[SOLVED] KDEmod - problem with mounting b/c of non-ASCII characters

Hi guys!
I finally set aside a few gigabites for Archlinux - it is no more in a virtual machine So far I managed to configure everything with the excellent wiki. It's runnin' and kickin'. I run accross only one problem:
When I insert a CD with a label that has non-ASCII characters (some Polish ones in my case) and I click on it's icon in Konqueror I get the message that "file such-and-such doesn't exist" - and the Polish characters are clearly misspelled (it is not a fonts' problem - I double checked). I can access the folder either via console or via konqueror if I go to the /media folder, though.
Any ideas how I can fix it? If you need more info, let me know.
Last edited by JeremyTheWicked (2008-05-31 14:46:07)

You're welcome . Now it's advisable for you to edit the title of your initial post: add [SOLVED]. Perhaps more clear wording would be in order, too, for the benefit of the search engine. The problem seems to be a trifle in retrospect, but somehow it takes some effort to find the solution, doesn't it ?

Similar Messages

Issue with Download and Loss of Non-ASCII Characters

I have a need to allow my user to download the contents of an HTML Region as a file. This region contains some Greek letters, i.e. non-ASCII, used with some common finance formulas.
I am able to copy the contents off this region using JavaScript without any issue.
Moreover, I can copy the contents from JavaScript into a Page Item and then render the region with PL/SQL. Again, this works without an issue.
However, when I try to download the region, the Greek letters are lost in the downloaded document. Instead they are replaced with this weird series of characters: (Î”
I've created a sample app to demonstrate this problem at apex.oracle.com:
URL: http://apex.oracle.com/pls/apex/f?p=34765:1
UID: GUEST_DEV
PWD: greeksgone
Click the button labeled "Copy HTML Via JS" and you will see the statically populated region copied into the second region.
Click the button labeled "Copy HTML Via APEX" and you will see the statically populated region copied into the third region. This is achieved by copying the HTML into a Page Item and then submitting the page. When the page returns, the value of this Page Item is then used to populate the third region. As you can see, the Greek letters are there as normal.
However, if you click the "Download HTML" button you will see the the Greek letters are not present in the resulting file.
-Joe

Joe Upshaw wrote:
I am just totally stuck here.
This is what the document looks like without the required meta tag:
<HTML>
<BODY>
<STYLE>
<DIV>
div.riskScenarioMatrixDiv
overflow:auto;
....This version does not display the greek letters.
If I could simply add this one meta tag in, everything would work beautifully:
<HTML>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<BODY>
<STYLE>
<DIV>
div.riskScenarioMatrixDiv
overflow:auto;
....However, I have tried every combination I can think of in the code block but, any time that I add that meta tag, I get a *404 Page Not Found* error.
The only thing standing between what we have and what we need is getting that meta tag in the output but, I just can't seem to find a way to do this. Actually, we'd really like to have, within the head tags; the meta tag, the style and the title but, not being able to get that meta tag in is the difference between acceptable and broken. It works with the others in the body.
DECLARE
ls_RiskMatrixTitle VARCHAR2(32767);
ls_RiskMatrixHTML   VARCHAR2(32767);
ls_DefaultFileName VARCHAR2(512);
BEGIN
ls_RiskMatrixHTML   := :P1_HTML;
ls_DefaultFileName := 'TestMe.html';
ls_RiskMatrixTitle := 'Test of Download';
OWA_UTIL.MIME_HEADER( 'text/html', False, 'UTF8' );
HTP.P( 'Content-Disposition: attachment; filename=' || ls_DefaultFileName );
--HTP.META( 'Content-Type', null, 'text/html; charset=utf-8' );
--HTP.TITLE( ls_RiskMatrixTitle );
OWA_UTIL.HTTP_HEADER_CLOSE;
HTP.HTMLOPEN;
HTP.BODYOPEN;
HTP.STYLE('<DIV>' || :P1_MATRIX_STYLE || '</DIV>');
HTP.P(ls_RiskMatrixTitle);
HTP.P(ls_RiskMatrixHTML);
APEX_APPLICATION.G_UNRECOVERABLE_ERROR := True;
END;
You appear to be confusing HTTP and HTML.
The HTTP header != HTML <tt>head</tt> element.
HTP.META( 'Content-Type', null, 'text/html; charset=utf-8' );
HTP.TITLE( ls_RiskMatrixTitle ); This generates HTML content. It does not go in the HTTP header. You should be generating an HTML <tt>head</tt> element containing this (and the <tt>style</tt> element) between <tt>HTP.HTMLOPEN</tt> and <tt> HTP.BODYOPEN</tt>.
Also note that these web toolkit methods generate really obsolete HTML, therefore I never use them (and nor does APEX these days).
Don't have time to get more into this now...

