[Solved] kernel 2.6.28.1 compilation fails with reiser4 patch
Hi,
has anyone had problems compiling the latest kernel with the reiser4 patch?
The patching process itself completes successfully apart from this part:
patching file include/linux/fs.h
Hunk #1 succeeded at 1372 (offset 3 lines).
Hunk #2 succeeded at 1811 (offset 3 lines).
patching file mm/filemap.c
While the compilation fails here
CC fs/reiser4/plugin/file/file_conversion.o
fs/reiser4/plugin/file/file_conversion.c: In function 'reiser4_write_begin_careful':
fs/reiser4/plugin/file/file_conversion.c:689: error: implicit declaration of function '__grab_cache_page'
fs/reiser4/plugin/file/file_conversion.c:689: warning: assignment makes pointer from integer without a cast
make[2]: *** [fs/reiser4/plugin/file/file_conversion.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
Or is it just me doing something wrong?
Last edited by moz (2009-01-23 13:08:27)
moz wrote:
Hi,
has anyone had problems compiling the latest kernel with the reiser4 patch?
The patching process itself completes successfully apart from this part:
patching file include/linux/fs.h
Hunk #1 succeeded at 1372 (offset 3 lines).
Hunk #2 succeeded at 1811 (offset 3 lines).
patching file mm/filemap.c
While the compilation fails here
CC fs/reiser4/plugin/file/file_conversion.o
fs/reiser4/plugin/file/file_conversion.c: In function 'reiser4_write_begin_careful':
fs/reiser4/plugin/file/file_conversion.c:689: error: implicit declaration of function '__grab_cache_page'
fs/reiser4/plugin/file/file_conversion.c:689: warning: assignment makes pointer from integer without a cast
make[2]: *** [fs/reiser4/plugin/file/file_conversion.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
Or is it just me doing something wrong?
It is a well known issue
Similar Messages
-
[SOLVED] Kernels from the AUR not compiling properly
Hiya everyone,
I've got a bit of a problem, I think. Early this evening I tried downloading and making the Linux-lqx kernel from the AUR. Largely because why not.
After the tarball downloaded, I ran tar -xvf on it like I always do, ran namcap on the PKGBUILD (it came up with a few superfluous errors), and ran makepkg -s on the PKGBUILD. It downloaded the relevant source, then immediately failed the PGP signature check. I was like, "Oh you AUR!" and ran makepkg -s --skippgpcheck. It did it's thing until it was applying patches, at which point it just failed at a certain point with "ERROR: A failure occured in prepare()", and aborted. I reported the error and the lines that preceded it in the package's page in the AUR.
I got suspicious, and tried the Linux-lbre-xen kernel to test the building of it. Same issue: a prepare() error. Baffled, I thought maybe my building system was broken. I recompiled a few packages I had already built and installed successfully, and they were fine. I grabbed a few more tarballs from the AUR: adobe-air, I think jre, and something else. They all compiled great and installed just fine. Confused, I then tried building Linux-ck. Another prepare() error!
Then I noticed the line that preceded the error, "patching file virt/kvm/kvm_main.c", then the error. Going back to lqx and libre-xen, I tried compiling them again, and sure enough "patching file virt/kvm/kvm_main.c" directly preceded the prepare() error.
What's going on here? Strangely, every kernel I try from the AUR fails the PGP signature check, too. Just the kernels - everything else works as expected. Am I missing something?
Last edited by MrEvilBreakfast (2015-05-24 18:59:02)The build goes fine until:
==> Starting prepare()...
The next patch would create the file Documentation/ABI/testing/debugfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/ABI/testing/sysfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
The next patch would create the file Documentation/filesystems/aufs/README,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/01intro.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/02struct.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03atomic_open.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03lookup.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/04branch.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/05wbr_policy.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06fhsm.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06mmap.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06xattr.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/07export.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/08shwh.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/10dynop.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/99plan.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/kernel-parameters.txt
patching file Documentation/networking/scaling.txt
The next patch would create the file Documentation/scheduler/sched-BFS.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/scsi/link_power_management_policy.txt
patching file Documentation/sysctl/kernel.txt
The next patch would create the file Documentation/tp_smapi.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/virtual/kvm/devices/s390_flic.txt
patching file MAINTAINERS
patching file Makefile
patching file arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
patching file arch/arm/boot/dts/at91-sama5d3_xplained.dts
patching file arch/arm/boot/dts/dove.dtsi
patching file arch/arm/boot/dts/exynos5250-spring.dts
patching file arch/arm/boot/dts/imx23-olinuxino.dts
patching file arch/arm/boot/dts/imx25.dtsi
patching file arch/arm/boot/dts/imx28.dtsi
patching file arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
patching file arch/arm/boot/dts/omap3-n900.dts
patching file arch/arm/boot/dts/ste-dbx5x0.dtsi
patching file arch/arm/boot/dts/ste-href.dtsi
patching file arch/arm/boot/dts/ste-snowball.dts
patching file arch/arm/include/asm/elf.h
patching file arch/arm/include/uapi/asm/kvm.h
patching file arch/arm/kernel/Makefile
patching file arch/arm/kernel/hibernate.c
patching file arch/arm/kernel/process.c
The next patch would create the file arch/arm/kernel/psci-call.S,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kernel/psci.c
The next patch would create the file arch/arm/kernel/reboot.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kvm/arm.c
patching file arch/arm/mach-mvebu/pmsu.c
patching file arch/arm/mach-omap2/prm-regbits-34xx.h
patching file arch/arm/mach-omap2/prm-regbits-44xx.h
patching file arch/arm/mach-omap2/vc.c
patching file arch/arm/mach-omap2/vc.h
patching file arch/arm/mach-omap2/vc3xxx_data.c
patching file arch/arm/mach-omap2/vc44xx_data.c
patching file arch/arm/mach-s3c64xx/crag6410.h
patching file arch/arm/mach-s3c64xx/mach-crag6410.c
patching file arch/arm/net/bpf_jit_32.c
patching file arch/arm64/Kconfig
patching file arch/arm64/Makefile
patching file arch/arm64/include/asm/cpufeature.h
patching file arch/arm64/include/asm/smp_plat.h
patching file arch/arm64/include/uapi/asm/kvm.h
patching file arch/arm64/kernel/cpu_errata.c
patching file arch/arm64/kernel/entry.S
patching file arch/arm64/kernel/head.S
patching file arch/arm64/kernel/setup.c
patching file arch/arm64/kernel/smp.c
patching file arch/arm64/mm/dma-mapping.c
patching file arch/c6x/kernel/time.c
