[SOLVED] Kernels from the AUR not compiling properly

Hiya everyone,
I've got a bit of a problem, I think. Early this evening I tried downloading and making the Linux-lqx kernel from the AUR. Largely because why not.
After the tarball downloaded, I ran tar -xvf on it like I always do, ran namcap on the PKGBUILD (it came up with a few superfluous errors), and ran makepkg -s on the PKGBUILD. It downloaded the relevant source, then immediately failed the PGP signature check. I was like, "Oh you AUR!" and ran makepkg -s --skippgpcheck. It did it's thing until it was applying patches, at which point it just failed at a certain point with "ERROR: A failure occured in prepare()", and aborted. I reported the error and the lines that preceded it in the package's page in the AUR.
I got suspicious, and tried the Linux-lbre-xen kernel to test the building of it. Same issue: a prepare() error. Baffled, I thought maybe my building system was broken. I recompiled a few packages I had already built and installed successfully, and they were fine. I grabbed a few more tarballs from the AUR: adobe-air, I think jre, and something else. They all compiled great and installed just fine. Confused, I then tried building Linux-ck. Another prepare() error!
Then I noticed the line that preceded the error, "patching file virt/kvm/kvm_main.c", then the error. Going back to lqx and libre-xen, I tried compiling them again, and sure enough "patching file virt/kvm/kvm_main.c" directly preceded the prepare() error.
What's going on here? Strangely, every kernel I try from the AUR fails the PGP signature check, too. Just the kernels - everything else works as expected. Am I missing something?
Last edited by MrEvilBreakfast (2015-05-24 18:59:02)