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

Easier and better ways to solve current problems with Acrobat?

Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
Marc

Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Problems with password including non-ASCII characters

I am a German language user with a German keyboard but an English OS as main language. Therefore my passwords (simple user and admin) includes non-ASCII characters used in German, French and Spanish language, which increases security. This works fine in the majority of login scenarios. There are, however, 3 scenarios where neither my non-ASCII simple user nor my non-ASCII admin PW are accepted:
1) running "sudo" in Terminal;
2) When I try to shut down and another user account is still open. Doing this brings up a login window asking for the PW of the other user that does not accept non-ASCII;
3) Using Leopard/SnowLeopard CacheCleaner. Upon opening, this app asks for an admin PW, but does not recognize non-ASCII.
Am I right in assuming that this has to do with non-ASCII PWs? I thought ASCII times were gone given the remarkable language flexibility of Mac OS over the years. I know this stupid problem only from Win XP. There it is even worse.
Is there a way to overcome this problem without always temporarily changing my PW? Thanks.

I think the problem is with the applications themselves and should be reported to the developer. Although some non-ASCII characters are acceptable for an admin password, in my experience most Unix systems don't like non-ASCII characters in passwords. It may be easier to avoid them if you can.
OS X should simply request your admin password to shut down when another user account is open. An alert dialog usually appears warning that the other user is still logged in and giving you the option to log the other account out then shut down. But in my experience the only authorization needed is for your admin account.

Problem with non-ASCII characters on TTY

Although I'm not a native speaker, I want my system language to be English (US), since that's what I'm used to. However I have a lot of files which have German language in their file names.
My /etc/locale.conf has en_US.UTF-8 and de_DE.UTF-8 enabled. My /etc/locale.conf contains only the line
LANG=en_US.UTF-8
The German file names show up fine within Dolphin and Konsole (ls -a). But they look weird on either of the TTYs (the "console" you get to by pressing e.g. ctrl+alt+F1). They have other characters like '>>' or the paragraph symbol where non-ASCII characters should be. Is it possible to fix this?

I don't think the console font is the problem. I use Lat2-Terminus16 because I read the Beginner's Guide on the wiki while installing the system.
My /etc/vconsole.conf:
KEYMAP=de
FONT=Lat2-Terminus16
showconsolefont even shows me the characters missing in the file names; e.g.: Ö, Ä, Ü

Cannot login with password containing non-ascii characters

Hello,
I have web application, form based login. UTF-8 is specified "everywhere".
And it works, except for passwords.
If user register itself with password containing non-ascii characters, it is correctly written in database, but when doing either programmatic login or normal form based login, if fails.
If the password is only ascii, it works.
Username of login could be ascii or non-ascii, it doesn't matter, both works.
I'm using sun java application server 9.1.
jdbc realm.
I'm not using hashing passwords, just clean (now)
I tried configure realm Charset: UTF8 as last chance, but it doesn't work either.
The problem is only with non-ascii characters in password.
Any help very appreciated
Thanks a lot

