[Solved]Kwin doesn't restore Suspend desktop effects for full screen

Hi! I am using latest Kwin with Plasma 5 on my Arch and I have noticed that I have to check "Suspend desktop effects for full screen windows" in Desktop Effects>Advanced every time I log in.
What's wrong with Kwin?
Solved: Kwin 5.2 is under development now so currently this functionality is not availible.
Last edited by artem.jackson (2015-02-19 00:41:43)

It saves the state for my NVIDIA blob but does not for Intel laptop. It also warns that not every setup is able to redirect, so maybe he thinks our cards are unsupported and unchecks it?

Similar Messages

  • [SOLVED] Just installed KDE 4.6, desktop effects don't work.

    When I try to enable KDE's desktop effects the screen goes haywire and everything is black with nasty distorted lines. Then everything returns after a little while and KDE shows a popup notification saying that "desktop effects were too slow and have been suspended...".
    I'm pretty sure my xorg.conf is configured perfectly, I've read everything there is to know about that. I was previously on Gnome with Compiz working flawlessly, so I have a feeling its not a video problem. There's always a small chance I could be wrong though.
    Could it be a video driver problem? If so, what should I do about that?
    Any idea what might be wrong?
    Last edited by amadar (2011-04-24 23:25:03)

    I'm using xf86-video-ati with my ATI card.
    I initially tried Gnome, but for some reason, gnome-shell just wouldn't start, so that why I ended up trying KDE. Once in KDE, i had this described problem.I couldn't fix it, and it was crashing (100% CPU usage sometimes), so I switched back to Gnome 3 to attempt to get the shell running. Finally, I figured out that you must not add "nomodeset" to the kernel boot line in order for gnome-shell to work, so I removed that from the end of my line and gnome-shell worked!
    It might be possible that this is the solution for the KDE graphic problem as well... I'm testing it right now, i'll be back to post it after the restart...
    Last edited by amadar (2011-04-24 23:03:03)

  • Changes to desktop effects freezes the screen

    Recently I installed Arch linux and Kde for the WM.
    I am currently using "KDE Platform Version 4.5.1 (KDE 4.5.1)"
    The desktop effects "composting" works but everytime I make a small change to any of the settings the screen freezes for an idefinite amount of time! and when this happens I have to do ctrl+alt+F1 and go to the command line and kill X and then re-enable composting !
    Can anyone tell me why this is happening? what should I do to rectify this?
    I am having an Intel onboard G41 chipset.
    I installed "xf86-video-intel" driver.

    bashphoenux wrote:what does "this" refer to ???
    I was referring to the problem you reported "the screen freezes for an idefinite amount".
    I thought it sounded like this:
    https://bbs.archlinux.org/viewtopic.php?id=103522
    Look at the mail mesage in the link in the 4th post.
    Last edited by loafer (2010-09-07 15:15:27)

  • Xserver-1.5.3 doesn't reset resolution after ending a full screen game

    xserver-1.5.3 doesn't reset display resolution after ending a full screen game.
    Is this a issue of the new xserver or the ati driver (i switched from catalyst to xf86-video-ati)?
    And how can i solve it?
    so long
    ukognos
    Last edited by ukognos (2008-11-30 18:01:19)

    I have the same problem with catalyst 8.11 . On the game, if I change the resolution, the game halt.
    I have Kde4 and a ATI HD 3450 and lastet upgrade...

  • Command-L doesn't work for full-screen PDF under Mac

    In Adobe Reader, users can use Ctrl-L to view PDF in full screen under Windows (Cmd-L under Mac);  in AIR, Ctrl-L still works under Windows but Cmd-L doesn't work under Mac. Is this a bug or the short-cut is intentionally disabled?

    Hi If using command r did not get you to the recovery partition, you ether don't have it or the drive is corrupt and it wont open.And you also tried option and only got the startup volume. You could try option r. Are you able to boot into your desktop? Or use another mac. You should be able to use you apple id to look in purchases and re-download Lion. Then if you can using at lest a 10 Gig thumb drive copy the lion download as bootable to it and use that to repair your disk. If you get it downloaded do not open it. until you copy it.http://www.macworld.com/article/1161069/make_a_bootable_lion_installer.html

  • Unable to use show desktop gesture in full screen

    Hello,
    I save a lot of temporary items to my desktop.  I also use full-screen mode for nearly everything and I find it a bit frustrating that I can't just gesture back to the desktop. If I swipe to another desktop, I don't have the same saved items.
    Anyone have suggestions for a workaround?

    Ahh figured it out.  But my hot corner for show desktop still doesn't work when in full screen.  Any other suggestions?

