[SOLVED] lags in gnome-shell since upgrade to 3.12

Hi,
I have many issues with gnome-shell 3.12, Especially in the overview mode. When I move to the desktop to the applications overview there are some lags.
I had no problems with gnome-shell 3.10.
Did you encounter the same problem?
Thank you
Last edited by Axinorm (2014-04-22 13:44:56)

I find a solution here : https://bugzilla.gnome.org/show_bug.cgi?id=728289

Similar Messages

[Solved] Nautilus bookmarks - Gnome Shell Doesn't Start

Hi there.
I've tried to search and have been scratching my head by what probably has a really simple solution but I have not found it so far.
I've made a fresh install of Arch, system is up to date, with Gnome 3 (shell and whatnot).
I've set my locale in /etc/rc.conf to pt_BR and have properly generated locales.
$ locale -a
C
en_US
en_US.iso88591
en_US.utf8
POSIX
pt_BR
pt_BR.iso88591
pt_BR.utf8
Gnome is localized to pt_BR
Everything is fine and dandy except for a really annoying thing.
xdg-user-dirs-update
Creates folders with incorrect characters when viewed on Nautilus (but appear correct on Nautilus sidebar).
I tried editing the .config/user-dirs.dirs file with gedit, it showed the wrong characters but allowed me to write the correct ones. Saved it and ran xdg-user-dis-update, the output is borked characters. Tried editing it in nano, same results.
I've managed to manually delete and create the correct folders using
xdg-user-dirs-update --set MUSIC /home/$USER/Foldername
but, while it displays properly on nautilus when navigating, it doesn't display properly on the sidebar.
I'm linking to a screenshot so it is easier to understand. The music folder should read "Músicas". You can see I'm inside the Videos folder but the sidebar name doesn't match the folder name.
http://i453.photobucket.com/albums/qq25 … _issue.jpg
Any ideas?
EDIT: After this post, I rebooted and gnome shell would no longer start - at all. I would get it to log in and display the wallpaper but that was it. I could get into xfce4 from gdm so I knew the issue was with gnome.
Nonetheless, I went ahead and did yet another reinstall (I always assume I borked a package or hard-to-find-configuration).
Feeling frustated but being a tad wiser I noticed a weird behavior on ~/.xsessionerror
[Error initializing libicu support]
This went on forever until I aborted the command.
Changing my locale on my rc.conf from pt_BR to en_US fixed gnome-shell. I was once again able to boot into it without a problem. I then, from within gnome, choose portuguese as the default locale (gnome-control-panel, not rc.conf). This fixed the Nautilus issue above and has not stopped gnome-shell from working. I don't know *how* they implement their localization but heck, it works.
Solved and maybe it might help anyone with the same issue.
Last edited by OttoRobba (2012-06-22 06:43:37)

Hmm, since yesterday I'm fumbling around with those settings too. It seems this is not settings related at all (at least not to old package settings), but rather to nautilus' behavior. Just a few minutes ago I've set "view all hidden files" to true in it's settings. It instantly crashed. After a reboot gnome-shell is gone. This is really annoying.
Also there is no taskbar, no menu bar, no nothing in fallback mode!... Is this even fallback mode?
Trying to launch gnome-shell from terminal then gives:
Window manager warning: Screen 0 on display ":0" already has a window manager; try using the --replace option to replace the current window manager.
with replace option:
Window manager warning: Log level 16: Another compositing manager is running on screen 0
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Segmentation fault
Compiz is gone already. What could be causing this issue?