The build goes fine until:
==> Starting prepare()...
The next patch would create the file Documentation/ABI/testing/debugfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/ABI/testing/sysfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
The next patch would create the file Documentation/filesystems/aufs/README,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/01intro.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/02struct.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03atomic_open.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03lookup.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/04branch.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/05wbr_policy.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06fhsm.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06mmap.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06xattr.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/07export.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/08shwh.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/10dynop.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/99plan.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/kernel-parameters.txt
patching file Documentation/networking/scaling.txt
The next patch would create the file Documentation/scheduler/sched-BFS.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/scsi/link_power_management_policy.txt
patching file Documentation/sysctl/kernel.txt
The next patch would create the file Documentation/tp_smapi.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/virtual/kvm/devices/s390_flic.txt
patching file MAINTAINERS
patching file Makefile
patching file arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
patching file arch/arm/boot/dts/at91-sama5d3_xplained.dts
patching file arch/arm/boot/dts/dove.dtsi
patching file arch/arm/boot/dts/exynos5250-spring.dts
patching file arch/arm/boot/dts/imx23-olinuxino.dts
patching file arch/arm/boot/dts/imx25.dtsi
patching file arch/arm/boot/dts/imx28.dtsi
patching file arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
patching file arch/arm/boot/dts/omap3-n900.dts
patching file arch/arm/boot/dts/ste-dbx5x0.dtsi
patching file arch/arm/boot/dts/ste-href.dtsi
patching file arch/arm/boot/dts/ste-snowball.dts
patching file arch/arm/include/asm/elf.h
patching file arch/arm/include/uapi/asm/kvm.h
patching file arch/arm/kernel/Makefile
patching file arch/arm/kernel/hibernate.c
patching file arch/arm/kernel/process.c
The next patch would create the file arch/arm/kernel/psci-call.S,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kernel/psci.c
The next patch would create the file arch/arm/kernel/reboot.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kvm/arm.c
patching file arch/arm/mach-mvebu/pmsu.c
patching file arch/arm/mach-omap2/prm-regbits-34xx.h
patching file arch/arm/mach-omap2/prm-regbits-44xx.h
patching file arch/arm/mach-omap2/vc.c
patching file arch/arm/mach-omap2/vc.h
patching file arch/arm/mach-omap2/vc3xxx_data.c
patching file arch/arm/mach-omap2/vc44xx_data.c
patching file arch/arm/mach-s3c64xx/crag6410.h
patching file arch/arm/mach-s3c64xx/mach-crag6410.c
patching file arch/arm/net/bpf_jit_32.c
patching file arch/arm64/Kconfig
patching file arch/arm64/Makefile
patching file arch/arm64/include/asm/cpufeature.h
patching file arch/arm64/include/asm/smp_plat.h
patching file arch/arm64/include/uapi/asm/kvm.h
patching file arch/arm64/kernel/cpu_errata.c
patching file arch/arm64/kernel/entry.S
patching file arch/arm64/kernel/head.S
patching file arch/arm64/kernel/setup.c
patching file arch/arm64/kernel/smp.c
patching file arch/arm64/mm/dma-mapping.c
patching file arch/c6x/kernel/time.c
patching file arch/mips/Kconfig
patching file arch/mips/Makefile
patching file arch/mips/bcm47xx/board.c
patching file arch/mips/bcm63xx/prom.c
patching file arch/mips/bcm63xx/setup.c
patching file arch/mips/cavium-octeon/dma-octeon.c
patching file arch/mips/cavium-octeon/setup.c
patching file arch/mips/include/asm/asm-eva.h
patching file arch/mips/include/asm/cacheflush.h
patching file arch/mips/include/asm/cpu-features.h
patching file arch/mips/include/asm/elf.h
patching file arch/mips/include/asm/fpu.h
patching file arch/mips/include/asm/kvm_host.h
patching file arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
patching file arch/mips/include/asm/octeon/cvmx.h
patching file arch/mips/include/asm/octeon/pci-octeon.h
patching file arch/mips/include/asm/pgtable.h
patching file arch/mips/include/asm/r4kcache.h
patching file arch/mips/include/asm/spinlock.h
patching file arch/mips/kernel/entry.S
patching file arch/mips/kernel/smp-cps.c
patching file arch/mips/kernel/unaligned.c
patching file arch/mips/kvm/emulate.c
patching file arch/mips/kvm/mips.c
patching file arch/mips/kvm/trap_emul.c
patching file arch/mips/loongson/loongson-3/irq.c
patching file arch/mips/mm/cache.c
patching file arch/mips/mm/tlbex.c
patching file arch/mips/mti-malta/malta-memory.c
patching file arch/mips/netlogic/xlp/ahci-init-xlp2.c
patching file arch/mips/pci/Makefile
patching file arch/mips/pci/pci-octeon.c
patching file arch/mips/pci/pcie-octeon.c
patching file arch/mips/power/hibernate.S
patching file arch/mips/ralink/Kconfig
patching file arch/powerpc/kernel/cacheinfo.c
patching file arch/powerpc/mm/hugetlbpage.c
patching file arch/powerpc/perf/callchain.c
patching file arch/powerpc/platforms/cell/interrupt.c
patching file arch/powerpc/platforms/cell/iommu.c
patching file arch/powerpc/platforms/cell/spufs/sched.c
patching file arch/powerpc/platforms/powernv/pci-ioda.c
patching file arch/s390/kernel/suspend.c
patching file arch/s390/kvm/interrupt.c
patching file arch/s390/kvm/kvm-s390.h
patching file arch/s390/kvm/priv.c
patching file arch/x86/Kconfig
patching file arch/x86/Kconfig.cpu
patching file arch/x86/Makefile_32.cpu
patching file arch/x86/include/asm/insn.h
patching file arch/x86/include/asm/mwait.h
patching file arch/x86/include/asm/pvclock.h
patching file arch/x86/include/asm/spinlock.h
patching file arch/x86/kernel/acpi/boot.c
patching file arch/x86/kernel/apic/io_apic.c
patching file arch/x86/kernel/cpu/intel.c
patching file arch/x86/kernel/cpu/perf_event_intel_ds.c
patching file arch/x86/kernel/early_printk.c
patching file arch/x86/kernel/ioport.c
patching file arch/x86/kernel/process.c
patching file arch/x86/kernel/pvclock.c
patching file arch/x86/kvm/vmx.c
patching file arch/x86/kvm/x86.c
patching file arch/x86/lib/insn.c
patching file arch/x86/lib/usercopy_64.c
patching file arch/x86/pci/acpi.c
patching file arch/x86/platform/efi/early_printk.c
patching file arch/x86/tools/test_get_len
patching file arch/x86/vdso/vclock_gettime.c
patching file arch/xtensa/Kconfig
patching file arch/xtensa/include/uapi/asm/unistd.h
patching file arch/xtensa/platforms/iss/network.c
patching file arch/xtensa/platforms/xtfpga/Makefile
patching file arch/xtensa/platforms/xtfpga/include/platform/hardware.h
patching file arch/xtensa/platforms/xtfpga/include/platform/lcd.h
patching file arch/xtensa/platforms/xtfpga/lcd.c
patching file block/Kconfig.iosched
patching file block/Makefile
The next patch would create the file block/bfq-cgroup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-ioc.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-iosched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-sched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file block/blk-core.c
patching file block/blk-mq.c
patching file block/blk-sysfs.c
patching file drivers/accessibility/braille/braille_console.c
patching file drivers/acpi/acpi_pnp.c
patching file drivers/acpi/acpica/acmacros.h
patching file drivers/acpi/acpica/dsopcode.c
patching file drivers/acpi/acpica/evgpe.c
patching file drivers/acpi/acpica/evregion.c
patching file drivers/acpi/acpica/exdump.c
patching file drivers/acpi/acpica/exfldio.c
patching file drivers/acpi/acpica/exregion.c
patching file drivers/acpi/acpica/hwgpe.c
patching file drivers/acpi/acpica/hwvalid.c
patching file drivers/acpi/acpica/nsdump.c
patching file drivers/acpi/acpica/tbdata.c
patching file drivers/acpi/acpica/tbinstal.c
patching file drivers/acpi/acpica/tbprint.c
patching file drivers/acpi/acpica/tbxfroot.c
patching file drivers/acpi/acpica/utaddress.c
patching file drivers/acpi/blacklist.c
patching file drivers/acpi/resource.c
patching file drivers/acpi/sbs.c
patching file drivers/acpi/sbshc.c
patching file drivers/acpi/scan.c
patching file drivers/ata/acard-ahci.c
patching file drivers/ata/ahci.c
patching file drivers/ata/ahci.h
patching file drivers/ata/libahci.c
patching file drivers/ata/libahci_platform.c
patching file drivers/ata/libata-core.c
patching file drivers/ata/libata-eh.c
patching file drivers/ata/libata-pmp.c
patching file drivers/ata/libata-scsi.c
patching file drivers/ata/libata.h
patching file drivers/ata/sata_highbank.c
patching file drivers/base/bus.c
patching file drivers/base/cacheinfo.c
patching file drivers/base/platform.c
patching file drivers/block/loop.c
patching file drivers/block/rbd.c
patching file drivers/bluetooth/ath3k.c
patching file drivers/bluetooth/btusb.c
