[SOLVED] just installed gnome, recommended wireless internet..

I just installed gnome and I have my b43 broadcom working (through terminal configuration).  How do I go about installing an applet on my panel to select wireless networks? (yes, similar to ubuntu..)
Last edited by playdafunkimuzic (2008-12-30 19:29:19)

I use WPA and the Wicd only connect with Preshared Key and with Passphrase doesn't work I don't know why.
A sugestion: Use WPA instead, because WEP is very simple to break with simple tools:
kismet: to detect your wireless network
aircrack-ng: to crack your WEP protection
wireshark: to sniff your packages
Last edited by alessandro_ufms (2008-12-31 15:25:26)

Similar Messages

  • HT1365 just installed a new wireless router (cisco linkseys E1200) and our apple laptops connect fine on one floor but lose connectivity when moved to another.  Other non apple laptops & Ipad connect with no problem no matter what floor they are on

    We just installed a new wireless router to our main PC.  It's a Cisco Linkseys E1200.  All other wireless devices were able to connect without a problem, including my Ipad.  We have 2 Macbook Pro laptops.  They both connect just fine when on the same floor of our house as the router, but when we take them upstairs to the 2nd floor of the house, they lose connectivity and it states the wireless password is not the correct password.  All other 2nd floor laptops have no problem at all with connectivity no matter where they are in the house.  Please help- my husband is on the verge of selling Apple if that cannot be remedied. 

    This would not be a security issue symptom. I would consider checking for sources of wireless interference HT1365
    Trying changing the radio channel on your wireless network.

  • HT3874 I have just installed the recommended updates which has resulted in Suitcase no longer being able to open. I am running 10.6.8. I am on a deadline so would be grateful for some help!

    I would be grateful if I could get some help regarding Suitcase. I just installed three updates that were recommended (one was for iTunes, another a security update and to be honest, can't even remember what the third one was for). Anyway, after two restarts I can no longer run Suitcase which is a bit of a disaster as I working to deadline and I need Word and Quark XPress.
    What can I do? Suggestions most welcome with urgency!
    Many thanks,
    kkb

    Hi there
    Thank you for your response – I am running 10.6.8 (apologies for any confusion if I didn't make it clear in my earlier post).
    I have just returned from a meeting so was pleasantly surprised to see so many responses. And I normally *do* know better and in my old job I would have never updated whilst on a deadline. Somehow working from home (only my second week) has made me forget all the rules!
    I am a bit scared of removing anything or reinstalling at the mo. But I will look into it. I feel quite out of touch with how Macs operate now (I was clearer about OS9). But thank you and fingers crossed that it works!

  • Macbook pro just stopped connecting to wireless internet.

    I have tried restarting it and deleting the old usernames and paswords, but nothing works. I thought it might be an  internet problem but i am having the same problem at home and school.
    Can anyone help me?

    My macbook stopped connecting to wireless internet. Ive tried everything. HELP!
    Open System Preferences then select the Network tab.
    Cick Assist me... then click Diagnostics
    If any of the buttons on the left are red click Continue.
    That should help narrow down whether it's Wi-Fi or your settings or your ISP.
    Might be something in this article you haven't tried yet >  Troubleshooting Wi-Fi issues

  • [SOLVED]problem with GNOME and wireless connection

    Hi!
    I'm new to Arch Linux, and have run into a few problems after installation.
    My computer is a HP Pavilion dv6000.
    I installed using "xf86-video-nouveau" driver, as i understand this is the best choice for "Nvidia Geforce Go 7400". Is it?
    I also installed the complete "gnome", "gnome-extra", "gdm", "gnome-tweak-tool" and "gnome-shell-extensions" packages, but when I boot into gdm login, it automatically starts in fallback mode (the one who has "applications" and "places" in the top panel instead of "activities". What am I doing wrong here?
    Btw, when I go to System settings - system info - graphics, there are three lines; "Driver", "Experience", "Forced Fallback Mode". "Driver" line only says driver, and is blank after. "Experience" line says "Fallback".  "Forced Fallback Mode" is set to OFF.
    Also, I cannot figure out how to get my wireless network set up correctly.
    When i open System Settings - Network, I get an error saying System network is not compatible with this version.
    Any help with this woill be greatly appreciated!
    $ iwconfig
    lo        no wireless extensions.
    wlan0     IEEE 802.11abg  ESSID:off/any 
              Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:on
    eth0      no wireless extensions.
    Last edited by pkuvaas (2012-01-18 21:57:46)

