[SOLVED] KSP Running Extremely Slow
So I can't really pinpoint the problem but Kerbal Space Program is running very slow. I have turned all the graphics settings down in the game as low as possible, but with resonably sized rockets and space stations the game is pretty much unplayable. I have an AMD A10-5800K APU and 6GB RAM. My last computer had an AMD Phenom II and it ran the same simulations just fine (on Ubuntu). I was wondering if there was some setting I am missing or something slowing down my CPU because from what I have been reading online, others are playing just fine with the AMD A10. I can provide more system info on request but didn't really know where to start let alone what info is needed. Any suggestions at all will be appreciated. Thank you.
Last edited by whahn1983 (2013-08-20 06:01:38)
7660 is a lot more slower than 6970.. and its using only ddr3 also.
but i dont think it should be the reason why its extremly slow
my bet is that this hardware isnt well supported with the opensource drivers yet.
if you have the possibility to try those (buggy) fglrx drivers and see the results then.
and report back.
Similar Messages
-
How come my ps CS6 runs extremely slow?
After testing photoshop cs6, seeing how fast it worked on 3D on my pc I bought the web design and premium version. Time in between was several weeks. To my huge disappointement, the bought version runs extremely slow, mostly on 3D when I want to paint on target texture. Secondly I experiance a bug when I open my file and want to paint on targeted texture....brush shows inaccesible when wanting to paint. I do not mean greyed out, but the moment I hover over my 3d object it shows I cant paint (yes I have my layer selected;-). I have to fix this each time by changing targeted texture to some other and again switching back to the one I actually want to edit. As last thing, my OpenCL is greyed out.....maybe that causes the speed problems.....did not check with trial if it worked so not sure this is the issue=/....
When it comes to the speed I tried several things and now even reinstalled my whole pc hoping that would solve the problem.....it did not. Both CS6 photoshop 32-and 64-bit run slow on 3D.
I closed my trendmicro virusscanner to see if that would help....it speeded up only the start-up process but not the 3D. 3D works so slow that I have to wait 10 minutes after each move..just crazy....evenmore as it worked awesome with the trial version.
Also changed amount of memory assigned to ps by increasing to 80% and even 100%...nothing.
changed in graphic processors settings advanced into basic...nothing again.
No idea what to do next besides buying a new computer....I know I do not have a super strong one but as it worked perfectly I just don't get it. My pc runs this system:
Intel(R) Core (TM) 2CPU
[email protected] 2.66 Ghz
Ram 4GB
Windows 7 Ultimate 64-bit
GeForce8800GTX
I have the feeling it is some conflict between an update of windows or graphic driver (I have the newest so my info tells me) and photoshop...any ideas what to do as this is extremely frustrating?
THANK YOU IN ADVANCE FOR ANY HELP
In case it helps this is the copied system info from photoshop:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2660 MHz
Built-in memory: 4030 MB
Free memory: 2858 MB
Memory available to Photoshop: 3432 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 8800 GTX/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce 8800 GTX
OpenCL Unavailable
Driver Version: 8.17.12.9573
Driver Date: 20120209000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800 GTX
Video Card Memory: 768 MB
Video Rect Texture Size: 8192
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 488,3G, 448,7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
12-08-2012
Installed newer graphic driver as its seemed Microsoft update had an older one installed on my pc. This one is straight from Nvidia site with 3D support. Nevertheless ps runs slow and especially 3D. 32 Bit runs tiny bit faster than 64-bit. Now my photoshop even crashes with 3D: 32 bit holds out longer then 64...last one freezes almost immediately and I can close it through task manager. After installing newer driver at least the 64 bit shows OPenCL , where 32-bit not....maybe thats normal...
I hope anyone can help me as I even checked the system requirements on adobe and mine should be more than fine.
