[solved-ish] banshee problem with daps

I'm having a problem with Banshee. I have an Ipod shuffle and a cowon 7. Both devices are detected and mounted by gnome just fine, but banshee doesn't see them. I get the following output from banshee:
Debug: [10/14/2007 12:53:34 PM] (Testing device for DAP support) - /org/freedesktop/Hal/devices/volume_uuid_601B_149F
Debug: [10/14/2007 12:53:34 PM] (DAP has not been added) - /org/freedesktop/Hal/devices/volume_uuid_601B_149F
Anyone else have trouble with this?
Last edited by jason_f (2007-10-20 18:15:26)

The iaudio 7 isn't in the HAL db yet, so adding the .is_audio_player file worked.  For the shuffle it looks like there are problems with that and banshee.

Similar Messages

  • How to solve a serious problem with the Battary of my T500 laptop ?

    Hi Forum,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
    - 39T6651 SBB 9 CELL LI-ION BATTERY
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
    - 2 GB Intel Turbo Memory hard drive cache.
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    - Windows 7 Ultimate with the latest Service Pack (x64).
    My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
    Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
    Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
    Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
    What do you think should I do? Could you please provide me any useful tips to resolve this problem?
    I would greatly and sincerely appreciate all your inputs !
    Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
    Solved!
    Go to Solution.

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • Need to solve serious security problem with Oracle Reports URL

    As mentioned repeatedly on this forum, Oracle Reports allows serious security breaches that allow users to see reports that they did not generate -- it's easy to guess a legal URL by changing the getjobid parameter.
    I've reviewed the JavaDocs to part of the rwrun.jar file and reviewed some of the example report plugins. This shows promise in helping to solve this security problem but critical pieces are missing.
    1) The javadocs are accurate for only 10g (9.0.4) but not correct for 10g (10.1.2+), which we are currently using. I need access to the updated version of this javadoc.
    2) Even with the updated version of the JavaDoc, I haven't found a class from which to inherit that would give me the opportunity to generate random jobid values, which then would effectively prevent users from guessing other jobid values, and thereby gaining access to other's reports (which in our cases, may contain sensitive information.
    3) We have found that we can send the parameter=value of EXPIRATION=1 which helps protect such information, but this requires that every program which invokes a report be modified to add this parameter. It would be far better for the report server to be configured to use a java class we write that inherits from some rwrun.jar class that would by default, add the EXPIRATION=1 parameter.

    Hi,
    Thanks for our replies. I will ask to an administrator about this security problem, now I know it depends of a security parameter.
    But I would know if it could be possible to hide the technical name of the query in the url. It could improve the security level of our reports in a first time in this way.
    Thanks a lot,
    JW.

  • How to solve the setColor() problem with multithreading?

    My fractal program uses a custom number of threads to draw the complete image. If I use just 1 thread, the image looks clean, if I use more threads some pixels of the image gets other colors. The problem ist the painting code:
    g2d.setColor(col);
    g2d.drawLine(x, y, x, y);as it is necessary to first set the color of the graphics object and then draw the line. I can solve this pixel color problem by synchronizing the Graphics2D object:
    synchronized (g2d) {
      g2d.setColor(col);
      g2d.drawLine(x, y, x, y);
    }but this slows the code down to times where just 1 thread is calculating the image. Unfortunately, I can't find a draw() method that has a color parameter.
    I tried to divide the panel into multiple BufferedImages (1 for each thread) which solves the pixel problem but only the first BufferedImage get's drawn.

    I solved my problem now. My solution is to use a separate BufferedImage for each Thread. I still had a bug where i didn't transformed the x/y coordinates of the complete image to the shifted x/y coordinates of the single BufferedImages, so that the threads draw the image out of the visible area which looked like all threads after the first only had a black image. After adjusting teh coordinates, the fractal now gets drawn correctly. And boy it's much faster with multiple threads - even on single core systems. On a dual core system, using 10-20 threads about doubles the performance as both cores have work almost all the time until the fractal is finished. :-)

  • When will Apple solve all the problems with Yosemite

    I have problems with Wifi, Mail ,Safari, computer waking up and resuming activity etc...

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Mail Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer
    What are the problems you are having?

  • Solved: InDesign CC: Problems with text in text box: text flows around invisible object

    I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
    The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
    When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
    I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
    If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
    Solution:
    There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

    Arthur, Garry
    Would be great if you could send the files as attachment in an email to [email protected]
    Else, you may post here using these steps: http://forums.adobe.com/message/3994281
    Thanks!
    - Neeraj

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • [Solved] Multimonitor compositioning problem with rotated screen

    Hello,
    I have problem with picture compositioning on screen, problem is best described on video, if I rotate second screen situation is same, but roles are flipped.
    https://drive.google.com/file/d/0B0dkWJ … sp=sharing
    My setup:
    Acer 3820tg with Arch stable, catalyst-total from AUR and i3 wm:
    ATI 5650 - only discrete vga
    VGA output: 1280x1024 rotated to left
    HDMI out: 1680x1050
    nomodeset not in kernel line
    I tried both(gpu and display) image scaling
    $ glxinfo
    name of display: :0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: ATI
    server glx version string: 1.4
    $ fglrxinfo
    display: :0 screen: 0
    OpenGL vendor string: Advanced Micro Devices, Inc.
    OpenGL renderer string: AMD Mobility Radeon HD 5000 Series
    OpenGL version string: 4.4.12874 Compatibility Profile Context 12.104
    Thanks for help.
    Jakub
    Last edited by kubco2 (2014-07-03 18:21:21)

    Out of the box, the fonts will suck.
    Go through the following wiki https://wiki.archlinux.org/index.php/Font_configuration and configure your fonts. You also need to make sure you have a couple good fonts installed. Then setup the hinting, filter etc and it will be much improved.
    I have used Infinality in the past and it works very well as well but made too many changes, one of which resulted in an issue with an app that was difficult to track down. Haven't used it lately so do not know the status.

