[Solved]Laptop does not start (not even bios)

Hi all,
I was about to install archlinux on my laptop. When I generate partitions (I used GPT), I saw something like this:
"If you have a BIOS motherboard (or plan on booting in BIOS compatibility mode) and you want to setup GRUB on a GPT-partitioned drive, you will need to create an extra BIOS Boot Partition of size 1 or 2 MiB and EF02 type code. Syslinux does not need one."
So, I was planning to make this. When I run cgdisk, I was that lthere was a 1007kb unusued(?) space. So I thought I can use this space for boot sector. Then I changed its type to EF02. When I did this, my laptop shutted down quickly and does not start again. When I press the power up button; I hear the usual starting noise, and then it shuts down again.
What did I do to my laptop?
What I tried:
Remove battery, wait for 5 minutes, try again
Remove hdd, try again
Unplug&plug bios battery, try again
Edit: Solved with a shame. Wall-charger was unplugged. This topic can be removed.
Last edited by firatakandere (2013-12-24 17:09:56)

firatakandere wrote:Wall-charger was unplugged. This topic can be removed.
Why? Others may learn for your experience
Welcome to Arch Linux.

Similar Messages

Firefox does not start (not even safemode) but uses CPU

I have the latest Firefox 25.0 (and latest Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. This started not too long ago.
At first when I start Firefox nothing appears no matter how often I restart. However, in the process list I see firefox.exe at 25% CPU, 2x FlashPlayerPlugin_11_9_900_117.exe (0% CPU) and plugincontainer.exe. No matter how often I kill all of them, Firefox wouldn't restart.
The following does also not help in this situation:
* Starting in normal Safemode: Firefox opens up a Window but freezes immediately and does not respond. The process list shows the the same processes even though I find FlashPlayer unexpected.
* Disable plugincontainer: Same results (just without plugincontainer.exe)
* Deinstall Flash: Same results (just without FlashPlayerPlugin)
The following can start Firefox once only:
* Starting in Safemode but select "Reset Firefox": Firefox won't start right away, though. Nothing happens and you have to kill the processes. However the very next time you start Firefox the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the Windows process list despite not Tab being open). Unfortunately, after closing Firefox the processes (Firefox, FlashPlayerPlugin) are not removed. I kill them and the trouble with Firefox not starting reappears again.

I'm afraid not. As soon as I reset, Firefox disappears however two new FlashPlayerPlugin.exe processes start. Those together with firefox.exe remain as background processes and above cycle is the same.
There is one difference between resetting in safemode-startup (Shift clicking while startup and chosing "Reset") and resetting from the Troubleshooting menu: Only the former allows for a subsequent single normal start (after killing the first attempt as described above).
PS: My extensions did not get lost. Does that mean the "Reset" actually crashed? Also I'm using Sync.
PPS: I've tried disabling all Plugins (Flash etc.). Now when I close Firefox, FlashPlayerPlugin does not remain as a process, however firefox.exe does at 25% CPU. And when I try to restart Firefox, I again get two FlashPlayerPlugin processes with all the above symptoms (Plugins remain disabled in the configuration). This plugin is probably not the cause as I also tried deinstalling it, but it may give an indication where Firefox gets stuck.

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

The new version i download will not start or even open the window when clicking on the icon

just will not start, tried using the Run progarm and still noting tired removing the firefox program and downloading again same issue

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
 <Author>MYDOMAIN\SERVER1</Author>
 <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
 <CalendarTrigger id="Trigger 1">
 <StartBoundary>2014-07-14T21:00:00</StartBoundary>
 <Enabled>true</Enabled>
 <ScheduleByDay>
 <DaysInterval>1</DaysInterval>
 </ScheduleByDay>
 </CalendarTrigger>
</Triggers>
<Principals>
 <Principal id="Author">
 <UserId>S-1-5-18</UserId>
 <RunLevel>HighestAvailable</RunLevel>
 </Principal>
</Principals>
<Settings>
 <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
 <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
 <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
 <AllowHardTerminate>true</AllowHardTerminate>
 <StartWhenAvailable>true</StartWhenAvailable>
 <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
 <IdleSettings>
 <StopOnIdleEnd>false</StopOnIdleEnd>
 <RestartOnIdle>false</RestartOnIdle>
 </IdleSettings>
 <AllowStartOnDemand>true</AllowStartOnDemand>
 <Enabled>true</Enabled>
 <Hidden>false</Hidden>
 <RunOnlyIfIdle>false</RunOnlyIfIdle>
 <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
 <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
 <WakeToRun>false</WakeToRun>
 <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
 <Priority>7</Priority>
</Settings>
<Actions Context="Author">
 <Exec>
 <Command>%windir%\System32\wbadmin.exe</Command>
 <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
 </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

