[Solved] iwlwifi very unstable after 3.4 upgrade (Centrino 1030 BGN)

Since the 3.4 kernel upgrade my wireless (iwlwifi, Intel Centrino-N 1030) has been extremely unstable and essentially unusable. There have been reports of problems on Intel 6x00 wifi cards, but I've not seen any on the 1030. I've tested this on 3.4.2 and 3.4.3.
The current workaround is to stay on 3.3.x kernel. A dmesg log is included below. It shows "Queue 2 stuck" and a firmware reload.
$ dmesg | grep iwl
[    3.006555] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[    3.006557] iwlwifi 0000:09:00.0: pci_resource_base = ffffc900050b8000
[    3.006558] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[    3.006644] iwlwifi 0000:09:00.0: irq 49 for MSI/MSI-X
[    3.049251] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1
[    3.049511] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    3.049513] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    3.049516] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.049518] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[    3.049520] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[    3.049523] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[    3.049582] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[    3.065387] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[    3.065392] iwlwifi 0000:09:00.0: Device SKU: 0x150
[    3.065395] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[    3.065417] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[    3.081022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.781462] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[    6.788151] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1
[    6.872549] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[    6.879316] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1
[  718.479232] iwlwifi 0000:09:00.0: Queue 2 stuck for 10000 ms.
[  718.479236] iwlwifi 0000:09:00.0: Current SW read_ptr 223 write_ptr 235
[  718.479265] iwlwifi 0000:09:00.0: Current HW read_ptr 223 write_ptr 235
[  718.479267] iwlwifi 0000:09:00.0: On demand firmware reload
[  718.479665] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[  718.486377] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1
$
Last edited by mervinb (2012-06-24 05:48:00)

I tried testing/linux-3.4.4-1, and the problem appears fixed.
There's a fix for in 3.4.4 for iwlwifi firmware version for 6000g2 (which is what the 1030 card uses). Marking as solved.

Similar Messages

  • IPAD2 very slow after IOS 8 upgrade

    After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load  very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
    Who can I solve this problem? Any workaround?
    PD
    Apple should better test the software before delivering.
    Thanks.

    Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
    EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
    Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
    Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
    Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
    Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
    Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
    Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
    And that's just the annoying ones....

  • [SOLVED] Getting theme errors after a recent upgrade in gtk3 apps

    I have recently started getting errors like these after a recent upgrade.
    (nautilus:12329): Gtk-WARNING **: Theme parsing error: *-*:*:*: Not using units is deprecated. Assuming 'px'.
    Full error while opening nautilus can be see here. http://sprunge.us/IQOM
    Relevant pacman log: http://sprunge.us/YYgY
    ~/.config/gtk-3.0/settings.ini :  http://sprunge.us/VJMT
    I have tried few themes (Fear, Hope, Aldabra), all seem to give me this error. Also, theme Fear broke (gave white text with white background) after the upgrade.
    Can anyone else reproduce this error?
    If there is any theme that doesn't have problems with updated system, please share.
    Last edited by shadyabhi (2012-04-28 02:41:54)

    shadyabhi wrote:Can anyone else reproduce this error?
    Apparently yes:
    https://bbs.archlinux.org/viewtopic.php?id=140402
    https://bbs.archlinux.org/viewtopic.php?id=140277
    There are a couple other threads as well - some have alleged solutions, or at least some themes that work.

