[solved] kernel 3.2.8 fails with loading nvidia and virtualbox modules
Topic says it. I just updated from kernel 3.2.7 to 3.2.8 and X won't start. The kernel fails to load the nvidia module with the follwing error: 'Exec format error'. Same for the virtualbox kernel modules. This is on x86_64, multilib and all testing repos enabled.
Downgrade to 3.2.7 by
pacman -S core/linux
solves the issue.
Last edited by Harey (2012-02-28 18:55:36)
Allan wrote:Bug tracker...
https://bugs.archlinux.org/task/28695
Similar Messages
-
[SOLVED] Kernel 2.6.32 tries to load 2.6.31 modules
After upgrading the kernel and firmware [also the kernel26 headers] , when I boot errors are now spat out along the lines of : "modprobe Fatal /lib/modules/ARCH2.6.31 does not exist" and there are no wifi, keyboard, usb etc modules loaded.
So why is it still looking for the old folder? ARCH2.6.32 exists in it's place. Googled to no effect, can anyone help? Something needs to be pointed at the new path but I don't know what. First time a kernel update has ever given me any trouble.
Cheers
Last edited by cuervo (2010-01-04 17:16:25)and you're absolutely _sure_ that the image you are loading is infact the 2.6.32-kernel?
At one point (in a previous life) I had a boot-partition (read-only) where I copied from /boot (which was on the root filesystem) after a kernel upgrade (silly, I know - these days I chainload instead). If I forgot to copy the new kernel/initrd, then I would still boot my old one but the modules (obviously) were nowhere to be found .... -
Failed to load nvidia kernel module
When I try to start x it outputs the following error
Failed to load nvidia kernel module
I'm trying to use the new nvidia-beta drivers from AUR but the same error occurs with ordinary nvidia drivers and the nv drivers. Under xorg.conf I currently have 'nvidia' next to driver and I've also put nvidia in the modules section of rc.conf
when I try to modprobe nvidia is just outputs 'module nvidia not found'Ended up booting into gnome using the vesa driver (max resolution was 800x600) and downloading the new nvidia beta setup from the nvidia website then going back into terminal and running it. Just had to download make from pacman and it compiled a new nvidia kernel module for me it seems. All works well with the new driver now.
Thanks. -
OCS on a cluster with Load balancing and fail safe environment
Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected]Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected] -
Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria -
Transport of Transformation failed with RC= 12 and job: RDDEXECL cancelled in Target sytem
Gurus,
When i am importing the workbench request from dev to qty.
I am getting error : Program terminated (job: RDDEXECL, no.: 22321300).
Transformation contains only Endroutine.
Job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxxxx were synchronized
The internal session was terminated with the runtime error UNCAUGHT_EXCEPTION (see ST2
Job cancelled.
When i see the dump it is througing errror at the method of following class.
CL_RSO_TLOGO_PERSISTENCY-CHECK_INITIALIZED
Could you please help. Thanks in advance.
AshokHi Ashok,
In QA use program "RSTRAN_ROUT_RSFO_CHECK" to check and remove any inconsistencies for the transformations. After that again transport those transformations in new TR and import in QA.
Also you have to search "Transport of Transformation failed with RC= 12 and job: RDDEXECL canceled in Target system" by Dinesh Tiwari.
Check the reply of Fun Sébastien in http://scn.sap.com/message/13795238#13795238. -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?
Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update. -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
Putting a row into a pageable cache failed with error 9 and error message
Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
ThanksHi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard -
[SOLVED] XOrg fails to load Nvidia driver on startup
Hi,
I'm having a fairly strange issue where XOrg is failing to load my driver when I start up my laptop. I'm using kdm, but this is causing it to fail. However, doing a simple
$sudo systemctl restart kdm
works, and everything starts up fine. When kdm is in the failed state, I see this:
$sudo systemctl status kdm
● kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2014-12-19 18:47:26 EST; 41s ago
Main PID: 247 (kdm)
CGroup: /system.slice/kdm.service
└─247 /usr/bin/kdm -nodaemon
Dec 19 18:47:26 laptop systemd[1]: Started K Display Manager.