  • Can anyone help me solve a krypto problem with iterators?

    anyone can help me I am desperately trying to write a method takes a target and an array of non-zero values, and returns true if there is a Krypto solution.
    A krypto solution is one that you are given a set of non-zero int values and an int target.
    Your goal is to form an arithmetic expression using those numbers (in any order) and the operators +, -, *, /, or %.
    You must use each value exactly once, though you can use operators any number of times.
    this is the start of the test method I have to work with:
    public static void testSolveKrypto() {
    // 1 + 2 * 3 + 4 = 13, among others
    verify(solveKrypto(13,new int[]{1,2,3,4}));
    // 1 + 3 * 4 - 2 = 14, among others
    verify(solveKrypto(14,new int[]{1,2,3,4}));
    // No solution for 29:
    verify(!solveKrypto(29,new int[]{1,2,3,4}));
    // harder problems with solutions
    verify(solveKrypto(80,new int[]{2, 6, 7, 8}));
    verify(solveKrypto(-59, new int[]{4, 6, 8, 9, 10}));
    verify(solveKrypto(-1240,new int[]{5, 6, 7, 15, 16, 19}));
    verify(solveKrypto(145927, new int[]{5, 21, 22, 77, 81, 89, 94}));
    // harder problems without solutions
    // interesting aside: in each case, the given target is the first positive
    // target which is not solvable for the given set of numbers!
    verify(!solveKrypto(33,new int[]{2, 6, 7, 8}));
    verify(!solveKrypto(131, new int[]{4, 6, 8, 9, 10}));
    verify(!solveKrypto(949,new int[]{5, 6, 7, 15, 16, 19}));
    verify(!solveKrypto(10486, new int[]{5, 21, 22, 77, 81, 89, 94}));
    if anyone can help or get me started that would greatly be appreciated

    h1. {color:red}CROSS-POST{color}
    [http://forum.java.sun.com/thread.jspa?messageID=10174551]

  • [SOLVED][GRUB]Install problem with the new method

    Hi,
    it is not my first install of Arch Linux but I have a problem with this new kind of installation method, especially with GRUB.
    Here is my hard drives configuration :
    /dev/sda1 -> SSD 120 GB ntfs (windows)
    /dev/sdb1 -> HD 1 TB ext4 (data)
    /dev/sdc :
    /dev/sdc1 -> ext2 /boot
    /dev/sdc2 -> swap
    /dev/sdc3 -> ext4 /
    /dev/sdc5 -> ext4 /home
    During the installation, I installed grub (with grub-install) in /dev/sdc. I assumed it was the correct drive to install it but apparently not, Windows starts automatically and I don't have the grub menu.
    Should I install my system again or is there a way to boot on the livecd and install it ?
    Should I :
    1) mount /dev/sdc3 in /mnt then /dev/sdc1 in /mnt/boot and finally /dev/sdc5 in /mnt/home
    2) pacstrap /mnt grub-bios
    3) arch-chroot
    4) grub-install
    Thank you.
    Last edited by hiveNzin0 (2012-09-12 06:15:15)

    DSpider wrote:
    If you set whatever drive "/dev/sdc" is (brand and model) to boot first in the BIOS, all you need to do is install a bootloader on Arch. You don't even need a separate boot partition. It will use the /boot folder on root partition. Then install os-prober (if you don't already have this installed) and re-generate the .cfg.
    https://wiki.archlinux.org/index.php/Be … bootloader
    The problem is that I cannot select another hard drive. The only one available for the boot order is the Samsung 830 series (/dev/sda with Windows).
    The other options are the CD drive and removable disk.
    I checked that this morning, maybe I was too tired. I will check again this evening.
    But if I am right and I cannot select my intel SSD (containing my arch setup) for the boot order, would the solution I described work ? I don't see why not but my knowledge are basic in Linux.
    Thank you again for your help.

  • [SOLVED] systemd switch, problems with slim/bootup

    My system will boot, giving me "OK" for everything it's doing. Then my system gives me a tty login prompt, but continues booting:
    gestalt login: [ OK ] Starting Wicd.
    [ OK ] Reached target multi-user.
    [ OK ] Reached target graphical interface.
    So if i just hit enter, it gives me another login prompt, then I can login, but X/fluxbox isn't started or anything.
    My ~/.xinitrc:
    exec startfluxbox
    xset +fp /usr/share/fonts/local
    xset fp rehash
    systemctl list-units --type=target
    UNIT LOAD ACTIVE SUB JOB DESCRIPTION
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target masked active active graphical.target
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    network.target loaded active active Network
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    syslog.target loaded active active Syslog
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    JOB = Pending job for the unit.
    14 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    Graphical target isn't masked, like I thought it would be after reading this
    systemctl status slim.service gives me:
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: failed (Result: exit-code) since Mon, 2012-11-26
    Process: 305 ExecStart=urs/bin/slim -nodaemon(code=exited, status =1/FAILURE)
    CGroup: name=systemd:/system/slim.service
    systemd-analyze blame gives (just going to ignore the times)
    wicd.service
    systemd-vconsole-setup.service
    systemd-binfmt.service
    systemd-logind.service
    systemd-modules-load.service
    dev-hugepages.mount
    systemd-udev-trigger.service
    dev-mqueue.mount
    systemd-udevd.service
    proc-sys-fs-binfmt_service.mount
    console-kit-daemon.service
    polkit.service
    systemd-tmpfiles-setup.service
    home.mount
    systemd-sysctl.service
    tmp.mount
    systemd-user-sesssions.service
    systemd-remount-fs.service
    slim isn't even on this list.
    systemctl --failed
    UNIT LOAD ACTIVE SUB JOB DESCRIPTION
    slim.service loaded failed failed SLiM Simple Login Manager
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    JOB = Pending job for the unit.
    4 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    Hopefully this isn't too much information (or completely irrelevant) for what might be a far simpler problem, but I'm just not sure what's going on. It might be worth noting that I only bothered to start switching to systemd today when I had to reboot and slim wouldn't start/get me into my WM(!) This is interesting to me, since I read (somewhere) that as of slim's last version, it would only work with systemd and not consolekit... but when I try:
    pacman -Qi slim
    It tells me that the last time I last updated/installed slim was November 5 of this year. Any ideas?
    EDIT:
    Latest nVidia drivers weren't working with my 7xxx integrated GPU. Downgrade to 304xx drivers or use nouveau.
    Last edited by brokengestalt (2012-11-28 17:41:50)

