/dev/input/event11)
[ 80.637] (II) No input driver specified, ignoring this device.
[ 80.637] (II) This device may have been added with another device file.
[ 80.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event12)
[ 80.637] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.637] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.637] (**) Sleep Button: always reports core events
[ 80.637] (**) evdev: Sleep Button: Device: "/dev/input/event12"
[ 80.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.637] (--) evdev: Sleep Button: Found keys
[ 80.637] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16/event12"
[ 80.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.637] (**) Option "xkb_rules" "evdev"
[ 80.637] (**) Option "xkb_model" "pc104"
[ 80.637] (**) Option "xkb_layout" "us"
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.639] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event3)
[ 80.639] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 80.639] (**) LOGITECH G110 G-keys: always reports core events
[ 80.639] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event3"
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 80.639] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 80.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/0003:046D:C22B.0003/input/input7/event3"
[ 80.639] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 80.639] (**) Option "xkb_rules" "evdev"
[ 80.639] (**) Option "xkb_model" "pc104"
[ 80.639] (**) Option "xkb_layout" "us"
[ 80.639] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event4)
[ 80.639] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.639] (**) Gaming Keyboard G110: always reports core events
[ 80.639] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event4"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/0003:046D:C22A.0004/input/input8/event4"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.640] (**) Option "xkb_layout" "us"
[ 80.640] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event5)
[ 80.640] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.640] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.640] (**) Gaming Keyboard G110: always reports core events
[ 80.640] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event5"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.1/0003:046D:C22A.0005/input/input9/event5"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.641] (**) Option "xkb_layout" "us"
[ 80.641] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event1)
[ 80.641] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[ 80.641] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.641] (**) Razer Razer Lachesis: always reports core events
[ 80.641] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event1"
[ 80.641] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.641] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[ 80.641] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[ 80.641] (--) evdev: Razer Razer Lachesis: Found relative axes
[ 80.641] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[ 80.641] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[ 80.641] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[ 80.641] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[ 80.641] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:1532:000C.0001/input/input5/event1"
[ 80.641] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 13)
[ 80.642] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[ 80.642] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[ 80.642] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[ 80.642] (II) No input driver specified, ignoring this device.
[ 80.642] (II) This device may have been added with another device file.
[ 80.643] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[ 80.643] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[ 80.643] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.643] (**) Razer Razer Lachesis: always reports core events
[ 80.643] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[ 80.643] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.643] (--) evdev: Razer Razer Lachesis: Found keys
[ 80.643] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[ 80.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:1532:000C.0002/input/input6/event2"
[ 80.643] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 14)
[ 80.643] (**) Option "xkb_rules" "evdev"
[ 80.643] (**) Option "xkb_model" "pc104"
[ 80.643] (**) Option "xkb_layout" "us"
[ 80.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 80.643] (II) No input driver specified, ignoring this device.
[ 80.643] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 80.645] (II) No input driver specified, ignoring this device.
[ 80.645] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event17)
[ 80.645] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 80.645] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 80.645] (**) BisonCam, NB Pro: always reports core events
[ 80.645] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event17"
[ 80.645] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x512
[ 80.645] (--) evdev: BisonCam, NB Pro: Found keys
[ 80.645] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 80.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input23/event17"
[ 80.645] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 15)
[ 80.645] (**) Option "xkb_rules" "evdev"
[ 80.645] (**) Option "xkb_model" "pc104"
[ 80.645] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.646] (**) Option "xkb_rules" "evdev"
[ 80.646] (**) Option "xkb_model" "pc104"
[ 80.646] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 80.646] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 80.647] (II) LoadModule: "synaptics"
[ 80.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.647] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.647] compiled for 1.16.0, module version = 1.8.1
[ 80.647] Module class: X.Org XInput Driver
[ 80.647] ABI class: X.Org XInput driver, version 21.0
[ 80.647] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 80.647] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.647] (**) Option "Device" "/dev/input/event20"
[ 80.756] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4660 (res 47)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 80.757] (**) Option "TapButton1" "1"
[ 80.757] (**) Option "TapButton2" "2"
[ 80.757] (**) Option "TapButton3" "3"
[ 80.757] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input22/event20"
[ 80.810] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 80.810] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.811] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 80.811] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 80.811] (II) No input driver specified, ignoring this device.
[ 80.811] (II) This device may have been added with another device file.
[ 88.265] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.265] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.291] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: 1680x1050_60_0 @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 89.221] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 89.221] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 90.639] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 90.639] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93.745] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 93.745] (II) NVIDIA(GPU-0): 3D Vision stereo.
Notably, the following lines appear in the working case, but not the broken case:
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
Does anyone know what might be going on here?
Last edited by straemer (2014-12-20 13:03:58)

Hmmmm, that doesn't seem to be the issue. I have a nvidia geforce gtx 670mx. The nvidia website does link me to the 340xx driver for that card, but downgrading to that version still has the same issue. I suspect the issue is in Xorg, since it seems to load the module, but then decides it doesn't have a driver to run for some reason.