Dec 19 18:47:27 laptop kdm[247]: X server died during startup
Dec 19 18:47:27 laptop kdm[247]: X server for display :0 cannot be started, session disabled
And in my XOrg log, I see:
[ 3.639]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 3.639]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 3.639] X Protocol Version 11, Revision 0
[ 3.639] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 3.639] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 3.639] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 3.639] Build Date: 10 December 2014 02:34:24PM
[ 3.639]
[ 3.639] Current version of pixman: 0.32.6
[ 3.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.639] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:47:26 2014
[ 3.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.649] (==) No Layout section. Using the first Screen section.
[ 3.649] (==) No screen section available. Using defaults.
[ 3.649] (**) |-->Screen "Default Screen Section" (0)
[ 3.649] (**) | |-->Monitor "<default monitor>"
[ 3.650] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.650] (==) Automatically adding devices
[ 3.650] (==) Automatically enabling devices
[ 3.650] (==) Automatically adding GPU devices
[ 3.658] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.658] Entry deleted from font path.
[ 3.659] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.659] Entry deleted from font path.
[ 3.659] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.660] Entry deleted from font path.
[ 3.660] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.660] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.660] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.660] (II) Loader magic: 0x818d80
[ 3.660] (II) Module ABI versions:
[ 3.660] X.Org ANSI C Emulation: 0.4
[ 3.660] X.Org Video Driver: 18.0
[ 3.660] X.Org XInput driver : 21.0
[ 3.660] X.Org Server Extension : 8.0
[ 3.662] (EE) systemd-logind: failed to get session: PID 267 does not belong to any known session
[ 3.663] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.663] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.664] (II) LoadModule: "glx"
[ 3.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.767] (II) Module glx: vendor="NVIDIA Corporation"
[ 3.767] compiled for 4.0.2, module version = 1.0.0
[ 3.767] Module class: X.Org Server Extension
[ 3.768] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 3.769] (==) Matched nouveau as autoconfigured driver 0
[ 3.769] (==) Matched nv as autoconfigured driver 1
[ 3.769] (==) Matched modesetting as autoconfigured driver 2
[ 3.769] (==) Matched fbdev as autoconfigured driver 3
[ 3.769] (==) Matched vesa as autoconfigured driver 4
[ 3.769] (==) Assigned the driver to the xf86ConfigLayout
[ 3.769] (II) LoadModule: "nouveau"
[ 3.769] (WW) Warning, couldn't open module nouveau
[ 3.769] (II) UnloadModule: "nouveau"
[ 3.769] (II) Unloading nouveau
[ 3.769] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.769] (II) LoadModule: "nv"
[ 3.769] (WW) Warning, couldn't open module nv
[ 3.769] (II) UnloadModule: "nv"
[ 3.769] (II) Unloading nv
[ 3.769] (EE) Failed to load module "nv" (module does not exist, 0)
[ 3.769] (II) LoadModule: "modesetting"
[ 3.769] (WW) Warning, couldn't open module modesetting
[ 3.769] (II) UnloadModule: "modesetting"
[ 3.769] (II) Unloading modesetting
[ 3.769] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.769] (II) LoadModule: "fbdev"
[ 3.769] (WW) Warning, couldn't open module fbdev
[ 3.769] (II) UnloadModule: "fbdev"
[ 3.769] (II) Unloading fbdev
[ 3.769] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.769] (II) LoadModule: "vesa"
[ 3.770] (WW) Warning, couldn't open module vesa
[ 3.770] (II) UnloadModule: "vesa"
[ 3.770] (II) Unloading vesa
[ 3.770] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.770] (EE) No drivers available.