[SOLVED] libcairo crashes gnome-shell

Hi,
I think after one of the updates (I don't run I am pasting hopefully useful logs:
.xsession-errors
/etc/gdm/Xsession: Beginning session setup...
localuser:janci being added to access control /etc/gdm/Xsession: Setup done, will execute: /usr/bin/startxfce4: X server already running xrdb: "URxvt.scrollstyle" on line xfce4-session-Message: ssh-agent is already *** buffer overflow detected ***: /usr/bin/trayfreq ======= Backtrace: =========
/lib/libc.so.6(__fortify_fail+0x37)[0x7f7ebb6167b7]
/lib/libc.so.6(+0xf6d59)[0x7f7ebb613d59]
/lib/libc.so.6(_IO_default_xsputn+0x89)[0x7f7ebb593239]
/usr/bin/trayfreq[0x401a91]
/lib/libc.so.6(__libc_start_main+0xf5)[0x7f7ebb53e455]
======= Memory map: ========
00400000-00405000 r-xp 00000000 08:06 161991 00605000-00606000 r--p 00005000 08:06 161991 00606000-00607000 rw-p 00006000 08:06 161991 00607000-00744000 rw-p 00000000 00:00 0
022e1000-0239f000 rw-p 00000000 00:00 0 7f7eb674c000-7f7eb6761000 r-xp 00000000 08:06 152581 7f7eb6761000-7f7eb6960000 ---p 00015000 08:06 152581 7f7eb6960000-7f7eb6961000 rw-p 00014000 08:06 152581 7f7eb6961000-7f7eb696a000 r-xp 00000000 08:06 393261 7f7eb696a000-7f7eb6b6a000 ---p 00009000 08:06 393261 7f7eb6b6a000-7f7eb6b6b000 r--p 00009000 08:06 393261 7f7eb6b6b000-7f7eb6b6c000 rw-p 0000a000 08:06 393261 7f7eb6b6c000-7f7eb6b9b000 r-xp 00000000 08:06 394594 7f7eb6b9b000-7f7eb6d9b000 ---p 0002f000 08:06 394594 7f7eb6d9b000-7f7eb6d9c000 r--p 0002f000 08:06 394594 7f7eb6d9c000-7f7eb6d9d000 rw-p 00030000 08:06 394594 7f7eb6d9d000-7f7eb6da6000 r-xp 00000000 08:06 155000 7f7eb6da6000-7f7eb6fa5000 ---p 00009000 08:06 155000 7f7eb6fa5000-7f7eb6fa6000 r--p 00008000 08:06 155000 7f7eb6fa6000-7f7eb6fa7000 rw-p 00009000 08:06 155000 7f7eb6fa7000-7f7eb6fb7000 r-xp 00000000 08:06 155046 7f7eb6fb7000-7f7eb71b6000 ---p 00010000 08:06 155046 7f7eb71b6000-7f7eb71b7000 r--p 0000f000 08:06 155046 7f7eb71b7000-7f7eb71b8000 rw-p 00010000 08:06 155046 7f7eb71b8000-7f7eb71be000 r-xp 00000000 08:06 163514 7f7eb71be000-7f7eb73bd000 ---p 00006000 08:06 163514 7f7eb73bd000-7f7eb73be000 rw-p 00005000 08:06 163514 7f7eb73be000-7f7eb73ea000 r-xp 00000000 08:06 150850 7f7eb73ea000-7f7eb75e9000 ---p 0002c000 08:06 150850 7f7eb75e9000-7f7eb75ea000 r--p 0002b000 08:06 150850 7f7eb75ea000-7f7eb75eb000 rw-p 0002c000 08:06 150850 7f7eb75eb000-7f7eb75f2000 r-xp 00000000 08:06 150852 7f7eb75f2000-7f7eb77f2000 ---p 00007000 08:06 150852 7f7eb77f2000-7f7eb77f3000 r--p 00007000 08:06 150852 7f7eb77f3000-7f7eb77f4000 rw-p 00008000 08:06 150852 7f7eb77f4000-7f7eb7804000 r-xp 00000000 08:06 161479 7f7eb7804000-7f7eb7a03000 ---p 00010000 08:06 161479 7f7eb7a03000-7f7eb7a04000 r--p 0000f000 08:06 161479 7f7eb7a04000-7f7eb7a05000 rw-p 00010000 08:06 161479 7f7eb7a05000-7f7eb7a09000 r-xp 00000000 08:06 161488 7f7eb7a09000-7f7eb7c08000 ---p 00004000 08:06 161488 7f7eb7c08000-7f7eb7c09000 r--p 00003000 08:06 161488 7f7eb7c09000-7f7eb7c0a000 rw-p 00004000 08:06 161488 7f7eb7c0a000-7f7eb7c0f000 r-xp 00000000 08:06 265843 7f7eb7c0f000-7f7eb7e0e000 ---p 00005000 08:06 265843 7f7eb7e0e000-7f7eb7e0f000 r--p 00004000 08:06 265843 7f7eb7e0f000-7f7eb7e10000 rw-p 00005000 08:06 265843 7f7eb7e10000-7f7eb7e1c000 r-xp 00000000 08:06 2490853 7f7eb7e1c000-7f7eb801b000 ---p 0000c000 08:06 2490853 7f7eb801b000-7f7eb801c000 r--p 0000b000 08:06 2490853 7f7eb801c000-7f7eb801d000 rw-p 0000c000 08:06 2490853 7f7eb801d000-7f7eb81e2000 r--p 00000000 08:06 145576 7f7eb81e2000-7f7eb81e7000 r-xp 00000000 08:06 141070 7f7eb81e7000-7f7eb83e6000 ---p 00005000 08:06 141070 7f7eb83e6000-7f7eb83e7000 r--p 00004000 08:06 141070 7f7eb83e7000-7f7eb83e8000 rw-p 00005000 08:06 141070 7f7eb83e8000-7f7eb83ea000 r-xp 00000000 08:06 141262 7f7eb83ea000-7f7eb85ea000 ---p 00002000 08:06 141262 7f7eb85ea000-7f7eb85eb000 r--p 00002000 08:06 141262 7f7eb85eb000-7f7eb85ec000 rw-p 00003000 08:06 141262 7f7eb85ec000-7f7eb8614000 r-xp 00000000 08:06 133916 7f7eb8614000-7f7eb8813000 ---p 00028000 08:06 133916 7f7eb8813000-7f7eb8815000 r--p 00027000 08:06 133916 7f7eb8815000-7f7eb8816000 rw-p 00029000 08:06 133916 7f7eb8816000-7f7eb8825000 r-xp 00000000 08:06 159377 7f7eb8825000-7f7eb8a24000 ---p 0000f000 08:06 159377 7f7eb8a24000-7f7eb8a26000 rw-p 0000e000 08:06 159377 7f7eb8a26000-7f7eb8a43000 r-xp 00000000 08:06 141345 7f7eb8a43000-7f7eb8c43000 ---p 0001d000 08:06 141345 7f7eb8c43000-7f7eb8c44000 rw-p 0001d000 08:06 141345 7f7eb8c44000-7f7eb8c4c000 r-xp 00000000 08:06 141391 7f7eb8c4c000-7f7eb8e4c000 ---p 00008000 08:06 141391 7f7eb8e4c000-7f7eb8e4d000 rw-p 00008000 08:06 141391 7f7eb8e4d000-7f7eb8e4f000 r-xp 00000000 08:06 141306 7f7eb8e4f000-7f7eb904e000 ---p 00002000 08:06 141306 7f7eb904e000-7f7eb904f000 rw-p 00001000 08:06 141306 7f7eb904f000-7f7eb90cf000 r-xp 00000000 08:06 141245 7f7eb90cf000-7f7eb92ce000 ---p 00080000 08:06 141245 7f7eb92ce000-7f7eb92d4000 rw-p 0007f000 08:06 141245 7f7eb92d4000-7f7eb9300000 r-xp 00000000 08:06 148781 7f7eb9300000-7f7eb94ff000 ---p 0002c000 08:06 148781 7f7eb94ff000-7f7eb9500000 r--p 0002b000 08:06 148781 7f7eb9500000-7f7eb9501000 rw-p 0002c000 08:06 148781 7f7eb9501000-7f7eb9514000 r-xp 00000000 08:06 2490894 7f7eb9514000-7f7eb9714000 ---p 00013000 08:06 2490894 7f7eb9714000-7f7eb9715000 r--p 00013000 08:06 2490894 7f7eb9715000-7f7eb9716000 rw-p 00014000 08:06 2490894 7f7eb9716000-7f7eb9718000 rw-p 00000000 00:00 7f7eb9718000-7f7eb972d000 r-xp 00000000 08:06 148383 7f7eb972d000-7f7eb992c000 ---p 00015000 08:06 148383 7f7eb992c000-7f7eb992d000 r--p 00014000 08:06 148383 7f7eb992d000-7f7eb992e000 rw-p 00015000 08:06 148383 7f7eb992e000-7f7eb9987000 r-xp 00000000 08:06 133624 7f7eb9987000-7f7eb9b86000 ---p 00059000 08:06 133624 7f7eb9b86000-7f7eb9b87000 r--p 00058000 08:06 133624 7f7eb9b87000-7f7eb9b88000 rw-p 00059000 08:06 133624 7f7eb9b88000-7f7eb9b8b000 r-xp 00000000 08:06 2490450 7f7eb9b8b000-7f7eb9d8a000 ---p 00003000 08:06 2490450 7f7eb9d8a000-7f7eb9d8b000 r--p 00002000 08:06 2490450 7f7eb9d8b000-7f7eb9d8c000 rw-p 00003000 08:06 2490450 7f7eb9d8c000-7f7eb9d93000 r-xp 00000000 08:06 148861 7f7eb9d93000-7f7eb9f92000 ---p 00007000 08:06 148861 7f7eb9f92000-7f7eb9f93000 r--p 00006000 08:06 148861 7f7eb9f93000-7f7eb9f94000 rw-p 00007000 08:06 148861 7f7eb9f94000-7f7eb9f96000 r-xp 00000000 08:06 144421 7f7eb9f96000-7f7eba195000 ---p 00002000 08:06 144421 7f7eba195000-7f7eba196000 r--p 00001000 08:06 144421 7f7eba196000-7f7eba197000 rw-p 00002000 08:06 144421 7f7eba197000-7f7eba199000 r-xp 00000000 08:06 144187 7f7eba199000-7f7eba398000 ---p 00002000 08:06 144187 7f7eba398000-7f7eba399000 r--p 00001000 08:06 144187 7f7eba399000-7f7eba39a000 rw-p 00002000 08:06 144187 7f7eba39a000-7f7eba3a3000 r-xp 00000000 08:06 145109 7f7eba3a3000-7f7eba5a2000 ---p 00009000 08:06 145109 7f7eba5a2000-7f7eba5a3000 r--p 00008000 08:06 145109 7f7eba5a3000-7f7eba5a4000 rw-p 00009000 08:06 145109 7f7eba5a4000-7f7eba5ac000 r-xp 00000000 08:06 145020 7f7eba5ac000-7f7eba7ab000 ---p 00008000 08:06 145020 7f7eba7ab000-7f7eba7ac000 r--p 00007000 08:06 145020 7f7eba7ac000-7f7eba7ad000 rw-p 00008000 08:06 145020 7f7eba7ad000-7f7eba7bb000 r-xp 00000000 08:06 144273 7f7eba7bb000-7f7eba9ba000 ---p 0000e000 08:06 144273 7f7eba9ba000-7f7eba9bb000 r--p 0000d000 08:06 144273 7f7eba9bb000-7f7eba9bc000 rw-p 0000e000 08:06 144273 7f7eba9bc000-7f7eba9be000 r-xp 00000000 08:06 144170 7f7eba9be000-7f7ebabbd000 ---p 00002000 08:06 144170 7f7ebabbd000-7f7ebabbe000 r--p 00001000 08:06 144170 7f7ebabbe000-7f7ebabbf000 rw-p 00002000 08:06 144170 7f7ebabbf000-7f7ebabc9000 r-xp 00000000 08:06 144393 7f7ebabc9000-7f7ebadc8000 ---p 0000a000 08:06 144393 7f7ebadc8000-7f7ebadc9000 r--p 00009000 08:06 144393 7f7ebadc9000-7f7ebadca000 rw-p 0000a000 08:06 144393 7f7ebadca000-7f7ebaddc000 r-xp 00000000 08:06 144157 7f7ebaddc000-7f7ebafdb000 ---p 00012000 08:06 144157 7f7ebafdb000-7f7ebafdc000 r--p 00011000 08:06 144157 7f7ebafdc000-7f7ebafdd000 rw-p 00012000 08:06 144157 7f7ebafdd000-7f7ebafe2000 r-xp 00000000 08:06 144178 7f7ebafe2000-7f7ebb1e2000 ---p 00005000 08:06 144178 7f7ebb1e2000-7f7ebb1e3000 r--p 00005000 08:06 144178 7f7ebb1e3000-7f7ebb1e4000 rw-p 00006000 08:06 144178 7f7ebb1e4000-7f7ebb317000 r-xp 00000000 08:06 142258 7f7ebb317000-7f7ebb517000 ---p 00133000 08:06 142258 7f7ebb517000-7f7ebb518000 r--p 00133000 08:06 142258 7f7ebb518000-7f7ebb51d000 rw-p 00134000 08:06 142258 7f7ebb51d000-7f7ebb6b4000 r-xp 00000000 08:06 2490847 7f7ebb6b4000-7f7ebb8b4000 ---p 00197000 08:06 2490847 7f7ebb8b4000-7f7ebb8b8000 r--p 00197000 08:06 2490847 7f7ebb8b8000-7f7ebb8ba000 rw-p 0019b000 08:06 2490847 7f7ebb8ba000-7f7ebb8be000 rw-p 00000000 00:00 7f7ebb8be000-7f7ebb8d5000 r-xp 00000000 08:06 2490386 7f7ebb8d5000-7f7ebbad4000 ---p 00017000 08:06 2490386 7f7ebbad4000-7f7ebbad5000 r--p 00016000 08:06 2490386 7f7ebbad5000-7f7ebbad6000 rw-p 00017000 08:06 2490386 7f7ebbad6000-7f7ebbada000 rw-p 00000000 00:00 7f7ebbada000-7f7ebbbcd000 r-xp 00000000 08:06 2490482 7f7ebbbcd000-7f7ebbdcd000 ---p 000f3000 08:06 2490482 7f7ebbdcd000-7f7ebbdce000 r--p 000f3000 08:06 2490482 7f7ebbdce000-7f7ebbdcf000 rw-p 000f4000 08:06 2490482 7f7ebbdcf000-7f7ebbec1000 r-xp 00000000 08:06 133686 7f7ebbec1000-7f7ebc0c0000 ---p 000f2000 08:06 133686 7f7ebc0c0000-7f7ebc0c1000 r--p 000f1000 08:06 133686 7f7ebc0c1000-7f7ebc0c2000 rw-p 000f2000 08:06 133686 7f7ebc0c2000-7f7ebc0c3000 rw-p 00000000 00:00 7f7ebc0c3000-7f7ebc0ca000 r-xp 00000000 08:06 2490393 7f7ebc0ca000-7f7ebc2c9000 ---p 00007000 08:06 2490393 7f7ebc2c9000-7f7ebc2ca000 r--p 00006000 08:06 2490393 7f7ebc2ca000-7f7ebc2cb000 rw-p 00007000 08:06 2490393 7f7ebc2cb000-7f7ebc2cc000 r-xp 00000000 08:06 133688 7f7ebc2cc000-7f7ebc4cb000 ---p 00001000 08:06 133688 7f7ebc4cb000-7f7ebc4cc000 r--p 00000000 08:06 133688 7f7ebc4cc000-7f7ebc4cd000 rw-p 00001000 08:06 133688 7f7ebc4cd000-7f7ebc4d0000 r-xp 00000000 08:06 133687 7f7ebc4d0000-7f7ebc6cf000 ---p 00003000 08:06 133687 7f7ebc6cf000-7f7ebc6d0000 r--p 00002000 08:06 133687 7f7ebc6d0000-7f7ebc6d1000 rw-p 00003000 08:06 133687 7f7ebc6d1000-7f7ebc71d000 r-xp 00000000 08:06 133712 7f7ebc71d000-7f7ebc91d000 ---p 0004c000 08:06 133712 7f7ebc91d000-7f7ebc91e000 r--p 0004c000 08:06 133712 7f7ebc91e000-7f7ebc91f000 rw-p 0004d000 08:06 133712 7f7ebc91f000-7f7ebc953000 r-xp 00000000 08:06 143306 7f7ebc953000-7f7ebcb53000 ---p 00034000 08:06 143306 7f7ebcb53000-7f7ebcb54000 r--p 00034000 08:06 143306 7f7ebcb54000-7f7ebcb55000 rw-p 00035000 08:06 143306 7f7ebcb55000-7f7ebcbee000 r-xp 00000000 08:06 154063 7f7ebcbee000-7f7ebcded000 ---p 00099000
** (process:2611): WARNING **: Trying to register ** (process:2611): WARNING **: Trying to register ** (process:2611): WARNING **: Trying to register 08:06 154063 /usr/lib/libfreetype.so.6.8.1
Initialization of gnome-clock failed.
Trying next provider...
Latitude and longitude must be set.
** (nm-applet:2639): WARNING **: Could not ** Message: applet now removed from the notification ** (nm-applet:2639): WARNING **: fetch_connections_done: ** (nm-applet:2639): WARNING **: Failed to ** Message: applet now embedded in the notification ** Message: applet now removed from the notification ** Message: Starting applet secret agent because ** (nm-applet:2639): WARNING **: Failed to urxvt: unable to parse color 'S_base02', using urxvt: unable to parse color 'S_red', using urxvt: unable to parse color 'S_green', using urxvt: unable to parse color 'S_yellow', using urxvt: unable to parse color 'S_blue', using urxvt: unable to parse color 'S_magenta', using urxvt: unable to parse color 'S_cyan', using urxvt: unable to parse color 'S_base2', using urxvt: unable to parse color 'S_base03', using urxvt: unable to parse color 'S_orange', using urxvt: unable to parse color 'S_base01', using urxvt: unable to parse color 'S_base00', using urxvt: unable to parse color 'S_base0', using urxvt: unable to parse color 'S_violet', using urxvt: unable to parse color 'S_base1', using urxvt: unable to parse color 'S_base3xterm*foreground: urxvt: unable to parse color 'S_base1', using urxvt: unable to parse color 'S_base03', using (xfrun4:2689): GLib-GObject-CRITICAL **: g_object_unref: (xfrun4:2689): GLib-GObject-CRITICAL **: g_object_unref: (xfrun4:2689): Gtk-CRITICAL **: IA__gtk_tree_model_row_changed: (polkit-gnome-authentication-agent-1:2634): (bluetooth-applet:2642): Gdk-WARNING **: bluetooth-applet: blueman-applet: Fatal IO error 11 (Resource wicd-client.py: Fatal IO error 11 (Resource Loading configuration plugins
blueman-applet version 1.23 starting
Stale PID, overwriting
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Has notifications support True
Loading...
Connecting to daemon...
Connected.
Exception during notification: GDBus.Error:org.freed displaytray True
Done loading.
(nm-applet:2639): Gdk-WARNING **: nm-applet: g_dbus_connection_real_closed: Remote peer urxvt: X connection to ':0.0' broken, unable (gedit:2725): GLib-CRITICAL **: g_main_loop_quit: g_dbus_connection_real_closed: Remote peer part of dmesg
[ 6112.822665] xfrun4[6956]: segfault at 1f [ 6133.893574] gnome-shell-cal[7799] trap int3 [ 6154.808689] pool[7845]: segfault at 1c ip [ 6155.396639] gnome-shell-cal[7884] trap int3 [ 6175.790936] pool[7899]: segfault at 1c ip part of everything.log
Jun 7 03:14:32 localhost kernel: [ 6175.790936] Jun 7 03:14:32 localhost gnome-session[7712]: Jun 7 03:14:32 localhost gnome-session[7712]: pacman -Qm
acpitool 0.5.1-5
arduino 1:1.0-2
batterymon 1.2.0-8
blogofile 0.7.1-3
chipmunk-radio 0.1.9-2
djvu2pdf 0.9.1-1
dropbox 1.2.48-1
dvdbackup 0.4.1-3
faenza-icon-theme 1.1-1
fbxkb 0.6-1
fife-svn 3811-1
gcc-gcj-ecj 4.5-1
gdm3setup 20120607-1
gen-init-cpio 2.6.32-1
gnome-shell-extension-user-theme 3.2.3-1
gnuplot-py 1.8-3
google-talkplugin 2.8.5.0-1
gtk-rezlooks-engine 0.6-10
gtk2-theme-dust 0.5.0-2
gtk2-theme-dyne 0.2-2
gtk2-theme-fawn 0.3-1
guvcview 1.5.3-1
hal 0.5.14-6
hal-info 0.20091130-1
hibernate-script 2.0-6
ipe 7.1.1-2
jdownloader latest-14.2
lib32-curl 7.23.1-1
lib32-libxxf86dga 1.1.2-1
lib32-nspr 4.8.9-1
lib32-nss 3.12.11-1
libdrm-git 20120427-1
libfetch 2.33-3
libflashsupport-pulse 20120307-1
libgdu 3.0.2-2
linux-mainline 3.3rc7-1
ntrack 1:16-2
obshutdown 0.1_rc1-1
picasa 3.0_5744.02-6
pybik 0.4-2
python-gtkglext 1.1.0-4
python-sympy-git 20120424-1
python-textile 2.1.5-1
python-uncertainties 1.8-1
python2-pygtkhelpers-hg 279-1
python2-pylast 0.5.11-1
screenruler 1.1-2
shell-fm-git 20120518-1
tango-icon-theme 0.8.90-4
tcp_wrappers 7.6-11
texmaker 3.2.2-1
tlp 0.3.3-1
trayfreq 0.2.x.dev2-1
unknown-horizons-git 20111115-1
wicd-eduroam 1-1
xarchiver 0.5.2-5
Mix of xfce and gnome messages may by caused EDIT:
I just wanted to note that issue went away, Marking as solved.
Last edited by Jamp (2012-06-09 23:16:25) on testing), gnome-shell would crash after few seconds of use. Examining error messages, it seems to be related to libcairo segfault, which I was unable to analyze further. I did some googling on this, but most issues were concerning ATI of nVidia card and/or multiple monitor, from which I use none.
list
/usr/bin/ssh-agent -- startxfce4
on display :0
96 overrides entry on line 90
running; starting gpg-agent without ssh support
terminated
/> /> /> /> /> /> /usr/bin/trayfreq
/usr/bin/trayfreq
/usr/bin/trayfreq
[heap]
/usr/lib/libgcc_s.so.1
/usr/lib/libgcc_s.so.1
/usr/lib/libgcc_s.so.1
/usr/lib/gtk-2.0/2.10.0/engines/libpixmap.so
/usr/lib/gtk-2.0/2.10.0/engines/libpixmap.so
/usr/lib/gtk-2.0/2.10.0/engines/libpixmap.so
/usr/lib/gtk-2.0/2.10.0/engines/libpixmap.so
/usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so
/usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so
/usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so
/usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so
/usr/lib/libltdl.so.7.3.0
/usr/lib/libltdl.so.7.3.0
/usr/lib/libltdl.so.7.3.0
/usr/lib/libltdl.so.7.3.0
/usr/lib/libtdb.so.1.2.9
/usr/lib/libtdb.so.1.2.9
/usr/lib/libtdb.so.1.2.9
/usr/lib/libtdb.so.1.2.9
/usr/lib/libogg.so.0.8.0
/usr/lib/libogg.so.0.8.0
/usr/lib/libogg.so.0.8.0
/usr/lib/libvorbis.so.0.4.6
/usr/lib/libvorbis.so.0.4.6
/usr/lib/libvorbis.so.0.4.6
/usr/lib/libvorbis.so.0.4.6
/usr/lib/libvorbisfile.so.3.3.5
/usr/lib/libvorbisfile.so.3.3.5
/usr/lib/libvorbisfile.so.3.3.5
/usr/lib/libvorbisfile.so.3.3.5
/usr/lib/libcanberra.so.0.2.5
/usr/lib/libcanberra.so.0.2.5
/usr/lib/libcanberra.so.0.2.5
/usr/lib/libcanberra.so.0.2.5
/usr/lib/libcanberra-gtk.so.0.1.8
/usr/lib/libcanberra-gtk.so.0.1.8
/usr/lib/libcanberra-gtk.so.0.1.8
/usr/lib/libcanberra-gtk.so.0.1.8
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/lib/libnss_files-2.15.so
/lib/libnss_files-2.15.so
/lib/libnss_files-2.15.so
/lib/libnss_files-2.15.so
/usr/lib/locale/locale-archive
/usr/lib/libXdmcp.so.6.0.0
/usr/lib/libXdmcp.so.6.0.0
/usr/lib/libXdmcp.so.6.0.0
/usr/lib/libXdmcp.so.6.0.0
/usr/lib/libXau.so.6.0.0
/usr/lib/libXau.so.6.0.0
/usr/lib/libXau.so.6.0.0
/usr/lib/libXau.so.6.0.0
/usr/lib/libexpat.so.1.6.0
/usr/lib/libexpat.so.1.6.0
/usr/lib/libexpat.so.1.6.0
/usr/lib/libexpat.so.1.6.0
/usr/lib/libbz2.so.1.0.6
/usr/lib/libbz2.so.1.0.6
/usr/lib/libbz2.so.1.0.6
/usr/lib/libxcb.so.1.1.0
/usr/lib/libxcb.so.1.1.0
/usr/lib/libxcb.so.1.1.0
/usr/lib/libxcb-render.so.0.0.0
/usr/lib/libxcb-render.so.0.0.0
/usr/lib/libxcb-render.so.0.0.0
/usr/lib/libxcb-shm.so.0.0.0
/usr/lib/libxcb-shm.so.0.0.0
/usr/lib/libxcb-shm.so.0.0.0
/usr/lib/libpixman-1.so.0.26.0
/usr/lib/libpixman-1.so.0.26.0
/usr/lib/libpixman-1.so.0.26.0
/usr/lib/libpng15.so.15.10.0
/usr/lib/libpng15.so.15.10.0
/usr/lib/libpng15.so.15.10.0
/usr/lib/libpng15.so.15.10.0
/lib/libresolv-2.15.so
/lib/libresolv-2.15.so
/lib/libresolv-2.15.so
/lib/libresolv-2.15.so
0
/usr/lib/libz.so.1.2.7
/usr/lib/libz.so.1.2.7
/usr/lib/libz.so.1.2.7
/usr/lib/libz.so.1.2.7
/usr/lib/libpcre.so.1.0.0
/usr/lib/libpcre.so.1.0.0
/usr/lib/libpcre.so.1.0.0
/usr/lib/libpcre.so.1.0.0
/lib/libdl-2.15.so
/lib/libdl-2.15.so
/lib/libdl-2.15.so
/lib/libdl-2.15.so
/usr/lib/libffi.so.6.0.0
/usr/lib/libffi.so.6.0.0
/usr/lib/libffi.so.6.0.0
/usr/lib/libffi.so.6.0.0
/usr/lib/libXdamage.so.1.1.0
/usr/lib/libXdamage.so.1.1.0
/usr/lib/libXdamage.so.1.1.0
/usr/lib/libXdamage.so.1.1.0
/usr/lib/libXcomposite.so.1.0.0
/usr/lib/libXcomposite.so.1.0.0
/usr/lib/libXcomposite.so.1.0.0
/usr/lib/libXcomposite.so.1.0.0
/usr/lib/libXcursor.so.1.0.2
/usr/lib/libXcursor.so.1.0.2
/usr/lib/libXcursor.so.1.0.2
/usr/lib/libXcursor.so.1.0.2
/usr/lib/libXrandr.so.2.2.0
/usr/lib/libXrandr.so.2.2.0
/usr/lib/libXrandr.so.2.2.0
/usr/lib/libXrandr.so.2.2.0
/usr/lib/libXi.so.6.1.0
/usr/lib/libXi.so.6.1.0
/usr/lib/libXi.so.6.1.0
/usr/lib/libXi.so.6.1.0
/usr/lib/libXinerama.so.1.0.0
/usr/lib/libXinerama.so.1.0.0
/usr/lib/libXinerama.so.1.0.0
/usr/lib/libXinerama.so.1.0.0
/usr/lib/libXrender.so.1.3.0
/usr/lib/libXrender.so.1.3.0
/usr/lib/libXrender.so.1.3.0
/usr/lib/libXrender.so.1.3.0
/usr/lib/libXext.so.6.4.0
/usr/lib/libXext.so.6.4.0
/usr/lib/libXext.so.6.4.0
/usr/lib/libXext.so.6.4.0
/usr/lib/libXfixes.so.3.1.0
/usr/lib/libXfixes.so.3.1.0
/usr/lib/libXfixes.so.3.1.0
/usr/lib/libXfixes.so.3.1.0
/usr/lib/libX11.so.6.3.0
/usr/lib/libX11.so.6.3.0
/usr/lib/libX11.so.6.3.0
/usr/lib/libX11.so.6.3.0
/lib/libc-2.15.so
/lib/libc-2.15.so
/lib/libc-2.15.so
/lib/libc-2.15.so
0
/lib/libpthread-2.15.so
/lib/libpthread-2.15.so
/lib/libpthread-2.15.so
/lib/libpthread-2.15.so
0
/lib/libm-2.15.so
/lib/libm-2.15.so
/lib/libm-2.15.so
/lib/libm-2.15.so
/usr/lib/libglib-2.0.so.0.3200.3
/usr/lib/libglib-2.0.so.0.3200.3
/usr/lib/libglib-2.0.so.0.3200.3
/usr/lib/libglib-2.0.so.0.3200.3
0
/lib/librt-2.15.so
/lib/librt-2.15.so
/lib/librt-2.15.so
/lib/librt-2.15.so
/usr/lib/libgthread-2.0.so.0.3200.3
/usr/lib/libgthread-2.0.so.0.3200.3
/usr/lib/libgthread-2.0.so.0.3200.3
/usr/lib/libgthread-2.0.so.0.3200.3
/usr/lib/libgmodule-2.0.so.0.3200.3
/usr/lib/libgmodule-2.0.so.0.3200.3
/usr/lib/libgmodule-2.0.so.0.3200.3
/usr/lib/libgmodule-2.0.so.0.3200.3
/usr/lib/libgobject-2.0.so.0.3200.3
/usr/lib/libgobject-2.0.so.0.3200.3
/usr/lib/libgobject-2.0.so.0.3200.3
/usr/lib/libgobject-2.0.so.0.3200.3
/usr/lib/libfontconfig.so.1.4.4
/usr/lib/libfontconfig.so.1.4.4
/usr/lib/libfontconfig.so.1.4.4
/usr/lib/libfontconfig.so.1.4.4
/usr/lib/libfreetype.so.6.8.1
gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
/> /usr/lib/libfreetype.so.6.8.1
/usr/lib/libfreetype.so.6.8.1
/usr/lib/libpango-1.0.so.0.3000.0
/usr/lib/libpango-1.0.so.0.3000.0
/usr/lib/libpango-1.0.so.0.3000.0
/usr/lib/libpango-1.0.so.0.3000.0
/usr/lib/libcairo.so.2.11200.2
/usr/lib/libcairo.so.2.11200.2
/usr/lib/libcairo.so.2.11200.2
0
/usr/lib/libgdk_pixbuf-2.0.so.0.2600.1
/usr/lib/libgdk_pixbuf-2.0.so.0.2600.1
/usr/lib/libgdk_pixbuf-2.0.so.0.2600.1
/usr/lib/libgdk_pixbuf-2.0.so.0.2600.1
/usr/lib/libpangocairo-1.0.so.0.3000.0
/usr/lib/libpangocairo-1.0.so.0.3000.0
/usr/lib/libpangocairo-1.0.so.0.3000.0
/usr/lib/libpangocairo-1.0.so.0.3000.0
/usr/lib/libpangoft2-1.0.so.0.3000.0
/usr/lib/libpangoft2-1.0.so.0.3000.0
/usr/lib/libpangoft2-1.0.so.0.3000.0
/usr/lib/libpangoft2-1.0.so.0.3000.0
/usr/lib/libgio-2.0.so.0.3200.3
/usr/lib/libgio-2.0.so.0.3200.3
/usr/lib/libgio-2.0.so.0.3200.3
/usr/lib/libgio-2.0.so.0.3200.3
0
/usr/lib/libatk-1.0.so.0.20409.1
/usr/lib/libatk-1.0.so.0.20409.1
/usr/lib/libatk-1.0.so.0.20409.1
/usr/lib/libatk-1.0.so.0.20409.1
/usr/lib/libgdk-x11-2.0.so.0.2400.10
/usr/lib/libgdk-x11-2.0.so.0.2400.10
/usr/lib/libgdk-x11-2.0.so.0.2400.10
/usr/lib/libgdk-x11-2.0.so.0.2400.10
/usr/lib/libgtk-x11-2.0.so.0.2400.10
/usr/lib/libgtk-x11-2.0.so.0.2400.10
/usr/lib/libgtk-x11-2.0.so.0.2400.10
/usr/lib/libgtk-x11-2.0.so.0.2400.10
0
/lib/ld-2.15.so
0
0
/lib/ld-2.15.so
/lib/ld-2.15.so
0
[stack]
[vdso]
[vsyscall]
gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
area
error fetching connections: (25) Launch helper exited with unknown return code 1.
register as an agent: (25) Launch helper exited with unknown return code 1
area
area
GNOME Shell disappeared
register as an agent: (25) Launch helper exited with unknown return code 1
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
pink instead.
#FFFFFF', using pink instead.
pink instead.
pink instead.
assertion `G_IS_OBJECT (object)' failed
assertion `G_IS_OBJECT (object)' failed
assertion `GTK_IS_TREE_MODEL (tree_model)' failed
Gdk-WARNING **: polkit-gnome-authentication-agent-1: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
temporarily unavailable) on X server :0.0.
temporarily unavailable) on X server :0.0.
esktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files
Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
to recover, exiting.
assertion `g_atomic_int_get (&loop->ref_count) > 0' failed
vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
ip 000000000040ab30 sp 00007fff704890a0 error 4 in xfce4-appfinder[400000+1a000]
ip:7fe9c10115e1 sp:7fffa7690820 error:0
00007f53e71b5c7c sp 00007f53bcfebed0 error 4 in libcairo.so.2.11200.2[7f53e714b000+f0000]
ip:7f04260655e1 sp:7fff930bca90 error:0
00007fd5e8ebec7c sp 00007fd5bef11ed0 error 4 in libcairo.so.2.11200.2[7fd5e8e54000+f0000]
pool[7899]: segfault at 1c ip 00007fd5e8ebec7c sp 00007fd5bef11ed0 error 4 in libcairo.so.2.11200.2[7fd5e8e54000+f0000]
WARNING: Application 'gnome-shell.desktop' killed by signal 11
WARNING: App 'gnome-shell.desktop' respawning too quickly
by the fact that I use xfce4 as a substitute for now.
thanks to IMO libcairo update. It however, got me to configure openbox setup to usable state

# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT="default8x16"
CONSOLEMAP=
LOCALE=
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=TLap
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng crond dbus networkmanager)
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost TLap
::1 localhost.localdomain localhost
# End of file
GDM is set to run through /etc/inittab btw and runs fine, I just want gnome-shell back without this annoyance and I don't really understand what I did.

[Solved] Bluetooth in gnome-shell not functioning

Hello everyone and thank you for reading this topic,
I'm trying to get bluetooth working on my laptop, My setup is a acer aspire v3 laptop (containing BT-4)running archlinux wth gnome-shell
packages that matter (at least i think):
[pascal@Skynet:~]$ pacman -Q | grep blue
bluez 5.21-2
bluez-firmware 1.2-8
gnome-bluetooth 3.12.0-1
Result (this is everything no animations/eye-candy, its frozen in this state):
So I'm doing something wrong. I expect my phone to show up (named "tricorder" for alll the trekkies here )
My googling resulted in many people saying that gnome-bluetooth doesnt work with bluez5. But I havent seen a workaround.
Thanks again!
Last edited by Lacsapix (2014-08-12 18:51:44)

Might be a stupid question, but have you activated the bluetooth systemd service? Without that, you won't be able to use bluetooth.
EDIT: See the wiki for more information.
Last edited by runical (2014-08-12 18:39:47)

[solved] Minor issues (gnome-shell crash and keyboard backlight)

Hi,
I have two very small questions that are probably quite stupid but I just don't know what to enter into google to resolve these issues. I hope you forgive me if I just list those and hope that you can give me some pointers.
1. When I close the lid on my Dell XPS 13 and open it again gnome-shell crashes. When I press the power button my laptop goes into some kind of sleep state as well but without crashing gnome-shell in the process. So the question is: how can I make the former action behave like the latter?
2. I'd like to disable the keyboard backlight. Where would I do that?
Any hints, pointers or quick solutions would be appreciated.
Last edited by dkgi (2012-08-06 17:07:20)

1. You can change what happens after you close the lid using a menu in the 'gnome-tweak-tool'.
pacman -Syu gnome-tweak-tool
Find out what kind of sleep state is causing the problem by calling the commands from a terminal.
Read this wiki-page to find the commands.
Also read the troubleshooting part of the page.
2. It is possible to get information about the state of your devices in the '/sys/devices/' virtual filesystem.
For example the light on my thinkpad can be read from '/sys/devices/platform/thinkpad_acpi/leds/tpacpi::thinklight'
Try to find something similar for the keyboard backlight and find out where to write for changing it.
Sorry, no quick solution here ;-)

[SOLVED] External sound output silent since upgrade to GNOME 3.16

Hi.
I just upgraded my machine to GNOME 3.16 (pacman log). Since then, sound output (whether the GNOME Sound applet test, or Clementine, or YouTube from Firefox)...
... works fine when outputting to the laptop speakers.
... is silent when I plug my external speakers to the computer's jack 3.5" out. I have two outputs, am using the same as before the upgrade but tried both nevertheless, and plugging an mp3 player works.
Here is my config:
laptop = Dell XPS 1645
uname -a = Linux x 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64 GNU/Linux
pulseaudio = pulseaudio 6.0-1
Any idea? Debug suggestions? Need more info? Thanks for the help.
EDIT: Problem solved after a second reboot :-/
Last edited by ronjouch (2015-04-10 09:56:41)

LeCrayonVert wrote:Removed both options...still the same thing.
I've tried to reinstall kernel26-lts...and even with this kernel, the same error occurs...It's most likely related to the mkinitcpio creation process.
Did you try the fallback initramfs?