Message was edited by: NethergirlWell, it must be a system-specific bug of some sort that's been introduced, because I was able to create a 4200 x 3500 image made by mapping an image of similar size to a cylinder, and the cylinder would move/rotate in real time. Of course, I have a completely different video card and system than you do, but I'm just verifying that it's not broken everywhere.
Rendering isn't hugely fast, but that's not unexpected with a larger image.
Maybe being more specific would help. Is your mesh complex?
Is it something you'd be willing to share online or describe how to create? I would be happy to try to match what you're doing more thoroughly to see whether I can reproduce the slowdowns.
Beyond that, I'm not sure what to suggest... You don't have a lot of RAM to be working on 15 megapixel images, but as you say the thing to concentrate on is that you're seeing quite different performance from the Ps CS6 beta version.
-Noel -
Hello
When I open my macbook it is running extremely slow - especially once I launch safari. It can take minutes to load a page or for a page I am already typing on to even respond. I have pasted below part of my log from the application - Console. I have not included all of it as it was 7 pages long but please let me know if you need further information. Thank you for any help!
7/01/14 4:01:54 AM mDNSResponder[18] mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
7/01/14 4:01:54 AM com.apple.SecurityServer[24] Session 0x5fbff962 created
7/01/14 4:01:54 AM com.apple.SecurityServer[24] Entering service
7/01/14 4:01:54 AM kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
7/01/14 4:01:54 AM kernel AGC: 2.10.6, HW version=1.9.21, flags:0, features:20600
7/01/14 4:01:54 AM kernel Previous Shutdown Cause: 5
7/01/14 4:01:55 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
7/01/14 4:01:56 AM kernel NVDANV50HAL loaded and registered.
7/01/14 4:01:56 AM kernel DSMOS has arrived
7/01/14 4:01:56 AM configd[14] bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
7/01/14 4:01:56 AM configd[14] DHCP en1: INIT-REBOOT transmit failed
7/01/14 4:01:56 AM configd[14] network configuration changed.
7/01/14 4:01:56 AM configd[14] setting hostname to "Ashlee-Robertsons-MacBook-Pro.local"
7/01/14 4:02:00 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
7/01/14 4:02:02 AM kernel en1: 802.11d country code set to 'DE'.
7/01/14 4:02:02 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
7/01/14 4:02:02 AM bootlog[53] BOOT_TIME: 1389029506 0
7/01/14 4:02:07 AM blued[16] Apple Bluetooth daemon started
7/01/14 4:02:07 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
7/01/14 4:02:07 AM kernel Auth result for: e0:46:9a:18:22:10 MAC AUTH succeeded
7/01/14 4:02:07 AM kernel AirPort: Link Up on en1
7/01/14 4:02:08 AM kernel AirPort: RSN handshake complete on en1
7/01/14 4:02:09 AM configd[14] network configuration changed.
7/01/14 4:02:09 AM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[41] Login Window Application Started
7/01/14 4:02:09 AM com.apple.usbmuxd[33] usbmuxd-323.1 on Oct 3 2013 at 12:43:24, running 64 bit
7/01/14 4:02:10 AM com.eltima.ElmediaPlayer.daemon[60] Elmedia Player: Driver launched... Error code 0
7/01/14 4:02:10 AM org.apache.httpd[28] httpd: Could not reliably determine the server's fully qualified domain name,
7/01/14 4:02:10 AM rooksd[59] 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
7/01/14 4:02:10 AM rooksd[59] kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
7/01/14 4:02:10 AM rooksd[59] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
7/01/14 4:02:10 AM rooksd[59] Window Server is not available.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 -MacBook-Pro.local rooksd[59] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 -MacBook-Pro.local rooksd[59] <Error>: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 -MacBook-Pro.local rooksd[59] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 Ashlee-Robertsons-MacBook-Pro.local rooksd[59] <Warning>: Window Server is not available.
7/01/14 4:02:10 AM rooksd[59] kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
7/01/14 4:02:10 AM rooksd[59] Window Server is not available.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 MacBook-Pro.local rooksd[59] <Error>: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
7/01/14 4:02:10 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:10 -MacBook-Pro.local rooksd[59] <Warning>: Window Server is not available.
