[Solved] Kernel 2.6.31 cannot find "modules.dep"

After upgrading to default x86_64 kernel 2.6.31-ARCH with no error messages, I get this during reboot:
"Could not load /lib/modules/2.6.30-ARCH/modules.dep"
Well, no wonder, as there is no 2.6.30-ARCH directory, only 2.6.31-ARCH. I have tried "mkinitcpio -p kernel26", but it didn't help any (naturally).
Is there an easy fix for this?
Last edited by whaler (2009-10-18 22:15:46)

Dieter@be wrote:Yes, if you have a separate filesystem for /boot, you should leave it uncommented in fstab and mounted when you install a new kernel (watch out with the 'noauto' mount option).  during package installation it will show a warning if you have /boot not mounted but I guess we both overlooked it.
It is not so surprising if I overlooked it... However, I cannot recall seeing such a warning? I am in the habit of copying both pacman's package install msgs and boot console msgs, but I don't think I have ever seen a warning about the /boot partition not being mounted.
Dieter@be wrote:It is remarkable however,  I don't remember ever having an issue like this, do you?  It looks to me like something changed, I looked at the sources for kernel26 but couldn't find anything special.
During the 18 months I have used Arch I have received a faulty kernel twice. On both occasions the problem was another than this /boot partition issue. I have never had the /boot partition uncommented in fstab while using Arch, so something must have changed, or there is a new bug in the kernel code somewhere. It is significant that this only appears with the 2.6.31 kernel.
I have EXT3 on my boot partition, and I use this ending in fstab "defaults 0 1". Is it safe?
BTW - with "vga=773 nomodeset" in GRUB, graphics, incl. MPlayer etc., seem to be back to normal - in fact better than before, as I am now getting full repaints in OOo Calc! Of course, since I am not into gaming, I don't know if there is some other functionality missing...
Thanks again, Dieter - I will mark this thread solved!

Similar Messages

  • Azure mobile services error cannot find module 'azure-storage'

    this is driving me nuts for past five days now and still no solution. After asking the questing at StackOverflow and azure-storage npm, I thought of now posting the same question here so that it reaches to more targeted 'microsoft azure' experts. 
    in my AzureMobileService, I am using azure-storage npm module in one of my custom API. I have been using this for past couple of months and it was all working great, I was very happy. Until last moday it started throwing the error - 'cannot find module
    'azure-storage'. It was strange, the code that was working till morning , started failing when I came back from work, with no change of a bit in the code. I get this error where I call 'require' for 'azure-module':
    var azure = require('azure-storage');
    var retryOperationFilter = new azure.ExponentialRetryPolicyFilter();
    var tableService= azure.createTableService().withFilter(retryOperationFilter);
    and in package.json, I have
    "dependencies": {"tracer": "0.7.3", "colors" : "1.0.3", "lodash" :"2.4.1", "azure-storage": "0.4.1"},
    Today, I also tried creating a new Mobile service from scratch in my azure account. Then I created the custom API and wrote the code again from scratch. Updated package.json to include azure-storage, updated my client code(HTML/JS) to use this new service
    URL etc. and tested again, everything worked fine till it reached the same line (require('azure-storage') ) and failed again there with
    same error.
    I am at my wits end. please help. 

    ok, got it working.
    I did an npm install 'azure-storage'  to my mobile service's service directory and then it started working. 
    As I remember reading, if I just include the npm module I want to use in my mobile service's package.json, it gets taken care, installed and I don't to install myself manually.
    And thats what has been happening when my code was working till last week. 
    Also, its feels odd because the other node modules I use - like tracer or lodash - work with no manual npm install. 
    anyways, its working for now, but now I am thinking about the azure mobile's reliability

  • BlankCordovaApp Error : Cannot find module 'q'

    Currently I'm using Visual Studio 2013 update 4 with Visual Studio Tools for Apache Cordova extension on Windows 8.1. I create a new Cordova JavaScript Blank project and then trigger a build, it turns out to be below building error:
    Error 2 Cannot find module 'q' C:\Users\penlv\documents\visual studio 2013\Projects\BlankCordovaApp1\BlankCordovaApp1\MDAVSCLI 1 1 BlankCordovaApp1
    Seems many other users run into the same issue. Any help on this? 

    Hi Penlv,
    Welcome to MSDN forum.
    Your issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    From the bottom of this document about Apache Corodva tool:http://blogs.msdn.com/b/visualstudio/archive/2014/11/13/tools-for-apache-cordova-update-ios-debugging-amp-windows-8-1-support.aspx,
    Microsoft announced the following statement:
    If you’ve already installed the tools and are actively using it, thank you! The improvements we prioritize are based largely on your feedback, so please don’t feel shy in contacting us via
    UserVoice, Twitter,
    StackOverflow, and email.
    So for your issue, I doubt something necessary is not installed or something is corrupt on your machine, I suggest consulting here:
    http://stackoverflow.com/questions/tagged/multi-device-hybrid-apps which discusses Multi-Device Hybrid applications and Apache Cordova issues.
    Thank you for your understanding,
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Kernel Panic!!! Can't find modules.dep

    Hello, everybody,
    Yesterday I followed the Kernel Compilation From Source topic on arch's wiki. So i did:
    wget -c http://kernel.org/pub/linux/kernel/v2.6 … 31.tar.bz2 (not 2.6.28)
    cp linux-2.6.31.tar.bz2 ~/kernelbuild/
    cd ~/kernelbuild
    tar -xvjf linux-2.6.31.tar.bz2
    cd ~/kernelbuild/linux-2.6.31
    make mrproper
    make menuconfig
    I didn't change nothing in menuconfig.
    So I created PKGBUILD and kernel26.install
    makepkg -c
    pacman -U kernel26-my-2.6.31.5-1-i686.pkg.tar.gz
    Everything with no problems. Except for one thing. When I did "pacman -U kernel26-my-2.6.31.5-1-i686.pkg.tar.gz" it returned conflicts with: vmlinuz26.img and *.map (I don't remember the names, the first it something like vmlinuz26.img but the second I only remember the extension *.map, I problably can remember if i see the names again). So I deleted these 2 files (I thought the new kernel would create these 2 files again).  After delete them, I runned again "pacman -U kernel26-my-2.6.31.5-1-i686.pkg.tar.gz", now with no erros. I restarted and BOOM!!!
    When I start appears the ERROR: could not load /lib/modules/2.6.31/modules.dep: file not found
    But I started from my Ubuntu and I can see modules.dep there. Maybe, it is searching in the /boot directory, instead the /
    What I must to do now? Is there a way to recover the old kernel? I think I made a backup. But I don't know how to access it, because my Ubuntu can't (only the owner can) and I don't how to use the live cd, because I know the Ubuntu-like live cd, but I can't find a live cd for Arch. So, is there a way to solve the problem? Please, reinstall Arch is the last option.
    ----------- EDIT ---------------
    Maybe I have to configure my bootloader (GRUB). But how do I do that?
    Last edited by igmx94 (2009-12-07 14:03:46)

