[SOLVED] Just installed KDE 4.6, desktop effects don't work.

When I try to enable KDE's desktop effects the screen goes haywire and everything is black with nasty distorted lines. Then everything returns after a little while and KDE shows a popup notification saying that "desktop effects were too slow and have been suspended...".
I'm pretty sure my xorg.conf is configured perfectly, I've read everything there is to know about that. I was previously on Gnome with Compiz working flawlessly, so I have a feeling its not a video problem. There's always a small chance I could be wrong though.
Could it be a video driver problem? If so, what should I do about that?
Any idea what might be wrong?
Last edited by amadar (2011-04-24 23:25:03)

I'm using xf86-video-ati with my ATI card.
I initially tried Gnome, but for some reason, gnome-shell just wouldn't start, so that why I ended up trying KDE. Once in KDE, i had this described problem.I couldn't fix it, and it was crashing (100% CPU usage sometimes), so I switched back to Gnome 3 to attempt to get the shell running. Finally, I figured out that you must not add "nomodeset" to the kernel boot line in order for gnome-shell to work, so I removed that from the end of my line and gnome-shell worked!
It might be possible that this is the solution for the KDE graphic problem as well... I'm testing it right now, i'll be back to post it after the restart...
Last edited by amadar (2011-04-24 23:03:03)

Similar Messages

  • Just installed OSX update and now widgets don't work

    I click on my dashboard and my widget icons all show up as black squares with a @, a music note, a cloud, and a clock. I click on them and nothing happens. How can I fix that?

    I found just one of my Widgets malfunctioning (BBCWeather Widget) and contacted the author (correct term?) yesterday. He replied this morning with a link to an updated version!
    That is one option for non-Apple widgets, but if you have many widgets misfiring, it's a tall order. And if it's the widgets that come with Tiger, then maybe try downloading and installing the appropriate 10.4.7 Combo Update from this page.
    Repair permissions before and after the update.
    iMac G4 15"/800MHz/1GB ram   Mac OS X (10.4.6)   PowerBook G4 17"/1.33 MHz/1GB ram

  • [Solved] KDE Desktop Effects no longer working

    Hello,
    I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
    I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
    "For technical reasons it is not possible to determine all possible error causes.
    Desktop effect system is not running."
    For the record, I am on a Thinkpad X201 with intel graphics.
    Any ideas?
    Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)

    Some Extra information:
    I just tried a restart, that didn't work.
    I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
    Application: KWin (kwin), signal: Aborted
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    To enable execution of this file add
    add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
    line to your configuration file "/home/perry/.gdbinit".
    To completely disable this security protection add
    set auto-load safe-path /
    line to your configuration file "/home/perry/.gdbinit".
    For more information about this security protection see the
    "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
    info "(gdb)Auto-loading safe path"
    [Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
    Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
    #0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
    #1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
    [KCrash Handler]
    #5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
    #6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
    #7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
    #8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
    #9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
    #10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
    #11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
    #12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
    #13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
    #14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
    #15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
    #20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
    #21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
    #24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
    #27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
    #28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
    #31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
    #32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
    #33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
    #34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
    #37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
    #38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
    #39 0x00000000004006fe in _start ()

  • [SOLVED] just installed gnome, recommended wireless internet..

    I just installed gnome and I have my b43 broadcom working (through terminal configuration).  How do I go about installing an applet on my panel to select wireless networks? (yes, similar to ubuntu..)
    Last edited by playdafunkimuzic (2008-12-30 19:29:19)

    I use WPA and the Wicd only connect with Preshared Key and with Passphrase doesn't work I don't know why.
    A sugestion: Use WPA instead, because WEP is very simple to break with simple tools:
    kismet: to detect your wireless network
    aircrack-ng: to crack your WEP protection
    wireshark: to sniff your packages
    Last edited by alessandro_ufms (2008-12-31 15:25:26)

  • Just installed Yosemite (MacPro15 End 2011), the fan is working on high speed since! any solutions?

    I just installed Yosemite (MacPro15 End 2011), the fan is working on high speed since!
    Is there anything I can do? On Maverick the mac worked just fine and very silently, so I assume that the new system does something wrong?
    Can anybody offer some help?

