[Solved][KF5 Plasma] I broke my kwallet service

Hello,
I think I broke my kwallet service between updates and an attemp to reset it.
Few week ago, after an update, kwallet started to ask password any time I wanted to connect to a WIFI network.
As I didn't remember the kwallet password, I clicked "cancel" and entered the WIFI password manually.
Today I looked for method to reset kwallet and I've done this :
rm ~/.config/kwalletrc
mv ~/.local/share/kwalletd ~/.local/share/kwalletd.bak
Now i briefly see the kwallet password window, without any chance to do anything with that window.
And I can't connect WIFI network as it doesn't ask for WIFI password anymore.
kwalletmanager doesn't work :
[thomas@thomas-xps-14:~]$ kwalletmanager
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
[thomas@thomas-xps-14:~]$ kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
kwalletmanager(7331)/kdeui (Wallet): The kwalletd service has been disabled
Installed packakages
[thomas@thomas-xps-14:~]$ pacman -Qs kwallet
local/kdeutils-kwalletmanager 15.04.1-1 (kde-applications kdeutils)
Wallet Management Tool
local/ksshaskpass 5.3.0-3 (plasma)
ssh-add helper that uses kwallet and kpassworddialog
local/kwallet 5.10.0-1 (kf5)
Secure and unified container for user passwords
Is anyone could help me to get kwallet working again, or make the WIFI password prompt appear again ?
Last edited by kanar (2015-05-15 09:03:07)

Working again.
mv .kde4/share/config/kwalletrc .kde4/share/config/kwalletrc.bak
mv .kde4/share/config/kwalletmanagerrc .kde4/share/config/kwalletmanagerrc.bak
Then reboot and it was ok.

Similar Messages

  • [SOLVED] KF5/Plasma won't start without external monitor

    I have connected an external monitor through HDMI, it works fine in plasma5, the only problem is, if HDMI isn't connected I can't start Plasma 5. I just attached the monitor again, disabled it in the setting (the monitor stopped showing any display, but now Plasma gives black screen if HDMI is not connected, but if HDMI cable is connected the laptop screen would turn on just fine.
    I have tried removing the kwinrc and all plasma* from ~/.config but to no avail.
    How can I reset it?
    P.S: I created a new 'test' user, and Plasma works fine with it, so it's not an installation problem but a configuration problem.
    Last edited by aqeeliz (2015-06-18 06:37:53)

    Ya, I run dual monitors on a single nvidia card and on about every second or third reboot, I would end up loging into mirrored screen 1. I would have to disable compositing, reset screens in nvidia-settings, then re-enable compositing. Someone else was complaining about the artifacting and said he cured it by removing those two applications. I figured I could skip the disable and enable of compositing and was pleasantly surprised to find that it also cured the mirrored screen issue too.

  • Service Broker External Activator Service stuck in "Stopping" mode after error 90

    Hi,
    We are using the Service Broker External Activator Service and we've come across an error involving runtime checkpointing and the process not being able to access the EARecovery.rlog file.. it goes like this:
    2014/06/09 10:15 VERBOSE
    Checkpointing recovery log C:\Program Files\Service Broker\External Activator\log\EARecovery.rlog ...
    2014/06/09 10:15 ERROR
    The External Activator service is aborting ...
    2014/06/09 10:15 EXCEPTION
    ERROR = 90, Internal exceptions have occurred when External Activator is runtime checkpointing.
    2014/06/09 10:15 EXCEPTIONDETAILS
    Inner Exception:
    2014/06/09 10:15 EXCEPTIONDETAILS
    System.IO.IOException: The process cannot access the file 'C:\Program Files\Service Broker\External Activator\log\EARecovery.rlog' because it is being used by another process.
    2014/06/09 10:15 EXCEPTIONDETAILS
      at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.LogManager.CompressRecoveryLog(LogRecoveryContext recoveryContext)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.LogManager.Checkpoint(LogRecoveryContext recoveryContext)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.LogManager.Log(LogRecord recoveryLogRec)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.ApplicationMonitor.OnProcessExited(ProcessMonitor processMonitor)
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.ProcessMonitor.NotifySubscriber()
    2014/06/09 10:15 EXCEPTIONDETAILS
      at ExternalActivator.ProcessMonitor.OnProcessExited(Object a, EventArgs b)
    2014/06/09 10:15 VERBOSE
    Heartbeat-Thread is exiting...
    2014/06/09 10:15 VERBOSE
    Waiting for worker threads to finish...
    2014/06/09 14:13 ======
    ================================================================================
    2014/06/09 14:13 ======
    ================================================================================
    This happened a few days ago and we are pretty sure nobody was using the file as this is a production application server... and then it happened again several days later...
    We have to kill the process and restart the service to get things going again.
    Any help would be greatly appreciated as this is not a viable way of doing things for us.
    Thanks
    Gabriel

     and we are pretty sure nobody was using the file as this is a production application server...
    Hello Gabriel,
    Is there maybe an anti-virus software running on the server, which accesses the file at the same time? If so, you may exclude the log file in the AV software.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • [SOLVED] kf5 broke Qt5 Theme Conformance

    I upgraded to KDE Frameworks 5, and Qt5 apps (transmission-qt for example) no longer use qtcurve nor appropriate icons, but rather fall back on what I assume is the default theme and Oxygen icons. It was working fine before kf5.
    I've tried launching with -style=qtcurve, and with QT-STYLE-OVERRIDE=qtcurve; no-go.
    Last edited by nickpcrogers (2014-07-23 20:20:02)

    arojas wrote:Remove frameworkintegration. Unless you use Plasma5, you don't need it.
    Thank you very much good sir!
    I can confirm **this works**.
    Was searching the web for maaany hours for whats causing this.
    Cheers

  • Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

    I got the following problem:
    I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
    Also, SQL Agent Service won't run
    The only change that day was security
    update KB2964444 - Security
    Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
    When I try to start Windows Event Log via net
    start eventlog or via Services
    panel, I get an error:
    C:\Users\Administrator>net start eventlog
    The Windows Event Log service is starting.
    The Windows Event Log service could not be started.
    A system error has occurred.
    System error 2 has occurred.
    The system cannot find the file specified.
    I tried:
    restarted the OS (virtual on the host's VMWare).
    re-checked the settings in services menu -they are like in the link.
    checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
    the identity is NT
    AUTHORITY\LocalService
    gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
    ran fc /scannow - Windows Resource Protection did not find any integrity violations.
    went to the file %windir%\logs\cbs\cbs.log -
    all clean, [SR] Repairing 0 components
    EDIT: Uninstalled the recent system updates and rebooted - didn't help
    EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
    filters:
    process name is svchost.exe : include
    operation contains TCP : exclude
    the events captured are:
    21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
    21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
    21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
    21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
    21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
    21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
    21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
    21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
    21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
    21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
    21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
    NOTE: previoulsy, for
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also got NAME
    NOT FOUND error ,so I created the new string value for the Parameters with
    the name ServiceDll and
    data %SystemRoot%\System32\wevtsvc.dll (copied
    from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
    and this event now is
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also checked for the presence of wevtsvc.dll in
    the place and it's there.
    Also, I tried to capture all events with path containing 'event' and
    got following events firing every several seconds:
    21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
    21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
    21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
    Also, I tried to capture all the events containing 'file',
    excluding w3wp.exe,
    chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
    the event logger (if run from cmd - there are several hits by net executable,
    not present if run from the panel).
    What can be done?