patching file arch/mips/Kconfig
patching file arch/mips/Makefile
patching file arch/mips/bcm47xx/board.c
patching file arch/mips/bcm63xx/prom.c
patching file arch/mips/bcm63xx/setup.c
patching file arch/mips/cavium-octeon/dma-octeon.c
patching file arch/mips/cavium-octeon/setup.c
patching file arch/mips/include/asm/asm-eva.h
patching file arch/mips/include/asm/cacheflush.h
patching file arch/mips/include/asm/cpu-features.h
patching file arch/mips/include/asm/elf.h
patching file arch/mips/include/asm/fpu.h
patching file arch/mips/include/asm/kvm_host.h
patching file arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
patching file arch/mips/include/asm/octeon/cvmx.h
patching file arch/mips/include/asm/octeon/pci-octeon.h
patching file arch/mips/include/asm/pgtable.h
patching file arch/mips/include/asm/r4kcache.h
patching file arch/mips/include/asm/spinlock.h
patching file arch/mips/kernel/entry.S
patching file arch/mips/kernel/smp-cps.c
patching file arch/mips/kernel/unaligned.c
patching file arch/mips/kvm/emulate.c
patching file arch/mips/kvm/mips.c
patching file arch/mips/kvm/trap_emul.c
patching file arch/mips/loongson/loongson-3/irq.c
patching file arch/mips/mm/cache.c
patching file arch/mips/mm/tlbex.c
patching file arch/mips/mti-malta/malta-memory.c
patching file arch/mips/netlogic/xlp/ahci-init-xlp2.c
patching file arch/mips/pci/Makefile
patching file arch/mips/pci/pci-octeon.c
patching file arch/mips/pci/pcie-octeon.c
patching file arch/mips/power/hibernate.S
patching file arch/mips/ralink/Kconfig
patching file arch/powerpc/kernel/cacheinfo.c
patching file arch/powerpc/mm/hugetlbpage.c
patching file arch/powerpc/perf/callchain.c
patching file arch/powerpc/platforms/cell/interrupt.c
patching file arch/powerpc/platforms/cell/iommu.c
patching file arch/powerpc/platforms/cell/spufs/sched.c
patching file arch/powerpc/platforms/powernv/pci-ioda.c
patching file arch/s390/kernel/suspend.c
patching file arch/s390/kvm/interrupt.c
patching file arch/s390/kvm/kvm-s390.h
patching file arch/s390/kvm/priv.c
patching file arch/x86/Kconfig
patching file arch/x86/Kconfig.cpu
patching file arch/x86/Makefile_32.cpu
patching file arch/x86/include/asm/insn.h
patching file arch/x86/include/asm/mwait.h
patching file arch/x86/include/asm/pvclock.h
patching file arch/x86/include/asm/spinlock.h
patching file arch/x86/kernel/acpi/boot.c
patching file arch/x86/kernel/apic/io_apic.c
patching file arch/x86/kernel/cpu/intel.c
patching file arch/x86/kernel/cpu/perf_event_intel_ds.c
patching file arch/x86/kernel/early_printk.c
patching file arch/x86/kernel/ioport.c
patching file arch/x86/kernel/process.c
patching file arch/x86/kernel/pvclock.c
patching file arch/x86/kvm/vmx.c
patching file arch/x86/kvm/x86.c
patching file arch/x86/lib/insn.c
patching file arch/x86/lib/usercopy_64.c
patching file arch/x86/pci/acpi.c
patching file arch/x86/platform/efi/early_printk.c
patching file arch/x86/tools/test_get_len
patching file arch/x86/vdso/vclock_gettime.c
patching file arch/xtensa/Kconfig
patching file arch/xtensa/include/uapi/asm/unistd.h
patching file arch/xtensa/platforms/iss/network.c
patching file arch/xtensa/platforms/xtfpga/Makefile
patching file arch/xtensa/platforms/xtfpga/include/platform/hardware.h
patching file arch/xtensa/platforms/xtfpga/include/platform/lcd.h
patching file arch/xtensa/platforms/xtfpga/lcd.c
patching file block/Kconfig.iosched
patching file block/Makefile
The next patch would create the file block/bfq-cgroup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-ioc.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-iosched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-sched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file block/blk-core.c
patching file block/blk-mq.c
patching file block/blk-sysfs.c
patching file drivers/accessibility/braille/braille_console.c
patching file drivers/acpi/acpi_pnp.c
patching file drivers/acpi/acpica/acmacros.h
patching file drivers/acpi/acpica/dsopcode.c
patching file drivers/acpi/acpica/evgpe.c
patching file drivers/acpi/acpica/evregion.c
patching file drivers/acpi/acpica/exdump.c
patching file drivers/acpi/acpica/exfldio.c
patching file drivers/acpi/acpica/exregion.c
patching file drivers/acpi/acpica/hwgpe.c
patching file drivers/acpi/acpica/hwvalid.c
patching file drivers/acpi/acpica/nsdump.c
patching file drivers/acpi/acpica/tbdata.c
patching file drivers/acpi/acpica/tbinstal.c
patching file drivers/acpi/acpica/tbprint.c
patching file drivers/acpi/acpica/tbxfroot.c
patching file drivers/acpi/acpica/utaddress.c
patching file drivers/acpi/blacklist.c
patching file drivers/acpi/resource.c
patching file drivers/acpi/sbs.c
patching file drivers/acpi/sbshc.c
patching file drivers/acpi/scan.c
patching file drivers/ata/acard-ahci.c
patching file drivers/ata/ahci.c
patching file drivers/ata/ahci.h
patching file drivers/ata/libahci.c
patching file drivers/ata/libahci_platform.c
patching file drivers/ata/libata-core.c
patching file drivers/ata/libata-eh.c
patching file drivers/ata/libata-pmp.c
patching file drivers/ata/libata-scsi.c
patching file drivers/ata/libata.h
patching file drivers/ata/sata_highbank.c
patching file drivers/base/bus.c
patching file drivers/base/cacheinfo.c
patching file drivers/base/platform.c
patching file drivers/block/loop.c
patching file drivers/block/rbd.c
patching file drivers/bluetooth/ath3k.c
patching file drivers/bluetooth/btusb.c
patching file drivers/char/tpm/tpm-chip.c
patching file drivers/clk/at91/clk-usb.c
patching file drivers/clk/qcom/clk-rcg.c
patching file drivers/clk/qcom/clk-rcg.h
patching file drivers/clk/qcom/clk-rcg2.c
patching file drivers/clk/qcom/gcc-ipq806x.c
patching file drivers/clk/qcom/lcc-ipq806x.c
patching file drivers/clk/samsung/clk-exynos4.c
patching file drivers/clk/tegra/clk-tegra124.c
patching file drivers/clk/tegra/clk.c
patching file drivers/cpufreq/cpufreq.c
patching file drivers/cpufreq/cpufreq_conservative.c
patching file drivers/cpufreq/cpufreq_ondemand.c
patching file drivers/cpufreq/intel_pstate.c
patching file drivers/crypto/omap-aes.c
patching file drivers/gpio/gpio-mvebu.c
patching file drivers/gpio/gpiolib-sysfs.c
patching file drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
patching file drivers/gpu/drm/drm_irq.c
patching file drivers/gpu/drm/exynos/exynos_dp_core.c
patching file drivers/gpu/drm/exynos/exynos_drm_fimd.c
The next patch would create the file drivers/gpu/drm/exynos/exynos_drm_fimd.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/gpu/drm/i2c/adv7511.c
patching file drivers/gpu/drm/i915/i915_drv.c
patching file drivers/gpu/drm/i915/i915_irq.c
patching file drivers/gpu/drm/i915/i915_reg.h
patching file drivers/gpu/drm/i915/intel_display.c
patching file drivers/gpu/drm/i915/intel_dp.c
patching file drivers/gpu/drm/i915/intel_i2c.c
patching file drivers/gpu/drm/i915/intel_lvds.c
patching file drivers/gpu/drm/radeon/atombios_crtc.c
patching file drivers/gpu/drm/radeon/atombios_encoders.c
patching file drivers/gpu/drm/radeon/dce6_afmt.c
patching file drivers/gpu/drm/radeon/evergreen_hdmi.c
patching file drivers/gpu/drm/radeon/r600_hdmi.c
patching file drivers/gpu/drm/radeon/radeon_asic.c
patching file drivers/gpu/drm/radeon/radeon_asic.h
