[solved-ish?]tp_smapi charge thresholds not charging
I've searched the forums, followed the wiki, but can't find an answer to my problems.
I recently bought a used T60p, did the start charge at 40% and the stop charge at 80%.
Right now, my battery is at 43%, so it should be charing normally, but acpi says the following:
[heleos@thinkpad ~]\$ acpi
Battery 0: Unknown, 43%
The battery does not charge as I think it should. When I modprobe -r tp_smapi, the battery begins to charge.
I'm kind of at a loss as to what I'm doing wrong, so if anyone does know, chime in please! Thanks
Last edited by heleos (2011-09-12 02:08:01)
Found this thread (https://bbs.archlinux.org/viewtopic.php?id=113105), didn't come up in my search.... I'll mark this closed for now?
Similar Messages
-
Can't Change KDM wallpaper/background [Solved'ish]
Hi, any suggestions welcome.
I am using KDE4.3
I want to change the blue background with bubbles to just black, I have tried all settings in systemsettings both as root and as user with no change.
As a last resort I have even changed every blue bubble (oxygen air) image in /usr/* that I can find to black, only to find I still have blue bubbles on login/splash.
I have also tried both Ksplash and Kdm generators, but neither changes wallpaper.
please help me
Tim
Last edited by foggybrain (2010-01-06 22:04:50)no change
btw, KDM is set to auto log me in, so i don't even see the login page, just a splash.
EDIT
Have just tried ksplash-oxyarch from the AUR, works perfectly giving me a black splash background.
It needed kde-meta-kdebase that was not installed before, I have no idear if this was affecting my ability to change the background.
Anyway...solved'ish
Last edited by foggybrain (2010-01-06 22:08:36) -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you
What does this have to do with using an iPhone in an enterprise environment?
What carrier are you using and where did you get the phone? -
How can i solve the vpn server could not be found error on my iphone 5s?
how can i solve the vpn server could not be found error on my iphone 5s?
FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues. -
How to solve this soft will be not installed because hp recovery cannot be found in your system
how to solve this soft will be not installed because hp recovery cannot be found in your system
i dont know how to solve this and i dont know how big company like HP didnot make solution for this problem
i hope to find solution for this problem
( HP Pavilion dv6-6120se ) this is my computer nameHi,
I can't see the image and may be won't be able to see it fox next 24hrs. You need Admin/moderator of this forum to approve it before other can see and today is a public holiday in the US.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
[SOLVED] Lightdm theming (GTK) does not work?
Hi,
Silly maybe, but in trying out lightdm(-GTK) to replace gdm, I am unable to change the GTK-theme in /etc/lightdm/lightdm-gtk-greeter.conf.
I was able to change the background and the font, but the theme, the icon (and maybe cursor) remain the default grey. I have tried using Adwaita, which should be installed together with gnome 3 and I have installed gnome-shell-theme-faience from AUR to try it out. None of them are working.
Maybe this is related:
I do seem to have another problem with the user-theme-extension: it was outdated according to extensions.gnome.org, so I removed it with pacman and I installed it via the gnome website. But gnome-tweak-tool keeps telling me there is an error with the extension and I'm not able to set a user theme with that tool...
Anybody have a clue? The wiki nor the AUR hold much info on this and the web is talking about the unity-greeter mostly...
Last edited by zenlord (2012-06-18 17:18:07)The lack of responses seem to indicate two possibilities:
1. I'm the only one having a problem, or
2. This is not a bug - I should theme lightdm-gtk manually.
In either case: the extension-problem is solved now, so that should not interfere (anymore), and upgrading to the latest lightdm(-gtk-greeter) has not solved the problem...
Last edited by zenlord (2012-06-05 08:02:40) -
My Arabic keyboard is missing letter it is different of my iPhone 3 and I pad how to solve the problem it is not only mine it is most of the iphone4
Najsar wrote:
My Arabic keyboard is missing letter
No, it's not. You get extra letters by holding down the existing keys and selecting them from the popup menu which appears. -
Ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]
ive tried
1.1
1.2
1.3
1.42
come on msi, give me a fighting chance :(Here is the last thing I received from MSI tech support. I'll give them this much, they are much more responsive than VIA or AOpen ever were when I first got my flakey MVP3 board...lol. I hope they can figure this problem out!
Quote
So far in our own testing, we have not found any High CPU Temperature issues.
We have gone through the threads you have provided to us and we will co-work with AMD to see if anything needs to be updated from our side with the New Castle Core.
Once again, MSI appreciates all the findings/reports you have provided to us and we will update you once there is any findings becomes available.
Sincerely,
Technical Support Division
MSI Computer Corp.
http://www.msicomputer.com
MSI - Beyond Expectations!
1-626-913-0828
1-626-581-7721 Fax
Due to high volume of cases daily, we may not be able to answer question promptly. Please kindly provide your name, phone number, model number, state in which you are calling from, a brief description of your problems, and we will try to reply your issue as promptly as possible. Thanks
The information transmitted is intended only for the person or entity to which it is addressed and contained confidential and privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient are prohibited. If you receive this in error, please contact the sender and delete the material from any computer.
-----Original Message-----
From: my email deleted
Sent: Friday, August 06, 2004 8:51 AM
To: [email protected]
Subject: RE: 3 -- Customer Problem Description Form
I know you guys think you fixed the Newcastle temperature problem. But there are still a LOT of us out here who are having trouble, using latest BIOS. People are reporting this all over the MSI forums. The behavior is as follows, flashing the BIOS might help initially, but soon after the temp shoots way back up.
Please see the following threads:
Temps and BIOS 1.42
ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]
Possible fix for CPU temp problem found.
