[SOLVED] KDE Is not loading
HI, i'm been an archlinux user for a while, never have great issues, but now i reinstalled arch in a formated disk and started all over. The thing is that I installed kde basis (following the wiki), but neither kdm via inittab, or kdm via daemon works! it just load the tt1 console and do nothing. No erors, or something. The only difference with previous installation is that the first time i installed kde-meta package, and have no issues
Any thoughts?
Last edited by atercor (2012-05-20 01:26:48)
Anything in the logs? What happens if you try to start KDE with startx/.xinitrc instead of KDM?
Similar Messages
-
Hello everyone.
After reboot KDE won't loading anymore (after KDM login, stuck for ~30 sec at last stage and then appears only cursor).
Here the my xerrors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(1074) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kded(1073)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kded(1073) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kwin(1106) KDecorationPlugins::canLoad: "****** The library /usr/lib/kde4/kwin3_deKorator.so has no API version ******"
kwin(1106) KDecorationPlugins::canLoad: ****** Please use the KWIN_DECORATION macro in extern "C" to get this decoration loaded in future versions of kwin
kwin(1106): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore4" - conversion of "0,0,0,0" to QRect failed"
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kdm.log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
klauncher(2730) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2724)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2724)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Xorg.0.log
[ 800.377]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 800.377] X Protocol Version 11, Revision 0
[ 800.377] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 800.377] Current Operating System: Linux Spotlight 3.12.4-pf #1 SMP PREEMPT Wed Feb 19 23:20:59 EET 2014 x86_64
[ 800.377] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-pf root=UUID=8b2512bb-5fc1-47b9-a43d-e7b3d76bf8de rw quiet apparmor=1 security=apparmor scsi_mod.scan=sync
[ 800.377] Build Date: 09 January 2014 08:47:24AM
[ 800.377]
[ 800.377] Current version of pixman: 0.32.4
[ 800.377] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 800.377] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 800.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24 18:23:57 2014
[ 800.377] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 800.377] (==) No Layout section. Using the first Screen section.
[ 800.377] (==) No screen section available. Using defaults.
[ 800.377] (**) |-->Screen "Default Screen Section" (0)
[ 800.377] (**) | |-->Monitor "<default monitor>"
[ 800.377] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 800.377] (**) | |-->Device "Nvidia Card"
[ 800.377] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 800.377] (==) Automatically adding devices
[ 800.377] (==) Automatically enabling devices
[ 800.377] (==) Automatically adding GPU devices
[ 800.377] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 800.377] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 800.377] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 800.377] (II) Loader magic: 0x804c80
[ 800.377] (II) Module ABI versions:
[ 800.377] X.Org ANSI C Emulation: 0.4
[ 800.377] X.Org Video Driver: 15.0
[ 800.377] X.Org XInput driver : 20.0
[ 800.377] X.Org Server Extension : 8.0
[ 800.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 800.378] (--) PCI:*(0:1:0:0) 10de:0615:0000:0000 rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 800.378] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 800.378] Initializing built-in extension Generic Event Extension
[ 800.378] Initializing built-in extension SHAPE
[ 800.378] Initializing built-in extension MIT-SHM
[ 800.378] Initializing built-in extension XInputExtension
[ 800.378] Initializing built-in extension XTEST
[ 800.378] Initializing built-in extension BIG-REQUESTS
[ 800.378] Initializing built-in extension SYNC
[ 800.378] Initializing built-in extension XKEYBOARD
[ 800.378] Initializing built-in extension XC-MISC
[ 800.378] Initializing built-in extension SECURITY
[ 800.378] Initializing built-in extension XINERAMA
[ 800.378] Initializing built-in extension XFIXES
[ 800.378] Initializing built-in extension RENDER
[ 800.378] Initializing built-in extension RANDR
[ 800.378] Initializing built-in extension COMPOSITE
[ 800.378] Initializing built-in extension DAMAGE
[ 800.378] Initializing built-in extension MIT-SCREEN-SAVER
[ 800.378] Initializing built-in extension DOUBLE-BUFFER
[ 800.378] Initializing built-in extension RECORD
[ 800.378] Initializing built-in extension DPMS
[ 800.378] Initializing built-in extension Present
[ 800.378] Initializing built-in extension DRI3
[ 800.378] Initializing built-in extension X-Resource
[ 800.378] Initializing built-in extension XVideo
[ 800.378] Initializing built-in extension XVideo-MotionCompensation
[ 800.378] Initializing built-in extension XFree86-VidModeExtension
[ 800.378] Initializing built-in extension XFree86-DGA
[ 800.378] Initializing built-in extension XFree86-DRI
[ 800.378] Initializing built-in extension DRI2
[ 800.378] (II) LoadModule: "glx"
[ 800.378] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 800.385] (II) Module glx: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Server Extension
[ 800.385] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 800.385] Loading extension GLX
[ 800.385] (II) LoadModule: "nvidia"
[ 800.385] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 800.385] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Video Driver
[ 800.385] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 800.385] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 800.385] (++) using VT number 7
[ 800.386] (II) Loading sub module "fb"
[ 800.386] (II) LoadModule: "fb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 800.387] (II) Module fb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 800.387] (II) Loading sub module "wfb"
[ 800.387] (II) LoadModule: "wfb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 800.387] (II) Module wfb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (II) Loading sub module "ramdac"
[ 800.387] (II) LoadModule: "ramdac"
[ 800.387] (II) Module "ramdac" already built-in
[ 800.387] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 800.387] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 800.387] (==) NVIDIA(0): RGB weight 888
[ 800.387] (==) NVIDIA(0): Default visual is TrueColor
[ 800.387] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 800.387] (**) NVIDIA(0): Option "NoLogo" "true"
[ 800.387] (**) NVIDIA(0): Option "TripleBuffer" "true"
[ 800.387] (**) NVIDIA(0): Enabling 2D acceleration
[ 800.821] (II) NVIDIA(0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 800.821] (II) NVIDIA(0): stereo.