[ 3.770] (EE)
Fatal server error:
[ 3.770] (EE) no screens found(EE)
[ 3.770] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3.770] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3.770] (EE)
Which looks like it loads my nvidia driver, but then just decides not to use it for some reason... After I restart kdm, it seems to use the driver fine:
[ 78.897]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 78.897]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 78.897] X Protocol Version 11, Revision 0
[ 78.897] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 78.897] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 78.897] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 78.897] Build Date: 10 December 2014 02:34:24PM
[ 78.897]
[ 78.897] Current version of pixman: 0.32.6
[ 78.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:48:38 2014
[ 78.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.897] (==) No Layout section. Using the first Screen section.
[ 78.897] (==) No screen section available. Using defaults.
[ 78.897] (**) |-->Screen "Default Screen Section" (0)
[ 78.897] (**) | |-->Monitor "<default monitor>"
[ 78.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.898] (==) Automatically adding devices
[ 78.898] (==) Automatically enabling devices
[ 78.898] (==) Automatically adding GPU devices
[ 78.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 78.898] Entry deleted from font path.
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.898] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 78.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.898] (II) Loader magic: 0x818d80
[ 78.898] (II) Module ABI versions:
[ 78.898] X.Org ANSI C Emulation: 0.4
[ 78.898] X.Org Video Driver: 18.0
[ 78.898] X.Org XInput driver : 21.0
[ 78.898] X.Org Server Extension : 8.0
[ 78.900] (EE) systemd-logind: failed to get session: PID 542 does not belong to any known session
[ 78.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.901] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.901] (II) LoadModule: "glx"
[ 78.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.913] (II) Module glx: vendor="NVIDIA Corporation"
[ 78.913] compiled for 4.0.2, module version = 1.0.0
[ 78.913] Module class: X.Org Server Extension
[ 78.913] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
[ 78.914] (==) Matched nvidia as autoconfigured driver 0
[ 78.914] (==) Matched nouveau as autoconfigured driver 1
[ 78.914] (==) Matched nv as autoconfigured driver 2
[ 78.914] (==) Matched nouveau as autoconfigured driver 3
[ 78.914] (==) Matched nv as autoconfigured driver 4
[ 78.914] (==) Matched modesetting as autoconfigured driver 5
[ 78.914] (==) Matched fbdev as autoconfigured driver 6
[ 78.914] (==) Matched vesa as autoconfigured driver 7
[ 78.914] (==) Assigned the driver to the xf86ConfigLayout
[ 78.914] (II) LoadModule: "nvidia"
[ 78.914] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.920] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.920] compiled for 4.0.2, module version = 1.0.0
[ 78.920] Module class: X.Org Video Driver
[ 78.920] (II) LoadModule: "nouveau"
[ 78.921] (WW) Warning, couldn't open module nouveau
[ 78.921] (II) UnloadModule: "nouveau"
[ 78.921] (II) Unloading nouveau
[ 78.921] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.921] (II) LoadModule: "nv"
[ 78.921] (WW) Warning, couldn't open module nv
[ 78.921] (II) UnloadModule: "nv"
[ 78.921] (II) Unloading nv
[ 78.921] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.921] (II) LoadModule: "modesetting"
[ 78.921] (WW) Warning, couldn't open module modesetting
[ 78.921] (II) UnloadModule: "modesetting"
[ 78.921] (II) Unloading modesetting
[ 78.921] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 78.921] (II) LoadModule: "fbdev"
[ 78.922] (WW) Warning, couldn't open module fbdev
[ 78.922] (II) UnloadModule: "fbdev"
[ 78.922] (II) Unloading fbdev
[ 78.922] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.922] (II) LoadModule: "vesa"
[ 78.922] (WW) Warning, couldn't open module vesa
[ 78.922] (II) UnloadModule: "vesa"
[ 78.922] (II) Unloading vesa
[ 78.922] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.922] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 78.922] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.922] (++) using VT number 7
[ 78.935] (II) Loading sub module "fb"
[ 78.935] (II) LoadModule: "fb"
[ 78.935] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.936] (II) Module fb: vendor="X.Org Foundation"
[ 78.936] compiled for 1.16.2.901, module version = 1.0.0
[ 78.936] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.936] (II) Loading sub module "wfb"
[ 78.936] (II) LoadModule: "wfb"
[ 78.936] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.937] (II) Module wfb: vendor="X.Org Foundation"
[ 78.937] compiled for 1.16.2.901, module version = 1.0.0
[ 78.937] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.937] (II) Loading sub module "ramdac"
[ 78.937] (II) LoadModule: "ramdac"
[ 78.937] (II) Module "ramdac" already built-in
[ 78.939] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.939] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 78.939] (==) NVIDIA(0): RGB weight 888
[ 78.939] (==) NVIDIA(0): Default visual is TrueColor
[ 78.939] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 78.940] (**) NVIDIA(0): Enabling 2D acceleration
[ 79.610] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 79.610] (II) NVIDIA(0): 3D Vision stereo.