[SOLVED] Intel Fortran Compiler v11.1.072 installation failed

hi everyone!
i have some problems with the intel fortran installation. i try to install both ia32 and intel64 version, but without success. i launch from the shell the file "install.sh" and i follow the instructions on the screen, it says that i have missing optional pre-requisites, but also in other linux distribution such as ubuntu or debian, i always skip missing optional pre-requisites and go on. so i do that, but in the step no. 6 when the installation begins, there are a lot of errors:
Installing Intel(R) Fortran Compiler for applications running on IA-32
component...
Intel(R) Fortran Compiler for applications running on IA-32 component
installation failed.
Installing Intel(R) Math Kernel Library for applications running on IA-32
component...
Intel(R) Math Kernel Library for applications running on IA-32 component
installation failed.
what happens?
thanks all for your replies, i'm here for other infos if you want.
Last edited by zeruel85 (2010-06-28 07:56:26)

ok, i solved the problem, but with another ifort version. first of all, install these required packages:
sudo pacman -S glibc libstdc++5
then download from aur the package "intel-compilers-common 11.0.074-2" and extract it. now:
cd /PATH/intel-compilers-common
makepkg
sudo pacman -U intel-compilers-common-11.0.074-2-x86_64.pkg.tar.xz
always from aur, download "ifort" and extract it. before compiling it, copy the file "l_cprof_p_11.0.074_intel64.tgz" from the "intel-compilers-common" folder into the "ifort" folder. now we must have the license file. we can get it from the official intel site:
https://registrationcenter.intel.com/Re … NCOM&lang=
just insert your email, select your country and click "Continue". we'll receive an email with the license key attached. now copy the file into the "ifort" folder. open a shell and do this:
cd /PATH/ifort
md5sum LICENSE.lic
where "LICENSE.lic" is the name of your license key. after that, we have to modify the "PKGBUILD" file, always into the "ifort" folder. in line 19, write the correct license file name. in line 24 write the correct md5sum result. save and exit. now we can compile:
cd /PATH/ifort
makepkg
sudo pacman -U ifort-11.0.074-2-x86_64.pkg.tar.xz
now we have ifort installed! just logout/login to complete the installation! then type:
ifort -help
to verify if ifort was correctly installed. if the ifort guide appears, well done!

[Solved] Xorg fails when using Vmware.

I've recently ran into a problem with ArchLinux running as a guest in VMware,
I'd try load xorg and it would crash so I thought I'd install another version of ArchLinux in another machine.
All went well until I installed
xf86-video-vmware & svga-dri & open-vm-tools and added # MODULES = (... vmwgfx ...)
So I'm finding it hard to figure out if this is a common issue (I've googled around and couldn't find anything), or something to do with one of the packages I've installed.
Suggestions as to what I can do to fix this problem would be appreciated,
Thanks and have a nice day.
~Compulsed
[ 132.495]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 132.495] X Protocol Version 11, Revision 0
[ 132.495] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 132.495] Current Operating System: Linux NiggerVM 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:19:02 CET 2012 x86_64
[ 132.496] Kernel command line: root=/dev/disk/by-uuid/a9ad4c3b-f6b5-4cb3-9355-17eba48a92d7 ro
[ 132.496] Build Date: 05 March 2012 05:59:48AM
[ 132.496]
[ 132.496] Current version of pixman: 0.24.4
[ 132.497] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 132.497] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 132.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 18:40:19 2012
[ 132.539] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 132.565] (==) No Layout section. Using the first Screen section.
[ 132.565] (==) No screen section available. Using defaults.
[ 132.565] (**) |-->Screen "Default Screen Section" (0)
[ 132.565] (**) | |-->Monitor "<default monitor>"
[ 132.565] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 132.565] (==) Automatically adding devices
[ 132.565] (==) Automatically enabling devices
[ 132.584] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 132.584] Entry deleted from font path.
[ 132.584] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 132.584] Entry deleted from font path.
[ 132.585] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 132.585] Entry deleted from font path.
[ 132.585] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 132.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 132.590] Entry deleted from font path.
[ 132.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 132.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 132.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 132.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 132.591] (II) Loader magic: 0x7cef60
[ 132.591] (II) Module ABI versions:
[ 132.591] X.Org ANSI C Emulation: 0.4
[ 132.591] X.Org Video Driver: 12.0
[ 132.591] X.Org XInput driver : 16.0
[ 132.591] X.Org Server Extension : 6.0
[ 132.598] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768
[ 132.599] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 132.599] (II) LoadModule: "extmod"
[ 132.606] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 132.619] (II) Module extmod: vendor="X.Org Foundation"
[ 132.619] compiled for 1.12.0, module version = 1.0.0
[ 132.619] Module class: X.Org Server Extension
[ 132.619] ABI class: X.Org Server Extension, version 6.0
[ 132.619] (II) Loading extension MIT-SCREEN-SAVER
[ 132.619] (II) Loading extension XFree86-VidModeExtension
[ 132.619] (II) Loading extension XFree86-DGA
[ 132.619] (II) Loading extension DPMS
[ 132.619] (II) Loading extension XVideo
[ 132.619] (II) Loading extension XVideo-MotionCompensation
[ 132.619] (II) Loading extension X-Resource
[ 132.619] (II) LoadModule: "dbe"
[ 132.619] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 132.620] (II) Module dbe: vendor="X.Org Foundation"
[ 132.620] compiled for 1.12.0, module version = 1.0.0
[ 132.620] Module class: X.Org Server Extension
[ 132.620] ABI class: X.Org Server Extension, version 6.0
[ 132.620] (II) Loading extension DOUBLE-BUFFER
[ 132.620] (II) LoadModule: "glx"
[ 132.620] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 132.639] (II) Module glx: vendor="X.Org Foundation"
[ 132.639] compiled for 1.12.0, module version = 1.0.0
[ 132.640] ABI class: X.Org Server Extension, version 6.0
[ 132.640] (==) AIGLX enabled
[ 132.640] (II) Loading extension GLX
[ 132.640] (II) LoadModule: "record"
[ 132.640] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 132.640] (II) Module record: vendor="X.Org Foundation"
[ 132.640] compiled for 1.12.0, module version = 1.13.0
[ 132.640] Module class: X.Org Server Extension
[ 132.640] ABI class: X.Org Server Extension, version 6.0
[ 132.641] (II) Loading extension RECORD
[ 132.641] (II) LoadModule: "dri"
[ 132.641] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 132.659] (II) Module dri: vendor="X.Org Foundation"
[ 132.659] compiled for 1.12.0, module version = 1.0.0
[ 132.659] ABI class: X.Org Server Extension, version 6.0
[ 132.659] (II) Loading extension XFree86-DRI
[ 132.659] (II) LoadModule: "dri2"
[ 132.659] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 132.659] (II) Module dri2: vendor="X.Org Foundation"
[ 132.659] compiled for 1.12.0, module version = 1.2.0
[ 132.659] ABI class: X.Org Server Extension, version 6.0
[ 132.659] (II) Loading extension DRI2
[ 132.659] (==) Matched vmware as autoconfigured driver 0
[ 132.659] (==) Matched vesa as autoconfigured driver 1
[ 132.659] (==) Matched fbdev as autoconfigured driver 2
[ 132.659] (==) Assigned the driver to the xf86ConfigLayout
[ 132.659] (II) LoadModule: "vmware"
[ 132.659] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 132.928] (II) Module vmware: vendor="X.Org Foundation"
[ 132.928] compiled for 1.12.0, module version = 12.0.1
[ 132.928] Module class: X.Org Video Driver
[ 132.928] ABI class: X.Org Video Driver, version 12.0
[ 132.928] (II) LoadModule: "vesa"
[ 132.928] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 132.941] (II) Module vesa: vendor="X.Org Foundation"
[ 132.941] compiled for 1.11.99.903, module version = 2.3.0
[ 132.941] Module class: X.Org Video Driver
[ 132.941] ABI class: X.Org Video Driver, version 12.0
[ 132.941] (II) LoadModule: "fbdev"
[ 132.962] (WW) Warning, couldn't open module fbdev
[ 132.962] (II) UnloadModule: "fbdev"
[ 132.962] (II) Unloading fbdev
[ 132.962] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 132.962] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 132.962] (II) VESA: driver for VESA chipsets: vesa
[ 132.962] (--) using VT number 7
[ 133.004] (WW) Falling back to old probe method for vesa
[ 133.004] drmOpenDevice: node name is /dev/dri/card0
[ 133.020] drmOpenDevice: open result is 8, (OK)
[ 133.040] drmOpenByBusid: Searching for BusID PCI:0:15:0
[ 133.040] drmOpenDevice: node name is /dev/dri/card0
[ 133.051] drmOpenDevice: open result is 8, (OK)
[ 133.051] drmOpenByBusid: drmOpenMinor returns 8
[ 133.051] drmOpenByBusid: drmGetBusid reports pci:0000:00:0f.0
[ 133.051] (--) vmware(0): DRM driver version is 2.3.0
[ 133.051] (II) vmware(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 133.051] (EE) vmware(0): Device is not screen object capable.
[ 133.073] (WW) vmware(0): Disabling 3D support.
[ 133.073] (WW) vmware(0): Disabling Render Acceleration.
[ 133.073] (WW) vmware(0): Disabling RandR12+ support.
[ 133.073] (--) vmware(0): VMware SVGA regs at (0x10d0, 0x10d1)
[ 133.073] (II) Loading sub module "vgahw"
[ 133.073] (II) LoadModule: "vgahw"
[ 133.074] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 133.084] (II) Module vgahw: vendor="X.Org Foundation"
[ 133.084] compiled for 1.12.0, module version = 0.1.0
[ 133.084] ABI class: X.Org Video Driver, version 12.0
[ 133.084]
[ 133.084] Backtrace:
[ 133.084] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567da4]
[ 133.084] 1: /usr/bin/X (0x400000+0x16b8b9) [0x56b8b9]
[ 133.084] 2: /lib/libpthread.so.0 (0x7f1a580d3000+0xf270) [0x7f1a580e2270]
[ 133.084]
[ 133.084] Segmentation fault at address (nil)
[ 133.084]
Fatal server error:
[ 133.084] Caught signal 11 (Segmentation fault). Server aborting
[ 133.084]
[ 133.084]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 133.084] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 133.084]
[ 133.099] Server terminated with error (1). Closing log file.
Last edited by Compulsed (2012-03-22 08:18:12)