[ 800.821] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 800.822] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 800.822] (--) NVIDIA(0): Memory: 524288 kBytes
[ 800.822] (--) NVIDIA(0): VideoBIOS: 62.92.9a.00.00
[ 800.822] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 800.826] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 800.826] (--) NVIDIA(0): CRT-0
[ 800.826] (--) NVIDIA(0): CRT-1
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0) (boot, connected)
[ 800.826] (--) NVIDIA(0): DFP-1
[ 800.826] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): Internal Dual Link TMDS
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): 330.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 800.826] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 800.826] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 800.826] (**) NVIDIA(0): device BenQ GL940 (DFP-0) (Using EDID frequencies has been
[ 800.826] (**) NVIDIA(0): enabled on all display devices.)
[ 800.827] (==) NVIDIA(0):
[ 800.827] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 800.827] (==) NVIDIA(0): will be used as the requested mode.
[ 800.827] (==) NVIDIA(0):
[ 800.827] (II) NVIDIA(0): Validated MetaModes:
[ 800.827] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 800.827] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 800.859] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 800.859] (--) NVIDIA(0): option
[ 800.859] (--) Depth 24 pixmap format is 32 bpp
[ 800.859] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 800.861] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 800.861] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 800.861] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 800.861] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 800.861] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 800.861] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 800.861] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 800.861] (II) NVIDIA(0): Config Options in the README.
[ 800.866] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 800.893] Loading extension NV-GLX
[ 800.905] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 800.905] (==) NVIDIA(0): Backing store enabled
[ 800.905] (==) NVIDIA(0): Silken mouse enabled
[ 800.906] (==) NVIDIA(0): DPMS enabled
[ 800.906] Loading extension NV-CONTROL
[ 800.906] Loading extension XINERAMA
[ 800.906] (II) Loading sub module "dri2"
[ 800.906] (II) LoadModule: "dri2"
[ 800.906] (II) Module "dri2" already built-in
[ 800.906] (II) NVIDIA(0): [DRI2] Setup complete
[ 800.906] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 800.906] (--) RandR disabled
[ 800.909] (II) Initializing extension GLX
[ 800.933] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 800.933] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.933] (II) LoadModule: "evdev"
[ 800.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 800.933] (II) Module evdev: vendor="X.Org Foundation"
[ 800.933] compiled for 1.15.0, module version = 2.8.2
[ 800.933] Module class: X.Org XInput Driver
[ 800.933] ABI class: X.Org XInput driver, version 20.0
[ 800.933] (II) Using input driver 'evdev' for 'Power Button'
[ 800.933] (**) Power Button: always reports core events
[ 800.933] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 800.933] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.933] (--) evdev: Power Button: Found keys
[ 800.933] (II) evdev: Power Button: Configuring as keyboard
[ 800.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 800.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 800.933] (**) Option "xkb_rules" "evdev"
[ 800.933] (**) Option "xkb_model" "pc104"
[ 800.933] (**) Option "xkb_layout" "us"
[ 800.943] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 800.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.943] (II) Using input driver 'evdev' for 'Power Button'
[ 800.943] (**) Power Button: always reports core events
[ 800.943] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 800.943] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.943] (--) evdev: Power Button: Found keys
[ 800.943] (II) evdev: Power Button: Configuring as keyboard
[ 800.943] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 800.943] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 800.943] (**) Option "xkb_rules" "evdev"
[ 800.943] (**) Option "xkb_model" "pc104"
[ 800.943] (**) Option "xkb_layout" "us"
[ 800.944] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event13)
[ 800.944] (**) SONiX USB Device: Applying InputClass "evdev pointer catchall"
[ 800.944] (II) Using input driver 'evdev' for 'SONiX USB Device'
[ 800.944] (**) SONiX USB Device: always reports core events
[ 800.944] (**) evdev: SONiX USB Device: Device: "/dev/input/event13"
[ 800.944] (--) evdev: SONiX USB Device: Vendor 0xc45 Product 0x7711
[ 800.944] (--) evdev: SONiX USB Device: Found 9 mouse buttons
[ 800.944] (--) evdev: SONiX USB Device: Found scroll wheel(s)
[ 800.944] (--) evdev: SONiX USB Device: Found relative axes
[ 800.944] (--) evdev: SONiX USB Device: Found x and y relative axes
[ 800.944] (II) evdev: SONiX USB Device: Configuring as mouse
[ 800.944] (II) evdev: SONiX USB Device: Adding scrollwheel support
[ 800.944] (**) evdev: SONiX USB Device: YAxisMapping: buttons 4 and 5
[ 800.944] (**) evdev: SONiX USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 800.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/input/input13/event13"
[ 800.944] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE, id 8)
[ 800.944] (II) evdev: SONiX USB Device: initialized for relative axes.