  • I can't restore my toolbars and the "full screen" mode button is NOT at the top right-hand corner of my browser (or anywhere else)

    My toolbar and menu is gone from Firefox. I have tried closing the browser and opening new ones and all the suggestions in the help forums on this website (as well as several others). Pressing "alt", "F10", "F11" and SEVERAL other things have NOT helped.
    There is no full screen mode button anywhere on my browser and when I put my cursor at the top of the window, NO menu options appear at all.
    I normally would quit Firefox but the icon won't appear in my dock and my computer won't let me eject the application (to download again) because apparently it's in use (even when I've closed all windows).

    F11 doesn't work on a Mac to toggle full screen mode.
    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
    *https://support.mozilla.org/kb/how-to-use-full-screen

  • Poor performance for full screen desktop

    Hi,
    Full screen desktop ( displayed as Kiosk ) of Linux with gnome ( I believe it's the same for all window managers ) is poor ( even with command as ls you see the delays ).
    It happens on the local network. Connection to the application server is SSH.
    SGD server - Solaris 10 , Sun Fire 280. Application server is regular modern PC.
    Regular windows performance is very good.
    Any suggestions ?
    Thanks

    I think you will find the poor performance is only with GTK applications.
    For example, if you go into a large directory of files, and do an ls -aRl, you will notice it is a lot slower with a gnome-terminal than it is with a plain xterm.
    I think 4.3 will resolve this performance issue.

  • Cursor doesn't disappear for full-screen movies.

    I believe it only happens when I'm watching something streamed over the internet. It's not limited to the web browser I'm using though. It also disappears sometimes, but very rarely. I thought it was a problem with my iMac but it's happening on my new MacBook Pro too. Anyone know why?

    Is the mouse connected directly to the Mac Pro  or a third party hub?
    And have you tried a different USB port?

  • Safari 5.0.2 doesn't hide menu bar with flash full screen mode

    I have scoured these forums and others for an answer. I have deleted every little bit of Safari and Adobe/Macromedia/Flash preference file. I even tried using an older backup, which worked until I updated Safari on it.
    The menu bar won't go away!
    Is this a well known problem, or am I an unlucky slob?

    Unlucky so far, I'd say.
    So, picking something in particular so we're on the same page... does this refuse to hide the bar too?
    Is a New User Account the same ?

  • Show desktop not working in full screen app

    The thumb & three finger swipe to show the desktop does not work for me if the screen is filled with a full screen app. If hte app is not full screen then the gesture works.
    Is this  a bug, does anyone else get this, what use is the gesture if it doesn't work with full screen apps??!
    TIA,
    J

    John,
    No, the gesture doesn't work in full screen since technically there isn't a desktop under the full screen app.  I just swipe to an adjacent desktop.
    Regards,
    Captfred

  • BlackBerry Desktop Mananger for Mac Hangs

    When I open the BlackBerry Desktop Manager on my Mac (10.5.8), it hangs and eventually crashes. This configuration has worked perfectly for the last couple years, but started hanging today.
    I tried uninstalling, then reinstalling the Desktop Manager, but there was no change.
    In my Console log, the following appears before it crashes:
    Feb 28 22:42:53 Debras-MacBook-2 BlackBerry Desktop Software[266]: NSExceptionHandler has recorded the following exception:\nNSUncaughtSystemExceptionException -- Uncaught system exception: signal 10\nStack trace:  0xf9c21e  0x953a81cb  0xffffffff  0x9546775c  0x951d517a  0x9508d7e4  0x95114264  0x21234a  0x3af9  0x94ffc42a  0x94f1247a  0x94f12753  0x94ff9680  0x95002ed8
    Please help!

    Just playing around to see if I could try something different to figure out the "delete 25%" issue.  I noticed that you mentioned in your original post that you had set your BB to keep appointments forever.  Well I thought that I had done the same.  It turns out that I had not!  This evening I have set my new BB to keep appointments forever and I have had success in sync-ing.  I have made some test entries and they are working out OK so far without any hangups. I am reluctant to say that I have solved my problems with sync and Desktop mgr for Mac but I will try some things over the course of the next few days and see if I go forward problem free.  I will report again in a few days.  In the meantime, I am keeping my fingers crossed!   

  • Full screen Visual Effects only to 640x480

    I have a problem with itunes visual effect. I have an ati radeon x600pro 256MB video card, my resolution is 1280x1024, 70Hz.
    if I see visual effect in itunes window it's all ok, but if I want visualize visual effect in full screen mode my resolutions change to 640x480.
    how can i do to view it at my resolutions 1280x1024?

    For now, that setting cannot be changed. I believe it's 800x600 by the way. That's just the way iTunes' visualiser is coded at this time.

  • Intel video + desktop effects used to work... now it doesn't.