80gb Classic iPod is dying on me (Not Starting, Not Recognised...etc)

Hi
I have an 80gb classic iPod and I am having major trouble with it.
It started with the iPod showing the Apple logo screen for a long time then a multilingual message saying I need to "Restore using iTunes" I have no problem with restoring, yet once I connect it to my Macbook Pro it is not recognised, not even in Disk Utility nor the USB list (from System Profiler). Now it doesn't even show the "Restore Using iTunes" message and just gets frozen on the Apple logo.
It does however charge, I attempted the whole resetting thing but to no avail.
Interestingly, the iPod automatically switches to 'Disk Mode' when I keep it connected to the computer, with the blinking "Do Not Disconnect" in old school screen. So I hurry to check with Disk Utility, NOTHING.
So basically nor iTunes or the computer recognise it, and I want to restore it but it's being non responsive and I could seriously use some help trying something on my own before the trip to the shiny Apple Dealer here.
Thanks in Advance.

Well, here are a few other suggestions:
try a different cable - one of the pins on your cable may be damaged
try connecting to a different computer
try connecting it to a different USB port on your computer
try connecting it through a powered USB hub
If none of these work, the only other suggestion would be to bring it (or send it) somewhere for diagnosis and repair. There are a few sites here in the States that offer this service, and I'm sure there is something available in the UK as well. They tend to be less expensive than asking Apple to service an iPod.
I am not a Mac person (Windows for me), so I cannot give you any tips on attacking the problem from that side of things.

Encore 1.5 Transcoding could not start not enough disk space

Dear all,
I have a relative new raid 0 with four Hitachi (HDS721075KLA330) disks. At the moment I've got 2794.54 GB capacity (quite enough) and 1825.83 GB of free space. When finishing a Encore 1.5 project for making a DVD folder there is the error message: "Transcoding could not start there is not enough disk space available. 0 is available on E:\, 237.55 is required. Please free up disk space." Also messages during saving: "No disk space".
The weird thing is I've hadn't had this error before using the same raid disks, but since a few days I am stuck.
My OS is Windows CP Professional (SP2), 2 GB RAM, Radeon X1650 video card, Matrox RT.X100 video editing card. Thanks for your help.
Hans Hermans

If I remember correctly, this is a bug caused by the sheer size of your target array. In the olden days when 1.5 was the released version, Terabyte drives were uncommon, and the package could not actually see it as this large, and will throw this error.
The workaround was to partition the target array into smaller sizes (less than 1 Terabyte) and you should be able to return back to normal.

FireFox will not start, I even uninstalled it and reinstalled and cannot get it to open. When I click on the icon it seems like something is about to happen and then nothing does. No processes activate it Windows Task Manager either.

See question.

'''Open a second window (not a second tab, that is different) when Firefox is already running and displayed on the monitor'''
*Firefox button > New Tab > New Window
*CTRL+N
*'''''If using the Menu Bar''''': File > New Window
**To '''''temporarily''''' display and make choices from the Menu Bar press the ALT key or the F10 key
**Also see: https://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing
'''Firefox "hang on exit"'''
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

HT1476 I have tried to charge the phone via computer and main socket it does not start up even after sometime and remains unable to start up any ideas ?

Unable to charge I phone 4s remains dead , can I get a new battery installed ?

Yes still nothing, it was showing 50% then crashed out for no reason. Now nothing

[solved] Laptop HDMI to *TV* not working

Update:
I was about to post regarding have problems connecting my new Dell Laptop to my TV but I've managed to solve the issue by using a different HDMI cable!
Why the original HDMI cable works with my old laptop but not the new one and why Dell support didn't suggest this as a fix I have no idea, nevermind!
I'll leave my original post below in case anyone has the same problems and finds this helpful!
The situation:
I just bought a new Dell Laptop (Inspiron 15" 7548 / Windows 8) to replace my ~5 year old Dell Inspiron (Windows 7).
The problem:
Trying to connect the new laptop to the TV (Panasonic) via HDMI doesn't work. The old laptop, on the other hand, detects the TV as soon as I plug in the HDMI cable and automatically mirrors the display.
Troubleshooting:
Initially, the new laptop doesn't even recognise the TV has been plugged in. I can get it to correctly recognise (in Control Panel\Appearance and Personalization\Display\Screen Resolution) that a Panasonic TV is connected by disabling & re-enabling the Intel HD 5500 graphics driver in `device manager`.
Unfortunately this doesn't help, the TV screen still remains black.
I have tried updating all the drivers (AMD/Intel) via the preinstalled Dell Update Manager software, the Dell website, Windows Update & Device Manager updates.
They all tell me everything is up to date.
I tried changing the mode from mirror to extend.
I tried changing the resolution (everything in the list from 1920x1080 - 1280x720 all at 50Hz).
Connecting the new laptop to a monitor via HDMI does work!
I emailed Dell Support for help but their response was "Update the drivers? That didn't work? Then it must be incompatible", which wasn't exactly helpful!