    Hello Csound1
    here is the report
    roblembeschreibung:
    Update auf Yosemite, Lüfter läuft mit max frequenz, CPU Temperatur ca. 95 °c
    EtreCheck version: 2.0.6 (91)
    Bericht vom 20. Oktober 2014 16:56:47 MESZ
    Hardware-Informationen: ℹ️
      MacBook Pro (15 Zoll, Ende 2011) (Verifiziert)
      MacBook Pro - Modell: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Nachrüstbar
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1333 MHz ok
      Bluetooth: Älter - Handoff/Airdrop2 nicht unterstützt
      Wireless:  en1: 802.11 a/b/g/n
    Video Informationen: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 512 MB
    System-Software: ℹ️
      OS X 10.10 (14A389) - Laufzeit: 0:4:24
    Festplatteninformationen: ℹ️
      Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verifiziert
      EFI (disk0s1) <nicht sichtbar>  : 210 MB
      Recovery HD (disk0s3) <nicht sichtbar>  [Erholung] : 650 MB
      Macintosh HD (disk1) /  [Startup] : 498.88 GB (94.91 GB frei)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB-Informationen: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Brother MFC-6490CW
      Apple Computer, Inc. IR Receiver
    Thunderbolt Informationen: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store und verifizierte Entwickler
    Kernel-Erweiterungen: ℹ️
      /Applications/Kies.app
      [nicht geladen] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Unterstützt
      [nicht geladen] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Unterstützt
      /Applications/Magican.app
      [nicht geladen] com.magican.iokit.filemon (1 - SDK 10.7) Unterstützt
      [nicht geladen] com.magican.iokit.netmon (1 - SDK 10.7) Unterstützt
      /Applications/Parallels Desktop.app
      [nicht geladen] com.parallels.kext.hypervisor (10.1.0 28600 - SDK 10.7) Unterstützt
      [nicht geladen] com.parallels.kext.netbridge (10.1.0 28600 - SDK 10.7) Unterstützt
      [nicht geladen] com.parallels.kext.usbconnect (10.1.0 28600 - SDK 10.7) Unterstützt
      [nicht geladen] com.parallels.kext.vnic (10.1.0 28600 - SDK 10.7) Unterstützt
      /Library/Application Support/Avast/components/fileshield/unsigned
      [geladen] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Unterstützt
      /Library/Application Support/Avast/components/proxy/unsigned
      [geladen] com.avast.PacketForwarder (1.4 - SDK 10.9) Unterstützt
      /System/Library/Extensions
      [geladen] com.Cycling74.driver.Soundflower (1.6.5 - SDK 10.6) Unterstützt
      [geladen] com.delantis.kext.tcpblocknke (2.2.6 - SDK 10.6) Unterstützt
      [nicht geladen] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Unterstützt
      [nicht geladen] com.elgato.driver.DontMatchAfaTech (1.1) Unterstützt
      [nicht geladen] com.elgato.driver.DontMatchCinergy450 (1.1) Unterstützt
      [nicht geladen] com.elgato.driver.DontMatchCinergyXS (1.1) Unterstützt
      [nicht geladen] com.elgato.driver.DontMatchEmpia (1.1) Unterstützt
      [nicht geladen] com.elgato.driver.DontMatchVoyager (1.1) Unterstützt
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [nicht geladen] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Unterstützt
      [nicht geladen] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Unterstützt
    Start-Agents: ℹ️
      [geladen] com.avast.userinit.plist Unterstützt
      [geladen] com.oracle.java.Java-Updater.plist Unterstützt
      [ungültig?] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Unterstützt
      [ungültig?] com.parallels.mobile.startgui.launchagent.plist Unterstützt
    Start-Daemons: ℹ️
      [geladen] com.adobe.fpsaud.plist Unterstützt
      [ungültig?] com.adobe.SwitchBoard.plist Unterstützt
      [geladen] com.avast.init.plist Unterstützt
      [geladen] com.avast.uninstall.plist Unterstützt
      [geladen] com.avast.update.plist Unterstützt
      [ungültig?] com.delantis.tcbblocknke_load_kext.plist Unterstützt
      [geladen] com.delantis.TCPBlock.plist Unterstützt
      [läuft] com.magican.castle.plist Unterstützt
      [geladen] com.microsoft.office.licensing.helper.plist Unterstützt
      [geladen] com.oracle.java.Helper-Tool.plist Unterstützt
      [geladen] com.oracle.java.JavaUpdateHelper.plist Unterstützt
      [ungültig?] com.parallels.mobile.dispatcher.launchdaemon.plist Unterstützt
      [gescheitert] com.parallels.mobile.kextloader.launchdaemon.plist Unterstützt
    Benutzer Start-Agents: ℹ️
      [geladen] com.adobe.AAM.Updater-1.0.plist Unterstützt
      [geladen] com.adobe.ARM.[...].plist Unterstützt
      [ungültig?] com.avast.home.userinit.plist Unterstützt
      [ungültig?] com.delantis.tcpblock.plist Unterstützt
      [geladen] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Unterstützt
    Anmeldeobjekte: ℹ️
      GrowlHelperApp ProgrammVerdeckt (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      EyeTV Helper Programm (/Library/Application Support/EyeTV/EyeTV Helper.app)
      KiesAgent ProgrammVerdeckt (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
      fuspredownloader ProgrammVerdeckt (/Users/[redigiert]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-Ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Unterstützt
      EPPEX Plugin: Version: 4.1.0.0 Unterstützt
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe empfiehlt 15.0.0.189
      AdobePDFViewer: Version: 9.5.5 Unterstützt
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Unterstützt
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Unterstützt
      JavaAppletPlugin: Version: Java 7 Update 72 Version prüfen
    Internet Plug-Ins des Benutzers: ℹ️
      WebEx64: Version: 1.0 - SDK 10.5 Unterstützt
    Safari Extensions: ℹ️
      OpenIE
      wrc
      StartPage HTTPS
      Ghostery
      ClickToFlash
      YouTube5
      AdBlock
      My eBay Manager
    Einstellungskarten von Drittanbietern: ℹ️
      Flash Player  Unterstützt
      FUSE for OS X (OSXFUSE)  Unterstützt
      Growl  Unterstützt
      Java  Unterstützt
      MacFUSE  Unterstützt
      NTFS-3G  Unterstützt
      Perian  Unterstützt
      TCPBlock  Unterstützt
    Time Machine: ℹ️
      Überspringen Systemdateien: NEIN
      Mobil Sicherungskopie: AUF
      Aautomatisches-Sicherungskopie: JA
      Sicherungsziele:
      \TimeMachine\ [Network]
      Gesamt Größe: 2 TB
      Gesamtzahl der Sicherungskopie: 27
      Älteste Sicherungskopie: 2014-09-19 12:44:24 +0000
      Letzten Sicherung: 2014-10-20 13:39:04 +0000
      Größe der Sicherungsplatte: Hervorragend
      Größe der Sicherungsplatte 2 TB > (Disk Größe 0 B X 3)
    Top Prozesse von der CPU: ℹ️
          78% launchd
          23% opendirectoryd
          17% mds
          13% syslogd
          12% notifyd
    Top Prozesse vom Speicher: ℹ️
      120 MB mds_stores
      120 MB com.apple.WebKit.WebContent
      120 MB com.avast.daemon
      120 MB Mail
      86 MB ocspd
    Informationen zum virtuellen Speicher: ℹ️
      11.67 GB Freier RAM
      2.48 GB Aktive RAM
      1.42 GB Inaktive RAM
      1.60 GB Wired RAM
      2.06 GB Seite-ins
      0 B Seite-outs