patching file drivers/gpu/drm/radeon/radeon_audio.c
patching file drivers/gpu/drm/radeon/radeon_connectors.c
patching file drivers/gpu/drm/radeon/radeon_cs.c
patching file drivers/gpu/drm/radeon/radeon_ttm.c
patching file drivers/gpu/drm/radeon/radeon_uvd.c
patching file drivers/gpu/drm/radeon/radeon_vce.c
patching file drivers/gpu/drm/radeon/radeon_vm.c
patching file drivers/gpu/drm/radeon/rv770d.h
patching file drivers/gpu/drm/radeon/si_dpm.c
patching file drivers/gpu/drm/radeon/uvd_v1_0.c
patching file drivers/gpu/drm/radeon/uvd_v2_2.c
patching file drivers/hid/Kconfig
patching file drivers/hid/Makefile
patching file drivers/hid/hid-ids.h
patching file drivers/hid/hid-multitouch.c
The next patch would create the file drivers/hid/huiontablet.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/hid/usbhid/hid-quirks.c
patching file drivers/hv/channel.c
patching file drivers/hv/channel_mgmt.c
patching file drivers/i2c/busses/i2c-rk3x.c
patching file drivers/i2c/i2c-core.c
patching file drivers/i2c/i2c-mux.c
patching file drivers/idle/intel_idle.c
patching file drivers/infiniband/core/cma.c
patching file drivers/infiniband/core/umem.c
patching file drivers/infiniband/hw/mlx4/qp.c
patching file drivers/infiniband/ulp/iser/iser_initiator.c
patching file drivers/infiniband/ulp/isert/ib_isert.c
patching file drivers/input/input-mt.c
patching file drivers/input/joydev.c
patching file drivers/input/mouse/alps.c
patching file drivers/input/mouse/elantech.c
patching file drivers/input/mouse/elantech.h
patching file drivers/input/mouse/synaptics.c
patching file drivers/input/mouse/synaptics.h
patching file drivers/macintosh/Kconfig
patching file drivers/macintosh/adbhid.c
patching file drivers/md/md.c
patching file drivers/md/raid0.c
patching file drivers/media/platform/marvell-ccic/mcam-core.c
patching file drivers/media/platform/marvell-ccic/mcam-core.h
patching file drivers/media/rc/img-ir/img-ir-core.c
patching file drivers/media/usb/stk1160/stk1160-v4l.c
patching file drivers/memstick/core/mspro_block.c
patching file drivers/mfd/mfd-core.c
patching file drivers/mmc/card/block.c
patching file drivers/mmc/card/queue.c
patching file drivers/mmc/card/queue.h
patching file drivers/mmc/core/core.c
patching file drivers/mmc/host/sh_mmcif.c
patching file drivers/mmc/host/sunxi-mmc.c
patching file drivers/mmc/host/tmio_mmc_pio.c
patching file drivers/mtd/ubi/attach.c
patching file drivers/mtd/ubi/cdev.c
patching file drivers/mtd/ubi/eba.c
patching file drivers/mtd/ubi/wl.c
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
patching file drivers/net/ethernet/cadence/macb.c
patching file drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
patching file drivers/net/ethernet/intel/e1000/e1000_main.c
patching file drivers/net/ethernet/marvell/pxa168_eth.c
patching file drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
patching file drivers/net/ethernet/mellanox/mlx4/en_netdev.c
patching file drivers/net/ethernet/mellanox/mlx4/en_rx.c
patching file drivers/net/ethernet/mellanox/mlx4/en_tx.c
patching file drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
patching file drivers/net/netconsole.c
patching file drivers/net/ppp/ppp_generic.c
patching file drivers/net/vxlan.c
patching file drivers/net/wireless/hostap/hostap.h
patching file drivers/net/wireless/hostap/hostap_ap.c
patching file drivers/net/wireless/hostap/hostap_config.h
patching file drivers/net/wireless/hostap/hostap_hw.c
patching file drivers/net/wireless/hostap/hostap_info.c
patching file drivers/net/wireless/hostap/hostap_ioctl.c
patching file drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
patching file drivers/net/wireless/ti/wl18xx/debugfs.c
patching file drivers/net/wireless/ti/wlcore/debugfs.h
patching file drivers/nfc/st21nfcb/i2c.c
patching file drivers/pinctrl/core.c
patching file drivers/pinctrl/core.h
patching file drivers/pinctrl/devicetree.c
patching file drivers/platform/x86/Kconfig
patching file drivers/platform/x86/Makefile
patching file drivers/platform/x86/compal-laptop.c
patching file drivers/platform/x86/hdaps.c
The next patch would create the file drivers/platform/x86/thinkpad_ec.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/platform/x86/tp_smapi.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/power/ipaq_micro_battery.c
patching file drivers/power/lp8788-charger.c
patching file drivers/power/twl4030_madc_battery.c
patching file drivers/rtc/rtc-armada38x.c
patching file drivers/scsi/3w-9xxx.c
patching file drivers/scsi/3w-9xxx.h
patching file drivers/scsi/3w-sas.c
patching file drivers/scsi/3w-sas.h
patching file drivers/scsi/3w-xxxx.c
patching file drivers/scsi/3w-xxxx.h
patching file drivers/scsi/megaraid/megaraid_sas_fusion.c
patching file drivers/scsi/mvsas/mv_sas.c
patching file drivers/scsi/scsi_devinfo.c
patching file drivers/scsi/scsi_scan.c
patching file drivers/scsi/sd.c
patching file drivers/scsi/sd_dif.c
patching file drivers/scsi/storvsc_drv.c
patching file drivers/spi/spi-imx.c
patching file drivers/spi/spidev.c
patching file drivers/ssb/Kconfig
patching file drivers/staging/Kconfig
patching file drivers/staging/Makefile
patching file drivers/staging/android/sync.c
patching file drivers/staging/panel/panel.c
The next patch would create the file drivers/staging/vhba/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/vhba.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/staging/vt6655/rxtx.c
patching file drivers/target/iscsi/iscsi_target.c
patching file drivers/target/iscsi/iscsi_target_erl0.c
patching file drivers/target/iscsi/iscsi_target_login.c
patching file drivers/target/target_core_file.c
patching file drivers/target/target_core_sbc.c
patching file drivers/target/target_core_transport.c
patching file drivers/tty/Kconfig
patching file drivers/tty/hvc/hvc_xen.c
patching file drivers/tty/serial/8250/8250_core.c
patching file drivers/tty/serial/8250/8250_dw.c
patching file drivers/tty/serial/8250/8250_early.c
patching file drivers/tty/serial/atmel_serial.c
patching file drivers/tty/serial/imx.c
patching file drivers/tty/serial/of_serial.c
patching file drivers/tty/serial/uartlite.c
patching file drivers/tty/serial/xilinx_uartps.c
patching file drivers/tty/vt/vt.c
patching file drivers/usb/chipidea/otg_fsm.c
patching file drivers/usb/class/cdc-acm.c
patching file drivers/usb/class/cdc-wdm.c
patching file drivers/usb/core/hub.c
patching file drivers/usb/dwc2/hcd.c
patching file drivers/usb/gadget/legacy/printer.c
patching file drivers/usb/host/ehci-hcd.c
patching file drivers/usb/host/ehci-hub.c
patching file drivers/usb/host/fotg210-hcd.c
patching file drivers/usb/host/fusbh200-hcd.c
patching file drivers/usb/host/isp116x-hcd.c
patching file drivers/usb/host/oxu210hp-hcd.c
patching file drivers/usb/host/r8a66597-hcd.c
patching file drivers/usb/host/sl811-hcd.c
patching file drivers/usb/host/uhci-hub.c
patching file drivers/usb/host/xhci-ring.c
patching file drivers/usb/isp1760/isp1760-hcd.c
patching file drivers/usb/musb/musb_core.c
patching file drivers/usb/musb/musb_virthub.c
patching file drivers/usb/phy/phy.c
patching file drivers/usb/storage/uas-detect.h
patching file drivers/usb/storage/uas.c
patching file drivers/usb/storage/usb.c
patching file drivers/vfio/vfio.c
patching file drivers/video/logo/Kconfig