[ 79.610] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 79.612] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 79.612] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 79.612] (--) NVIDIA(0): VideoBIOS: 80.04.67.00.06
[ 79.612] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 79.616] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 79.616] (--) NVIDIA(0): DFP-2
[ 79.616] (--) NVIDIA(0): DFP-3
[ 79.616] (--) NVIDIA(0): DFP-4
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal LVDS
[ 79.616] (--) NVIDIA(GPU-0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 79.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 79.616] (**) NVIDIA(0): has been enabled on all display devices.)
[ 79.618] (==) NVIDIA(0):
[ 79.618] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 79.618] (==) NVIDIA(0): will be used as the requested mode.
[ 79.618] (==) NVIDIA(0):
[ 79.619] (II) NVIDIA(0): Validated MetaModes:
[ 79.619] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 79.619] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 80.144] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 80.144] (--) NVIDIA(0): option
[ 80.144] (--) Depth 24 pixmap format is 32 bpp
[ 80.144] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.144] (II) NVIDIA: access.
[ 80.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 80.150] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 80.150] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 80.150] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 80.150] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 80.150] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 80.150] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 80.150] (II) NVIDIA(0): Config Options in the README.
[ 80.155] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 80.532] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.532] (==) NVIDIA(0): Backing store enabled
[ 80.532] (==) NVIDIA(0): Silken mouse enabled
[ 80.533] (==) NVIDIA(0): DPMS enabled
[ 80.533] (II) Loading sub module "dri2"
[ 80.533] (II) LoadModule: "dri2"
[ 80.533] (II) Module "dri2" already built-in
[ 80.533] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.533] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.533] (--) RandR disabled
[ 80.539] (II) Initializing extension GLX
[ 80.605] (II) config/udev: Adding input device Power Button (/dev/input/event14)
[ 80.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.605] (II) LoadModule: "evdev"
[ 80.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.607] (II) Module evdev: vendor="X.Org Foundation"
[ 80.607] compiled for 1.16.2, module version = 2.9.1
[ 80.607] Module class: X.Org XInput Driver
[ 80.607] ABI class: X.Org XInput driver, version 21.0
[ 80.607] (II) Using input driver 'evdev' for 'Power Button'
[ 80.607] (**) Power Button: always reports core events
[ 80.607] (**) evdev: Power Button: Device: "/dev/input/event14"
[ 80.608] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.608] (--) evdev: Power Button: Found keys
[ 80.608] (II) evdev: Power Button: Configuring as keyboard
[ 80.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input18/event14"
[ 80.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.608] (**) Option "xkb_rules" "evdev"
[ 80.608] (**) Option "xkb_model" "pc104"
[ 80.608] (**) Option "xkb_layout" "us"
[ 80.635] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.635] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.635] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.635] (**) Video Bus: always reports core events
[ 80.635] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.635] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.635] (--) evdev: Video Bus: Found keys
[ 80.635] (II) evdev: Video Bus: Configuring as keyboard
[ 80.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input19/event15"
[ 80.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.635] (**) Option "xkb_rules" "evdev"
[ 80.635] (**) Option "xkb_model" "pc104"
[ 80.635] (**) Option "xkb_layout" "us"
[ 80.636] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 80.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.636] (II) Using input driver 'evdev' for 'Power Button'
[ 80.636] (**) Power Button: always reports core events
[ 80.636] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 80.636] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.636] (--) evdev: Power Button: Found keys
[ 80.636] (II) evdev: Power Button: Configuring as keyboard
[ 80.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input17/event13"
[ 80.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.636] (**) Option "xkb_rules" "evdev"
[ 80.636] (**) Option "xkb_model" "pc104"
[ 80.636] (**) Option "xkb_layout" "us"
[ 80.637] (II) config/udev: Adding input device Lid Switch (/dev/input/event11)
[ 80.637] (II) No input driver specified, ignoring this device.