[ 800.944] (**) SONiX USB Device: (accel) keeping acceleration scheme 1
[ 800.944] (**) SONiX USB Device: (accel) acceleration profile 0
[ 800.944] (**) SONiX USB Device: (accel) acceleration factor: 2.000
[ 800.944] (**) SONiX USB Device: (accel) acceleration threshold: 4
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse0)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event7)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event6)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event5)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 800.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 800.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 800.945] (**) AT Translated Set 2 keyboard: always reports core events
[ 800.945] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 800.945] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 800.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 800.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 800.945] (**) Option "xkb_rules" "evdev"
[ 800.945] (**) Option "xkb_model" "pc104"
[ 800.945] (**) Option "xkb_layout" "us"
[ 800.945] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 805.999] (II) NVIDIA(GPU-0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 805.999] (II) NVIDIA(GPU-0): stereo.
Running latest NVIDIA drivers (GTS 250).
Last edited by Swiftie (2014-02-24 17:28:19)I discovered problem. It's caused by NetworkManager after last update (libsystemd.0.so trouble).
Recompile pkg by yourself to get working NetworkManager.
Last edited by Swiftie (2014-02-24 17:28:01) -
This problem is present since about the release of 4.11 of KDE. Howerver usually 1 reboot is enough, and everything works fine again.
But today i had to restart my system 5x till finally everything is working fine.
The Problem: KDE loads only the network-applet on the systray (kmix and clipper are not visible) and it takes around 10 seconds till i can launch the kickoff-menu. After that i get a warning about my one autostart-programm, which is obviously running, and if i really want to try to run in twice. (Btw, if i choose no, then it is not loaded, which is kind of strange too). I am not able to use the reboot/shutdown option in the kickoff-menu. Dolphin or other apps seems to load fine. Only solution for me so far is to reboot the system.
Here is the output of .xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(565) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
ModemManagerQt "kded" ( 564 ) void ModemManager::ModemManagerPrivate::init() : Error getting device list: "org.freedesktop.DBus.Error.ServiceUnknown" : "The name org.freedesktop.ModemManager was not provided by any .service files"
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.8'
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
kded(564)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kded(564) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 325.15
GPU class: GF100
OpenGL version: 4.3
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.6
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
========================> 4 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(631)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f2
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f2
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f2
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f4
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f4
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f4
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f6
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f6
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f6
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f8
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f8
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fa
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fa
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fa
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fc
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fc
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fc
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
plasma-desktop(631) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
N: [pulseaudio] main.c: User-configured server at {1da04571ceeb43369c6b10f2742a25c9}unix:/run/user/1000/pulse/native, which appears to be local. Probing deeper.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl")
ksmserver(613): Couldn't start knotify from knotify4.desktop: "Fehler bei der Ausführung von „knotify4.desktop“. Entweder läuft KLauncher nicht mehr, oder die Anwendung kann nicht gestartet werden."
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
New PolkitAgentListener 0x1200220
Adding new listener PolkitQt1::Agent::Listener(0x145d2e0) for 0x1200220
yakuake(666)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
yakuake(666)/konsole Konsole::Session::run: Attempted to re-run an already running session.
krunner(659)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/tumas/.kde4/share/apps/kabc"
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
akonadi_nepomuk_feeder(711) FeederPluginloader::feederPluginsForMimeType: No feeder for type "text/calendar" found
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
dolphin(802) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
dolphin(802)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kwin(623) KWin::GlxBackend::present:
It seems you are using the nvidia driver without triple buffering
You must export __GL_YIELD="USLEEP" to prevent large CPU overhead on synced swaps
Preferably, enable the TripleBuffer Option in the xorg.conf Device
For this reason, the tearing prevention has been disabled.
See https://bugs.kde.org/show_bug.cgi?id=322060
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kate(814)/kate-filetree KateFileTreePluginView::KateFileTreePluginView: BEGIN: mw: Kate::MainWindow(0x1da8200)
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2146e90,0x0,-1,QObject(0x0) ,"m_root")
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2147550,0x0,-1,QObject(0x0) ,"Unbenannt")
kate(814)/kate-filetree KateFileTreeModel::documentOpened: before add: ProxyItem(0x2147550,0x0,-1,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: empty item
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" ) to ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::documentOpened: after add: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeProxyModel::KateFileTreeProxyModel: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::setListMode: BEGIN
kate(814)/kate-filetree KateFileTreePluginView::setListMode: treeMode
kate(814)/kate-filetree KateFileTreePluginView::setListMode: END
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: change to unnamed item
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: removing ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(-1,-1,0x0,QObject(0x0) ) previous: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree ProxyItem::remChild: remove ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: parent ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:0) grandparentProxyItemDir(0x0)
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: inserting ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: creating a new root
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x25aa840,0x0,-1,QObject(0x0) ,"/home/tumas")
kate(814)/kate-filetree KateFileTreeModel::handleInsert: add ProxyItemDir(0x25aa840,0x0,-1,"/home/tumas", children:0) to m_root
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x25aa840,0x2146e90,0,QObject(0x0) ,"/home/tumas") toProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: attempting to merge some existing roots
kate(814)/kate-filetree KateFileTreeModel::handleInsert: adding ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:0)
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ".xsession-errors" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreePluginSettings::save: save config!