The same old problem with temperatures (K8N Neo Platinum)
K8N Neo Temps :( -
I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please help guys
Sounds to me like a hardware issue or maybe something is stuck in the headphone jack. When you plug in headphones, the jack in the iPad is switched to play only through the headphones and not the iPad's speakers. Sounds like either the jack is faulty or there is something stuck in the headphone jack. Get a flashlight & look inside the jack for anything that looks like it doesn't belong in there.
Regardless, I'd take it in to an Apple Store if you have one nearby to have it checked.
EDIT: "Ocean20" had an excellent suggestion above. While doing that, you may also want to rotate/twist the plug in the jack back & forth a few times as well. Dirty contacts can often times be cleared by doing this. -
[SOLVED] (ish) Trine 2 not working, ksmserver issue ?
I have Trine 2 that I got from the Humble Indie Bundle 9, I failed at "installing" it manually, because of some selinux nonsense, so I used the aur package "trine2-hib" to help me install it.
It was working perfectly, until after some updates it didn't work anymore.
This all started together with the problems caused by the latest update of kde stuff and qt4 not being updated, that solved, I though this would've been solved too, well, not really.
Whenever I run Trine 2 from a .desktop launcher, it kills my kde session and shows me this: "Could not start ksmserver. Check your installation " and only an option to logout.
trine2-hib.desktop content :
[Desktop Entry]
Version=1.0
Type=Application
Categories=Game;
Name=Trine 2: Complete Story
Comment=Frozenbyte
GenericName=Action-Puzzle Platformer
Icon=trine2
Exec=trine2
Terminal=false
If I run it from a console, with the command "trine2" the game starts loading, and then it just closes.
Terminal output:
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline:CARD=0,DEV=0
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline:CARD=0,DEV=0
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM phoneline
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM phoneline
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1959
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2634
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2758
Pa_OpenDefaultStream failed Invalid sample rate
If I run it from a terminal with "kdesudo trine2" it works perfectly, but using this on a regular basis is less than ideal.
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline:CARD=0,DEV=0
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline:CARD=0,DEV=0
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM phoneline
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.CA0106.pcm.modem.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM phoneline
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1959
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2634
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2758
Pa_OpenDefaultStream failed Invalid sample rate <<This appears only when I close the game
I don't think that any of that alsa nonsense has anything to do with this.
I'm putting this on Multimedia as this is actually a problem with a game, however I don't think the game itself is what's causing the problems.
Any ideas ?
Thanks in advance.
Last edited by LucetLux (2014-01-08 16:59:55)Sorry I lost track of this thread, I hope it isn't too late.
Answering to your points;
1; No it doesn't happen, if I run it like that it only closes after the loading screen, but it doesn't crash kde.
2: If I run it on windowed mode it works just fine.
3: I'm using the catalyst proprietary drivers, most other things I've tried work fine, far better than using the opensource drivers, that's why I'm using the proprietary ones. i've only had problems with some windows applications on wine that could be related to the drivers.
4: I don't really know what could be considered of interest, but this looks like it's related:
kwin(22944) KWin::Client::readUserTimeMapTimestamp: User timestamp, ASN: 4294967295
kwin(22944) KWin::Client::readUserTimeMapTimestamp: User timestamp, final: 'ID: 85983238 ;WMCLASS: "trine2_linux_32bit" : "trine2_linux_32bit" ;Caption: "OpenGL test" ' : 194644424
kwin(22944) KWin::Workspace::allowClientActivation: Activation, compared: 'ID: 85983238 ;WMCLASS: "trine2_linux_32bit" : "trine2_linux_32bit" ;Caption: "OpenGL test" ' : 194644424 : 194639746 : true
kwin(22944) KWin::Workspace::updateClientArea: screens: 1 desktops: 4
kwin(22944) KWin::Workspace::updateClientArea: Done.
kwin(22944) KWin::Workspace::allowFullClientRaising: Raising: Belongs to active application
kwin(22944) KWin::Workspace::updateClientArea: screens: 1 desktops: 4
kwin(22944) KWin::Workspace::updateClientArea: Done.
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x5200006
kwin(22944) KWin::Client::readUserTimeMapTimestamp: User timestamp, ASN: 4294967295
Thanks for your help, and sorry for the long delay.
Last edited by LucetLux (2014-01-04 01:00:55) -
How to solve if identical charges in my account
I was charge identical items in my account, how can I discuss this issue?
If you have iTunes installed on a computer, open the application and log in.
Select iTunes Store on the left and scroll down.
Under Help, click on "Support"
That allows you to get in contact with the iTunes support team. You can explain what the problem is. They are usually very good with this kind of issues and very helpful.
Hope it helps! -
Printer shares not working since upgrade to samba 3.5.0 - SOLVED-ish
I share my printer with my wife's XP laptop and another linux box. This has been the position for the past 2 years or so, without any problems at all. Yesterday I did my first reboot for a couple of weeks, and the first, therefore, since samba / smbclient upgraded to 3.5.0. I can no longer print from the XP or other linux boxes. Samba logs the error as :
laptop (10.0.0.5) connect to service Oki initially as user visitor (uid=1001, gid=1001) (pid 12634)
[2010/03/13 18:31:51.509666, 0] printing/print_cups.c:108(cups_connect)
Unable to connect to CUPS server /var/run/cups/cups.sock:631 - Interrupted system call
Setting cups logging to debug, the closest entries to the above attempt is as follows :
D [13/Mar/2010:18:31:21 +0000] cupsdAcceptClient: 13 from localhost (Domain)
D [13/Mar/2010:18:31:21 +0000] Report: clients=1
D [13/Mar/2010:18:31:21 +0000] Report: jobs=500
D [13/Mar/2010:18:31:21 +0000] Report: jobs-active=0
D [13/Mar/2010:18:31:21 +0000] Report: printers=1
D [13/Mar/2010:18:31:21 +0000] Report: printers-implicit=0
D [13/Mar/2010:18:31:21 +0000] Report: stringpool-string-count=1334
D [13/Mar/2010:18:31:21 +0000] Report: stringpool-alloc-bytes=6496
D [13/Mar/2010:18:31:21 +0000] Report: stringpool-total-bytes=18208
D [13/Mar/2010:18:31:21 +0000] cupsdReadClient: 13 WAITING Closing on EOF
D [13/Mar/2010:18:31:21 +0000] cupsdCloseClient: 13
D [13/Mar/2010:18:31:21 +0000] cupsdAcceptClient: 13 from localhost (Domain)
I [13/Mar/2010:18:31:21 +0000] Generating SSL server key...