7/01/14 4:02:09 AM kernel Stat: 6/6
7/01/14 4:02:11 AM com.apple.launchd[1] (com.apple.xprotectupdater[31]) Exited with exit code: 252
7/01/14 4:02:11 AM com.apple.SecurityServer[24] Session 0x424912 created
7/01/14 4:02:11 AM com.apple.SecurityServer[24] Session 0x424912 attributes 0x30
7/01/14 4:02:12 AM loginwindow[41] Login Window Started Security Agent
7/01/14 4:02:12 AM WindowServer[86] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
7/01/14 4:02:12 AM SecurityAgent[108] Showing Login Window
7/01/14 4:02:14 AM rooksd[59] Window Server is not available.
7/01/14 4:02:14 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:14
7/01/14 4:02:14 AM rooksd[59] Window Server is not available.
7/01/14 4:02:19 AM rooksd[59] Window Server is not available.
7/01/14 4:02:19 AM rooksd[59] Window Server is not available.
7/01/14 4:02:19 AM com.trusteer.rooks.rooksd[59] Tue Jan 7 04:02:19
7/01/14 4:03:01 AM StatusMenu[152] Attempting to monitor /Library/Application Support/WDSmartWare
7/01/14 4:03:01 AM StatusMenu[152] Monitoring /Library/Application Support/WDSmartWare
7/01/14 4:03:06 AM rapportd[145] *** __NSAutoreleaseNoPool(): Object 0x2816cb0 of class NSCFString autoreleased with no pool in place - just leaking
7/01/14 4:04:26 AM kernel Safari (map: 0x8dc80a4) triggered DYLD shared region unnest for map: 0x8dc80a4, region 0x7fff88a00000->0x7fff88c00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
7/01/14 4:07:52 AM [0x0-0x15015].com.apple.Safari[167] at sun.plugin2.main.server.MozillaPlugin.getCachedSiteData(MozillaPlugin.java:504)
7/01/14 4:07:53 AM [0x0-0x15015].com.apple.Safari[167] Exception in thread "main" java.lang.NullPointerException
7/01/14 4:07:53 AM [0x0-0x15015].com.apple.Safari[167] 2014-01-07 04:07:53.784 PluginProcess[189:903] *** __NSAutoreleaseNoPool(): Object 0x300140 of class NSCFDictionary autoreleased with no pool in place - just leaking
7/01/14 4:09:12 AM kernel (default pager): [KERNEL]: Switching ON Emergency paging segment
7/01/14 4:09:16 AM kernel (default pager): [KERNEL]: System is out of paging space.
7/01/14 4:12:11 AM kernel (default pager): [KERNEL]: Switching ON Emergency paging segment
7/01/14 4:12:56 AM /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[149] No valid tickets, timing out
7/01/14 4:13:56 AM kernel (default pager): [KERNEL]: System is out of paging space.
7/01/14 4:21:45 AM kernel (default pager): [KERNEL]: Recovered emergency paging segment
7/01/14 4:23:41 AM Safari[192] IPCClient: Server port 0 is invalid; looking it up again...Start by removing "Rapport" and "Elmedia Player," both of which are much worse than useless. If there's no improvement, post again.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
Back up all data before making any changes.
