[SOLVED] iPod doesn't appear in /dev/ when plugged in

I've been trying to get my iPod touch to work, but I can't even find it inside /dev/. I'm supposed to be able to mount it manually if I see it as /dev/sdx# but I only see my hard drive's devices.
I know it is recognized by the system,
when I try lsusb, I get this line (among others):
Bus 001 Device 010: ID 05ac:1299 Apple, Inc.
also, with usb-devices I get the following:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  3
P:  Vendor=05ac ProdID=1299 Rev=00.01
S:  Manufacturer=Apple Inc.
S:  Product=iPod
S:  SerialNumber=2b032b9c4f73f37786c4fb2cf3a0e15bc75a0331
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
I don't know if  the <<Driver=(none)>> part is normal here, I can mount/automount whatever other usb devices, like usb flash, or external hdd's, but not the iPod.
Any help would be very much appreciated
Last edited by KBM (2010-07-10 06:29:06)

hey guys. I know this thread was "solved", but it didn't solve my problems.
I also got my ipod touch mounted using ifuse and was able to use gtkpod to transfer my files. However, since all of my files ended in .mp3, and the ipod didn't strip the extensions off, I decided to clear them from the ipod and start again.
In the middle of a sync I forgot about it, unplugged the ipod, and now ifuse gives me the message:
No device found, is it connected?
If it is make sure that your user has permissions to access the raw usb device.
If you're still having issues try unplugging the device and reconnecting it.
whenever I try to mount it.
I did the view-the-log thing, and when I plug it in I get this:
Oct 11 08:00:10 localhost usbmuxd[22304]: [2] Could not open device 1-4: -3
So it seems to be a problem with usbmuxd. Any ideas guys?
One more thing, I think I may have accidentally deleted some files from the ipod ("HashTable" comes to mind...), but I did a software update. Would that rebuild the filesystem?
Thanks.

Similar Messages

  • My ipod doesn't appear on itunes when plugged in my computer?

    My Ipod touch 4g doesn't appear on itunes when plugged in my computer. It doesn't charge on my computer and I can't use itunes with my computer and my ipod. What would be solutions for this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.

  • IPod doesn't appear in iTunes and Windows

    I have a next problem with connecting nano with Windows:
    iPod doesn't appear in iTunes: iTunes 7 diagnostic write that host-controller of bus IEEE 1394 was not found.
    Sometimes Windows see the demountable disk, but can't open it. Occasionally, when i charge nano, iTunes gives out the message, that iPod is damaged.
    After connecting iPod to the computer, it shows the "Do not disconnect" screen, which not disappear after nano disconnecting. And I need reset iPod everytime after charging.
    Does any help me?

    I read this article.
    I can't restore iPod because iPod Updater can't recognize it, when one connect to the computer.
    How to solve the problem: as i wrote, iTunes diagnostic informs that can't find the controller IEEE 1394 (WiFi), but I HAVEN'T WiFi card on computer, I use USB 2.0.

  • I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

    I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
    Thank you

    So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

  • My ipod doesn't receive de messages when it's closed

    My ipod doesn't receive de messages when it's closed so is a problem with my ipod or internet

    Try a reset ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • My iPod doesn't appear on the iTunes source List!! Help!!

    I'm havin' a problem with my iPod, doesn't appear on the iTunes source list. And I have to update the iPod software cause I need to fix a problem: my iPod seems to be empty when turn it on but in the iPod's hard disk still the mp3 files, I already made a backup of this mp3 files. I know I have to restore my iPod to fix the problem, but I can't do it , cuz it doesn't appear on the source list. Can anyone please help me with these problem? Thanks!!

    I've checked a few help pages that I've seen other people post that appeared to be of some relevance to my problem but still nothing. Can anybody out there provide any help?

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

  • External hard drive doesn't appear in /dev/sd*

    My 7 month old external hard drive (http://www.newegg.com/Product/Product.a … 6822136471) doesn't seem to work anymore. It doesn't appear in /dev/sd* nor 'sudo lsusb'. It used to work fine. I've tried multiple usb ports, multiple computers, and multiple OS (linux and windows). Any ideas what I could try next? Are there any tools to diagnose the problem further?
    My last resort options are
    1) take the drive apart and plug it into a desktop computer (probably invalidates warranty)
    2) pay for data recovery (it's a personal hard drive. i'm not sure if this is overkill or expensive)
    Any advice?

    Using a data recovery service might get a little expensive, it all depends on how important the data is and how much it will cost you to generate it again or replace it.
    If the recovery job is simple as in just taking the disk out of the enclosure and copying the data to another disk then I guess it might not be too expensive. Some data recovery companies do provide a (free?) quote on how much it will cost you and others even state how much the more common data recovery tasks cost. If the data recovery company has an agreement with the disk manufacturer then the warranty will not be void and you can claim it and get a new disk.
    If you plan to do it yourself be ready to make a full disk image and then copy your data out of the image (look into ddrescue and sparse disk images, works wonder if the disk is not too full), you don't know the cause of the controller failure and it might be that the hard disk is not in good shape too and will only live long enough to reliably extract all the data or do a full disk image a couple of times.

  • Hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

    hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

    Go to
    http://bt.custhelp.com/app/answers/detail/a_id/47531
    and follow the instructions
    This was put up by BT several months ago as part of the advance notification that the Yahoo service through them was closing

  • HT201401 screen completely black, appears on itunes when plugged, powered down but no logo

    screen completely black, appears on itunes when plugged, powered down but no logo

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • My iPod doesn't appear on my desktop or in my iTunes when connected

    I have a 10GB iPod which I brought autumn 2003.
    I recently removed all of my music from my iPod so that I could update them properly. Now when I try to connect my iPod to do this it doesn't appear on my desktop or in my iTunes. Not even the 'do not disconnect' message appears. It just seems to think that it is connected to the power adaptor and shows that it is charging, first just on the small power sign located at the top right hand corner of its screen, and then the full charging screen.
    I am using the Firewire cable that came with the iPod.
    The 5 R's suggested on the support web-page don't work. I can't restore my iPod to factory settings as the updater requires for my iPod to be connected, which it is not regestering. The problem in the first place!!
    Any suggestions?
    Please, please, please... I'm loosing faith.
    iBook G4   Mac OS X (10.3.9)  

    Unfortunately, as my computer isn't recognising my iPod as anything, I can't do these things you suggested on my computer.
    I tried it on a friends, using my cable, and that all worked -which suggests it's a problem with my computer? But getting home it was all the same as before.
    I just removed all iTunes and iPod everythings off my computer and re-installed them using the original disc. I installed iTunes first, and then the iPod, and that worked, it connected and I restored my iPod to factory settings.
    I had to disconnect my iPod to use the port for my external hardrive, to upload all of my music again. and now that all the music is there and I have something to put onto my iPod, the bloody computers not recognising it again!
    Any other ideas?

  • IPod doesn't appear in the finder nor on the desktop when connected

    Hi,
    My iPod touch 2nd gen doesn't appear in the finder nor on the desktop when connected, is it normal maybe because its a flash drive and not a harddrive, I don't know...
    By the way, everything is normal with iPhoto and iTunes.
    Sincerely

    The Touch and iPhone do not have disk mode, that is why you can't see it.

  • Ipod doesn't appear in itunes or on desktop - trouble transfering music

    When connecting Ipod, it doesn't appear in itunes or on desktop (Windows). Attempted to fix.
    Reinstalled itunes and ipod, also upgraded itunes - no success in fixing.
    Restored ipod (through computer)- no success in fixing - and of course, lost all songs in ipod.
    Now, ipod sometimes appears in itunes, sometimes doesn't.
    I've had a little success transfering songs (albeit, inconsistently) back to ipod from itunes, but sporadically.
    Itunes is working fine when playing songs on computer;
    Ipod working fine when playing songs on ipod. It's difficult transferring songs back to ipod. I checked cable and port with other equipment. Cable and port appear to be working. When clicking on Safely Remove Hardware, computer identifies ipod as "drive 0." I need help on how to get my ipod to appear in itunes again and fix the transfering problem?

    HI there, Welcome to Apple discussions
    Try this page and come back if you still have issues. Book mark it as well, as you may need it again in the future.
    http://www.apple.com/support/ipod/index.html
    http://docs.info.apple.com/article.html?artnum=93976

  • IPod doesn't appear in iTunes

    My iPod Touch doesn't appear in ITunes, so of course I can't sync it.
    Now, my iPod nano syncs just fine with the same cable and USB connection, so the problem must be with the iPod touch. 
    When I plug it in, I get that little "chirp" and the battery indicator appears on the screen, but that's it.
    Any ideas what's going on?   What should I do?

    Try here. The iPod touch (and iPhone and iPad) use different drivers than the Nano.
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • SmartForm Last Page to be printed in Duplex mode

    I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode. Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page. My sma

  • BAPI_PO_CHANGE - error while locking PO iems

    All, We're getting error when trying to lock PO items using BAPI_PO_CHANGE. The PO item has a closed order as the account assignment in the PO. We do not get the error if the order is open. Has anybody encountered this problem before? Is there any wa

  • Gray lines (masks)

    I'm getting frustrated with this issue.  My client shows me gray lines that I thought corresponded with mask lines in my frame.  I see the lines on his PC, but I can't see anything on my monitors, not in FCP, Quicktime, external monitors, and I've go

  • Will Family base allow me to see content of text messages?

    will Family base allow me to see content of text messages? can app be put on my childs phone without them knowing?

  • M-bdoc is still running but is ok!!!!

    hi all, i made a m-bdoc to transfer a record from BUT000 R/3 to BUT000 CRM; i found the new record on BUT000CRM, and the transaction SMW01 says that the process is ok, but on the transaction R3AM1 i read that the bdoc is still running...from yesterda