E [13/Mar/2010:18:32:12 +0000] Unable to create SSL server key file "/etc/cups/ssl/server.key" - No such file or directory
D [13/Mar/2010:18:32:12 +0000] cupsdCloseClient: 13
I am guessing tht the "WAITING Closing on EOF" part may be important.
Other aspects of samba do not appear to be affected. I can mount shares on the remote computers, use smbclient etc.
Googling is not getting me anywhere.
Any help will be greatly appreciated.
Last edited by perseus (2010-03-14 18:54:41)I have had similar issues at my office.......I had a hylafax server (also sharing a couple printers via samba) running on debian 5 (samba 3.2) and upgraded it to debian 6 (samba 3.5). and it was samba printer sharing hell after that. What would happen is I would get samba logs full of the same jibberish
[2011/02/25 15:11:20.201234, 0] lib/util_sock.c:1432(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer
[2011/02/25 15:11:20.201249, 0] smbd/process.c:79(srv_send_smb)
Error writing 4 bytes to client. -1. (Transport endpoint is not connected)
[2011/02/25 15:43:20.134201, 0] lib/util_sock.c:675(write_data)
[2011/02/25 15:43:20.134220, 0] lib/util_sock.c:1432(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer
[2011/02/25 15:43:20.134234, 0] smbd/process.c:79(srv_send_smb)
Error writing 4 bytes to client. -1. (Transport endpoint is not connected)
I only post this here since I think it was more of a samba problem than a debian problem and we seem to be the only ppl out there talking about it......... the getpeername seemed to be the problem (to me anyway) and what would happen on our 25 or so XP home clients is that you would print but it wouldnt go ANYWHERE. Cups was not even recieving the jobs since samba was not passing the jobs to cups.
It seems to me that the XP machines were not finding the server by its hostname so I messed around with changing the clients to map the printer by ip address instead of by hostname and it helped "some" but it still had big time glitchyness.
the only conclusion I could come to in my mind is that this reminded me of back in the day when we had a win98se computer sharing a printer and the windows XP systems would hang for up to 2 min while trying to access the printer. The problem back then amounted to win XP not wanting to downstep to the older way of windows98's password encryption. So I started changing my smb.conf to allow guest on the printer, changed the mask to 777 and I even wrote up a whole new smb.conf from scratch to work on security = share no authentication, allow from everyone 777 etc etc.............STILL had problems.
So I ended up throwing together a new server from a spare machine and installing debian 5.0.3 (with samba 3.2.5) and swapping it out yesterday........now EVERYTHING works fine.
my educated guess here is that the new samba is probobly geared more towards vista & win7 than it is XP (since XP is a pretty old dog these days). I would loved to have worked this issue out but we just could not have the downtime any longer......so it looks like I am not going to be updating for a long time (which I now is not really the best policy) but it has to work.
I hope this helps.....trust me you are not the only ones having this problem. -
SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash
If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
[SOLVED] Kernels from the AUR not compiling properly
Hiya everyone,
I've got a bit of a problem, I think. Early this evening I tried downloading and making the Linux-lqx kernel from the AUR. Largely because why not.
After the tarball downloaded, I ran tar -xvf on it like I always do, ran namcap on the PKGBUILD (it came up with a few superfluous errors), and ran makepkg -s on the PKGBUILD. It downloaded the relevant source, then immediately failed the PGP signature check. I was like, "Oh you AUR!" and ran makepkg -s --skippgpcheck. It did it's thing until it was applying patches, at which point it just failed at a certain point with "ERROR: A failure occured in prepare()", and aborted. I reported the error and the lines that preceded it in the package's page in the AUR.
I got suspicious, and tried the Linux-lbre-xen kernel to test the building of it. Same issue: a prepare() error. Baffled, I thought maybe my building system was broken. I recompiled a few packages I had already built and installed successfully, and they were fine. I grabbed a few more tarballs from the AUR: adobe-air, I think jre, and something else. They all compiled great and installed just fine. Confused, I then tried building Linux-ck. Another prepare() error!
Then I noticed the line that preceded the error, "patching file virt/kvm/kvm_main.c", then the error. Going back to lqx and libre-xen, I tried compiling them again, and sure enough "patching file virt/kvm/kvm_main.c" directly preceded the prepare() error.
What's going on here? Strangely, every kernel I try from the AUR fails the PGP signature check, too. Just the kernels - everything else works as expected. Am I missing something?
Last edited by MrEvilBreakfast (2015-05-24 18:59:02)The build goes fine until:
==> Starting prepare()...