    Hi,
    I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
    The related KB:
    MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
    SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
    http://support.microsoft.com/kb/2961851/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • [SOLVED] Can't make Akonadi server / Nepomuk service run

    I'm currently running KDE SC 4.9 on Arch Linux x86_64, system fully up to date.
    My laptop's HD went dead some days ago so I had to restore my system from a 2-weeks old backup; I usually use fsarchiver to backup root partition and 7z to compress ~/.kde4 and ~/.config so this way I'm covered up about these kind of things.
    So after restoring my system and home folder I did a full upgrade (nearly a gigabyte of downloads) and while most things seems to work well I found that Nepomuk isn't running, when I try to start it manually I have this error message:
    "Failed to start the desktop search service (Nepomuk). The settings have been saved and will be used the next time the server is started."
    Going back to the wiki I did my homework re-configuring Akonadi but so far I can't make Nepomuk run.
    This is what I have:
    ~/.config/akonadi/akonadiserverrc
    [%General]
    Driver=QMYSQL
    [QMYSQL]
    Name=akonadi
    Host=localhost
    ServerPath=/usr/bin/mysqld
    StartServer=true
    User=akonadiuser
    Password=akonadiuser
    Options="UNIX_SOCKET=/home/msx/.local/share/akonadi/socket-heybeavis/mysql.socket"
    [Debug]
    Tracer=null
    The database is already created and configured:
    mysql> show databases;
    +--------------------+
    | Database |
    +--------------------+
    | information_schema |
    | akonadi
    | mysql
    | owncloud
    | performance_schema |
    +--------------------+
    5 rows in set (0.00 sec)
    and the ~/.config/akonadi/mysql-local.conf is in place:
    ~ $ cat ~/.config/akonadi/mysql-local.conf
    # Global Akonadi MySQL server settings,
    # These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
    # Based on advice by Kris Köhntopp <[email protected]>
    [mysqld]
    # strict query parsing/interpretation
    # TODO: make Akonadi work with those settings enabled
    #sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
    sql_mode=strict_trans_tables
    # DEBUGGING:
    # log all queries, useful for debugging but generates an enormous amount of data
    # log=mysql.full
    # log queries slower than n seconds, log file name relative to datadir (for debugging only)
    # log_slow_queries=mysql.slow
    # long_query_time=1
    # log queries not using indices, debug only, disable for production use
    # log_queries_not_using_indexes=1
    # mesure database size and adjust innodb_buffer_pool_size
    # SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
    # NOTES:
    # Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
    #expire_logs_days=3
    #sync_bin_log=0
    # Use UTF-8 encoding for tables
    character_set_server=utf8
    collation_server=utf8_general_ci
    # use InnoDB for transactions and better crash recovery
    default_storage_engine=innodb
    # memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
    innodb_additional_mem_pool_size=1M
    # memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
    # Larger values means less I/O
    innodb_buffer_pool_size=80M
    # Create a .ibd file for each table (default:0)
    innodb_file_per_table=1
    # Write out the log buffer to the log file at each commit (default:1)
    innodb_flush_log_at_trx_commit=2
    # Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
    # larger values means less I/O
    innodb_log_buffer_size=1M
    # Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
    innodb_log_file_size=64M
    # # error log file name, relative to datadir (default:hostname.err)
    log_error=mysql.err
    # print warnings and connection errors (default:1)
    log_warnings=2
    # Convert table named to lowercase
    lower_case_table_names=1
    # Maximum size of one packet or any generated/intermediate string. (default:1M)
    max_allowed_packet=32M
    # Maximum simultaneous connections allowed (default:100)
    max_connections=256
    # The two options below make no sense with prepared statements and/or transactions
    # (make sense when having the same query multiple times)
    # Memory allocated for caching query results (default:0 (disabled))
    query_cache_size=0
    # Do not cache results (default:1)
    query_cache_type=0
    # Do not use the privileges mechanisms
    skip_grant_tables
    # Do not listen for TCP/IP connections at all
    skip_networking
    # The number of open tables for all threads. (default:64)
    table_cache=200
    # How many threads the server should cache for reuse (default:0)
    thread_cache_size=3
    # wait 365d before dropping the DB connection (default:8h)
    wait_timeout=31536000
    [client]
    default-character-set=utf8
    Now, when I do restart Akonadi server I got:
    ~ $ akonadictl restart
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    search paths: ("/usr/local/bin", "/usr/bin", "/bin", "/usr/local/sbin", "/usr/sbin", "/sbin", "/usr/bin/vendor_perl", "/usr/bin/core_perl", "/usr/bin/msx", "/usr/lib/colorgcc/bin", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
    ~ $ akonadi.collectionattributetable OK
    akonadi.collectionmimetyperelation OK
    akonadi.collectionpimitemrelation OK
    akonadi.collectiontable OK
    akonadi.flagtable OK
    akonadi.mimetypetable OK
    akonadi.parttable OK
    akonadi.pimitemflagrelation OK
    akonadi.pimitemtable OK
    akonadi.resourcetable OK
    akonadi.schemaversiontable OK
    Nepomuk Query Server not available
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    search paths: ("/usr/local/bin", "/usr/bin", "/bin", "/usr/local/sbin", "/usr/sbin", "/sbin", "/usr/bin/vendor_perl", "/usr/bin/core_perl", "/usr/bin/msx", "/usr/lib/colorgcc/bin")
    KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
    KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
    "/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
    "/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
    "/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
    "/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
    search paths: ("/home/msx/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/home/msx/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/msx/.kde4/lib/kde4/", "/usr/lib/kde4/")
    AkonadiAgentServer(13913)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    AkonadiAgentServer(13913)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    Please correct me if I'm wrong but seems Akonadi can't/don't create the resource needed by Nepomuk, right?
    "/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
    Already raked the forums and the net but can't find anything of help :(
    * UPDATE *
    1.Further research shows akonadi database is empty so it seems Akonadi isn't connecting to MySQLd.
    2. I created a new user to simplify research and found the very same problem when trying to activate Nepomuk: Failed to start the desktop search service (Nepomuk). The settings have been saved and will be used the next time the server is started.
    From what I remember Akonadi/Nepomuk/Soprano were working well in previous KDE 4.8.4.
    * UPDATE *
    Solved after reinstalling all MySQL stack.
    Regards,
    Martin
    Last edited by msx (2012-08-15 06:33:30)

    msx, please use [ code ]...[ /code ] tags (without the intervening spaces) around your listings. See: https://bbs.archlinux.org/help.php#bbcode

