[solved] Issue installing tp_smapi
Since recently, I am having problem when I try to install tp_smapi from AUR. Here's the issue:
==> Building and installing package
/tmp/yaourt-tmp-juha/aur-tp_smapi-pf/./PKGBUILD: line 14: /lib/modules//usr/lib/modules/extramodules-3.4-pf/version: No such file or directory
==> ERROR: An unknown error has occurred. Exiting...
/usr/lib/yaourt/pkgbuild.sh: line 200: 4269 User defined signal 1 PKGDEST="$YPKGDEST" makepkg "${MAKEPKG_ARG[@]}" -s -f -p ./PKGBUILD
==> ERROR: Makepkg was unable to build tp_smapi-pf.
desk
Last edited by Lockheed (2012-07-17 08:21:21)
Things like this is probably better suited for the comments section in the AUR package.
I had a problem installing it earlier because I tried to reinstall tm_smapi before dealing with the glibc and /lib issue. I don't know if that's any related to your problem though.
Similar Messages
-
[Solved] Issue installing wine from the official repositories.
I'm trying to install wine, but upon running
$ sudo pacman -S wine
it returns
error: target not found wine
and If I try PlayOnLinux with
$ sudo pacman -S playonlinux
it returns
warning, cannot resolve "wine", a dependency of playonlinux
Wine should still be in the official repositories, and my research has turned up nothing for this issue. Actually I'm not even sure if this is happening to anyone other than me?
Thanks,
Shane
P.S.
I'm new to the forums, so hopefully I posted this properly, and in the right place.
Last edited by ShaneHutter (2015-06-18 07:04:38)thoffmeyer wrote:run a "pacman -Syy" to force refresh the package databases.
Probably best to use:
# pacman -Syyu
https://wiki.archlinux.org/index.php/Pa … nsupported
EDIT: @OP: Enable [Multilib] in pacman.conf and then run:
# pacman -Syyu wine
Last edited by Head_on_a_Stick (2015-06-18 06:38:39) -
[SOLVED] Issues Installing Hauppauge HVR2200
Hi,
I am trying to get a Hauppauge HVR2200 working in my system but am having some issues.
I currently have this output when running dmesg:
[ 4.191023] Linux video capture interface: v2.00
[ 4.252802] saa7164 driver loaded
[ 4.252885] saa7164 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.254783] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge WinTV-HVR2200 [card=4,insmod option]
[ 4.254788] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0xf9000000
[ 4.254795] saa7164 0000:03:00.0: setting latency timer to 64
[ 4.264786] ppdev: user-space parallel port driver
[ 4.339942] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.339947] hda_intel: Disabling MSI
[ 4.339988] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.393341] saa7164_downloadfirmware() no first image
[ 4.393405] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
[ 4.407060] saa7164_downloadfirmware() Upload failed. (file not found?)
[ 4.407115] Failed to boot firmware, no features registered
I have followed the guide from here http://linuxtv.org/wiki/index.php/Haupp … V-HVR-2200 Running this part cp *fw /lib/firmware/`uname -r` gives me an error.
But I am not sure how what to do now to get it working. Any help greatly appreciated.
http://linuxtv.org/wiki/index.php/Haupp … V-HVR-2200
Last edited by morphjk (2011-10-08 02:08:26)the sad clown wrote:
Then you don't need to do
cp *fw /lib/firmware/`uname -r`
Just skip it and go onto the next step. The error message says it can't find your firmware, so perhaps the conflicting commands messed this up for you.
I actually get an error running the above command.
[root@media ~]# cp *fw /lib/firmware/`uname -r`
cp: target `/lib/firmware/3.0-ARCH' is not a directory
Do you mean to go on with this part?:
git clone git://linuxtv.org/media_build.git
cd media_build
./build.sh
I was of the belief that driver was already in the kernel (sorry I'm still a newbie to Linux)
Last edited by morphjk (2011-09-16 07:18:36) -
[SOLVED] /home not mounted on boot after installing tp_smapi
Hi. After installing tp_smapi, my /home partition isn't mounted on boot any more.
I can log in as a normal user, but I am then left with a command line and thus need to mount /home manually and launch X/dwm with startx. The startup shell shows no error messages.
After I uninstall tp_smapi, X starts up automatically again and everything seems to work.
Here's my fstab:
/dev/sda2 / ext4 rw,noatime,data=ordered 0 1
# /dev/sda4 UUID=9d976c9a-4fe2-4cc9-a8b9-c22c713149d7
/dev/sda4 /home ext4 rw,noatime,data=ordered 0 2
# /dev/sda3 UUID=a6153a96-b9ef-412f-a670-af6775275f15
/dev/sda3 none swap defaults 0 0
I am dual-booting Arch with Windows XP on a Thinkpad X60s. A /mnt/home folder also exists. And, the error aside, tp_smapi seems to work nicely,
Thanks for any help!
Last edited by marttt (2013-06-01 20:59:55)Okay, it works now (after creating /mnt/home anew and rebooting). However, I wonder why did tp_smapi touch my mount points in the first place?
Last edited by marttt (2013-05-31 20:46:09) -
I have uninstalled and reinstalled a number of times, but I still have the same issue. Adobe automatically gives me the Norwegian version as I live in Norway. When I open existing pdf files they appear empty, and automatically close themselves after a few seconds.
Any idea how I can solve this problem?
Your input is highly appreciated!
Thank you.
RThank you so much for your swift response, Pat! The first step – accepting the Eula license agreement solved my problem ☺ ☺ ☺
Wish you a great day – you just helped making mine a lot better!