The next patch would create the file Documentation/ABI/testing/debugfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/ABI/testing/sysfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
The next patch would create the file Documentation/filesystems/aufs/README,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/01intro.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/02struct.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03atomic_open.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03lookup.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/04branch.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/05wbr_policy.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06fhsm.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06mmap.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06xattr.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/07export.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/08shwh.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/10dynop.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/99plan.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/kernel-parameters.txt
patching file Documentation/networking/scaling.txt
The next patch would create the file Documentation/scheduler/sched-BFS.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/scsi/link_power_management_policy.txt
patching file Documentation/sysctl/kernel.txt
The next patch would create the file Documentation/tp_smapi.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/virtual/kvm/devices/s390_flic.txt
patching file MAINTAINERS
patching file Makefile
patching file arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
patching file arch/arm/boot/dts/at91-sama5d3_xplained.dts
patching file arch/arm/boot/dts/dove.dtsi
patching file arch/arm/boot/dts/exynos5250-spring.dts
patching file arch/arm/boot/dts/imx23-olinuxino.dts
patching file arch/arm/boot/dts/imx25.dtsi
patching file arch/arm/boot/dts/imx28.dtsi
patching file arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
patching file arch/arm/boot/dts/omap3-n900.dts
patching file arch/arm/boot/dts/ste-dbx5x0.dtsi
patching file arch/arm/boot/dts/ste-href.dtsi
patching file arch/arm/boot/dts/ste-snowball.dts
patching file arch/arm/include/asm/elf.h
patching file arch/arm/include/uapi/asm/kvm.h
patching file arch/arm/kernel/Makefile
patching file arch/arm/kernel/hibernate.c
patching file arch/arm/kernel/process.c
The next patch would create the file arch/arm/kernel/psci-call.S,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kernel/psci.c
The next patch would create the file arch/arm/kernel/reboot.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kvm/arm.c
patching file arch/arm/mach-mvebu/pmsu.c
patching file arch/arm/mach-omap2/prm-regbits-34xx.h
patching file arch/arm/mach-omap2/prm-regbits-44xx.h
patching file arch/arm/mach-omap2/vc.c
patching file arch/arm/mach-omap2/vc.h
patching file arch/arm/mach-omap2/vc3xxx_data.c
patching file arch/arm/mach-omap2/vc44xx_data.c
patching file arch/arm/mach-s3c64xx/crag6410.h
patching file arch/arm/mach-s3c64xx/mach-crag6410.c
patching file arch/arm/net/bpf_jit_32.c
patching file arch/arm64/Kconfig
patching file arch/arm64/Makefile
patching file arch/arm64/include/asm/cpufeature.h
patching file arch/arm64/include/asm/smp_plat.h
patching file arch/arm64/include/uapi/asm/kvm.h
patching file arch/arm64/kernel/cpu_errata.c
patching file arch/arm64/kernel/entry.S
patching file arch/arm64/kernel/head.S
patching file arch/arm64/kernel/setup.c
patching file arch/arm64/kernel/smp.c
patching file arch/arm64/mm/dma-mapping.c
patching file arch/c6x/kernel/time.c
patching file arch/mips/Kconfig
patching file arch/mips/Makefile
patching file arch/mips/bcm47xx/board.c
patching file arch/mips/bcm63xx/prom.c
patching file arch/mips/bcm63xx/setup.c
patching file arch/mips/cavium-octeon/dma-octeon.c
patching file arch/mips/cavium-octeon/setup.c
patching file arch/mips/include/asm/asm-eva.h
patching file arch/mips/include/asm/cacheflush.h
patching file arch/mips/include/asm/cpu-features.h
patching file arch/mips/include/asm/elf.h
patching file arch/mips/include/asm/fpu.h
patching file arch/mips/include/asm/kvm_host.h
patching file arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
patching file arch/mips/include/asm/octeon/cvmx.h
patching file arch/mips/include/asm/octeon/pci-octeon.h
patching file arch/mips/include/asm/pgtable.h
patching file arch/mips/include/asm/r4kcache.h
patching file arch/mips/include/asm/spinlock.h
patching file arch/mips/kernel/entry.S
patching file arch/mips/kernel/smp-cps.c
patching file arch/mips/kernel/unaligned.c
patching file arch/mips/kvm/emulate.c
patching file arch/mips/kvm/mips.c
patching file arch/mips/kvm/trap_emul.c
patching file arch/mips/loongson/loongson-3/irq.c
patching file arch/mips/mm/cache.c
patching file arch/mips/mm/tlbex.c
patching file arch/mips/mti-malta/malta-memory.c
patching file arch/mips/netlogic/xlp/ahci-init-xlp2.c
patching file arch/mips/pci/Makefile
patching file arch/mips/pci/pci-octeon.c
patching file arch/mips/pci/pcie-octeon.c
patching file arch/mips/power/hibernate.S
patching file arch/mips/ralink/Kconfig
patching file arch/powerpc/kernel/cacheinfo.c
patching file arch/powerpc/mm/hugetlbpage.c
patching file arch/powerpc/perf/callchain.c
patching file arch/powerpc/platforms/cell/interrupt.c
patching file arch/powerpc/platforms/cell/iommu.c
patching file arch/powerpc/platforms/cell/spufs/sched.c
patching file arch/powerpc/platforms/powernv/pci-ioda.c
patching file arch/s390/kernel/suspend.c
patching file arch/s390/kvm/interrupt.c
patching file arch/s390/kvm/kvm-s390.h
patching file arch/s390/kvm/priv.c
patching file arch/x86/Kconfig