You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?
when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Ok so I'm a design student at a community college (about to graduate soon and will be continuing on getting my BFA) I have all of the creative cloud suite. I have Illustrator, Photoshop, Lightroom, InDesign, etc. Recently I started having problems with all of the programs. Whenever I work in the programs they would run extremely slow. Recently, I tried to save a .eps file that was only about 1.2 GB and it took me an hour to save, and this was when I was working off of my computer desktop. When I place the .eps file in Indesign, everything would go blank and it would freeze up. Also I had an error sign popping up from InDesign saying "out of memory". Im not sure if that is related to my computer's hard drive or indesign itself. I just started using creative suite so the creative suite is pretty new to me. Sometimes in Indesign when I do the Command+w to preview the whole project, it would be completely black and showing nothing and I would hit escape and the whole software screws up. Then I would do a force quit on the software and then Indesign would say there was a serious error and must shut down. That error message has been popping up several times now. I also talked to Apple support and they suggested me doing a Repair disk utility (which I am currently doing right now) and also recommended me contacting Adobe since they know their software. I checked software to see if there is any updates that is needed but everything is up to date. I'm not quite sure why its acting like this so I'm reaching out both to Apple and Adobe to see if both can help me solve the problem. If anybody had experienced this problem before and could help me troubleshoot this issue that would be great.
I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
All design programs running extremely slow and takes forever to save and sometimes shuts down randomly? -
Macbook Pro 15" Late 2011 - Running Extremely Slow
I've only had my Macbook Pro for about 9 months. Lately it's been running EXTREMELY slow, and freezing up at some times. I have a RAM monitor, and it will sometimes drop below 192MB! I have 4GB installed, and I only run a few light-weight applications, No Final Cut, or Photosop. On a typical day I'll have the following open at once: Safari, Spotify, Minecraft, Mail, Messages
Nothing 4GB can't handle right? I guess not. I don't download from untrusted websites, so I doubt it's a virus. I honestly have no clue. I don't have the Apple Care, and I'm not sure if this is covered in the 1yr limited warranty that is included with the computer. Hopefully someone can help me resolve this issue.
Thanks,
Caleb.cdh0127
Re: Macbook Pro 15" Late 2011 - Running Extremely Slow
09-Mar-2013 23:49 (in response to pennbank)
I know how computers work.
Oh Sorry Thought you were asking for assistance in solving a problem with your computer -
Macbook Pro running extremely slow with version OS X 10.10.2
Since updating to Yosemite, version OS X 10.10.2 on my 2010 MacbookPro, it has been running extremely slow in all applications. Everything from booting up and shutting down to getting mail open, printing or using Safari takes a long time! Lots of beach balls spinning and other delays. I have 4 GB of memory and 2.66 GHz Intel Core 2 Duo.
When you see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Machine running extremely slow
I am noticing my machine is running extremely slow. Even with out any Apps open my system memory is only at around 30% so not sure where the band width hog is? Looking at the activity monitor there are allot of things going on / most of which I do not know what they are.
I just ran an EtreCheck - does anyone here know of a way I can stream line my system to run faster and not chock so much?
Thanks
> j
EtreCheck Report:
EtreCheck version: 1.9.15 (52)
Report generated September 27, 2014 at 12:04:09 PM EDT
Hardware Information: ?
MacBook Pro (17-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,2
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1920 x 1200
AL2016W 1680 x 1050 @ 60 Hz
NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:52:17
Disk Information: ?
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (93.33 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information: ?
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
LGE Nexus 5
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ?
Seagate GoFlex Desk Mac 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted>: 209.7 MB
Backup Disk 2 (SuperDuper) (disk2s2) /Volumes/Backup Disk 2 (SuperDuper): 2 TB (1.62 TB free)
Seagate GoFlex Desk Mac 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
Backup Disk 1 (Time Machine) (disk1s2) /Volumes/Backup Disk 1 (Time Machine): 2 TB (1.47 TB free)
Configuration files: ?
/etc/sysctl.conf - Exists
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
Startup Items: ?
ColdFusion8: Path: /Library/StartupItems/ColdFusion8
ColdFusion9: Path: /Library/StartupItems/ColdFusion9
IPSecuritasDaemon: Path: /Library/StartupItems/IPSecuritasDaemon
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[failed] com.vmware.launchd.vmware.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.brother.LOGINserver.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[running] com.seagate.SeagateStorageGauge.plist Support
User Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.akamai.client.plist Support
[not loaded] [email protected]
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.shirtpocket.backupbytime.plist Support
User Login Items: ?