  • [solved] Long boot time because of NetworkManager.service

    Hello. It seems that my ASUS N56V latptop takes a long time to boot. systemd-analyze reports this:
    Startup finished in 742ms (kernel) + 3.094s (initrd) + 23.838s (userspace) = 27.675s
    └──[4]──╼ systemd-analyze blame
    12.083s NetworkManager.service
    11.247s accounts-daemon.service
    1.137s home-sergio-Disco_Duro.mount
    735ms systemd-vconsole-setup.service
    710ms systemd-udev-trigger.service
    631ms systemd-tmpfiles-setup.service
    630ms dev-hugepages.mount
    628ms lm_sensors.service
    626ms systemd-logind.service
    515ms dev-mqueue.mount
    515ms sys-kernel-debug.mount
    440ms systemd-tmpfiles-setup-dev.service
    432ms ufw.service
    380ms dev-sda5.swap
    365ms [email protected]
    356ms gdm.service
    356ms systemd-udevd.service
    356ms systemd-binfmt.service
    353ms systemd-sysctl.service
    341ms systemd-readahead-replay.service
    340ms systemd-readahead-collect.service
    293ms tmp.mount
    274ms colord.service
    267ms alsa-restore.service
    266ms cpupower.service
    259ms upower.service
    226ms kmod-static-nodes.service
    79ms systemd-random-seed.service
    66ms proc-sys-fs-binfmt_misc.mount
    60ms systemd-remount-fs.service
    59ms [email protected]
    58ms udisks2.service
    44ms [email protected]
    30ms sys-kernel-config.mount
    10ms polkit.service
    6ms systemd-journal-flush.service
    5ms [email protected]
    4ms systemd-update-utmp.service
    4ms systemd-backlight@leds:asus::kbd_backlight.service
    2ms wpa_supplicant.service
    2ms rtkit-daemon.service
    2ms systemd-backlight@backlight:intel_backlight.service
    2ms [email protected]
    1ms [email protected]
    1ms systemd-user-sessions.service
    1ms systemd-readahead-done.service
    1ms sys-fs-fuse-connections.mount
    └──[14]──╼ systemd-analyze critical-chain
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @23.838s
    └─multi-user.target @23.838s
    └─NetworkManager.service @11.755s +12.083s
    └─basic.target @11.753s
    └─timers.target @11.753s
    └─systemd-tmpfiles-clean.timer @11.752s
    └─sysinit.target @11.719s
    └─systemd-update-utmp.service @11.712s +4ms
    └─systemd-tmpfiles-setup.service @11.079s +631ms
    └─local-fs.target @11.076s
    └─home-sergio-Disco_Duro.mount @9.938s +1.137s
    └─[email protected] @9.498s +365ms
    └─dev-sda6.device @9.497s
    And dmesg reports this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ad7a8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad7a9000-0x00000000adda9fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000addaa000-0x00000000addacfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addad000-0x00000000addc2fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000addc3000-0x00000000addc8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addc9000-0x00000000addcafff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000addcb000-0x00000000addd4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addd5000-0x00000000adf2bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adf2c000-0x00000000adf2ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adf30000-0x00000000adf79fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adf7a000-0x00000000adf9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa0000-0x00000000adfa2fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa3000-0x00000000adfa4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa5000-0x00000000adfbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfbc000-0x00000000adfc1fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfc2000-0x00000000adfc9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfca000-0x00000000adfcafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfcb000-0x00000000adfd9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfda000-0x00000000adfdafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfdb000-0x00000000adfe5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfe6000-0x00000000adfeafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfeb000-0x00000000ae016fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae017000-0x00000000ae017fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae018000-0x00000000ae027fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae028000-0x00000000ae04efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae04f000-0x00000000ae061fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae062000-0x00000000ae062fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae063000-0x00000000ae063fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae064000-0x00000000ae065fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae066000-0x00000000ae066fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae067000-0x00000000ae06bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae06c000-0x00000000ae082fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae083000-0x00000000ae626fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae627000-0x00000000ae8a6fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8a7000-0x00000000ae8abfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8ac000-0x00000000ae8acfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8ad000-0x00000000ae8effff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8f0000-0x00000000aecfefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000aecff000-0x00000000aeff3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfdfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VB/N56VB, BIOS N56VB.202 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask F80000000 write-back
    [ 0.000000] 2 base 180000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0AFC00000 mask FFFC00000 uncachable
    [ 0.000000] 6 base 1B0000000 mask FF0000000 uncachable
    [ 0.000000] 7 base 1AF800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 1AF400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 1AF200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xafc00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
    [ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1aeffffff]
    [ 0.000000] [mem 0x1ac000000-0x1aeffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
    [ 0.000000] [mem 0x180000000-0x1abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xad7a8fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xad5fffff] page 2M
    [ 0.000000] [mem 0xad600000-0xad7a8fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddad000-0xaddc2fff]
    [ 0.000000] [mem 0xaddad000-0xaddc2fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddc9000-0xaddcafff]
    [ 0.000000] [mem 0xaddc9000-0xaddcafff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddd5000-0xadf2bfff]
    [ 0.000000] [mem 0xaddd5000-0xadf2bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadf30000-0xadf79fff]
    [ 0.000000] [mem 0xadf30000-0xadf79fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfa0000-0xadfa2fff]
    [ 0.000000] [mem 0xadfa0000-0xadfa2fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfa5000-0xadfbbfff]
    [ 0.000000] [mem 0xadfa5000-0xadfbbfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfc2000-0xadfc9fff]
    [ 0.000000] [mem 0xadfc2000-0xadfc9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfcb000-0xadfd9fff]
    [ 0.000000] [mem 0xadfcb000-0xadfd9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfdb000-0xadfe5fff]
    [ 0.000000] [mem 0xadfdb000-0xadfe5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfeb000-0xae016fff]
    [ 0.000000] [mem 0xadfeb000-0xae016fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae018000-0xae027fff]
    [ 0.000000] [mem 0xae018000-0xae027fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae04f000-0xae061fff]
    [ 0.000000] [mem 0xae04f000-0xae061fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae063000-0xae063fff]
    [ 0.000000] [mem 0xae063000-0xae063fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae066000-0xae066fff]
    [ 0.000000] [mem 0xae066000-0xae066fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae06c000-0xae082fff]
    [ 0.000000] [mem 0xae06c000-0xae082fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae8ac000-0xae8acfff]
    [ 0.000000] [mem 0xae8ac000-0xae8acfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae8f0000-0xaecfefff]
    [ 0.000000] [mem 0xae8f0000-0xae9fffff] page 4k
    [ 0.000000] [mem 0xaea00000-0xaebfffff] page 2M
    [ 0.000000] [mem 0xaec00000-0xaecfefff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaeff4000-0xaeffffff]
    [ 0.000000] [mem 0xaeff4000-0xaeffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
    [ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3757a000-0x37ab4fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 0x00000000AE879078 00007C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000AE88CAE0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000AE879188 013957 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 0x00000000AE8A4080 000040
    [ 0.000000] ACPI: APIC 0x00000000AE88CBF0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000AE88CC68 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x00000000AE88CCB0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 0x00000000AE88CD78 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000AE88CDB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000AE88CDF0 000632 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000AE88D428 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000AE88D8C8 0009D0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 0x00000000AE88E298 000B18 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MSDM 0x00000000AE626E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1af1fffff]
    [ 0.000000] NODE_DATA [mem 0x1af1f1000-0x1af1f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9000000-ffff8801ae7fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x1af1fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xad7a8fff]
    [ 0.000000] node 0: [mem 0xaddad000-0xaddc2fff]
    [ 0.000000] node 0: [mem 0xaddc9000-0xaddcafff]
    [ 0.000000] node 0: [mem 0xaddd5000-0xadf2bfff]
    [ 0.000000] node 0: [mem 0xadf30000-0xadf79fff]
    [ 0.000000] node 0: [mem 0xadfa0000-0xadfa2fff]
    [ 0.000000] node 0: [mem 0xadfa5000-0xadfbbfff]
    [ 0.000000] node 0: [mem 0xadfc2000-0xadfc9fff]
    [ 0.000000] node 0: [mem 0xadfcb000-0xadfd9fff]
    [ 0.000000] node 0: [mem 0xadfdb000-0xadfe5fff]
    [ 0.000000] node 0: [mem 0xadfeb000-0xae016fff]
    [ 0.000000] node 0: [mem 0xae018000-0xae027fff]
    [ 0.000000] node 0: [mem 0xae04f000-0xae061fff]
    [ 0.000000] node 0: [mem 0xae063000-0xae063fff]
    [ 0.000000] node 0: [mem 0xae066000-0xae066fff]
    [ 0.000000] node 0: [mem 0xae06c000-0xae082fff]
    [ 0.000000] node 0: [mem 0xae8ac000-0xae8acfff]
    [ 0.000000] node 0: [mem 0xae8f0000-0xaecfefff]
    [ 0.000000] node 0: [mem 0xaeff4000-0xaeffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1af1fffff]
    [ 0.000000] On node 0 totalpages: 1428925
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11057 pages used for memmap
    [ 0.000000] DMA32 zone: 707617 pages, LIFO batch:31
    [ 0.000000] Normal zone: 11208 pages used for memmap
    [ 0.000000] Normal zone: 717312 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xafe00000-0xcfdfffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad7a9000-0xadda9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddaa000-0xaddacfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddc3000-0xaddc8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddcb000-0xaddd4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadf2c000-0xadf2ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadf7a000-0xadf9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfa3000-0xadfa4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfbc000-0xadfc1fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfca000-0xadfcafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfda000-0xadfdafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfe6000-0xadfeafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae017000-0xae017fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae028000-0xae04efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae062000-0xae062fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae064000-0xae065fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae067000-0xae06bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae083000-0xae626fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae627000-0xae8a6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae8a7000-0xae8abfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae8ad000-0xae8effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaecff000-0xaeff3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xafbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xcfdfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801aee00000 s86784 r8192 d23808 u524288
