[SOLVED] Laptop screen blank (black)

Hey there
I left my laptop (dell vostro 1520) for about half an hour running on my desk. After coming back, the screen was black and could not be turned on again. The screen is still black after several reboots. I cannot even see the bios loading screen at the very beginning. One could think now that my screen is broken... but when the udev hook is triggered on boot, the screen flashes up for about 1 second. The same happens when I change the screen resolution. My external screen is still working, although the resolution is messed up after each reboot.
Any advice on this?
Last edited by dito (2012-05-10 08:18:11)

Try this:  Take a flashlight (torch?) and illuminate the screen at an angle to the screen and see if you can see any picture on the display where it is illuminated.  You may need to move your head and/or the light to eliminate glare.  If you can see a picture, you have a failed backlight.  If your display uses CCFL tubes (as opposed to LEDS) then I would bet a beer you have a bad inverter. 
Take a look and let us know.  If you can see something, you might try hooking up an external monitor and using the light to allow you to see well enough to get to the point where you can enable the external display.

Similar Messages

  • [SOLVED] Connecting extra Monitor, laptop screen goes black.

    Whenever i connect a additional monitor through HDMI (my only output), the laptop screen goes black. If i do FN + external_monitor switch, then the laptop screen turns on but the external monitor turns off.
    If you move the mouse you can feel that the desktop has been extended as i wanted, it is just that one of the screens keeps going black. The gnome display settings show both screens as active, the menu is so minimalistic that there is not much to do.
    system
    [cristobal@orion ~]$ uname -a
    Linux orion 3.11.4-1-razer #1 SMP PREEMPT Tue Oct 8 12:31:50 CLST 2013 x86_64 GNU/Linux
    As a side note, the custom kernel is almost identical to the original archlinux one, just that USB 3.0 module is disabled.
    some packages
    [cristobal@orion ~]$ pacman -Q nvidia-dkms bumblebee bbswitch-dkms nvidia-utils gnome-desktop
    nvidia-dkms 325.15-2
    bumblebee 3.2.1-3
    bbswitch-dkms 0.7-1
    nvidia-utils 325.15-1
    gnome-desktop 1:3.10.0-1
    Any ideas?
    Last edited by labotsirc (2013-10-15 18:33:18)

    The problem is now fixed,
    For some weird reason, this time the gnome settings did work. Must have been some sort of rare bug that now i cannot reproduce.
    Last edited by labotsirc (2013-10-15 18:32:53)

  • My laptop screen goes black when i plug in an Hdmi cord

    Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks

    I have pretty much the same exact problem and setup as DaveA1.  I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal.  It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
    Here's the specs on my laptop:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
    So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers.  I am curious to find out if Dave was able to find a solution to his problem.

  • Laptop screen goes black when HDMI connected to TV

    I have a Thinkpad Edge 431. I've set it up in Control Panel to duplicate both the laptop and the external monitor when connected by HDMI. It works fine.
    When I connect it to my TV, the laptop screen black. The TV displays "No Signal" until the HDMI connection is made. When the laptop screen goes black, so does the TV screen. No sound or picture.
    This was working fine until recently, and I can't figure out if I somehow changed settings to make this happen. It's clear that to me that the HDMI port on the laptop works, as does the cable.
    The TV port works (I've switched the connection on the cable box to each HDMI port on the TV, to make sure they work).
    I can't change anything in Control Panel when I connect the HDMI, because the screen is black.
    I've updated the Lenovo system.
    The other relevant piece of info: the Intel Graphics Card control panel says that Monitor/TV Settings are not supported (although until recently, I could easily display the computer on the TV).
    Can anyone help with this? Thanks!

    No video and audio signals to the tv connected

  • My Mac laptop screen is black but everything else is on

    My Mac laptop screen is black but everything else is on.

    Hey Cdronet14,
    Thanks for the question. I understand you are experiencing issues with your iPhone 5. I see that you have already attempted a reset of the device. To isolate the issue further and determine if it is hardware related, the next step would be to backup and restore your device as new:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    Thanks,
    Matt M.

  • My laptop' screen is black and only show the arrow of the mouse .. How can I fix it ??