patching file drivers/char/tpm/tpm-chip.c
patching file drivers/clk/at91/clk-usb.c
patching file drivers/clk/qcom/clk-rcg.c
patching file drivers/clk/qcom/clk-rcg.h
patching file drivers/clk/qcom/clk-rcg2.c
patching file drivers/clk/qcom/gcc-ipq806x.c
patching file drivers/clk/qcom/lcc-ipq806x.c
patching file drivers/clk/samsung/clk-exynos4.c
patching file drivers/clk/tegra/clk-tegra124.c
patching file drivers/clk/tegra/clk.c
patching file drivers/cpufreq/cpufreq.c
patching file drivers/cpufreq/cpufreq_conservative.c
patching file drivers/cpufreq/cpufreq_ondemand.c
patching file drivers/cpufreq/intel_pstate.c
patching file drivers/crypto/omap-aes.c
patching file drivers/gpio/gpio-mvebu.c
patching file drivers/gpio/gpiolib-sysfs.c
patching file drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
patching file drivers/gpu/drm/drm_irq.c
patching file drivers/gpu/drm/exynos/exynos_dp_core.c
patching file drivers/gpu/drm/exynos/exynos_drm_fimd.c
The next patch would create the file drivers/gpu/drm/exynos/exynos_drm_fimd.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/gpu/drm/i2c/adv7511.c
patching file drivers/gpu/drm/i915/i915_drv.c
patching file drivers/gpu/drm/i915/i915_irq.c
patching file drivers/gpu/drm/i915/i915_reg.h
patching file drivers/gpu/drm/i915/intel_display.c
patching file drivers/gpu/drm/i915/intel_dp.c
patching file drivers/gpu/drm/i915/intel_i2c.c
patching file drivers/gpu/drm/i915/intel_lvds.c
patching file drivers/gpu/drm/radeon/atombios_crtc.c
patching file drivers/gpu/drm/radeon/atombios_encoders.c
patching file drivers/gpu/drm/radeon/dce6_afmt.c
patching file drivers/gpu/drm/radeon/evergreen_hdmi.c
patching file drivers/gpu/drm/radeon/r600_hdmi.c
patching file drivers/gpu/drm/radeon/radeon_asic.c
patching file drivers/gpu/drm/radeon/radeon_asic.h
patching file drivers/gpu/drm/radeon/radeon_audio.c
patching file drivers/gpu/drm/radeon/radeon_connectors.c
patching file drivers/gpu/drm/radeon/radeon_cs.c
patching file drivers/gpu/drm/radeon/radeon_ttm.c
patching file drivers/gpu/drm/radeon/radeon_uvd.c
patching file drivers/gpu/drm/radeon/radeon_vce.c
patching file drivers/gpu/drm/radeon/radeon_vm.c
patching file drivers/gpu/drm/radeon/rv770d.h
patching file drivers/gpu/drm/radeon/si_dpm.c
patching file drivers/gpu/drm/radeon/uvd_v1_0.c
patching file drivers/gpu/drm/radeon/uvd_v2_2.c
patching file drivers/hid/Kconfig
patching file drivers/hid/Makefile
patching file drivers/hid/hid-ids.h
patching file drivers/hid/hid-multitouch.c
The next patch would create the file drivers/hid/huiontablet.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/hid/usbhid/hid-quirks.c
patching file drivers/hv/channel.c
patching file drivers/hv/channel_mgmt.c
patching file drivers/i2c/busses/i2c-rk3x.c
patching file drivers/i2c/i2c-core.c
patching file drivers/i2c/i2c-mux.c
patching file drivers/idle/intel_idle.c
patching file drivers/infiniband/core/cma.c
patching file drivers/infiniband/core/umem.c
patching file drivers/infiniband/hw/mlx4/qp.c
patching file drivers/infiniband/ulp/iser/iser_initiator.c
patching file drivers/infiniband/ulp/isert/ib_isert.c
patching file drivers/input/input-mt.c
patching file drivers/input/joydev.c
patching file drivers/input/mouse/alps.c
patching file drivers/input/mouse/elantech.c
patching file drivers/input/mouse/elantech.h
patching file drivers/input/mouse/synaptics.c
patching file drivers/input/mouse/synaptics.h
patching file drivers/macintosh/Kconfig
patching file drivers/macintosh/adbhid.c
patching file drivers/md/md.c
patching file drivers/md/raid0.c
patching file drivers/media/platform/marvell-ccic/mcam-core.c
patching file drivers/media/platform/marvell-ccic/mcam-core.h
patching file drivers/media/rc/img-ir/img-ir-core.c
patching file drivers/media/usb/stk1160/stk1160-v4l.c
patching file drivers/memstick/core/mspro_block.c
patching file drivers/mfd/mfd-core.c
patching file drivers/mmc/card/block.c
patching file drivers/mmc/card/queue.c
patching file drivers/mmc/card/queue.h
patching file drivers/mmc/core/core.c
patching file drivers/mmc/host/sh_mmcif.c
patching file drivers/mmc/host/sunxi-mmc.c
patching file drivers/mmc/host/tmio_mmc_pio.c
patching file drivers/mtd/ubi/attach.c
patching file drivers/mtd/ubi/cdev.c
patching file drivers/mtd/ubi/eba.c
patching file drivers/mtd/ubi/wl.c
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
patching file drivers/net/ethernet/cadence/macb.c
patching file drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
patching file drivers/net/ethernet/intel/e1000/e1000_main.c
patching file drivers/net/ethernet/marvell/pxa168_eth.c
patching file drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
patching file drivers/net/ethernet/mellanox/mlx4/en_netdev.c
patching file drivers/net/ethernet/mellanox/mlx4/en_rx.c
patching file drivers/net/ethernet/mellanox/mlx4/en_tx.c
patching file drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
patching file drivers/net/netconsole.c
patching file drivers/net/ppp/ppp_generic.c
patching file drivers/net/vxlan.c
patching file drivers/net/wireless/hostap/hostap.h
patching file drivers/net/wireless/hostap/hostap_ap.c
patching file drivers/net/wireless/hostap/hostap_config.h
patching file drivers/net/wireless/hostap/hostap_hw.c
patching file drivers/net/wireless/hostap/hostap_info.c
patching file drivers/net/wireless/hostap/hostap_ioctl.c
patching file drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
patching file drivers/net/wireless/ti/wl18xx/debugfs.c
patching file drivers/net/wireless/ti/wlcore/debugfs.h
patching file drivers/nfc/st21nfcb/i2c.c
patching file drivers/pinctrl/core.c
patching file drivers/pinctrl/core.h
patching file drivers/pinctrl/devicetree.c
patching file drivers/platform/x86/Kconfig
patching file drivers/platform/x86/Makefile
patching file drivers/platform/x86/compal-laptop.c
patching file drivers/platform/x86/hdaps.c
The next patch would create the file drivers/platform/x86/thinkpad_ec.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/platform/x86/tp_smapi.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/power/ipaq_micro_battery.c
patching file drivers/power/lp8788-charger.c
patching file drivers/power/twl4030_madc_battery.c
patching file drivers/rtc/rtc-armada38x.c
patching file drivers/scsi/3w-9xxx.c
patching file drivers/scsi/3w-9xxx.h
patching file drivers/scsi/3w-sas.c
patching file drivers/scsi/3w-sas.h
patching file drivers/scsi/3w-xxxx.c
patching file drivers/scsi/3w-xxxx.h
patching file drivers/scsi/megaraid/megaraid_sas_fusion.c
patching file drivers/scsi/mvsas/mv_sas.c
patching file drivers/scsi/scsi_devinfo.c
patching file drivers/scsi/scsi_scan.c
patching file drivers/scsi/sd.c
patching file drivers/scsi/sd_dif.c
patching file drivers/scsi/storvsc_drv.c
patching file drivers/spi/spi-imx.c
patching file drivers/spi/spidev.c
patching file drivers/ssb/Kconfig
patching file drivers/staging/Kconfig
patching file drivers/staging/Makefile
patching file drivers/staging/android/sync.c
patching file drivers/staging/panel/panel.c
The next patch would create the file drivers/staging/vhba/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/vhba.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/staging/vt6655/rxtx.c
patching file drivers/target/iscsi/iscsi_target.c
patching file drivers/target/iscsi/iscsi_target_erl0.c
patching file drivers/target/iscsi/iscsi_target_login.c
patching file drivers/target/target_core_file.c
patching file drivers/target/target_core_sbc.c
patching file drivers/target/target_core_transport.c
patching file drivers/tty/Kconfig
patching file drivers/tty/hvc/hvc_xen.c
patching file drivers/tty/serial/8250/8250_core.c
patching file drivers/tty/serial/8250/8250_dw.c
patching file drivers/tty/serial/8250/8250_early.c
patching file drivers/tty/serial/atmel_serial.c
patching file drivers/tty/serial/imx.c
patching file drivers/tty/serial/of_serial.c
patching file drivers/tty/serial/uartlite.c
patching file drivers/tty/serial/xilinx_uartps.c
patching file drivers/tty/vt/vt.c
patching file drivers/usb/chipidea/otg_fsm.c
patching file drivers/usb/class/cdc-acm.c
patching file drivers/usb/class/cdc-wdm.c
patching file drivers/usb/core/hub.c
patching file drivers/usb/dwc2/hcd.c
patching file drivers/usb/gadget/legacy/printer.c
patching file drivers/usb/host/ehci-hcd.c
patching file drivers/usb/host/ehci-hub.c
patching file drivers/usb/host/fotg210-hcd.c
patching file drivers/usb/host/fusbh200-hcd.c
patching file drivers/usb/host/isp116x-hcd.c
patching file drivers/usb/host/oxu210hp-hcd.c
patching file drivers/usb/host/r8a66597-hcd.c
patching file drivers/usb/host/sl811-hcd.c
patching file drivers/usb/host/uhci-hub.c
patching file drivers/usb/host/xhci-ring.c
patching file drivers/usb/isp1760/isp1760-hcd.c
patching file drivers/usb/musb/musb_core.c
patching file drivers/usb/musb/musb_virthub.c
patching file drivers/usb/phy/phy.c
patching file drivers/usb/storage/uas-detect.h
patching file drivers/usb/storage/uas.c
patching file drivers/usb/storage/usb.c
patching file drivers/vfio/vfio.c
patching file drivers/video/logo/Kconfig
patching file drivers/video/logo/Makefile