  • [SOLVED] system very slow after upgrade

    I did today pacman -Syu after some time. I have Dell D630 laptop, Core 2 Duo 2x1.8GHz, 2GB RAM, VGA: Intel X3100. Now the whole system is really slow. I mean REALLY slow. Even opening terminal (urxvt) takes time. Browsing is slow. Mplayer can not handle 720p .mkv playback enymore. cpufreq-info shows both cores uses max. 1.8 GHz  frequency under load. I tried top/htop/atop/iotop/powertop but found no suspicious process eating resources. Messages from error.log:
    Mar 29 23:16:05 tortuga kernel: ata4.01: failed to resume link (SControl 0)
    Mar 29 23:16:05 tortuga kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
    Mar 29 23:16:05 tortuga kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
    Mar 29 23:16:05 tortuga kernel: vboxdrv: the usage of hardware performance counters by
    Mar 29 23:16:05 tortuga kernel: vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
    I googled botth messages and as far as I can understand they are not source/symptom of my slowness.
    If anybody have hint where to search, any advice will be really helpfull, because I am truly lost...
    dmesg
    # dmesg
    Linux version 2.6.32-ARCH (thomas@evey) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f680400 (usable)
    BIOS-e820: 000000007f680400 - 0000000080000000 (reserved)
    BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
    BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    DMI 2.4 present.
    last_pfn = 0x7f680 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-EFFFF uncachable
    F0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 07F800000 mask FFF800000 uncachable
    2 base 07F700000 mask FFFF00000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 0000000000100000 - 000000007f680400 (usable)
    modified: 000000007f680400 - 0000000080000000 (reserved)
    modified: 00000000f8000000 - 00000000fc000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed18000 - 00000000fed1c000 (reserved)
    modified: 00000000fed20000 - 00000000fed90000 (reserved)
    modified: 00000000feda0000 - 00000000feda6000 (reserved)
    modified: 00000000fee00000 - 00000000fee10000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 7000-c000
    RAMDISK: 7f363000 - 7f66fa7a
    Allocated new RAMDISK: 00100000 - 0040ca7a
    Move RAMDISK from 000000007f363000 - 000000007f66fa79 to 00100000 - 0040ca79
    ACPI: RSDP 000fbb00 00024 (v02 DELL )
    ACPI: XSDT 7f681e00 00064 (v01 DELL M08 27D70717 ASL 00000061)
    ACPI: FACP 7f681c9c 000F4 (v04 DELL M08 27D70717 ASL 00000061)
    ACPI: DSDT 7f682400 0613B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
    ACPI: FACS 7f690c00 00040
    ACPI: HPET 7f681f00 00038 (v01 DELL M08 00000001 ASL 00000061)
    ACPI: APIC 7f682000 00068 (v01 DELL M08 27D70717 ASL 00000047)
    ACPI: ASF! 7f681c00 0007E (v32 DELL M08 27D70717 ASL 00000061)
    ACPI: MCFG 7f681fc0 0003E (v16 DELL M08 27D70717 ASL 00000061)
    ACPI: SLIC 7f68209c 00024 (v01 DELL M08 27D70717 ASL 00000061)
    ACPI: TCPA 7f682300 00032 (v01 00000000 ASL 00000000)
    ACPI: SSDT 7f680731 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    1150MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00008000 - 0000ef00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024]
    #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #5 [0001530000 - 0001536188] BRK ==> [0001530000 - 0001536188]
    #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    #7 [0000100000 - 000040ca7a] NEW RAMDISK ==> [0000100000 - 000040ca7a]
    #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f680
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0007f680
    On node 0 totalpages: 521755
    free_area_init_node: node 0, pgdat c13dbe60, node_mem_map c1538000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3963 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2302 pages used for memmap
    HighMem zone: 292228 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
    Booting paravirtualized kernel on bare hardware
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34680 r0 d22664 u2097152
    pcpu-alloc: s34680 r0 d22664 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677
    Kernel command line: root=/dev/group1/arch ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Initializing HighMem for node 0 (000377fe:0007f680)
    Memory: 2060220k/2087424k available (2797k kernel code, 25764k reserved, 1185k data, 412k init, 1178120k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc13e4000 - 0xc144b000 ( 412 kB)
    .data : 0xc12bb55a - 0xc13e3a08 (1185 kB)
    .text : 0xc1000000 - 0xc12bb55a (2797 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Fast TSC calibration using PIT
    Detected 1795.296 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.20 BogoMIPS (lpj=5984320)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20090903
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (7184.82 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    PCI: MCFG area at f8000000 reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 7f690c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
    pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
    pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
    pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
    pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
    pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
    pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
    pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
    pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
    pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
    pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
    pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
    pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef]
    pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbf00-0xfe9fbfff]
    pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
    pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8ff000-0xfe8fffff]
    pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:0c:00.0: PME# disabled
    pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
    pci 0000:09:00.0: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff]
    pci 0000:09:00.0: PME# supported from D3hot D3cold
    pci 0000:09:00.0: PME# disabled
    pci 0000:00:1c.5: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
    pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
    pci 0000:03:01.0: supports D1 D2
    pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.0: PME# disabled
    pci 0000:03:01.4: reg 10 32bit mmio: [0xfe6ff000-0xfe6fffff]
    pci 0000:03:01.4: reg 14 32bit mmio: [0xfe6fe800-0xfe6fefff]
    pci 0000:03:01.4: supports D1 D2
    pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.4: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:05: ioport range 0xc80-0xcaf has been reserved
    system 00:05: ioport range 0xcc0-0xcff could not be reserved
    system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:0a: ioport range 0xcb0-0xcbb has been reserved
    system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
    system 00:0b: ioport range 0x900-0x97f has been reserved
    system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0c: ioport range 0xf400-0xf4fe has been reserved
    system 00:0c: ioport range 0x1080-0x10bf has been reserved
    system 00:0c: ioport range 0x10c0-0x10df has been reserved
    system 00:0c: ioport range 0x809-0x809 has been reserved
    system 00:0d: iomem range 0x0-0x9efff could not be reserved
    system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved
    system 00:0d: iomem range 0x7f680400-0x7f6fffff has been reserved
    system 00:0d: iomem range 0x7f700000-0x7f7fffff has been reserved
    system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
    system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
    system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
    system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
    system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
    system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
    system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
    system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
    system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
    system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
    system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
    pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    pci 0000:00:1c.0: MEM window: 0x84000000-0x841fffff
    pci 0000:00:1c.0: PREFETCH window: 0x00000084200000-0x000000843fffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
    pci 0000:00:1c.1: PREFETCH window: 0x00000084400000-0x000000845fffff
    pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
    pci 0000:00:1c.5: IO window: 0x4000-0x4fff
    pci 0000:00:1c.5: MEM window: 0xfe700000-0xfe7fffff
    pci 0000:00:1c.5: PREFETCH window: 0x00000084600000-0x000000847fffff
    pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
    pci 0000:03:01.0: IO window: 0x005000-0x0050ff
    pci 0000:03:01.0: IO window: 0x005400-0x0054ff
    pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
    pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:1e.0: IO window: 0x5000-0x5fff
    pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
    pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:03:01.0: enabling device (0000 -> 0003)
    pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:0b: resource 1 mem: [0x84000000-0x841fffff]
    pci_bus 0000:0b: resource 2 pref mem [0x84200000-0x843fffff]
    pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
    pci_bus 0000:0c: resource 2 pref mem [0x84400000-0x845fffff]
    pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:09: resource 1 mem: [0xfe700000-0xfe7fffff]
    pci_bus 0000:09: resource 2 pref mem [0x84600000-0x847fffff]
    pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff]
    pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
    pci_bus 0000:03: resource 3 io: [0x00-0xffff]
    pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:04: resource 0 io: [0x5000-0x50ff]
    pci_bus 0000:04: resource 1 io: [0x5400-0x54ff]
    pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
    pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    Unpacking initramfs...
    Freeing initrd memory: 3122k freed
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1269905228.550:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1730
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
    pcieport 0000:00:1c.5: setting latency timer to 64
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 412k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ata2: port disabled. ignoring.
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
    ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
    ata1.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
    ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.01: SATA link down (SStatus 0 SControl 300)
    ata3.00: ATA-7: ST9160823AS, 3.ADC, max UDMA/133
    ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/133
    scsi 2:0:0:0: Direct-Access ATA ST9160823AS 3.AD PQ: 0 ANSI: 5
    ata4.01: failed to resume link (SControl 0)
    ata4.00: SATA link down (SStatus 0 SControl 300)
    ata4.01: SATA link down (SStatus 0 SControl 0)
    sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 2:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
    padlock: VIA PadLock not detected.
    EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
    EXT4-fs (dm-4): write access will be enabled during recovery
    EXT4-fs (dm-4): orphan cleanup on readonly fs
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79470
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79469
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79468
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79467
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79466
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 48873
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 14902
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 115506
    EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 2598
    EXT4-fs (dm-4): 9 orphan inodes deleted
    EXT4-fs (dm-4): recovery complete
    EXT4-fs (dm-4): mounted filesystem with ordered data mode
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 151
    fuse init (API version 7.13)
    ACPI: SSDT 7f681138 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f680bfd 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    processor LNXCPU:00: registered as cooling_device0
    ACPI: SSDT 7f68137c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f6810b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    Switching to clocksource hpet
    processor LNXCPU:01: registered as cooling_device1
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM] (95 C)
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    ACPI: AC Adapter [AC] (on-line)
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PBTN]
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    iTCO_vendor_support: vendor-support=0
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    Linux agpgart interface v0.103
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ACPI: Battery Slot [BAT0] (battery present)
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SBTN]
    ACPI: WMI: Mapper loaded
    ACPI: Battery Slot [BAT1] (battery absent)
    tg3.c:v3.102 (September 1, 2009)
    tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    tg3 0000:09:00.0: setting latency timer to 64
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    agpgart-intel 0000:00:00.0: detected 7676K stolen memory
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:1c:0d:5b
    eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    [drm] Initialized drm 1.1.0 20060810
    cfg80211: Calling CRDA to update world regulatory domain
    input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
    input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
    yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
    yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
    yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    i915 0000:00:02.0: irq 27 for MSI/MSI-X
    [drm] set up 7M of stolen space
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    iwl3945: Copyright(c) 2003-2009 Intel Corporation
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: setting latency timer to 64
    yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
    yenta_cardbus 0000:03:01.0: Socket status: 30000006
    pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
    firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
    usb 5-1: new low speed USB device using uhci_hcd and address 2
    firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
    phy0: Selected rate control algorithm 'iwl-3945-rs'
    usb 5-1: configuration #1 chosen from 1 choice
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 2 processor cores.
    vboxdrv: fAsync=0 offMin=0x19e offMax=0x5df
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
    usb 7-1: new full speed USB device using uhci_hcd and address 2
    usbcore: registered new interface driver hiddev
    input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
    generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    firewire_core: created device fw0: GUID 384fc00038f52070, S400
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    usb 7-1: configuration #1 chosen from 1 choice
    clean.
    hub 7-1:1.0: USB hub found
    hub 7-1:1.0: 4 ports detected
    usb 7-1.2: new full speed USB device using uhci_hcd and address 3
    [drm] TV-16: set mode NTSC 480i 0
    usb 7-1.2: configuration #1 chosen from 1 choice
    [drm] LVDS-8: set mode 1280x800 1f
    CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
    Disabling lock debugging due to kernel taint
    CPU0: Temperature/speed normal
    Console: switching to colour frame buffer device 160x50
    fb0: inteldrmfb frame buffer device
    registered panic notifier
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input8
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input9
    ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    loop: module loaded
    EXT4-fs (dm-2): mounted filesystem with ordered data mode
    EXT4-fs (dm-3): mounted filesystem with ordered data mode
    iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
    iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
    Registered led device: iwl-phy0::radio
    Registered led device: iwl-phy0::assoc
    Registered led device: iwl-phy0::RX
    Registered led device: iwl-phy0::TX
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    tg3 0000:09:00.0: irq 29 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [drm] TV-16: set mode NTSC 480i 0
    [drm] TV-16: set mode NTSC 480i 0
    [drm] TV-16: set mode NTSC 480i 0
    [drm] TV-16: set mode NTSC 480i 0
    CE: hpet increasing min_delta_ns to 15000 nsec
    eth0: no IPv6 routers present
    CE: hpet increasing min_delta_ns to 22500 nsec
    Registered led device: iwl-phy0::radio
    Registered led device: iwl-phy0::assoc
    Registered led device: iwl-phy0::RX
    Registered led device: iwl-phy0::TX
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    tg3 0000:09:00.0: PME# enabled
    tg3 0000:09:00.0: PME# disabled
    tg3 0000:09:00.0: irq 29 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    tg3 0000:09:00.0: PME# enabled
    tg3 0000:09:00.0: PME# disabled
    tg3 0000:09:00.0: irq 29 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    eth0: no IPv6 routers present
    usb 5-1: USB disconnect, address 2
    usb 5-1: new low speed USB device using uhci_hcd and address 3
    usb 5-1: configuration #1 chosen from 1 choice
    input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input13
    generic-usb 0003:046D:C025.0002: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
    usb 5-1: USB disconnect, address 3
    usb 5-1: new low speed USB device using uhci_hcd and address 4
    usb 5-1: configuration #1 chosen from 1 choice
    input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input14
    generic-usb 0003:046D:C025.0003: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
    Machine check events logged
    CE: hpet increasing min_delta_ns to 33750 nsec
    input input14: event field not found
    input input14: event field not found
    usb 5-1: USB disconnect, address 4
    usb 5-1: new low speed USB device using uhci_hcd and address 5
    usb 5-1: configuration #1 chosen from 1 choice
    input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input15
    generic-usb 0003:046D:C025.0004: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
    ps -Af
    # ps -Af
    UID PID PPID C STIME TTY TIME CMD
    root 1 0 0 Mar29 ? 00:00:00 init [5]
    root 2 0 0 Mar29 ? 00:00:00 [kthreadd]
    root 3 2 0 Mar29 ? 00:00:00 [migration/0]
    root 4 2 0 Mar29 ? 00:00:00 [ksoftirqd/0]
    root 5 2 0 Mar29 ? 00:00:00 [watchdog/0]
    root 6 2 0 Mar29 ? 00:00:00 [migration/1]
    root 7 2 0 Mar29 ? 00:00:00 [ksoftirqd/1]
    root 8 2 0 Mar29 ? 00:00:00 [watchdog/1]
    root 9 2 0 Mar29 ? 00:00:00 [events/0]
    root 10 2 0 Mar29 ? 00:00:00 [events/1]
    root 11 2 0 Mar29 ? 00:00:00 [khelper]
    root 12 2 0 Mar29 ? 00:00:00 [async/mgr]
    root 13 2 0 Mar29 ? 00:00:00 [pm]
    root 14 2 0 Mar29 ? 00:00:00 [sync_supers]
    root 15 2 0 Mar29 ? 00:00:00 [bdi-default]
    root 16 2 0 Mar29 ? 00:00:00 [kblockd/0]
    root 17 2 0 Mar29 ? 00:00:00 [kblockd/1]
    root 18 2 0 Mar29 ? 00:00:00 [kacpid]
    root 19 2 0 Mar29 ? 00:00:00 [kacpi_notify]
    root 20 2 0 Mar29 ? 00:00:00 [kacpi_hotplug]
    root 21 2 0 Mar29 ? 00:00:00 [kseriod]
    root 24 2 0 Mar29 ? 00:00:00 [khungtaskd]
    root 25 2 0 Mar29 ? 00:00:00 [kswapd0]
    root 26 2 0 Mar29 ? 00:00:00 [ksmd]
    root 27 2 0 Mar29 ? 00:00:00 [aio/0]
    root 28 2 0 Mar29 ? 00:00:00 [aio/1]
    root 29 2 0 Mar29 ? 00:00:00 [crypto/0]
    root 30 2 0 Mar29 ? 00:00:00 [crypto/1]
    root 732 2 0 Mar29 ? 00:00:01 [ata/0]
    root 771 2 0 Mar29 ? 00:00:00 [ata/1]
    root 800 2 0 Mar29 ? 00:00:00 [ata_aux]
    root 836 2 0 Mar29 ? 00:00:02 [scsi_eh_0]
    root 884 2 0 Mar29 ? 00:00:00 [scsi_eh_1]
    root 930 2 0 Mar29 ? 00:00:00 [scsi_eh_2]
    root 931 2 0 Mar29 ? 00:00:00 [scsi_eh_3]
    root 968 2 0 Mar29 ? 00:00:00 [kstriped]
    root 971 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 974 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 977 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 980 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 1014 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 1015 2 0 Mar29 ? 00:00:01 [kcryptd_io]
    root 1016 2 2 Mar29 ? 00:01:10 [kcryptd]
    root 1025 2 0 Mar29 ? 00:00:00 [jbd2/dm-4-8]
    root 1026 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 1027 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 1060 1 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
    root 1591 2 0 Mar29 ? 00:00:01 [flush-254:4]
    root 1747 2 0 Mar29 ? 00:00:00 [kondemand/0]
    root 1795 2 0 Mar29 ? 00:00:00 [kondemand/1]
    root 1920 2 0 Mar29 ? 00:00:00 [kconservative/0]
    root 1961 2 0 Mar29 ? 00:00:00 [kconservative/1]
    root 2168 2 0 Mar29 ? 00:00:00 [kpsmoused]
    root 2563 2 0 Mar29 ? 00:00:00 [ksuspend_usbd]
    root 2591 2 0 Mar29 ? 00:00:00 [khubd]
    root 2961 2 0 Mar29 ? 00:00:00 [i915/0]
    root 2962 2 0 Mar29 ? 00:00:00 [i915/1]
    root 2974 2 0 Mar29 ? 00:00:00 [pccardd]
    root 2996 2 0 Mar29 ? 00:00:00 [iwl3945]
    root 3004 2 0 Mar29 ? 00:00:01 [phy0]
    root 3073 2 0 Mar29 ? 00:00:00 [usbhid_resumer]
    root 3336 2 0 Mar29 ? 00:00:00 [hd-audio0]
    root 4143 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 4144 2 0 Mar29 ? 00:00:00 [kcryptd_io]
    root 4145 2 0 Mar29 ? 00:00:00 [kcryptd]
    root 4170 2 0 Mar29 ? 00:00:00 [jbd2/dm-2-8]
    root 4171 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 4172 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 4173 2 0 Mar29 ? 00:00:00 [jbd2/dm-3-8]
    root 4174 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 4175 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
    root 4180 1 0 Mar29 ? 00:00:00 /sbin/mount.ntfs-3g /dev/sda1 /mnt/win -o rw,noexec,nosuid,nodev,users,uid=1001,gid=100,fmask=0113,dmask=000
    root 4448 1 0 Mar29 ? 00:00:00 supervising syslog-ng
    root 4449 4448 0 Mar29 ? 00:00:00 /usr/sbin/syslog-ng
    root 4458 1 0 Mar29 ? 00:00:00 /usr/sbin/acpid
    dbus 4472 1 1 Mar29 ? 00:00:27 /usr/bin/dbus-daemon --system
    hal 4475 1 0 Mar29 ? 00:00:04 /usr/sbin/hald
    root 4476 4475 0 Mar29 ? 00:00:00 hald-runner
    root 4504 4476 0 Mar29 ? 00:00:00 hald-addon-input: Listening on /dev/input/event4 /dev/input/event3 /dev/input/event9 /dev/input/event8 /dev/
    root 4508 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-rfkill-killswitch
    root 4520 4476 0 Mar29 ? 00:00:03 hald-addon-storage: polling /dev/sr0 (every 2 sec)
    root 4521 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-cpufreq
    hal 4522 4476 0 Mar29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
    root 4851 1 0 Mar29 ? 00:00:00 /usr/sbin/crond -S -l info
    root 4863 1 1 Mar29 ? 00:00:37 /usr/bin/python -O /usr/share/wicd/daemon/wicd-daemon.py
    ntp 4877 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
    root 4894 4863 0 Mar29 ? 00:00:25 /usr/bin/python -O /usr/share/wicd/daemon/monitor.py
    mpd 4908 1 0 Mar29 ? 00:00:00 /usr/bin/mpd /etc/mpd.conf
    root 4916 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
    root 4918 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
    root 4925 2 0 Mar29 ? 00:00:00 [loop0]
    root 4928 2 0 Mar29 ? 00:00:00 [kdmflush]
    root 4929 2 0 Mar29 ? 00:00:00 [kcryptd_io]
    root 4930 2 0 Mar29 ? 00:00:00 [kcryptd]
    root 4947 1 0 Mar29 tty1 00:00:00 /sbin/agetty 38400 tty1 linux
    root 4948 1 0 Mar29 tty2 00:00:00 /sbin/agetty 38400 tty2 linux
    root 4949 1 0 Mar29 tty3 00:00:00 /sbin/agetty 38400 tty3 linux
    root 4950 1 0 Mar29 tty6 00:00:00 /bin/login -f
    zed 4951 4950 0 Mar29 tty6 00:00:00 -bash
    zed 4993 4951 0 Mar29 tty6 00:00:00 /bin/sh /usr/bin/startx
    zed 5010 4993 0 Mar29 tty6 00:00:00 xinit /home/zed/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.LXTS3D7lp0
    root 5011 5010 10 Mar29 tty4 00:04:27 /usr/bin/X -nolisten tcp
    zed 5020 5010 0 Mar29 tty6 00:00:00 ck-launch-session openbox-session
    root 5022 1 0 Mar29 ? 00:00:00 /usr/sbin/console-kit-daemon --no-daemon
    zed 5095 5020 0 Mar29 tty6 00:00:03 /usr/bin/openbox
    zed 5099 5095 0 Mar29 tty6 00:00:00 gnome-session
    root 5106 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
    zed 5109 1 0 Mar29 ? 00:00:00 /usr/bin/ssh-agent
    zed 5113 1 0 Mar29 tty6 00:00:00 dbus-launch --exit-with-session gnome-session
    zed 5114 1 0 Mar29 ? 00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    root 5118 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-power-daemon
    zed 5122 1 0 Mar29 ? 00:00:00 /usr/lib/GConf/gconfd-2
    zed 5140 1 0 Mar29 tty6 00:00:00 gnome-keyring-daemon --start
    zed 5142 5099 0 Mar29 tty6 00:00:06 gnome-panel
    zed 5152 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfsd
    zed 5157 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/zed/.gvfs
    zed 5161 5099 0 Mar29 tty6 00:00:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon
    zed 5162 5099 0 Mar29 tty6 00:00:08 /usr/bin/python -O /usr/share/wicd/gtk/wicd-client.py
    zed 5163 5099 0 Mar29 tty6 00:00:00 /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
    zed 5165 1 0 Mar29 ? 00:00:00 /usr/lib/bonobo/bonobo-activation-server --ac-activate --ior-output-fd=18
    root 5167 1 0 Mar29 ? 00:00:00 /usr/lib/polkit-1/polkitd
    root 5170 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-disks-daemon
    root 5171 5170 0 Mar29 ? 00:00:02 devkit-disks-daemon: polling /dev/sr0
    zed 5188 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Factory --oaf-ior-fd=18
    zed 5190 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_NotificationAreaApplet_Factory
    zed 5192 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-applets/battstat-applet-2 --oaf-activate-iid=OAFIID:GNOME_BattstatApplet_Factory --oaf-ior-fd
    zed 5200 1 0 Mar29 ? 00:00:18 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oaf-ior-fd=19
    zed 5202 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor
    zed 5208 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
    zed 5215 1 0 Mar29 ? 00:00:03 python /usr/lib/hamster-applet/hamster-applet --oaf-activate-iid=OAFIID:Hamster_Applet_Factory --oaf-ior-fd=
    zed 5218 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-panel/clock-applet --oaf-activate-iid=OAFIID:GNOME_ClockApplet_Factory --oaf-ior-fd=32
    zed 5236 1 0 Mar29 ? 00:00:00 /usr/lib/evolution-data-server-1.2/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evolution_Data
    root 5257 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-leds
    root 5270 4863 0 Mar29 ? 00:00:00 [dhcpcd] <defunct>
    root 5291 1 0 Mar29 ? 00:00:00 /sbin/dhcpcd eth0 -h tortuga
    zed 5295 5095 0 Mar29 tty6 00:00:02 urxvt -fn -*-terminus-medium-*-*-*-16-*-*-*-*-*-iso8859-2 -e sudo su -
    root 5297 5295 0 Mar29 pts/0 00:00:00 su -
    root 5299 5297 0 Mar29 pts/0 00:00:06 -bash
    zed 5364 5095 16 Mar29 tty6 00:07:00 /usr/lib/chromium/chromium
    zed 5365 5364 0 Mar29 tty6 00:00:18 /usr/lib/chromium/chromium
    zed 5366 5364 0 Mar29 tty6 00:00:00 /usr/lib/chromium/chromium --type=zygote
    zed 5390 5366 0 Mar29 tty6 00:00:03 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
    zed 5395 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
    zed 5406 5366 0 Mar29 tty6 00:00:06 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
    zed 5411 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
    zed 5479 5366 7 Mar29 tty6 00:03:10 /usr/lib/chromium/chromium --type=renderer --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImpa
    dropbox 5492 1 0 Mar29 ? 00:00:10 /home/dropbox/.dropbox-dist/dropbox
    zed 5543 1 0 Mar29 ? 00:00:00 kdeinit4: kdeinit4 Running...
    zed 5545 5543 0 Mar29 ? 00:00:00 kdeinit4: klauncher [kdeinit] --fd=8
    zed 5548 1 0 Mar29 ? 00:00:02 kdeinit4: kded4 [kdeinit]
    zed 5562 5543 0 Mar29 ? 00:00:00 kdeinit4: kio_file [kdeinit] file local:/tmp
    zed 5567 1 0 Mar29 ? 00:00:01 /usr/bin/knotify4
    root 5572 1060 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
    zed 5717 1 0 Mar29 ? 00:00:00 /usr/lib/gamin/gam_server
    zed 6126 5366 2 Mar29 tty6 00:00:28 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImp
    root 6459 1 0 Mar29 ? 00:00:00 /usr/lib/sa/sadc -F -L -S DISK 600 6 -
    root 6518 1060 0 00:01 ? 00:00:00 /sbin/udevd --daemon
    root 6804 2 0 00:10 ? 00:00:00 [flush-254:6]
    root 6807 5299 0 00:10 pts/0 00:00:00 ps -Af
    Edit: typo
    Edit2: I found the source of slowness - removing vboxdrv module restores system performance. How to get VirtualBox working I will try to solve somewhere else.
    Last edited by stabele (2010-03-30 20:40:52)