I have a second generation HDMI adapter. I have been using that for many months quite happily on my iPad 3 - watching all the content I purchased on iTunes and also YouTube and BBC iPlayer.
I upgraded to iOS6, and the HDMI adapter doesn't work any more - it says on screen that the output is being shown on the TV but there is no output.
I get the same problem with my VGA adapter as well.
These are the types of issue that I got fed up with grappling with on Windows that led me to Apple in the first place.
This is basic testing that hasn't been done.

Firefox will not start up even after I uninstalled and reinstalled.

I even did a system restore to back before the problem started in case it was a OS problem. I did notice a firfox safemode file in system startup which was not the location I installed to. There are icons on my desktop and start menu. I recently switched to Panda Secuity so I uninstalled that and switched back to System Mechanic [used for several years, worked fine with Firefox] to see if it made a difference, it did not. Any help or suggestions greatly apprciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618)

One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]]. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
~~~~~~~~~~~
If that does not solve the problem, [http://support.mozilla.com/en-US/kb/Managing+profiles#Creating_a_profile create a new profile] Then, Recover your data from the old profile. See http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile'

"Profile is missing or corrupted." Will not start again even with fresh install.

Apparently after some kind of crash, whenever I start Firefox I receive an error message saying "Profile is missing or corrupted. Cannot be loaded" or something like that. The information about loading the Profile Manager does no good, since it presumes you can already start Firefox. It is not even allowing me to create a new profile, and downloading a new version of Firefox does not work either.

Hello tomreedtoon,
try to delete the [http://kb.mozillazine.org/Profiles.ini_file profiles.ini] file to force firefox to create a new profile, the profiles.ini file exist in firefox profile folder '''path'''
for your windows use "Start > Run" (or press "Windows key+R" to open the Run box) and type :
%APPDATA%\Mozilla\Firefox
and click "OK" to quickly open the appropriate folder
when the new profile created (after you delete the profiles.ini folder) then see:
[https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#os=win7&browser=fx22 Recovering important data from an old profile]
[http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox]
thank you

FCP will not start not even a splash screen

I updated my 15" MacBook Pro to OSX 10.6.6 and now none of my Final Cut Pro projects will launch there is not even a splash screen that pops up. When I right click the FCP icon in the dock the only option it gives is to force quit. Has anyone heard of this happening in relation to an OS update?

Okay. I finally got FCS 2 apps and the App Store to coexist, but not without considerable trial and error. There is definitely some bad blood between 10.6.6 and FCS 2 apps. I haven't been able to pinpoint the exact problem since the behavior I experienced with FCP and Compressor was very inconsistent, but I do have some solutions that might work. I don't guarantee they'll all work as they did for me, but it's worth a shot.
1) Try launching FCP and waiting as long as you can when it hangs. Several times, if I waited long enough, the splash screen would magically appear and everything would start up as normal, even after a full minute or so.
2) Delete the Final Cut Pro System ID file and re-enter your serial number after launching FCP. Make sure you have your serial number handy before you try this. The System ID file is located in ~/Library/Application Support/ProApps/. Deleting this file allowed the serial dialogue to come up, and after entering the serial, FCP launched successfully.
3) If you have the time and patience, I highly recommend a totally clean install of 10.6 Snow Leopard and using the 10.6.6 Combo Update to get up to date. I managed to get a working Final Cut Pro and Compressor using this method, even though it was a pain in the ***. Using the Migration Assistant to transfer your files over will not break FCS2 apps. As a precaution, I did not transfer over any of my System Settings with the Migration Assistant. You can find the 10.6.6 Combo update here: http://support.apple.com/kb/DL1349
From my tests, I think there is some problem in 10.6.6 with how OS X displays custom dialogue boxes, such as the kind that drop down from the menu-bar or FCS's custom dialogue boxes and splash screens. I get hangs in MAS when it tries to display the Apple ID login and FCS upon launching. The behavior is inconsistent, sometimes hanging for 30 seconds, other times indefinitely, and I don't have the technical expertise to understand why. However, I've ruled out a disk error through a clean bill of health from disk utils and running the same OS config from two different hard drives.