patching file arch/x86/Kconfig.cpu
patching file arch/x86/Makefile_32.cpu
patching file arch/x86/include/asm/insn.h
patching file arch/x86/include/asm/mwait.h
patching file arch/x86/include/asm/pvclock.h
patching file arch/x86/include/asm/spinlock.h
patching file arch/x86/kernel/acpi/boot.c
patching file arch/x86/kernel/apic/io_apic.c
patching file arch/x86/kernel/cpu/intel.c
patching file arch/x86/kernel/cpu/perf_event_intel_ds.c
patching file arch/x86/kernel/early_printk.c
patching file arch/x86/kernel/ioport.c
patching file arch/x86/kernel/process.c
patching file arch/x86/kernel/pvclock.c
patching file arch/x86/kvm/vmx.c
patching file arch/x86/kvm/x86.c
patching file arch/x86/lib/insn.c
patching file arch/x86/lib/usercopy_64.c
patching file arch/x86/pci/acpi.c
patching file arch/x86/platform/efi/early_printk.c
patching file arch/x86/tools/test_get_len
patching file arch/x86/vdso/vclock_gettime.c
patching file arch/xtensa/Kconfig
patching file arch/xtensa/include/uapi/asm/unistd.h
patching file arch/xtensa/platforms/iss/network.c
patching file arch/xtensa/platforms/xtfpga/Makefile
patching file arch/xtensa/platforms/xtfpga/include/platform/hardware.h
patching file arch/xtensa/platforms/xtfpga/include/platform/lcd.h
patching file arch/xtensa/platforms/xtfpga/lcd.c
patching file block/Kconfig.iosched
patching file block/Makefile
The next patch would create the file block/bfq-cgroup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-ioc.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-iosched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-sched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file block/blk-core.c
patching file block/blk-mq.c
patching file block/blk-sysfs.c
patching file drivers/accessibility/braille/braille_console.c
patching file drivers/acpi/acpi_pnp.c
patching file drivers/acpi/acpica/acmacros.h
patching file drivers/acpi/acpica/dsopcode.c
patching file drivers/acpi/acpica/evgpe.c
patching file drivers/acpi/acpica/evregion.c
patching file drivers/acpi/acpica/exdump.c
patching file drivers/acpi/acpica/exfldio.c
patching file drivers/acpi/acpica/exregion.c
patching file drivers/acpi/acpica/hwgpe.c
patching file drivers/acpi/acpica/hwvalid.c
patching file drivers/acpi/acpica/nsdump.c
patching file drivers/acpi/acpica/tbdata.c
patching file drivers/acpi/acpica/tbinstal.c
patching file drivers/acpi/acpica/tbprint.c
patching file drivers/acpi/acpica/tbxfroot.c
patching file drivers/acpi/acpica/utaddress.c
patching file drivers/acpi/blacklist.c
patching file drivers/acpi/resource.c
patching file drivers/acpi/sbs.c
patching file drivers/acpi/sbshc.c
patching file drivers/acpi/scan.c
patching file drivers/ata/acard-ahci.c
patching file drivers/ata/ahci.c
patching file drivers/ata/ahci.h
patching file drivers/ata/libahci.c
patching file drivers/ata/libahci_platform.c
patching file drivers/ata/libata-core.c
patching file drivers/ata/libata-eh.c
patching file drivers/ata/libata-pmp.c
patching file drivers/ata/libata-scsi.c
patching file drivers/ata/libata.h
patching file drivers/ata/sata_highbank.c
patching file drivers/base/bus.c
patching file drivers/base/cacheinfo.c
patching file drivers/base/platform.c
patching file drivers/block/loop.c
patching file drivers/block/rbd.c
patching file drivers/bluetooth/ath3k.c
patching file drivers/bluetooth/btusb.c
patching file drivers/char/tpm/tpm-chip.c
patching file drivers/clk/at91/clk-usb.c
patching file drivers/clk/qcom/clk-rcg.c
patching file drivers/clk/qcom/clk-rcg.h
patching file drivers/clk/qcom/clk-rcg2.c
patching file drivers/clk/qcom/gcc-ipq806x.c
patching file drivers/clk/qcom/lcc-ipq806x.c
patching file drivers/clk/samsung/clk-exynos4.c
patching file drivers/clk/tegra/clk-tegra124.c
patching file drivers/clk/tegra/clk.c
patching file drivers/cpufreq/cpufreq.c
patching file drivers/cpufreq/cpufreq_conservative.c
patching file drivers/cpufreq/cpufreq_ondemand.c
patching file drivers/cpufreq/intel_pstate.c
patching file drivers/crypto/omap-aes.c
patching file drivers/gpio/gpio-mvebu.c
patching file drivers/gpio/gpiolib-sysfs.c
patching file drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
patching file drivers/gpu/drm/drm_irq.c
patching file drivers/gpu/drm/exynos/exynos_dp_core.c
patching file drivers/gpu/drm/exynos/exynos_drm_fimd.c
The next patch would create the file drivers/gpu/drm/exynos/exynos_drm_fimd.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/gpu/drm/i2c/adv7511.c
patching file drivers/gpu/drm/i915/i915_drv.c
patching file drivers/gpu/drm/i915/i915_irq.c
patching file drivers/gpu/drm/i915/i915_reg.h
patching file drivers/gpu/drm/i915/intel_display.c
patching file drivers/gpu/drm/i915/intel_dp.c
patching file drivers/gpu/drm/i915/intel_i2c.c
patching file drivers/gpu/drm/i915/intel_lvds.c
patching file drivers/gpu/drm/radeon/atombios_crtc.c
patching file drivers/gpu/drm/radeon/atombios_encoders.c
patching file drivers/gpu/drm/radeon/dce6_afmt.c
patching file drivers/gpu/drm/radeon/evergreen_hdmi.c
patching file drivers/gpu/drm/radeon/r600_hdmi.c
patching file drivers/gpu/drm/radeon/radeon_asic.c
patching file drivers/gpu/drm/radeon/radeon_asic.h
patching file drivers/gpu/drm/radeon/radeon_audio.c
patching file drivers/gpu/drm/radeon/radeon_connectors.c
patching file drivers/gpu/drm/radeon/radeon_cs.c
patching file drivers/gpu/drm/radeon/radeon_ttm.c
patching file drivers/gpu/drm/radeon/radeon_uvd.c
patching file drivers/gpu/drm/radeon/radeon_vce.c
patching file drivers/gpu/drm/radeon/radeon_vm.c
patching file drivers/gpu/drm/radeon/rv770d.h
patching file drivers/gpu/drm/radeon/si_dpm.c
patching file drivers/gpu/drm/radeon/uvd_v1_0.c
patching file drivers/gpu/drm/radeon/uvd_v2_2.c
patching file drivers/hid/Kconfig