[ 80.637] (II) This device may have been added with another device file.
[ 80.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event12)
[ 80.637] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.637] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.637] (**) Sleep Button: always reports core events
[ 80.637] (**) evdev: Sleep Button: Device: "/dev/input/event12"
[ 80.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.637] (--) evdev: Sleep Button: Found keys
[ 80.637] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16/event12"
[ 80.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.637] (**) Option "xkb_rules" "evdev"
[ 80.637] (**) Option "xkb_model" "pc104"
[ 80.637] (**) Option "xkb_layout" "us"
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.639] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event3)
[ 80.639] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 80.639] (**) LOGITECH G110 G-keys: always reports core events
[ 80.639] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event3"
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 80.639] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 80.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/0003:046D:C22B.0003/input/input7/event3"
[ 80.639] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 80.639] (**) Option "xkb_rules" "evdev"
[ 80.639] (**) Option "xkb_model" "pc104"
[ 80.639] (**) Option "xkb_layout" "us"
[ 80.639] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event4)
[ 80.639] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.639] (**) Gaming Keyboard G110: always reports core events
[ 80.639] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event4"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/0003:046D:C22A.0004/input/input8/event4"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.640] (**) Option "xkb_layout" "us"
[ 80.640] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event5)
[ 80.640] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.640] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.640] (**) Gaming Keyboard G110: always reports core events
[ 80.640] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event5"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.1/0003:046D:C22A.0005/input/input9/event5"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.641] (**) Option "xkb_layout" "us"
[ 80.641] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event1)
[ 80.641] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[ 80.641] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.641] (**) Razer Razer Lachesis: always reports core events
[ 80.641] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event1"
[ 80.641] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.641] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[ 80.641] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[ 80.641] (--) evdev: Razer Razer Lachesis: Found relative axes
[ 80.641] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[ 80.641] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[ 80.641] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[ 80.641] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[ 80.641] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:1532:000C.0001/input/input5/event1"
[ 80.641] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 13)
[ 80.642] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[ 80.642] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[ 80.642] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[ 80.642] (II) No input driver specified, ignoring this device.
[ 80.642] (II) This device may have been added with another device file.
[ 80.643] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[ 80.643] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[ 80.643] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.643] (**) Razer Razer Lachesis: always reports core events
[ 80.643] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[ 80.643] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.643] (--) evdev: Razer Razer Lachesis: Found keys
[ 80.643] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[ 80.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:1532:000C.0002/input/input6/event2"
[ 80.643] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 14)
[ 80.643] (**) Option "xkb_rules" "evdev"
[ 80.643] (**) Option "xkb_model" "pc104"
[ 80.643] (**) Option "xkb_layout" "us"
[ 80.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 80.643] (II) No input driver specified, ignoring this device.
[ 80.643] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 80.645] (II) No input driver specified, ignoring this device.