patching file drivers/video/logo/logo.c
The next patch would create the file drivers/video/logo/logo_arch_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_bsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_debian_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_exherbo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fbsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedoraglossy_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedorasimple_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_gentoo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_oldzen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_slackware_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_tits_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_zen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/xen/events/events_2l.c
patching file drivers/xen/events/events_base.c
patching file drivers/xen/xen-pciback/conf_space.c
patching file drivers/xen/xen-pciback/conf_space.h
patching file drivers/xen/xen-pciback/conf_space_header.c
patching file drivers/xen/xenbus/xenbus_probe.c
patching file fs/Kconfig
patching file fs/Makefile
The next patch would create the file fs/aufs/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/aufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/export.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/f_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fhsm.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/finfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fstype.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsplus.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_add.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_del.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_ren.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/iinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/ioctl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/magic.mk,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/mvdown.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/plink.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/poll.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/posix_acl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/procfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rdu.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rwsem.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sbinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/spl.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysrq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vdir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wbr_policy.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xattr.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xino.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file fs/binfmt_elf.c
patching file fs/btrfs/extent-tree.c
patching file fs/btrfs/ioctl.c
patching file fs/btrfs/send.c
patching file fs/btrfs/xattr.c
patching file fs/buffer.c
patching file fs/coredump.c
patching file fs/dcache.c
patching file fs/exec.c
patching file fs/ext4/extents.c
patching file fs/ext4/extents_status.c
patching file fs/ext4/inode.c
patching file fs/ext4/namei.c
patching file fs/file_table.c
patching file fs/hfsplus/xattr.c
patching file fs/inode.c
patching file fs/lockd/svcsubs.c
patching file fs/namei.c
patching file fs/namespace.c
patching file fs/nfs/callback.c
patching file fs/nfs/direct.c
patching file fs/nfs/nfs4xdr.c
patching file fs/nfs/read.c
patching file fs/nfs/write.c
patching file fs/nfsd/nfs4proc.c
patching file fs/nfsd/nfs4state.c
patching file fs/nfsd/nfs4xdr.c
patching file fs/nfsd/nfsctl.c
patching file fs/nfsd/nfsd.h
patching file fs/nilfs2/btree.c
patching file fs/notify/group.c
patching file fs/notify/mark.c
patching file fs/ocfs2/dlm/dlmmaster.c
patching file fs/open.c
patching file fs/pnode.c
patching file fs/pnode.h
patching file fs/proc/base.c
patching file fs/proc/nommu.c
patching file fs/proc/task_mmu.c
patching file fs/proc/task_nommu.c
patching file fs/splice.c
patching file fs/xattr.c
patching file include/acpi/acconfig.h
patching file include/acpi/acpixf.h
patching file include/acpi/actypes.h
patching file include/acpi/platform/acenv.h
patching file include/dt-bindings/clock/tegra124-car-common.h
patching file include/linux/bpf.h
patching file include/linux/cgroup_subsys.h
patching file include/linux/console.h
patching file include/linux/file.h
patching file include/linux/init_task.h
patching file include/linux/ioprio.h
patching file include/linux/jiffies.h
patching file include/linux/libata.h
patching file include/linux/linux_logo.h
patching file include/linux/mm.h
patching file include/linux/mm_types.h
patching file include/linux/mount.h
patching file include/linux/nilfs2_fs.h
patching file include/linux/sched.h
patching file include/linux/sched/prio.h
patching file include/linux/skbuff.h
patching file include/linux/splice.h
The next patch would create the file include/linux/thinkpad_ec.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/linux/usb.h
patching file include/linux/usb_usual.h
patching file include/scsi/scsi_devinfo.h
patching file include/sound/emu10k1.h
patching file include/sound/soc-dapm.h
patching file include/target/iscsi/iscsi_target_core.h
patching file include/target/target_core_base.h
The next patch would create the file include/trace/events/fs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/Kbuild
The next patch would create the file include/uapi/linux/aufs_type.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/nfsd/debug.h
patching file include/uapi/linux/sched.h
patching file include/uapi/linux/vt.h
patching file include/video/samsung_fimd.h
patching file init/Kconfig
patching file init/main.c
patching file kernel/bpf/core.c
patching file kernel/bpf/verifier.c
patching file kernel/debug/kdb/kdb_io.c
patching file kernel/delayacct.c
patching file kernel/exit.c
patching file kernel/fork.c
patching file kernel/printk/printk.c
patching file kernel/ptrace.c
patching file kernel/sched/Makefile
The next patch would create the file kernel/sched/bfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file kernel/sched/bfs_sched.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file kernel/sched/core.c
patching file kernel/sched/deadline.c
patching file kernel/sched/fair.c
patching file kernel/sched/idle.c
patching file kernel/sched/stats.c
patching file kernel/stop_machine.c
patching file kernel/sysctl.c
patching file kernel/time/Kconfig
patching file kernel/time/posix-cpu-timers.c
patching file kernel/trace/ring_buffer.c
patching file kernel/trace/trace_events.c
patching file kernel/trace/trace_functions_graph.c
patching file kernel/trace/trace_selftest.c
patching file lib/Kconfig.debug
patching file lib/string.c
patching file mm/Makefile
patching file mm/filemap.c
patching file mm/huge_memory.c
patching file mm/hugetlb.c
patching file mm/madvise.c
patching file mm/memory-failure.c
patching file mm/memory.c
patching file mm/mempolicy.c
patching file mm/mmap.c
patching file mm/msync.c
patching file mm/nommu.c
patching file mm/page-writeback.c
The next patch would create the file mm/prfile.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file net/bridge/br_netfilter.c
patching file net/core/dev.c
patching file net/core/skbuff.c
patching file net/ethernet/eth.c
patching file net/ipv4/Kconfig
patching file net/ipv4/geneve.c
patching file net/ipv4/ip_forward.c
patching file net/ipv4/ping.c
patching file net/ipv4/route.c
patching file net/ipv4/tcp_output.c
patching file net/mac80211/mlme.c
patching file net/netlink/af_netlink.c
patching file scripts/mkcompile_h
patching file security/commoncap.c
patching file security/device_cgroup.c
patching file security/security.c
patching file sound/oss/sequencer.c
patching file sound/pci/emu10k1/emu10k1.c
patching file sound/pci/emu10k1/emu10k1_callback.c
patching file sound/pci/emu10k1/emu10k1_main.c
patching file sound/pci/emu10k1/emupcm.c
patching file sound/pci/emu10k1/emuproc.c
patching file sound/pci/emu10k1/memory.c
patching file sound/pci/hda/hda_codec.c
patching file sound/pci/hda/patch_realtek.c
patching file sound/pci/hda/thinkpad_helper.c
patching file sound/soc/codecs/cs4271.c
patching file sound/soc/codecs/pcm512x.c
patching file sound/soc/codecs/rt5677.c
patching file sound/soc/codecs/tfa9879.c
patching file sound/soc/codecs/wm8741.c
patching file sound/soc/davinci/davinci-evm.c
patching file sound/soc/samsung/s3c24xx-i2s.c
patching file sound/synth/emux/emux_oss.c
patching file sound/synth/emux/emux_seq.c
patching file sound/usb/quirks.c
patching file tools/lib/traceevent/kbuffer-parse.c
patching file tools/perf/config/Makefile
patching file tools/perf/tests/make
patching file tools/perf/util/cloexec.c
patching file tools/perf/util/cloexec.h
patching file tools/perf/util/symbol-elf.c
patching file tools/power/x86/turbostat/Makefile
patching file virt/kvm/arm/vgic.c
patching file virt/kvm/kvm_main.c
==> ERROR: A failure occurred in prepare().
Aborting...
Last edited by MrEvilBreakfast (2015-05-24 17:08:08)