    Gcool wrote:Have a read through this.
    Actually, turns out I was reading that when you posted.
    Here's where I'm stuck.
    After mounting proc, sys, and dev I did the mkinitcpio but now I receive:
    ERROR: '/lib/modules/3.0-ARCH/' is not a valid kernel module directory
    Which is accurate, because my /lib/modules is 3.3.4-1-ARCH. 
    So I checked for what could be setting that incorrectly with
    grep -r "3.0-ARCH"
    Only thing I found was in etc/mkinitcpio.d/exmple.preset
    But even in that file the line is commented out with #fallback_kver="3.0-ARCH".
    I didn't think I was using any defaults since I specify the -c command to mkinitcpio.
    Where is it getting this 3.0-ARCH kernel version from?

  • Modprobe can't find modules.dep

    Hi
    I lately compiled new kernel and I get this error during booting:
    modprobe: FATAL: Could not load /lib/modules/2.6.24-tuxonice-r9/modules.dep: No such file or directory
    modprobe: FATAL: Could not load /lib/modules/2.6.24-tuxonice-r9/modules.dep: No such file or directory
    despite file exist.
    After booting everything works fine. I try depmod -a and mkinitcpio -g /boot/kernelversion.img but still the same.
    How to get rid of this error?

    Gcool wrote:Have a read through this.
    Actually, turns out I was reading that when you posted.
    Here's where I'm stuck.
    After mounting proc, sys, and dev I did the mkinitcpio but now I receive:
    ERROR: '/lib/modules/3.0-ARCH/' is not a valid kernel module directory
    Which is accurate, because my /lib/modules is 3.3.4-1-ARCH. 
    So I checked for what could be setting that incorrectly with
    grep -r "3.0-ARCH"
    Only thing I found was in etc/mkinitcpio.d/exmple.preset
    But even in that file the line is commented out with #fallback_kver="3.0-ARCH".
    I didn't think I was using any defaults since I specify the -c command to mkinitcpio.
    Where is it getting this 3.0-ARCH kernel version from?

  • Mkinitcpio cannot find modules

    I had previously put this up to some kind of minor issue on my box, but now I'm not so certain.
    Since the 3.1 series of the 'linux' package, mkinitcpio has not been able to automatically build new boot images, as it always does when there's an update to the 'linux' package, and oftentimes it doesn't do it manually either.
    Previously, running 'depmod -a' would reveal this was because it was looking in a folder that did not exist, for a previous kernel version. Making a symlink to the folder provided by the new version of the 'linux' package's modules resolved this.
    However now, this workaround is no longer functioning. 'depmod -a' reveals absolutely nothing, and thus 'mkinitcpio -p linux' continues to fail to build the new boot images with the following output:
    ==> Building image from preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 3.2.1-1-ARCH
    ==> ERROR: module not found: `i915'
    -> Parsing hook: [base]
    -> Parsing hook: [udev]
    -> Parsing hook: [autodetect]
    -> Parsing hook: [pata]
    -> Parsing hook: [scsi]
    -> Parsing hook: [sata]
    -> Parsing hook: [filesystems]
    -> Parsing hook: [usbinput]
    -> Parsing hook: [keymap]
    ==> Creating xz initcpio image: /boot/initramfs-linux.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Image generation successful
    ==> Building image from preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 3.2.1-1-ARCH
    ==> ERROR: module not found: `i915'
    -> Parsing hook: [base]
    -> Parsing hook: [udev]
    -> Parsing hook: [pata]
    ==> ERROR: module not found: `pata_atp867x'
    ==> ERROR: module not found: `pata_opti'
    ==> ERROR: module not found: `pata_it821x'
    ==> ERROR: module not found: `pata_cmd64x'
    ==> ERROR: module not found: `pata_sis'
    ==> ERROR: module not found: `pata_ns87415'
    ==> ERROR: module not found: `pata_amd'
    ==> ERROR: module not found: `pata_sc1200'
    ==> ERROR: module not found: `pata_ninja32'
    ==> ERROR: module not found: `pata_it8213'
    ==> ERROR: module not found: `pata_rz1000'
    ==> ERROR: module not found: `pata_hpt3x3'
    ==> ERROR: module not found: `pata_efar'
    ==> ERROR: module not found: `pata_jmicron'
    ==> ERROR: module not found: `pata_cs5520'
    ==> ERROR: module not found: `pata_netcell'
    ==> ERROR: module not found: `pata_mpiix'
    ==> ERROR: module not found: `pata_cypress'
    ==> ERROR: module not found: `pata_cs5536'
    ==> ERROR: module not found: `pata_sl82c105'
    ==> ERROR: module not found: `pata_optidma'
    ==> ERROR: module not found: `pata_triflex'
    ==> ERROR: module not found: `pata_atiixp'
    ==> ERROR: module not found: `pata_oldpiix'
    ==> ERROR: module not found: `pata_pdc202xx_old'
    ==> ERROR: module not found: `pata_marvell'
    ==> ERROR: module not found: `pata_radisys'
    ==> ERROR: module not found: `pata_legacy'
    ==> ERROR: module not found: `pata_cs5530'
    ==> ERROR: module not found: `pata_hpt3x2n'
    ==> ERROR: module not found: `pata_pdc2027x'
    ==> ERROR: module not found: `pata_sch'
    ==> ERROR: module not found: `pata_sil680'
    ==> ERROR: module not found: `pata_artop'
    ==> ERROR: module not found: `pata_via'
    ==> ERROR: module not found: `pata_rdc'
    ==> ERROR: module not found: `pata_hpt37x'
    ==> ERROR: module not found: `pata_ali'
    ==> ERROR: module not found: `pata_serverworks'
    ==> ERROR: module not found: `pata_piccolo'
    ==> ERROR: module not found: `pata_ns87410'
    ==> ERROR: module not found: `pata_cmd640'
    ==> ERROR: module not found: `pata_pcmcia'
    ==> ERROR: module not found: `pata_hpt366'
    ==> ERROR: module not found: `pata_acpi'
    ==> ERROR: module not found: `pata_arasan_cf'
    ==> ERROR: module not found: `ata_generic'
    ==> ERROR: module not found: `ata_piix'
    -> Parsing hook: [scsi]
    -> Parsing hook: [sata]
    -> Parsing hook: [filesystems]
    -> Parsing hook: [usbinput]
    -> Parsing hook: [keymap]
    ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Image generation successful
    Past experience has taught me that neither of these two images will be bootable, because previous versions displaying the same output were also unbootable.
    Contents of the /lib/modules directory, as reported by 'ls -l'
    drwxr-xr-x 2 root root 4096 Jan 19 17:52 3.1.9-2-ARCH
    drwxr-xr-x 3 root root 4096 Jan 13 05:54 3.2.1-1-ARCH
    drwxr-xr-x 2 root root 4096 Jan 19 17:35 extramodules-3.2-ARCH
    I cannot see the cause nor solution to this problem. Any help?