dolphin(802)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
dolphin(802)/konsole Konsole::Session::run: Attempted to re-run an already running session.
PS: The system is only 2 days old and there were no strange updates or any unusual settings/apps installed.
Last edited by tumas (2013-10-27 07:42:44)Thaodan wrote:Can you write /var/tmp/kdecache-$USER?
What exactly do u mean? There are a few folders/files inside. -
[Solved] Menu Editor not loading.
I installed py solitaire, it didn't show up in the list. I tried to open up the menu editor, and that will not load either. I have fam and alacarte installed, and I am not sure what is wrong. Any help would be greatly appreciated.
Edit: alacarte will not run as a normal user, only as root. Is this normal?
Last edited by perlluver (2008-02-24 21:45:37)perlluver wrote:
I installed py solitaire, it didn't show up in the list. I tried to open up the menu editor, and that will not load either. I have fam and alacarte installed, and I am not sure what is wrong. Any help would be greatly appreciated.
Edit: alacarte will not run as a normal user, only as root. Is this normal?
Ok I ran menu editor from the terminal and I got this message:
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications.menu': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications-merged': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings.menu': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings-merged': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/preferences-merged': Permission denied -
[solved] TV card not loaded after upgrade to kmod
After the upgrade to mkinitcpio and kmod replacing module-init-tools, my TV card (Hauppauge WinTV Nova-S) is not loaded.
Downgrading mkinitcpio and re-installing module-init-tools and regenerating my initramfs and all is well.
Is there any extra setup needed with kmod? There are no man files in the kmod package so I'm at a loss what to do.
Incase it helps, here are (maybe not all) the modules related to my tv card when downgraded:
-->lsmod | grep dvb
cx88_dvb 23415 39
cx88_vp3054_i2c 1932 1 cx88_dvb
videobuf_dvb 4794 1 cx88_dvb
dvb_core 92868 2 cx88_dvb,videobuf_dvb
cx8802 13121 1 cx88_dvb
cx88xx 73365 4 cx88_dvb,cx88_alsa,cx8800,cx8802
videobuf_dma_sg 7936 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 15879 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
i2c_core 20492 15 isl6421,cx24123,wm8775,cx88_dvb,cx88_vp3054_i2c,cx8800,cx88xx,tveeprom,v4l2_common,videodev,i2c_piix4,nouveau,drm_kms_helper,drm,i2c_algo_bit
Last edited by fastfret79 (2012-01-10 22:29:35)Yes - initramfs regenerated after each upgrade and downgrade.
Forgot to mention I was also suffering from the 'Filename too long' FS#27862 and your updated kmod in that bug's comments fixed that. I'm guessing that my issue is unrelated.
With both kmod packages, initramfs complains that /etc/modprobe.d/modprobe.conf doesn't exist, but I've never added anything in there anyway and the kmod package doesn't contain that file.
Last edited by fastfret79 (2012-01-10 11:53:07) -
[Solved] Synaptics driver not loaded
Recently im getting
Couldn't find synaptics properties. No synaptics driver loaded?
when I run synclient
Touchpad still works but the synaptics driver is apparently not loaded. I have xf86-input-synaptics installed.
I can't figure out how to load the synaptics driver.
Last edited by Mythreya (2015-03-10 12:45:34)This started after an update about a week ago. It was working perfectly fine with no effort before. I have an elantech touchpad.
$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=17 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ ASUS USB2.0 Webcam id=14 [slave keyboard (3)]
↳ Asus WMI hotkeys id=15 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=16 [slave keyboard (3)]
↳ USB Keyboard id=11 [slave keyboard (3)]
↳ USB Keyboard
I've mostly found ubuntu forums with the issue, they all linked to the debian wiki on synaptics which didn't help much. Even the allmighty archwiki had no troubleshooting instructions for synaptics.
Last edited by Mythreya (2015-03-06 18:12:37) -
[Solved] power management during kde startup not loading
Hi,
after solving one problem here comes another. From on side it's onying, but on the other side I lesrn a lot about my system.
Well this time after the last kde update, I get the following message:
KDE Power Management System could not be initialized. The backend reported the following error:
No valid Power Management backend plugins are available. A new installation might solve this problem.
Please check your system configuration.
So I went to:System Settings>>Power Management and the pane on the right is greyed out and there is a message:
Power Management configuration module could not be loaded. The Power Management Service appears not to be running.