patching file drivers/hid/Makefile
patching file drivers/hid/hid-ids.h
patching file drivers/hid/hid-multitouch.c
The next patch would create the file drivers/hid/huiontablet.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/hid/usbhid/hid-quirks.c
patching file drivers/hv/channel.c
patching file drivers/hv/channel_mgmt.c
patching file drivers/i2c/busses/i2c-rk3x.c
patching file drivers/i2c/i2c-core.c
patching file drivers/i2c/i2c-mux.c
patching file drivers/idle/intel_idle.c
patching file drivers/infiniband/core/cma.c
patching file drivers/infiniband/core/umem.c
patching file drivers/infiniband/hw/mlx4/qp.c
patching file drivers/infiniband/ulp/iser/iser_initiator.c
patching file drivers/infiniband/ulp/isert/ib_isert.c
patching file drivers/input/input-mt.c
patching file drivers/input/joydev.c
patching file drivers/input/mouse/alps.c
patching file drivers/input/mouse/elantech.c
patching file drivers/input/mouse/elantech.h
patching file drivers/input/mouse/synaptics.c
patching file drivers/input/mouse/synaptics.h
patching file drivers/macintosh/Kconfig
patching file drivers/macintosh/adbhid.c
patching file drivers/md/md.c
patching file drivers/md/raid0.c
patching file drivers/media/platform/marvell-ccic/mcam-core.c
patching file drivers/media/platform/marvell-ccic/mcam-core.h
patching file drivers/media/rc/img-ir/img-ir-core.c
patching file drivers/media/usb/stk1160/stk1160-v4l.c
patching file drivers/memstick/core/mspro_block.c
patching file drivers/mfd/mfd-core.c
patching file drivers/mmc/card/block.c
patching file drivers/mmc/card/queue.c
patching file drivers/mmc/card/queue.h
patching file drivers/mmc/core/core.c
patching file drivers/mmc/host/sh_mmcif.c
patching file drivers/mmc/host/sunxi-mmc.c
patching file drivers/mmc/host/tmio_mmc_pio.c
patching file drivers/mtd/ubi/attach.c
patching file drivers/mtd/ubi/cdev.c
patching file drivers/mtd/ubi/eba.c
patching file drivers/mtd/ubi/wl.c
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
patching file drivers/net/ethernet/cadence/macb.c
patching file drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
patching file drivers/net/ethernet/intel/e1000/e1000_main.c
patching file drivers/net/ethernet/marvell/pxa168_eth.c
patching file drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
patching file drivers/net/ethernet/mellanox/mlx4/en_netdev.c
patching file drivers/net/ethernet/mellanox/mlx4/en_rx.c
patching file drivers/net/ethernet/mellanox/mlx4/en_tx.c
patching file drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
patching file drivers/net/netconsole.c
patching file drivers/net/ppp/ppp_generic.c
patching file drivers/net/vxlan.c
patching file drivers/net/wireless/hostap/hostap.h
patching file drivers/net/wireless/hostap/hostap_ap.c
patching file drivers/net/wireless/hostap/hostap_config.h
patching file drivers/net/wireless/hostap/hostap_hw.c
patching file drivers/net/wireless/hostap/hostap_info.c
patching file drivers/net/wireless/hostap/hostap_ioctl.c
patching file drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
patching file drivers/net/wireless/ti/wl18xx/debugfs.c
patching file drivers/net/wireless/ti/wlcore/debugfs.h
patching file drivers/nfc/st21nfcb/i2c.c
patching file drivers/pinctrl/core.c
patching file drivers/pinctrl/core.h
patching file drivers/pinctrl/devicetree.c
patching file drivers/platform/x86/Kconfig
patching file drivers/platform/x86/Makefile
patching file drivers/platform/x86/compal-laptop.c
patching file drivers/platform/x86/hdaps.c
The next patch would create the file drivers/platform/x86/thinkpad_ec.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/platform/x86/tp_smapi.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/power/ipaq_micro_battery.c
patching file drivers/power/lp8788-charger.c
patching file drivers/power/twl4030_madc_battery.c
patching file drivers/rtc/rtc-armada38x.c
patching file drivers/scsi/3w-9xxx.c
patching file drivers/scsi/3w-9xxx.h
patching file drivers/scsi/3w-sas.c
patching file drivers/scsi/3w-sas.h
patching file drivers/scsi/3w-xxxx.c
patching file drivers/scsi/3w-xxxx.h
patching file drivers/scsi/megaraid/megaraid_sas_fusion.c
patching file drivers/scsi/mvsas/mv_sas.c
patching file drivers/scsi/scsi_devinfo.c
patching file drivers/scsi/scsi_scan.c
patching file drivers/scsi/sd.c
patching file drivers/scsi/sd_dif.c
patching file drivers/scsi/storvsc_drv.c
patching file drivers/spi/spi-imx.c
patching file drivers/spi/spidev.c
patching file drivers/ssb/Kconfig
patching file drivers/staging/Kconfig
patching file drivers/staging/Makefile
patching file drivers/staging/android/sync.c
patching file drivers/staging/panel/panel.c
The next patch would create the file drivers/staging/vhba/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/vhba.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/staging/vt6655/rxtx.c
patching file drivers/target/iscsi/iscsi_target.c
patching file drivers/target/iscsi/iscsi_target_erl0.c
patching file drivers/target/iscsi/iscsi_target_login.c
patching file drivers/target/target_core_file.c
patching file drivers/target/target_core_sbc.c
patching file drivers/target/target_core_transport.c
patching file drivers/tty/Kconfig
patching file drivers/tty/hvc/hvc_xen.c
patching file drivers/tty/serial/8250/8250_core.c
patching file drivers/tty/serial/8250/8250_dw.c
patching file drivers/tty/serial/8250/8250_early.c
patching file drivers/tty/serial/atmel_serial.c
patching file drivers/tty/serial/imx.c
patching file drivers/tty/serial/of_serial.c
patching file drivers/tty/serial/uartlite.c
patching file drivers/tty/serial/xilinx_uartps.c
patching file drivers/tty/vt/vt.c
patching file drivers/usb/chipidea/otg_fsm.c
patching file drivers/usb/class/cdc-acm.c