    @wonder: pata removed. Problem remains unchanged.
    @karol
    I am not using [testing].
    Requested file contents:
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES="i915"
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata filesystems usbinput keymap"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""

  • [SOLVED] After pacman glibc update, cannot find command bash?

    A few days ago I ran into a problem after running pacman -Syu that ended up with an unbootable system.  I found this topic that ultimately solved the kernel panic-
    https://bbs.archlinux.org/viewtopic.php … 1#p1127251
    All that was needed was a symlink "/lib" to point to "/usr/lib"
    My system now almost boots but luckily I can now get a to a shell (zsh).  The problem is that I can not run bash, and various other tools- including my desktop environment and pacman.
    I have checked my $path, and have verified that I have the binary file "/usr/bin/bash" and a symlink in /bin/bash to point to that binary file, which does exist...
    % ls -l /bin/bash
    lrwxrwxrwx 1 root root 13 May 24 23:43 /bin/bash -> /usr/bin/bash
    % ls -l /usr/bin/bash
    -rwxr-xr-x 1 root root 738008 Mar 13 00:47 /usr/bin/bash
    But when I try to start a bash shell or run a script
    % bash
    zsh: command not found: bash
    % pacman
    zsh: command not found: pacman
    % /usr/bin/bash
    zsh: no such file or directory /usr/bin/bash
    % cat test.sh
    #!/bin/bash
    echo "Hello World"
    % ./test.sh
    zsh: ./test.sh: bad interpreter: /bin/bash: no such file or directory
    I hope i was thorough enough in providing information about my system, but please let me know if there's anything else I left out that may be able to help.
    Thanks so much!
    [SOLVED]-  Ended up mounting my system from a live install cd, and copying over each bash binary in my system with the live media's binary.
    Last edited by OrangeCrush (2013-05-25 06:38:43)

    If it has only been a few months, that thread should have nothing to do with what you are experiencing.  That problem stemmed from when the filesystem was actually changed from having /lib as an actual directory to /lib as a symlink to /usr/lib.  Oh the problems that caused.  For me it went perfectly smooth... well I did have to search for and rid /lib of extraneous unowned files, but it was smooth after that.
    You say though that you did not have a /lib symlink when you checked, and then you created it?  This is odd, as that is part of the filesystem package and therefore a tracked file.  Maybe you should start by reinstalling the filesystem package just to make sure that the necessary components of the filesystem are all in order before proceeeding.
    BTW, you should really update more often than every "few months" as that is what using a rolling release is all about.  Also if you don't update very often still, never update the database (-Sy) without also updating the system (-Syu) as this will lead to partial upgrades, which can severly break your system.  So never do "pacman -Sy <package>" as that is the equivalent of doing just a "pacman -Sy" and then continuing on your merry way.  Big changes are in the air right now around these parts, so keeping your system up to date is probably going to be crucial in making subsequent updates as pain free as possible (we are heading towards the final /bin -> /usr/bin move!).

  • [SOLVED] Installing mod_jk through Aurbuild - Cannot find...

    OLD TOPIC TITLE: Tomcat + mod_jk + Apache2  - need help!
    Hi everyone,
    I've been trying to install mod_jk but cannot get it compiled (compiling finishes fine but then there is no mod_jk.so file.. got me stumbled..). Annyway, I found a wiki for it on the ArchWiki (http://wiki.archlinux.org/index.php/Tomcat_and_Apache), but the download link is dead, and since the only thing I really need is the compiled "mod_jk.so", that's a pretty big problem. Could someone provide me with 'jk2-2.0.2.tar.bz2'? I can get the other file ('tomcat-4.1.27-1.tar.gz') from the net easily, but googling for the jk2 file doesn't show any results other than the ArchWiki page refering to it..
    I really need this for my school project so any help would be greatly appreciated!
    Thanks in advance,
    Target

    Hi mpie,
    I greatly appreciate it that you take the time and effort to help me out here! I looked at the commands you where doing in the pkgbuild and tried some allready, I downloaded the source, extracted it and ran the commands as specified in the pkgbuild, the output:
    (only errors)
    appending configuration tag "F77" to libtool
    checking for test... /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin
    checking for rm... /bin/rm
    checking for grep... /bin/grep
    checking for echo... /bin/echo
    checking for sed... /bin/sed
    checking for cp... /bin/cp
    checking for mkdir... /bin/mkdir
    checking for uint32_t... yes
    checking size of uint32_t... 4
    checking for u_int32_t... yes
    checking size of u_int32_t... 4
    checking for unsigned long... yes
    checking size of unsigned long... 4
    checking for unsigned int... yes
    checking size of unsigned int... 4
    checking for unsigned long long... yes
    checking size of unsigned long long... 8
    checking for unsigned longlong... no
    checking size of unsigned longlong... 0
    checking for snprintf... yes
    checking for vsnprintf... yes
    checking for flock... yes
    checking for setsockopt in -lsocket... no
    checking whether to use SO_RCVTIMEO with setsockopt()... yes
    checking whether to use SO_SNDTIMEO with setsockopt()... yes
    ./configure: line 22428: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    checking for target platform... unix
    no apache given
    ./configure: line 22749: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    ./configure: line 22752: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    ./configure: line 22759: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    ./configure: line 22954: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    ./configure: line 22966: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    ./configure: line 22975: /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/opt/gnome/bin:/opt/java/jre/bin:/opt/java/bin:/opt/qt/bin: No such file or directory
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating apache-1.3/Makefile
    config.status: creating apache-1.3/Makefile.apxs
    config.status: creating apache-2.0/Makefile
    config.status: creating apache-2.0/Makefile.apxs
    config.status: creating common/Makefile
    config.status: creating common/list.mk
    config.status: creating jni/Makefile
    config.status: creating common/portable.h
    config.status: executing depfiles commands
    I dont think the pkgbuild can fix those errors, what do you think? I looked through the configure script at the lines that the error messages state, but I don't see anything obviously wrong there. I've also met all the requirements for installing mod_jk as far as I know. echo $? after running ./configure shows a '0' too, so I'm not too sure if those errors are that serious.. After running a 'make' though (it does work for pretty long..) it doesn't show any errors, but there is no mod_jk.so in apache-2.0 directory. Also, after running make the exit code is still 0, so I don't think it has an error anywhere.
    Any hints on what might cause these errors would be greatly appreciated!
    I've attached the full output of the configure command and the make command:
    http://tempz0ne.homelinux.com/configure-output.txt
    http://tempz0ne.homelinux.com/make-output.txt