    Hi,
    My laptop was working without any issue
    I keep it charged .. Then suddenly the screen
    Is black and all what it's show is the arrow of the mouse
    I can see it move !!
    How can I fix it ??
    Please help :( 

    Blank (lighted, but black) screen with cursor at bootup

  • Laptop screen remains black (off) when I turn on the computer

    Hello,
    Today I came home and turned on my laptop as usual except this time the screen remained black. I can hear the fan running and then the usual windows chime at start up, but nothing to view. The HP logo at the back still lights up though. Just the actual screen remains completely black like it is off. I tried connecting it to my tv via HDMI and to an external monitor but there's no signal. I also tried doing a hard reset which I read about here but that did nothing.  I feel as though it's just the monitor won't turn on but everything else might be fine.

    Hello @brianh123,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook's screen remains black when your power on your computer, and I would be happy to assist you!
    Since the image will not appear on either the notebook or the external monitor, I believe there is a startup issue with your computer. To enable your notebook to power on correctly, I recommend following the steps in this document on Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    If the issue continues, I recommend contacting our technical support at 800-474-6836 for hardware replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Laptop screen went black

    I was in the middle of working on a document when my laptop screen went white and then went black. The fan started getting really loud. The caps light would still work but I could not get the screen to come back on again. After shutting it down, now anytime I turn it on, the fan is really loud and the screen is black.
    A. Is my hard drive completely gone?
    B. Will I be able to get documents from my hard drive if I boot it up in Target mode or by using an external monitor?

    Hi Artassassin,
    It's difficult to determine the exact problem from the description you give, but most likely, your HD is fine.
    I assume you've simply tried the 'brightness' buttons on the keyboard, to make sure the screen's just not turned off?
    Assuming it's not that easy: It sounds like you're on the right track. Try using an external monitor first, and if that doesn't work, then try starting up in Target Disk Mode, to save your data. Do you have access to other macs? If so, while in Target Disk Mode, run Disk Utility and see if there are problems with the hd.

  • Narcoleptic laptop - screen goes black while working

    Hi ho,
    About a week ago my mac started acting strange. I'll be working and the screen will just go black. (it just did it again! Sometimes if I'm listening to music on my mac, the music will stop, so it's not just the screen going black, it's like the computer goes to sleep out of the blue.
    I was trying out bittorent for the first time and I'm wondering it it's related to that, if there is something I don't know coming on to my computer from the internet, please advise. I took bittorent off and it'll still appear. A window from Opera will open, so I took Opera off my computer in case there is something downloading. I never use Opera, so I don't know why it keeps coming up.
    When it goes black, sometimes if I click the power button, I'll hear the disk repower up and the screen will go on, but it isn't all the time. Once I get it started again, it may be a few minutes and it'ss do it again without warning, or it could be 10 seconds. There's no rhyme or reason.
    Another thing I notice is that the laptop will get hot, and I'm wondering if it's an emergency mechanism if the computer is getting too hot.
    Please help, of course, I'm dead without being able to use my computer! And this is totally messing with my productivity!
    Message was edited by: madamep

    Hi, madamep. A properly-functioning Powerbook should put itself to sleep (not shut down entirely) before it gets hot enough to do real damage to itself. That may be what's happening with yours, as you say it seems to be getting pretty hot.
    I suggest opening Activity Monitor and seeing whether something is using a lot of CPU cycles a lot of the time, thus generating extra heat. If you find that something is, and it's something you recognize and can comfortably turn off, do so. Then see whether the unexpected-sleep problem diminishes or disappears. If there's nothing drawing heavily on your processor, are you using the Powerbook on a soft surface (bed, sofa, lap, etc.) that's inhibiting airflow around the PB's shell and through its cooling vents? If so, don't: it needs unobstructed airflow all around it, including underneath — that's why it has little rubber feet, to keep it elevated slightly above your table- or desktop. Always use it on a hard, flat surface, and if the feet have come off it, replace them with something that will provide airspace under the PB at all times. Also check to make sure the vents haven't become clogged with dust or fuzz: use canned compressed air or a household vacuum cleaner (not the brush attachment — that can generate a lot of static electricity that's dangerous to electronics) to clean the vents from the outside.

  • Laptop screen blank

    My MacPro laptop screen is blank and cannot see my sign in page, can you help

    Hello smallt,
    I would recommend that you take a look at some of the troubleshooting steps found in the article below.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Hope that helps,
    Griff W.

  • Laptop screen is Black! PLZ Help

    Hi All.  Happy Holidays!  
    I am not too computer savvy but I try!!   All of a sudden my notebook screen is blank.  My computer is charged fully.  I can turn it on and I hear it turn on and WINDOWS boot up but my screen is blank and black.  There is no life on it at all.  
    Any suggestions??
    THX!