  • KDE4 desktop effects no longer work

    I did a pacman -Syu today in order to catch up on out of date packages and KDE4 desktop effects have stopped working. I have tried correcting this by doing nvidia-xconfig and nvidia-xconfig --composite as root to no avail. Any ideas what may have gone wrong?

    Saw another post that might be the same issue here and on the chakra forums. From what I can tell it doesn't seem like there's much of resolution yet though.

  • Desktop themes don't work in Windows 7

    Just loaded Windows 7 under Bootcamp. Desktop themes don't work. The choices offered in the Control Panel just don't take when I click on them. I'm stuck with a plain black desktop. What gives? Graphics seem ok but maybe I'm missing something.

    Hi lida80,
    Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I will be happy to help you with getting your function keys working for you. You mentioned they don't work in Windows 7 Ultimate, have they worked with other operating systems? If so which ones. What is your product number?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • P755 and Realtek HD Audio Manager sound effects don't work

    Hi. I have a P755 and the Realtek HD Audio Manager sound effects don't work. Everything seems to be up to date, but the equalizer and environment features have never worked. I am using the Analog stereo out. The Speaker Configuration is Stereo. The only thing that seems to change the audio characteristics is switching from Headphone to Line Out.
    Solved!
    Go to Solution.

    Satellite P755-S5390
    Can't hurt to reinstall the drivers.
       Realtek Audio Driver
       nVidia HD Audio Driver
    -Jerry

  • Effects Don't work with Ray-Traced 3D?