    I'm using kde-mod and I'm not sure what happened, but in the last week or two, desktop effects (compositing) has stopped working, and when I drag windows around, there are artifacts and such now.  It didn't used to be this way and worked quite well before.  I'm using the intel video driver... the card is a fairly recent gmasomethingorother.  I really have no idea what to do next. 
    Here's xorg.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux zeeARCH 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
    Build Date: 28 May 2009 10:40:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 30 16:12:04 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (==) No device specified for screen "Screen0".
    Using the first device section listed.
    (**) | |-->Device "name"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "DontZap" "false"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4200000/1048576
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.7.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "true"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xF4400000
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (==) intel(0): Using EXA for acceleration
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Resizable framebuffer: not available (1 3)
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using user preference for initial modes
    (II) intel(0): Output LVDS using initial mode 1680x1050
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 32764 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3400bd00 to 0x6603ed00
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Loading sub module "dri2"
    (II) LoadModule: "dri2"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 735744 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 2942972 kB available
    (WW) intel(0): DRI2 requires UXA
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xf4400000
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 36126720 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000
    (II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000
    (II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: XF86DRI Enabled
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) ThinkPad Extra Buttons: always reports core events
    (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
    (II) ThinkPad Extra Buttons: Found keys
    (II) ThinkPad Extra Buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) Option "Emulate3Buttons" "true"
    (II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
    (**) Option "EmulateWheel" "true"
    (**) Option "EmulateWheelButton" "2"
    (**) Option "EmulateWheelTimeout" "200"
    (**) Option "YAxisMapping" "4 5"
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) Option "XAxisMapping" "6 7"
    (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz)
    (II) intel(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz)
    (II) intel(0): EDID vendor "IBM", prod id 10375
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0x2a804000
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000bd000000 physical
    (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
    (II) intel(0): 0x01fff000: end of stolen memory
    (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
    (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x01fff000: start of memory manager
    (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
    (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
    (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
    (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
    (II) intel(0): 0x0d78b000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    Here is xorg.conf  (I know it's shit :-)  ) 
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    Option "AIGLX" "true"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "name"
    Driver "intel"
    Option "XAANoOffscreenPixmaps" "true"
    Option "DRI" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1680x1050" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    Section "ServerFlags"
    Option "DontZap" "false"
    EndSection

    Ok I finally figured it out, well sort of. The issue was that the Netgear was screwing up the DHCP. I new it had to be the the Netgear because the setup worked fine at a friends with a Linksys. The strange thing was that iTunes could see other libraries but not connect even though a ping could not. So I turned off the DHCP server and assigned manual IP's to all the clients. Didn't work, I could see the other clients and share files but the internet was lost. Weird. Next I turned DHCP back on and reset the entire network back to my original configuration. Works like a charm. I don't really know what the issue is and the solution doesn't stick, but it can be replicated without fail. Thanks to everyone.

  • [Solved] KDE Desktop Effects no longer working

    Hello,
    I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
    I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
    "For technical reasons it is not possible to determine all possible error causes.
    Desktop effect system is not running."
    For the record, I am on a Thinkpad X201 with intel graphics.
    Any ideas?
    Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)

    Some Extra information:
    I just tried a restart, that didn't work.
    I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
    Application: KWin (kwin), signal: Aborted
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    To enable execution of this file add
    add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
    line to your configuration file "/home/perry/.gdbinit".
    To completely disable this security protection add
    set auto-load safe-path /
    line to your configuration file "/home/perry/.gdbinit".
    For more information about this security protection see the
    "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
    info "(gdb)Auto-loading safe path"
    [Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
    Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
    #0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
    #1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
    [KCrash Handler]
    #5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
    #6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
    #7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
    #8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
    #9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
    #10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
    #11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
    #12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
    #13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
    #14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
    #15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
    #20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
    #21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
    #24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
    #27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
    #28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
    #31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
    #32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
    #33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
    #34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
    #37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
    #38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
    #39 0x00000000004006fe in _start ()

Maybe you are looking for

  • What is the best way to manage my hard drive?

    Background - I have a 13" MacBook Pro with 250GB hard drive and recently I have had to delete or migrate files to external HDs to gain space. I spent last night doing just that. I also have two EHDs - a 2TB My Passport and a 3TB Seagate GoFlex Home W

  • How do I tell if my phone is 'locked' or 'unlocked' GSM?

    How do I tell if my phone is 'locked' or 'unlocked' GSM? Thanks!!

  • Error message when upgrading to the latest itunes

    i've been attempting to upgrade my old itunes to the latest one, as i have a new ipod which needs the latest progrm to run. it seems to download alright but when i click 'run' at the end of the install it gives the error message - invalid drive : F:/

  • Item & for schedule line & is in the work area

    Hi All, We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 0

  • How do I send attachments larger than 300 kB with Mail?

    When I installed OS 10.2 on my 333 MHz iMac last year, I switched all my e-mail usage over from Outlook Express to Mail. However, now I can't send or forward attachments any larger than about 300 kB. I've looked in System Preferences, and in Mail's P