patching file drivers/video/logo/Makefile
patching file drivers/video/logo/logo.c
The next patch would create the file drivers/video/logo/logo_arch_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_bsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_debian_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_exherbo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fbsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedoraglossy_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedorasimple_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_gentoo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_oldzen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_slackware_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_tits_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_zen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/xen/events/events_2l.c
patching file drivers/xen/events/events_base.c
patching file drivers/xen/xen-pciback/conf_space.c
patching file drivers/xen/xen-pciback/conf_space.h
patching file drivers/xen/xen-pciback/conf_space_header.c
patching file drivers/xen/xenbus/xenbus_probe.c
patching file fs/Kconfig
patching file fs/Makefile
The next patch would create the file fs/aufs/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/aufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/export.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/f_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fhsm.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/finfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fstype.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsplus.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_add.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_del.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_ren.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/iinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/ioctl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/magic.mk,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/mvdown.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/plink.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/poll.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/posix_acl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/procfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rdu.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rwsem.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sbinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/spl.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysrq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vdir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wbr_policy.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xattr.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xino.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file fs/binfmt_elf.c
patching file fs/btrfs/extent-tree.c
patching file fs/btrfs/ioctl.c
patching file fs/btrfs/send.c
patching file fs/btrfs/xattr.c
patching file fs/buffer.c
patching file fs/coredump.c
patching file fs/dcache.c
patching file fs/exec.c
patching file fs/ext4/extents.c
patching file fs/ext4/extents_status.c
patching file fs/ext4/inode.c
patching file fs/ext4/namei.c
patching file fs/file_table.c
patching file fs/hfsplus/xattr.c
patching file fs/inode.c
patching file fs/lockd/svcsubs.c
patching file fs/namei.c
patching file fs/namespace.c
patching file fs/nfs/callback.c
patching file fs/nfs/direct.c
patching file fs/nfs/nfs4xdr.c
patching file fs/nfs/read.c
patching file fs/nfs/write.c
patching file fs/nfsd/nfs4proc.c
patching file fs/nfsd/nfs4state.c
patching file fs/nfsd/nfs4xdr.c
patching file fs/nfsd/nfsctl.c
patching file fs/nfsd/nfsd.h
patching file fs/nilfs2/btree.c
patching file fs/notify/group.c
patching file fs/notify/mark.c
patching file fs/ocfs2/dlm/dlmmaster.c
patching file fs/open.c
patching file fs/pnode.c
patching file fs/pnode.h
patching file fs/proc/base.c
patching file fs/proc/nommu.c
patching file fs/proc/task_mmu.c
patching file fs/proc/task_nommu.c
patching file fs/splice.c
patching file fs/xattr.c
patching file include/acpi/acconfig.h
patching file include/acpi/acpixf.h
patching file include/acpi/actypes.h
patching file include/acpi/platform/acenv.h
patching file include/dt-bindings/clock/tegra124-car-common.h
patching file include/linux/bpf.h
patching file include/linux/cgroup_subsys.h
patching file include/linux/console.h
patching file include/linux/file.h
patching file include/linux/init_task.h
patching file include/linux/ioprio.h
patching file include/linux/jiffies.h
patching file include/linux/libata.h
patching file include/linux/linux_logo.h
patching file include/linux/mm.h
patching file include/linux/mm_types.h
patching file include/linux/mount.h
patching file include/linux/nilfs2_fs.h
patching file include/linux/sched.h
patching file include/linux/sched/prio.h
patching file include/linux/skbuff.h
patching file include/linux/splice.h
The next patch would create the file include/linux/thinkpad_ec.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/linux/usb.h
patching file include/linux/usb_usual.h
patching file include/scsi/scsi_devinfo.h
patching file include/sound/emu10k1.h
patching file include/sound/soc-dapm.h
patching file include/target/iscsi/iscsi_target_core.h
patching file include/target/target_core_base.h
The next patch would create the file include/trace/events/fs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/Kbuild
The next patch would create the file include/uapi/linux/aufs_type.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/nfsd/debug.h
patching file include/uapi/linux/sched.h
patching file include/uapi/linux/vt.h
patching file include/video/samsung_fimd.h
patching file init/Kconfig
patching file init/main.c
patching file kernel/bpf/core.c
patching file kernel/bpf/verifier.c
patching file kernel/debug/kdb/kdb_io.c
patching file kernel/delayacct.c
patching file kernel/exit.c
patching file kernel/fork.c
patching file kernel/printk/printk.c
patching file kernel/ptrace.c
patching file kernel/sched/Makefile
The next patch would create the file kernel/sched/bfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file kernel/sched/bfs_sched.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file kernel/sched/core.c
patching file kernel/sched/deadline.c
patching file kernel/sched/fair.c
patching file kernel/sched/idle.c
patching file kernel/sched/stats.c
patching file kernel/stop_machine.c
patching file kernel/sysctl.c
patching file kernel/time/Kconfig
patching file kernel/time/posix-cpu-timers.c
patching file kernel/trace/ring_buffer.c
patching file kernel/trace/trace_events.c
patching file kernel/trace/trace_functions_graph.c
patching file kernel/trace/trace_selftest.c
patching file lib/Kconfig.debug
patching file lib/string.c
patching file mm/Makefile
patching file mm/filemap.c
patching file mm/huge_memory.c
patching file mm/hugetlb.c
patching file mm/madvise.c
patching file mm/memory-failure.c
patching file mm/memory.c
patching file mm/mempolicy.c
patching file mm/mmap.c
patching file mm/msync.c
patching file mm/nommu.c
patching file mm/page-writeback.c