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1406575
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 5541880K/5715700K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 173820K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 23068672 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2594.142 MHz processor
    [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.46 BogoMIPS (lpj=8647140)
    [ 0.000036] pid_max: default: 32768 minimum: 301
    [ 0.000042] ACPI: Core revision 20140424
    [ 0.013454] ACPI: All ACPI Tables successfully acquired
    [ 0.015248] Security Framework initialized
    [ 0.015253] Yama: becoming mindful.
    [ 0.015698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.017594] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.018433] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.018442] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.018639] Initializing cgroup subsys memory
    [ 0.018655] Initializing cgroup subsys devices
    [ 0.018661] Initializing cgroup subsys freezer
    [ 0.018663] Initializing cgroup subsys net_cls
    [ 0.018666] Initializing cgroup subsys blkio
    [ 0.018687] CPU: Physical Processor ID: 0
    [ 0.018688] CPU: Processor Core ID: 0
    [ 0.018693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.019034] mce: CPU supports 7 MCE banks
    [ 0.019044] CPU0: Thermal monitoring enabled (TM1)
    [ 0.019053] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.019156] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.020028] ftrace: allocating 20434 entries in 80 pages
    [ 0.029301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.062327] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.062334] TSC deadline timer enabled
    [ 0.062356] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.062374] ... version: 3
    [ 0.062375] ... bit width: 48
    [ 0.062376] ... generic registers: 4
    [ 0.062377] ... value mask: 0000ffffffffffff
    [ 0.062377] ... max period: 0000ffffffffffff
    [ 0.062378] ... fixed-purpose events: 3
    [ 0.062379] ... event mask: 000000070000000f
    [ 0.089127] x86: Booting SMP configuration:
    [ 0.089129] .... node #0, CPUs: #1
    [ 0.102615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.109323] #2 #3
    [ 0.143069] x86: Booted up 1 node, 4 CPUs
    [ 0.143072] smpboot: Total of 4 processors activated (20761.85 BogoMIPS)
    [ 0.146151] devtmpfs: initialized
    [ 0.148360] PM: Registering ACPI NVS region [mem 0xad7a9000-0xadda9fff] (6295552 bytes)
    [ 0.148429] PM: Registering ACPI NVS region [mem 0xae627000-0xae8a6fff] (2621440 bytes)
    [ 0.148457] PM: Registering ACPI NVS region [mem 0xae8ad000-0xae8effff] (274432 bytes)
    [ 0.149179] pinctrl core: initialized pinctrl subsystem
    [ 0.149217] RTC time: 23:34:40, date: 09/13/14
    [ 0.149261] NET: Registered protocol family 16
    [ 0.149360] cpuidle: using governor ladder
    [ 0.149362] cpuidle: using governor menu
    [ 0.149386] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.149388] ACPI: bus type PCI registered
    [ 0.149389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.149452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.149454] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.149534] PCI: Using configuration type 1 for base access
    [ 0.163412] ACPI: Added _OSI(Module Device)
    [ 0.163414] ACPI: Added _OSI(Processor Device)
    [ 0.163415] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.163416] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.165254] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.167131] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.283333] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.313759] ACPI: Dynamic OEM Table Load:
    [ 0.313766] ACPI: SSDT 0xFFFF8801A66AB000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.323515] ACPI: Dynamic OEM Table Load:
    [ 0.323519] ACPI: SSDT 0xFFFF8801A6633C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.336756] ACPI: Dynamic OEM Table Load:
    [ 0.336759] ACPI: SSDT 0xFFFF8801A665BE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.347197] ACPI: Interpreter enabled
    [ 0.347203] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.347207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.347221] ACPI: (supports S0 S3 S4 S5)
    [ 0.347222] ACPI: Using IOAPIC for interrupt routing
    [ 0.347245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.468144] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.468149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.556840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 0.556961] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 0.557508] PCI host bridge to bus 0000:00
    [ 0.557511] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.557512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.557514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.557515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.557517] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.557518] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.557519] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.557521] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.557522] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.557523] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.557525] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.557532] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.557613] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.557643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.557680] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.557718] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.557728] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.557734] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.557739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.557836] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.557859] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.557931] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.557971] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.558011] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.558034] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a00f 64bit]
    [ 0.558108] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.558190] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.558212] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
    [ 0.558303] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.558345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.558382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.558398] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    [ 0.558473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.558516] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.558550] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.558633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.558708] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.558790] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.558866] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 0.558948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.558992] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.559033] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.559054] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
    [ 0.559145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.559186] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.559222] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.559393] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.559411] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.559418] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.559427] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.559434] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.559441] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.559449] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
    [ 0.559495] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.559563] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.559579] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
    [ 0.559600] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.559717] pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200
    [ 0.559731] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.559743] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.559755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.559763] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.559772] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.563477] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.563482] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.563487] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.563493] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.563574] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.563712] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
    [ 0.563765] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
    [ 0.564012] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.564057] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.570225] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.570232] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.570322] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
    [ 0.570354] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
    [ 0.570368] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.570508] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.570545] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.576839] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.576847] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.576854] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.576926] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.630685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 0.630728] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
    [ 0.630769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 0.630809] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
    [ 0.630851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.630892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.630936] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
    [ 0.630976] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 0.631110] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.631171] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.631262] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.631264] vgaarb: loaded
    [ 0.631265] vgaarb: bridge control possible 0000:00:02.0
    [ 0.631295] PCI: Using ACPI for IRQ routing
    [ 0.632841] PCI: pci_cache_line_size set to 64 bytes
    [ 0.632894] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.632895] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.632896] e820: reserve RAM buffer [mem 0xad7a9000-0xafffffff]
    [ 0.632901] e820: reserve RAM buffer [mem 0xaddc3000-0xafffffff]
    [ 0.632906] e820: reserve RAM buffer [mem 0xaddcb000-0xafffffff]
    [ 0.632911] e820: reserve RAM buffer [mem 0xadf2c000-0xafffffff]
    [ 0.632915] e820: reserve RAM buffer [mem 0xadf7a000-0xafffffff]