    sand_man wrote:X is running at 25% cpu on average
    Your's and mine problems are probably not connected, I had low CPU utilization from all sources (including X), but system was dead slow anyway.

  • [Solved] RAID 5 degraded after 3.13 upgrade

    Hi there,
    after upgrading my home server to the latest kernel 3.13 I've found out, that my RAID 5 got degraded. One of the drives has been kicked out, but I don't know why. The drive seems okay, I've also done a SMART short test, completed without any errors. The only suspicious looking error message, when upgrading to Linux 3.13 was:
    ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
    This is mdstat output:
    [tolga@Ragnarok ~]$ cat /proc/mdstat
    Personalities : [raid6] [raid5] [raid4]
    md127 : active raid5 sda1[0] sdc1[3] sdb1[1]
    5860145664 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [UUU_]
    unused devices: <none>
    smartctl:
    [tolga@Ragnarok ~]$ sudo smartctl -a /dev/sdd
    smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.4-1-ARCH] (local build)
    Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Red (AF)
    Device Model: WDC WD20EFRX-68AX9N0
    Serial Number: [removed]
    LU WWN Device Id: 5 0014ee 2b2cd537a
    Firmware Version: 80.00A80
    User Capacity: 2,000,398,934,016 bytes [2.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ACS-2 (minor revision not indicated)
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
    Local Time is: Fri Feb 21 22:26:30 2014 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: (26580) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 268) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x70bd) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 164 163 021 Pre-fail Always - 6766
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 273
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1954
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 273
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 6
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 266
    194 Temperature_Celsius 0x0022 115 104 000 Old_age Always - 35
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
    SMART Error Log Version: 1
    ATA Error Count: 306 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    Error 306 occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    04 61 02 00 00 00 a0 Device Fault; Error: ABRT
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    ef 10 02 00 00 00 a0 08 22:17:38.065 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.065 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 08 22:17:38.064 SET FEATURES [Set transfer mode]
    ef 10 02 00 00 00 a0 08 22:17:38.064 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.064 IDENTIFY DEVICE
    Error 305 occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    04 61 46 00 00 00 a0 Device Fault; Error: ABRT
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    ef 03 46 00 00 00 a0 08 22:17:38.064 SET FEATURES [Set transfer mode]
    ef 10 02 00 00 00 a0 08 22:17:38.064 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.064 IDENTIFY DEVICE
    ef 10 02 00 00 00 a0 08 22:17:38.063 SET FEATURES [Enable SATA feature]
    Error 304 occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    04 61 02 00 00 00 a0 Device Fault; Error: ABRT
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    ef 10 02 00 00 00 a0 08 22:17:38.064 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.064 IDENTIFY DEVICE
    ef 10 02 00 00 00 a0 08 22:17:38.063 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.063 IDENTIFY DEVICE
    Error 303 occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    04 61 02 00 00 00 a0 Device Fault; Error: ABRT
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    ef 10 02 00 00 00 a0 08 22:17:38.063 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.063 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 08 22:17:38.063 SET FEATURES [Set transfer mode]
    ef 10 02 00 00 00 a0 08 22:17:38.063 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.062 IDENTIFY DEVICE
    Error 302 occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    04 61 46 00 00 00 a0 Device Fault; Error: ABRT
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    ef 03 46 00 00 00 a0 08 22:17:38.063 SET FEATURES [Set transfer mode]
    ef 10 02 00 00 00 a0 08 22:17:38.063 SET FEATURES [Enable SATA feature]
    ec 00 00 00 00 00 a0 08 22:17:38.062 IDENTIFY DEVICE
    ef 10 02 00 00 00 a0 08 22:17:38.062 SET FEATURES [Enable SATA feature]
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 1954 -
    # 2 Short offline Completed without error 00% 0 -
    # 3 Conveyance offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    This is my mdadm configuration:
    [tolga@Ragnarok ~]$ cat /etc/mdadm.conf
    ARRAY /dev/md/Asura metadata=1.2 UUID=34bab60a:4d640b50:6228c429:0679bb34 name=Ragnarok:Asura
    I've checked all partition tables, everything seems ok. "Error 30[x] occurred at disk power-on lifetime: 1706 hours (71 days + 2 hours)" seems to be a one-time event, which happened on 1706 hours (I don't know why; no power loss or something similar). Other than those smartctl errors, everything seems fine. I've also inspected the drive; no suspicious noises or anything else, works like the other 3 drives. Am I safe to simply re-add the drive using "sudo mdadm --manage --re-add /dev/md127 /dev/sdd1" and let it re-sync or should I flag it as failed and then re-add it to the RAID?
    I am using 4x 2TB Western Digital Red drives in a RAID 5, which are about 1 year old and they ran perfectly fine until now. The server is currently shut down until this problem is fixed. I currently got a partial backup of my data (most important ones) and will make a full backup, before attempting a repair. At the moment, I'm still able to access all my data, so nothing's wrong there.
    So, what do you guys think, what should I do?
    Last edited by tolga9009 (2014-09-13 12:48:13)