    pkuvaas wrote:
    Thanks!
    -dri driver worked. But if the NVIDIA driver works better, I should probably consider using that one.
    I tried to install the NVIDIA binary driver, but when i tried to run
    # chmod -X NVIDIA-Linux-x86-290.10.run
    # ./NVIDIA-Linux-x86-290.10.run
    I got a message telling me to close x first.
    How can I do this?
    Ho ho ho buddy, I see you're trying to install the nvidia driver from the website. Have another look here:
    https://wiki.archlinux.org/index.php/Nvidia#Installing
    the drivers are available through pacman Installing the driver through pacman will automatically take care of removing things that conflict and installing things you need to ge t the NVIDIA driver to work.
    NVIDIA _might_ be better, 3d support in nouveau is still somewhat experimental and nouveau doesn't have all the power management features yet. It'll be something to experiment with. Have a good read of the NVIDIA and NOUVEAU wiki articles
    pkuvaas wrote:
    As for the wireless issue, I googled around a bit and found that the driver I need is ilw3945.
    I added this to /etc/rc.conf:
    DAEMONS=(...ilw3945...)
    as it seems the drivers are included in udev.
    However, when i try to open System Settings -> Network, it says
    The system network services are not compatible with this version.
    So I'm getting a little restless to find out what I can do to get the wireless network configurated properly, and how I can do it.
    Any ideas?
    First I think you've fundamentally misunderstood something. Drivers for linux come in module form, not in DAEMON form. A DAEMON is an application that runs in the background (sound server, network service, etc etc).
    ilw3945 would have to be added to your MODULES section in /etc/rc.conf if that is the module you need.
    humor me and post the output of this command:
    $ lspci

  • Just installed Lion.  Chesscube internet chess no longer works. Plug-in failure. Any suggestions.

    I am looking for help with a Plug-in failure for the website Chesscube.com.  It used to work before I installed Liion.  Now I just get a black screen and the message Plug-in failure.  Any ideas?

    Hey ddouglas9,
    The plug-in failure is likely shockwave flash. Your best bet would be to uninstall Adobe Flash completely, and re-install it.
    If you're still struggling perhaps contact their help centre - [email protected].
    -Craig

  • [SOLVED] Problem installing gnome-extra packages

    I have completed the installation and all that left is gnome-extra packages. I fetched the packages and after the integrity check it says
    Failed to commit transaction invalid or corrupted packages
    gnome-games-3.0.21- <pacgae_info> is either invalid or corrupted
    and the installation exits.
    Now how do I fix this. I tried forcing the upgrade process by pacman -Syu but to no avail. Can you help me fixing the issue.
    Regards
    Last edited by Shashwat (2011-06-04 09:42:46)

    Ok I solved the problem.
    First I removed the problematic packages from /var/cache/pacman/pkg and then used rankmirrors to get the best mirror.
    After that used pacman -Syy to refresh and reinstalled the gnome-extra package .. Working fine
    Thanks

  • [SOLVED] Just installed KDE 4.6, desktop effects don't work.

    When I try to enable KDE's desktop effects the screen goes haywire and everything is black with nasty distorted lines. Then everything returns after a little while and KDE shows a popup notification saying that "desktop effects were too slow and have been suspended...".
    I'm pretty sure my xorg.conf is configured perfectly, I've read everything there is to know about that. I was previously on Gnome with Compiz working flawlessly, so I have a feeling its not a video problem. There's always a small chance I could be wrong though.
    Could it be a video driver problem? If so, what should I do about that?
    Any idea what might be wrong?
    Last edited by amadar (2011-04-24 23:25:03)

    I'm using xf86-video-ati with my ATI card.
    I initially tried Gnome, but for some reason, gnome-shell just wouldn't start, so that why I ended up trying KDE. Once in KDE, i had this described problem.I couldn't fix it, and it was crashing (100% CPU usage sometimes), so I switched back to Gnome 3 to attempt to get the shell running. Finally, I figured out that you must not add "nomodeset" to the kernel boot line in order for gnome-shell to work, so I removed that from the end of my line and gnome-shell worked!
    It might be possible that this is the solution for the KDE graphic problem as well... I'm testing it right now, i'll be back to post it after the restart...
    Last edited by amadar (2011-04-24 23:03:03)

  • Just installed Mac OS X 10.6.8 on my i5 iMac and now safari and app store crash my Mac, any suggestions or similar experiences

    Just installed a recommended upgrade of Mac OS X 10.6.8 on my iMac i5, now when I launch safari or app store it crashes. I was looking to upgrade to Lion this week but cannot open the app store. facetab, safari and app store all crash so far, every time I open them unfortunatley as I have no time machine back up I don't know what to do!!!

    I have the same issue on my macbook - but only with the app store. although, I haven't tried safari since I use FF. Any resolutions out there??  10.6.8 - cant run the 10.6.6 update combot that seems to fix the issue with other folks.

  • Firefow will not open at all on one computer and on the other it opens but will not load. I just added a new wireless router, could this have anything to do with it, it had been working fine up until I installed it Tuesday night. Internet explorer won't

    I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)

    Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
    Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual.