  • 2.6.37 trys to find module.dep in /lib/modules/2.6.36-ARCH

    and obviously fails.
    what went wrong?

    crazy thing
    I found out the problem.
    I have 2 Sata-Drives, root is on the second while on the first is a clone of root. Now here is the strange thing: In bios I declare the second sata as first in boot sequence. This makes grub think it is (hd0,0) it seams. As i have root=(hd1,0) grub read the kernelimages from the clone (it seams). Than  later in the bootprocess the kernel itself looks at the right place, but as the image loaded is 2.6.36 it doesn't find the correct modules.
    Now I changed in menu.lst the line to "root   (hd0,0)" it succesfully boots from SDB1!!!!!!!
    I have to apologize as it was a grub-thing, but nobody can expect such a strange behaviour from grub
    Last edited by capoeira (2011-01-31 16:46:35)

  • Fireforx cannot find web page when the page address is correct

    How do I solve the message that Firefox cannot find the page when the page address is correct?

    Do you want to do a Google search instead?
    You can check the <b>keyword.enabled</b> on the <b>about:config</b> page and if necessary then you can toggle this pref to true via a double-click.
    *https://support.mozilla.org/kb/Location+bar+search
    See also:
    *http://kb.mozillazine.org/Error_loading_websites

  • Xorg cannot find screens with nvidia module

    I know that this question is very common, but I cannot find solution,
    I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
    Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
    Thanks.
    lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
    xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    # Screen 0 "Screen1" 0 0
    # Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "VideoKey" # <i>
    #Option "FlatPanel" # [<bool>]
    #Option "FPDither" # [<bool>]
    #Option "CrtcNumber" # <i>
    #Option "FPScale" # [<bool>]
    #Option "FPTweak" # <i>
    #Option "DualHead" # [<bool>]
    Identifier "Card0"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "Backlight" # <str>
    #Option "DRI" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "VideoKey" # <i>
    #Option "Tiling" # [<bool>]
    #Option "LinearFramebuffer" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    #Option "XvPreferOverlay" # [<bool>]
    #Option "HotPlug" # [<bool>]
    #Option "RelaxedFencing" # [<bool>]
    #Option "XvMC" # [<bool>]
    #Option "Throttle" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "DelayedFlush" # [<bool>]
    #Option "TearFree" # [<bool>]
    #Option "PerCrtcPixmaps" # [<bool>]
    #Option "FallbackDebug" # [<bool>]
    #Option "DebugFlushBatches" # [<bool>]
    #Option "DebugFlushCaches" # [<bool>]
    #Option "DebugWait" # [<bool>]
    #Option "BufferCache" # [<bool>]
    #Option "TripleBuffer" # [<bool>]
    Identifier "Card1"
    Driver "intel"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1366x768"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1366x768"
    EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 32
    # Modes "1366x768"
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1366x768"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1366x768"
    EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 32
    # Modes "1366x768"
    # EndSubSection
    EndSection
    Xorg.0.log:
    [ 27.732]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 27.732] X Protocol Version 11, Revision 0
    [ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
    [ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
    [ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 27.732] Build Date: 19 October 2012 03:54:56PM
    [ 27.732]
    [ 27.732] Current version of pixman: 0.26.2
    [ 27.732] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
    [ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
    [ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 27.732] (==) ServerLayout "X.org Configured"
    [ 27.732] (**) |-->Screen "Screen0" (0)
    [ 27.732] (**) | |-->Monitor "Monitor0"
    [ 27.732] (**) | |-->Device "Card0"
    [ 27.732] (**) |-->Input Device "Mouse0"
    [ 27.733] (**) |-->Input Device "Keyboard0"
    [ 27.733] (==) Automatically adding devices
    [ 27.733] (==) Automatically enabling devices
    [ 27.733] (==) Automatically adding GPU devices
    [ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 27.733] Entry deleted from font path.
    [ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 27.733] Entry deleted from font path.
    [ 27.733] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 27.733] (WW) Disabling Mouse0
    [ 27.733] (WW) Disabling Keyboard0
    [ 27.733] (II) Loader magic: 0x7fcc20
    [ 27.733] (II) Module ABI versions:
    [ 27.733] X.Org ANSI C Emulation: 0.4
    [ 27.733] X.Org Video Driver: 13.0
    [ 27.733] X.Org XInput driver : 18.0
    [ 27.733] X.Org Server Extension : 7.0
    [ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
    [ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 27.734] Initializing built-in extension Generic Event Extension
    [ 27.734] Initializing built-in extension SHAPE
    [ 27.734] Initializing built-in extension MIT-SHM
    [ 27.734] Initializing built-in extension XInputExtension
    [ 27.734] Initializing built-in extension XTEST
    [ 27.734] Initializing built-in extension BIG-REQUESTS
    [ 27.734] Initializing built-in extension SYNC
    [ 27.734] Initializing built-in extension XKEYBOARD
    [ 27.734] Initializing built-in extension XC-MISC
    [ 27.734] Initializing built-in extension SECURITY
    [ 27.734] Initializing built-in extension XINERAMA
    [ 27.734] Initializing built-in extension XFIXES
    [ 27.734] Initializing built-in extension RENDER
    [ 27.734] Initializing built-in extension RANDR
    [ 27.734] Initializing built-in extension COMPOSITE
    [ 27.734] Initializing built-in extension DAMAGE
    [ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
    [ 27.734] Initializing built-in extension DOUBLE-BUFFER
    [ 27.734] Initializing built-in extension RECORD
    [ 27.734] Initializing built-in extension DPMS
    [ 27.735] Initializing built-in extension X-Resource
    [ 27.735] Initializing built-in extension XVideo
    [ 27.735] Initializing built-in extension XVideo-MotionCompensation
    [ 27.735] Initializing built-in extension XFree86-VidModeExtension
    [ 27.735] Initializing built-in extension XFree86-DGA
    [ 27.735] Initializing built-in extension XFree86-DRI
    [ 27.735] Initializing built-in extension DRI2
    [ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 27.735] (II) LoadModule: "glx"
    [ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
    [ 27.741] compiled for 4.0.2, module version = 1.0.0
    [ 27.741] Module class: X.Org Server Extension
    [ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
    [ 27.741] Loading extension GLX
    [ 27.741] (II) LoadModule: "nvidia"
    [ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.742] compiled for 4.0.2, module version = 1.0.0
    [ 27.742] Module class: X.Org Video Driver
    [ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
    [ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
    [ 27.815] (II) UnloadModule: "nvidia"
    [ 27.815] (II) Unloading nvidia
    [ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
    [ 27.815] (EE) No drivers available.
    [ 27.815]
    Fatal server error:
    [ 27.815] no screens found
    [ 27.815] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 27.815] (EE)
    dmesg.log
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
    [ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
    [ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
    [ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000bafbb000 00040
    [ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
    [ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
    [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
    [ 0.000000] On node 0 totalpages: 1023564
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4056 pages used for memmap
    [ 0.000000] Normal zone: 255528 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
    [ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
    [ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
    [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
    [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
    [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
    [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2494.278 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000025] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001662] Mount-cache hash table entries: 256
    [ 0.001817] Initializing cgroup subsys cpuacct
    [ 0.001818] Initializing cgroup subsys memory
    [ 0.001825] Initializing cgroup subsys devices
    [ 0.001826] Initializing cgroup subsys freezer
    [ 0.001827] Initializing cgroup subsys net_cls
    [ 0.001828] Initializing cgroup subsys blkio
    [ 0.001850] CPU: Physical Processor ID: 0
    [ 0.001850] CPU: Processor Core ID: 0
    [ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002211] mce: CPU supports 7 MCE banks
    [ 0.002221] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002227] using mwait in idle threads.
    [ 0.003141] ACPI: Core revision 20120320
    [ 0.021624] ftrace: allocating 18032 entries in 71 pages
    [ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
    [ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.166800] ... version: 3
    [ 0.166801] ... bit width: 48
    [ 0.166802] ... generic registers: 4
    [ 0.166803] ... value mask: 0000ffffffffffff
    [ 0.166804] ... max period: 000000007fffffff
    [ 0.166804] ... fixed-purpose events: 3
    [ 0.166805] ... event mask: 000000070000000f
    [ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.200098] Booting Node 0, Processors #1 #2 #3
    [ 0.266902] Brought up 4 CPUs
    [ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
    [ 0.269981] devtmpfs: initialized
    [ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
    [ 0.271536] NET: Registered protocol family 16
    [ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.271637] ACPI: bus type pci registered
    [ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.277539] PCI: Using configuration type 1 for base access
    [ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.277666] mtrr: corrected configuration.
    [ 0.277952] bio: create slab <bio-0> at 0
    [ 0.277994] ACPI: Added _OSI(Module Device)
    [ 0.277995] ACPI: Added _OSI(Processor Device)
    [ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.279372] ACPI: EC: Look up EC in DSDT
    [ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.284681] ACPI: Dynamic OEM Table Load:
    [ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.285275] ACPI: Dynamic OEM Table Load:
    [ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.285725] ACPI: Dynamic OEM Table Load:
    [ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.286579] ACPI: Interpreter enabled
    [ 0.286581] ACPI: (supports S0 S3 S4 S5)
    [ 0.286600] ACPI: Using IOAPIC for interrupt routing
    [ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.409424] ACPI: No dock devices found.
    [ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.409682] \_SB_.PCI0:_OSC invalid UUID
    [ 0.409683] _OSC request data:1 8 1f