Similar Messages

  • Why do files (UPS labels) from the Internet not print properly (they used to), unless they're saved as PDFs and then printed?

    Files from the Internet (for example a UPS label) no longer print properly (too light, faded out), whereas they used to print just fine directly from the Internet source. The only way they print properly now is to save the file as a PDF and print from that. So I'm think it's not the Canon printer. This hasn't happened before, and I'd like to know what I can do about it, what's going on. This is via Firefox and Safari on my Mac laptop, OS 10.6.8.
    Thanks, David Smoak

    2) Thanks for the tip. It isn't what I had in mind, but writing scripts to do the work (via tells to "System Events") and then invoking those scripts with osascript is indeed a reasonable solution.
    3) You may not have understood me. The only peculiarity is that I sometimes see "Enable Folder Actions" in the menu even when Folder Actions are, in fact, globally enabled, so that I should instead be seeing "Disable Folder Actions" along with "Remove a Folder Action" and so forth. As you say, I always see "Configure Folder Actions...". Surely this is just a minor bug.
    As far as the main issue, I don't believe I have any code that activates the Finder. My original message has a sample of one of my scripts, and you can see that it doesn't mention the Finder at all. As I said, I get the same behavior with the sample Folder Action scripts in /Library. As one more test, I tried a absolutely empty script---the Script Editor window contains not a single glyph when I save it. If I attach this completely empty script as a Folder Action to a folder, any addition or deletion from that folder activates the Finder, though nothing else happens. Still looking for help on this one!

  • Deleting mail from the server - not working properly

    Hello all,
    I usually remove all spam from the mail server as soon as it comes in to avoid it arriving in all our office mailboxes.
    Since upgrading to Leopard, I've run into some hickups.
    After going to apple-i, I select the spam messages, click on 'delete from server', confirm this in the pop-up window... after which nothing happens. While I should get an updated list of messages on the server, and a new number and size of messages in the bottom left corner.
    I sometimes have to repeat the procedure two or more times before the selected messages are deleted.
    Anyone else having the same problem?
    Lianne

    No-one experiencing the same problem??