This may not be very helpful, but see https://bbs.archlinux.org/viewtopic.php?id=137733 and https://bugs.archlinux.org/task/28882 .

[solved] Intel D945GCLF2 Atom 330 motherboard + Xorg = crash on start

So today I went to the computer store and bought an Intel D945GCLF2 motherboard. I'm installing Arch on it but I'm stuck on getting Xorg to start. It uses the 945 series Intel integrated graphics so I installed xf86-video-intel. However, when I run "startx", it starts and displays twm, but the keyboard and mouse don't respond to input. But interestingly enough, I can still Alt-F1 (for example) out of console 7 and ^C to kill Xorg. So the system doesn't hardware lock, it's something to do with the drivers or Xorg.
I've been Googling this endlessly tonight and haven't found a solution yet. I've messed around with BIOS settings and xorg.conf flags ... nothing. Is there anything I should try at this point or should I file a bug report?
edit - it hardware locks on occassion too (no numlock light toggle on key press)
Last edited by synthead (2008-12-11 20:37:51)

I'm actually putting the computer in my car
http://bbs.archlinux.org/viewtopic.php?id=60661
But yeah, I got everything working fine on it. Networking, usb, video, audio, etc. all worked flawlessly without any work. I mean, it's all Intel-based stuff. The computer chugs right along too. Pretty damn powerful for what it is. I'm seriously considering buying a few more of these for a fileserver, mpd server for the house ... They're super cheap!

[SOLVED] Xorg: Failed to activate core devices?