FontAgent Activator
Dropbox
Internet Plug-ins: ?
LogMeInSafari64: Version: 1.0.496 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
RealPlayer Plugin: Version: Unknown
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
LogMeIn: Version: 1.0.496 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: Unknown
iPhotoPhotocast: Version: 7.0
LogMeInSafari32: Version: 1.0.496 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
FAPPreferences Support
MultiBrowser Support
MySQL Support
Time Machine: ?
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 378.04 GB
Destinations:
Backup Disk 1 (Time Machine) [Local] (Last used)
Total size: 2 TB
Total number of backups: 82
Oldest backup: 2013-10-31 21:32:48 +0000
Last backup: 2014-09-21 19:05:03 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
13% mtmfs
8% firefox
5% WindowServer
3% backupd
3% Creative Cloud
Top Processes by Memory: ?
526 MB mds_stores
434 MB firefox
254 MB com.apple.IconServicesAgent
156 MB plugin-container
98 MB WindowServer
Virtual Memory Information: ?
3.80 GB Free RAM
2.70 GB Active RAM
444 MB Inactive RAM
836 MB Wired RAM
624 MB Page-ins
0 B Page-outsI don't read "etrecheck" reports.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My mac desktop 09 is running extremely slow
my Mac is running extremely slow could it be iphoto causing it? its at 70GB
First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Laptop runs extremely slow has since the day I bought it. Games crash, flash player crashes several times a day.
This question was solved.
View Solution.kjune wrote:
Laptop runs extremely slow has since the day I bought it. Games crash, flash player crashes several times a day.
You have two problems going on here...
1. Everyday laptop aren't made for hardcoregaming and overheating will cause your system to crash or freeze or lockup.
2. Flash problem would indicate corrupt installation files...
1. Get a Gaming laptop that will cost you 2000US or above
2. Reinstall flash...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
My phone is running extremely slow and eating the battery
I've been experiencing this problem for the past 3 days and went to my provider today to ask about.
My phone has been running extremely slow, the hour clock thing is forever running, and as a result my phone dies in about 3 to 4 hours with no real use. I was told it was because i need to update my OS but when I came home and plugged it in it says that my phone is up-to-date and there is no OS upgrade available. i bought a replacement battery to see if that was the problem and it is not. this is becoming quite frustrating. it has even gotten to the point of when i lock the phone i cant unlock it over even get the screen to turn on. the only way to turn it on is to pull the battery out and put it back in.
What is wrong with my phone?
Solved!
Go to Solution.Hello maddy 22
Welcome to the Community
That Hour clock appear because of many reason like running application in the background , low memory etc. As your device is already upto date so to resolve the issue please Reload your Device OS it will fix the problem ,follow this Knowledge base :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows .
After Reloading your Device Software you must go through this Knowledge Base , because it will help you in long run and to avoid such problem in future.
KB14320 How to maximize battery life and free memory on the BlackBerry smartphone.
Please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Phone is running extremely slow and eating the battery
I've been experiencing this problem for the past 3 days and went to my provider today to ask about.
My phone has been running extremely slow, the hour clock thing is forever running, and as a result my phone dies in about 3 to 4 hours with no real use. I was told it was because i need to update my OS but when I came home and plugged it in it says that my phone is up-to-date and there is no OS upgrade available. i bought a replacement battery to see if that was the problem and it is not. this is becoming quite frustrating. it has even gotten to the point of when i lock the phone i cant unlock it over even get the screen to turn on. the only way to turn it on is to pull the battery out and put it back in.
What is wrong with my phone?Hello maddy22,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Problem description:
Mac is running extremely slow. Get the scrolling pointer icon every time I click something.
