[SOLVED] Kernel over 3.14.4-1 does not detect my hardware proper

Hello everyone,
i've a little problem with any kernel higher then 3.14.4-1.. After a long time, i bootet up my PC and updatet Arch. There where nearly 350 package updates. Everything went fine, except for the kernel update.
Updating to kernel 3.16.3-1 broke nearly everything on my system. Arch boots but does not detect any hardware like the graphics card or the network adapter. I've read journalctl but can't find any usefull hints or a point do begin my error searching.
Maybe someone of you can give me a useful hint…
Here is a link to the logfile: http://p.tkolb.de/SpGKcAQjxk1A.txt
Thank you very much in advance for your help,
Sqozz
Last edited by Sqozz (2014-09-29 17:45:46)

I've reverted to the last working kernel with "pacman -U".
Could now find the Problem: /boot was not mountet during the kernel build.. Such a stupid mistake.
Thank you anyway for your fast replies!

Similar Messages

  • Windows 7 does not detect network hardware

    Using Boot Camp, I installed Windows 7.
    After restarting the computer it does not detect network hardware.
    So I cannot connect to my Wifi.
    What should I do?

    Did you download and install the Windows Support software? It was the first menu item when you ran Bootcamp Assistant. If not, run Bootcamp Assistant again and select the menu item to download the Windows Support software. Read the Bootcamp Installation Guide. http://www.apple.com/support/bootcamp/

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • [SOLVED] k3b does not detect optical drive

    Hello,
    I am running Arch Linux x86_64 with recent updates. I have k3b 2.0.3 and when I launch it I get message that it does not detect my optical drive, and I need hal daemon. I checked, udev is running, node in dev /dev/sr0 has root.optical, my user is in optical group. How do I fix this? I want to burn BluRay disk, maybe k3b even does not support it? And is there a better tool for optical discs than k3b? I use KDE 4 so Qt tool would be nice
    Last edited by adomas (2015-01-09 17:34:05)

    [EDIT] I think problem is solved. Not sure how, but after reboot it works now
    Thank you for you reply, Lone_Wolf
    Permissions seems to be ok:
    [adomas@voidbox ~]$ ls -l /dev/sr0
    brw-rw---- 1 root optical 11, 0 Jan 9 21:18 /dev/sr0
    [adomas@voidbox ~]$
    And about dependencies I think I have what I need:
    [root@voidbox adomas]# pacman -Qi k3b
    Name : k3b
    Version : 1:2.0.3a-1
    Description : Feature-rich and easy to handle CD burning application
    Architecture : x86_64
    URL : http://sourceforge.net/projects/k3b/
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : kdebase-runtime libkcddb libsamplerate libmad ffmpeg taglib libmpcdec libdvdread cdrkit
    libxft
    Optional Deps : dvd+rw-tools: for dvd burning support [installed]
    vcdimager: for vcd burning support
    transcode: for advanced mpeg conversion support
    emovix: for bootable multimedia cd/dvd support
    cdrdao: for disk-at-once (DAO) mode support [installed]
    cdparanoia: for cd ripping support
    Required By : None
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 33.81 MiB
    Packager : Eric Belanger <[email protected]>
    Build Date : Thu 06 Nov 2014 05:21:31 AM EET
    Install Date : Wed 07 Jan 2015 07:28:57 PM EET
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    [root@voidbox adomas]#
    What else can be a problem? By the way may optical drive is external, connected via USB, if it makes any difference.
    Last edited by adomas (2015-01-09 17:33:50)

  • I have ripped cds on to windows and i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    i have ripped cds on to windows media player but i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    It should work... when I got my first iPod I transferred my entire library over and it was all .wma files. What specific steps have you tried?

  • My ipad keeps restarting over and over again and even it does not appear the home screen

    my ipad keeps restarting over and over again and even it does not appear the home screen...............................how can i fix this.................
    `

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Photo importer (12.0) does not detect my Android phone (OS X Mavericks) over USB

    I am running Photoshop Elements 12.0 on OS X Mavericks. When I do, "File > Get Photos and Videos > From Camera or Card Reader", but it does not detect my Android device (Nexus 4, 4.2.2). On the Android side, I switch between Media Device (MTP) and Camera (PTP), refreshing the list, to no avail. OS X's Image Capture sees the files; Android's File Transfer utility does, too. I've tried multiple USB ports, but that doesn't help.
    What's wrong?
    Thanks in advance.

    That is what I had to do, but I should be able to skip that extra step, especially because I like Photoshop Element's ability to verify the pictures and delete them directly from the source. If this really isn't possible directly from Photoshop Elements, then this issue is a fairly major oversight.