    I tried starting X manually (typing in "startx" at the prompt, and I get the following errors:
    modprobe: ERROR: could not insert 'nvidia': No such device
    Fatal server error:
    no screens found
    (EE)
    Server terminated with error (1). Closing log file.
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    It looks like I'm just having problems with my video card, but I have the proprietary nVidia drivers installed and X installed. The systemd wiki page mentions no changes that I would need to make to my xorg or nvidia configuration...

  • Is there any way to solve the wifi problem with lion?

    Since upgrading to lion my iMac has been having severe problems connecting to my wifi router. As long as it doesn't go to sleep it is fine, but if it does then I have to restart the computer to connect to the router. I know that it is lion as I've got 2 iphones, 2 ipads, and 2 laptops in the house all operating without problems. Please any help would be greatly appreciated. I tried contacting apple and they won't help me unless I pay them, or sign up for apple care. I already paid for the **** computer and the OS why would I pay them to address an issue that is clearly on their end when my computer is still under warranty?

    There's a number of things you can do to try to diagnose the problem, and hopefully it doesn't have to do with a hardware problem.
    I think the number one reason people are having problems with Lion is because most of the installations are UPGRADES, not CLEAN installs. While it's much less of a hassle for an upgrade rather than a clean install, weird and random problems can arise from an upgrade to an OS.
    Another reason is the fact that this is a dot zero release, meaning it's version 10.7.0, meaning there are bugs that have not been fixed yet.
    So the first thing you can do is to repair permissions in Disk Utility and restart your Mac. I don't think that will exactly fix the problem, but it's a step.
    When it's restarted, wait a few minutes and put it to sleep and wake it up and report back.

  • [solved] Still having problems with ATI card

    Hi there,
    I posted a message over a week ago concerning issues that I am having getting my ATI Radeon card to function adequately with X
    Currently i'm using the xf86-video-ati-6.10.0-1 driver however for some reason this doesn't work properly for my card (I had a similar problem in Gentoo that I could only over come by using the ATI drivers). The problem is that the screen is shifted 2.5 cms to the left and there is a 1.5 cm gap at the top of the screen and 1cm at the bottom of the screen, I realise that I could "fix" this by adjusting HPosition, Hsize, VPosition and Vsize. However I don't want to be altering the screen every time I use the computer.
    So I have been trying to get the ATI drivers onto the system, I have solved most of the problems by running pacman -Syu
    The problem that i'm getting when trying to install the ATI driver (catalyst) is the following
    [root@Blackhp mike]# pacman -Sy catalyst
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    resolving dependencies...
    looking for inter-conflicts...
    :: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] Y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: ati-dri: requires libgl>=7.2
    [root@Blackhp mike]
    If anyone knows how I can fix this it would be appreciated
    Mike
    Last edited by 2k (2009-01-26 01:00:00)

    Hi there , I have the same problem and after I removed libgl, installed catalyst and catlyst-utils from yaourt, I still cannot upgrade my arch.
    [root@htpc pkg]# pacman -Su --ignore libgl
    :: Starting full system upgrade...
    :: Replace amarok-base with extra/amarok? [Y/n]
    :: Replace amarok-engine-xine with extra/amarok? [Y/n]
    resolving dependencies...
    :: ati-dri requires installing libgl from IgnorePkg/IgnoreGroup. Install anyway? [Y/n]
    looking for inter-conflicts...
    :: libgl conflicts with catalyst-utils. Remove catalyst-utils? [Y/n] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: libgl: conflicts with catalyst-utils
    OR
    [root@htpc pkg]# pacman -Su
    :: Starting full system upgrade...
    :: Replace amarok-base with extra/amarok? [Y/n]
    :: Replace amarok-engine-xine with extra/amarok? [Y/n]
    resolving dependencies...
    looking for inter-conflicts...
    :: libgl conflicts with catalyst-utils. Remove catalyst-utils? [Y/n] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: libgl: conflicts with catalyst-utils
    but libgl is removed:
    [root@htpc pkg]# pacman -Qi libgl
    error: package "libgl" not found
    [root@htpc pkg]#
    I'm going mad...
    [EDIT]: now what i did and resolved it meanwhile.
    I needed to install libgl , then removed catalyst and catalyst-utils. Then made pacman -Syu. Then again I deleted libgl and ati-dri and xf86-video-radeonhd and it works.
    Last edited by molni (2009-06-10 05:31:01)

  • [SOLVED] So many problems with the RTL8723au wireless card:

