[SOLVED] KMix lost sliders
After last KDE upgrade I lost all those sliders in KMix left with only one called Internal Audio Analog Stereo (see screenshot)
Anybody knows what's going on and how to restore previous look? Thanks.
Last edited by benke (2010-12-05 14:21:09)
toad wrote:kmix has gone the way of the pulse... Check the KDE change log for 4.5.4-1
Do you have a link with detailed informations?
Similar Messages
-
[SOLVED] Hostname lost
Hello all,
I tried all what I could, impossible to get my hostname back !
I made an upgrade on a machine and lost the hostname !! This computer should be named crystal, but now I have :
$ uname -n
(none)
$ echo $HOSTNAME
Here is /etc/hosts :
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 crystal.localdomain crystal
::1 crystal.localdomain crystal
# End of file
I tried installing everything I could like net-tools, coreutils, ypbind but nothing
I don't have the `hostname` command.
I've also put crystal in /etc/hostname.
Don't now what to do now or where to search.... Any help please ?
Last edited by Kooothor (2011-06-16 09:31:36)Thanks the problem is solved \o/
Dunno if it was the new /etc/hosts format or the -Syu or both...
Thanks guys -
SOLVED - T500 - Lost sound volume after a very recent update
I keep my T500 current with new drivers, however in a recent update (I do not know which) I lost almost all the volume on my speakers and headphone.
Has anyone experienced this?
Has anyone found a solution to this problem?
Thanks,
Persio.
Solved!
Go to Solution.ONeill, thanks for your response and interest in helping.
I am running Win 7 Ultimate x64.
I have just finished doing a series of tests with NO success.
All my drivers are current with the Lenovo Support Site drivers' versions.
I have unistalled the Conexant driver using the Device Driver screen and let the system reinstall (PnP).
I have unistalled the Hot Key Drivers, tested without them installed, and reinstalled them.
I have reinstalled the Conexant driver fresh from the Lenovo Support Site.
The problem I am having is the following:
In a silent room, using the SmartAudio aplet from Control Panel, I can barely hear the sounds with the volume set at 100%. This is true for the internal speakers and for a headphone plugged into the system.
This indicates to me that the it is a volume issue.
I would appreciate your comments and suggestions.
Persio. -
How to solve RDP lost focus issue when RDP window minimized
Hello,
I have an application running on Windows 2012 server where users connect to the server via RDP client. Users run on Windows 7/XP. The application is a screen recording software which records all the activity.
Users connect to Windows Server 2012 by giving the IP Address in RDP. The user opens the applications & starts his work and recording is also started.
At an instant, the user minimized the RDP window on his Laptop/Desktop, now the screen-recording stops. As soon as the RDP window is maximized, the recording starts again.
I learned from Technet that there is a workaround by tweaking the registry on user laptop/desktop. However the problem here is that I have no control on user laptops/desktops as the users are spread in the whole world & does not belong only to my organization.
Hence is there any other way by which I can solve the issue without any registry tweak. Is there a way by which I can enforce users to use the RDP client of the Windows 2012 Server on which I have control and I can change the settings on the same.
Will Windows 2012 Server RDS services resolve the issue without any change at the user end.
This is a P1 issue for me. Hence expecting support from the community
RegardsHi,
Thank you for posting in Windows Server Forum.
Initially suggest you to upgrade the RDP client version to RDP 8.1 for better performance.
From the description it seems you are using RDP to connect to the server. Can you please clarify again, if it’s RemoteApp application or connecting the application after RDPing to the server?
If it’s RemoteApp application and facing problem then there is one Hotfix available to try:
A RemoteApp application main window takes the focus after the applications windows are maximized in Windows
http://support.microsoft.com/kb/2862019
For RDP, you can try the following option to configure. You can configure “Keep-alive connection interval” under group policy and check.
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Services Session Host\Connections\
Configure Keep-alive connection interval: Enable and specify value
In addition to this also verify the registry setting must be set as per following
HKEY_Local_Machine \ SOFTWARE \ Policies \ Microsoft \ Windows NT \ Terminal Services
KeepAliveEnable REG_DWORD
0x00000001 (1)
KeepAliveInterval REG_DWORD
0x00000001 (1)
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
[Solved] Kmix krash on kde startup
I have archlinux with kde and phonon-vlc. Every time i've logged in i see a KDE crash report from kdeinit4, sometimes there is also a KMix crash report. Sound in all application is perfect. I tried to install pulseaudio, after that there is no reports, but now sound is terrible noisy. Can you help me?