Hey guys.
I must've done something terribly wrong, because my Arch Linux won't boot up anymore.
Here's the deal: When my computer is booted up, I type in "startxfce4", and it gives me a few errors such as:
XKB: Couldn't compile keymap
and most important
Fatal server error:
Failed to activate core devices.
So I googled around a little bit, and found something regarding the core devices, and it stated that it was caused by a full disc.
So I did df -h, and yes, I've got a 100% /dev/disk/by-uuid/alot-numbers-and-letters, but I do not recall having made such a partition.
Output from df -h:
udev 10m 192k 9.9m % /dev
/dev/disk/by-uuid/en-hel-masse-tal-og-bogstaver 7.3G 7.0G 0 100% /
shm 1.7g 0 100% /
/dev/sda1 99m 15m 80m 15% /boot
/dev/sda4 451G 44G 385G 11% /home
As you can see, there's a lot space left on /dev/sda4
So...
What has caused this, and why?
Regards,
Marcus.
Last edited by M_ller (2010-09-05 14:19:05)

Solved this with some help from another Linux community.
The reason was that I had a folder called scratchbox within / which was using ~2gb of space, so I deleted it, and the partition is only 70% full now.

[SOLVED] Bumblebee problems (Failed to assign any connected ...)

Hello everybody.
I'm having this exact issue: https://wiki.archlinux.org/index.php/Bu … X_screen_0.
Unfortunately, the provided solution does not help in my case.
I'm pretty much out of ideas now, so I'll post the configs and output of what I've got so far and hope for the best.
lspci: (seems strange that installing the nvidia drivers did not cause my gfx card - GeForce 880M GTX to be recognized as such)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. Device 1105
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1198 (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 1105
Kernel driver in use: nvidia
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:1:0:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "Device0"
# Option "ConnectedMonitor" "CRT"
EndSection
/etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
the error I'm getting while trying to run optirun glxgears -info:
[ 626.525385] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
[ 626.525442] [ERROR]Aborting because fallback start is disabled.
and my /etc/X11/xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "2880x1620"
EndSubSection
EndSection
I'm new to installing Arch so please take into consideration the possibility of outrageously stupid things I might have done to cause this mayhem.
Last edited by elkorn (2014-05-23 07:34:50)

I have actually had a success message among one of the error messages, which was:
Can't open display(null)
And meant that everything is in order but I just did not have X started.
I interpreted that incorrectly and tried to further fiddle with display configuration.
Marking as Solved.

[solved] System upgrade fails - catalyst-libgl related

I've been having trouble upgrading my system over the last few days. This is what I get:
sudo powerpill -f -Syyu
:: Synchronising package databases...
catalyst 1.5K 1163.9K/s 00:00:00 [------------------------------------------------------------------------------------------] 100%
core 35.5K 135.3K/s 00:00:00 [------------------------------------------------------------------------------------------] 100%
extra 451.3K 122.7K/s 00:00:04 [------------------------------------------------------------------------------------------] 100%
community 375.4K 123.0K/s 00:00:03 [------------------------------------------------------------------------------------------] 100%
:: Starting full system upgrade...
:: Replace kernel26-firmware with core/linux-firmware? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
:: xf86-input-acecad conflicts with xorg-server. Remove xorg-server? [Y/n] y
:: libgl conflicts with catalyst. Remove catalyst? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
:: lib32-catalyst-utils: requires catalyst>=10.5
If I try to remove lib32-catalyst-utils to do the upgrade, I get:
powerpill -R catalyst lib32-catalyst-utils
Password:
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: bin32-google-earth: requires lib32-libgl
:: lib32-mesa: requires lib32-libgl
:: mesa: requires libgl
:: mplayer: requires libgl
:: qt: requires libgl
:: stellarium: requires libgl
:: wxgtk: requires libgl
:: xorg-server: requires libgl
:: xorg-utils: requires libgl
Any thoughts?
Last edited by Henry Flower (2010-06-22 21:13:15)

Hmm. One problem solved, one to go. I'd missed the moving of the catalyst repo to the new address; updating the repo got me to
The following packages will be downloaded:
[catalyst]
catalyst-10.6-2 [16.10 MiB]
lib32-catalyst-utils-10.6-1 [7.13 MiB]
[extra]
boost-1.43.0-1 [6.97 MiB]
boost-libs-1.43.0-1 [2.23 MiB]
xorg-server-1.8.1.902-1 [1.82 MiB]
:: Number of Packages: 5
:: Total Download Size: 34.24 MiB
:: Total Installed Size: 243.51 MiB
:: Proceed with download? [Y/n] y
Unfortunately, then
:: Starting full system upgrade...
:: Replace kernel26-firmware with core/linux-firmware? [Y/n] y
resolving dependencies...
warning: dependency cycle detected:
warning: xorg-server will be installed before its catalyst dependency
looking for inter-conflicts...
warning: removing 'libgl' from target list because it conflicts with 'catalyst'
error: failed to prepare transaction (could not satisfy dependencies)
:: intel-dri: requires libgl=7.8.2
:: mach64-dri: requires libgl=7.8.2
:: mga-dri: requires libgl=7.8.2
:: r128-dri: requires libgl=7.8.2
:: savage-dri: requires libgl=7.8.2
:: sis-dri: requires libgl=7.8.2
:: tdfx-dri: requires libgl=7.8.2
I came across a similar problem with nvidia rather than catalyst: http://bbs.archlinux.org/viewtopic.php?id=99307 , but I don't know how to apply the solution there ('Uninstall the graphics drivers that you do not need') - are there any here that I don't need?
Last edited by Henry Flower (2010-06-22 20:25:43)

[SOLVED] Intel DRI does not work after update

Hi,
after update of kernel from 3.5.6 to 3.6.5 and intel driver and deletion of dri2proto and mesa via pacman -Qdt (there are no more dependencies).. acceleration is no longer working
$ export LIBGL_DEBUG=verbose; glxinfo | grep renderer
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: Can't open configuration file /etc/drirc: No such file or directory.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
Configuration:
SandyBridge I5, Intel HD 3000
Can somebody help?
Last edited by microcz (2012-11-07 06:15:23)