This can be solved by starting or scheduling it inside "Startup and Shutdown"
System Settings>>Startup and Shutdown>>Service Manager, shows that Power management is running.
If I try to start upower manually I get the following message:
/usr/lib/upower/upowerd
(upowerd:30849): UPower-WARNING **: Failed to acquire org.freedesktop.UPower: Connection ":1.77"
is not allowed to own the service "org.freedesktop.UPower" due to security policies in the configuration file
(upowerd:30849): UPower-WARNING **: Could not acquire name; bailing out
I found this post: http://forums.opensuse.org/showthread.p … KDE-4-11-1
where it states tha this was a bug in some previous kde releases.
Well apparently it happened again here.
I read somewhere that it could be because the policykit rules weren't update. I tried to understand policykit conf files but for no avail. I'm twice lefthanded on that matter.
Any takers?
PS.: Checking with journalctl -r I found that upowerd was masked, so I did;
#systemctl unmask upower.service
than I enabled it;
#systemctl enable upower.service
and if you want to start it right away than;
#systemctl start upower.service
Well that's it.
Last edited by camarao (2014-03-12 14:48:20)Thanks for your answers!
arojas wrote:is the upower daemon running?
Not sure about that. I installed upower but I don't know how to configure it or if any configuration is needed. If I understand official documentation correctly, upower daemon should be started automatically if some application needs it.
cfr wrote:Are you sure that you installed everything necessary for that to work? Which parts of KDE did you install, for example?
I have full KDE installation (# pacman -S kde-meta) so problem should be in my Arch installation, no in KDE itself. I have only installed Arch, Xorg, proprietary Nvidia drivers and KDE so far, so there is only small chance I break or messed up something - it's more likely something I didn't install yet or didn't know how to configure.
Last edited by HungryMonster (2012-07-17 07:52:40) -
[SOLVED] Awesome's not loading
I did some updates and now I awesome won't start, giving this output instead
awesome: error while loading shared libraries: libev.so.3: cannot open shared object file: No such file or directory
After a bit of googling I found this to be a pretty common error, which just requires to recompile awesome, so I reinstalled awesome from the AUR. Since that didn't solve the problem, I tried getting rid of libev and insalling awesome. It installed just fine, but I still got the same error. I also tried awesome-git but with the same result.
I guess I'm doing something wrong since this is fixed for most people by just compiling awesome again but after a few hours of tinkering I don't seem to find what it is.
Any help would be greatly appreciated.
Last edited by Macdelaney (2010-12-17 04:13:05)First of all thanks for your reply.
I do have Libev 4.01-1 and it-s in /usr/lib/libev.so.4 too.
I've removed awesome with yaourt -Rns, then cleared the cache from not installed packaged, and installed awesome again. I repeated this for awesome-git just in case, but the same thing happens. I downloaded the package from the AUR manually and then installed, again, same thing happens.
I must be missing something stupidly obvious, but I can't put my finger in it.
Again, any help would be greatly appreciated.
EDIT: A simple whereis awesome showed that /usr/local/bin/awesome existed, apparently I did this at some point (don't really remember). Running /usr/bin/awesome everything works great.
So yes, pretty stupid on my part!
Last edited by Macdelaney (2010-12-17 04:12:38) -
[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio
EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time: -
[SOLVED] ALSA firmware not loading properly with kernel 3.8.6-1
Hi All,
I have a E-MU 1820 card + breakout box that have been working beautiful under Archlinux for years but now something happen.
It still work OK under windows (dual boot same computer).
Normally during boot all indicators on the breakout box blink and then only thin show is clock setting indicator. But now all the indicators still blink but instead it is a -12 dB indicator that light up and not the clock settings and no sound.
dmesg show following.
[christer@Arch ~]$ dmesg | grep emu
[ 5.269612] emu1010: Special config.
[ 5.269731] emu1010: EMU_HANA_ID = 0x7f
[ 5.274685] emu1010: firmware file = emu/hana.fw, size = 0x133a4
[ 13.465727] emu1010: Hana Firmware loaded
[ 13.465776] emu1010: Hana version: 3.4
[ 13.465864] emu1010: Card options = 0x0
[ 13.465888] emu1010: Card options = 0x0
[ 13.466379] emu1010: Card options3 = 0x0
[ 14.486723] emu1010: Loading Audio Dock Firmware
[ 16.477785] emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x36
[ 16.477809] emu1010: EMU_HANA+DOCK_ID = 0x55
[ 16.477809] emu1010: Audio Dock Firmware loaded
[christer@Arch ~]$
aplay -l looks like it did before.
[christer@Arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
[christer@Arch ~]$
lsmod
[christer@Arch ~]$ lsmod | grep emu
snd_emu10k1 140245 1
snd_util_mem 2403 1 snd_emu10k1
snd_hwdep 6428 1 snd_emu10k1
snd_ac97_codec 113456 1 snd_emu10k1
snd_rawmidi 18831 1 snd_emu10k1
snd_seq_device 5268 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 78146 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7426 2 snd_pcm,snd_emu10k1
snd_timer 18934 3 snd_pcm,snd_seq,snd_emu10k1
snd 60156 13 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
[christer@Arch ~]$
From what I can see all looks OK, like it did when it worked, but something is not at it should.