    [ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
    [ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
    [ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
    [ 0.410117] PCI host bridge to bus 0000:00
    [ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
    [ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
    [ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
    [ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
    [ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
    [ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
    [ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
    [ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
    [ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
    [ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
    [ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
    [ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
    [ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
    [ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
    [ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
    [ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
    [ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
    [ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
    [ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
    [ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
    [ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
    [ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
    [ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
    [ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
    [ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
    [ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
    [ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
    [ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
    [ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
    [ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
    [ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
    [ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
    [ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
    [ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
    [ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
    [ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
    [ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
    [ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
    [ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
    [ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
    [ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
    [ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
    [ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
    [ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
    [ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
    [ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
    [ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
    [ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
    [ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
    [ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
    [ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
    [ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
    [ 0.426744] pci 0000:03:00.0: >supports D1
    [ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
    [ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
    [ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.433378] \_SB_.PCI0:_OSC invalid UUID
    [ 0.433379] _OSC request data:1 1f 1f
    [ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
    [ 0.433416] \_SB_.PCI0:_OSC invalid UUID
    [ 0.433417] _OSC request data:1 0 1d
    [ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.435952] vgaarb: loaded
    [ 0.435953] vgaarb: bridge control possible 0000:01:00.0
    [ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.435977] PCI: Using ACPI for IRQ routing
    [ 0.437526] PCI: pci_cache_line_size set to 64 bytes
    [ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
    [ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    [ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
    [ 0.437671] NetLabel: Initializing
    [ 0.437672] NetLabel: domain hash size = 128
    [ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.437681] NetLabel: unlabeled traffic allowed by default
    [ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.439709] Switching to clocksource hpet
    [ 0.443743] pnp: PnP ACPI init
    [ 0.443758] ACPI: bus type pnp registered
    [ 0.444001] pnp 00:00: >[bus 00-3e]
    [ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
    [ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
    [ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
    [ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
    [ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
    [ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
    [ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
    [ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
    [ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
    [ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
    [ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
    [ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
    [ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
    [ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
    [ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
    [ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
    [ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
    [ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
    [ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
    [ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
    [ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
    [ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
    [ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
    [ 0.444099] pnp 00:01: >[dma 4]
    [ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
    [ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
    [ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.444214] pnp 00:04: >[io 0x00f0]
    [ 0.444222] pnp 00:04: >[irq 13]
    [ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
    [ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
    [ 0.444248] pnp 00:05: >[io 0x0061]
    [ 0.444249] pnp 00:05: >[io 0x0063]
    [ 0.444251] pnp 00:05: >[io 0x0065]
    [ 0.444252] pnp 00:05: >[io 0x0067]
    [ 0.444253] pnp 00:05: >[io 0x0070]
    [ 0.444254] pnp 00:05: >[io 0x0080]
    [ 0.444255] pnp 00:05: >[io 0x0092]
    [ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
    [ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
    [ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
    [ 0.444260] pnp 00:05: >[io 0xffff]
    [ 0.444261] pnp 00:05: >[io 0xffff]
    [ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
    [ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
    [ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
    [ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
    [ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
    [ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
    [ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
    [ 0.444303] system 00:05: >[io 0xffff] has been reserved
    [ 0.444305] system 00:05: >[io 0xffff] has been reserved
    [ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
    [ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
    [ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
    [ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
    [ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
    [ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
    [ 0.444327] pnp 00:06: >[irq 8]
    [ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
    [ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
    [ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.444394] pnp 00:08: >[io 0x0060]
    [ 0.444396] pnp 00:08: >[io 0x0064]
    [ 0.444400] pnp 00:08: >[irq 1]
    [ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.444460] pnp 00:09: >[irq 12]
    [ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
    [ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
    [ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
    [ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
    [ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
    [ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
    [ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
    [ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
    [ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
    [ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
    [ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
    [ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
    [ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
    [ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
    [ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
    [ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
    [ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
    [ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
    [ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.503484] pnp: PnP ACPI: found 12 devices
    [ 0.503485] ACPI: ACPI bus type pnp unregistered
    [ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
    [ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
    [ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
    [ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
    [ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
    [ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
    [ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
    [ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
    [ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
    [ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
    [ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
    [ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
    [ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
    [ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
    [ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
    [ 0.509849] NET: Registered protocol family 2
    [ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.512123] TCP: reno registered
    [ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.512215] NET: Registered protocol family 1
    [ 0.512227] pci 0000:00:02.0: >Boot video device
    [ 0.539686] PCI: CLS 64 bytes, default 64
    [ 0.539720] Unpacking initramfs...
    [ 0.587463] Freeing initrd memory: 3004k freed
    [ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
    [ 0.587808] Simple Boot Flag at 0x44 set to 0x1
    [ 0.588188] audit: initializing netlink socket (disabled)
    [ 0.588201] type=2000 audit(1351239412.473:1): initialized
    [ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.599469] VFS: Disk quotas dquot_6.5.2
    [ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.599601] msgmni has been set to 7715
    [ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.599785] io scheduler noop registered
    [ 0.599786] io scheduler deadline registered
    [ 0.599824] io scheduler cfq registered (default)
    [ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