[SOLVED] Openbox's obconf issue since upgrade

Good Afternoon Arch Community,
I use LXDE on top of openbox. since the upgrade, my obconf is throwing up the error:
Failed to load an rc.xml....
pacman was wanting to upgrade obconf but was complaining about the -git version. I assumed that the new openbox needed the newer obconf. I used
sudo pacman -Sf obconf
and allowed pacman to do it's thing.
Same error as pre-obconf upgrade.
Current version in the repos as of this writing is:
obconf-2.0.3.git20100309-1
I looked in the bugs under "obconf" and found no entries.
Then I went into the "~/.config/openbox" directory and nuked the contents, then recopied the /etc/xdg/openbox files files my home directory where they should be (as per the wiki), and then started "X".
I also verified proper permissions on the files in "~/.config.openbox".
Same error.
LXDE is still running, but of course my right click options for openbox are now gone as it's not liking something about the files. So my system is not "down" per-se. I've just lost some functionality.
Can someone please tell me what I'm doing wrong?
Sincerely and respectfully,
Dave
Last edited by dcbdbis (2011-08-26 17:46:54)

Hello bernarcher,
rc.xml already exists in "~/.config/openbox". So I mv'd it to another name, created the symlink and tried again. Same error.
Then I removed the symlink and restored the original file.
Sorry it didn't work, but thank you for the post.....
For the record, here is the contents of my "/.config/openbox" directory:
[dcbdbis@Curly-Sr openbox]$ ls
total 76
drwxrwxrwx 2 dcbdbis users 4096 Aug 17 13:15 .
drwxr-xr-x 25 dcbdbis users 4096 Aug 15 17:43 ..
-rwxrwxrwx 1 dcbdbis users 466 Aug 16 18:44 autostart
-rwxrwxrwx 1 dcbdbis users 379 Aug 16 18:44 environment
-rw-rw-rw- 1 dcbdbis users 23296 Aug 3 20:34 lxde-rc.xml
-rw-rw-rw- 1 dcbdbis users 9617 Aug 16 18:44 menu.xml
-rw-rw-rw- 1 dcbdbis users 23147 Aug 16 18:44 rc.xml
[dcbdbis@Curly-Sr openbox]$
Dave

[Solved] Gnome-shell text turned to rectangles after botched upgrade

Hi all,
I've run into a problem that I just can't solve, so I was wondering if somebody with a lot of expertise could help out. My system has a couple of stability issues; it freezes up every few days, and I have to make a hard reboot (I think it's related to the video card, but I haven't had the funds to go get a better one yet). The last time it froze was during a pacman upgrade, and I had to reboot. At the new boot, after logging in, all of the gnome-shell letters turned to rectangles (see screenshot), and I had a bunch of other errors. I ran another upgrade Sync with pacman and rebooted; that took care of the errors, but the font problems still remained. The interesting thing is that the gdm window has no problems, I can see the icons on the top right just fine, and the date renders perfectly. It's only when I log in when the blocks occur, and they only occur on gnome-shell panel text (and on everything under Activities).
I have a 32-bit system that's fully migrated to systemd with open source radeon drivers. Here's some output of journalctl for the current boot, with stuff unrelated to the gnome-shell display removed (e.g. NetworkManager, UFW, etc). However, I didn't find any new errors compared to logs from before the upgrade.
-- Logs begin at Mon, 2012-09-10 23:14:10 PDT, end at Tue, 2012-09-11 18:52:58 PDT. --
Nov 17 12:26:09 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:10 Whitcomb dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:11 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:11 Whitcomb polkitd[315]: Started polkitd version 0.107
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /etc/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /usr/share/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb polkitd[315]: Finished loading, compiling and executing 2 rules
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb polkitd[315]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Nov 17 12:26:15 Whitcomb systemd[1]: Started Manage, Install and Generate Color Profiles.
Nov 17 12:26:15 Whitcomb systemd[1]: Started Authorization Manager.
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRB]
Nov 17 12:26:15 Whitcomb kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Nov 17 12:26:15 Whitcomb kernel: ACPI: Sleep Button [SLPB]
Nov 17 12:26:15 Whitcomb kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRF]
Nov 17 12:26:15 Whitcomb kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
Nov 17 12:26:15 Whitcomb kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 17 12:26:15 Whitcomb kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU0 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Nov 17 12:26:15 Whitcomb kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Nov 17 12:26:15 Whitcomb kernel: agpgart: Detected VIA VT3314 chipset
Nov 17 12:26:15 Whitcomb kernel: agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Nov 17 12:26:15 Whitcomb kernel: psmouse serio1: hgpk: ID: 10 00 64
Nov 17 12:26:15 Whitcomb kernel: ppdev: user-space parallel port driver
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU1 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Nov 17 12:26:15 Whitcomb kernel: cfg80211: Calling CRDA to update world regulatory domain
Nov 17 12:26:15 Whitcomb kernel: via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
Nov 17 12:26:15 Whitcomb kernel: via_rhine: Broken BIOS detected, avoid_D3 enabled
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1cc00, 00:19:db:6a:70:49, IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c1e1
Nov 17 12:26:15 Whitcomb kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
Nov 17 12:26:15 Whitcomb kernel: ath5k 0000:00:07.0: registered as 'phy0'
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM regdomain: 0x10
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM indicates we should expect a direct regpair map
Nov 17 12:26:15 Whitcomb kernel: ath: Country alpha2 being used: CO
Nov 17 12:26:15 Whitcomb kernel: ath: Regpair used: 0x10
Nov 17 12:26:15 Whitcomb kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: RF2112B 2GHz radio found (0x46)
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Nov 17 12:26:15 Whitcomb kernel: snd_via82xx 0000:00:11.5: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: Adding 3903788k swap on /dev/sda2. Priority:-1 extents:1 across:3903788k
Nov 17 12:26:15 Whitcomb kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 17 12:26:15 Whitcomb kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event4 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event2 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event3 (Sleep Button)
Nov 17 12:26:16 Whitcomb systemd[1]: PID file /run/deluge/deluged.pid not readable (yet?) after start.
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb systemd[1]: Started Network Manager.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Reached target Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network Time Service...
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Mount Samba Shares...
Nov 17 12:26:16 Whitcomb systemd[1]: Started Mount Samba Shares.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Deluge Daemon.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Network Time Service.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 17 12:26:17 Whitcomb systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 17 12:26:17 Whitcomb systemd[1]: Startup finished in 4s 827ms 48us (kernel) + 20s 199ms 872us (userspace) = 25s 26ms 920us.
Nov 17 12:26:19 Whitcomb kernel: fuse init (API version 7.20)
Nov 17 12:26:19 Whitcomb systemd[1]: Mounting FUSE Control File System...
Nov 17 12:26:19 Whitcomb systemd[1]: Mounted FUSE Control File System.
Nov 17 12:26:19 Whitcomb gdm-simple-slave[311]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Nov 17 12:26:19 Whitcomb kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Accounts Service...
Nov 17 12:26:20 Whitcomb accounts-daemon[371]: started daemon version 0.6.25
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb systemd[1]: Started Accounts Service.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Console Manager...
Nov 17 12:26:21 Whitcomb console-kit-daemon[376]: missing action
Nov 17 12:26:21 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb systemd[1]: Started Console Manager.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: New session 1 of user gdm.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb systemd[1]: Starting Daemon for power management...
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb systemd[1]: Started Daemon for power management.
Nov 17 12:26:27 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:27 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully called chroot.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully dropped privileges.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully limited resources.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Canary thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Watchdog thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully made thread 523 of process 523 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Supervising 1 threads of 1 processes of 1 users.
Nov 17 12:26:28 Whitcomb pulseaudio[523]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:19:db:6a:70:49:00:18:74:eb:98:00:08:00 SRC=158.181.47.4 DST=131.215.169.100 LEN=129 TOS=0x00 PREC=0x00 TTL=108 ID=9372 PROTO=UDP SPT=6881 DPT=50753 LEN=109
Nov 17 12:26:27 Whitcomb systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Nov 17 12:26:28 Whitcomb systemd[1]: Started RealtimeKit Scheduling Policy Service.
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 17 12:26:34 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb systemd[1]: Starting Disk Manager...
Nov 17 12:26:34 Whitcomb udisksd[566]: udisks daemon version 2.0.0 starting
Nov 17 12:26:35 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb systemd[1]: Started Disk Manager.
Nov 17 12:26:35 Whitcomb udisksd[566]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 17 12:26:37 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:1 (system bus name :1.37 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Nov 17 12:26:37 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:26:37 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:06 Whitcomb systemd[1]: Starting File System Check on /dev/sdb1...
Nov 17 12:27:07 Whitcomb systemd-fsck[582]: /dev/sdb1: clean, 157018/24420352 files, 88519245/97677200 blocks
Nov 17 12:27:07 Whitcomb systemd[1]: Started File System Check on /dev/sdb1.
Nov 17 12:27:07 Whitcomb systemd[1]: Mounting /home...
Nov 17 12:27:07 Whitcomb systemd[1]: Mounted /home.
Nov 17 12:27:07 Whitcomb kernel: EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_unix(gdm-password:session): session opened for user gregory by (unknown)(uid=0)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_ck_connector(gdm-password:session): nox11 mode, ignoring PAM_TTY :0
Nov 17 12:27:13 Whitcomb systemd-logind[229]: New session 2 of user gregory.
Nov 17 12:27:13 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/1001/X11-display.
Nov 17 12:27:13 Whitcomb gnome-session[443]: WARNING: Detected that screensaver has left the bus
Nov 17 12:27:13 Whitcomb gnome-session[443]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Nov 17 12:27:13 Whitcomb polkitd[315]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Nov 17 12:27:13 Whitcomb gdm-simple-slave[311]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Successfully made thread 666 of process 666 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Supervising 4 threads of 2 processes of 2 users.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:17 Whitcomb gnome-session[603]: Gtk-WARNING: Failed to parse /home/gregory/.config/gtk-3.0/settings.ini: Key file does not have group 'Settings'
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "gnome-do" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "JRSST" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "tasque" (No such file or directory)
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Successfully made thread 705 of process 705 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Supervising 5 threads of 3 processes of 2 users.
Nov 17 12:27:19 Whitcomb pulseaudio[705]: [pulseaudio] pid.c: Daemon already running.
Nov 17 12:27:26 Whitcomb goa[766]: goa-daemon version 3.6.2 starting [main.c:112, main()]
Nov 17 12:27:26 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb gnome-keyring-daemon[601]: keyring alias directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:27 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.utf8)
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:33 Whitcomb systemd-logind[229]: Removed session 1.
I tried using gnome-tweak tool to fiddle around with the fonts, but that didn't help, none of the fonts would render correctly. Cantarell, which I'm assuming is the gnome-shell font, is still in /etc/fonts/conf.avail, so I don't think that the font file itself went missing. I made the fontconfig update a while ago, and that didn't cause any problems.
I also heard that there were problems with xorg-server, so I downgraded xorg-server, pixman, and cairo to their previous versions, but that didn't help either. EDIT: I've also done a pacman -Syyf gnome-shell to try and reinstall gnome-shell. That also didn't work.
I've run out of things to try. If someone else was more familiar with the workings of gnome-shell fonts, or had a better idea of how to debug, I'd really appreciate it. Thank you.
UPDATE: I found that /etc/fonts/conf.avail/31-cantarell.conf existed, but was empty. After doing a pacman -Syyf cantarell-fonts, they went right back to normal!
Last edited by cactaur (2012-11-20 00:21:27)