Randi
Fra: Pat Willener [email protected]
Sendt: 27. august 2013 09:09
Til: Randi Hognestad
Emne: Issue: installed Adobe Reader XI, Norwegian version, existing pdf will not open or appear empty
Re: Issue: installed Adobe Reader XI, Norwegian version, existing pdf will not open or appear empty
created by Pat Willener<http://forums.adobe.com/people/pwillener> in Adobe Reader - View the full discussion<http://forums.adobe.com/message/5629375#5629375 -
Having issues installing Laserjet 2250n on Windows XP
Hi,
I am having issues installing my HP Laserjet 2250n on my computer running Windows XP. I have downloaded a number of drivers from the HP site (listed below) and each time i try to install through windows new hardware wizard, it gives me a message telling me that the required software is not installed. I have tried installing Easy Printer Care software and then tried installing the driver but no luck either. It would help if the website mentions which driver is required for basic printing rather than showing multiple other drivers for other purposes which confuses people.
Also, I tried logging a support case through the HP website and it is not recognising my serial number. This is very annoying since I can not log a case without entering the serial number. I have checked 5 times on the printer to ensure I am reading the serial number correctly, and the sticker does clearly mention serial number so i am reading the correct number.
Please assist with this issue. Thanks.
Website HP driver site:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheT...HPuser5647,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Issue installing System Update 5.01
Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your timeI had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too! -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
Issue installing/upgrading to ITunes 10.6.1.7
Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).
Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
MarilynHey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling -
Issue installing Photoshop Camera Raw 6.7
Hi guys,
I having issues installing Photoshop Camera Raw 6.7. I gt this error "Photoshop Camera Raw 6.7 Update Other processes are running which conflict with update installation. Please close them and try again. Error Code: U45M1P19". I restart the Computer (Windows 7) and closed all Adobe programs but the problem persist. Any ideas...
Thanks in advance!
P.S. I have Adobe Design Premium CS5.5I have exactly the same issue and error number. The only difference is that I am running a Mac with OS X10.8.2
I also tried installing Camera Raw 7.1 and that did not work either.
I downloaded the Adobe Support manager and it reported everything as OK.
I have tried rebooting, turning off all apps. Nothing seems to fix this.
Any clues on what might be the problem and how to fix.
The reason I need the update is that I am using LR4 and want to edit in Photoshop CS 5.5 and it tells me I need to update my Camera raw. -
I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs -
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I tried to send a photo on my phone in a chat message. The photo locked up. I can't get back to photo stream. How do I restart phone or solve issue otherwise.
More than likely you can get the phone back by doing a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
-
Issue installing Client 9.2.0.1
Oracle rookie here having an issue installing Client 9.2.0.1....
I've installed the client software on a few machines without any issue. Now, I am installing it on the passive node of a cluster (cluster is running SQL Server 2000) and there is a problem. The install was successful once, until I noticed it installed under D:\oracle\ora92. I needed to install it on C, because that's where I installed it on the active node. However, when I run the installer (C:\9.2.0.1 Client\autorun\autorun.exe), it does not allow me to change the path or the name. If I change the Path to be be C:\oracle\ora92, the name (OraName92, in this case) goes away. If I retype OraName92 in the name box, the path goes back to D:\oracle\ora92.
I tried altering some ini files and that didn't work. I searched the registry and there are tons of references to the old install paths, but even changing some registry settings (specifically, HKLM\Software\Oracle\ORACLE_HOME and ORACLE_HOME_NAME) did not work. I didn't touch any other keys, but I did back up the registry.
Anyone have any thoughts on how I can get this installed on C? Thanks...
PeterJust for giggles, I tried altering the following registry key:
HKLM\Software\Oracle\ALL_HOMES\ID0\Path
The value used to be D:\oracle\ora92, and I changed it to C:\oracle\ora92. When I start the installer program, it picks it up as the value for OraHome92. I have nothing to lose by trying this, but my only question would be, will the installer overwrite the existing keys in the registry? I'm hoping that's what it will do, because I don't want any stray references to D:\oracle\ora92 lying around.
If anyone knows anything about this, please let me know. Thanks for all your help!
Peter
Maybe you are looking for
-
ITunes 7.6 keeps pausing in Tiger
I haven't upgraded to Leopard. I'm at 10.4.11 and have 2GB of Ram in my Titanium Powerbk G4. I did upgrade to iTunes 7.6 and QT 7.4 yesterday. When playing back music, (with my Powerbk plugged in) songs will often pause - I don't know the songs well
-
What is the difference between "System" buttons and boolean buttons?
I'm writing a VI with an event structure that allows me to push different buttons to control external instruments, but I found two types of buttons worked: "System" buttons and "Boolean" buttons. On the surface, the functionality seems the same: I ca
-
InDesign CS4 - Paragraph Style - Justification not applying
Hello, I am in college and Indesign is the software we use for our projects. The version we have is CS4. This is the second project where I've had an issue with the justification. I can use the justification icons at the top to move the text where
-
Acrobat adobe reader 8.1 is availaible
Hello, Acrobat adobe reader 8.1 is availaible. A list of new features and fixed bugs is contained in the link below: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401732&sliceId=1 Have you any ideas, which new features and fixed bugs in
-
Forms 6i/9i with Oracle 9i in Character mode
I want to check to deploy forms 6i/9i with Oracle 9i OS will be IBM-AIX. Whether is it possible to execute the forms on server itself in character mode ? Thakns Dilip Patel.