[ 80.645] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event17)
[ 80.645] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 80.645] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 80.645] (**) BisonCam, NB Pro: always reports core events
[ 80.645] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event17"
[ 80.645] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x512
[ 80.645] (--) evdev: BisonCam, NB Pro: Found keys
[ 80.645] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 80.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input23/event17"
[ 80.645] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 15)
[ 80.645] (**) Option "xkb_rules" "evdev"
[ 80.645] (**) Option "xkb_model" "pc104"
[ 80.645] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.646] (**) Option "xkb_rules" "evdev"
[ 80.646] (**) Option "xkb_model" "pc104"
[ 80.646] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 80.646] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 80.647] (II) LoadModule: "synaptics"
[ 80.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.647] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.647] compiled for 1.16.0, module version = 1.8.1
[ 80.647] Module class: X.Org XInput Driver
[ 80.647] ABI class: X.Org XInput driver, version 21.0
[ 80.647] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 80.647] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.647] (**) Option "Device" "/dev/input/event20"
[ 80.756] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4660 (res 47)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 80.757] (**) Option "TapButton1" "1"
[ 80.757] (**) Option "TapButton2" "2"
[ 80.757] (**) Option "TapButton3" "3"
[ 80.757] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input22/event20"
[ 80.810] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 80.810] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.811] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 80.811] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 80.811] (II) No input driver specified, ignoring this device.
[ 80.811] (II) This device may have been added with another device file.
[ 88.265] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.265] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.291] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: 1680x1050_60_0 @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 89.221] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 89.221] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 90.639] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 90.639] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93.745] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 93.745] (II) NVIDIA(GPU-0): 3D Vision stereo.
Notably, the following lines appear in the working case, but not the broken case:
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
Does anyone know what might be going on here?
Last edited by straemer (2014-12-20 13:03:58)Hmmmm, that doesn't seem to be the issue. I have a nvidia geforce gtx 670mx. The nvidia website does link me to the 340xx driver for that card, but downgrading to that version still has the same issue. I suspect the issue is in Xorg, since it seems to load the module, but then decides it doesn't have a driver to run for some reason.
-
RFC connection (SM59) fails with load balancing enabled.
Hello All,
We have an RFC connection setup between two SAP systems. The RFC connection works fine if it points to the destination system. But if we enable load balancing, the connection fails with this error:
ERROR partner not reached (host <hostname>, service sapms<SID>)
LOCATION SAP-Server <source system> on host <host name of source> (wp 1)
DETAIL NiPConnect2
CALL SO_ERROR
COMPONENT NI (network interface)
COUNTER 3027
ERROR TEXT Connection refused
ERROR NUMBER 79
MODULE niuxi.c
LINE 1069
RETURN CODE -10
SUBRC 0
RELEASE 46D
TIME Mon Aug 18 18:33:30 2008
VERSION 34
I've checked the /etc/services file, the following entries exist
sapms<SID> 3606/tcp
sapms<SID>s 3600/tcp
lstst at the source system works fine
lgtst -H <target host name> -S sapms<SID>
niping at the target system has a problem
> niping -c -S 3606
Mon Aug 18 10:23:14 2008
connect to server o.k.
ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.cpp 2629]
ERROR connection to partner broken
TIME Mon Aug 18 10:23:14 2008
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE niuxi.c
LINE 905
DETAIL NiPRead (0.0.0.0/0, hdl 1)
SYSTEM CALL recv
COUNTER 1
Please help me figure out the problem.
regards,
RoshniHi,
I think you have added wrong port entry in services file.
The entry of sap servers in services file for load balancing are
sapms<SID> 36<instance number>/tcp
so please check once again and add the entry using above formula in services file.
Also add the entry of all SAP servers in your hosts file.