  • I am not able to install screen-git from the aur

    So yeah, i cant install screen-git from the aur. Im using yaourt.
    ┌─[yamifrankc]──(~)
    └─| % > aur -S screen-git
    ==> Resuming previous build
    ==> Downloading screen-git PKGBUILD from AUR...
    tar: Record size = 13 blocks
    ==> Last 5 comments ordered by date (asc):
    Comment by: dolby on Tue, 16 Jun 2009 15:02:25 +0000
    GNU screen shouldnt depend on libelf. Package in extra now doesnt.
    See http://bugs.archlinux.org/task/14700
    Comment by: dolby on Tue, 16 Jun 2009 15:03:08 +0000
    Oh yeah, gpm isnt a dependency either.
    Comment by: nihathrael on Tue, 16 Jun 2009 16:23:56 +0000
    Thanks for the pointers. Package updated.
    Comment by: firecat53 on Tue, 16 Jun 2009 23:19:28 +0000
    At least for x86_64, libelf seems to be a dependency. Throws an error about libelf.so.0 when starting screen if it's not installed.
    Comment by: Ranguvar on Sun, 11 Oct 2009 04:00:10 +0000
    The three lines at the end of the install scriplet are unnecessary now and can cause problems apparently, please remove :)
    Also, I cannot confirm libelf dependency, both by using ldd and trying removing libelf, so it should be kept out.
    First Submitted: Sun, 09 Nov 2008 15:43:42 +0000
    screen-git 20090616-1 : GNU Screen from GIT repository. Provides vertical splitting.
    ( Unsupported package: Potentally dangerous ! )
    ==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
    ==> ----------------------------------------------
    ==>n
    ==> screen-git dependencies:
    - ncurses (already installed)
    - shadow (already installed)
    - git (already installed)
    - automake (already installed)
    - autoconf (already installed)
    ==> WARNING: This PKGBUILD contains install file that can be dangerous.
    screen.install
    ==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
    ==> ----------------------------------------------
    ==>y
    Please add EDITOR to your environment variables
    for example:
    ==> Edit PKGBUILD with:(replace gvim with your favorite editor)
    ==> Edit screen.install with:vim
    ==> WARNING: This PKGBUILD contains install file that can be dangerous.
    screen.install
    ==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
    ==> ----------------------------------------------
    ==>n
    ==> Continue the building of screen-git ? [Y/n]
    ==> ----------------------------------------------
    ==>y
    ==> Install or build missing dependencies for screen-git:
    ==> Building and installing package
    mkdir: cannot create directory `/var/abs': Permission denied
    ==> WARNING: Unable to write in /var/abs/local/yaourtbuild/screen-git directory. Using /tmp directory
    ==> screen-git dependencies:
    - ncurses (already installed)
    - shadow (already installed)
    - git (already installed)
    - automake (already installed)
    - autoconf (already installed)
    ==> Determining latest git revision...
    -> Version found: 20091204
    ==> Making package: screen-git 20091204-1 i686 (Fri Dec 4 07:43:16 CST 2009)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Found screen.pam in build dir
    ==> Validating source files with md5sums...
    screen.pam ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Entering fakeroot environment...
    ==> Starting build()...
    ==> Connecting to GIT server....
    Already up-to-date.
    ==> The local files are updated.
    ==> GIT checkout done or server timeout
    ==> Starting make...
    autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
    autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
    autoheader: WARNING: is deprecated and discouraged.
    autoheader:
    autoheader: WARNING: Using the third argument of `AC_DEFINE' and
    autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
    autoheader: WARNING: `acconfig.h':
    autoheader:
    autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
    autoheader: [Define if a function `main' is needed.])
    autoheader:
    autoheader: WARNING: More sophisticated templates can also be produced, see the
    autoheader: WARNING: documentation.
    configure: WARNING: unrecognized options: --with-sys-screenrc
    this is screen version 4.1.0
    checking for gcc... gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking how to run the C preprocessor... gcc -E
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking whether gcc needs -traditional... no
    checking for library containing strerror... none required
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking minix/config.h usability... no
    checking minix/config.h presence... no
    checking for minix/config.h... no
    checking whether it is safe to define __EXTENSIONS__... yes
    checking for gawk... gawk
    checking for a BSD-compatible install... /bin/install -c
    configure: checking for buggy tools...
    - sh is 'GNU bash, version 4.0.35(2)-release (i686-pc-linux-gnu)'.
    - sed is 'GNU sed version 4.2.1'.
    checking if a system-wide socket dir should be used... yes
    checking for the socket dir... (eff_uid ? "/tmp/uscreens" : "/tmp/screens")
    configure: checking for MIPS...
    configure: checking for Ultrix...
    configure: checking for butterfly...
    configure: checking for POSIX.1...
    - you have a POSIX system
    configure: checking for System V...
    configure: checking for sequent/ptx...
    configure: checking SVR4...
    checking stropts.h usability... yes
    checking stropts.h presence... yes
    checking for stropts.h... yes
    checking for string.h... (cached) yes
    checking for strings.h... (cached) yes
    configure: checking for Solaris 2.x...
    configure: checking BSD job jontrol...
    - you have jobcontrol
    configure: checking setresuid...
    configure: checking setreuid...
    configure: checking seteuid...
    configure: checking select...
    configure: checking fifos...
    - your fifos are usable
    configure: checking for broken fifo implementation...
    - your implementation is ok
    configure: checking sockets...
    - your sockets are usable
    configure: checking socket implementation...
    - you are normal
    - both sockets and fifos usable. let's take sockets.
    configure: checking select return value...
    - select is ok
    configure: checking for tgetent...
    configure: checking libcurses...
    - you use the terminfo database
    configure: checking ospeed...
    configure: checking for /dev/ptc...
    configure: checking for SVR4 ptys...
    checking for getpt... yes
    configure: checking for ptyranges...
    configure: checking default tty permissions/group...
    checking for write... /usr/bin/write
    checking for xterm... /usr/bin/xterm
    - pty mode: 0620, group: 0
    configure: checking getutent...
    configure: checking ut_host...
    checking utempter.h usability... no
    checking utempter.h presence... no
    checking for utempter.h... no
    configure: checking for libutil(s)...
    configure: checking getloadavg...
    assuming posix signal definition
    configure: checking for crypt and sec libraries...
    configure: checking crypt...
    configure: checking IRIX sun library...
    configure: checking syslog...
    configure: checking wait union...
    configure: checking for termio or termios...
    configure: checking getspnam...
    configure: checking getttyent...
    configure: checking fdwalk...
    configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
    checking for long file names... yes
    checking for vsprintf... yes
    checking for dirent.h that defines DIR... yes
    checking for library containing opendir... none required
    checking for setenv... checking for nl_langinfo(CODESET)... yes
    checking for library containing gethostname... none required
    checking for rename... yes
    checking for fchmod... yes
    checking for fchown... yes
    checking for strerror... yes
    checking for lstat... yes
    checking for _exit... yes
    checking for utimes... yes
    checking for vsnprintf... yes
    checking for getcwd... yes
    checking for setlocale... yes
    checking for strftime... yes
    checking for PAM support... yes
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating doc/Makefile
    config.status: creating config.h
    config.status: config.h is unchanged
    config.status: executing default commands
    configure: WARNING: unrecognized options: --with-sys-screenrc
    Now please check the pathnames in the Makefile and in the user
    configuration section in config.h.
    Then type 'make' to make screen. Good luck.
    CPP="gcc -E -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"'" srcdir=. sh ./osdef.sh
    AWK=gawk CC="gcc -march=i686 -mtune=generic -O2 -pipe" srcdir=. sh ./comm.sh
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe screen.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe ansi.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe fileio.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe mark.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe misc.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe resize.c
    gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
    -march=i686 -mtune=generic -O2 -pipe socket.c
    In file included from socket.c:51:
    extern.h:159: error: conflicting types for 'execvpe'
    /usr/include/unistd.h:585: note: previous declaration of 'execvpe' was here
    make: *** [socket.o] Error 1
    ==> ERROR: Build Failed.
    Aborting...
    Error: Makepkg was unable to build screen-git package
    Vertical split is ftw! What can i do to build it?