    Hello,
    I'm working on a 3D logo for a company, and I'm trying to snaz what I have done with some effects, but the effects don't work. For example, I tried adding the CC Light Wipe Effect, but it will only show up when I switch back to the classic 3D renderer. Google searches aren't exaclty effective when I my serach quiere has "Effects" and After Effects" in it, so I'm forced to come here looking for the answer.
    Are effects supported in this new renderer? If so, how do I get them to work?
    Thanks

    Pre-composing and then switching off Ray-traced rendering in the main comp gives you the ability to apply effects to the pre-comp. This may or may not work for your situation.
    Another option is to pre-render your Ray-traced work and then apply effects to the footage. There's almost always something you can do if you think about it for a while.
    Still another option is to put a 2D adjustment layer above your 3D Ray-traced layer and apply the effect there.

  • E52 Theme Effects Don't Work

    Hello Friends
    My E52 Theme Effects Don't Work Correctly.
    when i Press ON for theme effects, mobile speed get low and effects don't work
    please help me

    Pre-composing and then switching off Ray-traced rendering in the main comp gives you the ability to apply effects to the pre-comp. This may or may not work for your situation.
    Another option is to pre-render your Ray-traced work and then apply effects to the footage. There's almost always something you can do if you think about it for a while.
    Still another option is to put a 2D adjustment layer above your 3D Ray-traced layer and apply the effect there.

  • [Solved] Fresh install, KDE input responses studdering

    Hi,
    I've been searching the Wiki and forums here for about 30 minutes and cant find anything that covers what's going on. I'm not sure whether to look at my VM that I'm running Arch through, or at my config of Arch itself.
    I installed Arch with a KDE desktop and everything installed and booted fine. I have my VM open and I can see the desktop just fine. Mouse performance (of which I pacman'd xf86-input-mouse) since it's just a Dell touchpad on my Vostro. When I try to type in the Konsole, I will randomly get multiple key presses (again, just installed basic keyboard input) as if its all of the sudden getting multiple inputs from that keystroke. The mouse, also is very studdery and will halt every 1/4 of a second or so.... not nearly gliding across the screen as it should.
    My laptop has one of those Intel GMA 4500 HD mobile video cards in it. I pacman'd the xf86-intel-video package and then installed KMS (I think it was)... either way, followed the wiki on that and still have no change in performance. I'd like to find out where to start looking.
    My laptop is pretty beefy. Its a Core Duo 2 running at 2.2Ghz on 3Gb of RAM. I allocated 100Gb of disk space in a VM and 1Gb of memory to Arch. Suggestions?
    Last edited by Davedough (2010-05-27 15:30:51)

    Wow... thanks for the overwhelming response. All of these suggestions really helped me figure it out on my own.

  • [SOLVED] Cannot install KDE with python-numpy pre-installed?

    Hi, all
    I am with xfce currently and though of tring KDE. However when I  tried to install KDE it turns that there are confilicts between 'kde' and 'python-numpy':
    :: Proceed with installation? [Y/n]
    (318/318) checking keys in keyring [####################################] 100%
    (318/318) checking package integrity [####################################] 100%
    (318/318) loading package files [####################################] 100%
    (318/318) checking for file conflicts [####################################] 100%
    error: failed to commit transaction (conflicting files)
    python2-numpy: /usr/bin/f2py2 exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy-1.8.0-py2.7.egg-info exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__config__.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__config__.pyc exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__init__.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__init__.pyc exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/_import_tools.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/_import_tools.pyc exists in filesystem
    Can anyone help please?
    thanks,
    ps:
    python-numpy was installed via "pip install numpy" instead of "pacman -S python-numpy". Could this cause any problem?
    Last edited by hellolj (2014-03-02 06:15:30)

    circleface wrote:
    hellolj wrote:By that, does it mean I should always stick to using "pacman" instead of "pip install"?
    Generally it is less pain to stick to pacman only.  Using anything else would mean pacman cannot know what packages certain files belong to, similar to what you ran into here.
    Got it. Seems I have to reinstall my python packages from scratches again.
    Thanks to all the help.
    SOLVED.

  • [Solved]Kwin doesn't restore Suspend desktop effects for full screen

    Hi! I am using latest Kwin with Plasma 5 on my Arch and I have noticed that I have to check "Suspend desktop effects for full screen windows" in Desktop Effects>Advanced every time I log in.
    What's wrong with Kwin?
    Solved: Kwin 5.2 is under development now so currently this functionality is not availible.
    Last edited by artem.jackson (2015-02-19 00:41:43)

    It saves the state for my NVIDIA blob but does not for Intel laptop. It also warns that not every setup is able to redirect, so maybe he thinks our cards are unsupported and unchecks it?