OT: A simpler way to check if some packages are installed:
$ pacman -Q intel-dri libgl foobar
intel-dri 9.0-1
libgl 9.0-1
error: package 'foobar' was not found
What's the output of 'groups'? Maybe you need to add yourself to 'video' group?
http://www.linuxquestions.org/questions … nf-794105/
http://www.mail-archive.com/dri-devel@l … 41313.html

Xorg Fails to Start (Catalyst 13.11 Beta)

Hello,
I have just installed the new catalyst 13.11 beta drivers. I blacklisted radeon, enabled nomodeset, and disabled kms. When I start X it gives me the "oh no something has gone wrong..." screen. Here is my X log
[ 778.047]
X.Org X Server 1.13.4
Release Date: 2013-04-17
[ 778.134] X Protocol Version 11, Revision 0
[ 778.163] Build Operating System: Linux 3.8.10-1-ARCH x86_64
[ 778.193] Current Operating System: Linux localhost 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64
[ 778.193] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/linux/drive0:root quiet nomodeset
[ 778.254] Build Date: 28 April 2013 01:19:17PM
[ 778.283]
[ 778.313] Current version of pixman: 0.30.2
[ 778.373] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 778.373] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 778.499] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Dec 18 18:41:36 2013
[ 778.532] (==) Using config file: "/etc/X11/xorg.conf"
[ 778.565] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 778.565] (==) ServerLayout "aticonfig Layout"
[ 778.565] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 778.565] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 778.565] (**) | |-->Device "aticonfig-Device[0]-0"
[ 778.565] (==) Automatically adding devices
[ 778.565] (==) Automatically enabling devices
[ 778.565] (==) Automatically adding GPU devices
[ 778.565] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 778.565] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 778.565] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 778.565] (II) Loader magic: 0x7fbc20
[ 778.565] (II) Module ABI versions:
[ 778.565] X.Org ANSI C Emulation: 0.4
[ 778.565] X.Org Video Driver: 13.1
[ 778.565] X.Org XInput driver : 18.0
[ 778.565] X.Org Server Extension : 7.0
[ 778.566] (--) PCI:*(0:1:0:0) 1002:683d:174b:e244 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/262144, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 778.599] Initializing built-in extension Generic Event Extension
[ 778.632] Initializing built-in extension SHAPE
[ 778.664] Initializing built-in extension MIT-SHM
[ 778.696] Initializing built-in extension XInputExtension
[ 778.728] Initializing built-in extension XTEST
[ 778.759] Initializing built-in extension BIG-REQUESTS
[ 778.789] Initializing built-in extension SYNC
[ 778.819] Initializing built-in extension XKEYBOARD
[ 778.848] Initializing built-in extension XC-MISC
[ 778.876] Initializing built-in extension SECURITY
[ 778.904] Initializing built-in extension XINERAMA
[ 778.930] Initializing built-in extension XFIXES
[ 778.957] Initializing built-in extension RENDER
[ 778.982] Initializing built-in extension RANDR
[ 779.006] Initializing built-in extension COMPOSITE
[ 779.030] Initializing built-in extension DAMAGE
[ 779.053] Initializing built-in extension MIT-SCREEN-SAVER
[ 779.076] Initializing built-in extension DOUBLE-BUFFER
[ 779.098] Initializing built-in extension RECORD
[ 779.120] Initializing built-in extension DPMS
[ 779.142] Initializing built-in extension X-Resource
[ 779.163] Initializing built-in extension XVideo
[ 779.185] Initializing built-in extension XVideo-MotionCompensation
[ 779.206] Initializing built-in extension XFree86-VidModeExtension
[ 779.227] Initializing built-in extension XFree86-DGA
[ 779.247] Initializing built-in extension XFree86-DRI
[ 779.267] Initializing built-in extension DRI2
[ 779.267] (II) "glx" will be loaded by default.
[ 779.267] (II) LoadModule: "glx"
[ 779.267] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 779.267] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 779.267] compiled for 6.9.0, module version = 1.0.0
[ 779.287] Loading extension GLX
[ 779.287] (II) LoadModule: "fglrx"
[ 779.287] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 779.300] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 779.300] compiled for 1.4.99.906, module version = 13.25.5
[ 779.300] Module class: X.Org Video Driver
[ 779.300] (II) Loading sub module "fglrxdrm"
[ 779.300] (II) LoadModule: "fglrxdrm"
[ 779.300] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 779.300] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 779.300] compiled for 1.4.99.906, module version = 13.25.5
[ 779.300] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[ 779.300] (II) AMD Proprietary Linux Driver Release Identifier: 13.251
[ 779.300] (II) AMD Proprietary Linux Driver Build Date: Dec 6 2013 15:19:03
[ 779.300] (++) using VT number 2
[ 779.300] (WW) Falling back to old probe method for fglrx
[ 779.332] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 779.336] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.336] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.339] (--) Chipset Supported AMD Graphics Processor (0x683D) found
[ 779.339] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 779.339] (II) fglrx(0): pEnt->device->identifier=0x228dcb0
[ 779.339] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 779.339] (II) Loading sub module "vgahw"
[ 779.340] (II) LoadModule: "vgahw"
[ 779.340] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 779.340] (II) Module vgahw: vendor="X.Org Foundation"
[ 779.340] compiled for 1.13.4, module version = 0.1.0
[ 779.340] ABI class: X.Org Video Driver, version 13.1
[ 779.341] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 779.341] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 779.341] (==) fglrx(0): Default visual is TrueColor
[ 779.341] (**) fglrx(0): Option "DPMS" "true"
[ 779.341] (==) fglrx(0): RGB weight 888
[ 779.341] (II) fglrx(0): Using 8 bits per RGB
[ 779.341] (==) fglrx(0): Buffer Tiling is ON
[ 779.341] (II) Loading sub module "fglrxdrm"
[ 779.341] (II) LoadModule: "fglrxdrm"
[ 779.341] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 779.341] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 779.341] compiled for 1.4.99.906, module version = 13.25.5
[ 779.343] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.343] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.343] (**) fglrx(0): NoAccel = NO
[ 779.343] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 779.343] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683d)