Here's what I did:
1. Verified internal hard drive and made a SuperDuper backup of my internal hard drive to an external drive.
2. Wiped internal hard drive, installed 10.6 Snow Leopard, and installed Final Cut Studio from disks.
3. Installed the 10.6.5 combo update. Used Software Update to get all software up to date, but unchecked the 10.6.6 update.
Tested FCP: hang on startup.
4. Deleted the System ID file.
Tested FCP: asked for serial number, then completed launch.
Tested FCP again: launched with no problem.
Tested Compressor: launched with no problem.
5. I wanted to test the System ID fix on my old setup. I booted to SuperDuper backup (10.6.6 from Software Update) and deleted the System ID file.
Tested FCP: hang on startup.
6. Booted to clean-install (now at 10.6.5) and applied the 10.6.6 combo update.
Tested FCP: hang on startup
7. Deleted the System ID file.
Tested FCP: asked for serial number, then completed launch.
Tested FCP: initially hung on startup. However, after about 30 seconds, it surprisingly launched with no issues.
Tested FCP: took about 30 seconds to launch (no hang), but eventually displayed splash and launched with no issues.
Tested Compressor: same as above.
8. Migrated data from SuperDuper backup to 10.6.6 clean-install on internal drive using Migration Assistant. Excluded "Settings." I also deleted the System ID before testing.
Tested FCP: asked for serial number, then completed launch.
Tested Compressor: launched with no problems.
Tested FCP: launched with no problems.
9. I then launched the freshly installed Mac App Store. I clicked "install" for Evernote, and the app hung. However, after a moment, it displayed the Apple ID login drop-down from the menu bar. I entered my credentials and Evernote installed.
Tested FCP: initially hung on startup, then launched without a problem.
Tested FCP: launched without a problem.
Tested Compressor: launched without a problem
10. I decided to try one last little test. I deleted Evernote and launched both the Mac App Store and FCP at the same time. FCP hung on startup. I clicked "install" for Evernote again, and App Store hung. After a moment, though, FCP completed its launch AND the App Store drop-down asking me for my Apple ID appeared at the same time. This interested me, since it seemed to suggest that these were related incidents.
I have some process samples from activity monitor for when FCP hung, if someone would find them useful, but I can't read them at all. Console showed the following whenever FCP hung:
objc[192]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:18:36 PM [0x0-0x15015].com.apple.FinalCutPro[192]
objc[192]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:18:37 PM [0x0-0x15015].com.apple.FinalCutPro[192]
objc[202]: Class MIOTimecodeField is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeFieldTextView is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeFieldFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeSearchFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]

After updating Firefox to 3.6.14 it will not start, not even in safe mode after rebooting. Task Manager shows no Firefox running. I tried uninstalling Firefox & then reinstalling it. Stll won't start.

I get only an error message: " XULRunner-
Error: Platform version 1.9.2.13 is not compatible with minVersion >=1.9.2.14
maxVersion<=1.9.2.14 "
My system: Windows XP
I've tried the tips on the Firefox help pages.

I withdraw my 'I have this problem too'. My error was different, but a restart fixed whatever it was.

[SOLVED] KDE will not start, not sure if I set it up correctly

I installed ArchLinux today and I've been looking through the Wiki to get things setup.
In the Desktop Enviornment page it says to install the Xorg server first before installing an enviornment, so I installed xorg-server with: pacman -S xorg-server
I edited /etc/rc.conf to include 'dbus' in the Daemon array
I installed KDE with: pacman -S kde
I edited /etc/inittab to comment out:
#id:3:initdefault:
#x:5:respawn:/usr/bin/xdm -nodaemon
and uncomment:
id:5:initdefault:
x:5:respawn:/usr/bin/kdm -nodaemon
as it said to on the KDE page.
Then I restarted and used 'root' as login and all I saw was the terminal.
I'm not sure if I missed anything (I read through the KDE, Desktop Environment, Xorg, and DisplayManager pages) or if I just did something wrong.
Any help would be appreciated, thank you!
Last edited by harsha (2012-08-04 00:51:26)

First, you shouldn't try to login to X as root. Login as your user.
Also, I'd suggest following the beginners guide through testing TWM to make sure you've installed X correctly before you try to get KDE running.
After you've made it through those two steps (or if either fails), come back with the error messages or output you get in the attempt.

[Solved]Laptop does not start (not even bios)

Similar Messages

Maybe you are looking for