Last edited by berlin (2012-07-31 08:42:53)boast wrote:
berlin wrote:Oh, i've found that music in google-chrome or dolphin preview is without noise. But vlc, amarok and plasma-desktop play sounds with noise.
do these help?
https://wiki.archlinux.org/index.php/Pu … _crackling
thank you, that's help:
load-module module-udev-detect tsched=0
also i delete ~/.pulse folder -
Lost Sliders in Tone Curve Dialogue 3. & 3.2
Windows XP- I cannot retrieve region sliders in Tone Curve in Develop module. Point curve still visible & useable. Can't find any info under communities. Anyone any ideas please? No problen on laptop Win 7 64. What have I done?
Allan DevonAllan,
You clicked on the little square with a line through it in the lower right corner of the Tone Curve control, putting yourself into Point Curve mode. Click it again to go back.
Hal -
[SOLVED] I lost all file-program associations!
it's all gone, for all users, in fact, some were preserved (have only seen it in the folder) but stay read only (directories are associated with thunar and I can do nothing about it). maybe it has to do with uninstalling perl-file-mimeinfo, although I installed it for like 2 hours and then uninstalled it, or could be some problem with having a rather outdated nautilus (I have a custom-built nautilus with tracker support that I haven't bethered to update), although I do not think it's that because the same happens from thunar :\
I'll keep trying to get them back, if you have any idea please enlight me, now I'm off to update nautilus.
EDIT: Looks like shared-mime-info got corrupted somehow... I reinstalled it and now everything is back.
Last edited by Phrodo_00 (2007-08-10 02:20:24)read reply #3 about the ORDER of uninstalling & installing
If you uninstall and reinstall to fix, run the cleaner after UN and before RE
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
[SOLVED] systemd + lost networking
After the last update I seem to have lost my network. Systemd complains it cannot find the network.service file.
The systemd package only contains network.target and not network.service
How can i manually start the network ( simple eth0 + dhcp).
And how can i fix my system?
Last edited by GogglesGuy (2012-07-16 14:52:17)65kid wrote:network.service has been removed from systemd-arch-units, have a look at:
https://wiki.archlinux.org/index.php/Systemd#Network
Ah I see. Thanks. -
[SOLVED] sound lost since last upgrade
I did an upgrade last night and since then my audio has stopped working...
every time I boot up into KDE... I get a notification ( from kmix I assume ) my 2 playback devices are not working...
I get no audio output from either of my soundcards...
I've not changed any settings and can't figure out what the problem is...
any suggestions?
I am in the audio group
thanks
my config ( still working on this )
pcm.!default {
type plug
slave.pcm "duplex"
pcm.non_block_duplex {
type plug
slave.pcm "duplex"
pcm.duplex {
type asym
playback.pcm "dmixer"
capture.pcm "dsnooper"
pcm.dmixer {
type dmix
ipc_key 1234
slave {
pcm "hw:1,0"
rate 44100
pcm.dsnooper {
type dsnoop
ipc_key 1234
slave {
pcm "hw:0,0"
Last edited by sinatosk (2011-06-07 14:03:06)embarrassing as this is...
I have a Asus Xonar D2X as my second sound card...
it requires extra power...
somehow the power cable that provides extra... wasn't correctly inplace... *confused*
wiggled that back in and it's fine now
I apologize
thanks anyways -
[SOLVED] Evince lost its icons
Hi.
I'm not sure when this happened, but suddenly evince has no icons in the toolbar. Everything still works, but all the icons display as white squares with a red "x" in the middle. Did this happen to anyone else?
Last edited by Pacopag (2013-05-13 20:14:44)You're welcome :-)
Please remember to mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309 -
Will upgrading to mountain lyon solve having lost the reinstall DVD?
I have a mac book pro and I lost my reinstall DVD, as I have to pay to get them, I was thinking of upgrading to mountain lyon. Will that be like reinstalling or will that be more problematic.
ThanksYes it is compatible so with will not delete it or render it unusable.