    [ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.600059] vesafb: scrolling: redraw
    [ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
    [ 0.667429] Console: switching to colour frame buffer device 170x48
    [ 0.734140] fb0: VESA VGA frame buffer device
    [ 0.734147] intel_idle: does not run on family 6 model 58
    [ 0.734170] GHES: HEST is not enabled!
    [ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.734579] Linux agpgart interface v0.103
    [ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
    [ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.748663] mousedev: PS/2 mouse device common for all mice
    [ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
    [ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
    [ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.748868] cpuidle: using governor ladder
    [ 0.748870] cpuidle: using governor menu
    [ 0.748966] drop_monitor: Initializing network drop monitor service
    [ 0.749023] TCP: cubic registered
    [ 0.749094] NET: Registered protocol family 10
    [ 0.749220] NET: Registered protocol family 17
    [ 0.749227] Key type dns_resolver registered
    [ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
    [ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.775385] PM: Hibernation image not present or could not be loaded.
    [ 0.775393] registered taskstats version 1
    [ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
    [ 0.776874] Freeing unused kernel memory: 760k freed
    [ 0.776957] Write protecting the kernel read-only data: 8192k
    [ 0.780137] Freeing unused kernel memory: 1472k freed
    [ 0.781606] Freeing unused kernel memory: 608k freed
    [ 0.787240] systemd-udevd[47]: starting version 194
    [ 0.813888] ACPI: bus type usb registered
    [ 0.813910] usbcore: registered new interface driver usbfs
    [ 0.813918] usbcore: registered new interface driver hub
    [ 0.813955] usbcore: registered new device driver usb
    [ 0.815211] SCSI subsystem initialized
    [ 0.816356] libata version 3.00 loaded.
    [ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
    [ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
    [ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
    [ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
    [ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
    [ 0.816791] xHCI xhci_add_endpoint called for root hub
    [ 0.816793] xHCI xhci_check_bandwidth called for root hub
    [ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.816904] hub 1-0:1.0: >USB hub found
    [ 0.816914] hub 1-0:1.0: >4 ports detected
    [ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
    [ 0.817469] xHCI xhci_add_endpoint called for root hub
    [ 0.817471] xHCI xhci_check_bandwidth called for root hub
    [ 0.817493] hub 2-0:1.0: >USB hub found
    [ 0.817500] hub 2-0:1.0: >4 ports detected
    [ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
    [ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
    [ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
    [ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
    [ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
    [ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
    [ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
    [ 0.836049] hub 3-0:1.0: >USB hub found
    [ 0.836052] hub 3-0:1.0: >2 ports detected
    [ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
    [ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
    [ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
    [ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
    [ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
    [ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
    [ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
    [ 0.849353] hub 4-0:1.0: >USB hub found
    [ 0.849356] hub 4-0:1.0: >2 ports detected
    [ 0.849406] ahci 0000:00:1f.2: >version 3.0
    [ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
    [ 0.849524] ahci: SSS flag set, parallel bus scan disabled
    [ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
    [ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
    [ 0.869649] scsi0 : ahci
    [ 0.869722] scsi1 : ahci
    [ 0.869780] scsi2 : ahci
    [ 0.869834] scsi3 : ahci
    [ 0.869889] scsi4 : ahci
    [ 0.869943] scsi5 : ahci
    [ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
    [ 0.870011] ata2: DUMMY
    [ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
    [ 0.870015] ata4: DUMMY
    [ 0.870016] ata5: DUMMY
    [ 0.870016] ata6: DUMMY
    [ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
    [ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
    [ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.244122] ata1.00: configured for UDMA/100
    [ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
    [ 1.265963] hub 3-1:1.0: >USB hub found
    [ 1.266053] hub 3-1:1.0: >6 ports detected
    [ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
    [ 1.495531] hub 4-1:1.0: >USB hub found
    [ 1.495628] hub 4-1:1.0: >6 ports detected
    [ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
    [ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
    [ 1.567395] ata3.00: configured for UDMA/100
    [ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
    [ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
    [ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
    [ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
    [ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
    [ 1.588300] Switching to clocksource tsc
    [ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
    [ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
    [ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
    [ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
    [ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.297029] systemd-udevd[165]: starting version 194
    [ 6.879435] ACPI: Requesting acpi_cpufreq
    [ 6.901533] Monitor-Mwait will be used to enter C-1 state
    [ 6.901538] Monitor-Mwait will be used to enter C-2 state
    [ 6.901542] ACPI: acpi_idle registered with cpuidle
    [ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
    [ 7.242428] ACPI: Power Button [PWRB]
    [ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
    [ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
    [ 7.243227] ACPI: Sleep Button [SLPB]
    [ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 7.243282] ACPI: Lid Switch [LID0]
    [ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 7.243314] ACPI: Power Button [PWRF]
    [ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
    [ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
    [ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
    [ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
    [ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
    [ 7.648436] Backport based on linux-stable.git v3.6-rc6
    [ 7.648436] compat.git: linux-stable.git
    [ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
    [ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
    [ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
    [ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
    [ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
    [ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
    [ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
    [ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
    [ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
    [ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
    [ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
    [ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
    [ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
    [ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
    [ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
    [ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
    [ 7.975824] alx: Atheros Gigabit Network Connection
    [ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
    [ 8.008080] [drm] Initialized drm 1.1.0 20060810
    [ 8.066122] iTCO_vendor_support: vendor-support=0
    [ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
    [ 8.080898] usbcore: registered new interface driver rts5139
    [ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.188460] Linux media interface: v0.10
    [ 8.307532] Linux video capture interface: v2.00
    [ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
    [ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
    [ 8.339707] usbcore: registered new interface driver uvcvideo
    [ 8.339708] USB Video Class driver (1.1.1)
    [ 8.477762] Bluetooth: Core ver 2.16
    [ 8.477776] NET: Registered protocol family 31
    [ 8.477777] Bluetooth: HCI device and connection manager initialized
    [ 8.477779] Bluetooth: HCI socket layer initialized
    [ 8.477780] Bluetooth: L2CAP socket layer initialized
    [ 8.477784] Bluetooth: SCO socket layer initialized
    [ 8.491954] usbcore: registered new interface driver btusb
    [ 8.639211] hda_codec: CX20590: BIOS auto-probing.
    [ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
    [ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
    [ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
    [ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 8.710502] Console: switching to colour dummy device 80x25
    [ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
    [ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
    [ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 8.744491] [drm] Driver supports precise vblank timestamp query.
    [ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
    [ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
    [ 9.132101] nvidia: disagrees about version of symbol module_layout
    [ 9.243757] usbcore: registered new interface driver ath3k
    [ 9.265032] usb 3-1.3: >USB disconnect, device number 3
    [ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
    [ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 9.400084] ath: EEPROM regdomain: 0x65
    [ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
    [ 9.400087] ath: Country alpha2 being used: 00
    [ 9.400088] ath: Regpair used: 0x65
    [ 9.421060] fbcon: inteldrmfb (fb0) is primary device
    [ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
    [ 9.487781] Registered led device: ath9k-phy0
    [ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
    [ 9.552614] kvm: disabled by bios
    [ 9.556577] kvm: disabled by bios
    [ 9.601270] Console: switching to colour frame buffer device 170x48
    [ 9.602975] fb0: inteldrmfb frame buffer device
    [ 9.602976] drm: registered panic notifier
    [ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 9.605310] acpi device:38: >registered as cooling_device4
    [ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
    [ 9.611483] acpi device:44: >registered as cooling_device5
    [ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
    [ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
    [ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
    [ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
    [ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 12.321742] fuse init (API version 7.19)
    [ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
    I'm sorry for my English.
    Last edited by Kot Dymok (2012-10-26 08:29:53)