    Thank you brian for the fast reply. I've backed up all my important data and tried the command. It's not working ...
    [tolga@Ragnarok ~]$ sudo mdadm --manage --re-add /dev/md127 /dev/sdd1
    mdadm: --re-add for /dev/sdd1 to /dev/md127 is not possible
    [tolga@Ragnarok ~]$ lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 1.8T 0 disk
    ââsda1 8:1 0 1.8T 0 part
    ââmd127 9:127 0 5.5T 0 raid5 /media/Asura
    sdb 8:16 0 1.8T 0 disk
    ââsdb1 8:17 0 1.8T 0 part
    ââmd127 9:127 0 5.5T 0 raid5 /media/Asura
    sdc 8:32 0 1.8T 0 disk
    ââsdc1 8:33 0 1.8T 0 part
    ââmd127 9:127 0 5.5T 0 raid5 /media/Asura
    sdd 8:48 0 1.8T 0 disk
    ââsdd1 8:49 0 1.8T 0 part
    sde 8:64 0 59.6G 0 disk
    ââsde1 8:65 0 512M 0 part /boot/efi
    ââsde2 8:66 0 4G 0 part [SWAP]
    ââsde3 8:67 0 54.6G 0 part /
    ââsde4 8:68 0 512M 0 part /boot
    Out of curiosity, I've compared "mdadm -E" of the corrupted and a healthy drive. Here's the output:
    [tolga@Ragnarok ~]$ diff -u sdc sdd
    --- sdc 2014-02-21 23:28:51.051674496 +0100
    +++ sdd 2014-02-21 23:28:55.911816816 +0100
    @@ -1,4 +1,4 @@
    -/dev/sdc1:
    +/dev/sdd1:
    Magic : a92b4efc
    Version : 1.2
    Feature Map : 0x0
    @@ -14,15 +14,15 @@
    Data Offset : 262144 sectors
    Super Offset : 8 sectors
    Unused Space : before=262064 sectors, after=1167 sectors
    - State : clean
    - Device UUID : 4ce2ba99:645b1cc6:60c23336:c4428e2f
    + State : active
    + Device UUID : 4aeef598:64ff6631:826f445e:dbf77ab5
    - Update Time : Fri Feb 21 23:18:20 2014
    - Checksum : a6c42392 - correct
    - Events : 16736
    + Update Time : Sun Jan 12 06:40:56 2014
    + Checksum : bf106b2a - correct
    + Events : 7295
    Layout : left-symmetric
    Chunk Size : 512K
    - Device Role : Active device 2
    - Array State : AAA. ('A' == active, '.' == missing, 'R' == replacing)
    + Device Role : Active device 3
    + Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
    So, I guess my only way to fix this is remove the faulty drive from the RAID, zero out the superblock and then re-add it as a new drive. Or is there any other way to fix this?
    //Edit: I've used "mdadm --detail /dev/md127" and found out, that the faulty drive wasn't even listed anymore. So instead of using "re-add", I simply added it as a new drive and it's resyncing now. In about 220mins, I'll know more ! Is there a way to check for corruption after syncing the drives?
    //Edit: ^ this worked. My drive probably didn't got kicked after the 3.13 upgrade, but I've simply noticed it then. The drive seems to be kicked after ~1700 hours for some unknown reason - I've now disconnected and reconnected all drives to opt out any wiring issues. Since the drive was out of sync, simply re-adding it didn't work. I had to manually add it to the array again and this caused a resync, which took around 3,5 hours. I think that's okay for a 4x 2TB RAID 5 array. Everything is working fine again, no data corruption, nothing. I'll mark it as solved.
    Last edited by tolga9009 (2014-09-13 12:59:22)

  • MacBook Pro is VERY slow after Mountain Lion upgrade

    Hello folks, I have a MacBook Pro that was running very well before I upgraded to Mountain Lion...since then it runs worse than a Windows machine.
    The configuration is as follows:
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,3
      Processor Name:          Intel Core i7
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.70f5
      Serial Number (system):          C0xxxxxxF92
      Hardware UUID:          5BCBC5E9-E531-55F0-A712-B40886C7B45F
      Sudden Motion Sensor:
      State:          Enabled
    As stated, I have 8 GB of ram, under system memory I have the following info:
    Free: 863 MB
    Wired: 1.28 GB
    Active: 3.60 GB
    Inactive 2.27 GB
    Used 7.15 GB
    VM Size 306.76 GB
    Page Ins 1.22 GB
    Page Out 745.4 MB
    Swap Used 2.12 GB
    Disk usage is:
    Space Utilized 454.49 GB
    Space Free 294.8 GB
    I have rebooted on many occasions and it is still slow. 
    Any ideas as to what could be going on?
    John
    <Edited By Host>

    Regardless of whether you think you need it, uninstall it and test to see if the slowness problem is solved.
    If it isn't put it back if you must, but there's no point trying to look for another cause till you've eliminated this one. You have a huge amount swaps which is what is causing your slowdown. 90% chance that's your AV software doing that.

  • Battery drains very fast after Mountain lion upgrade

    After I upgraded the OS from Lion to Mountain Lion battery drains very fast in my MacBook Pro 13" (Mid 2010).
    Drains approxymately 1% every minute.
    I am now on 10.8.2
    Any solutions? Any Help?

    Hope we find some solution at the earliest.
    Or else, I will have to roll back to Lion and my $20 is lost for 10.8.1
    I am really disappointed.

  • [solved]no keyboard/mouse after xorg-xinit upgrade (startxfce4 broken)

    Today's upgrade and subsequent downgrade (with testing repos disabled)
    [root@KISE-005 ~]# cat /var/log/pacman.log | grep 2015-03-17 | grep upgraded
    [2015-03-17 09:54] [ALPM] upgraded conky (1.9.0-4 -> 1.9.0-5)
    [2015-03-17 09:54] [ALPM] upgraded gsfonts (20130917-1 -> 20150122-1)
    [2015-03-17 09:54] [ALPM] upgraded libmatekbd (1.8.0-1 -> 1.8.1-1)
    [2015-03-17 09:54] [ALPM] upgraded libvdpau (1.0-1 -> 1.1-1)
    [2015-03-17 09:54] [ALPM] upgraded mate-desktop (1.8.1-2 -> 1.8.2-1)
    [2015-03-17 09:54] [ALPM] upgraded marco (1.8.2-4 -> 1.8.3-1)
    [2015-03-17 09:54] [ALPM] upgraded mate-settings-daemon-gstreamer (1.8.2-3 -> 1.8.3-1)
    [2015-03-17 09:54] [ALPM] upgraded python-setuptools (1:14.1.1-1 -> 1:14.3-1)
    [2015-03-17 09:54] [ALPM] upgraded python2-setuptools (1:14.1.1-1 -> 1:14.3-1)
    [2015-03-17 09:54] [ALPM] upgraded vim-runtime (7.4.617-1 -> 7.4.663-1)
    [2015-03-17 09:54] [ALPM] upgraded vim (7.4.617-1 -> 7.4.663-1)
    [2015-03-17 09:54] [ALPM] upgraded xdg-utils (1.1.0.git20141009-1 -> 1.1.0.git20150302-1)
    [2015-03-17 09:54] [ALPM] upgraded xorg-xinit (1.3.4-1 -> 1.3.4-2)
    [2015-03-17 09:56] [ALPM] upgraded insync (1.1.5-1 -> 1.2.1-1)
    [2015-03-17 09:59] [ALPM] upgraded ttf-google-fonts-git (20140805-1 -> 20150316-1)
    [root@KISE-005 ~]# cat /var/log/pacman.log | grep 2015-03-17 | grep downgraded
    [2015-03-17 10:56] [ALPM] downgraded libutil-linux (2.26.1-3 -> 2.25.2-1)
    [2015-03-17 10:56] [ALPM] downgraded libsystemd (219-3 -> 218-2)
    [2015-03-17 10:56] [ALPM] downgraded shadow (4.2.1-3 -> 4.2.1-2)
    [2015-03-17 10:56] [ALPM] downgraded util-linux (2.26.1-3 -> 2.25.2-1)
    [2015-03-17 10:56] [ALPM] downgraded systemd (219-3 -> 218-2)
    [2015-03-17 10:56] [ALPM] downgraded libcups (2.0.2-2 -> 2.0.2-1)
    [2015-03-17 10:56] [ALPM] downgraded cups (2.0.2-2 -> 2.0.2-1)
    [2015-03-17 10:56] [ALPM] downgraded libssh2 (1.5.0-1 -> 1.4.3-2)
    [2015-03-17 10:56] [ALPM] downgraded lib32-libssh2 (1.5.0-1 -> 1.4.3-2)
    [2015-03-17 10:56] [ALPM] downgraded lib32-libx11 (1.6.3-1 -> 1.6.2-1)
    [2015-03-17 10:56] [ALPM] downgraded lib32-util-linux (2.26-1 -> 2.25.2-1)
    [2015-03-17 10:57] [ALPM] downgraded linux (3.19.1-1 -> 3.18.6-1)
    [2015-03-17 10:57] [ALPM] downgraded nvidia (346.47-9 -> 346.47-3)
    [2015-03-17 10:57] [ALPM] downgraded systemd-sysvcompat (219-3 -> 218-2)
    [2015-03-17 10:57] [ALPM] downgraded vim-runtime (7.4.663-1 -> 7.4.617-1)
    [2015-03-17 10:57] [ALPM] downgraded vim (7.4.663-1 -> 7.4.617-1)
    [2015-03-17 10:57] [ALPM] downgraded xdg-utils (1.1.0.git20150302-1 -> 1.1.0.git20141009-1)
    [2015-03-17 10:57] [ALPM] downgraded xorg-xinit (1.3.4-2 -> 1.3.4-1)
    After upgrade the keyboard and mouse were unresponsive. Restored by downgrading with testing repos disabled.
    Also upgraded today with testing repos enabled was i686 and no anomalies detected.
    Xorg.0.log for failed boot is here http://pastebin.com/aarDvve2
    Last edited by keepitsimpleengineer (2015-03-24 19:30:45)