    Hello,
       I have been a long time linux user (Ubuntu & CentOS) and recently switched to Arch Linux. My laptop usually has strange issues with all sorts of stuff when it runs Linux like graphics cards, brightness control, and WiFi. So far I have been able to fix the first two on my own from the wiki.
       In Ubuntu I was used to having to clone into https://github.com/lwfinger/rtl8723au and then making the driver. After a quick modprobe 8723au the wireless interface came up and was working perfectly with NetworkManager.
       After doing the same thing with Arch, NetworkManager cannot connect to the internet, neither can Wicd which gets stuck at the Authentication step. I finally disabled both of these services and used wpa_supplicant to successfully connect but after a lot of errors. I am pretty sure something is wrong with the wireless driver, and not Wicd, NetworkManager, and wpa_supplicant at the same time.
    There is no output from  iw dev
    'Not connected.' from  iw dev wlp0s26u1u4i2   even though wpa_supplicant is connected to the internet.
    Output of   sudo wpa_supplicant -Dwext -iwlp0s26u1u4i2 -c./wpa_test  :
    (wpa_supplicant takes a good 3 minutes to connect)
    Successfully initialized wpa_supplicant
    ioctl[SIOCSIWAP]: Operation not permitted
    ioctl[SIOCSIWENCODEEXT]: Invalid argument
    ioctl[SIOCSIWENCODEEXT]: Invalid argument
    wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
    wlp0s26u1u4i2: Association request to the driver failed
    wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
    wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
    wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed [id=0 id_str=]
    wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
    wlp0s26u1u4i2: Association request to the driver failed
    wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
    wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
    wlp0s26u1u4i2: CTRL-EVENT-EAP-STARTED EAP authentication started
    EAP: buildIdentity: identity configuration was not available
    wlp0s26u1u4i2: CTRL-REQ-IDENTITY-0:Identity needed for SSID Eden
    wlp0s26u1u4i2: CTRL-EVENT-EAP-FAILURE EAP authentication failed
    wlp0s26u1u4i2: Authentication with 00:22:3f:84:59:74 timed out.
    ioctl[SIOCSIWAP]: Operation not permitted
    wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=3 locally_generated=1
    wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=1 duration=10
    wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
    wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
    wlp0s26u1u4i2: Association request to the driver failed
    wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
    wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
    wlp0s26u1u4i2: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=2 duration=20
    wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
    wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
    wlp0s26u1u4i2: Association request to the driver failed
    wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
    wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
    wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed
    Output of dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] e820: update [mem 0xc3dad018-0xc3dbd057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3dad017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3dad018-0x00000000c3dbd057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3dbd058-0x00000000c4daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f61000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcf8000) (1020MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fcf8000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3dad000) (11MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3dad000-0x00000000c3dbe000) (0MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3dbe000-0x00000000c418a000) (3MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bd000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bd000-0x00000000c61be000) (0MB)
    [ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000c61be000-0x00000000c61bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
    [ 0.000000] efi: mem28: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c7b67000) (23MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c7b67000-0x00000000c864a000) (10MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c88b3000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b3000-0x00000000c8c65000) (3MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7c000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7c000-0x00000000c8c7d000) (0MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000c8c7d000-0x00000000c8c7e000) (0MB)
    [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000c8c7e000-0x00000000ca3bf000) (23MB)
    [ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
    [ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
    [ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
    [ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
    [ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
    [ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
    [ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
    [ 0.000000] efi: mem69: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
    [ 0.000000] efi: mem70: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
    [ 0.000000] efi: mem71: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
    [ 0.000000] efi: mem74: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
    [ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem81: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
    [ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
    [ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
    [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
    [ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
    [ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
    [ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
    [ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
    [ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
    [ 0.000000] [mem 0xca600000-0xca7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fcf8000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000cafbb000 000040
    [ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
    [ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2066246
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12807 pages used for memmap
    [ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3dad000-0xc3dadfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3dbd000-0xc3dbdfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7994740K/8264984K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 270244K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2494.288 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.43 BogoMIPS (lpj=8314293)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000021] init_memory_mapping: [mem 0xca7bf000-0xca864fff]
    [ 0.000024] [mem 0xca7bf000-0xca864fff] page 4k
    [ 0.000040] init_memory_mapping: [mem 0xca865000-0xca865fff]
    [ 0.000041] [mem 0xca865000-0xca865fff] page 4k
    [ 0.000049] init_memory_mapping: [mem 0xca866000-0xca867fff]
    [ 0.000050] [mem 0xca866000-0xca867fff] page 4k
    [ 0.000058] init_memory_mapping: [mem 0xca868000-0xca868fff]
    [ 0.000059] [mem 0xca868000-0xca868fff] page 4k
    [ 0.000067] init_memory_mapping: [mem 0xca869000-0xca86efff]
    [ 0.000068] [mem 0xca869000-0xca86efff] page 4k
    [ 0.000077] init_memory_mapping: [mem 0xca86f000-0xca86ffff]
    [ 0.000078] [mem 0xca86f000-0xca86ffff] page 4k
    [ 0.000086] init_memory_mapping: [mem 0xca870000-0xca882fff]
    [ 0.000087] [mem 0xca870000-0xca882fff] page 4k
    [ 0.000095] init_memory_mapping: [mem 0xca883000-0xca883fff]
    [ 0.000096] [mem 0xca883000-0xca883fff] page 4k
    [ 0.000104] init_memory_mapping: [mem 0xca884000-0xca893fff]
    [ 0.000105] [mem 0xca884000-0xca893fff] page 4k
    [ 0.000113] init_memory_mapping: [mem 0xca894000-0xca894fff]
    [ 0.000114] [mem 0xca894000-0xca894fff] page 4k
    [ 0.000121] init_memory_mapping: [mem 0xca895000-0xca8a8fff]
    [ 0.000123] [mem 0xca895000-0xca8a8fff] page 4k
    [ 0.000130] init_memory_mapping: [mem 0xca8a9000-0xca8a9fff]
    [ 0.000132] [mem 0xca8a9000-0xca8a9fff] page 4k
    [ 0.000139] init_memory_mapping: [mem 0xca8aa000-0xca8e2fff]
    [ 0.000140] [mem 0xca8aa000-0xca8e2fff] page 4k
    [ 0.000148] init_memory_mapping: [mem 0xca8e3000-0xca934fff]
    [ 0.000149] [mem 0xca8e3000-0xca934fff] page 4k
    [ 0.000158] init_memory_mapping: [mem 0xca935000-0xca9befff]
    [ 0.000159] [mem 0xca935000-0xca9befff] page 4k
    [ 0.000168] init_memory_mapping: [mem 0xca9bf000-0xcaabefff]
    [ 0.000169] [mem 0xca9bf000-0xcaabefff] page 4k
    [ 0.023864] Security Framework initialized
    [ 0.023874] AppArmor: AppArmor disabled by boot time parameter
    [ 0.023876] Yama: becoming mindful.
    [ 0.024490] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.027098] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.028239] Mount-cache hash table entries: 256
    [ 0.028442] Initializing cgroup subsys memory
    [ 0.028448] Initializing cgroup subsys devices
    [ 0.028450] Initializing cgroup subsys freezer
    [ 0.028452] Initializing cgroup subsys net_cls
    [ 0.028454] Initializing cgroup subsys blkio
    [ 0.028478] CPU: Physical Processor ID: 0
    [ 0.028479] CPU: Processor Core ID: 0