<IP> <HOSTNAME> -
[SOLVED] python-efl: command 'gcc' failed with exit status 1
Hi everyone! I'm running an x86_64 system with Enlightenment. I'm trying to install econnman from source to have a simpler life trying to connect to my University's wifi network. However, it misses the python-efl dependency. I downloaded it from the AUR, but I get the error message "error: command 'gcc' failed with exit status 1" when running 'python setup.py build'. This is the complete terminology output:
[dude@susan python-efl-1.8.0]$ sudo python setup.py build
Checking for Eina: OK, found 1.11.2
Checking for Eo: OK, found 1.11.2
Checking for Evas: OK, found 1.11.2
Checking for Ecore: OK, found 1.11.2
Checking for EcoreFile: OK, found 1.11.2
Checking for Edje: OK, found 1.11.2
Checking for Emotion: OK, found 1.11.2
Checking for DBus: OK, found 1.2.0
Checking for Elementary: OK, found 1.11.2
running build
running build_py
creating build/lib.linux-x86_64-3.4/e_dbus
copying compat/e_dbus/__init__.py -> build/lib.linux-x86_64-3.4/e_dbus
running build_ext
building 'eo' extension
gcc -pthread -Wno-unused-result -Werror=declaration-after-statement -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -fPIC -DEFL_BETA_API_SUPPORT -Iinclude/ -I/usr/include/python3.4m -c efl/eo/efl.eo.c -o build/temp.linux-x86_64-3.4/efl/eo/efl.eo.o -I/usr/include/efl-1 -I/usr/include/eo-1 -I/usr/include/efl-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina
efl/eo/efl.eo.c: In function ‘__pyx_pf_3efl_2eo_4event_global_freeze_get’:
efl/eo/efl.eo.c:1127:3: warning: implicit declaration of function ‘eo_event_global_freeze_get’ [-Wimplicit-function-declaration]
eo_do(((const Eo *)eo_base_class_get()), eo_event_global_freeze_get((&__pyx_v_fcount)));
^
efl/eo/efl.eo.c: In function ‘__pyx_f_3efl_2eo_object_from_instance’:
efl/eo/efl.eo.c:1445:3: warning: implicit declaration of function ‘eo_base_data_get’ [-Wimplicit-function-declaration]
eo_do(__pyx_v_obj, eo_base_data_get(__pyx_k_5, (&__pyx_v_data)));
^
efl/eo/efl.eo.c: In function ‘__pyx_f_3efl_2eo__eo_event_del_cb’:
efl/eo/efl.eo.c:2050:3: warning: implicit declaration of function ‘eo_base_data_del’ [-Wimplicit-function-declaration]
eo_do(__pyx_v_self->obj, eo_base_data_del(__pyx_k_5));
^
In file included from efl/eo/efl.eo.c:317:0:
efl/eo/efl.eo.c: In function ‘__pyx_pf_3efl_2eo_2Eo_4__repr__’:
efl/eo/efl.eo.c:2286:30: error: too many arguments to function ‘eo_parent_get’
eo_do(__pyx_v_self->obj, eo_parent_get((&__pyx_v_parent)));
^
/usr/include/eo-1/Eo.h:588:8: note: in definition of macro ‘_eo_do_common’
__VA_ARGS__; \
^
efl/eo/efl.eo.c:2286:5: note: in expansion of macro ‘eo_do’
eo_do(__pyx_v_self->obj, eo_parent_get((&__pyx_v_parent)));
^
In file included from /usr/include/eo-1/Eo.h:1112:0,
from efl/eo/efl.eo.c:317:
/usr/include/eo-1/eo_base.eo.h:37:12: note: declared here
EOAPI Eo * eo_parent_get(void);
^
efl/eo/efl.eo.c: In function ‘__pyx_f_3efl_2eo_2Eo__set_obj’:
efl/eo/efl.eo.c:2496:3: warning: implicit declaration of function ‘eo_base_data_set’ [-Wimplicit-function-declaration]
eo_do(__pyx_v_self->obj, eo_base_data_set(__pyx_k_5, ((void *)__pyx_v_self), NULL));
^
In file included from efl/eo/efl.eo.c:317:0:
efl/eo/efl.eo.c: In function ‘__pyx_pf_3efl_2eo_2Eo_14parent_get’:
efl/eo/efl.eo.c:2963:28: error: too many arguments to function ‘eo_parent_get’
eo_do(__pyx_v_self->obj, eo_parent_get((&__pyx_v_parent)));
^
/usr/include/eo-1/Eo.h:588:8: note: in definition of macro ‘_eo_do_common’
__VA_ARGS__; \
^
efl/eo/efl.eo.c:2963:3: note: in expansion of macro ‘eo_do’
eo_do(__pyx_v_self->obj, eo_parent_get((&__pyx_v_parent)));
^
In file included from /usr/include/eo-1/Eo.h:1112:0,
from efl/eo/efl.eo.c:317:
/usr/include/eo-1/eo_base.eo.h:37:12: note: declared here
EOAPI Eo * eo_parent_get(void);
^
efl/eo/efl.eo.c: In function ‘__pyx_pf_3efl_2eo_2Eo_20event_freeze_get’:
efl/eo/efl.eo.c:3104:3: warning: implicit declaration of function ‘eo_event_freeze_get’ [-Wimplicit-function-declaration]
eo_do(__pyx_v_self->obj, eo_event_freeze_get((&__pyx_v_fcount)));
^
error: command 'gcc' failed with exit status 1
Can anyone help me? Please tell me every output you need. Thanks and a good day to you, sir!