The next patch would create the file mm/prfile.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file net/bridge/br_netfilter.c
patching file net/core/dev.c
patching file net/core/skbuff.c
patching file net/ethernet/eth.c
patching file net/ipv4/Kconfig
patching file net/ipv4/geneve.c
patching file net/ipv4/ip_forward.c
patching file net/ipv4/ping.c
patching file net/ipv4/route.c
patching file net/ipv4/tcp_output.c
patching file net/mac80211/mlme.c
patching file net/netlink/af_netlink.c
patching file scripts/mkcompile_h
patching file security/commoncap.c
patching file security/device_cgroup.c
patching file security/security.c
patching file sound/oss/sequencer.c
patching file sound/pci/emu10k1/emu10k1.c
patching file sound/pci/emu10k1/emu10k1_callback.c
patching file sound/pci/emu10k1/emu10k1_main.c
patching file sound/pci/emu10k1/emupcm.c
patching file sound/pci/emu10k1/emuproc.c
patching file sound/pci/emu10k1/memory.c
patching file sound/pci/hda/hda_codec.c
patching file sound/pci/hda/patch_realtek.c
patching file sound/pci/hda/thinkpad_helper.c
patching file sound/soc/codecs/cs4271.c
patching file sound/soc/codecs/pcm512x.c
patching file sound/soc/codecs/rt5677.c
patching file sound/soc/codecs/tfa9879.c
patching file sound/soc/codecs/wm8741.c
patching file sound/soc/davinci/davinci-evm.c
patching file sound/soc/samsung/s3c24xx-i2s.c
patching file sound/synth/emux/emux_oss.c
patching file sound/synth/emux/emux_seq.c
patching file sound/usb/quirks.c
patching file tools/lib/traceevent/kbuffer-parse.c
patching file tools/perf/config/Makefile
patching file tools/perf/tests/make
patching file tools/perf/util/cloexec.c
patching file tools/perf/util/cloexec.h
patching file tools/perf/util/symbol-elf.c
patching file tools/power/x86/turbostat/Makefile
patching file virt/kvm/arm/vgic.c
patching file virt/kvm/kvm_main.c
==> ERROR: A failure occurred in prepare().
Aborting...
Last edited by MrEvilBreakfast (2015-05-24 17:08:08) -
Kernel compile fail with CFLAGS
Well something really strange is happening when i try to complile my 2.6 kernel with these flags
make CFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer" CXXFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer"
In file included from include/linux/kernel_stat.h:5,
from init/main.c:33:
include/asm/irq.h:16:25: irq_vectors.h: No such file or directory
In file included from init/main.c:33:
include/linux/kernel_stat.h:28: error: `NR_IRQS' undeclared here (not in a function)
make[1]: *** [init/main.o] Error 1
make: *** [init] Error 2
i really dont understand why i am getting this error.I believe that i must include some features to my kernel config since i am trying to get the best out of it.Any help?Simply don't do hardcore optimalization for your kernel, it is already optimized by hand where needed, so it shouldn't make that much difference. Don't do much else than -march=cputype, and best you can do is compiling it with a newer GCC version. It's better to keep it small by choosing only the features you need than to make it unstable or break it with extreme optimalizations that only work counter-productive like -O3. If you want something big and important to attack, then take a look at glibc...
-
JSP compilation failed with java.lang.IllegalStateException: zip file close
Hi,
I have a web app successfully deployed on Weblogic7.0 and HP UX 11.0, which uses jdk 1.3.1_02
In this application, when i invoke a jsp (this exception occurs on any jsp not to any specific jsp), i found the following exception trace on wl-domain.log file and server crashes: -
java.lang.IllegalStateException: zip file closed
at java.util.zip.ZipFile.getEntry(Unknown Source)
at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java, Compiled Code)
at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java, Compiled Code)
at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java, Compiled Code)
at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java, Compiled Code)
at weblogic.utils.classloaders.MultiClassFinder.getClassSource(MultiClassFinder.java, Compiled Code)
at weblogic.utils.classloaders.ChangeAwareClassLoader.upToDate(ChangeAwareClassLoader.java, Compiled Code)
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java, Compiled Code)
at weblogic.servlet.internal.ServletStubImpl.checkForReload(ServletStubImpl.java, Compiled Code)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java, Compiled Code)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java, Compiled Code)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java, Compiled Code)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java, Compiled Code)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java, Compiled Code)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java, Compiled Code)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java, Compiled Code)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Can anyone help me in figuring out this problem urgently?
thanks in advance
manojHi Manoj.I am also getting the same problem in the weblogicserver version-6.1 SP2.It is also using the jdk 1.31.
here is my stack trace.Help i smuch appreciated.!!
java.lang.IllegalStateException: zip file closed
at java.util.zip.ZipFile.getEntry(ZipFile.java:141)
at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java:197)
at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java:106)
at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:53)
at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:53)
at weblogic.utils.classloaders.MultiClassFinder.getClassSource(MultiClassFinder.java:45)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:265)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:156)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:65)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
at org.exolab.castor.xml.Unmarshaller.unmarshal(Unknown Source)
at org.exolab.castor.xml.Unmarshaller.unmarshal(Unknown Source)
at org.exolab.castor.xml.Unmarshaller.unmarshal(Unknown Source)
at com.slfc.framework.service.ServiceMessageFactory.createServiceResult(ServiceMessageFactory.java:58)
at sunlife.nexus.admin.SecPro.establishSupportSession(Unknown Source)
at sunlife.nexus.admin.Page_secPro_extAppLoader.processPageRequest(Unknown Source)
at sunlife.wis.servlets.WISServlet.redirect(WISServlet.java:63)
at sunlife.wis.servlets.WISServlet.doExec(WISServlet.java:107)
at sunlife.wis.servlets.WISServlet.doGet(WISServlet.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120) -
SWF Compilation Failed with "Submit All" Option
Hi,
I am using Captivate 6.1 and created a quiz with single choice questions. When I turn on the "Submit All" option, I can not preview/publish the file anymore. It says "SWF Compilation Failed." and I am advised to check if any user variables contain AS keywords. I am not using any user variables in this project. Whenever I turn the "Submit All" option off, preview/publish are possible again.
When publishing to HTML5, the error does not occur.
Can you please help me with this issue, since I would appreciate using the "Submit All" option.Hi
Check this forum : http://forums.adobe.com/thread/1111120?tstart=0
SWF compilation can come for following reasons:
1) If you use action script keywords in Captibvate project variables.