    hello ,
    after an upgrade yesterday , it is not possible to launch xfce4 on tty , when i do startxfce4 , i had this error :
    xinit giving up
    xinit unable to connect to x server ..................
    xinit server error
    this my xorg log :
    [   198.530]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [   198.536] X Protocol Version 11, Revision 0
    [   198.538] Build Operating System: Linux 3.18.6-1-ARCH i686
    [   198.540] Current Operating System: Linux eternity 3.14.36-1-lts #1 SMP Wed Mar 18 18:32:14 CET 2015 i686
    [   198.541] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b52f032b-9579-4da9-9a9b-d15b4dd7e565 rw quiet
    [   198.545] Build Date: 14 March 2015  06:47:44PM
    [   198.547]
    [   198.550] Current version of pixman: 0.32.6
    [   198.554]    Before reporting problems, check http://wiki.x.org
       to make sure that you have the latest version.
    [   198.554] Markers: (--) probed, (**) from config file, (==) default setting,
       (++) from command line, (!!) notice, (II) informational,
       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [   198.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 10:03:55 2015
    [   198.567] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [   198.567] (==) No Layout section.  Using the first Screen section.
    [   198.567] (==) No screen section available. Using defaults.
    [   198.567] (**) |-->Screen "Default Screen Section" (0)
    [   198.567] (**) |   |-->Monitor "<default monitor>"
    [   198.568] (==) No monitor specified for screen "Default Screen Section".
       Using a default monitor configuration.
    [   198.568] (==) Automatically adding devices
    [   198.568] (==) Automatically enabling devices
    [   198.568] (==) Automatically adding GPU devices
    [   198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [   198.568]    Entry deleted from font path.
    [   198.568]    (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [   198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [   198.568]    Entry deleted from font path.
    [   198.568]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [   198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [   198.568]    Entry deleted from font path.
    [   198.568]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [   198.568] (==) FontPath set to:
       /usr/share/fonts/misc/,
       /usr/share/fonts/TTF/,
       /usr/share/fonts/Type1/
    [   198.568] (==) ModulePath set to "/usr/lib/xorg/modules"
    [   198.568] (II) The server relies on udev to provide the list of input devices.
       If no devices become available, reconfigure udev or disable AutoAddDevices.
    [   198.568] (II) Loader magic: 0x829e700
    [   198.568] (II) Module ABI versions:
    [   198.568]    X.Org ANSI C Emulation: 0.4
    [   198.568]    X.Org Video Driver: 19.0
    [   198.568]    X.Org XInput driver : 21.0
    [   198.568]    X.Org Server Extension : 9.0
    [   198.570] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [   198.571] (II) xfree86: Adding drm device (/dev/dri/card0)
    [   198.571] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [   198.573] (--) PCI:*(0:1:5:0) 1002:5a62:1043:1402 rev 0, Mem @ 0xa0000000/268435456, 0xfa8f0000/65536, I/O @ 0x00009800/256, BIOS @ 0x????????/131072
    [   198.573] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [   198.573] (II) LoadModule: "glx"
    [   198.574] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [   198.576] (II) Module glx: vendor="X.Org Foundation"
    [   198.576]    compiled for 1.17.1, module version = 1.0.0
    [   198.576]    ABI class: X.Org Server Extension, version 9.0
    [   198.576] (==) AIGLX enabled
    [   198.576] (==) Matched ati as autoconfigured driver 0
    [   198.576] (==) Matched ati as autoconfigured driver 1
    [   198.576] (==) Matched modesetting as autoconfigured driver 2
    [   198.576] (==) Matched fbdev as autoconfigured driver 3
    [   198.576] (==) Matched vesa as autoconfigured driver 4
    [   198.576] (==) Assigned the driver to the xf86ConfigLayout
    [   198.576] (II) LoadModule: "ati"
    [   198.576] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [   198.576] (II) Module ati: vendor="X.Org Foundation"
    [   198.576]    compiled for 1.17.0, module version = 7.5.0
    [   198.576]    Module class: X.Org Video Driver
    [   198.576]    ABI class: X.Org Video Driver, version 19.0
    [   198.576] (II) LoadModule: "radeon"
    [   198.576] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [   198.577] (II) Module radeon: vendor="X.Org Foundation"
    [   198.577]    compiled for 1.17.0, module version = 7.5.0
    [   198.577]    Module class: X.Org Video Driver
    [   198.577]    ABI class: X.Org Video Driver, version 19.0
    [   198.577] (II) LoadModule: "modesetting"
    [   198.577] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [   198.577] (II) Module modesetting: vendor="X.Org Foundation"
    [   198.577]    compiled for 1.17.1, module version = 1.17.1
    [   198.577]    Module class: X.Org Video Driver
    [   198.577]    ABI class: X.Org Video Driver, version 19.0
    [   198.577] (II) LoadModule: "fbdev"
    [   198.577] (WW) Warning, couldn't open module fbdev
    [   198.577] (II) UnloadModule: "fbdev"
    [   198.577] (II) Unloading fbdev
    [   198.577] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [   198.577] (II) LoadModule: "vesa"
    [   198.578] (WW) Warning, couldn't open module vesa
    [   198.578] (II) UnloadModule: "vesa"
    [   198.578] (II) Unloading vesa
    [   198.578] (EE) Failed to load module "vesa" (module does not exist, 0)
    [   198.578] (II) RADEON: Driver for ATI Radeon chipsets:
       ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
       ATI Radeon Mobility X300 (M24) 3152 (PCIE),
       ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
       ATI Radeon X600 (RV380) 3E50 (PCIE),
       ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
       ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
       ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
       ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
       ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
       ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
       ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
       ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
       ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
       ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
       ATI Radeon IGP330M/340M/350M (U2) 4337,
       ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
       ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
       ATI Radeon X800PRO (R420) JI (AGP),
       ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
       ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
       ATI Radeon Mobility 9800 (M18) JN (AGP),
       ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
       ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
       ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
       ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
       ATI Radeon Mobility M7 LW (AGP),
       ATI Mobility FireGL 7800 M7 LX (AGP),
       ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
       ATI FireGL Mobility 9000 (M9) Ld (AGP),
       ATI Radeon Mobility 9000 (M9) Lf (AGP),
       ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
       ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
       ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
       ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
       ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
       ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
       ATI Radeon Mobility 9600 (M10) NQ (AGP),
       ATI Radeon Mobility 9600 (M11) NR (AGP),
       ATI Radeon Mobility 9600 (M10) NS (AGP),
       ATI FireGL Mobility T2 (M10) NT (AGP),
       ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
       ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
       ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
       ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
       ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
       ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
       ATI Radeon Mobility X300 (M22) 5460 (PCIE),
       ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
       ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
       ATI Radeon X800PRO (R423) UI (PCIE),
       ATI Radeon X800LE (R423) UJ (PCIE),
       ATI Radeon X800SE (R423) UK (PCIE),
       ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
       ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
       ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
       ATI FireGL unknown (R423) UR (PCIE),
       ATI FireGL unknown (R423) UT (PCIE),
       ATI Mobility FireGL V5000 (M26) (PCIE),
       ATI Mobility FireGL V5000 (M26) (PCIE),
       ATI Mobility Radeon X700 XL (M26) (PCIE),
       ATI Mobility Radeon X700 (M26) (PCIE),
       ATI Mobility Radeon X700 (M26) (PCIE),
       ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
       ATI Radeon Mobility 9100 IGP (U3) 5835,
       ATI Radeon XPRESS 200 5954 (PCIE),
       ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
       ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
       ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
       ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
       ATI Radeon XPRESS 200M 5975 (PCIE),
       ATI Radeon XPRESS 200 5A41 (PCIE),
       ATI Radeon XPRESS 200M 5A42 (PCIE),
       ATI Radeon XPRESS 200 5A61 (PCIE),
       ATI Radeon XPRESS 200M 5A62 (PCIE),
       ATI Radeon X300 (RV370) 5B60 (PCIE),
       ATI Radeon X600 (RV370) 5B62 (PCIE),
       ATI Radeon X550 (RV370) 5B63 (PCIE),
       ATI FireGL V3100 (RV370) 5B64 (PCIE),
       ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
       ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
       ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
       ATI Mobility Radeon X800 XT (M28) (PCIE),
       ATI Mobility FireGL V5100 (M28) (PCIE),
       ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
       ATI Radeon X850 XT PE (R480) (PCIE),
       ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
       ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
       ATI Radeon X850 XT (R480) (PCIE),
       ATI Radeon X800XT (R423) 5D57 (PCIE),
       ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
       ATI Radeon X700 PRO (RV410) (PCIE),
       ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
       ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
       ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
       ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
       ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
       ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
       ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
       ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
       ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
       ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
       ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
       ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
       ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
       ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
       ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
       ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
       ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
       ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
       ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
       ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
       ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
       ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
       ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
       ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
       ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
       ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
       ATI Mobility Radeon X1700, ATI Radeon X2300HD,
       ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
       ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
       ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
       ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
       ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
       ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
       ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
       ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
       ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
       ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
       ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
       ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
       ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
       ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
       ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
       ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
       ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
       ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
       ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
       ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
       AMD FireStream 9250, ATI FirePro V8700 (FireGL),
       ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
       ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
       ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
       ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
       ATI Mobility Radeon HD 4670, ATI FirePro M5750,
       ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
       ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
       ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
       ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
       ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
       ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
       ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
       ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
       ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
       ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
       ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
       ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
       ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
       ATI Mobility Radeon HD 3850 X2, ATI RV670,
       ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
       ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
       ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
       ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
       ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
       ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
       ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
       ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
       ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
       ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
       ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
       ATI FireGL V3600, ATI Radeon HD 2600 LE,
       ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
       ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
       ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
       ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
       ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
       ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
       ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
       ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
       ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
       ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
       ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
       ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
       ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
       SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
       ATI Radeon 4100, ATI Mobility Radeon HD 4200,
       ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
       AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
       AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
       AMD Radeon HD 6300 Series Graphics,
       AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
       AMD Firestream 9350, ATI Radeon HD 5800 Series,
       ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
       ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
       ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
       ATI Mobility Radeon HD 5800 Series,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
       ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
       ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
       ATI Mobility Radeon HD 5000 Series,
       ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
       ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
       ATI Mobility Radeon HD 5000 Series,
       ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
       ATI Mobility Radeon Graphics, CEDAR,
       ATI FirePro (FireGL) Graphics Adapter,
       ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
       ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
       CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
       AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
       CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
       BARTS, BARTS, Mobility Radeon HD 6000 Series,
       Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
       AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
       AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
       TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
       TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
       CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
       CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
       ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
       ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
       ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
       ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
       TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
       TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
       PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
       VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
       VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
       VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
       OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
       HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
       BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
       BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
       KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
       KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
       MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
       MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
       KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
       KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
       KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
       HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [   198.591] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [   198.591] (--) using VT number 2
    [   198.642] (II) [KMS] Kernel modesetting enabled.
    [   198.642] (WW) Falling back to old probe method for modesetting
    [   198.642] (II) RADEON(0): Creating default Display subsection in Screen section
       "Default Screen Section" for depth/fbbpp 24/32
    [   198.642] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [   198.642] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [   198.642] (==) RADEON(0): Default visual is TrueColor
    [   198.642] (==) RADEON(0): RGB weight 888
    [   198.642] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [   198.642] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5A62 (PCIE)" (ChipID = 0x5a62)
    [   198.642] (EE) RADEON(0): [drm] failed to set drm interface version.
    [   198.642] (EE) RADEON(0): Kernel modesetting setup failed
    [   198.642] (II) UnloadModule: "radeon"
    [   198.643] (EE) Screen(s) found, but none have a usable configuration.
    [   198.643] (EE)
    Fatal server error:
    [   198.643] (EE) no screens found(EE)
    [   198.643] (EE)
    Please consult the The X.Org Foundation support
        at http://wiki.x.org
    for help.
    [   198.643] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [   198.643] (EE)
    [   198.673] (EE) Server terminated with error (1). Closing log file.
       so i think i have module and/or config problem , what i need to do to recover server X ????
         thx .