  • Performance Update 1.0 "Your computer does not have eligible hardware" ?

    i tried to do the apple Performance Update 1.0 update but when i double clicked the pkg file it says "This computer does not need this update." "Your computer does not have eligible hardware." why is it saying this and what should i do? just so you guys know i have a intell macbook pro 15" and ive been have overheating problems that disconnect me from the internet when it overheats and then i have to restart the computer to fix, and also my computer is real slow with alot of hanging beachballs since i upgraded to snow leopard. im hoping this update will solve these problems if i can figure out how to download it.
    another thing i should point out is this update did not come up in the software update. i went to the Performance Update 1.0 page myself to download
    Message was edited by: johnpalley

    Yeah but what about the rest of us!
    I have two Macbook Pros (Early 2008) with upgraded hard drives that didn't have this clicking (hard drive head parking) issue in Leopard but now do in Snow Leopard. Apple knows this is an issue, makes an update pretty much for every other model but this! I've called Apple Care and no one seams to have heard of this issue even though its all over the internet and they released an update to specifically address this issue!!! Come on Apple, if you going to attempt to address an issue do it for all the computers effected! What my $3000 spent a year and a half ago is no good and what... now you consider my computer obsolete?
    *** - I say that since I've contacted Apple about this for the past 2 months, they come out with an update to fix the issue, I'm all excited only to find out my computer doesn't quality & my computer will now continue to pause for 2-4 seconds 100 times a day!!! Apple get it together... Oh and its the same hard drive that is BTO from apple but since I installed it (which your able per Apple) the hard drive doesn't have the custom apple drivers?

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • ITunes V12.1.2.27 on Windows 8 does not detect iPhone 6 with IOS v8.3

    Hello there,
    It all began when I installed the latest IOS 8.3 and iTunes V12.1.2.27. iTunes simply does not detect my iPhone 6 any longer, but it does detect my old iPod mini. Everything used to be working just fine until the software update was done.
    I've run thru all the steps on the Apple support page and spent over an hour on the phone with customer support. Checked the Apple mobile device driver, deinstalled iTunes, reinstalled iTunes, changed connecting cables etc etc. Nothing works!!
    Help!
    LES

    exact same issue. And I can be TOTALLY sure it is related to the update since I was at the birthday party of my little nephew taking photo and everything were just fine. Then my brother asked me if I had already updated my iPhone. I said no and then I updated it while I was still there. From the moment the phone ended the update, I ended taking photos... The update screwed the camera focus mechanism somehow. I'm trying to downgrade to 8.1.3 and see if it will be back to normal. In this case it is a software issue, otherwise it will be a hardware failure caused by the update. I'm dowloading 8.1.3 ipsw right now.

  • Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

    We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
    We do not want to make any transfer of data or cloned.
    We want to do a clean install with Windows 8.1
    The BIOS recognizes the SSD
    But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
    https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
    https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
    https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
    i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
    and with toshiba package
    http://support.toshiba.com/support/viewContentDetail?contentId=4004211
    you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
    But always the drive CRUCIAL is not reconized by the boot instalation of windows
    The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
    any help?
    Thanks

    Hi
    Did you solve this issue?
    Could you install the Windows 8.1 system on this SSD drive?
    I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
    From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
    How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
    Feedback would be appreciated.

  • Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

    On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
    The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
    NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
    Hence I think that it's very likely that this is a Windows-specific driver issue.
    Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • Display Preferences does not detect dual monitors

    Display Preferences does not detect dual monitors.
    There is no workaround here.
    Only a prompt update from apple will solve this.
    Any level 5 geniuses I welcome your guidance... please prove me otherwise.
    thanks
    --Marconi

    Hi marconi de baloni,
    Thanks for the question. Based on what you stated, it seems like the computer is not recognizing a second display. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    OS X Yosemite: Connect multiple displays to your Mac
    If a display is not recognized, choose Apple menu > System Preferences on the primary Mac, click Displays, then click Display.
    Open the Display pane for me
    Then click the Detect Displays button.
    You can also try putting your Mac to sleep and then waking it.
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • Wi-Fi does not detect on Satellite L40-139

    Hello!
    I have a problem with Wi-Fi connection on Toshiba L40-139 under Windows XP Professional
    I have all drivers for this model from this site.
    Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter was installed.
    But during the installation there was an error "Couldn't install driver".
    Wi-fi card does not detect by device manager
    When I try connect to Wi-Fi network I have a message that there isn't any Wi-Fi devices on my notebook.
    Help, please!

    Hi
    As Im not mistaken the L40-139 PSL40E supports the Atheros 802.11g WLan card.
    And therefore you should use and install the Atheros Wlan card driver!!!
    Additionally you should perform a BIOS update.
    According to some postings here in the forum, the BIOS update helps to solve some WLan issues.
    Check it out & good luck
    Bye

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

Maybe you are looking for