Resolution: Make sure you don't use action script keywords.
2) If you have invisible characters present in text fields.
Resolution: Don't Copy/Paste text from some other application to Captivate text fields like Project information etc. Type with key board. Create a blank project and publish, if you still get SWF compilation issue then your 64 bit JVM might be corrupted.
3) if your installation is 64 bit Captivate, 64 bit JVM might be corrupted.
Add Use32BitJVMForPublish = 1 in AdobeCaptivate.ini file
Close and Re-launch Captivate.
Re-publish the project
Captivate ini file is present at “C:\Program Files\Adobe\Adobe Captivate 6 x64” location
Thanks,
Vj -
Package compile faile with error ORA-03113: end-of-file on communication..
Hi There,
We're trying to compile a package and we're getting this error that we're not sure how to debug and/or tackle. Your assistance is highly appreciated.
create or replace
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 4252
Session ID: 1149 Serial number: 5910
The package use to compile without any issues; also we have it working in other environments. We can't see any differences at this stage.
Oracle Version:11.2.0.1 x64
OS: Windows 2008 Server R2
Thanks in advance for your help.
ThanksI have tried dropping the package and re-compiling it but to no avail. I can compile other packages/procedures/functions without any issues.
Also, trying to run either EXEC UTL_RECOMP.recomp_parallel(4, 'SCHEMA_NAME'); or @?/rdbms/admin/UTLRP.SQL gives the following erros:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 7040
Session ID: 388 Serial number: 9039
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE -
Manual Kernel Compilation fails with "Error: not a valid kernel..."
I wanted to try out the Zen kernel to compile my own custom kernel. The basic steps that I did were:
1. $ make localmodconfig
2. $ make -j3
3. # make modules_install
4. # cp -v ~/<build directory>/arch/x86_64/boot/bzImage /boot/vmlinuz-linux-zen-3.1.4.img
5. # mkinitcpio -k vmlinuz-linux-zen-3.1.4 -g /boot/initramfs-linux-zen-3.1.4
and I get the error:
==> ERROR: '/lib/modules/vmlinuz-linux-zen-3.1.4' is not a valid kernel module directory
Inside of /lib/modules I have a new files called "3.1.4-zen-ARCH-g30db333 (and the original files that were there from the stock kernel).
Inside of /boot/ I have the stock image and the stock initram as well as "vmlinuz-linux-zen-3.1.4.img"
Which step am I missing? Also, I was thinking it was possible to NOT use an initram if I just compiled the ext2 and ext4 (root is ext4) into the kernel instead of building them as modules. Is my thinking correct? Also, if anyone needs a reason why I'm using the zen sources instead of the nice Liquorix binary, the answer is simply that I wanted to mess around with it to satisfy my curiosity. Thanks.As per the man page:
-k kernelversion
Use kernelversion, instead of the current running kernel. This may be a path to a kernel image or a
specific kernel version. If specified as a path to an image, this will always be prefixed by the basedir.
You've picked... neither? I guess you want "/boot/vmlinuz-linux-zen-3.1.4.img" or "3.1.4-zen-ARCH-g30db333".
Compiling the filesystem module into the kernel alone is not sufficient to avoid using an initramfs. You also need, at a minimum, drivers for the disk controller and a block device driver.
Last edited by falconindy (2011-12-08 04:43:21) -
Applescript compile fails with "Expected end of line, etc. but found identifier"
Hi,
I've written my first applescript to move messages in Micorosoft Outlook to a specific folder. It is based on existing scripts I found on the internet. However my version keeps failing to compile with the error "Expected end of line, etc. but found identifier". I tried the exact same script on another Mac and it works. I created a very simple version of the script to show the error. All I am trying to do is get the current selected messages so I can move them:
on run {}
tell application "Microsoft Outlook"
set selectedMessages to current messages
end tell
end run
and I still get the same errors on the word "messages" above.
MAC is running OSX 10.9.4
Microsoft Outlook for Mac 2011 - version 14.4.3 (140616)
Since the script works on other computers the only thing I can assume is something wrong with the setup.
Any help is greatly appreciated.
- BenFrank Caggiano wrote:
twtwtw
Any reason that the parens would be needed on some cases and not in others? As you can see the code the OP posted compiled fine on my system with no need of the parens. Also the OP mentioned that the code did work on one machine but not another so I would assume again the parens were not needed in that case.
JUst curious
regards
Parentheses have the same function here as they do in mathematical equations. They are cues to the compiler about the order in which different parts of the statement should be processed. The problem here, I think, is that the word current is part of a lot of applescript nouns: current date, current application, current messages, current user, current track, current location, etc. That's exacerbated by the fact that message is also a noun in its own right in Outlook, creating an ambiguous bit of grammar. Applescript has to interpret the presence of that word in context, and several factors - different versions of the OS or of the relevant applications, the presence of different osaxen, runtime issues that alter how the Applescript system reads in the scriptability information - could affect how that interpretation plays out.
Context is (apparently) everything, sometimes. -
[Unsolved] Kernel linux 3.8.4-1 fails with fsck boot error on raid 0
The stock linux-3.8.4-1 (x86_64) fails to boot with the following unrecoverable error:
Loading ../initramfs-linix.img......ready.
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
Waiting 10 seconds for device /dev/md127 ...
:: performing fsck on '/dev/md127' ...
fsck.ext2: Invalid argument while trying to open /dev/md127
/dev/md127:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
ERROR: fsck failed on '/dev/md127'
:: mounting '/dev/md127' on real root
mount: you must specify the filesystem type
You are now being dropped into an emergancy shell.
sh. can't access tty; job control turned off
[rootfs /]#
My hooks are:
HOOKS="base udev autodetect modconf block mdadm_udev filesystems keyboard fsck"
I am however able to boot the linux-lts & my own custom kernels. Custom kernel is built from the abs linux package.
The / partition is on a raid 0 with an ext4 filesystem. fsck -f /dev/md127 comes back clean & the raid & two hard drives are healthy.
Last edited by straykat (2013-07-11 09:27:45)straykat wrote:
xanb,
For sanity to prevail, I am going to suggest the following:
Back up your data
Remove the RAIDs from your 2 linux hard drives. The Arch RAID wiki has instructions on this or (my prefered method) wipe your two linux drives with dd. If you are not sure on dd "Parted Magic" has a GUI for it.
Create a new partition table on both of your linux hard drives.
Partition your 2 linux hard drives as follows;
/dev/sdb1 as / (root) with ext4 fs
/dev/sdb2 as swap
/dev/sdc1 as /home with ext4 fs.
Reinstall Arch Linux on / (/dev/sdb1)
I would also recommend reading up in the Arch wiki, Kernel wiki etc on RAID & decide why you would use it on your system & which one would give you any benefit with your current hardware set up. Also learn more on how to create & maintain a RAID on an Arch system.
Keep in mind that KISS is always the way to go with any computer system as complexity will always increase the amount of mistakes & gotchas.