See this article to make sure you have 2008 or later.
http://www.macrumors.com/2012/07/25/microsoft-confirms-office-2011-and-2008-comp atibility-with-os-x-mountain-lion/http:// -
[solved] chromium lost its panel icon
I'm running latest arch and slim+openbox+tint2; after updating to chromium-43.0.2357.65-1-x86_64 I find that tint shows a generic icon and not the expected blue and white chrome thing. Checked by downgrading to chromium-42.0.2311.135-1-x86_64 and that does show the icon. There is an icon=chromium in /usr/share/applications/chromium.desktop and it seems to be identical to earlier version. The icon does appear in my openbox menus. All the icon files appear to be present in the filesystem.
Edit: fixed in 43.0.2357.81-1
Last edited by replabrobin (2015-05-26 22:10:29)KDE5 still showing the icon for me. There is a similar thread about the same version of google chrome, so it's probably related.
-
[SOLVED] LXDE lost suspend feature
Not sure what I did or how it happened but now, there is not a suspend feature in my logout box for LXDE nor is my laptop suspending on lid close any more.
I did install pm-utils and acpid but no avail.
Any ideas?
thanks!
Last edited by shushu (2012-02-20 23:29:47)shushu wrote:yes, well actually, I need to enter 'sudo pm-suspend' as otherwise it tells me that only root can do that. But yes, it does suspend and resume that way.
That's not the same. LXDE probably works through console-kit. Sudo just runs stuff as root. -
[Solved] tmpfs lost half of its real space
Hello,
My RAM is 16 Gb, but the system sees only half of that
$ df -H /tmp/
Filesystem Size Used Avail Use% Mounted on
tmpfs 8.4G 16M 8.4G 1% /tmp
$ free -h total
total used free shared buff/cache available
Mem: 15G 1.3G 2.0G 47M 12G 13G
Swap: 0B 0B 0B
Even copying files bigger than 8.5 Gb it will complain disk full
Maybe I'm misunderstanding how the memory is managed
Last edited by TheSaint (2015-05-12 02:43:57)falconindy wrote:Semi-related: ramfs != tmpfs
I corrected the title
$ df -H /tmp/
Filesystem Size Used Avail Use% Mounted on
tmpfs 13G 4.2G 8.5G 34% /tmp
$ cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
LABEL=Linux64 / ext4 defaults 1 2
tmpfs /tmp tmpfs nodev,nosuid,size=75% 0 0
Last edited by TheSaint (2015-05-12 02:45:39) -
SOLVED! Lost my system tray!
Not sure what I did, but my system tray (you know, the place where the speaker icon displays) disappeared! I've searched the forum and the wiki and not come across anyone else who made this bonehead mistake (lol). Please, if anyone knows how to get it back, I'd sure appreciate knowing. And if you can make a guess what I did to make it go away, that would be helpful too. Don't want to make the same mistake again!
Thanks in advance for any assistance.
Tim
Last edited by trobins (2009-04-13 01:46:46)trobins wrote:
Not sure what I did, but my system tray (you know, the place where the speaker icon displays) disappeared! I've searched the forum and the wiki and not come across anyone else who made this bonehead mistake (lol). Please, if anyone knows how to get it back, I'd sure appreciate knowing. And if you can make a guess what I did to make it go away, that would be helpful too. Don't want to make the same mistake again!
Thanks in advance for any assistance.
Tim
Might help if you atleast tell us what window manager / desktop environment your are using
Maybe you are looking for
-
How do I find the size of a video file in iTunes store?
Is there any way to find out how big a video file is before I download it to my computer? I see that movies show the file size in the product description, but what about episodes of a TV show? Or a complete season? Or a video in iTunes U? I tried "ri
-
Has anyone had problems downloading itunes 10.1 with the generation 6 nano? I have Windows Vista on my computer. Was able to install version 8.1 but nano needs newest version. Help anyone???
-
I deleted my message application. how do i get the shortcut back?
i hit the apps and they started moving and the x's appeared for me to delete them/move them. my text message app deleted- how do i get it back on my phone. the short cut?
-
Windows error 127 when trying to download itunes
I have been trying to download iTunes for 2 days now. I have been on the forums and have followed all the instructions for deleting everything 'apple' from my computer and reloading iTunes. Nothing has worked. I don't understand why this is happen
-
Hi Experts, I am a buyer. i am facing problem in rescheduling cases. I want to analyze in mass the MRP dates and the reschedule dates with the exception messages. I tried Md06 but it does not give the comparison between the MRP dates and reschedule d