  • [SOLVED] Broken Gwibber/couchdb after Apr 9 upgrade

    After a 1.3GB upgrade (2.6.33, ssl, gtk, ssh...) I can no longer use Gwibber.
    I use the following components:
    aur/couchdb 0.11.0-1
    aur/python-couchdb 0.6.1-1
    aur/desktopcouch 0.6.3-3
    aur/gwibber-new 2.29.94-1
    When I start gwibber I get:
    Traceback (most recent call last):
    File "/usr/bin/gwibber", line 67, in <module>
    client.Client()
    File "/usr/lib/python2.6/site-packages/gwibber/client.py", line 447, in __init__
    self.w = GwibberClient()
    File "/usr/lib/python2.6/site-packages/gwibber/client.py", line 29, in __init__
    self.model = gwui.Model()
    File "/usr/lib/python2.6/site-packages/gwibber/gwui.py", line 42, in __init__
    self.settings = util.SettingsMonitor()
    File "/usr/lib/python2.6/site-packages/gwibber/util.py", line 91, in __init__
    DEFAULT_SETTINGS)
    File "/usr/lib/python2.6/site-packages/gwibber/microblog/util/couch.py", line 66, in __init__
    self.database = CouchDatabase(dbname, create=True)
    File "/usr/lib/python2.6/site-packages/desktopcouch/records/server.py", line 53, in __init__
    port = desktopcouch.find_port(ctx=ctx)
    File "/usr/lib/python2.6/site-packages/desktopcouch/__init__.py", line 51, in find_port
    return _direct_access_find_port(pid=pid, ctx=ctx)
    File "/usr/lib/python2.6/site-packages/desktopcouch/__init__.py", line 132, in __find_port__linux
    raise RuntimeError("Unable to find listening port")
    RuntimeError: Unable to find listening port
    When starting couchdb I get:
    Apache CouchDB 0.11.0 (LogLevel=info) is starting.
    =CRASH REPORT==== 9-Apr-2010::18:45:28 ===
    crasher:
    initial call: couch_event_sup:init/1
    pid: <0.79.0>
    registered_name: []
    exception exit: {{badmatch,
    {'EXIT',
    {{badmatch,{error,eacces}},
    [{couch_log,init,1},
    {gen_event,server_add_handler,4},
    {gen_event,handle_msg,5},
    {proc_lib,init_p_do_apply,3}]}}},
    [{couch_event_sup,init,1},
    {gen_server,init_it,6},
    {proc_lib,init_p_do_apply,3}]}
    in function gen_server:init_it/6
    ancestors: [couch_primary_services,couch_server_sup,<0.32.0>]
    messages: []
    links: [<0.78.0>,<0.5.0>]
    dictionary: []
    trap_exit: false
    status: running
    heap_size: 233
    stack_size: 24
    reductions: 116
    neighbours:
    =SUPERVISOR REPORT==== 9-Apr-2010::18:45:28 ===
    Supervisor: {local,couch_primary_services}
    Context: start_error
    Reason: {{badmatch,{'EXIT',{{badmatch,{error,eacces}},
    [{couch_log,init,1},
    {gen_event,server_add_handler,4},
    {gen_event,handle_msg,5},
    {proc_lib,init_p_do_apply,3}]}}},
    [{couch_event_sup,init,1},
    {gen_server,init_it,6},
    {proc_lib,init_p_do_apply,3}]}
    Offender: [{pid,undefined},
    {name,couch_log},
    {mfa,{couch_log,start_link,[]}},
    {restart_type,permanent},
    {shutdown,brutal_kill},
    {child_type,worker}]
    =SUPERVISOR REPORT==== 9-Apr-2010::18:45:28 ===
    Supervisor: {local,couch_server_sup}
    Context: start_error
    Reason: shutdown
    Offender: [{pid,undefined},
    {name,couch_primary_services},
    {mfa,{couch_server_sup,start_primary_services,[]}},
    {restart_type,permanent},
    {shutdown,infinity},
    {child_type,supervisor}]
    =CRASH REPORT==== 9-Apr-2010::18:45:28 ===
    crasher:
    initial call: application_master:init/4
    pid: <0.31.0>
    registered_name: []
    exception exit: {bad_return,
    {{couch_app,start,
    [normal,
    ["/etc/couchdb/default.ini",
    "/etc/couchdb/local.ini"]]},
    {'EXIT',
    {{badmatch,{error,shutdown}},
    [{couch_server_sup,start_server,1},
    {application_master,start_it_old,4}]}}}}
    in function application_master:init/4
    ancestors: [<0.30.0>]
    messages: [{'EXIT',<0.32.0>,normal}]
    links: [<0.30.0>,<0.6.0>]
    dictionary: []
    trap_exit: true
    status: running
    heap_size: 987
    stack_size: 24
    reductions: 156
    neighbours:
    =INFO REPORT==== 9-Apr-2010::18:45:28 ===
    application: couch
    exited: {bad_return,{{couch_app,start,
    [normal,
    ["/etc/couchdb/default.ini",
    "/etc/couchdb/local.ini"]]},
    {'EXIT',{{badmatch,{error,shutdown}},
    [{couch_server_sup,start_server,1},
    {application_master,start_it_old,4}]}}}}
    type: temporary
    And for desktopcouch-pair
    Traceback (most recent call last):
    File "/usr/bin/desktopcouch-pair", line 57, in <module>
    from twisted.internet import gtk2reactor
    ImportError: No module named twisted.internet
    Has anyone experience this problem?
    Thanks
    Alphazo
    [EDIT]
    To get it working I had to :
    1) uninstall
    - couchdb 0.11.0-1
    - python-couchdb 0.6.1-1
    - desktopcouch 0.6.3-3
    - gwibber-new 2.29.94-1
    2) Update with local package (pacman -U)
    - erlang-R13B04-3-i686.pkg.tar.xz
    - spidermonkey-1.7.0-3-i686.pkg.tar.gz
    - httplib2-0.6.0-1-any.pkg.tar.gz
    - python-distutils-extra-2.16-1-any.pkg.tar.gz
    - python-egenix-mx-base-3.1.2-1-i686.pkg.tar.gz
    - python-imaging-1.1.7-1-i686.pkg.tar.gz
    - python-feedparser-4.1-4-i686.pkg.tar.gz
    - python-mako-0.2.5-1-any.pkg.tar.gz
    - python-simplejson-2.1.0-1-any.pkg.tar.xz
    - pywebkitgtk-1.1.7-1-i686.pkg.tar.gz
    - python-pycurl-7.19.0-4-i686.pkg.tar.xz
    3) Re-installed with yaourt:
    - couchdb 0.11.0-1
    - python-couchdb 0.6.1-1
    - desktopcouch 0.6.3-3
    - gwibber-new 2.29.94-1
    Last edited by alphazo (2010-04-09 19:50:08)

    After a 1.3GB upgrade (2.6.33, ssl, gtk, ssh...) I can no longer use Gwibber.
    I use the following components:
    aur/couchdb 0.11.0-1
    aur/python-couchdb 0.6.1-1
    aur/desktopcouch 0.6.3-3
    aur/gwibber-new 2.29.94-1
    When I start gwibber I get:
    Traceback (most recent call last):
    File "/usr/bin/gwibber", line 67, in <module>
    client.Client()
    File "/usr/lib/python2.6/site-packages/gwibber/client.py", line 447, in __init__
    self.w = GwibberClient()
    File "/usr/lib/python2.6/site-packages/gwibber/client.py", line 29, in __init__
    self.model = gwui.Model()
    File "/usr/lib/python2.6/site-packages/gwibber/gwui.py", line 42, in __init__
    self.settings = util.SettingsMonitor()
    File "/usr/lib/python2.6/site-packages/gwibber/util.py", line 91, in __init__
    DEFAULT_SETTINGS)
    File "/usr/lib/python2.6/site-packages/gwibber/microblog/util/couch.py", line 66, in __init__
    self.database = CouchDatabase(dbname, create=True)
    File "/usr/lib/python2.6/site-packages/desktopcouch/records/server.py", line 53, in __init__
    port = desktopcouch.find_port(ctx=ctx)
    File "/usr/lib/python2.6/site-packages/desktopcouch/__init__.py", line 51, in find_port
    return _direct_access_find_port(pid=pid, ctx=ctx)
    File "/usr/lib/python2.6/site-packages/desktopcouch/__init__.py", line 132, in __find_port__linux
    raise RuntimeError("Unable to find listening port")
    RuntimeError: Unable to find listening port
    When starting couchdb I get:
    Apache CouchDB 0.11.0 (LogLevel=info) is starting.
    =CRASH REPORT==== 9-Apr-2010::18:45:28 ===
    crasher:
    initial call: couch_event_sup:init/1
    pid: <0.79.0>
    registered_name: []
    exception exit: {{badmatch,
    {'EXIT',
    {{badmatch,{error,eacces}},
    [{couch_log,init,1},
    {gen_event,server_add_handler,4},
    {gen_event,handle_msg,5},
    {proc_lib,init_p_do_apply,3}]}}},
    [{couch_event_sup,init,1},
    {gen_server,init_it,6},
    {proc_lib,init_p_do_apply,3}]}
    in function gen_server:init_it/6
    ancestors: [couch_primary_services,couch_server_sup,<0.32.0>]
    messages: []
    links: [<0.78.0>,<0.5.0>]
    dictionary: []
    trap_exit: false
    status: running
    heap_size: 233
    stack_size: 24
    reductions: 116
    neighbours:
    =SUPERVISOR REPORT==== 9-Apr-2010::18:45:28 ===
    Supervisor: {local,couch_primary_services}
    Context: start_error
    Reason: {{badmatch,{'EXIT',{{badmatch,{error,eacces}},
    [{couch_log,init,1},
    {gen_event,server_add_handler,4},
    {gen_event,handle_msg,5},
    {proc_lib,init_p_do_apply,3}]}}},
    [{couch_event_sup,init,1},
    {gen_server,init_it,6},
    {proc_lib,init_p_do_apply,3}]}
    Offender: [{pid,undefined},
    {name,couch_log},
    {mfa,{couch_log,start_link,[]}},
    {restart_type,permanent},
    {shutdown,brutal_kill},
    {child_type,worker}]
    =SUPERVISOR REPORT==== 9-Apr-2010::18:45:28 ===
    Supervisor: {local,couch_server_sup}
    Context: start_error
    Reason: shutdown
    Offender: [{pid,undefined},
    {name,couch_primary_services},
    {mfa,{couch_server_sup,start_primary_services,[]}},
    {restart_type,permanent},
    {shutdown,infinity},
    {child_type,supervisor}]
    =CRASH REPORT==== 9-Apr-2010::18:45:28 ===
    crasher:
    initial call: application_master:init/4
    pid: <0.31.0>
    registered_name: []
    exception exit: {bad_return,
    {{couch_app,start,
    [normal,
    ["/etc/couchdb/default.ini",
    "/etc/couchdb/local.ini"]]},
    {'EXIT',
    {{badmatch,{error,shutdown}},
    [{couch_server_sup,start_server,1},
    {application_master,start_it_old,4}]}}}}
    in function application_master:init/4
    ancestors: [<0.30.0>]
    messages: [{'EXIT',<0.32.0>,normal}]
    links: [<0.30.0>,<0.6.0>]
    dictionary: []
    trap_exit: true
    status: running
    heap_size: 987
    stack_size: 24
    reductions: 156
    neighbours:
    =INFO REPORT==== 9-Apr-2010::18:45:28 ===
    application: couch
    exited: {bad_return,{{couch_app,start,
    [normal,
    ["/etc/couchdb/default.ini",
    "/etc/couchdb/local.ini"]]},
    {'EXIT',{{badmatch,{error,shutdown}},
    [{couch_server_sup,start_server,1},
    {application_master,start_it_old,4}]}}}}
    type: temporary
    And for desktopcouch-pair
    Traceback (most recent call last):
    File "/usr/bin/desktopcouch-pair", line 57, in <module>
    from twisted.internet import gtk2reactor
    ImportError: No module named twisted.internet
    Has anyone experience this problem?
    Thanks
    Alphazo
    [EDIT]
    To get it working I had to :
    1) uninstall
    - couchdb 0.11.0-1
    - python-couchdb 0.6.1-1
    - desktopcouch 0.6.3-3
    - gwibber-new 2.29.94-1
    2) Update with local package (pacman -U)
    - erlang-R13B04-3-i686.pkg.tar.xz
    - spidermonkey-1.7.0-3-i686.pkg.tar.gz
    - httplib2-0.6.0-1-any.pkg.tar.gz
    - python-distutils-extra-2.16-1-any.pkg.tar.gz
    - python-egenix-mx-base-3.1.2-1-i686.pkg.tar.gz
    - python-imaging-1.1.7-1-i686.pkg.tar.gz
    - python-feedparser-4.1-4-i686.pkg.tar.gz
    - python-mako-0.2.5-1-any.pkg.tar.gz
    - python-simplejson-2.1.0-1-any.pkg.tar.xz
    - pywebkitgtk-1.1.7-1-i686.pkg.tar.gz
    - python-pycurl-7.19.0-4-i686.pkg.tar.xz
    3) Re-installed with yaourt:
    - couchdb 0.11.0-1
    - python-couchdb 0.6.1-1
    - desktopcouch 0.6.3-3
    - gwibber-new 2.29.94-1
    Last edited by alphazo (2010-04-09 19:50:08)

  • Playing music VERY slow after 3.0 upgrade

    I have a 32GB ipod touch bought in Feb 2008 (does that make it 2G?). If I listen to my songs in 'shuffle' mode, or with a large playlist, the ipod is extremely slow and unresponsive. After pressing the 'shuffle' button I have to wait about 10-15 seconds before a song starts playing. The touch controls also become very sluggish when playing songs. If I press the 'next' button there's often a 15 second delay before the screen updates and the artwork changes. During this time the controls on the ipod are also frozen which makes it impossible to skip through songs on shuffle mode.
    Any idea what's happening or what I can do to fix this?
    I'd rather lose half of the new features and just have my ipod play songs properly!

    i am also having this problem. if i synch my first generation ipod touch and then try to play music, it says "Updating Library ... this may take a few minutes". then, if i try to play playlists with lots of songs (1000+) the controls are very sluggish, taking 5 - 15 seconds before allowing me to skip to the next song. but, it seems to "fix" itself after a minute or two. i wonder if it is indexing something in the background that it making it run slow? maybe related to the new spotlight feature? i have restored alredy. any advice?