[ 779.343] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe244)
[ 779.343] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 779.343] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 779.343] (--) fglrx(0): MMIO registers at 0xf0200000
[ 779.343] (--) fglrx(0): I/O port at 0x00002000
[ 779.343] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 779.348] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 779.349] (II) Loading sub module "vbe"
[ 779.349] (II) LoadModule: "vbe"
[ 779.349] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 779.349] (II) Module vbe: vendor="X.Org Foundation"
[ 779.349] compiled for 1.13.4, module version = 1.1.0
[ 779.349] ABI class: X.Org Video Driver, version 13.1
[ 779.350] (II) fglrx(0): VESA BIOS detected
[ 779.350] (II) fglrx(0): VESA VBE Version 3.0
[ 779.350] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 779.350] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 779.350] (II) fglrx(0): VESA VBE OEM Software Rev: 15.23
[ 779.350] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 779.350] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 779.350] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 779.363] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 779.363] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 779.363] (II) fglrx(0): PCIE card detected
[ 779.364] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 779.364] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 779.364] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 779.364] (II) fglrx(0): RandR 1.2 support is enabled!
[ 779.364] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 779.364] (==) fglrx(0): Center Mode is disabled
[ 779.364] (II) Loading sub module "fb"
[ 779.364] (II) LoadModule: "fb"
[ 779.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 779.364] (II) Module fb: vendor="X.Org Foundation"
[ 779.364] compiled for 1.13.4, module version = 1.0.0
[ 779.364] ABI class: X.Org ANSI C Emulation, version 0.4
[ 779.364] (II) Loading sub module "ddc"
[ 779.364] (II) LoadModule: "ddc"
[ 779.364] (II) Module "ddc" already built-in
[ 779.440] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 779.440] (II) fglrx(0): Output DFP2 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP3 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP4 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP5 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP6 has no monitor section
[ 779.440] (II) fglrx(0): Output CRT1 has no monitor section
[ 779.440] (II) Loading sub module "ddc"
[ 779.440] (II) LoadModule: "ddc"
[ 779.440] (II) Module "ddc" already built-in
[ 779.440] (II) fglrx(0): Connected Display0: CRT1
[ 779.440] (II) fglrx(0): Display0 EDID data ---------------------------
[ 779.440] (II) fglrx(0): Manufacturer: VSC Model: 220 Serial#: 16843009
[ 779.440] (II) fglrx(0): Year: 2007 Week: 12
[ 779.440] (II) fglrx(0): EDID Version: 1.3
[ 779.440] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 779.440] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 779.440] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 779.440] (II) fglrx(0): Gamma: 2.20
[ 779.440] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 779.440] (II) fglrx(0): Default color space is primary color space
[ 779.440] (II) fglrx(0): First detailed timing is preferred mode
[ 779.440] (II) fglrx(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 779.440] (II) fglrx(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 779.440] (II) fglrx(0): Supported established timings:
[ 779.440] (II) fglrx(0): 720x400@70Hz
[ 779.440] (II) fglrx(0): 640x480@60Hz
[ 779.440] (II) fglrx(0): 640x480@67Hz
[ 779.440] (II) fglrx(0): 640x480@72Hz
[ 779.440] (II) fglrx(0): 640x480@75Hz
[ 779.440] (II) fglrx(0): 800x600@56Hz
[ 779.440] (II) fglrx(0): 800x600@60Hz
[ 779.440] (II) fglrx(0): 800x600@72Hz
[ 779.440] (II) fglrx(0): 800x600@75Hz
[ 779.440] (II) fglrx(0): 832x624@75Hz
[ 779.440] (II) fglrx(0): 1024x768@60Hz
[ 779.440] (II) fglrx(0): 1024x768@70Hz
[ 779.440] (II) fglrx(0): 1024x768@75Hz
[ 779.440] (II) fglrx(0): 1280x1024@75Hz
[ 779.440] (II) fglrx(0): 1152x864@75Hz
[ 779.440] (II) fglrx(0): Manufacturer's mask: 0
[ 779.440] (II) fglrx(0): Supported standard timings:
[ 779.440] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 779.440] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 779.440] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 779.440] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 779.440] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 779.440] (II) fglrx(0): Supported detailed timing:
[ 779.440] (II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 779.440] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 779.440] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 779.440] (II) fglrx(0): Serial No: QN9071271907
[ 779.440] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 779.440] (II) fglrx(0): Monitor name: VA1930wm-3
[ 779.440] (II) fglrx(0): EDID (in hex):
[ 779.440] (II) fglrx(0): 00ffffffffffff005a63200201010101
[ 779.440] (II) fglrx(0): 0c1101030e291a782ee5b5a355499927
[ 779.440] (II) fglrx(0): 135054bfef809500950f81808140714f
[ 779.440] (II) fglrx(0): 0101010101019a29a0d0518422305098
[ 779.440] (II) fglrx(0): 36009a001100001c000000ff00514e39
[ 779.440] (II) fglrx(0): 3037313237313930370a000000fd0032
[ 779.440] (II) fglrx(0): 4b1e520e000a202020202020000000fc
[ 779.440] (II) fglrx(0): 00564131393330776d2d330a20200028
[ 779.440] (II) fglrx(0): End of Display0 EDID data --------------------
[ 779.440] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 779.441] (II) fglrx(0): EDID for output DFP1
[ 779.441] (II) fglrx(0): EDID for output DFP2
[ 779.441] (II) fglrx(0): EDID for output DFP3
[ 779.441] (II) fglrx(0): EDID for output DFP4
[ 779.441] (II) fglrx(0): EDID for output DFP5
[ 779.441] (II) fglrx(0): EDID for output DFP6
[ 779.441] (II) fglrx(0): EDID for output CRT1
[ 779.441] (II) fglrx(0): Manufacturer: VSC Model: 220 Serial#: 16843009
[ 779.441] (II) fglrx(0): Year: 2007 Week: 12
[ 779.441] (II) fglrx(0): EDID Version: 1.3
[ 779.441] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 779.441] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 779.441] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 779.441] (II) fglrx(0): Gamma: 2.20
[ 779.441] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 779.441] (II) fglrx(0): Default color space is primary color space