Any thoughts or ideas about what might have happen or how to progress in troubleshooting.
All input most welcome.
I found info describing problem with firmware loading, but it is over my head.
http://git.kernel.org/cgit/linux/kernel … 54cf7008ab
Output from Aadebug ( http://alsa.opensrc.org/Aadebug )
[christer@Arch ~]$ ./alsadebug
ALSA Audio Debug v0.2.0 - Fri Apr 12 20:46:05 CEST 2013
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt
Kernel ----------------------------------------------------
Linux Arch 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.8.6-1-ARCH.
Loaded Modules --------------------------------------------
snd_emu10k1 139271 2
snd_util_mem 2339 1 snd_emu10k1
snd_hwdep 6364 1 snd_emu10k1
snd_pcm_oss 38511 0
snd_mixer_oss 14995 1 snd_pcm_oss
snd_ac97_codec 112216 1 snd_emu10k1
snd_seq_dummy 1463 0
snd_seq_oss 29098 0
snd_seq_midi_event 5660 1 snd_seq_oss
snd_rawmidi 18742 1 snd_emu10k1
snd_seq 49946 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5180 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 76956 4 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7298 2 snd_pcm,snd_emu10k1
snd_timer 18687 3 snd_pcm,snd_seq,snd_emu10k1
snd 58893 14 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
Proc Asound -----------------------------------------------
0 [EMU1010 ]: Audigy2 - E-mu 1010 [MAEM8810]
E-mu 1010 [MAEM8810] (rev.3, serial:0x40011102) at 0xd000, irq 19
1: : sequencer
2: [ 0- 0]: hardware dependent
3: [ 0- 1]: raw midi
4: [ 0- 0]: raw midi
5: [ 0- 3]: digital audio playback
6: [ 0- 2]: digital audio playback
7: [ 0- 2]: digital audio capture
8: [ 0- 1]: digital audio capture
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0] : control
33: : timer
00-00: EMU10K1 (FX8010)
00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
00-01: emu10k1 mic : Mic Capture : capture 1
00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
00-03: emu10k1 : Multichannel Playback : playback 1
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Connecting To: 15:0
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Client 15 : "OSS sequencer" [Kernel]
Port 0 : "Receiver" (-we-)
Connected From: 0:1
Client 16 : "E-mu 1010 [MAEM8810]" [Kernel]
Port 0 : "Audigy MPU-401 (UART)" (RWeX)
Port 32 : "Audigy MPU-401 #2" (RWeX)
Client 17 : "Emu10k1 WaveTable" [Kernel]
Port 0 : "Emu10k1 Port 0" (-We-)
Port 1 : "Emu10k1 Port 1" (-We-)
Port 2 : "Emu10k1 Port 2" (-We-)
Port 3 : "Emu10k1 Port 3" (-We-)
Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x 2 root root 60 Apr 12 20:42 by-path
crw-rw----+ 1 root audio 116, 11 Apr 12 20:42 controlC0
crw-rw----+ 1 root audio 116, 2 Apr 12 20:42 hwC0D0
crw-rw----+ 1 root audio 116, 12 Apr 12 20:46 hwC0D2
crw-rw----+ 1 root audio 116, 4 Apr 12 20:42 midiC0D0
crw-rw----+ 1 root audio 116, 3 Apr 12 20:42 midiC0D1
crw-rw----+ 1 root audio 116, 13 Apr 12 20:46 midiC0D2
crw-rw----+ 1 root audio 116, 14 Apr 12 20:46 midiC0D3
crw-rw----+ 1 root audio 116, 10 Apr 12 20:42 pcmC0D0c
crw-rw----+ 1 root audio 116, 9 Apr 12 20:43 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Apr 12 20:42 pcmC0D1c
crw-rw----+ 1 root audio 116, 7 Apr 12 20:42 pcmC0D2c
crw-rw----+ 1 root audio 116, 6 Apr 12 20:42 pcmC0D2p
crw-rw----+ 1 root audio 116, 5 Apr 12 20:42 pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 12 20:42 seq
crw-rw----+ 1 root audio 116, 33 Apr 12 20:42 timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
RAM -------------------------------------------------------
MemTotal: 4051696 kB
SwapTotal: 51196 kB
Hardware --------------------------------------------------
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
05:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Interupts -------------------------------------------------
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
6: 1 2 IO-APIC-edge floppy
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 1 IO-APIC-edge i8042
16: 529 493 IO-APIC-fasteoi uhci_hcd:usb1, pata_jmicron, nvidia
18: 10654 10645 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb8, firewire_ohci, i801_smbus
19: 3621 3626 IO-APIC-fasteoi uhci_hcd:usb7, snd_emu10k1
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb5, uhci_hcd:usb6
44: 7637 7652 PCI-MSI-edge ahci
45: 11719 11736 PCI-MSI-edge eth0
NMI: 47 47 Non-maskable interrupts
LOC: 49551 45081 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 47 47 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28730 28313 Rescheduling interrupts
CAL: 94 54 Function call interrupts
TLB: 3503 3509 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
[christer@Arch ~]$
output from systemctl show somw inacive sound related sevices.