    [ 0.028485] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.028953] mce: CPU supports 7 MCE banks
    [ 0.028966] CPU0: Thermal monitoring enabled (TM1)
    [ 0.028975] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.029094] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.030319] ACPI: Core revision 20131115
    [ 0.038302] ACPI: All ACPI Tables successfully acquired
    [ 0.052784] ftrace: allocating 21068 entries in 83 pages
    [ 0.064716] dmar: Host address width 36
    [ 0.064719] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.064726] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.064727] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.064732] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.064734] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
    [ 0.064735] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
    [ 0.064810] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.064811] HPET id 0 under DRHD base 0xfed91000
    [ 0.064984] Enabled IRQ remapping in x2apic mode
    [ 0.064986] Enabling x2apic
    [ 0.064988] Enabled x2apic
    [ 0.064996] Switched APIC routing to cluster x2apic.
    [ 0.065463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.098505] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.098516] TSC deadline timer enabled
    [ 0.098529] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.098537] ... version: 3
    [ 0.098538] ... bit width: 48
    [ 0.098539] ... generic registers: 4
    [ 0.098540] ... value mask: 0000ffffffffffff
    [ 0.098541] ... max period: 0000ffffffffffff
    [ 0.098542] ... fixed-purpose events: 3
    [ 0.098543] ... event mask: 000000070000000f
    [ 0.125340] x86: Booting SMP configuration:
    [ 0.139207] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.125342] .... node #0, CPUs: #1 #2 #3
    [ 0.179947] x86: Booted up 1 node, 4 CPUs
    [ 0.179950] smpboot: Total of 4 processors activated (19962.73 BogoMIPS)
    [ 0.184637] devtmpfs: initialized
    [ 0.187964] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
    [ 0.188857] RTC time: 16:04:30, date: 03/26/14
    [ 0.188897] NET: Registered protocol family 16
    [ 0.189005] cpuidle: using governor ladder
    [ 0.189006] cpuidle: using governor menu
    [ 0.189036] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.189038] ACPI: bus type PCI registered
    [ 0.189040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.189115] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.189117] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.197814] PCI: Using configuration type 1 for base access
    [ 0.198491] bio: create slab <bio-0> at 0
    [ 0.198622] ACPI: Added _OSI(Module Device)
    [ 0.198623] ACPI: Added _OSI(Processor Device)
    [ 0.198625] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.198626] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.201979] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.218281] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.218701] ACPI: Dynamic OEM Table Load:
    [ 0.218703] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.231416] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.231864] ACPI: Dynamic OEM Table Load:
    [ 0.231866] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.241296] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.241708] ACPI: Dynamic OEM Table Load:
    [ 0.241710] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.678858] ACPI: Interpreter enabled
    [ 0.678866] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 0.678871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 0.678887] ACPI: (supports S0 S3 S4 S5)
    [ 0.678889] ACPI: Using IOAPIC for interrupt routing
    [ 0.678920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.679079] ACPI: No dock devices found.
    [ 0.685419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.685425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.685568] \_SB_.PCI0:_OSC invalid UUID
    [ 0.685569] _OSC request data:1 1f 0
    [ 0.685574] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.686120] PCI host bridge to bus 0000:00
    [ 0.686123] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.686126] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.686128] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.686130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.686132] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.686133] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.686135] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.686137] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.686139] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.686141] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.686142] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.686144] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.686146] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.686148] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.686150] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.686152] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.686153] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.686163] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.686272] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.686286] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.686294] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.686300] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
    [ 0.686402] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.686414] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.686545] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.686571] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
    [ 0.686651] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.686706] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.686750] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.686777] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
    [ 0.686860] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.686964] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.686989] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
    [ 0.687090] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.687163] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.687207] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.687225] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
    [ 0.687303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.687360] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.687405] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.687430] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
    [ 0.687530] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.687599] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.687643] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
    [ 0.687844] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.687867] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
    [ 0.687876] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
    [ 0.687885] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
    [ 0.687895] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
    [ 0.687904] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
    [ 0.687915] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
    [ 0.687967] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.688054] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.688073] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
    [ 0.688097] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
    [ 0.688200] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.688225] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
    [ 0.688950] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689014] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689078] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689138] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689201] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689262] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689329] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.689694] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.689701] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.689762] Found 1 acpi root devices
    [ 0.689805] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.689890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.689893] vgaarb: loaded
    [ 0.689894] vgaarb: bridge control possible 0000:00:02.0
    [ 0.689928] PCI: Using ACPI for IRQ routing
    [ 0.691760] PCI: pci_cache_line_size set to 64 bytes
    [ 0.691768] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.691809] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.691811] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.691813] e820: reserve RAM buffer [mem 0xc3dad018-0xc3ffffff]
    [ 0.691814] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
    [ 0.691816] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
    [ 0.691818] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.691819] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.691905] NetLabel: Initializing
    [ 0.691906] NetLabel: domain hash size = 128
    [ 0.691907] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.691921] NetLabel: unlabeled traffic allowed by default
    [ 0.691943] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.691949] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.693981] Switched to clocksource hpet
    [ 0.698589] pnp: PnP ACPI init
    [ 0.698603] ACPI: bus type PNP registered