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 7:43:19 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 442
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 9:39:51
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (177.71 GB free) - 112 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.Affinegy.InstaLANa.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[failed] com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
Belkin Router Monitor Application (/Applications/Belkin/Belkin Router Monitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
Silverlight: Version: 4.0.60531.0 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 141.13 GB
Destinations:
Back up [Local]
Total size: 250.06 GB
Total number of backups: 7
Oldest backup: 2012-08-25 14:58:25 +0000
Last backup: 2015-02-04 23:30:59 +0000
Size of backup disk: Too small
Backup size 250.06 GB < (Disk used 141.13 GB X 3)
Top Processes by CPU: ℹ️
14% mds
6% WindowServer
0% fontd
0% AppleSpell
0% notifyd
Top Processes by Memory: ℹ️
391 MB softwareupdated
185 MB mds_stores
137 MB com.apple.WebKit.WebContent
129 MB Finder
99 MB Safari
Virtual Memory Information: ℹ️
244 MB Free RAM
1.88 GB Active RAM
974 MB Inactive RAM
1.08 GB Wired RAM
34.01 GB Page-ins
130 MB Page-outs
Diagnostics Information: ℹ️
Feb 3, 2015, 09:59:28 PM Self test - passedPerform SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
The try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Ciao. -
Macbook Pro running extremely slow
While still on Mavericks my Macbook Pro 13 mid 2010 (2.4 Intel core 2 duo) sporadically began running extremely slow functions, even the mouse cursor moved in jolts and steps, to type a word in google search engine I had to wait a few seconds after being typed for the word to appear on screen. The internal speaker volume responds 10 seconds after tapping the buttons on the keyboard. Videos are unplayable in netflix and other sites because picture freezes and runs in jolts and steps. Its Not the internet connection or the streaming.
I upgraded to Yosemite to see if this would fix the problem, I upgraded the darned adobe flashplayer believing maybe I needed the latest software available for my programs for the computer to run smoothly. I upgraded the RAM to 8GB from 4GB and did not fix the problem. I have more than half of the 500GB hard drive with free space. I'm getting a Java Runtime Environment download prompt to view properly something every time I boot the computer. The "slowness" comes and goes. But it gets more frequent and worse each day. I can't work. Could it be some type of malware that makes the computer slow? I can't identify a specific malware to address and remove. Could it be that the fan isn't working properly and runs slow when its too hot?? Please HeLP!!a very good and quite current discussion on the issue is here > Mac slow after Yosemite 10.10.1 up-grade - kernel task? - the best of the best here in the forum weigh in here. - Feliz Navidad - ÇÇÇ
-
Ever since my upgrade to lion 10.7.3, and iCloud, my macbook is running extremely slow. What can I do? It doesn't seem like my contacts are pushing through to the computer from iPhone.
Then your basic issues are: too little RAM, incompatible software, dysfunctional installation.
Add more RAM or kill as many programs that you use until the computer is running normally.
See App Compatibility Table - RoaringApps. Upgrade any old software.
Reinstall OS X:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Maybe you are looking for
-
How to change order data in APO
Hi, I am keen to know on ways to change order data in APO say order category BI.....we want to change date by taking input from cif user exit APOCF006.We need this information for the ongoing project. I know two options...1) using BAPIs 2) Not very
-
Configure wired and wireless router together
Hello, I bought a WRT54G wireless router and I want to connect it to my wired router (Linksys BEFSR41 v2) and I don't know where to begin? I tried to connect the cable in the "Uplink" connection on the wired router and in the "Internet" connection in
-
I have an airport snow that my ibook has been connecting to, but my Dell inspiron 600m can't. It reads the airport, but has limited or no connectivity and when I try to repair it's not reading the IP address. Any ideas?
-
HOW DO I TAKE THE LOCK FROM TURNING THE SCREEN AROUND?
-
Dear all, I have a mapping requirment based on IDOC Segment to SOAP. My IDOC Structue is like this: Source Target segement1: itemA itemB itemC ID itemD Segement2: itemD itemE Des