No. I don't want to behave as ostrich, hide the head ;-) This is my configuration, this is want I want. If archlinux fails, we have a bug. Another question is if the triage of the bug is difficult. No all bugs are good for triagging, but it's real life. If always we change the configuration, we will never detect new bugs.
Keep in mind that I don't want to blame, it's always "good force" comments.
Regards,
Xan. -
Perl 5.10 64bit compile fails with gccfss 4.2 on Solaris 10 (5/08) SPARC
Hi ,
I am having problems building my own perl 5.10 using the new GCCFSS 4.2 compiler running Soalris 10(5/08) on SUN T5120 server. I get pass configure but fails at make, below are my configure options and the make error msg. Any help would be appreciated and I have been working on this problem for hours.
Thanks,
Kaprino
sh Configure -Dcc="gcc -m64 -B/usr/ccs/bin/" -Dmake=/usr/css/bin/make -Dusethreads -Uuselargefiles -Duse64bitall -Dusesocks \
-Dprefix=/opt/perl-5.10.0 \
-Aldflags="-mcpu=v9 -m64" \
-Alddlflags="-mcpu=v9 -m64 -G" -des
#### Make Error message #####
SOCKSinit perl.o
ld: fatal: Symbol referencing errors. No output written to miniperl
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `miniperl'
Latest Compiler version
gcc -vUsing built-in specs.
Target: sparc-sun-solaris2.10
Configured with: /net/clpt-v490-1/export/data/bldmstr/20080102_phobos_gcc42/src/configure prefix=/usr/sfw enable-shared with-system-zlib enable-checking=release disable-libmudflap enable-languages=c,c++ enable-version-specific-runtime-libs with-cpu=v9 with-ld=/usr/ccs/bin/ld without-gnu-ld disable-gnattools with-mpfr=/ws/gccfss/tools --with-gmp=/ws/gccfss/tools
Thread model: posix
gcc version 4.2.0 (gccfss)Hi All,
Thanks for ur reply, but still im getting the below error
*** Error code 1
The following command caused the error:
test ! -f gcc/Makefile || exit 0; \
[ -d gcc ] || mkdir gcc; \
r=`${PWDCMD-pwd}`; export r; \
s=`cd .; ${PWDCMD-pwd}`; export s; \
CC="gcc"; export CC; \
CFLAGS="-g -O2"; export CFLAGS; \
CONFIG_SHELL="/bin/sh"; export CONFIG_SHELL; \
CXX="c++"; export CXX; \
CXXFLAGS="-g -O2"; export CXXFLAGS; \
TOPLEVEL_CONFIGURE_ARGUMENTS="configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=LIST --disable-libmudflap -enable-language=c,c++--enable-version-specific-runtime-libs --with-cpu=v9-m64-Aldflags=-mcpu=v9-m64-Alddlflags=-mcpu=v9-m64-G --with-ld=/usr/ccs/bin/ld --without-gnu-ld --disable-gnattools --with-mpfr=/ws/gccfss/tools --with-gmp=/ws/gccfss/tools"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
AR="ar"; export AR; \
AS="as"; export AS; \
CC_FOR_BUILD="gcc"; export CC_FOR_BUILD; \
DLLTOOL="dlltool"; export DLLTOOL; \
LD="/usr/ccs/bin/ld"; export LD; \
NM="nm"; export NM; \
RANLIB="ranlib"; export RANLIB; \
WINDRES="windres"; export WINDRES; \
OBJCOPY=""; export OBJCOPY; \
OBJDUMP=""; export OBJDUMP; \
SET_GCC_LIB_PATH_CMD="LD_LIBRARY_PATH=/dumps/gcc/gcc-3.4.6/gcc; export LD_LIBRARY_PATH;"; export SET_GCC_LIB_PATH_CMD; \
LD_LIBRARY_PATH=/dumps/gcc/gcc-3.4.6/gcc; export LD_LIBRARY_PATH; \
echo Configuring in gcc; \
cd gcc || exit 1; \
case . in \
srcdiroption="--srcdir=."; \
libsrcdir=".";; \
/* | [A-Za-z]:[\\/]*) \
srcdiroption="--srcdir=./gcc"; \
libsrcdir="$s/gcc";; \
srcdiroption="--srcdir=.././gcc"; \
libsrcdir="$s/gcc";; \
esac; \
/bin/sh ${libsrcdir}/configure \
cache-file=./config.cache build=sparc-sun-solaris2.10 host=sparc-sun-solaris2.10 target=sparc-sun-solaris2.10 prefix=/usr/sfw enable-shared with-system-zlib enable-checking=LIST disable-libmudflap -enable-language=c,c++enable-version-specific-runtime-libs with-cpu=v9-m64-Aldflags=-mcpu=v9-m64-Alddlflags=-mcpu=v9-m64-G with-ld=/usr/ccs/bin/ld without-gnu-ld disable-gnattools with-mpfr=/ws/gccfss/tools with-gmp=/ws/gccfss/tools with-gcc-version-trigger=/dumps/gcc/gcc-3.4.6/gcc/version.c program-transform-name='s,y,y,' ${srcdiroption} \
|| exit 1
make: Fatal error: Command failed for target `configure-gcc'
pls help me.
Regards,
Suresh.
Edited by: ssubrama on Mar 4, 2009 1:18 AM -
Compiling failed with "unrecognized command line option '-Wl'" error
Helllo,
I have here a fresh installation of Archlinux and I fall into troubles with compiling a few of applications from AUR.
The problem is this:
gcc: error: unrecognized command line option ‘-Wl’
It happens for example with bubblefishymod package from AUR. I've never seen this error.
Any suggestion, what is wrong, please?
I have 64bit Archlinux installation, intel core i5, base-devel package group is installed.Seems like a straightforward error message. Read about -Wl in "man gcc" if you want to know more.
In the meantime, removing "-Wl" from the LDFLAGS in the Makefile (I used a sed line in the PKGBUILD) should allow you to compile it successfully. Whether or not it works as expected though, is another matter entirely. Contact the author and get him to fix his Makefile. -
Procedure compilation failed with SQL command not properly ended error
Hi All,
Kindly help me to fix this.
I am compiling a procedure and getting an error. Procedure and error details are as follows:
Procedure:
CREATE or REPLACE PROCEDURE jiostore_new.auditReportCount (u_name IN VARCHAR2,stdate IN DATE,eddate IN DATE)
IS
BEGIN
DECLARE Total Number;
BEGIN
SELECT COUNT(am.id) into Total FROM auditMaster_ AS am INNER JOIN jioworld.deviceos_ dvos ON dvos.id=am.deviceOs WHERE am.updatedBy=u_name or am.updatedBy=ALL AND DATE(am.updatedDate)>=stdate OR DATE(am.updatedDate)='0000-00-00' AND DATE(am.updatedDate)<=eddate or DATE(am.updatedDate)='0000-00-00';
dbms_output.put_line('Total Count:' || Total);
END;
END;
Error:
Error(6,1): PL/SQL: SQL Statement ignored
Error(6,50): PL/SQL: ORA-00933: SQL command not properly ended
Regards,
Vishal G2922723 wrote:
Hi All,
Kindly help me to fix this.