    [ 0.698701] pnp 00:00: [dma 4]
    [ 0.698727] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.698749] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.698850] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.698888] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.698933] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.698935] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.698937] system 00:04: [io 0xffff] has been reserved
    [ 0.698939] system 00:04: [io 0xffff] has been reserved
    [ 0.698942] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.698944] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.698946] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.698948] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.698951] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.698982] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.699027] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.699031] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.699074] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.699112] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
    [ 0.699241] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.699243] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.699245] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.699248] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.699250] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.699252] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.699254] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.699257] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.699259] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.699261] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.699264] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.699560] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.699562] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.699565] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.699582] pnp: PnP ACPI: found 11 devices
    [ 0.699583] ACPI: bus type PNP unregistered
    [ 0.706306] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
    [ 0.706314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.706316] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.706319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.706320] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.706322] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.706324] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.706326] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.706328] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.706330] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.706332] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.706334] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.706336] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.706338] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.706340] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.706342] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.706344] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
    [ 0.706377] NET: Registered protocol family 2
    [ 0.706559] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.706739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.706918] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.706937] TCP: reno registered
    [ 0.706951] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.706985] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.707065] NET: Registered protocol family 1
    [ 0.707077] pci 0000:00:02.0: Boot video device
    [ 0.734160] PCI: CLS 64 bytes, default 64
    [ 0.734206] Unpacking initramfs...
    [ 0.799245] Freeing initrd memory: 3104K (ffff88007fcf8000 - ffff880080000000)
    [ 0.799255] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.799258] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
    [ 0.799286] Simple Boot Flag at 0x44 set to 0x1
    [ 0.799482] Scanning for low memory corruption every 60 seconds
    [ 0.799787] audit: initializing netlink socket (disabled)
    [ 0.799797] type=2000 audit(1395849870.769:1): initialized
    [ 0.815211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.816571] zbud: loaded
    [ 0.816755] VFS: Disk quotas dquot_6.5.2
    [ 0.816796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.816964] msgmni has been set to 15732
    [ 0.817018] Key type big_key registered
    [ 0.817253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.817299] io scheduler noop registered
    [ 0.817302] io scheduler deadline registered
    [ 0.817333] io scheduler cfq registered (default)
    [ 0.817390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.817405] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.817464] efifb: probing for efifb
    [ 0.818285] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90009280000, using 5628k, total 5625k
    [ 0.818287] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.818288] efifb: scrolling: redraw
    [ 0.818289] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.823011] Console: switching to colour frame buffer device 200x56
    [ 0.827654] fb0: EFI VGA frame buffer device
    [ 0.827662] intel_idle: MWAIT substates: 0x21120
    [ 0.827664] intel_idle: v0.4 model 0x3A
    [ 0.827665] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.827817] GHES: HEST is not enabled!
    [ 0.827872] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.828333] Linux agpgart interface v0.103
    [ 0.828392] rtc_cmos 00:05: RTC can wake from S4
    [ 0.828526] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.828569] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.828579] Intel P-state driver initializing.
    [ 0.828589] Intel pstate controlling: cpu 0
    [ 0.828603] Intel pstate controlling: cpu 1
    [ 0.828627] Intel pstate controlling: cpu 2
    [ 0.828638] Intel pstate controlling: cpu 3
    [ 0.828736] drop_monitor: Initializing network drop monitor service
    [ 0.828775] TCP: cubic registered
    [ 0.828835] NET: Registered protocol family 10
    [ 0.828947] NET: Registered protocol family 17
    [ 0.828953] Key type dns_resolver registered
    [ 0.829123] registered taskstats version 1
    [ 0.829544] Magic number: 6:146:86
    [ 0.829615] rtc_cmos 00:05: setting system clock to 2014-03-26 16:04:31 UTC (1395849871)
    [ 0.829652] PM: Hibernation image not present or could not be loaded.
    [ 0.830252] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 0.830253] Write protecting the kernel read-only data: 8192k
    [ 0.831855] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
    [ 0.832573] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
    [ 0.837842] random: systemd-tmpfile urandom read with 2 bits of entropy available
    [ 0.838870] systemd-udevd[56]: starting version 211
    [ 0.853108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.860944] ACPI: bus type USB registered
    [ 0.860963] usbcore: registered new interface driver usbfs
    [ 0.860970] usbcore: registered new interface driver hub
    [ 0.861033] usbcore: registered new device driver usb
    [ 0.861644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.862015] ehci-pci: EHCI PCI platform driver
    [ 0.862170] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.862179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.862201] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.864782] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.864821] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.866118] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.866136] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
    [ 0.867411] SCSI subsystem initialized
    [ 0.868417] libata version 3.00 loaded.
    [ 0.874215] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.874372] hub 1-0:1.0: USB hub found
    [ 0.874378] hub 1-0:1.0: 2 ports detected
    [ 0.874585] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.874593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.874605] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.878522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.878538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
    [ 0.887569] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.887716] hub 2-0:1.0: USB hub found
    [ 0.887723] hub 2-0:1.0: 2 ports detected
    [ 0.887965] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.887974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.888073] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.888098] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 0.888335] hub 3-0:1.0: USB hub found
    [ 0.888348] hub 3-0:1.0: 4 ports detected
    [ 0.888700] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.888703] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.888900] hub 4-0:1.0: USB hub found
    [ 0.888909] hub 4-0:1.0: 4 ports detected
    [ 0.891125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.914375] ahci 0000:00:1f.2: version 3.0
    [ 0.914482] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.914525] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
    [ 0.914527] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.915307] scsi0 : ahci
    [ 0.915378] scsi1 : ahci
    [ 0.915435] scsi2 : ahci
    [ 0.915484] scsi3 : ahci
    [ 0.915536] scsi4 : ahci
    [ 0.915587] scsi5 : ahci
    [ 0.915615] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
    [ 0.915616] ata2: DUMMY
    [ 0.915617] ata3: DUMMY
    [ 0.915617] ata4: DUMMY