Problem disappeared.
I'm not sure, but i think installing xf86-video-modesetting helped to fix this issue.
I had an error messages in /var/log/Xorg.0.log like this:
(EE) Failed to load module "modesetting" (module does not exist, 0)

Latest nvidia drive upgrade crashes gnome-shell

Hi,
After latest nvidia upgrade:
[2015-04-22 22:25] [PACMAN] Running 'pacman -Syu'
[2015-04-22 22:25] [PACMAN] synchronizing package lists
[2015-04-22 22:25] [PACMAN] starting full system upgrade
[2015-04-22 22:26] [ALPM] transaction started
[2015-04-22 22:26] [ALPM] upgraded lib32-nvidia-utils (346.59-1 -> 349.16-1)
[2015-04-22 22:26] [ALPM] upgraded lib32-nvidia-libgl (346.59-1 -> 349.16-1)
[2015-04-22 22:26] [ALPM] upgraded libinput (0.13.0-2 -> 0.14.1-1)
[2015-04-22 22:26] [ALPM] upgraded man-pages (3.82-1 -> 3.83-1)
[2015-04-22 22:26] [ALPM] upgraded nvidia-libgl (346.59-1 -> 349.16-1)
[2015-04-22 22:26] [ALPM] upgraded nvidia-utils (346.59-1 -> 349.16-1)
[2015-04-22 22:26] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2015-04-22 22:26] [ALPM] upgraded nvidia (346.59-1 -> 349.16-1)
[2015-04-22 22:27] [ALPM] transaction completed
[2015-04-23 08:17] [PACMAN] Running 'pacman -Syu'
[2015-04-23 08:17] [PACMAN] synchronizing package lists
[2015-04-23 08:17] [PACMAN] starting full system upgrade
[2015-04-23 08:17] [ALPM] transaction started
[2015-04-23 08:17] [ALPM] upgraded git (2.3.5-1 -> 2.3.6-1)
[2015-04-23 08:17] [ALPM] transaction completed
[2015-04-23 08:31] [PACMAN] Running 'pacman -U lib32-nvidia-utils-346.59-1-x86_64.pkg.tar.xz lib32-nvidia-libgl-346.59-1-x86_64.pkg.tar.xz nvidia-346.59-1-x86_64.pkg.tar.xz nvidia-libgl-346.59-1-x86_64.pkg.tar.xz nvidia-utils-346.59-1-x86_64.pkg.tar.xz'
[2015-04-23 08:31] [ALPM] transaction started
[2015-04-23 08:31] [ALPM] downgraded lib32-nvidia-utils (349.16-1 -> 346.59-1)
[2015-04-23 08:31] [ALPM] downgraded lib32-nvidia-libgl (349.16-1 -> 346.59-1)
[2015-04-23 08:31] [ALPM] downgraded nvidia-libgl (349.16-1 -> 346.59-1)
[2015-04-23 08:31] [ALPM] downgraded nvidia-utils (349.16-1 -> 346.59-1)
[2015-04-23 08:31] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2015-04-23 08:31] [ALPM] downgraded nvidia (349.16-1 -> 346.59-1)
[2015-04-23 08:31] [ALPM] transaction completed
[root@desktop log]#
gnome-shell does not start anymore, downgrading nvidia fixes the problem. Anyone encountered the same problem? If yes, is there another fix?
Thank you!