[ 779.441] (II) fglrx(0): First detailed timing is preferred mode
[ 779.441] (II) fglrx(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 779.441] (II) fglrx(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 779.441] (II) fglrx(0): Supported established timings:
[ 779.441] (II) fglrx(0): 720x400@70Hz
[ 779.441] (II) fglrx(0): 640x480@60Hz
[ 779.441] (II) fglrx(0): 640x480@67Hz
[ 779.441] (II) fglrx(0): 640x480@72Hz
[ 779.441] (II) fglrx(0): 640x480@75Hz
[ 779.441] (II) fglrx(0): 800x600@56Hz
[ 779.441] (II) fglrx(0): 800x600@60Hz
[ 779.441] (II) fglrx(0): 800x600@72Hz
[ 779.441] (II) fglrx(0): 800x600@75Hz
[ 779.441] (II) fglrx(0): 832x624@75Hz
[ 779.441] (II) fglrx(0): 1024x768@60Hz
[ 779.441] (II) fglrx(0): 1024x768@70Hz
[ 779.441] (II) fglrx(0): 1024x768@75Hz
[ 779.441] (II) fglrx(0): 1280x1024@75Hz
[ 779.441] (II) fglrx(0): 1152x864@75Hz
[ 779.441] (II) fglrx(0): Manufacturer's mask: 0
[ 779.441] (II) fglrx(0): Supported standard timings:
[ 779.441] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 779.441] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 779.441] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 779.441] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 779.441] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 779.441] (II) fglrx(0): Supported detailed timing:
[ 779.441] (II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 779.441] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 779.441] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 779.441] (II) fglrx(0): Serial No: QN9071271907
[ 779.441] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 779.441] (II) fglrx(0): Monitor name: VA1930wm-3
[ 779.441] (II) fglrx(0): EDID (in hex):
[ 779.441] (II) fglrx(0): 00ffffffffffff005a63200201010101
[ 779.441] (II) fglrx(0): 0c1101030e291a782ee5b5a355499927
[ 779.441] (II) fglrx(0): 135054bfef809500950f81808140714f
[ 779.441] (II) fglrx(0): 0101010101019a29a0d0518422305098
[ 779.441] (II) fglrx(0): 36009a001100001c000000ff00514e39
[ 779.441] (II) fglrx(0): 3037313237313930370a000000fd0032
[ 779.441] (II) fglrx(0): 4b1e520e000a202020202020000000fc
[ 779.441] (II) fglrx(0): 00564131393330776d2d330a20200028
[ 779.441] (II) fglrx(0): Printing probed modes for output CRT1
[ 779.441] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 779.441] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1152x864"x60.0 106.50 1152 1520 1672 1904 864 903 909 934 -hsync +vsync (55.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 779.441] (II) fglrx(0): Output DFP1 disconnected
[ 779.441] (II) fglrx(0): Output DFP2 disconnected
[ 779.441] (II) fglrx(0): Output DFP3 disconnected
[ 779.441] (II) fglrx(0): Output DFP4 disconnected
[ 779.441] (II) fglrx(0): Output DFP5 disconnected
[ 779.441] (II) fglrx(0): Output DFP6 disconnected
[ 779.441] (II) fglrx(0): Output CRT1 connected
[ 779.441] (II) fglrx(0): Using exact sizes for initial modes
[ 779.441] (II) fglrx(0): Output CRT1 using initial mode 1440x900
[ 779.441] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 779.441] (II) fglrx(0): DPI set to (96, 96)
[ 779.441] (II) fglrx(0): Eyefinity capable adapter detected.
[ 779.441] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 779.441] (==) fglrx(0): PseudoColor visuals disabled
[ 779.441] (II) Loading sub module "ramdac"
[ 779.441] (II) LoadModule: "ramdac"
[ 779.441] (II) Module "ramdac" already built-in
[ 779.441] (==) fglrx(0): NoDRI = NO
[ 779.441] (==) fglrx(0): Capabilities: 0x00000000
[ 779.441] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 779.441] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 779.441] (==) fglrx(0): UseFastTLS=0
[ 779.441] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 779.441] (--) Depth 24 pixmap format is 32 bpp
[ 779.441] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 779.441] (WW) fglrx(0): ***********************************************************
[ 779.441] (WW) fglrx(0): * DRI initialization failed *
[ 779.441] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 779.441] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 779.441] (WW) fglrx(0): ***********************************************************
[ 779.441] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x10000000
[ 779.442] (II) fglrx(0): FBMM initialized for area (0,0)-(1472,8191)
[ 779.442] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1472,1440) (front color buffer - assumption)
[ 779.442] (II) fglrx(0): Largest offscreen area available: 1472 x 6751
[ 779.442] (==) fglrx(0): Backing store disabled
[ 779.442] Loading extension FGLRXEXTENSION
[ 779.442] (**) fglrx(0): DPMS enabled
[ 779.442] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 779.442] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 779.442] (II) LoadModule: "glesx"
[ 779.442] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 779.443] (II) Module glesx: vendor="X.Org Foundation"
[ 779.443] compiled for 1.4.99.906, module version = 1.0.0
[ 779.443] Loading extension GLESX
[ 779.443] (II) fglrx(0): GLESX enableFlags = 576
[ 779.443] (II) fglrx(0): Enable composite support successfully
[ 779.443] (WW) fglrx(0): Option "VendorName" is not used
[ 779.443] (WW) fglrx(0): Option "ModelName" is not used
[ 779.443] (==) fglrx(0): Silken mouse enabled
[ 779.443] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 779.443] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 779.556] (--) RandR disabled
[ 779.559] (II) AIGLX: Screen 0 is not DRI capable
[ 779.560] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 779.560] (II) fglrx(0): Setting screen physical size to 381 x 238
[ 779.668] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 779.668] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 779.668] (II) LoadModule: "evdev"
[ 779.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 779.669] (II) Module evdev: vendor="X.Org Foundation"
[ 779.669] compiled for 1.13.0, module version = 2.7.3
[ 779.669] Module class: X.Org XInput Driver
[ 779.669] ABI class: X.Org XInput driver, version 18.0
[ 779.669] (II) Using input driver 'evdev' for 'Power Button'
[ 779.669] (**) Power Button: always reports core events
[ 779.669] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 779.669] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 779.669] (--) evdev: Power Button: Found keys
[ 779.669] (II) evdev: Power Button: Configuring as keyboard
[ 779.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 779.669] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 779.669] (**) Option "xkb_rules" "evdev"