    [ 0.632919] e820: reserve RAM buffer [mem 0xadfa3000-0xafffffff]
    [ 0.632924] e820: reserve RAM buffer [mem 0xadfbc000-0xafffffff]
    [ 0.632928] e820: reserve RAM buffer [mem 0xadfca000-0xafffffff]
    [ 0.632932] e820: reserve RAM buffer [mem 0xadfda000-0xafffffff]
    [ 0.632935] e820: reserve RAM buffer [mem 0xadfe6000-0xafffffff]
    [ 0.632939] e820: reserve RAM buffer [mem 0xae017000-0xafffffff]
    [ 0.632942] e820: reserve RAM buffer [mem 0xae028000-0xafffffff]
    [ 0.632946] e820: reserve RAM buffer [mem 0xae062000-0xafffffff]
    [ 0.632949] e820: reserve RAM buffer [mem 0xae064000-0xafffffff]
    [ 0.632951] e820: reserve RAM buffer [mem 0xae067000-0xafffffff]
    [ 0.632954] e820: reserve RAM buffer [mem 0xae083000-0xafffffff]
    [ 0.632956] e820: reserve RAM buffer [mem 0xae8ad000-0xafffffff]
    [ 0.632958] e820: reserve RAM buffer [mem 0xaecff000-0xafffffff]
    [ 0.632959] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
    [ 0.632961] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
    [ 0.633057] NetLabel: Initializing
    [ 0.633058] NetLabel: domain hash size = 128
    [ 0.633059] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.633069] NetLabel: unlabeled traffic allowed by default
    [ 0.633093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.633097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.635125] Switched to clocksource hpet
    [ 0.639054] pnp: PnP ACPI init
    [ 0.639068] ACPI: bus type PNP registered
    [ 0.639157] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.639160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.691999] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.692001] system 00:01: [io 0x1000-0x100f] has been reserved
    [ 0.692003] system 00:01: [io 0xffff] has been reserved
    [ 0.692004] system 00:01: [io 0xffff] has been reserved
    [ 0.692006] system 00:01: [io 0x0400-0x0453] could not be reserved
    [ 0.692007] system 00:01: [io 0x0458-0x047f] has been reserved
    [ 0.692009] system 00:01: [io 0x0500-0x057f] has been reserved
    [ 0.692010] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.692013] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692041] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.692088] system 00:03: [io 0x0454-0x0457] has been reserved
    [ 0.692090] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.692134] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.692136] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692189] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.692225] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
    [ 0.692379] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.692381] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.692383] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.692384] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.692386] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.692388] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.692389] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.692391] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.692393] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.692395] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.692396] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 0.692398] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692464] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 0.692466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692587] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.692589] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.692591] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.692617] pnp: PnP ACPI: found 10 devices
    [ 0.692618] ACPI: bus type PNP unregistered
    [ 0.698950] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.698953] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.698956] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.698958] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.698961] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.698973] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.698978] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.698986] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.698989] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.698995] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.699004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.699005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.699007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.699008] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.699009] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.699011] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.699012] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.699014] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.699015] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.699016] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff]
    [ 0.699018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.699019] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.699021] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.699023] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.699024] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.699026] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 0.699048] NET: Registered protocol family 2
    [ 0.699217] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.699348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.699457] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.699472] TCP: reno registered
    [ 0.699483] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.699508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.699564] NET: Registered protocol family 1
    [ 0.699579] pci 0000:00:02.0: Boot video device
    [ 0.735318] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.735322] PCI: CLS 64 bytes, default 64
    [ 0.735362] Unpacking initramfs...
    [ 0.816940] Freeing initrd memory: 5356K (ffff88003757a000 - ffff880037ab5000)
    [ 0.816948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.816950] software IO TLB [mem 0xa97a9000-0xad7a9000] (64MB) mapped at [ffff8800a97a9000-ffff8800ad7a8fff]
    [ 0.817180] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.817219] Scanning for low memory corruption every 60 seconds
    [ 0.817445] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.817768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.818908] zbud: loaded
    [ 0.819058] VFS: Disk quotas dquot_6.5.2
    [ 0.819086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.819182] msgmni has been set to 10834
    [ 0.819224] Key type big_key registered
    [ 0.819368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.819416] io scheduler noop registered
    [ 0.819420] io scheduler deadline registered
    [ 0.819459] io scheduler cfq registered (default)
    [ 0.819605] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.819964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.819978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.820007] intel_idle: MWAIT substates: 0x21120
    [ 0.820008] intel_idle: v0.4 model 0x3A
    [ 0.820009] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.820167] GHES: HEST is not enabled!
    [ 0.820230] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.820623] Linux agpgart interface v0.103
    [ 0.820666] rtc_cmos 00:02: RTC can wake from S4
    [ 0.820787] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.820817] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.820826] Intel P-state driver initializing.
    [ 0.820835] Intel pstate controlling: cpu 0
    [ 0.820854] Intel pstate controlling: cpu 1
    [ 0.820871] Intel pstate controlling: cpu 2
    [ 0.820903] Intel pstate controlling: cpu 3
    [ 0.820972] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.821169] TCP: cubic registered
    [ 0.821332] NET: Registered protocol family 10
    [ 0.821644] NET: Registered protocol family 17
    [ 0.822136] registered taskstats version 1
    [ 0.822912] Magic number: 14:465:605
    [ 0.823042] rtc_cmos 00:02: setting system clock to 2014-09-13 23:34:40 UTC (1410651280)
    [ 0.823314] PM: Hibernation image not present or could not be loaded.
    [ 0.824652] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.824655] Write protecting the kernel read-only data: 8192k
    [ 0.828153] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 0.829631] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.831604] random: systemd urandom read with 1 bits of entropy available
    [ 0.832821] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked executable. Please remove executable permission bits. Proceeding anyway.
    [ 0.832824] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
    [ 0.835895] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
    [ 0.835900] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
    [ 0.835907] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
    [ 0.835915] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
    [ 0.835918] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
    [ 0.835921] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
    [ 0.846204] systemd-udevd[61]: starting version 216
    [ 0.851356] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [ 0.857066] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.858876] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.870874] ACPI: bus type USB registered
    [ 0.870902] usbcore: registered new interface driver usbfs
    [ 0.870913] usbcore: registered new interface driver hub
    [ 0.870957] usbcore: registered new device driver usb
    [ 0.871727] [drm] Initialized drm 1.1.0 20060810
    [ 0.871912] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.871977] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.872004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.872031] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.872054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.872570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.872800] ehci-pci: EHCI PCI platform driver
    [ 0.872972] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.872979] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.872995] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.873414] SCSI subsystem initialized
    [ 0.874735] libata version 3.00 loaded.
    [ 0.876901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.876921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
    [ 0.878730] ACPI: Lid Switch [LID]
    [ 0.878783] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [ 0.878787] ACPI: Sleep Button [SLPB]
    [ 0.878823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 0.878824] ACPI: Power Button [PWRF]
    [ 0.885423] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.885744] hub 1-0:1.0: USB hub found
    [ 0.885754] hub 1-0:1.0: 2 ports detected
    [ 0.886157] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.886163] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.886179] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.890092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.890108] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
    [ 0.898678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.898863] hub 2-0:1.0: USB hub found
    [ 0.898873] hub 2-0:1.0: 2 ports detected
    [ 0.899123] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.899131] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.899234] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.899258] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 0.899457] hub 3-0:1.0: USB hub found
    [ 0.899469] hub 3-0:1.0: 4 ports detected
    [ 0.899602] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.899604] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.899850] hub 4-0:1.0: USB hub found
    [ 0.899861] hub 4-0:1.0: 4 ports detected
    [ 0.899997] ahci 0000:00:1f.2: version 3.0
    [ 0.900123] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.912049] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 0.912054] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.919284] scsi0 : ahci
