[SOLVED]kernel26-ck-core2 help
Hi,
This may seem blatantly obvious to some, however, I have not been able to find the answer. Sorry if this seems obvious but this is my first month working with Linux legitimately ever and am unable to get my modules to load after installing kernel26-ck. They fail on boot. I have found the modules directory residing in /lib/modules/2.6.39-ck. How do I use this with my boot up instead of the standard ARCH one?
Last edited by johan1391 (2011-07-17 08:34:12)
@op - try an experiment for me: remove all entries from your MODULES array, reboot. Once rebooted, manually modprobe each one by hand and see if you get an error... i.e.
# modprobe wl
# modprobe acpi-cpufreq
... etc
BTW, as others have mentioned, the nvidia module doesn't need to go in the array, and it's simply named, 'nvidia' not 'nvidia-ck' or anything else.
Also, vboxdrv needs the kernel26-ck-core2-headers packages and you must rebuild it manually whenever there is a new release via "/etc/rc.d/vboxdrv setup"
All of the other modules in your array should be just fine to load. Please report back either way in this thread.
Similar Messages
-
My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.
Restart your WiFi router and printer by removing power for 30 seconds.
-
Hi my iphone 4 is disabled how can solve this problem? help me please
hi my iphone 4 is disabled how can solve this problem? help me please
What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls
Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it -
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"
I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig -
HT201413 error 1600 is not solve so pls any help me.
error 1600 is not solve so pls any help me.
and contect me.
pls...........
thank u> How many times have you posted this question by now?
5 times:
http://forum.java.sun.com/thread.jspa?threadID=650196
http://forum.java.sun.com/thread.jspa?threadID=650958
http://forum.java.sun.com/thread.jspa?threadID=655214
http://forum.java.sun.com/thread.jspa?threadID=655229
http://forum.java.sun.com/thread.jspa?threadID=655231 -
[SOLVED] Need a little help with ACPI handler.sh script.
By using ACPI I'm trying to get my laptop to hibernate at critical power state. So far I've made a few test scripts to test how to do this, with one of these scripts I'm stuck. My scripting skills are not that good to solve it.
This is the script:
if [ `awk '{print $3}' /proc/acpi/battery/C1E9/state` == "ok" ]
then
logger "battery is ok"
else
logger "battery is not ok"
fi
If I run the script I get an error (while "battery is not ok" is logged):
┌─[~]
└─> ./test2
./test2: line 1: [: too many arguments
┌─[~]
└─>
When I run the awk-command from the script, I get the following output:
┌─[~]
└─> awk '{print $3}' /proc/acpi/battery/C1E9/state
ok
discharging
2341
1824
10969
┌─[~]
└─>
I think the problem lies in the multiple output of the awk-command, but I'm stuck in solving it.
Any help would be great.
Last edited by NeoXP (2009-11-16 22:40:45)@ skanky
Thanks for the suggestion, but you're right I'm not gonna change a working script. It is working exactly as expected.
@ all
When interested this is my current handler.sh
#!/bin/sh
# Default acpi script that takes an entry for all actions
# NOTE: This is a 2.6-centric script. If you use 2.4.x, you'll have to
# modify it to not use /sys
minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
set $*
case "$1" in
button/power)
echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
button/sleep)
case "$2" in
SLPB) echo -n mem >/sys/power/state ;;
*) logger "ACPI action undefined: $2" ;;
esac
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
battery)
if [ `awk '{print $2}' /proc/acpi/ac_adapter/C1E8/state` == "off-line" ];
then
logger "battery discharging"
if (( `awk '{if (NR==5) {print $3}}' /proc/acpi/battery/C1E9/state` >= "250" ))
then
logger "battery ok"
else
logger "battery not ok"
/usr/sbin/pm-hibernate;
fi
else logger "battery charging"
fi
button/lid)
if [ `awk '{print $2}' /proc/acpi/button/lid/C1ED/state` == "closed" ];
then
logger "ACPI lid closed"
/usr/sbin/pm-suspend
fi
logger "ACPI group/action undefined: $1 / $2"
esac
Still working on it though -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
Invalid hotmail email account, can't solve the problem please help
Hi,
I got an email from my network required update password. I've entered her email address and password repeatedly and received the following message:
Invalid email address or password. Please verify your email address and password. The information you provided is incorrect. If the error persists contact hotmail.com (your email provider). Please try again.
Now I tried this more than 10 times from the blackberry email wizard and from my computer and still received the same messages. Also tried to change new password and set up again However still the same. I have 3 hotmail accounts, another 2 work well except my main email. (all of them are my personal email)
Anyone can help?? Have no idea what wrong with my bb or hotmail. I went to Optus today, one of a staff said Sorry i can't help u as i have no idea about blackberry!!!! please help me.
tried to delete and set up, take battary out ect... still can't set up it.All, please try it again now.
By the way, my guy feeling is this is/was a MSN/Hotmail/Livemail server issue, as only those accounts were affected. Others such as Yahoo, gmail, etc., were not.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
When I click some of the apps that already in my Macbook Pro since the first time I bought this , it show up at the docks but in the next seconds it disappear and the apps won't opened . the apps that can't be opened are App Store , iMovie , PhotoBooth , Calendar , iBooks and lot more . I just use my macbook for just a week and I'm still new on macbook . help me please to solve this
Please what, if any, error messages are displayed after the apps quit.
Maybe you are looking for
-
I restored an iPhone backup that has my old Apple ID
I restored my iPhone 5s today with an old backup that was associated with my old Apple ID and now it is asking for the password to an Apple ID I no longer have. I can't use iCloud on my iPhone now and the phone keeps telling me the password is wrong
-
My ipad is disabled because of too many itemps and I tryed connecting to iTunes but it said nothing on the Apple Support page said it would. What do I do???
-
Help with creating photo albums
Hi Guys.. I'm pretty new to dreamweaver and am using a trial version at the moment but love it so far... My problem is that every time i try to create a jpg photo gallary the and select the source and destination file folder,dreamweaver keeps giving
-
Can MacBook Pro Run Windows Vista?
Hi, Can I run Windows Vista 32/64 bit on MacBook Pro without BootCamp? I saw it use Intel Core 2 Duo as its CPU.
-
Changing web gallery presets (like background colour) and saving fields
Hello all-can this be done and, if so, how? I want to change the "Stock" preset (with a black BG) so that it features a dark grey instead. As well, I want Aperture to remember my studio name, etc.; for now, all that is remembered is copyright info. I