    Hi,
    Try a Hard Reset as follows.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for a full minute.  Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
    If the above doesn't help the issue, try connecting the notebook to an external display and see if you now get a video output.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My laptop screen when black now it will not turn on or off. And is there a way to see everything that has been done to my laptop at a apple store?

    My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?

    If I were you I would call Apple Customer Relations (800) 767-2775.  Tell them exactly what you stated in your post in a polite way.  See what they can do for you.
    Nickc111209 wrote:
    is there a way to see everything that has been done to this laptop through the apple store?
    Yes.  And also on Apple's repair history website.

  • The Laptop Screen Blank

    I bought my HP Pavilion 15-p247sa about 3 months ago and I've been using it well until I cracked the screen. When I had my laptop back, I thought my laptop was once again all right and I was very wrong. This morning, I was on Google Maps on Chrome and I kept the browser on until 6pm when I realised that my laptop turned itself to power saving mode. So I tried to turn it on, but the screen remained blank. However, there was a faint sence of light in the monitor, and I presumed that the monitor is NOT broken. I think it is because of some software reasons that I don't understand.  However, I also discovered that the HDMI connection with my TV did not fail. The only thing that I tried was to do this: Turn off the computer, and then remove the power cord.With the power cord disconnected, press and hold the power button for five seconds.Reconnect the power cord, and then turn on the computer.Repeatedly press the F10 key about once every second for five seconds after turning the computer on.Wait five seconds.Press the F5 key. This restores the default settings of the BIOS.Press the Enter key. This accepts the changes.Press the F10 key. This opens the Save and Exit window.Press the Enter key. This saves the changes, exits the BIOS, and then the computer restarts.which is meant to downgrade me to the earliest BIOS, according to this guide. Please help me through this matters as I am leaving the country of purchase of this laptop in about a month.  Thank you very much everyone. 

    Hi Tutor. After all, I had to restore the system without taking backup. Fortunately, it was a software problem. The PC is now recovered and working perfectly, although all information has gone.
    Thank you.

  • My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

    Hello all,
         Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
    My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
    Thank you very much in advance!
    Sincerely,
    Saggz.

    Hey Fleurdemimi,
    Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • [solved] Laptop screen stays off

    After updating today which only gave me a new kernel(which I had been ignoring), mkinitcpio-busybox and systemd 192-1, the screen stays off when I open the lid.
    Normally when I close the lid, walk into another room and open the lid, the screen is on before I get the lid to 45 degrees. This morning after updating and rebooting to use the new kernel and using it for a while, I shut the lid to carry the laptop to a new location and when I opened the lid the screen stayed off.
    I thought the f*&^%$&ng screen had died.
    I'm guessing it's something in the systemd update that is suspending or hibernating the system as a keypress and 5-10 sec wait has the screen back on but I don't want that. Can I get a clue on what to undo so I have the usual behaviour back?
    Last edited by moetunes (2012-09-28 06:47:25)

    If you don't want things to ever change, Slackware might be a better option for you than a very fast paced rolling release like Arch.
    With systemd, Linux is seeing more change than it's seen in a long time.

Maybe you are looking for

  • XML Publisher Email Body Attached Bursting Control File 11i EBS HRMS

    Hi there I have a problem with the Brusting , when I received an email through the bursting, I get the Email Body as an Attached File. XML Publsiher 5.6 Build 45 EBS 11.5.10.2 <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="burst

  • How to parameter Target System in eCATT

    Dear all, I would like to know if it is possible to have the Target System in the eCATT editor to parameterize them like the interfaces? In fact from solution manager I have to run a business scenario in diffrent satellite systems with RFC connection

  • Copy and paste short cut keys stopped working

    Im not too sure when it happened, but "command C, command x and command V" don't work. I can highlight and go up to the menu bar, select copy, then select paste and it will work. I can't add a custom shortcut for copy, cut and paste. Any suggestions

  • Audiogy - 1394 Port - DV video sync on rec

    Hi all, Input/Capture work fine. When export/preview DV video to my DV (sony PC9 /Cannon MVX-350i) work fine. The problem is: When start record mode on the cameras, there are frames lost. ( sec recording, black signal, 2 sec recording and go on). Tha

  • How do I get rid of the unnecessary animations everywhere?

    I've just uopgraded and have found a few irritating animations i want to get rid of. In the past if I clicked a button there would a fraction of a delay and your command would happen, now you have to wait a good 2-3 seconds while the computer gears u