alsa-restore.service loaded inactive dead Restore Sound Card State
alsa-store.service loaded inactive dead Store Sound Card State
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
dmeventd.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
lvmetad.service loaded inactive dead LVM2 metadata daemon
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local-shutdown.service loaded inactive dead /etc/rc.local.shutdown Compatibility
rescue.service loaded inactive dead Rescue Shell
systemd-...console.service loaded inactive dead Dispatch Password Requests to Console
systemd-...rd-wall.service loaded inactive dead Forward Password Requests to Wall
systemd-fsck-root.service loaded inactive dead File System Check on Root Device
systemd-...e8ee844.service loaded inactive dead File System Check on /dev/disk/by-uuid/9751ee37-e769-4bbe-9436-2d8e5e8ee844
systemd-...ev-sda2.service loaded inactive dead File System Check on /dev/sda2
systemd-...ev-sda4.service loaded inactive dead File System Check on /dev/sda4
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
systemd-...l-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
systemd-...ed-load.service loaded inactive dead Load Random Seed
systemd-...ed-save.service loaded inactive dead Save Random Seed
systemd-...ad-done.service loaded inactive dead Stop Read-Ahead Data Collection
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-...s-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-...unlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-...hutdown.service loaded inactive dead Update UTMP about System Shutdown
ypbind.service error inactive dead ypbind.service
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs-setup.target error inactive dead remote-fs-setup.target
rescue.target loaded inactive dead Rescue Mode
runlevel1.target error inactive dead runlevel1.target
runlevel2.target error inactive dead runlevel2.target
runlevel3.target error inactive dead runlevel3.target
runlevel4.target error inactive dead runlevel4.target
runlevel5.target error inactive dead runlevel5.target
shutdown.target loaded inactive dead Shutdown
syslog.target error inactive dead syslog.target
umount.target loaded inactive dead Unmount All Filesystems
All the best!
Christer
Last edited by agkbill (2013-04-15 18:41:03)Thank you mich41!
It looks like a kernel bug.
I downgraded to 3.7.10-1 then firmware loaded OK and I could play sounds.
Upgraded to 3.8.6-1 then the firmware fail to load.
Something looks not ok with 3.8.6-1.
Best regards,
Christer -
[SOLVED] KDE will not start, not sure if I set it up correctly
I installed ArchLinux today and I've been looking through the Wiki to get things setup.
In the Desktop Enviornment page it says to install the Xorg server first before installing an enviornment, so I installed xorg-server with: pacman -S xorg-server
I edited /etc/rc.conf to include 'dbus' in the Daemon array
I installed KDE with: pacman -S kde
I edited /etc/inittab to comment out:
#id:3:initdefault:
#x:5:respawn:/usr/bin/xdm -nodaemon
and uncomment:
id:5:initdefault:
x:5:respawn:/usr/bin/kdm -nodaemon
as it said to on the KDE page.
Then I restarted and used 'root' as login and all I saw was the terminal.
I'm not sure if I missed anything (I read through the KDE, Desktop Environment, Xorg, and DisplayManager pages) or if I just did something wrong.
Any help would be appreciated, thank you!
Last edited by harsha (2012-08-04 00:51:26)First, you shouldn't try to login to X as root. Login as your user.
Also, I'd suggest following the beginners guide through testing TWM to make sure you've installed X correctly before you try to get KDE running.
After you've made it through those two steps (or if either fails), come back with the error messages or output you get in the attempt. -
[SOLVED]KDE does not remember window state, restoring from System Tray
Hi,
I'm facing a problem with some KDE applications that dock in the system tray, like Amarok and Konversation. I like to keep these apps maximized. But when I restore them from the system tray, they always revert back to their original, unmaximized size. Is there any workaround or fix for this?
Using KDE 4.3.4-2 (not KDEmod)
Thanks.
Last edited by codemon (2009-12-08 08:56:16)Funny thing happened. I tried out your suggestion for my Firefox window, which would always start in an un-maximized state. It worked perfectly. Then I opened up Konversation and Amarok, and found that they properly remember the window state now!
Thanks for the help. -
I just ran an update a few minutes ago, involving a bunch of kde-related stuff. After the update I noticed I couldn't open kwrite (via the menu), so I tried alt+f2 to open the klauncher. That didn't open either, so I hit reboot (on the menu). Instead of showing the usual reboot dialog, with different options, the screen just went black. So I hit the power button, and booted back up, but starting KDE failed and I was dumped into a terminal. I'm posting this in Firefox running under an X session. Not a ton I can do with that.
I noticed that while shutting down, I get a message seemingly about fam not being found in /etc/rc.d. Could this be the problem? Any ideas on how I can fix this?
Thanks.
Edit: I looked in /etc/rc.d, and fam is most definitely not there. Although now I think of it, I was unable to find and start fam when I first installed kdemod4 and Arch a while ago, so I don't think the missing fam is the problem... installed it via pacman, though, and it starts fine, however I can't start hal now. KDE still won't start, using XFCE for now.