patching file drivers/usb/class/cdc-wdm.c
patching file drivers/usb/core/hub.c
patching file drivers/usb/dwc2/hcd.c
patching file drivers/usb/gadget/legacy/printer.c
patching file drivers/usb/host/ehci-hcd.c
patching file drivers/usb/host/ehci-hub.c
patching file drivers/usb/host/fotg210-hcd.c
patching file drivers/usb/host/fusbh200-hcd.c
patching file drivers/usb/host/isp116x-hcd.c
patching file drivers/usb/host/oxu210hp-hcd.c
patching file drivers/usb/host/r8a66597-hcd.c
patching file drivers/usb/host/sl811-hcd.c
patching file drivers/usb/host/uhci-hub.c
patching file drivers/usb/host/xhci-ring.c
patching file drivers/usb/isp1760/isp1760-hcd.c
patching file drivers/usb/musb/musb_core.c
patching file drivers/usb/musb/musb_virthub.c
patching file drivers/usb/phy/phy.c
patching file drivers/usb/storage/uas-detect.h
patching file drivers/usb/storage/uas.c
patching file drivers/usb/storage/usb.c
patching file drivers/vfio/vfio.c
patching file drivers/video/logo/Kconfig
patching file drivers/video/logo/Makefile
patching file drivers/video/logo/logo.c
The next patch would create the file drivers/video/logo/logo_arch_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_bsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_debian_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_exherbo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fbsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedoraglossy_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedorasimple_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_gentoo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_oldzen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_slackware_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_tits_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_zen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/xen/events/events_2l.c
patching file drivers/xen/events/events_base.c
patching file drivers/xen/xen-pciback/conf_space.c
patching file drivers/xen/xen-pciback/conf_space.h
patching file drivers/xen/xen-pciback/conf_space_header.c
patching file drivers/xen/xenbus/xenbus_probe.c
patching file fs/Kconfig
patching file fs/Makefile
The next patch would create the file fs/aufs/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/aufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/export.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/f_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fhsm.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/finfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fstype.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsplus.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_add.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_del.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_ren.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/iinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/ioctl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/magic.mk,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/mvdown.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/plink.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/poll.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/posix_acl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/procfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rdu.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rwsem.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sbinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/spl.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysrq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vdir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wbr_policy.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xattr.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xino.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file fs/binfmt_elf.c
patching file fs/btrfs/extent-tree.c
patching file fs/btrfs/ioctl.c
patching file fs/btrfs/send.c
patching file fs/btrfs/xattr.c
patching file fs/buffer.c
patching file fs/coredump.c
patching file fs/dcache.c
patching file fs/exec.c
patching file fs/ext4/extents.c
patching file fs/ext4/extents_status.c
patching file fs/ext4/inode.c
patching file fs/ext4/namei.c
patching file fs/file_table.c
patching file fs/hfsplus/xattr.c
patching file fs/inode.c
patching file fs/lockd/svcsubs.c
patching file fs/namei.c
patching file fs/namespace.c
patching file fs/nfs/callback.c
patching file fs/nfs/direct.c
patching file fs/nfs/nfs4xdr.c
patching file fs/nfs/read.c
patching file fs/nfs/write.c
patching file fs/nfsd/nfs4proc.c
patching file fs/nfsd/nfs4state.c
patching file fs/nfsd/nfs4xdr.c
patching file fs/nfsd/nfsctl.c
patching file fs/nfsd/nfsd.h
patching file fs/nilfs2/btree.c
patching file fs/notify/group.c
patching file fs/notify/mark.c
patching file fs/ocfs2/dlm/dlmmaster.c
patching file fs/open.c
patching file fs/pnode.c
patching file fs/pnode.h
patching file fs/proc/base.c
patching file fs/proc/nommu.c
patching file fs/proc/task_mmu.c
patching file fs/proc/task_nommu.c
patching file fs/splice.c
patching file fs/xattr.c
patching file include/acpi/acconfig.h
patching file include/acpi/acpixf.h
patching file include/acpi/actypes.h
patching file include/acpi/platform/acenv.h
patching file include/dt-bindings/clock/tegra124-car-common.h
patching file include/linux/bpf.h
patching file include/linux/cgroup_subsys.h
patching file include/linux/console.h
patching file include/linux/file.h
patching file include/linux/init_task.h
patching file include/linux/ioprio.h
patching file include/linux/jiffies.h
patching file include/linux/libata.h
patching file include/linux/linux_logo.h
patching file include/linux/mm.h