Hi,
found the fix in other topics:
https://bbs.archlinux.org/viewtopic.php … 6#p1522996
https://bbs.archlinux.org/viewtopic.php?id=196499
Updating the intel-ucode solved the issue for me. (extra/nvidia 349.16-1)

Gnome shell lags with open source radeon driver

Greetings.
I own a radeon 5870m and have been having some issues with gnome for a long time that are bugging the crap out of me.
I never seemed to obtain a smooth gnome experience, specially desktop effects and some 2d operations like resize are noticeably dragging sometimes.
Since kernel 3.11 and dpm i decided to test a bit with other distro's, and to my surprise, running live images of ubuntu 13.10 or fedora 20 beta give me an almost perfect and all around smooth experience in gnome.
I assume they are using by default EXA acceleration, though I can't possibly explain it, because for me the default configuration (no custom xorg conf file) with EXA is even slower and laggier than catalyst drivers in gnome. Switching to glamor gives me some improvement, but in some desktop effects, it still feels a bit laggy. DPM is switched on.
is it possible the other distro's are shipping some Gnome tweaks?
Im running kernel 3.12 with xf86-video-ati 1:7.2.0-1 and mesa 9.2 but this issue i have had for the past one year or so. I have direct rendering and most stuff do work fine, but there are noticeable lags in many places which are very annoying.
Im not sure which logs to provide, hope someone has some clues. Many thanks

I have the same issue with the a 7670m (which is a re-branded 6650m) but have never figured out what the issue is beyond just asuming driver issues. I am running an oddball laptop, a Sony Vaio Z, that runs the 7670m as an external card over light peak however performance in Windows was fine though so I don't think lightpeak is the issue. In gnome shell the pressing the super key in activities view is very sluggish and makes switching between applications quite painful compared to running on the built-in Intel HD 4000 GPU. I too have tried glamor and didn't find it made much difference. The performance of 3D games is atrocious on the AMD card compared to Intel, on glmark2 the internal HD 4000 gives a score of 2200 whereas the AMD card gives around 1000 so a big difference.
When I was running Ubuntu, running the latest version of Mesa (labelled 9.3 back then, 10 now) did make a difference in performance so I'm looking forward to the production release at the end of the month and hopefully it will help some. Mesa 10 got the glmark2 up to a score of 1200 so still; way behind the Intel card.

[SOLVED] Unable to load Gnome Shell 3.0

Hi all,
Did a search and didnt find anything on this. I really like gnome3 while testing it on an ubuntu machine and I think with time it would be great. So I said to myself I wonder how great it would be with a nice clean arch install.
I created a fresh install and followed the directions here.....
https://wiki.archlinux.org/index.php/GNOME_3
I keep getting package not found errors in pacman though.
I uncommented the testing repo as instructed above
#testing uncommented
[testing]
Include = /etc/pacman.d/mirrorlist
no dice
pacman -Syu testing/gnome gives me a package not found error.
I thought ok maybe my mirriorlist is too old so I updated my mirrors to the latest....no dice. testing/gnome not found
So I said ok maybe I can just upgrade. I went through the normal gnome 2 install procedure and have a working gnome wm environment. So as instructed above I tried to do the upgrade.
pacman -S gnome-shell.....no dice. gnome-shell not found.
pacman -Syu always shows testing repo update first so I know thats correct.
The same thing happened to me when kde 4.6 came out. I was unable to load it from the repository. 4.5 kept loading no matter what I did.
This is only my second question on these forums and I have been using arch for 2 years so be gentle ;-) I always try to rtfm first. Then forum search.
I would just try it out in suse but suse is just sooo fat. Folks in the forums there tend to slam a guy for asking an honest question quite a lot too. ( not me but while trying to load broadcom-wl I had to do several searches and wow....) Plus I hate thier package mangement.
Thanks in advance for any advice offered,
Shakz
Last edited by Shakz (2011-04-14 02:34:58)

Inxsible wrote:
on topic though : have you enabled testing and community-testing both?
If you are on 64 bit and are using multilib, then make sure you enable multilib-testing as well. Also make sure that the order of the repos is very important. testing must be before core and extra.
Also what mirrors have you used. Try the kernel.org and see if it helps.
Ah ok thanks for the response. I am using 64bit (sry for not mentioning that) Ill try to enable multilib-testing when I get home.
For repos I have all US repos uncommented as I use powerpill. I only comment out a few that always give connectivity errors.
Testing is uncommented above core and extra.
Appreciate it Inxsible!

[SOLVED] Gnome Shell 3.4.1: Unable to prevent dynamic workspaces

I am trying to turn off dynamic workspaces and set a permanent number (6) as is supposedly possible since 3.4.
Using dconf, I turn the following setting to 'false':
/org/gnome/shell/overrides/dynamic-workspaces
and enter '6' in to the following setting:
/org/gnome/desktop/wm/preferences/num-workspaces
The '6' is then immediately changed back to however many workspaces the 'dynamic' setting has created at the moment.
Bizarrely, 'overriding' effect does not occur if I change the number when 'dynamic-workspaces' is set to true. Whenever it is set to false, Gnome changes the 'num-workspaces' setting to reflect current realities.
Regardless of settings, the way it works is still 'dynamic' [grumble]worst.use.of.that.word.ever....[/grumble]
Is this a bug? Or am I just not getting it right?
(As a side note, the frippery static extension thing is currently uninstallable)
EDIT: If I try to set the number of workspaces far above what the current number is, I can see the number going down one-by-one. This would seem to indicate that the window manager is killing them off one after the other, as they aren't occupied. In other words, it's not that the new value is rejected out of hand. It's just that the WM still works dynamically.
Last edited by madchine (2012-06-15 12:57:35)

[root@swanepoel ~]# pacman -Qi gnome-shell
Name : gnome-shell
Version : 3.4.1-3
URL : http://live.gnome.org/GnomeShell
Licenses : GPL2
Groups : gnome
Provides : None
Depends On : caribou folks gcr gjs gnome-bluetooth gnome-desktop
gnome-menus libcroco libpulse mutter nautilus
networkmanager telepathy-logger telepathy-mission-control
unzip
Optional Deps : network-manager-applet: shell integration for networkmanager
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 6044.00 KiB
Packager : Ionut Biru <[email protected]>
Architecture : x86_64
Build Date : Fri May 4 18:19:35 2012
Install Date : Tue Jun 12 16:18:48 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : The next generation GNOME Shell
see the man page for dconf for resetting. I 'm sure you can find it.

[SOLVED] GNOME Shell 3.4 : Volume Control Missing

Hi all, I have an Acer netbook with Arch Linux i686. I installed GNOME-Shell 3.4, but there is no volume control applet. When playing music, i can't control the volume. Can you help me?
(Sorry for my bad English)
Last edited by masnormen (2012-06-05 04:44:14)

Thanks, the problem is solved now. Volume Applet shown after update.

[solved] Blank screen for few seconds between GDM and Gnome-Shell

Hi there,
I don't know if this phenomenon is "normal" or not, so I ask : I am using Gnome 3.6 and after I have logged in on GDM I see a blank screen for roundabout 3 seconds before the gnome-shell starts. The whole system is running fine - so this is no "real" problem -, but this 3 seconds of a black screen between GDM and the gnome-shell are somewhat annoying and I want to find out if this behaviour is normal or not .
Indeed, if I look into journalctl, I find this messages:
Dez 03 21:45:53 sushi gdm-simple-slave[272]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:46:03 sushi gnome-session[311]: WARNING: Detected that screensaver has left the bus
Dez 03 21:46:03 sushi gnome-session[311]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Child process -311 was already dead.
Dez 03 22:00:50 sushi systemd-tmpfiles[1793]: stat(/run/user/1000/gvfs) failed: Permission denied
Actually, I don't know if this is relevant for my little "black-screen" problem (but it looks as if ...).
And
$ systemctl status gdm.service
shows nothing to worry about (as far as I can see):
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Mo, 2012-12-03 21:45:51 CET; 40min ago
Main PID: 266 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─266 /usr/sbin/gdm-binary
├─272 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─279 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-xTnD7p/database -seat seat0 -nolisten tcp vt1
└─440 gdm-session-worker [pam/gdm-password]
The hardware is an Asrock H77M-ITX board with an Intel GPU. Systemd is up and running well, no failing service units.
Any ideas, what's going on here?
Last edited by swordfish (2012-12-08 14:26:00)

Finally I found out what's going on - and it's so simple
It's just my monitor which is runing on a default resolution of 1920x1080. When I switched to 1600x900 using Gnome's system tools, the monitor needs roundabout two seconds to adjust to this resolution

Gnome-Shell in Gnome 3.2 not working after upgrade

Hi guys,
after upgrading from Pacman, Gnome-Shell does not start up correctly. After login the Gnome-Keyring pops up (as usual) and after entering my password Gnome-Shell crashes ("oops.. something went wrong bla bla").
I could resolve this problem by deinstalling Empathy.
So basically I just wanted to inform others who may experience the same problem. Anyone knows why Empathy does not work correctly?

I don't have this problem, but I have issues with Empathy's new clutter-based call UI not coming up. May be the problem is with clutter??

[SOLVED] lags in gnome-shell since upgrade to 3.12

Similar Messages

Maybe you are looking for