  • How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

    Hi guys I just bught a
    WVC210 Wireless-G PTZ Internet Camera
    I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
    I would like if some one can send me a video tutorial on how to do it.
    I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
    I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
    For exaple: www.example.com/mycamera???
    If not well I would love to here the options I have.
    Thank you very much in advance!

    Rogerio,
    I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • Can't login after fresh installing gnome using gdm 3.2 [SOLVED]

    I don't know if this topic was already solved, I hope someone can help me about this. I have a fresh install of arch linux (just yesterday) and installed gnome and gnome-extra packages. As usual, I go with the procedure of editing my .xinitrc (exec ck-launch-session dbus-launch gnome-session), rc.conf (...dbus networkmanager...), inittab (runlvl 5, x:5......gdm). After a reboot, gdm screen appeared, I can't find my account, then there were two choices, "Sign in" and "Not listed..."). I clicked Not listed, then entered my user and password, after that, it responded: Authentication failure/failed... or something like that. I tried it again and it's the same. Temporarily, I'm using startx or slim (depends on my mood). Can anyone help me?
    here's my gdm's 0.log and 0-greeter.log respectively:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
    X.Org X Server 1.11.1.901 (1.11.2 RC 1)
    Release Date: 2011-10-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux espionage 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686
    Kernel command line: root=/dev/disk/by-uuid/9645b27b-41ee-461a-b4f0-f5ba1794542c ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 24 October 2011 12:26:09PM
    Current version of pixman: 0.22.2
    Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 19:43:23 2011
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:0:2:0) 8086:27a2:1025:012f rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:27a6:1025:012f rev 3, Mem @ 0xdc180000/524288
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (==) Matched intel as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.16.0
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.11.1, module version = 2.3.0
    (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 0.4.2
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    (II) VESA: driver for VESA chipsets: vesa
    (II) FBDEV: driver for framebuffer: fbdev
    (++) using VT number 7
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (WW) Falling back to old probe method for vesa
    (WW) Falling back to old probe method for fbdev
    (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 0.0.2
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (**) intel(0): Relaxed fencing disabled
    (**) intel(0): Wait on SwapBuffers? enabled
    (**) intel(0): Triple buffering? enabled
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): 3D buffers tiled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): EDID for output LVDS1
    (II) intel(0): Manufacturer: SEC Model: 4442 Serial#: 0
    (II) intel(0): Year: 2006 Week: 0
    (II) intel(0): EDID Version: 1.3
    (II) intel(0): Digital Display Input
    (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
    (II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
    (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LTN141W3-L01
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3424400000000
    (II) intel(0): 00100103801e13780a87f594574f8c27
    (II) intel(0): 27505400000001010101010101010101
    (II) intel(0): 010101010101ee1a0080502010300c40
    (II) intel(0): 33002fbe100000190000000f00000000
    (II) intel(0): 00000000002387026400000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c544e31343157332d4c30310a0064
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output LVDS1
    (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output TV1
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) intel(0): Kernel page flipping support detected, enabling
    (**) intel(0): Display dimensions: (300, 190) mm
    (**) intel(0): DPI set to (108, 106)
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (II) Unloading vesa
    (II) Unloading fbdev
    (II) Unloading fbdevhw
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i915
    (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (II) put_image
    (II) get_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i915
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.6.0
    (II) Using input driver 'evdev' for 'Power Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (--) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (--) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event2"
    (--) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
    (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event9"
    (--) A4TECH USB Device: Found 1 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found absolute axes
    (--) A4TECH USB Device: Found x and y absolute axes
    (--) A4TECH USB Device: Found keys
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Configuring as keyboard
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 9)
    (EE) A4TECH USB Device: failed to initialize for relative axes.
    (WW) A4TECH USB Device: found 37 axes, limiting to 36.
    (II) A4TECH USB Device: initialized for absolute axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event10)
    (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event10"
    (--) A4TECH USB Device: Found 20 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found x and y relative axes
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 10)
    (II) A4TECH USB Device: initialized for relative axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event11)
    (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Acer CrystalEye webcam: always reports core events
    (**) Acer CrystalEye webcam: Device: "/dev/input/event11"
    (--) Acer CrystalEye webcam: Found keys
    (II) Acer CrystalEye webcam: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.11.0, module version = 1.5.0
    (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
    (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver/identifier specified (ignoring)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Unloading synaptics
    (II) AT Translated Set 2 keyboard: Close
    (II) Unloading evdev
    (II) Acer CrystalEye webcam: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) Sleep Button: Close
    (II) Unloading evdev
    (II) Video Bus: Close
    (II) Unloading evdev
    (II) Power Button: Close
    (II) Unloading evdev
    Server terminated successfully (0). Closing log file.
    gnome-session[1036]: DEBUG(+): Enabling debugging
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/espionage:@/tmp/.ICE-unix/1036,unix/espionage:/tmp/.ICE-unix/1036
    gnome-session[1036]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: setting client store 0x9fe2638
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1036]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1036]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1036]: DEBUG(+): fill: *** Adding required components
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1036]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1036]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1036]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1036]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1036]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1046
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581614780600000010360002 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1118
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient 10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226648300000010360001 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1046
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10acccb988624d95d5131971581226572800000010360000
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1133
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: New client '0xa00d0c0 []'
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Initializing client 0xa00d0c0 []
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 []' received RegisterClient(10acccb988624d95d5131971581226572800000010360000)
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226572800000010360000 to session
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Set properties from client '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: ProcessID = '1133'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: connecting to address: unix:abstract=/tmp/gdm-greeter-bvcleLaw,guid=ee40278e3f4d9eb0fe19bee0000000f2
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling GetDisplayId
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Creating proxy for /org/gnome/DisplayManager/Display1
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    JS LOG: GNOME Shell started at Thu Oct 27 2011 19:43:43 GMT+0800 (PHT)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling BeginVerification
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=InfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received InfoQuery (gdm-password, Username:)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SelectedUserChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SelectedUserChanged (vic)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SecretInfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SecretInfoQuery (gdm-password, Password: )
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Problem
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Problem (gdm-password, Authentication failure)
    JS LOG: error: Authentication failure
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=ConversationStopped
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received ConversationStopped (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling Cancel
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x8062560
    gnome-session[1036]: DEBUG(+): Got callback for signal 15
    gnome-session[1036]: DEBUG(+): GsmManager: Logout called
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.7
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, 9, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, c, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]')
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011e48
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received CloseConnection
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa00d0c0
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000])
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011cc8
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1036]: DEBUG(+): Unreffing manager
    gnome-session[1036]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045408
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045480
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1046): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Last edited by vic (2011-10-27 13:51:21)