hi,
I know all that, but that's not the case. My app uses preparedStatements, everything is properly configured, in all pages, utf-8 is going from user to db and back without any problems.
The only problem is with password field. As I am using form based login, with jdbc realm configured (again, nicely working when only ascii characters), I have very little chance to do something bad through the login phase.
I'm not talking about special characters, I'm talking about non-ascii characters, let's say - Chinese, arabish, Russian alphabet etc.
When user registers (my code), the fields are properly written to db. I have checked that, trust me.
But the Sun app server realm seems to have some problems with the password field.
(realm uses jdbc connection to mysql, the url contains all extra parameters to be sure about utf8. there is nothing more what can be configured...)
If I try other alphabet codes in login and ascii in password, it works. But soon, as I use other alphabet code also in password, it doesn't work anymore.
My only idea is, that I could try MD5 to create ascii only characters (I hope it works that way) on the client with javascript and then set Digest to MD5 in realm configuration. But still, it seems very strange. The clear way storage should also function? (now set Digest to 'none')
Is it a bug of Sun App Server?
thanks

Cannot rename file with non-ASCII characters when using the

My application moves files from one directory to another by calling File[] srcFiles = srcDir.listFiles() to get a list of files in the source directory, and then calling srcFiles.renameTo(destFile) to rename each file.
This does not work (renameTo returns false and the file is not moved) under the following circumstances:
- the file's leaf name contains non-ASCII characters, for example "�"
- the OS is Solaris 9
- the LANG and LC_* environment variables are unset, i.e. the C locale is being used
If I set the LANG environment variable to, for example, en_GB.UTF-8 then the rename succeeds.
I have tried calling srcFiles[index].getName().getBytes("UTF-8") and the non-ASCII characters are being replaced with ? (0x3f) characters when LANG is unset.
Is this a bug in the JRE? I would argue that since my code does not actually manipulate the filename (I just use the File object that File.listFiles() gives me) then the rename should succeed. Of course I would not expect the file name to be displayed correctly if I printed it out.
I have reproduced this behaviour with JDK 1.4.2_05 and 1.5.0_04 on Solaris 9.
Francis

Thanks for the info Alan.
I considered setting the locale in the environment (this sounds like the "correct" fix to me and we might implement it later), but this application shares a WebLogic server with many other applications so we would have to do a huge amount of testing to make sure that the locale change wouldn't break the other apps. In the end I worked around the problem by making the code that generates the filenames in the first place strip out any non-ASCII characters (the names of the files are not critically important).
Looking forward to JSR-203, in the meantime perhaps a note about this behaviour in the java.io.File javadoc would be useful.

Filling clob with non ascii characters

Hello,
I have had some problems with clobs and usage of german
umlauts (��). I was'nt able to insert or update
strings containing umlaute in combination with string
binding. After inserting or updating the umlaut
characters were replaced by strange (spanish) '?'
which were upside down.
However, it was working when I did not use string bindung.
I tried varios things, after some time I tracked
the problem down to to oracle.toplink.queryframework.SQLCall.java. In the
prepareStatement(...) you find something
like
ByteArrayInputStream inputStream = new ByteArrayInputStream(((String) parameter).getBytes());
// Binding starts with a 1 not 0.
statement.setAsciiStream(index + 1, inputStream,((String) parameter).getBytes().length);
I replaced the usage of ByteArrayInputStram with CharArrayReader:
// TH changed, 26.11.2003, Umlaut will not work with this.
CharArrayReader reader = new CharArrayReader(((String) parameter).toCharArray());
statement.setCharacterStream(index + 1, reader, ((String) parameter).length() );
and this worked.
Is there any other way achieving this? Did anyone
get clobs with non ascii characters to work?
Regards -- Tobias
(Toplink 9.0.3, Clob was mapped to String, Driver was Oracle OCI)

I don't think the console font is the problem. I use Lat2-Terminus16 because I read the Beginner's Guide on the wiki while installing the system.
My /etc/vconsole.conf:
KEYMAP=de
FONT=Lat2-Terminus16
showconsolefont even shows me the characters missing in the file names; e.g.: Ö, Ä, Ü

[SOLVED] KDEmod - problem with mounting b/c of non-ASCII characters

Similar Messages

Maybe you are looking for