Update: Ended up reinstalling, works fine now.
Last edited by vertimyst (2008-08-17 23:33:16)Hi,
I have sort of the same problem myself as I did a fresh install of Arch yesterday and went with KDE. I remember not even having a fam daemon so I had to pacman it, even after getting it I used the whole:
/etc/rc.d/fam start
/etc/rc.d/hal start
And while that sort of worked I remember getting some missing message beforehand.
Basically, I am able to get into KDE using:
sudo /etc/rc.d/kdm start
Hope that helps, not sure if its a long term solution or not, I'm very new to Arch/Linux, I don't really like KDE anyways, so I might switch to Gnome but best of luck. -
[solved] aesni_intel module not loaded since switch to kmod
Since installing kmod-4-1 as replacement for module-init-tools the AES-NI instruction optimized crypto modules (aesni_intel) don't get loaded automatically anymore.
CPU is a SandyBridge Core-i5 2500K; aes-x86_64 isn't loaded anymore either. The CPU definitely supports AES-NI.
Is this a problem or am I supposed to write those modules down by hand in rc.conf MODULES section?
Kind regards
lynix
Last edited by lynix (2012-02-01 20:57:25)Nevermind. I found the bug -- I'll make sure this is fixed for kmod5.
tech note for those interested:
A module alias can resolve to many modules -- in this case, the alias 'aes' resolves to "aes_generic", "padlock_aes", "aesni_intel", and "aes_x86_64". modprobe, including the library equivalent, should insist on trying to insert all of these. kmod does, but it makes the mistake of quitting if one of them errors out. To wit:
with module-init-tools:
# modprobe -v aes
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
WARNING: Error inserting padlock_aes (/lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz): No such device
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/cryptd.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aes-x86_64.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz
WARNING: Error inserting aesni_intel (/lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz): No such device
with kmod:
# modprobe -v aes
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
ERROR: could not insert 'padlock_aes': No such device
Last edited by falconindy (2012-02-01 20:54:47) -
[SOLVED] Intel microcode not loaded - already available in the bios?
I'm getting ready to the linux 3.17 release and thought I should manually install the Intel microcode.
I noticed that I didn't even have the package installed, so that was my first stop.
After doing the steps outlined in the wiki, I'm not sure it's actually loaded.
The `sig` and `revision` in the available patch and the kernel output is the same.
Does this mean I already have the microcodes updated through the BIOS, or is this irrelevant?
And if it's irrelevant, any idea what I'm doing wrong?
$ uname -a
Linux simendsjo-t520 3.16.7-1-ck #1 SMP PREEMPT Fri Oct 31 13:09:18 CET 2014 x86_64 GNU/Linux
$ dmesg | grep microcode
[ 0.521721] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 0.521739] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 0.521764] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 0.521783] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 0.521894] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
The initrd lines in grub.cfg has been changed (not showing entire config, but it's on each non-fallback initrd line)
(But this should matter yet anyway as I'm on 3.16..?)
# grep intel /boot/grub/grub.cfg
initrd /boot/intel-ucode.img /boot/initramfs-linux-ck.img
initrd /boot/intel-ucode.img /boot/initramfs-linux.img
But iucode_tool says an update is available (ref: https://wiki.archlinux.org/index.php/Microcode)
# bsdtar -Oxf /boot/intel-ucode.img | iucode_tool -tb -lS -
iucode_tool: system has processor(s) with signature 0x000206a7
selected microcodes:
001: sig 0x000206a7, pf mask 0x12, 2013-06-12, rev 0x0029, size 10240
Last edited by simendsjo (2014-11-05 20:12:36)kokoko3k wrote:
I think iucode_tool is just saying that an update has been released for your cpu model.
But yout particular cpu has already it in place.
I don't know if it is the bios to update the microcode or your cpu has been shipped with the new firmware.
Thanks! I don't really care As long as I haven't failed the installation process, I'm happy.
Maybe you are looking for
-
Toshiba Satellite L675D-S7104 wont start up
Looking for help! I was having problems with IE not responding so decided to upgrade to internet explorer 9 during process I needed to know if I had a 64 or 32 bit. So I minimized to check on my start menu and all my icons were gone. After pulling up
-
Folder with exclamation point on ipod - freezes if trying to restore
hi i have quite a peculiar problem with my ipod 5th gen video. i just got it in the mail yesterday and tried to make it work. when i started it up, there was a folder with an exclamation point on it. so i installed the software from the cd and plugge
-
Pan an image by less than 1 pixel/ frame
Hi, is there a common way to pan an image by less than 1 pixel/ frame (maybe by manipulating bitmaps or something?). I need to pan over an image very slowly, but with a smooth motion. thanks jq
-
how can i find out which version is on my machine? I need help recovering over 600 photos that were in my library and now I cannot see them. I rec'd a message the file is unreadable. I believe the version i have is the one that came with the emac in
-
Reciving a serial number upgrade message
downloaded acrobat xi and when i go to launch application i am getting a serial number upgrade message. i have entered the serial number but i am getting a message "this serial number is not for a qualifying product"