    I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
    You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
    Last edited by Lekensteyn (2012-10-29 14:52:55)

  • [SOLVED] Cannot compile wallet, cannot find boost

    Hello,
    When I'm trying to compile piggybank to store my CENT cryptocurrency, I get this error when compiling:
    robin-desktop% make
    cd /home/robin/Downloads/pennies-master; /bin/sh share/genbuild.sh /home/robin/Downloads/pennies-master/build/build.h
    fatal: Not a git repository (or any parent up to mount point /home)
    Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
    /usr/lib/qt4/bin/rcc -name bitcoin src/qt/bitcoin.qrc -o qrc_bitcoin.cpp
    g++ -c -pipe -fstack-protector-all --param ssp-buffer-size=1 -msse2 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_REENTRANT -fdiagnostics-show-option -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -Wstack-protector -DQT_GUI -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -DSCRYPT_CHACHA -DSCRYPT_KECCAK512 -DBOOST_THREAD_PROVIDES_GENERIC_SHARED_MUTEX_ON_WIN -D__NO_SYSTEM_INCLUDES -DUSE_UPNP=1 -DSTATICLIB -DUSE_IPV6=1 -DHAVE_BUILD_INFO -DLINUX -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -Isrc -Isrc/json -Isrc/qt -Ic:/deps -IC:/deps/boost -Ic:/deps/db/build_unix -Ic:/deps/ssl/include -Ibuild -Ibuild -o build/qrc_bitcoin.o qrc_bitcoin.cpp
    g++ -Wl,-O1,--sort-common,--as-needed,-z,relro -fstack-protector-all --param ssp-buffer-size=1 -Wl,-O1 -o piggybank build/bitcoin.o build/bitcoingui.o build/transactiontablemodel.o build/addresstablemodel.o build/optionsdialog.o build/sendcoinsdialog.o build/coincontroldialog.o build/coincontroltreewidget.o build/addressbookpage.o build/signverifymessagedialog.o build/aboutdialog.o build/editaddressdialog.o build/bitcoinaddressvalidator.o build/alert.o build/version.o build/sync.o build/util.o build/netbase.o build/key.o build/script.o build/main.o build/init.o build/net.o build/irc.o build/checkpoints.o build/addrman.o build/db.o build/walletdb.o build/clientmodel.o build/guiutil.o build/transactionrecord.o build/optionsmodel.o build/monitoreddatamapper.o build/transactiondesc.o build/transactiondescdialog.o build/bitcoinstrings.o build/bitcoinamountfield.o build/wallet.o build/keystore.o build/transactionfilterproxy.o build/transactionview.o build/walletmodel.o build/bitcoinrpc.o build/rpcdump.o build/rpcnet.o build/rpcmining.o build/rpcwallet.o build/rpcblockchain.o build/rpcrawtransaction.o build/overviewpage.o build/csvmodelwriter.o build/crypter.o build/sendcoinsentry.o build/qvalidatedlineedit.o build/bitcoinunits.o build/qvaluecombobox.o build/askpassphrasedialog.o build/protocol.o build/notificator.o build/qtipcserver.o build/rpcconsole.o build/noui.o build/kernel.o build/scrypt-x86.o build/scrypt-x86_64.o build/scrypt_mine.o build/pbkdf2.o build/scrypt-jane.o build/moc_bitcoingui.o build/moc_transactiontablemodel.o build/moc_addresstablemodel.o build/moc_optionsdialog.o build/moc_sendcoinsdialog.o build/moc_coincontroldialog.o build/moc_coincontroltreewidget.o build/moc_addressbookpage.o build/moc_signverifymessagedialog.o build/moc_aboutdialog.o build/moc_editaddressdialog.o build/moc_bitcoinaddressvalidator.o build/moc_clientmodel.o build/moc_guiutil.o build/moc_optionsmodel.o build/moc_monitoreddatamapper.o build/moc_transactiondesc.o build/moc_transactiondescdialog.o build/moc_bitcoinamountfield.o build/moc_transactionfilterproxy.o build/moc_transactionview.o build/moc_walletmodel.o build/moc_overviewpage.o build/moc_csvmodelwriter.o build/moc_sendcoinsentry.o build/moc_qvalidatedlineedit.o build/moc_qvaluecombobox.o build/moc_askpassphrasedialog.o build/moc_notificator.o build/moc_rpcconsole.o build/qrc_bitcoin.o -L/usr/lib -Lc:/deps/miniupnpc -lminiupnpc -lrt -LC:/deps/boost/stage/lib -Lc:/deps/db/build_unix -Lc:/deps/ssl -lssl -lcrypto -ldb_cxx -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53 -lpthread -lQtGui -lQtCore
    /usr/bin/ld: cannot find -lboost_system-mgw46-mt-sd-1_53
    /usr/bin/ld: cannot find -lboost_filesystem-mgw46-mt-sd-1_53
    /usr/bin/ld: cannot find -lboost_program_options-mgw46-mt-sd-1_53
    /usr/bin/ld: cannot find -lboost_thread-mgw46-mt-sd-1_53
    collect2: error: ld returned 1 exit status
    Makefile:298: recipe for target 'piggybank' failed
    make: *** [piggybank] Error 1
    I generate the makefile by running qmake-qt4 in the main directory. I already tried to downgrade Boost to version 1_54, but I don't have an older version and I think it should compile fine with a newer version without any problems. Anyone who has similar problems?