  • DB02 running very slowly after SQL 2005 Upgrade!

    Hi All
    I have reciently upgraded our DEV ECC6 system to SQL 2005 and everything seemed ok - no problems really! However when we run DB02, to retrieve DB information it is taking about 4 to 5 mins to appear. This is obviously not good!
    Has anyone else had this problem, and if so is there something that needs to be done?
    Thanks
    Phil

    Hi Phil,
    Have you ensure that all the standard background job as per note 16083?
    Thanks and Regards
    Point reward is much appreciated

  • My macbook pro is running very slow after upgrading to version 10.9.1  Here are the results of running EtreCheck:

    I am running very slowly after upgrading to ver 10.9.1 on my macbook pro.  Can anyone help me to solve this problem.  I am including the results from running Etresoft.
    Hardware Information:
              MacBook Pro (15-inch, Mid 2010)
              MacBook Pro - model: MacBookPro6,2
              1 2.53 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics - VRAM: 288 MB
              NVIDIA GeForce GT 330M - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
    Disk Information:
              Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Internal Memory Card Reader
              Western Digital My Passport 071A 1 TB
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
              Apple Computer, Inc. IR Receiver
              Apple Inc. Built-in iSight
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.kodak.aio.kcpconnector.plist
              [loaded] com.leapfrog.connect.shell.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.sonos.smbbump.plist
    Launch Agents:
              [loaded] com.kodak.BonjourAgent.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [loaded] com.google.keystone.agent.plist
              [loaded] com.kodak.KODAK AiO Firmware Updater.plist
              [loaded] com.kodak.KODAK AiO Software Updater.plist
              [loaded] com.kodak.StatisticCollection.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] uk.co.markallan.clamxav.freshclam.plist
    User Login Items:
              Monitor
              ScanSnap Manager
              Evernote
              Dropbox
              AdobeResourceSynchronizer
    3rd Party Preference Panes:
              Flash Player
              Growl
    Internet Plug-ins::
              Flip4Mac WMV Plugin: Version: 2.3.8.1
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 10.1.8
              AdobePDFViewer: Version: 10.1.8
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
              Silverlight: Version: 4.0.51204.0
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins::
              Google Earth Web Plug-in: Version: 7.1
              Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
    Bad Fonts:
              None
    Old applications:
              AiOFirmwareUpdater:          Version: 7.7 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
              Install Spotify:          Version: 1.0 - SDK 10.5
                        /Users/jimschindler/Downloads/Install Spotify.app
              KODAK AiO Home Center:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
              KODAK AiO Scan:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
              KODAK AiO Software Updater:          Version: 7.7 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
              KODAK AiO Uninstall:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
              Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
              Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
              Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
              Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
              Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Document Connection.app
              Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
              Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Excel.app
              Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
              Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Outlook.app
              Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
              Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
              Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
              Microsoft Word:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Word.app
              My Day:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/My Day.app
              Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
              Registration:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/Registration.app
              Solver:          Version: 1.0 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              Spotify:          Version: 0.8.4.124.ga3559d86 - SDK 10.5
                        /Applications/Spotify.app
              SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
              Destinations:
                        Backup [Local] (Last used)
                        Total size: 931.17 GB
                        Total number of backups: 85
                        Oldest backup: 2013-02-13 18:40:47 +0000
                        Last backup: 2013-12-31 17:59:26 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.17 GB > (Disk used 277.92 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  29%          Mail
                   3%          WindowServer
                   2%          mtmd
                   1%          EtreCheck
                   0%          NETGEARGenieDaemon
    Top Processes by Memory:
              410 MB          mds_stores
              238 MB          Evernote
              229 MB          Mail
              147 MB          iBank
              123 MB          WindowServer
    Virtual Memory Statistics:
              3.36 GB          Free RAM
              2.92 GB          Active RAM
              621 MB          Inactive RAM
              1.11 GB          Wired RAM
              1.67 GB          Page-ins
              0 B          Page-outs

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Computer randomly shuts down/Very unstable since upgrade to yosemite

    Since upgrading to yosemite my computer has become very unstable.
    For anyone that can help with what may be causing this issue I would really
    appreciate it. As for "Adobe" being a possible cause, how can I determine
    which Adobe program and related files are the culprit?
    Thank you very much to anyone who offer's their support and help.
    EtreCheck version: 2.1.8 (121)
    Report generated February 10, 2015 at 12:59:00 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 209
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:9:57
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (62.33 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 15
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Roxio
        [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
            /System/Library/Extensions
        [loaded]    com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.4) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.4) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Click for support]
        [not loaded]    com.symantec.kext.ips (1.3.1f6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [not loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [not loaded]    com.epson.eventmanager.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.rim.BBAlbumArtCacher.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [failed]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
        [running]    com.rim.BBDaemon.plist [Click for support]
        [running]    com.smithmicro.schedulerdaemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [failed]    com.avast.home.userinit.plist [Click for support]
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [not loaded]    com.smithmicro.cleaning.schedulermailer.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        BlackBerry Device Manager    Application  (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        Open in Internet Explorer
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 256.51 GB
        Destinations:
            Data [Network]
            Total size: 3.00 TB
            Total number of backups: 30
            Oldest backup: 2014-12-22 10:14:08 +0000
            Last backup: 2015-02-10 02:49:48 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
             7%    WindowServer
             1%    Google Chrome
             0%    opendirectoryd
    Top Processes by Memory: ℹ️
        129 MB    Google Chrome
        103 MB    Safari
        90 MB    WindowServer
        73 MB    Spotlight
        64 MB    Finder
    Virtual Memory Information: ℹ️
        81 MB    Free RAM
        1.50 GB    Active RAM
        1.41 GB    Inactive RAM
        1.05 GB    Wired RAM
        1.66 GB    Page-ins
        21 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 10, 2015, 12:42:48 PM    Self test - passed
        Feb 9, 2015, 05:23:10 PM    /Library/Logs/DiagnosticReports/mdworker_2015-02-09-172310_[redacted].crash

    A number of problems exist including the likelihood of system corruption as a result of using CleanMyMac.
    It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
    There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
    Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system.
    Besides CleanMyMac2, garbage "cleaning" and "anti-virus" software exists, specifically "Avast", "Smith Micro", and "Symantec / Norton". Those products should not be installed on any Mac, because they convey no benefit and are only capable of creating or contributing to problems.
    In addition, that Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file
    The recovery procedure that follows will obviate the need to correct all those separate problems and is likely to require the least amount of your time and interaction.
    Follow the applicable recovery procedure below:
    If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
    If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
    The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
    When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
    Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
    To erase and install Yosemite read: OS X Yosemite: Erase and reinstall OS X
    To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device.

  • My Arch is very slow after upgrading to kernel 3.0

    Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)...  I would like you to help me to solve a problem: as i wrote in object  my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