Last edited by HisDudeness (2014-10-02 08:47:15)You know what? You're right!
I don't know how I exactly got that version... I got back to the AUR and downloaded the new one. The strange thing is, while that old version's tar.gz conained a lot of files like I'd expect from a source archive, the current version only contained the files .AURINFO and PKGBUILD. Guess that's the way it should be, I'm new to all of this so I was initially surprised. Obviously, running makepkg here worked like a charm and downloaded everything that was needed for it to install. Then, econnman installed just fine too. What I can't explain to myself is why 1.8.0's tar.gz contained all those files.
In the end, I couldn't use nor connman cli nor econnman to connect to my Campus' WiFi but, after a lot of trouble, I got it to work with dhclient and wpa_supplicant like it's suggested. This hasn't been useless anyway, I saw how to install from the AUR for the first time.
I'll mark the post as solved, but I got one last question: provided I don't need econnman anymore, do you suggest me to keep python-efl or to remove it? Is it needed for something else I'll certainly run into in the future? -
Gentlemen, I have wasted a day and probably lost my entire Itunes music collection by allowing an upgrade of Itunes version 11.1.4 Interesting because the other upgrades were routine. This failed to load and the message of missing MSVCR80.dll file and verify that you have sufficient privilege to start system service are of little comfort. Have re-installed numerous times to no avail. Wassup? I need help.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Loadlibrary failed with error 126 the specified module could not be found
Hello i get this error message at random when am using oracle sql developer, sometimes it comes right after startup, and some times after 5 mins.
the error closes down the program
please helpSearching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".
Maybe you are looking for
-
HT2693 How can I get credit card information off of my iPhone
Is there anyone out there to help me
-
Compiling on xp is no problem but I cannot start my appletviewer
I can compile on xp but I cannot start my applets, in DOS example : c:\BIN> appletviewer balloon.html c:\BIN> After this nothing happens.. I mean it does something but it does not start the applet. I tried everything looking up in the advanced browse
-
What audio cable do I need to hook from macbook pro to an amp?
Yeah, just wondering if any audio cable will work to hook from Macbook Pro (10..5.8) to an amp? Not skilled in this area at all! thanks!
-
Write the output of a query in ODI to file
Hi Friends, I am using ODI 11g. In ODI I want to write the output of the below query to a unix file. SELECT 'H'|| rpad('SB9KT.KTPRTO.EBSDATA.D0000000','30',' ')|| rpad(to_char(sysdate, 'YYYYMMDDHHMMSS'), 16, ' ') FROM dual; Please suggest any inputs.
-
Button background fill "Linear - to top" not showing after save.
I've made the proper edits to make these buttons look very "cool" having the background filled to a gradient look which is called "Linear to top", but once I save this form and open the PDF the button color is solid rather then gradient or "linear to