    When I run pacman -Ss boost-libs I get:
    extra/boost-libs 1.55.0-4 [installed]
    Free peer-reviewed portable C++ source libraries - Runtime
    Seems like nothing out of the ordinary.  I'm getting the exact same errors when compiling Foxcoin. I also tried to install Qt again, but that didn't help.
    Thanks for helping in advance.
    Last edited by robin007bond (2014-06-17 06:18:53)

    Neburski wrote:
    robin007bond wrote:Can you tell me which keywords you used?
    First I looked for one of the boost libraries that the program was looking for (e.g. the error for "cannot find -lboost_system-mgw46-mt-sd-1_53" means ld is looking for libboost_system-mgw46-mt-sd-1_53). I did it because the library name looked rather non-standard.
    locate boost_system
    After that I knew that the program you used was relying on a very particular boost library and that lead me to actually google for "boost_system-mgw46-mt-sd-1_53" to see what that would turn up and the second link is the one I posted in this forum.
    Anyway if you know something about Makefiles then you could have solved it by yourself rather easy as well.
    If you look in the Makefile you should find a line somewhere that has
    LIBS += -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53
    Essentially you can see from the output of "make that" it's looking for those files (look towards the end of the second "g++ -Wl,-O1 ..." line)
    g++ -Wl,-O1,--sort-common ....... -Lc:/deps/ssl -lssl -lcrypto -ldb_cxx -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53 -lpthread -lQtGui -lQtCore
    My first idea was immediately to have it link against the standard boost libraries by making the proposed changes, but I wanted to first check it on google. I can't tell you if it will make the software run correctly though.
    Hmm, I know some C++ basics but I use an IDE most of the time. Making makefiles was never needed so I never bothered with them. Thanks for elaborating! The solution you found worked.
    Last edited by robin007bond (2014-01-21 18:02:24)

  • My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    Restart your WiFi router and printer by removing power for 30 seconds.

  • HT6437 My itunes cannot locate my ipod. All the sync option are grayed out and diagnostics says that itunes cannot find usb ports and that no device is connected when it is. What should I do to solve this issue?

    So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
    When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
    Does anyone know how to solve this issue?

    Do the USB ports work for other devices?
    Does the iPod charge?
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with                  
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

    Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

    Reinstall on both.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.
    Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
         Tap Settings > General > Reset > Erase all content and settings.

Maybe you are looking for

  • Error while upgrading to SP3 from SP1 Exchange 2010

    Here is the error I get when trying to upgrade to SP3, it fails when it gets to the mailbox role. Summary: 8 item(s). 5 succeeded, 1 failed. Elapsed time: 00:34:21 Language Files Completed Elapsed Time: 00:11:05 Restoring services Completed Elapsed T

  • ADF:LOV declarative component not working inside table component.

    Hi, I have created a custome LOV control,I am using this custom LOV control inside the table component,I am passing the below values as the parameter KeyValue="#{row.bindings.Value.inputValue}" LovModel="#{row.bindings.Value.listOfValuesModel}" Value

  • How to sync my iphone?

    I am trying to sync my songs from my computer to my iphone.  But everytime I plug my phone into my computer it says I can't because my phone needs itunes 11.1 which I thought it has because I have upgrade it to the newest software.

  • ITunes on Mac OS X Server

    Anyone have experience in putting iTunes on a Mac Mini OS X Server for a home network? Is Home Sharing less complex?

  • ODI installation out of Oracle home

    Hi, I have to install Oracle Data Integrator on a development server where EPM 11.1.2 is already installed. I encounter the following error after setting the install folder (I leave it to default: D:\Oracle\Middleware\EPMSystem11R1): OUI-10044: The s