    [ 0.919473] scsi1 : ahci
    [ 0.919569] scsi2 : ahci
    [ 0.919652] scsi3 : ahci
    [ 0.919737] scsi4 : ahci
    [ 0.919817] scsi5 : ahci
    [ 0.919849] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 42
    [ 0.919850] ata2: DUMMY
    [ 0.919853] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 42
    [ 0.919853] ata4: DUMMY
    [ 0.919854] ata5: DUMMY
    [ 0.919855] ata6: DUMMY
    [ 0.920241] [drm] Memory usable by graphics device = 2048M
    [ 0.920243] [drm] Replacing VGA console driver
    [ 0.921140] Console: switching to colour dummy device 80x25
    [ 0.927099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 0.978778] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 0.978791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.978793] [drm] Driver supports precise vblank timestamp query.
    [ 0.992401] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.031464] fbcon: inteldrmfb (fb0) is primary device
    [ 1.192296] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.238940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.238968] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.241132] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.241135] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.242336] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133
    [ 1.244048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.244388] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.244391] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.244636] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.244639] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.245827] ata3.00: configured for UDMA/133
    [ 1.249666] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
    [ 1.249668] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.254977] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.255204] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.255207] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.260474] ata1.00: configured for UDMA/133
    [ 1.260796] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
    [ 1.262991] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5
    [ 1.279845] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.279848] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.279989] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.279992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.280037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.288053] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.288055] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.288272] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.305366] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
    [ 1.305367] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
    [ 1.316307] hub 1-1:1.0: USB hub found
    [ 1.316391] hub 1-1:1.0: 6 ports detected
    [ 1.397316] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 1.399073] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.422404] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.546748] hub 2-1:1.0: USB hub found
    [ 1.546905] hub 2-1:1.0: 6 ports detected
    [ 1.683098] Console: switching to colour frame buffer device 240x67
    [ 1.692813] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 1.692815] i915 0000:00:02.0: registered panic notifier
    [ 1.709304] usb 3-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.709735] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 1.709833] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
    [ 1.727351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.752763] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
    [ 1.752815] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.819288] tsc: Refined TSC clocksource calibration: 2594.112 MHz
    [ 1.887971] usb 3-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.890031] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.900283] usbcore: registered new interface driver usbhid
    [ 1.900287] usbhid: USB HID core driver
    [ 1.901514] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:077B.0001/input/input10
    [ 1.901597] hid-generic 0003:045E:077B.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:14.0-3/input0
    [ 1.966216] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 2.132934] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 2.416335] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 2.820032] Switched to clocksource tsc
    [ 2.888651] random: nonblocking pool is initialized
    [ 3.089789] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.358639] systemd-journald[53]: Received SIGTERM from PID 1 (systemd).
    [ 5.897107] systemd-readahead[155]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 6.512882] EXT4-fs (sda8): re-mounted. Opts: data=ordered
    [ 7.301637] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 7.308423] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 7.314841] systemd-udevd[191]: starting version 216
    [ 7.318026] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 9.643450] ACPI: AC Adapter [AC0] (off-line)
    [ 9.707164] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
    [ 9.707175] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
    [ 9.707183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707188] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707194] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707203] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707208] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707217] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707222] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707231] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 9.732620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 9.754610] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 9.823510] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140424/utaddress-258)
    [ 9.823518] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 9.823522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.885093] ACPI: Battery Slot [BAT0] (battery present)
    [ 9.885341] wmi: Mapper loaded
    [ 10.025457] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 10.107482] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.107485] ACPI: Thermal Zone [THRM] (54 C)
    [ 10.123269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.219286] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.271262] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 10.271264] Copyright(c) 2003- 2014 Intel Corporation
    [ 10.271366] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 10.271428] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 10.310963] iTCO_vendor_support: vendor-support=0
    [ 10.422203] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422220] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422235] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422315] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.525335] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:70:de:11]
    [ 10.559149] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 10.559206] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 10.559374] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.574607] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 10.677032] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 10.694508] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 10.694514] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 10.694517] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 10.694521] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 10.694580] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 10.703738] asus_wmi: ASUS WMI generic driver loaded
    [ 10.704976] asus_wmi: Initialization: 0x1
    [ 10.705014] asus_wmi: BIOS WMI version: 7.9
    [ 10.705057] asus_wmi: SFUN value: 0x6a0877
    [ 10.706030] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
    [ 10.715790] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 10.807860] asus_wmi: Backlight controlled by ACPI video driver
    [ 10.883267] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 10.898742] sound hdaudioC0D0: autoconfig: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker
    [ 10.898747] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.898750] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 10.898752] sound hdaudioC0D0: mono: mono_out=0x0
    [ 10.898754] sound hdaudioC0D0: dig-out=0x1e/0x0
    [ 10.898756] sound hdaudioC0D0: inputs:
    [ 10.898759] sound hdaudioC0D0: Internal Mic=0x19
    [ 10.898762] sound hdaudioC0D0: Mic=0x18
    [ 10.911221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
    [ 10.911566] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
    [ 10.911637] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
    [ 10.911707] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
    [ 11.070896] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
    [ 11.085464] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
    [ 11.152788] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
    [ 11.532713] systemd-udevd[285]: renamed network interface eth0 to enp4s0
    [ 11.632559] systemd-udevd[285]: renamed network interface wlan0 to wlp3s0
    [ 11.796657] mousedev: PS/2 mouse device common for all mice
    [ 11.814896] AVX version of gcm_enc/dec engaged.
    [ 12.249546] media: Linux media interface: v0.10
    [ 12.405592] Linux video capture interface: v2.00
    [ 12.489425] Bluetooth: Core ver 2.19
    [ 12.489454] NET: Registered protocol family 31
    [ 12.489458] Bluetooth: HCI device and connection manager initialized
    [ 12.489470] Bluetooth: HCI socket layer initialized
    [ 12.489475] Bluetooth: L2CAP socket layer initialized
    [ 12.489499] Bluetooth: SCO socket layer initialized
    [ 12.618057] usbcore: registered new interface driver btusb
    [ 12.741864] Adding 6291452k swap on /dev/sda5. Priority:-1 extents:1 across:6291452k FS
    [ 12.946876] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
    [ 12.964918] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21
    [ 12.965046] usbcore: registered new interface driver uvcvideo
    [ 12.965049] USB Video Class driver (1.1.1)
    [ 13.388855] intel_rapl: RAPL domain dram detection failed
    [ 15.010386] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 15.017669] systemd-journald[159]: Received request to flush runtime journal from PID 1
    [ 27.377350] bbswitch: version 0.8
    [ 27.377363] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 27.377367] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 27.377374] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 27.377449] bbswitch: detected an Optimus _DSM function
    [ 27.377495] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 27.378547] bbswitch: disabling discrete graphics
    [ 27.378554] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 27.805771] alx 0000:04:00.0: irq 47 for MSI/MSI-X
    [ 27.806124] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 27.840453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 27.847948] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    [ 28.089495] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 28.097001] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    [ 28.163505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
    [ 28.525115] fuse init (API version 7.23)
    [ 28.890210] wlp3s0: authenticate with 90:0d:cb:19:04:e0
    [ 28.895402] wlp3s0: send auth to 90:0d:cb:19:04:e0 (try 1/3)
    [ 28.897519] wlp3s0: authenticated
    [ 28.900414] wlp3s0: associate with 90:0d:cb:19:04:e0 (try 1/3)
    [ 28.916513] wlp3s0: RX AssocResp from 90:0d:cb:19:04:e0 (capab=0xc11 status=0 aid=4)
    [ 28.936417] wlp3s0: associated
    [ 28.936448] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
    [ 28.936477] cfg80211: Calling CRDA to update world regulatory domain
    [ 32.940