    [ 0.915618] ata5: DUMMY
    [ 0.915619] ata6: DUMMY
    [ 1.181353] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.234678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.235451] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.235457] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
    [ 1.235461] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.236043] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.236192] ata1.00: configured for UDMA/133
    [ 1.236523] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
    [ 1.239286] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.239503] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.239506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.239553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.241490] sda: sda1 sda2 sda3
    [ 1.242898] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.303737] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.305587] hub 1-1:1.0: USB hub found
    [ 1.305681] hub 1-1:1.0: 6 ports detected
    [ 1.366288] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [ 1.366410] systemd[1]: Detected architecture 'x86-64'.
    [ 1.366949] systemd[1]: Set hostname to <ArchYogi>.
    [ 1.371967] systemd-efi-boot-generator[115]: Checking was requested for /dev/disk/by-partuuid/3729fee9-5517-4bce-aed1-950a27a8114c, but /sbin/fsck.vfat cannot be used: No such file or directory
    [ 1.371970] systemd-fstab-generator[117]: Checking was requested for /dev/disk/by-uuid/C8B9-B8D5, but /sbin/fsck.vfat cannot be used: No such file or directory
    [ 1.407523] systemd[1]: Starting Login Prompts.
    [ 1.407601] systemd[1]: Reached target Login Prompts.
    [ 1.407612] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.407652] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.407662] systemd[1]: Starting Remote File Systems.
    [ 1.407717] systemd[1]: Reached target Remote File Systems.
    [ 1.407737] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.407857] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.407872] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.407894] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.407901] systemd[1]: Starting Paths.
    [ 1.407950] systemd[1]: Reached target Paths.
    [ 1.407960] systemd[1]: Starting Encrypted Volumes.
    [ 1.408010] systemd[1]: Reached target Encrypted Volumes.
    [ 1.408020] systemd[1]: Expecting device dev-sda3.device...
    [ 1.408063] systemd[1]: Expecting device dev-disk-by\x2duuid-a1cade15\x2dfeac\x2d4130\x2d977f\x2d86fc383ac3b0.device...
    [ 1.408123] systemd[1]: Starting EFI System Partition Automount.
    [ 1.408222] systemd[1]: Set up automount EFI System Partition Automount.
    [ 1.408230] systemd[1]: Expecting device dev-disk-by\x2duuid-C8B9\x2dB8D5.device...
    [ 1.408281] systemd[1]: Starting Root Slice.
    [ 1.411504] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.412296] systemd[1]: Created slice Root Slice.
    [ 1.412305] systemd[1]: Starting User and Session Slice.
    [ 1.412462] systemd[1]: Created slice User and Session Slice.
    [ 1.412471] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.412540] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.412548] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.412612] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.412623] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.412684] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.412692] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.412756] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.412766] systemd[1]: Starting udev Control Socket.
    [ 1.412824] systemd[1]: Listening on udev Control Socket.
    [ 1.412833] systemd[1]: Starting udev Kernel Socket.
    [ 1.412889] systemd[1]: Listening on udev Kernel Socket.
    [ 1.412898] systemd[1]: Starting Journal Socket.
    [ 1.412966] systemd[1]: Listening on Journal Socket.
    [ 1.412979] systemd[1]: Starting System Slice.
    [ 1.413125] systemd[1]: Created slice System Slice.
    [ 1.413138] systemd[1]: Started File System Check on Root Device.
    [ 1.413144] systemd[1]: Mounting Temporary Directory...
    [ 1.413728] systemd[1]: Starting system-getty.slice.
    [ 1.413910] systemd[1]: Created slice system-getty.slice.
    [ 1.413938] systemd[1]: Mounting Debug File System...
    [ 1.414223] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.414616] systemd[1]: Mounting Huge Pages File System...
    [ 1.419477] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.419852] systemd[1]: Starting Setup Virtual Console...
    [ 1.420199] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.421416] systemd[1]: Started Load Kernel Modules.
    [ 1.422447] systemd[1]: Starting Apply Kernel Variables...
    [ 1.423037] systemd[1]: Mounting Configuration File System...
    [ 1.423497] systemd[1]: Mounted FUSE Control File System.
    [ 1.425369] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.425389] systemd[1]: Starting Journal Service...
    [ 1.425806] systemd[1]: Started Journal Service.
    [ 1.442839] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 1.475136] systemd-udevd[149]: starting version 211
    [ 1.522849] ACPI: AC Adapter [ADP1] (off-line)
    [ 1.523074] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 1.523090] ACPI: Lid Switch [LID0]
    [ 1.523129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 1.523134] ACPI: Power Button [PWRB]
    [ 1.523168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.523170] ACPI: Power Button [PWRF]
    [ 1.526299] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 1.526305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.526309] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 1.526313] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
    [ 1.526317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.526318] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 1.526322] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
    [ 1.526325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.526327] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.533112] [drm] Initialized drm 1.1.0 20060810
    [ 1.534509] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 1.534851] wmi: Mapper loaded
    [ 1.535603] hub 2-1:1.0: USB hub found
    [ 1.535690] hub 2-1:1.0: 8 ports detected
    [ 1.546749] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 1.554361] ACPI: Battery Slot [BAT1] (battery present)
    [ 1.557790] hda_codec: CX20590: BIOS auto-probing.
    [ 1.559167] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.559170] ACPI: Thermal Zone [TZ01] (45 C)
    [ 1.560277] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
    [ 1.564563] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 1.566923] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.567155] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.567178] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.570300] [drm] Memory usable by graphics device = 2048M
    [ 1.570304] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
    [ 1.570306] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 1.570321] Console: switching to colour dummy device 80x25
    [ 1.573241] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 1.575075] platform microcode: Direct firmware load failed with error -2
    [ 1.575079] platform microcode: Falling back to user helper
    [ 1.587933] Adding 8361280k swap on /dev/sda3. Priority:-1 extents:1 across:8361280k SSFS
    [ 1.605235] iTCO_vendor_support: vendor-support=0
    [ 1.605675] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 1.605700] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.605797] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.606377] systemd-journald[134]: Received request to flush runtime journal from PID 1
    [ 1.615249] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
    [ 1.616772] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 1.616788] platform microcode: Direct firmware load failed with error -2
    [ 1.616790] platform microcode: Falling back to user helper
    [ 1.618686] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 1.618695] platform microcode: Direct firmware load failed with error -2
    [ 1.618696] platform microcode: Falling back to user helper
    [ 1.619001] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 1.619013] platform microcode: Direct firmware load failed with error -2
    [ 1.619016] platform microcode: Falling back to user helper
    [ 1.619330] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.621755] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 1.621762] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.621763] [drm] Driver supports precise vblank timestamp query.
    [ 1.621848] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.715200] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
    [ 1.730067] fbcon: inteldrmfb (fb0) is primary device
    [ 1.765339] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
    [ 1.802021] tsc: Refined TSC clocksource calibration: 2494.337 MHz
    [ 1.830499] intel_rapl: domain uncore energy ctr 60509:60509 not working, skip
    [ 1.915603] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
    [ 2.151154] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.152936] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.157046] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 2.157172] usbcore: registered new interface driver rts5139
    [ 2.157210] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S.