[ 779.669] (**) Option "xkb_model" "evdev"
[ 779.669] (**) Option "xkb_layout" "us"
[ 779.694] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 779.694] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 779.694] (II) Using input driver 'evdev' for 'Sleep Button'
[ 779.694] (**) Sleep Button: always reports core events
[ 779.694] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 779.694] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 779.694] (--) evdev: Sleep Button: Found keys
[ 779.694] (II) evdev: Sleep Button: Configuring as keyboard
[ 779.694] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 779.694] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 779.694] (**) Option "xkb_rules" "evdev"
[ 779.694] (**) Option "xkb_model" "evdev"
[ 779.694] (**) Option "xkb_layout" "us"
[ 779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 779.695] (II) No input driver specified, ignoring this device.
[ 779.695] (II) This device may have been added with another device file.
[ 779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 779.695] (II) No input driver specified, ignoring this device.
[ 779.695] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.697] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 779.697] (II) No input driver specified, ignoring this device.
[ 779.697] (II) This device may have been added with another device file.
[ 779.697] (II) config/udev: Adding input device UVC Camera (046d:081d) (/dev/input/event6)
[ 779.697] (**) UVC Camera (046d:081d): Applying InputClass "evdev keyboard catchall"
[ 779.697] (II) Using input driver 'evdev' for 'UVC Camera (046d:081d)'
[ 779.697] (**) UVC Camera (046d:081d): always reports core events
[ 779.697] (**) evdev: UVC Camera (046d:081d): Device: "/dev/input/event6"
[ 779.697] (--) evdev: UVC Camera (046d:081d): Vendor 0x46d Product 0x81d
[ 779.697] (--) evdev: UVC Camera (046d:081d): Found keys
[ 779.697] (II) evdev: UVC Camera (046d:081d): Configuring as keyboard
[ 779.697] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input6/event6"
[ 779.697] (II) XINPUT: Adding extended input device "UVC Camera (046d:081d)" (type: KEYBOARD, id 8)
[ 779.697] (**) Option "xkb_rules" "evdev"
[ 779.698] (**) Option "xkb_model" "evdev"
[ 779.698] (**) Option "xkb_layout" "us"
[ 779.698] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[ 779.698] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 779.698] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 779.698] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 779.698] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 779.699] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 779.699] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 779.699] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 779.700] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 779.700] (II) No input driver specified, ignoring this device.
[ 779.700] (II) This device may have been added with another device file.
[ 779.700] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event1)
[ 779.700] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 779.700] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 779.700] (**) BTC USB Multimedia Keyboard: always reports core events
[ 779.700] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event1"
[ 779.700] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[ 779.700] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[ 779.700] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[ 779.700] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1/event1"
[ 779.700] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[ 779.700] (**) Option "xkb_rules" "evdev"
[ 779.700] (**) Option "xkb_model" "evdev"
[ 779.700] (**) Option "xkb_layout" "us"
[ 779.701] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event2)
[ 779.701] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 779.701] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 779.701] (**) BTC USB Multimedia Keyboard: always reports core events
[ 779.701] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 779.701] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[ 779.701] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[ 779.701] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[ 779.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2/event2"
[ 779.701] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 779.701] (**) Option "xkb_rules" "evdev"
[ 779.701] (**) Option "xkb_model" "evdev"
[ 779.701] (**) Option "xkb_layout" "us"
[ 779.702] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 779.702] (II) No input driver specified, ignoring this device.
[ 779.702] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event10)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event11)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event12)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event13)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event8)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.704] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event9)
[ 779.704] (II) No input driver specified, ignoring this device.
[ 779.704] (II) This device may have been added with another device file.
[ 779.704] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 779.704] (II) No input driver specified, ignoring this device.
[ 779.704] (II) This device may have been added with another device file.
[ 779.706] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 808.793] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
Please Help,
I am very new to Arch
Last edited by jasonwryan (2013-12-20 18:46:10)

Steef435 wrote:If you got a kernel update it has to be rebuilt.
Pacman always automatically rebuilds the kernel after it is updated, all that is required is a reboot.
develop7 wrote:but now my internet connection doesn't work.
May I point you and quote you to this in a sticky which you should of read before posting:
iphitus wrote:
Don't do this
It doesnt work!!!
That is not output, that says absolutely nothing. It's probably the most useless thing you could post.
develop7 wrote:Ok, sorry I am a real n00b but I think I need to rebuild everything. How do I do this?
Arch is a system designed for the more competent user, if you are going to constantly ask for help every step of the way you may need to rethink which operating system you may be using.
Last edited by Kartious (2014-01-07 09:48:49)

[SOLVED]Intel Xorg Fail

Similar Messages

Maybe you are looking for