    hcra wrote:You might see this Wiki page for long boot times and NetworkManager
    https://wiki.archlinux.org/index.php/Sy … _over_time
    Wow, that solved this problem. I had 5 GB of systemd logs. I deleted them (after making a backup on another disk), I limited the journal size to only 50MB, and now NetworkManager only lasts 4 seconds to start, and GDM appears 10 seconds earlier. Thanks a lot

  • [SOLVED]Correct way to restart a systemd service on resume from susp?

    I have offlineimap setup to run as a daemon. It doesn't correctly resume operations after a resume from suspend to RAM without being restarted. The 'Conflicts=' line in the service file makes sure it is stopped when the machine suspends, but I can't figure out how to get it restarted again. Here is the service file:
    [Unit]
    Description=Start offlineimap as a daemon
    Requires=network.target
    Conflicts=suspend.target
    After=network.target
    [Service]
    User=%i
    EnvironmentFile=/home/%i/.gnupg/gpg-agent-info
    ExecStart=/usr/bin/offlineimap
    KillSignal=SIGUSR2
    Restart=always
    RestartSec=15
    [Install]
    WantedBy=multi-user.target
    I found an email thread here that seemed to imply that I could add sleep.target to 'WantedBy=' and sleep.target to 'After=' to get service to startup again after resume, but that didn't seem to work.
    Any ideas? Thanks!
    Scott
    Last edited by firecat53 (2014-07-01 16:40:20)

    tomk wrote:
    firecat53 wrote:It doesn't correctly resume operations after a resume from suspend to RAM without being restarted.
    Is this just something you have observed on your own system, or is it a known bug?
    Something I noticed and figured it was just due to frequently switching networks with VPN on/off again. After a quick search, I discovered the 'socktimeout' option, which I'm testing now to see if that solves the problem. It appears (although I _just_  found this, that it is a known bug. Some have had luck with setting socktimeout, others haven't. I'll post back if I see a difference or not.
    Thanks for the nudge
    Scott

  • [solved] kf5 and kde groups relation?

    Please, can anybody clarify a relation between kde and kf5 package groups and intended way of the kde4-to-kde5 migration in a whole?
    Last edited by student975 (2014-05-19 14:04:38)

    Roughly speaking, the kf5 packages are a split version of the kdelibs as we know them from KDE 4.x. , meant to replace them.
    Somewhere in the future all the apps developed on top of kdelibs will be ported to kf5 (currently only kate and maybe systemsettings have been ported). The same will happen for the plasma shell (plasma next) which is now in beta and available in the AUR.
    If you're not interested in testing plasma next or testing/developing kf5 apps you have no interest in kf5 packages either.
    For more info, consider reading Andrea's announcement related to kf5: http://blog.andreascarpino.it/kf5-offic … -for-arch/
    Last edited by Box0 (2014-05-19 14:02:59)

  • [SOLVED] KDE Plasma doesn't load correctly sometimes

    Hi!
    I have strange problem, if i remember correctly since the last qt upgrade. Sometimes the plasma desktop just doesnt load fully, my desktop doesn't react on hotkeys, panels doesn't work on any click, superkaramba doesn't load. The only thing that works is the KDE menu, ant if I run an application from there, plasma starts to finish loading (superkaramba appeares, hotkeys start to work, so it finishes the initialization). It doesn't happen at every startup. This wasn't a too big problem, I thought it would be corrected with a new upgrade, but today my kde desktop froze. My computer didn't react to anything, sometimes  was able to move the cursor, but after a click, this only function also disappeared. I restarted my computer with the reset button, and I also had some strange things on my monitor at boot, and kdm didn't load correctly, I had only two input areas, with unrecognizable characters. So reset again, and I started windows (i have a dual-boot system), and it also had some stranges stripes at startup, and didn't load correctly. So I turned my computer off, and back again (so not with the reset button), and that time nothing strange happened at boot time, KDE started correctly, but I got a freeze again after some time.
    Has anybody had similar problems? Does anybody have an idea what could cause this? I'm not sure it's a software related problem, but it started like one.
    Last edited by Ben_the1st (2010-12-04 12:35:55)

    It looks like it has to do something with the Nvidia driver, cause I have:
    (EE) NVIDIA(0): Error recovery failed.
    (EE) NVIDIA(0): *** Aborting ***
    lines in kdm.log

  • [SOLVED] Network Configuration -- unable to start a service file

    I am following this wiki page (Using Static IP address step) and created /etc/systemd/system/network.service as instructed
    [Unit]
    Description=Connect to the other pc
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    EnvironmentFile=/etc/conf.d/network
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    But I am unable to start network.service
    $ sudo systemctl start network
    Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
    $ systemctl status network.service
    network.service - Connect to voice
    Loaded: loaded (/etc/systemd/system/network.service; enabled)
    Active: failed (Result: resources)
    $ sudo journalctl -xn
    -- Logs begin at Sat 2013-03-30 03:48:02 AMT, end at Thu 2013-04-04 18:17:46 AMT. --
    Apr 04 18:17:26 work sudo[24774]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:44 work sudo[25354]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/systemctl start network
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Apr 04 18:17:44 work systemd[1]: Starting Connect to the other pc...
    -- Subject: Unit network.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
    -- Unit network.service has begun starting up.
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    Apr 04 18:17:44 work systemd[1]: network.service failed to run 'start' task: No such file or directory
    Apr 04 18:17:44 work systemd[1]: Failed to start Connect to the other pc.
    -- Subject: Unit network.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
    -- Unit network.service has failed.
    -- The result is failed.
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:46 work sudo[25421]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/journalctl -xn
    Apr 04 18:17:46 work sudo[25421]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Additional info:
    I have connected 2 PCs with LAN (Ethernet) cable and want configure them for exchanging files. Both running Arch Linux. I am following the Network Configuration wiki page from the beginning. Didn't have luck with DHCP/dynamic IP, so trying Static IP this time. Restarting the pc with network.service enabled results in same error (in systemctl --failed). Same error message on both PCs.
    Trying to run ExecStart lines one by one:
    $ sudo /sbin/ip link set dev lan up
    $ sudo /sbin/ip addr add 192.168.1.2/24 dev lan
    RTNETLINK answers: File exists
    $ sudo /sbin/ip route add default via 192.168.1.1
    RTNETLINK answers: File exists
    Does this mean there already is IP address and route assigned? If so, how to find out which service has done that? Do I need to remove it? Am I following the right wiki page (didn't find another)?
    What am I doing wrong and how can I correct this error? / Point me in right direction.
    Last edited by axper (2013-04-04 19:26:17)