    However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
    EDIT: I've checked but no error is shown....this is dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
    [ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 118000000 mask FF8000000 uncachable
    [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
    [ 0.000000] 0000000000 - 00dee00000 page 2M
    [ 0.000000] 00dee00000 - 00dee74000 page 4k
    [ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
    [ 0.000000] 0100000000 - 0118000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
    [ 0.000000] RAMDISK: 37c76000 - 37e33000
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
    [ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000def2df40 00040
    [ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
    [ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
    [ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000118000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
    [ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00118000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000dee74
    [ 0.000000] 0: 0x00100000 -> 0x00118000
    [ 0.000000] On node 0 totalpages: 1011202
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1344 pages used for memmap
    [ 0.000000] Normal zone: 96960 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
    [ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
    [ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
    [ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
    [ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
    [ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
    [ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
    [ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
    [ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
    [ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
    [ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
    [ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
    [ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
    [ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] spurious 8259A interrupt: IRQ7.
    [ 0.003333] Detected 2127.784 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000120] Security Framework initialized
    [ 0.000125] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001968] Mount-cache hash table entries: 256
    [ 0.002354] Initializing cgroup subsys cpuacct
    [ 0.002387] Initializing cgroup subsys memory
    [ 0.002403] Initializing cgroup subsys devices
    [ 0.002406] Initializing cgroup subsys freezer
    [ 0.002408] Initializing cgroup subsys net_cls
    [ 0.002410] Initializing cgroup subsys blkio
    [ 0.002461] CPU: Physical Processor ID: 0
    [ 0.002462] CPU: Processor Core ID: 0
    [ 0.002468] mce: CPU supports 9 MCE banks
    [ 0.002478] CPU0: Thermal monitoring handled by SMI
    [ 0.002487] using mwait in idle threads.
    [ 0.003640] ACPI: Core revision 20110413
    [ 0.019108] ftrace: allocating 16144 entries in 64 pages
    [ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
    [ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.163161] ... version: 3
    [ 0.163162] ... bit width: 48
    [ 0.163164] ... generic registers: 4
    [ 0.163165] ... value mask: 0000ffffffffffff
    [ 0.163167] ... max period: 000000007fffffff
    [ 0.163168] ... fixed-purpose events: 3
    [ 0.163169] ... event mask: 000000070000000f
    [ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.209823] Booting Node 0, Processors #1
    [ 0.209829] smpboot cpu 1: start_ip = 99000
    [ 0.303122] CPU1: Thermal monitoring handled by SMI
    [ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.343129] #2
    [ 0.343133] smpboot cpu 2: start_ip = 99000
    [ 0.436405] CPU2: Thermal monitoring handled by SMI
    [ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.476405] #3
    [ 0.476409] smpboot cpu 3: start_ip = 99000
    [ 0.569682] CPU3: Thermal monitoring handled by SMI
    [ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.596326] Brought up 4 CPUs
    [ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
    [ 0.598893] devtmpfs: initialized
    [ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
    [ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
    [ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
    [ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
    [ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
    [ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
    [ 0.600970] print_constraints: dummy:
    [ 0.601050] NET: Registered protocol family 16
    [ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.601159] ACPI: bus type pci registered
    [ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.613921] PCI: Using configuration type 1 for base access
    [ 0.614412] bio: create slab <bio-0> at 0
    [ 0.616187] ACPI: EC: Look up EC in DSDT
    [ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647118] ACPI: Dynamic OEM Table Load:
    [ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.647646] ACPI: Dynamic OEM Table Load:
    [ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.667016] ACPI: Dynamic OEM Table Load:
    [ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.676844] ACPI: Dynamic OEM Table Load:
    [ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 1.089727] ACPI: Interpreter enabled
    [ 1.089731] ACPI: (supports S0 S3 S4 S5)
    [ 1.089754] ACPI: Using IOAPIC for interrupt routing
    [ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.120814] ACPI: No dock devices found.
    [ 1.120815] HEST: Table not found.
    [ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.121147] \_SB_.PCI0:_OSC invalid UUID
    [ 1.121149] _OSC request data:1 8 1f
    [ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
    [ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.121761] pci 0000:00:01.0: PME# disabled
    [ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
    [ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.121927] pci 0000:00:16.0: PME# disabled
    [ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
    [ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.122088] pci 0000:00:1a.0: PME# disabled
    [ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
    [ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.122223] pci 0000:00:1b.0: PME# disabled
    [ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.122337] pci 0000:00:1c.0: PME# disabled
    [ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.122451] pci 0000:00:1c.1: PME# disabled
    [ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
    [ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.122565] pci 0000:00:1c.2: PME# disabled
    [ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
    [ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.122686] pci 0000:00:1c.5: PME# disabled
    [ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
    [ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.122844] pci 0000:00:1d.0: PME# disabled
    [ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
    [ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
    [ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
    [ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
    [ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
    [ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
    [ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    [ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
    [ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.123214] pci 0000:00:1f.2: PME# disabled
    [ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
    [ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
    [ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    [ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
    [ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
    [ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
    [ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
    [ 1.123443] pci 0000:01:00.0: supports D1 D2
    [ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
    [ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
    [ 1.123555] pci 0000:01:00.1: supports D1 D2
    [ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
    [ 1.123783] pci 0000:02:00.0: supports D1
    [ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.123790] pci 0000:02:00.0: PME# disabled
    [ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
    [ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
    [ 1.124115] pci 0000:03:00.0: supports D1 D2
    [ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124123] pci 0000:03:00.0: PME# disabled
    [ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
    [ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
    [ 1.124336] pci 0000:03:00.1: supports D1 D2
    [ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124344] pci 0000:03:00.1: PME# disabled
    [ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
    [ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
    [ 1.124554] pci 0000:03:00.4: supports D1 D2
    [ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124562] pci 0000:03:00.4: PME# disabled
    [ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
    [ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
    [ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
    [ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
    [ 1.125967] pci 0000:04:00.0: supports D1 D2
    [ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.126008] pci 0000:04:00.0: PME# disabled
    [ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    [ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
    [ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.126997] \_SB_.PCI0:_OSC invalid UUID
    [ 1.126998] _OSC request data:1 1f 1f
    [ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.127035] \_SB_.PCI0:_OSC invalid UUID
    [ 1.127037] _OSC request data:1 0 1d
    [ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
    [ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
    [ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
    [ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.131826] vgaarb: loaded
    [ 1.131827] vgaarb: bridge control possible 0000:01:00.0
    [ 1.131900] PCI: Using ACPI for IRQ routing
    [ 1.134142] PCI: pci_cache_line_size set to 64 bytes
    [ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
    [ 1.134372] NetLabel: Initializing
    [ 1.134374] NetLabel: domain hash size = 128
    [ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.134389] NetLabel: unlabeled traffic allowed by default
    [ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.136441] Switching to clocksource hpet
    [ 1.139456] Switched to NOHz mode on CPU #0
    [ 1.139583] Switched to NOHz mode on CPU #1
    [ 1.139590] Switched to NOHz mode on CPU #2
    [ 1.139598] Switched to NOHz mode on CPU #3
    [ 1.142357] pnp: PnP ACPI init
    [ 1.142375] ACPI: bus type pnp registered
    [ 1.142679] pnp 00:00: [bus 00-3e]
    [ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
    [ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.142841] pnp 00:01: [io 0x0000-0x001f]
    [ 1.142843] pnp 00:01: [io 0x0081-0x0091]
    [ 1.142844] pnp 00:01: [io 0x0093-0x009f]
    [ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.142848] pnp 00:01: [dma 4]
    [ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.143008] pnp 00:04: [io 0x00f0]
    [ 1.143019] pnp 00:04: [irq 13]
    [ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.143054] pnp 00:05: [io 0x002e-0x002f]
    [ 1.143056] pnp 00:05: [io 0x004e-0x004f]
    [ 1.143057] pnp 00:05: [io 0x0061]
    [ 1.143059] pnp 00:05: [io 0x0063]
    [ 1.143061] pnp 00:05: [io 0x0065]
    [ 1.143062] pnp 00:05: [io 0x0067]
    [ 1.143064] pnp 00:05: [io 0x0070]
    [ 1.143065] pnp 00:05: [io 0x0080]
    [ 1.143066] pnp 00:05: [io 0x0092]
    [ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.143070] pnp 00:05: [io 0x0680-0x069f]
    [ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
    [ 1.143073] pnp 00:05: [io 0xff10-0xff13]
    [ 1.143075] pnp 00:05: [io 0x0800-0x0803]
    [ 1.143076] pnp 00:05: [io 0x0400-0x047f]
    [ 1.143078] pnp 00:05: [io 0x0500-0x057f]
    [ 1.143080] pnp 00:05: [io 0x164e-0x164f]
    [ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
    [ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
    [ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
    [ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143166] pnp 00:06: [io 0x0070-0x0077]
    [ 1.143171] pnp 00:06: [irq 8]
    [ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.143218] pnp 00:07: [io 0x0060]
    [ 1.143220] pnp 00:07: [io 0x0064]
    [ 1.143225] pnp 00:07: [irq 1]
    [ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.143262] pnp 00:08: [irq 12]
    [ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
    [ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
    [ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
    [ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
    [ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
    [ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
    [ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
    [ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
    [ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143900] pnp 00:0a: [bus 3f]
    [ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.157077] pnp: PnP ACPI: found 11 devices
    [ 1.157079] ACPI: ACPI bus type pnp unregistered
    [ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
    [ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    [ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
    [ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163296] pci 0000:00:01.0: setting latency timer to 64
    [ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
    [ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
    [ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
    [ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
    [ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
    [ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
    [ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    [ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    [ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163511] NET: Registered protocol family 2
    [ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.168016] TCP reno registered
    [ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168344] NET: Registered protocol family 1
    [ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832352] pci 0000:01:00.0: Boot video device
    [ 3.832384] PCI: CLS 64 bytes, default 64
    [ 3.832433] Unpacking initramfs...
    [ 3.861003] Freeing initrd memory: 1780k freed
    [ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
    [ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
    [ 3.861787] audit: initializing netlink socket (disabled)
    [ 3.861799] type=2000 audit(1313594250.696:1): initialized
    [ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 3.886559] VFS: Disk quotas dquot_6.5.2
    [ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 3.886869] msgmni has been set to 7638
    [ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 3.887147] io scheduler noop registered
    [ 3.887150] io scheduler deadline registered
    [ 3.887202] io scheduler cfq registered (default)
    [ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
    [ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
    [ 3.887674] vesafb: scrolling: redraw
    [ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
    [ 4.087472] Console: switching to colour frame buffer device 200x56
    [ 4.281840] fb0: VESA VGA frame buffer device
    [ 4.281854] intel_idle: MWAIT substates: 0x1120
    [ 4.281856] intel_idle: v0.4 model 0x25
    [ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 4.281902] ERST: Table is not found!
    [ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.469026] Linux agpgart interface v0.103
    [ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 4.473591] mousedev: PS/2 mouse device common for all mice
    [ 4.473653] rtc_cmos 00:06: RTC can wake from S4
    [ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 4.473886] cpuidle: using governor ladder
    [ 4.474031] cpuidle: using governor menu
    [ 4.474245] TCP cubic registered
    [ 4.474248] NET: Registered protocol family 17
    [ 4.474257] Registering the dns_resolver key type
    [ 4.474353] PM: Checking hibernation image partition /dev/sda9
    [ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.502184] PM: Hibernation image not present or could not be loaded.
    [ 4.502194] registered taskstats version 1
    [ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
    [ 4.512569] Initializing network drop monitor service
    [ 4.516031] Freeing unused kernel memory: 712k freed
    [ 4.516201] Write protecting the kernel read-only data: 6144k
    [ 4.516747] Freeing unused kernel memory: 12k freed
    [ 4.522858] Freeing unused kernel memory: 776k freed
    [ 4.564188] udevd[93]: starting version 173
    [ 4.566281] ACPI: acpi_idle yielding to intel_idle
    [ 4.624591] SCSI subsystem initialized
    [ 4.630767] libata version 3.00 loaded.
    [ 4.632419] ahci 0000:00:1f.2: version 3.0
    [ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.632554] ahci: SSS flag set, parallel bus scan disabled
    [ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
    [ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.634910] scsi0 : ahci
    [ 4.635536] scsi1 : ahci
    [ 4.636083] scsi2 : ahci
    [ 4.636721] scsi3 : ahci
    [ 4.637168] scsi4 : ahci
    [ 4.637475] scsi5 : ahci
    [ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
    [ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
    [ 4.637733] ata3: DUMMY
    [ 4.637734] ata4: DUMMY
    [ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
    [ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
    [ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
    [ 4.861939] Switching to clocksource tsc
    [ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
    [ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.975693] ata1.00: configured for UDMA/133
    [ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
    [ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
    [ 5.303748] ata2.00: configured for UDMA/100
    [ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
    [ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
    [ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
    [ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.667393] udevd[273]: starting version 173
    [ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 10.447052] ACPI: Lid Switch [LID0]
    [ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 10.449952] ACPI: Power Button [PWRB]
    [ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
    [ 10.484243] acpi device:4b: registered as cooling_device4
    [ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
    [ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
    [ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
    [ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
    [ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
    [ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 10.773153] iTCO_vendor_support: vendor-support=0
    [ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.926971] sky2: driver version 1.28
    [ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
    [ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
    [ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
    [ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
    [ 11.030984] usbcore: registered new interface driver usbfs
    [ 11.031163] usbcore: registered new interface driver hub
    [ 11.031208] usbcore: registered new device driver usb
    [ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
    [ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
    [ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
    [ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.269177] mei 0000:00:16.0: setting latency timer to 64
    [ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 11.354358] sdhci: Secure Digital Host Controller Interface driver
    [ 11.354362] sdhci: Copyright(c) Pierre Ossman
    [ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
    [ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
    [ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 11.389714] hub 1-0:1.0: USB hub found
    [ 11.389721] hub 1-0:1.0: 2 ports detected
    [ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
    [ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
    [ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 11.406377] hub 2-0:1.0: USB hub found
    [ 11.406382] hub 2-0:1.0: 2 ports detected
    [ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
    [ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
    [ 11.515145] Registered led device: mmc0::
    [ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
    [ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
    [ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
    [ 11.515308] Registered led device: mmc1::
    [ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
    [ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
    [ 11.823379] hub 1-1:1.0: USB hub found
    [ 11.823555] hub 1-1:1.0: 6 ports detected
    [ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
    [ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 11.931327] ath: EEPROM regdomain: 0x65
    [ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
    [ 11.931333] ath: Country alpha2 being used: 00
    [ 11.931334] ath: Regpair used: 0x65
    [ 12.053537] hub 2-1:1.0: USB hub found
    [ 12.053638] hub 2-1:1.0: 8 ports detected
    [ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 12.058344] Disabling lock debugging due to kernel taint
    [ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
    [ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
    [ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
    [ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 12.090577] pci 0000:01:00.0: setting latency timer to 64
    [ 12.090779] [fglrx] Kernel PAT support is enabled
    [ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
    [ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 12.101452] Registered led device: ath9k-phy0
    [ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
    [ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
    [ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
    [ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 12.387463] cfg80211: World regulatory domain updated:
    [ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387493] cfg80211: Calling CRDA for country: IT
    [ 12.390329] cfg80211: Regulatory domain changed to country: IT
    [ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
    [ 12.939879] Linux media interface: v0.10
    [ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
    [ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
    [ 12.994502] usbcore: registered new interface driver usbhid
    [ 12.994504] usbhid: USB HID core driver
    [ 13.030968] Linux video capture interface: v2.00
    [ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
    [ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
    [ 13.061057] usbcore: registered new interface driver uvcvideo
    [ 13.061059] USB Video Class driver (v1.1.0)
    [ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 15.505206] SGI XFS Quota Management subsystem
    [ 15.527846] XFS (sda10): Mounting Filesystem
    [ 16.058466] XFS (sda10): Ending clean mount
    [ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
    [ 16.172257] REISERFS (device sda8): using ordered data mode
    [ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
    [ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
    [ 16.362086] EXT3-fs: barriers not enabled
    [ 16.377355] kjournald starting. Commit interval 5 seconds
    [ 16.377554] EXT3-fs (sda6): using internal journal
    [ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
    [ 16.475339] fuse init (API version 7.16)
    [ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
    Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

  • IPhone 4 8GB white working very slow after upgrading to IOS7

    Phone 4 8GB white working very slow after upgrading to IOS7

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • ITunes will not sync with ipod when music is not on C drive in Windows 7

    For years I have used various versions of windows and itunes, always having my data on a different drive that the system with no issues. I am currently using Windows 7 RC1 and generally finding it far better than Vista. My problem is that although iT

  • ECS and SEcess field missing in Excise Invoice Tab in MIGO

    What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO. Went through few threads but was unable to get a solution......

  • Trouble activating Adobe Muse CC on Windows 8.1

    Every other Adobe CC product is activated and seems to work When starting Adobe Muse I get a message that tells me that I need to connect to the internet to activate it. Then it tells me that it can't connect to the internet. Then it tells me to retr

  • Problem with approving standard workflows.

    We are testing workflows in Content DB prior to initiating a larger project. We have defined a serial approval workflow for uploading a file to a folder. When a file is uploaded, the approver can see the request but is not given the possibility to ap

  • How do you make some pictures in your iphoto library, eyes only protected

    I want to make some of my pictures unviewable except by password or something so they are not accessible to the whole family, for example I bought my wife a present and took a picture of it to send to her dad and brother. She opened iphoto and you gu