I am compiling a procedure and getting an error. Procedure and error details are as follows:
Procedure:
CREATE or REPLACE PROCEDURE jiostore_new.auditReportCount (u_name IN VARCHAR2,stdate IN DATE,eddate IN DATE)
IS
BEGIN
DECLARE Total Number;
BEGIN
SELECT COUNT(am.id) into Total FROM auditMaster_ AS am INNER JOIN jioworld.deviceos_ dvos ON dvos.id=am.deviceOs WHERE am.updatedBy=u_name or am.updatedBy=ALL AND DATE(am.updatedDate)>=stdate OR DATE(am.updatedDate)='0000-00-00' AND DATE(am.updatedDate)<=eddate or DATE(am.updatedDate)='0000-00-00';
dbms_output.put_line('Total Count:' || Total);
END;
END;
Error:
Error(6,1): PL/SQL: SQL Statement ignored
Error(6,50): PL/SQL: ORA-00933: SQL command not properly ended
Regards,
Vishal G
The first thing, is that for your own sanity you should learn to format your code for readability. And for the sanity of those from whom you seek help, you should learn to preserve that formatting when you post to a forum:
CREATE OR REPLACE PROCEDURE jiostore_new.auditReportCount(
u_name IN VARCHAR2,
stdate IN DATE,
eddate IN DATE)
IS
BEGIN
DECLARE
Total NUMBER;
BEGIN
SELECT COUNT(am.id)
INTO Total
FROM auditMaster_ AS am
INNER JOIN jioworld.deviceos_ dvos
ON dvos.id =am.deviceOs
WHERE am.updatedBy =u_name
OR am.updatedBy =ALL
AND DATE(am.updatedDate)>=stdate
OR DATE(am.updatedDate) ='0000-00-00'
AND DATE(am.updatedDate)<=eddate
OR DATE(am.updatedDate) ='0000-00-00';
dbms_output.put_line('Total Count:' || Total);
END;
END;
What is the data type of am.updateDate? It appears to be a varchar being passed to a function named DATE to convert it to a DATEfor comparison to your input parameters, But you also compare it to strings.
Where are the variables 'u_name' and 'ALL'? (and what kind of a name is that for a variable -- 'ALL'?) -
FPGA Compilation fails with Xilinx "Block Memory Generator 8.1" configured with a Coefficient File
Hello All,
I have a SubVI that uses block memory, which has been created using Xilinx "Block Memory Generator 8.1". I have configured this block memory to be a "Single Port ROM", and I use a coefficient file to initialize the memory contents. In simulation mode, everything works as it should.
Next, when I try to compile the top-level VI, I get the following error:
http://www.cs.nyu.edu/~aditya/Compilation_Log_100.txt
http://www.cs.nyu.edu/~aditya/Dividing (This is the coefficient file)
Essentially, the compiler is looking at an ill-formed path to find the coefficient file.
My environment:
-- LabView 2014 f1 (32 Bit)
-- FPGA module 2014
-- RT Module 2014
-- Xilinx Vivado 2013.4
-- NI RIO Drivers 14
-- Development Machine and Conpile Server: Windows 7 Professional, 32GB RAM
-- Compile Worker running Linux, with Xilinx Compile tools installed
Is this a bug, or am I doing something wrong? Thanks!
Best,
AdityaNext, I tried compiling on the windows machine itself. And here is the error that I get. (See attached image).
Thanks!
best,
aditya
Attachments:
Capture.PNG 18 KB -
Hi,
I wrote an very small RMI program. It only demonstrate the function of rmi. But if I want to compile the necessery sources with the rmic-compiler, I get the follow output:
<cmd>
D:\Projekte\Eclipse\Arbeit\RmiTest>rmic de.lindcom.rmivoodoo.server.VoodooImpl
error: Class de.lindcom.rmivoodoo.server.VoodooImpl not found.
1 error
</cmd>
The class VoodooImpl:
package de.lindcom.rmivoodoo.server;
import java.rmi.RemoteException;
import java.rmi.server.UnicastRemoteObject;
import de.lindcom.rmivoodoo.rmi.Voodoo;
import de.lindcom.rmivoodoo.rmi.VoodooResponse;
public class VoodooImpl
extends UnicastRemoteObject
implements Voodoo {
private String spell;
protected VoodooImpl()
throws RemoteException {
public void setSpell(String spell)
throws RemoteException {
this.spell = spell;
public String getSpell()
throws RemoteException {
return spell;
public VoodooResponse doVoodoo()
throws RemoteException {
VoodooResponseImpl vri = new VoodooResponseImpl();
vri.setSpell(spell);
vri.setSuccess(true);
return vri;
}The project itself works on an other pc. Maybe some PATH-variables are wrong:
JAVA_HOME=C:\Programme\Java\jdk1.5.0_06
Path=C:\WINNT\system32;C:\WINNT;C:\Programme\Java\jdk1.5.0_06\bin
But these paths are correct. Where is the problem?!
Thanks for help
MichaelHi,
thanks. You're right. I added a dot to the classpath and it worked!
Gr��e
Michael -
CC 5.2 fails with "cannot open file /tmp/*ir*"
Hi,
compilation fails with an error message like
"Could not open file "/tmp/06710.TEMPLATE_FILE.ir"". The problem seems to be that the compiler once in a while is "leaking" these temp files (they seem to accumulate in /tmp over time) and the compiler cannot overwrite a different user's temp files. I am not sure if it matters, but all this is in a dmake context.
Why is CC generating these files in /tmp and not locally? Why doesn't it make them more unique e.g. 06710.user.TEMPLATE_FILE.ir? Is there a way to work around this problem?
Thanks.
philippextract the bundle and import the zip file enic-2.1.2.62-esx55-offline_bundle-2340678.zip to VUM
same for the fnic package
Maybe you are looking for
-
ORA-01704: string literal too long for CLOB colum
Hi, I'm trying to execute sql script containing a lot of insert into statements. Insert into table (clob_column) values ("value of 5500 characters"); I get the below error message. Please let me know how do resolve this issue without PL/SQL ? ORA-017
-
Bad intel graphics performance on nc10
hi there, i'm experiencing a stuttering flash video playback performance on my netbook and i remember that it used to be better. my specs: samsung nc10 netbook no xorg.conf, kms enabled, glxgears shows 100fps 00:00.0 Host bridge: Intel Corporation Mo
-
How can I use a Counter in a Card 6601 for several times in the same VI
When I try to use a Counter two times for read and for write, I get always a error (no. 50103). What should that mean.
-
Hi There, In SAP GRC 10.0, our team had an issue where we could not add duplicate fields from separate table (see ERROR: Select Currency/UoM field for the selected analyzed fields). This was resolved by the SAP Note 1904313/ 1904314 (http://service.s
-
To print transfer order and storage unit labels in lt31
Hi SAP Gurus 1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background 2>Is it pos