    yeah, i also got that message.
    for vertical split you can go for screen-vs package. this is screen with the vs patch.
    http://aur.archlinux.org/packages.php?ID=6006

  • [SOLVED] Unable to build package Intel-OpenCL-SDK from the AUR

    Good morning,
    I am having some issues in regards to building a package from the AUR: https://aur.archlinux.org/packages/intel-opencl-sdk/
    If I understand correctly this is a 64 bit package, so I made sure that my processor has the LM flag. Also I have checked which kernel I am running:
    >$ uname -m
    x86_64
    When I start building the package it comes up with an error saying:
    ==> ERROR: intel-opencl-sdk is not available for the 'i686' architecture.
    Note that many packages may need a line added to their PKGBUILD
    such as arch=('i686').
    So I went in to the PKGBUILD and changed the line x86_64 to i686. This seemed to started the build, but it does stop working rather soon, giving me the following error:
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    strip:./opt/intel/opencl-sdk/libOclCpuBackEnd.so: File format not recognized
    /usr/bin/fakeroot: line 181: 846 User defined signal 1 FAKEROOTKEY=$FAKEROOTKEY LD_LIBRARY_PATH="$PATHS" LD_PRELOAD="$LIB" "$@"
    So I do not know where it is going wrong, although it also sounds that my install of Arch might be a bit dodgy as he does not want to build the package with the x86_64 setting ...
    Could somebody shed some light on this matter?
    Last edited by ruurdkrekt (2013-04-04 11:09:00)

    Scimmia wrote:No, it's going to need 64 bit versions of the libs it links to. If you want to use this package, you're going to have to reinstall all of your packages. Probably easiest to start from scratch, to be honest.
    So is it possible to update the dependencies to 64bit and then build this package?
    When I change /etc/pacman.conf to take x86_64 architecture packages:
    Architecture = x86_64
    And I change the flags of /etc/makepkg.conf to x86_64:
    CARCH="x86_64"
    CHOST="x86_64-unknown-linux-gnu"
    CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
    CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
    Then when I do pacman -S llvm then it will say:
    error: failed to prepare transaction (package architecture is not valid)
    :: package llvm-3.2-5-i686 does not have a valid architecture
    However I did put everything to x86_64, so where does he get the i686 from?

  • Installing nntpgrab from the AUR

    Hi guys
    I hope you can help me. I tried to install nntpgrab from the AUR using pacaur. However, after some compiling process I get the following error:
    mkdir: cannot create directory ‘/-gtk-target’: Permission denied
    ==> ERROR: A failure occurred in package_nntpgrab-cli().
    Aborting...
    :: nntpgrab cleaned
    How to fix that? I noticed that the package is not maintained any more. Is there anything wrong with the install script?
    Last edited by custo (2015-05-03 13:58:45)

    The package have not been updated for years and needs some major work. I suggest you write a new PKGBUILD
    Edit: Upstream seems to be pretty dead too
    Last edited by Mr.Elendig (2015-05-03 14:37:42)

  • Thermald from the AUR - wrong checksums ?

    Hello,
    I'm trying to install thermald from the AUR : I download the tarball, extract the files with "tar -xvf", go to the extracted directory and run "makepkg -s". This is what I get :
    [quentin@arch thermald]$ makepkg -s
    ==> Création du paquet thermald 1.3.rc1-7 (sam aoû 2 18:20:08 CEST 2014)
    ==> Vérification des dépendances pour l’exécution...
    ==> Vérification des dépendances pour la compilation...
    ==> Récupération des sources...
    -> Téléchargement de thermald-1.3.rc1.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 130 100 130 0 0 116 0 0:00:01 0:00:01 --:--:-- 116
    100 77646 100 77646 0 0 21211 0 0:00:03 0:00:03 --:--:-- 38117
    -> modules-load-thermald.conf trouvé
    -> Téléchargement de 00-hotfix-seqfaults.patch...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 3079 100 3079 0 0 2842 0 0:00:01 0:00:01 --:--:-- 2843
    ==> Validation des fichiers sources avec md5sums...
    thermald-1.3.rc1.tar.gz ... Réussite
    modules-load-thermald.conf ... Réussite
    00-hotfix-seqfaults.patch ... ÉCHEC
    ==> ERREUR : Un ou plusieurs fichiers sont invalides !
    And i've seen in the AUR's comments another person with the same issue. If I had to guess, i'd say the MD5 sums in the PKGBUILD do not match the "00-hotfix-seqfaults.patch" anymore. Is it the problem ? What can I do ?
    Thanks in advance for you help
    SergentPepper
    EDIT (trying to avoid bumping): I've been away for a while, but thanks for your answers
    Last edited by SergentPepper (2014-08-12 19:35:07)

    $ updpkgsums -h
    usage: updpkgsums [buildfile]
    -h, --help display this help message and exit
    -V, --version display version information and exit
    updpkgsums will perform an in place update the checksums in the
    path specified by [buildfile], defaulting to PKGBUILD in the current
    working directory.
    Next time please run
    LC_ALL=C <command>
    to get the output in English.

  • I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Can't install Cinnamon from the AUR

    I can't install the latest CInnamon from the AUR on either my desktop PC (xorg-server 1.12, catalyst 12.6) or my laptop (xf86-video-intel, every single package up to date). I get the following error on both computers:
    $ makepkg -csi
    make[3]: Entering directory `/home/dennis/Hämtningar/cinnamon/src/linuxmint-Cinnamon-d421fd9/src'
      CC       libst_1_0_la-st-enum-types.lo
      CC       libst_1_0_la-st-marshal.lo
      CCLD     libst-1.0.la
      CC       libtray_la-na-marshal.lo
      CCLD     libtray.la
      CC       libcinnamon_la-cinnamon-marshal.lo
      CC       libcinnamon_la-cinnamon-enum-types.lo
      CCLD     libcinnamon.la
      CCLD     cinnamon-real
      CCLD     test-theme
      CCLD     run-js-test
      GEN      cinnamon-extension-tool
      GEN      cinnamon
      GEN      hotplug-sniffer/org.Cinnamon.HotplugSniffer.service
      GISCAN Gvc-1.0.gir
    gvc/gvc-mixer-control.h:49: Warning: Gvc: symbol='RECONNECT_DELAY': Unknown namespace for symbol 'RECONNECT_DELAY'
    <unknown>:: Fatal: Gvc: warnings configured as fatal
    <unknown>:: Fatal: Gvc: warnings configured as fatal
    make[3]: *** [Gvc-1.0.gir] Error 1
    make[3]: Leaving directory `/home/dennis/Hämtningar/cinnamon/src/linuxmint-Cinnamon-d421fd9/src'
    make[2]: *** [all] Error 2
    make[2]: Leaving directory `/home/dennis/Hämtningar/cinnamon/src/linuxmint-Cinnamon-d421fd9/src'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/home/dennis/Hämtningar/cinnamon/src/linuxmint-Cinnamon-d421fd9'
    make: *** [all] Error 2
    ==> ERROR: A failure occurred in build().
        Aborting...
    What do I have to do to get it working?
    Last edited by snufkin (2012-11-05 21:01:39)