    wonder wrote:
    vic wrote:
    wonder wrote:what's your user id?
    when asked for uuid/uid?... I put 100. I thought any random number would do...
    look in /etc/pam.d/gdm-password
    in arch and in general >= 1000 are  normal users, < 1000 system users
    is that how it works? can i change it from 100 to 1000 or just make a new one?
    anyways i'll look to it.

  • [SOLVED] Wireless internet connection problem during installation

    Hi to everyone!
    I ask you a help in activating my wireless connection.
    I tried to install from the recent ISO (201208 - via CD)
    but I found some problems in activating a wireless connection in the first steps
    of the installation guide.
    My laptop is a Hp pavilion dv5 1020-el, with an Intel wireless 5100AGN internal interface.
    So I did:
    1) iwconfig to see my devices and the system detects my wlan0.
    2) followed the Wireless_Setup page from wiki to set it
    3) used wpa_supplicant and passphrase to set my ESSID name and wpa key.
    4) iwconfig then showed wlan0 associated with my ESSID, with Power ON and Encryption OFF.
    I could not try a connection via ping command.
    Even wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf did not work.
    Maybe the problem is with Encryption OFF.
    Thanks for your attention!
    EDIT:
    I solved this way,connecting to an open wireless open  network:
    1.(from boot) I created a profile in /etc/network.d/ from /etc/network.d/examples
    2. started a # netcfg 'my_ESSID'
    3. # ping -c 3 www.google.com
    All is ok! I can install Arch Linux from my smartphone as a router.
    But I couldn't connect to a WPA protected wireless network yet.
    Last edited by spinaluc (2012-08-18 13:08:15)

    Thanks to everyone who responded to my question. The company who provides the wireless internet service to my apartment complex moved the antenna next to my unit and claims he boosted the power. As the saying goes, "The squeaky wheel gets the grease". I complained almost daily to the apartment manager and she, in turn, griped to the provider which eventually led to the "solution" above. Using Skype is still shaky as the person I'm calling isn't always able to make out what I am saying. So, I use Skype only when I REALLY need to make a phone call. Even though none of your suggestions solved my problem, I am still very, very grateful to all of you who tried. Thank you very, very much! -- Matt

  • Just installed a new Airport Exteme.  Set up was no problem however we have  3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

    Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

    Well, this is interesting,
    Let me tell you coulpe of things I noticed:
    - Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
    - in some AP configurations (AP1 for example) I can see that:
    wlccp authentication-server client any method_Users
    This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
    aaa authentication login method_Users group Users
    This shows us that the method method_Users uses the server group named Users.
    let us see what is configured withe the group Users:
    aaa group server radius Users
    NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
    so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
    Check and let me know if that works.
    Regards,
    Amjad

Maybe you are looking for