    Apparently one cannot run dhcpcd AND NetworkManager at the same time. I feel really stupid, but at the same time I spent most of today looking through the wiki.
    For those newbies who ran into this, do this with root access:
    systemctl disable dhcpcd.service
    systemctl enable NetworkManager.service
    Marking this as solved.

  • [Solved] Very strange problem with kernel-modules & NTFS write speed

    I was getting very low copying speed when copying files to NTFS partitions, around 8-10 MB. But, when I commented the modules section in /etc/rc.conf file, the speed dramatically improved upto 5-6x. Now, it also created some problems for me. Like vboxdrv is required by Virtualbox to function & cpufreq_ondemand is required by my AMD processor. Please help me & tell what I'm doing wrong. I'm also posting the output of my /etc/rc.conf file here
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged.
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    # VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="localtime"
    TIMEZONE="Asia/Kolkata"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    VERBOSE="3"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    #MOD_AUTOLOAD="yes"
    #MODULES=(microcode powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt )
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="AX-64"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=192.168.1.2
    netmask=255.255.255.0
    gateway=192.168.1.1
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock @acpid syslog-ng network netfs dkms_autoinstaller sshd @crond @alsa dbus hal gdm @cpufreq @cpu)
    Last edited by tarun.hellknight (2012-02-04 16:55:39)

    Sorry for replying late.. Was very busy.. So, the thing is that I disabled every module & loaded only microcode & powernow-k8 in /etc/rc.local. Now, I'm getting good speed while copying data but the problem is that the processor is running & full speed i.e. 3.0 GHz. I checked it via cat /proc/cpuinfo. Also, there is a message in the bootime, that i'm posting here..
    grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory
    If it helps, here's the output of cat /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 16
    model : 5
    model name : AMD Athlon(tm) II X4 640 Processor
    stepping : 3
    microcode : 0x10000b6
    cpu MHz : 3000.000
    cache size : 512 KB
    physical id : 0
    siblings : 4
    core id : 0
    cpu cores : 4
    apicid : 0
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
    bogomips : 6002.74
    TLB size : 1024 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm stc 100mhzsteps hwpstate
    Last edited by tarun.hellknight (2012-02-01 18:49:55)

Maybe you are looking for

  • Incredibly slow MacBook, Internal Hard Drive issues...

    Good morning everybody! I'm apologize if this post is extremely wordy... I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired. _Brief history:_ Several months ago, this MacB

  • I'm not always able to see attachments to emails in Mac Mail.

    My problem was reported by another user here: https://discussions.apple.com/thread/2741238?start=0&tstart=0. But since he never seemed to receive a reply (the thread was diverted to deal with another problem), let me pose it again. I am using Mail 4.

  • Backups

    I did a quick search, but nothing showed up. I wanted to backup my data. However there wasn't a specific menu item to do this. Perhaps something like that should be added so that one can manually (instead of waiting for the daily, weekly, or monthly

  • Disappearing user settings

    Last year I set up a mini for my wife and added it to a small network connected to my iMac. To speed things I went through the mini installation as if I were the only user and she has been operating the mini ever since. Last week I was helping her or

  • Dynamic action - show/hide region based on LOV which returns ID

    Hi folks, this should be simple, so someone who works with dynamic actions. I have a LOV which is based on below query: select OBJECT_ID, KOD   from x_data x; retuns:    ID          KOD     492961 BMW     492964 VOLVO     492960 MERCEDES     492963 V