    karol wrote:
    1. Please use [ code ] tags when pasting code https://bbs.archlinux.org/help.php#bbcode
    2. Please use English
    ==> FEL: Ett fel uppstod i build().
    Avbryter...
    is not English.
    3. Please post in the appropriate section of the forum. I asked the moderators to move it to AUR issues: https://bbs.archlinux.org/viewforum.php?id=38
    Sorry for posting in the wrong section.
    However, since the only error message that is of any importance in English I didn't translate the localised "helpful user output" back to English since it'd probably not be the same as the original strings anyway.

  • Lostfiles script from the AUR

    I recently heard about the lostfiles app and decided to grab it from the AUR to see what my orphaned files situation was like as keeping a clean and tidy file system is something i strive for. Upon running it I found that it lists quite a few things that I cant imagine my system can do without, or at least not very well. It listed things like:
    /etc/X11/xorg.conf.d/xorg.conf
    /etc/sddm.conf
    and various other items that seem quite crucial to my system. I was under the impression "lostfiles" would list things that are safe to remove from the system. Again I'm trying to tidy it up and make sure things that dont need to be on here, aren't. I understand sometimes things will throw false positives, but I'd say 50% or more of the list it spit at me were files crucial to system operation.
    Anyways, just looking to get some input on this script. Am I using it wrong? Not reading into it correctly?

    GunnDawg wrote:
    arojas wrote:lostfiles lists files which are not owned by any package, nothing more, nothing less. It doesn't tell you anything about the importance of those files. Some will be crucial, some will not, that is for you to decide.
    Ah very well. Thank you. I guess it cant quite be used as a means for file system clean up then. Still trying to find the most optimal ways to keep a clean file system.
    You can use the result of lostfiles in your own script. Go through it manually and assign it to a package in your own database. Then the next time you run your script it can filter the output of lostfiles against your list.

  • In my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    in my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    First, make sure the headphones plug is completely pushed into the headphones jack.  Because the jack serves multiple functions, the fit may be tighter than expected (especially if you have the Apple EarPods).
    Also, try using the headphones with another device, to rule out bad headphones.  Or try another set of (known working) headphones with the shuffle.
    Are you using older headphones that have remote control buttons?  Not the latest EarPods and not the immediately previous version of white Apple earbuds.  Or non-Apple headphones with remote control buttons.  It's possible they are not compatible and interfering with the shuffle's operation.  Any standard headphones (with no buttons) should work.
    If that does not help, you can try doing a Restore on the shuffle in iTunes.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, reinstall its software, and set it to defaut settings.  If a software (or settings) problem on the shuffle is the cause, the Restore should fix it.
    Otherwise, if the Restore does not help, it may be a hardware problem.  If it has been less than one year since purchase, it is under warranty.

  • View packages that have moved from the AUR into official repositories

    Is there any way to see packages that have been moved from the AUR to the official repositories in some sort of list? Ive looked through http://www.archlinux.org/packages/ and https://aur.archlinux.org/ with no luck.

    jrussell wrote:Is there any way to see packages that have been moved from the AUR to the official repositories in some sort of list?
    You can do an -Sl on all repos that interest you and output to a file. Then diff with a previous version of the file to see changes.
    Also i recently opened a feature request about having a commits mailing list for all repositories:
    https://bugs.archlinux.org/task/31562 which would make it easier to track all changes in the repos.
    Last edited by dolby (2012-09-25 16:39:02)

  • How to record with "guvcview" from the AUR.

    http://wiki.archlinux.org/index.php/Web … uvcview.29
    In the Archwiki on the webcam page, it suggests GTK UVC Viewer from the AUR. I don't quite like cheese for video recording. I was excited after I played with the resolution and framerate and such in guvcview for the first time. I then was ready to start recording a test video. However, I can't find how to start/stop recording once I've started guvcview. I would appreciate knowing how to record video in it.

    Hi! I just saw this image: http://screenshots.debian.net/screensho … _large.png
    I seem to be missing the bottom row of buttons.
    As I was typing this, I thought to stretch the window down... There they are! Sorry for bothering the forum with such a silly mistake. >.<

  • I got a new iPhone 5 when I went to add my music back from the cloud Not on this iPhone Rihanna for some reason will not re load to my new phone the Little wheel just keeps moving

    I got a new iPhone 5 when I went to add my music back from the cloud Not on this iPhone Rihanna for some reason will not re load to my new phone the Little wheel just keeps moving nothing ever happens.  I turned it off and still nothing
    whats up with that I have one beatles song and one kenny chesney also

    Mate, I'm trying to find out if it was shipped like that or not. If someone else has had the same issue then I can go back to Apple and have them look into it further. If not then as I said Vodafone is selling second hand phones and they will have to replace the phone.
    Vodafone account manager is saying that he has never heard of anything like it.
    So I'm left with one of 3 answers.
    1: The phone was shipped like that so its a factory error.
    2: The Apple genius doesn’t know what he's talking about then I can go back to the store and ask for a second opinion.
    3: Vodafone is selling second hand phones as new.
    I need to narrow it down so I can deal with the account manager appropriately 

  • App "notes" - what do I have to do, if I want to send something from the app "notes" by one of my emails? a specific one

    App "notes" -
    what do I have to do, if I want to send something from the app "notes" by one of my emails? a specific one!
    Example:
    I have email 1, 2 and 3, and from the " notes"  I want to send an email, from the account 3! 
    How can I choose the email account, because it goes always with the name of the account 1.
    The only way I can do it, is erasing the name and put the other!

    Lisboa wrote:
    How can I choose the email account, because it goes always with the name of the account 1.
    The only way I can do it, is erasing the name and put the other!
    Yes, that is how you do it.
    You can change the default email used in Settings > Mail, Contacts, Calendars.

Maybe you are looking for