patching file include/linux/mm_types.h
patching file include/linux/mount.h
patching file include/linux/nilfs2_fs.h
patching file include/linux/sched.h
patching file include/linux/sched/prio.h
patching file include/linux/skbuff.h
patching file include/linux/splice.h
The next patch would create the file include/linux/thinkpad_ec.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/linux/usb.h
patching file include/linux/usb_usual.h
patching file include/scsi/scsi_devinfo.h
patching file include/sound/emu10k1.h
patching file include/sound/soc-dapm.h
patching file include/target/iscsi/iscsi_target_core.h
patching file include/target/target_core_base.h
The next patch would create the file include/trace/events/fs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/Kbuild
The next patch would create the file include/uapi/linux/aufs_type.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/nfsd/debug.h
patching file include/uapi/linux/sched.h
patching file include/uapi/linux/vt.h
patching file include/video/samsung_fimd.h
patching file init/Kconfig
patching file init/main.c
patching file kernel/bpf/core.c
patching file kernel/bpf/verifier.c
patching file kernel/debug/kdb/kdb_io.c
patching file kernel/delayacct.c
patching file kernel/exit.c
patching file kernel/fork.c
patching file kernel/printk/printk.c
patching file kernel/ptrace.c
patching file kernel/sched/Makefile
The next patch would create the file kernel/sched/bfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file kernel/sched/bfs_sched.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file kernel/sched/core.c
patching file kernel/sched/deadline.c
patching file kernel/sched/fair.c
patching file kernel/sched/idle.c
patching file kernel/sched/stats.c
patching file kernel/stop_machine.c
patching file kernel/sysctl.c
patching file kernel/time/Kconfig
patching file kernel/time/posix-cpu-timers.c
patching file kernel/trace/ring_buffer.c
patching file kernel/trace/trace_events.c
patching file kernel/trace/trace_functions_graph.c
patching file kernel/trace/trace_selftest.c
patching file lib/Kconfig.debug
patching file lib/string.c
patching file mm/Makefile
patching file mm/filemap.c
patching file mm/huge_memory.c
patching file mm/hugetlb.c
patching file mm/madvise.c
patching file mm/memory-failure.c
patching file mm/memory.c
patching file mm/mempolicy.c
patching file mm/mmap.c
patching file mm/msync.c
patching file mm/nommu.c
patching file mm/page-writeback.c
The next patch would create the file mm/prfile.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file net/bridge/br_netfilter.c
patching file net/core/dev.c
patching file net/core/skbuff.c
patching file net/ethernet/eth.c
patching file net/ipv4/Kconfig
patching file net/ipv4/geneve.c
patching file net/ipv4/ip_forward.c
patching file net/ipv4/ping.c
patching file net/ipv4/route.c
patching file net/ipv4/tcp_output.c
patching file net/mac80211/mlme.c
patching file net/netlink/af_netlink.c
patching file scripts/mkcompile_h
patching file security/commoncap.c
patching file security/device_cgroup.c
patching file security/security.c
patching file sound/oss/sequencer.c
patching file sound/pci/emu10k1/emu10k1.c
patching file sound/pci/emu10k1/emu10k1_callback.c
patching file sound/pci/emu10k1/emu10k1_main.c
patching file sound/pci/emu10k1/emupcm.c
patching file sound/pci/emu10k1/emuproc.c
patching file sound/pci/emu10k1/memory.c
patching file sound/pci/hda/hda_codec.c
patching file sound/pci/hda/patch_realtek.c
patching file sound/pci/hda/thinkpad_helper.c
patching file sound/soc/codecs/cs4271.c
patching file sound/soc/codecs/pcm512x.c
patching file sound/soc/codecs/rt5677.c
patching file sound/soc/codecs/tfa9879.c
patching file sound/soc/codecs/wm8741.c
patching file sound/soc/davinci/davinci-evm.c
patching file sound/soc/samsung/s3c24xx-i2s.c
patching file sound/synth/emux/emux_oss.c
patching file sound/synth/emux/emux_seq.c
patching file sound/usb/quirks.c
patching file tools/lib/traceevent/kbuffer-parse.c
patching file tools/perf/config/Makefile
patching file tools/perf/tests/make
patching file tools/perf/util/cloexec.c
patching file tools/perf/util/cloexec.h
patching file tools/perf/util/symbol-elf.c
patching file tools/power/x86/turbostat/Makefile
patching file virt/kvm/arm/vgic.c
patching file virt/kvm/kvm_main.c
==> ERROR: A failure occurred in prepare().
Aborting...
Last edited by MrEvilBreakfast (2015-05-24 17:08:08)
Maybe you are looking for
-
HT1349 I have two Apple itunes accounts and I want to merge them in to one.
I have two Apple itunes accounts and I want to merge them in to one. How do I do this.
-
Request for New Features in Adobe Application Manager
Creative Cloud has been around for a year now and Adobe Application Manager has been the tool to update and download new apps. AAM works fine but, it's so minimal, ever since then I've been waiting for Adobe to release a more useful version. Here are
-
Export Dataview webpart using the listURL property
I have a data view webpart (dataform) on a page. I have to package the webpart into a solution so I exported the webpart using the sharepoint designer but figured that the webpart is connected to a list by the list id. I wish to use list url instead
-
RFx Response Required for All Items
Hi Team Kindly we use SRM 7 EHP1 with business scenario ( Extend Classic Scenario ) IN Restricted RFx Item level there are checkbox ( RFx Response Required for All Items ) We use it but does not work I do not know why ? any help from you ?
-
I purchased an iPhone 4s few weeks ago here in Pakistan and now I can't activate it because it says the this iPhone was lost and erased. Sign is with the Apple ID that was used to erase this iPhone. What do I do now? because I contacted the Owner but