    henk wrote:
    EnvironmentFile=/etc/conf.d/network
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    have you checked if the network file exists?
    Oh thanks, that line was causing problems! Now I do have network.service(s) running on both PC's with this content:
    [Unit]
    Description=Connect to my desktop/laptop
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    I don't get any errors, and this is network's status (on both PCs) when cable is connected
    $ sudo systemctl restart network
    $ systemctl status network
    network.service - Connect to my desktop
    Loaded: loaded (/etc/systemd/system/network.service; disabled)
    Active: active (exited) since Thu 2013-04-04 22:43:22 AMT; 8s ago
    Process: 9761 ExecStop=/sbin/ip link set dev lan down (code=exited, status=0/SUCCESS)
    Process: 9757 ExecStop=/sbin/ip addr flush dev lan (code=exited, status=0/SUCCESS)
    Process: 9768 ExecStart=/sbin/ip route add default via 192.168.1.1 (code=exited, status=0/SUCCESS)
    Process: 9766 ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan (code=exited, status=0/SUCCESS)
    Process: 9764 ExecStart=/sbin/ip link set dev lan up (code=exited, status=0/SUCCESS)
    And here wiki page is no more help. How can I test connection?
    I try to ping, and it works on both machines (if it's the right thing to test?)
    $ ping -c3 192.168.1.2
    PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
    64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.039 ms
    64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.050 ms
    64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.060 ms
    --- 192.168.1.2 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 1998ms
    rtt min/avg/max/mdev = 0.039/0.049/0.060/0.011 ms
    Now I need to figure out how to share files. Thanks all.
    Last edited by axper (2013-04-04 19:04:43)

  • [SOLVED] zenity 3.8 broke my scripts

    After updating from zenity 3.6 to 3.8, most of my scripts dont work.
    A little example:
    #!/bin/bash
    title="Server Options"
    prompt="Pick an option:"
    options=("option 1" "option 2" "option 3")
    while opt=$(zenity --width 500 --height 300 --title="$title" --text="$prompt" --list --column="Options" "${options[@]}"); do
    case "$opt" in
    "${options[0]}" ) zenity --info --text "option 1";;
    "${options[1]}" ) zenity --info --text "option 2";;
    "${options[2]}" ) zenity --info --text "option 3";;
    esac
    done
    This normally, when selecting an option should execute: zenity --info --text "option X"
    Now it does not execute anything.
    Downgrading to zenity 3.6 fixes the problem.
    Please, a little help !
    Last edited by tritonas00 (2013-04-24 16:55:25)

    Stebalien wrote:Please mark this thread as solved. Also, if you don't plan on reporting the bug upstream yourself, tell me so I can.
    Sorry, i forgot.
    I made the report yesterday -> https://bugzilla.gnome.org/show_bug.cgi?id=698683
    Last edited by tritonas00 (2013-04-24 16:57:32)

  • [solved]libgtop 2.30 broke g15stats, what do I do?

    Libgtop 2.30 broke g15stats I really want to fix it and don't mind digging my hands a little through the source code to do it, I just have little idea what to do with the code (as in what lines to look for)
    Long story short:
    #g15stats
    g15stats: error while loading shared libraries: libgtop-2.0.so.7: cannot open shared object file: No such file or directory
    it is my understanding that this file is now called libgtop-2.0.so.10, but symlinking it to libgtop-2.0.so.7 did me no good.
    So how do I fix this?
    Edit: Silly me, I found out that the package worked fine if I installed it with yaourt. I assume I just had to recompile it, but this is weird because I had already done this, perhaps I needed to have the linux-headers installed for it to work? what was the catch?
    I suspect I just had to compile it again.
    Last edited by rabcor (2014-06-11 12:10:21)

    Libgtop 2.30 broke g15stats I really want to fix it and don't mind digging my hands a little through the source code to do it, I just have little idea what to do with the code (as in what lines to look for)
    Long story short:
    #g15stats
    g15stats: error while loading shared libraries: libgtop-2.0.so.7: cannot open shared object file: No such file or directory
    it is my understanding that this file is now called libgtop-2.0.so.10, but symlinking it to libgtop-2.0.so.7 did me no good.
    So how do I fix this?
    Edit: Silly me, I found out that the package worked fine if I installed it with yaourt. I assume I just had to recompile it, but this is weird because I had already done this, perhaps I needed to have the linux-headers installed for it to work? what was the catch?
    I suspect I just had to compile it again.
    Last edited by rabcor (2014-06-11 12:10:21)

  • [solved]systemd can not auto start tomcat7.service

    Because the boot spend too much time. in tomcat7.servce,line 21: wait=10 \
    change to wait=50 \ or more big number.then the service can start success.

    Because the boot spend too much time. in tomcat7.servce,line 21: wait=10 \
    change to wait=50 \ or more big number.then the service can start success.

  • [SOLVED] Systemd - console-kit-log-system-start.service FAILED

    Hi!
    i'm using systemd, and i removed initscripts and sysvinit.
    I've now noticed this error, it seems that service failed to load.
    By the way, i can systemctl restart it, and then it will be active and running. So, where is the problem?  I found this, that seems to be my same problem, but it is 2 years old! https://bugzilla.redhat.com/show_bug.cgi?id=632714 .
    Any idea?
    thanks!
    Last edited by nierro (2012-07-31 18:59:21)

    Looking into the issue, i can't find a solution...
    so, here there are :
    systemctl status console-kit-log-system-start.service
    console-kit-log-system-start.service - Console System Startup Logging
    Loaded: loaded (/usr/lib/systemd/system/console-kit-log-system-start.service; static)
    Active: failed (Result: exit-code) since Tue, 03 Jul 2012 09:34:45 +0200; 1 day and 3h ago
    Process: 175 ExecStart=/usr/sbin/ck-log-system-start (code=exited, status=1/FAILURE)
    CGroup: name=systemd:/system/console-kit-log-system-start.service
    and
    journalctl -a | grep console-kit-log
    Jul 03 09:34:45 arch systemd[1]: console-kit-log-system-start.service: main process exited, code=exited, status=1
    Jul 03 09:34:45 arch systemd[1]: Unit console-kit-log-system-start.service entered failed state.
    Any idea?
    EDIT:as i said, i can restart it, without any sort of problem, so i guess the issue is related to the deps of this service (After=...). I left it untouched, never modified this service...
    Last edited by nierro (2012-07-04 12:11:10)

Maybe you are looking for

  • VPN Split Tunneling

    Anyone familiar with setting up Split tunneling. I have an Actiontec router and I'm trying to setup my work computer so it can access local network ressources and remain connected to the VPN connection to work at the same time. My companies VPN does

  • All apps gone after forced restart of iPad

    Hello, I was just developing a bit with my iPad and after the debugger got hang I had to restart my iPad by holding down the home button and the lock button for some seconds. After the iPad was booted up again, i noticed that all apps (expect the bui

  • Can't move all emails to trash at once after 8.1 update - only by individually selecting

    I have three pop accounts.  When I want to delete the emails on my device, I was able to mark all as read, select the first email, then select and hold move while unchecking the email which would bring be to a window with the option to move all messa

  • Spry tooltip problem in IE 7 & IE 8

    Does the Spry tooltip have a browser incompatibility with IE 7 and IE 8, or is there something on my test page that interferes with the function of the tooltip?   I inserted a tooltip in this page using DW CS5--very straightforward as shown on every

  • Where is the file management utility on my HP Pavilion dv5-1150us Entertainment notebook pc?

    I am trying to hookup a WD My Passport Ultra 2TB external drive for backup on my notebook.  It tells me to check the file management utility to see if the WD File Setup is listed.  How do I go to and find that utility?