  • Intel video + desktop effects used to work... now it doesn't.

    I'm using kde-mod and I'm not sure what happened, but in the last week or two, desktop effects (compositing) has stopped working, and when I drag windows around, there are artifacts and such now.  It didn't used to be this way and worked quite well before.  I'm using the intel video driver... the card is a fairly recent gmasomethingorother.  I really have no idea what to do next. 
    Here's xorg.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux zeeARCH 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
    Build Date: 28 May 2009 10:40:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 30 16:12:04 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (==) No device specified for screen "Screen0".
    Using the first device section listed.
    (**) | |-->Device "name"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "DontZap" "false"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4200000/1048576
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.7.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "true"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xF4400000
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (==) intel(0): Using EXA for acceleration
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Resizable framebuffer: not available (1 3)
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using user preference for initial modes
    (II) intel(0): Output LVDS using initial mode 1680x1050
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 32764 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3400bd00 to 0x6603ed00
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Loading sub module "dri2"
    (II) LoadModule: "dri2"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 735744 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 2942972 kB available
    (WW) intel(0): DRI2 requires UXA
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xf4400000
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 36126720 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000
    (II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000
    (II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: XF86DRI Enabled
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) ThinkPad Extra Buttons: always reports core events
    (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
    (II) ThinkPad Extra Buttons: Found keys
    (II) ThinkPad Extra Buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) Option "Emulate3Buttons" "true"
    (II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
    (**) Option "EmulateWheel" "true"
    (**) Option "EmulateWheelButton" "2"
    (**) Option "EmulateWheelTimeout" "200"
    (**) Option "YAxisMapping" "4 5"
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) Option "XAxisMapping" "6 7"
    (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz)
    (II) intel(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz)
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0x2a804000
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    Here is xorg.conf  (I know it's shit :-)  ) 
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    Option "AIGLX" "true"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "name"
    Driver "intel"
    Option "XAANoOffscreenPixmaps" "true"
    Option "DRI" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    Section "ServerFlags"
    Option "DontZap" "false"
    EndSection

    Ok I finally figured it out, well sort of. The issue was that the Netgear was screwing up the DHCP. I new it had to be the the Netgear because the setup worked fine at a friends with a Linksys. The strange thing was that iTunes could see other libraries but not connect even though a ping could not. So I turned off the DHCP server and assigned manual IP's to all the clients. Didn't work, I could see the other clients and share files but the internet was lost. Weird. Next I turned DHCP back on and reset the entire network back to my original configuration. Works like a charm. I don't really know what the issue is and the solution doesn't stick, but it can be replicated without fail. Thanks to everyone.

  • I just installed MS Office 2013 but I don't find where the programs are.

    I just installed MS Office 2013, when I try to access Excell or Word, I don't find them in my system.  In the past, as soon as you install MS Office, each program (Excel, Word, Power Point) shows in the desktop.
    This question was solved.
    View Solution.

    gavega
    Welcome to the HP Community Forum.
    You can try searching your Start Screen / Apps
    This might help:
    Search Start Screen for Installed Application
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • Can not start DAC server

    Hi , I am getting following error while trying to start the DAC server . May 3, 2011 11:10:19 PM com.siebel.etl.bootup.DAWUtils checkPermission SEVERE: Checking the localhost with the values defined in the DAC repository! May 3, 2011 11:10:19 PM com.

  • How do i create a single instance of a class inside a servlet ?

    how do i create a single instance of a class inside a servlet ? public void doGet(HttpServletRequest request,HttpServletResponseresponse) throws ServletException, IOException { // call a class here. this class should create only single instance, //th

  • How to  create a datasource from a pool table ?

    Hi guys, Is there anyone who faced the same problem. I need to create an datasource from the table TIV5T to get texts in BW . This table is a pool table . When i want to create the DS in RSO2 i got the message : Only transparent tables and database v

  • Does user hook still exist on 12i?

    Hi, We are in the process from upgrading from 11i to 12i? I would like to know if user hook still exist on 12i for HR? Also Is there a better solution than using user hook that could be used on 12i for HR? Thanks..Lyne Edited by: user12263692 on 2011

  • How to transfer playlists from Windows XP to IMAC 10.5

    I followed the directions on the apple support-the music all moved, but my playlists were missing- Anyone have any ideas on this? I'm moving music from windows XP to an Imac with OS 10.5.3 Thanks