[Solved] Lenovo Y560 Sleeve

I just bought a Lenovo Y560 and was wondering what size sleeve I should get. I am looking to purchase the BuiltNY Cargo Laptop Sleeve, but I don't know if I should get the Medium (15.4) or the Large (17).
If anyone has purchased a sleeve for their Lenovo, please tell me what size worked. If I at least have the dimensions of the sleeve that will help me as well.
Thanks.
==UPDATE==
I ended up purchasing the BuiltNY Laptop Sleeve - Notebook sleeve - 16" - black and it fits perfectly. If you are interested in the Cargo Laptop Sleeve I would probably recommend the Large, because the 16" fits just right and any smaller sleeve would be pretty tight fitting.

Installing Ubuntu inside Windows is not only Faster than a LiveCD, but is better in some ways. Just download Ubuntu's ISO image and load it with something like daemontools. Install it inside windows, when it is done reboot. Press down to choose Ubuntu and press enter. It will finish installing Ubuntu. When it is done installing and loads Ubuntu then wait a few minutes for the Updater to load (unless you where connected to the internet while installing, as it updates then) When updates are done and you reboot. You now have dual booting windows and ubuntu. If for some reason or another you change your mind later, you can just uninstall ubuntu in windows like any other program. You only need atleast 4g of space to install inside windows (maybe 3g of space now, not sure) Cheers!
In my opinion, LiveCD's ruin a new Linux user's experiance as it is sluggish and a little buggy depeneding on your PC rather than it being installed on the drive. Inside windows does not mess up anything nor is a Partiton created when installed inside windows either.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community   Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

  • SOLVED : Lenovo X60 spontaneou​s sleep mode problem.

    The problem is the flat panel screen! (either t-conn board and/or backlight). Viewiz HV121X03-100 Part No. 42T0359 FRU No. 13N7205. LCD : Wistron P/N:60.4Q443.001
    I have 2 identical of Lenovo X60 laptops, with swivel-type-hinge at center. One has this spontaneous sleeping mode problem. I thought it was the Inverter problem - WRONG. Next some say it's the motherboard, CPU fan & heatsink, BIOS updates wrong also. All of these assumptions and theories are wrong diagnosed.
    Solution replace the flat panel screen (very expensive because it has Wacom digitizer glass on top of the screen and board at the bottom.)
    Roan
    Computer Technician
    Chapel Hill, NC

    Hello @Tilia,
    I have read your post on how your notebook computer is experiencing an issue with waking up from sleep mode, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues in Windows 8. This should help configure your power management settings to effectively use sleep mode on your system. 
    Additionally, you can also restore your notebook's default power schemes by following the steps below:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [SOLVED] Lenovo T61 will not go to standby/suspend

    Hi All -
    My Lenovo T61 will no longer suspend/standby.  It seems like its going to, half-moon begins flashing but then it seems to come back to a halfway state and I see "Syncing Filesystems" on the screen...  Any clues as to where I should look to gain some insight here?  FWIW this only started happening recently, it was working great for a long time beforehand.
    Thanks,
    Archieman
    Last edited by Archieman (2011-08-09 02:58:23)

    Archieman wrote:
    majeste wrote:
    Archieman wrote:UPDATE:  A very similar issue started happening on my Lenovo X61 now too.  What the heck is going on here???
    I have the same problem in T410, but I can not solve it with your method.
    I wonder if it affects all thinkpad models...
    Can you solve it in both in T61 and X61 by "rmmod vboxdrv"?

  • [SOLVED] Lenovo Y50-70 blank screen on startup

    Hello Everybody, I just bought a Lenovo Y50-70, with no operating system. Problem is, I'm not able to enter the UEFI or start the installation media in any way. I'm just presented with a black screen, whatever I do (tried every key while powering on: novo button, F2, DEL, F12, ecc...). Any suggestions? Thanks in advance

    My screen is also having th "Black Screen of death" but i'm still able to see the notifications from my antivirus, pc booster and all that other stuff. any idea on solving it?

  • [Solved] Lenovo u460 Ambient Light Sensor/Backlight/Keyboard Weirdness

    Hi all,
    I have tried to figure this problem out ever since I first installed Arch a few months ago (coming from Fedora/Ubuntu where this never occured). This is going to be a little hard to describe, so please bear with me. Here are the symptoms:
    1) The brightness controls (Fn+Up/Fn+Down) don't affect the screen brightness. Also, if acpi_backlight=legacy, then the message "ACPI: Failed to switch the brightness" pops up in dmesg. If acpi_backlight=vendor, then nothing gets printed, though the tty console cursor does "blip" as if a normal key were pressed.
    2) If acpi_backlight=legacy, the message "ACPI: Failed to switch the brightness" pops up in dmesg repeatedly until I do what I think "resets" the ALS, which is to press Fn+Down several times followed by Fn+Up several times. If ambient light conditions change, these messages start again.
    3) The characters ^@ appear in the console occasionally (thought it only seems to happen before the login prompt or after a shutdown signal).
    4) Occasionally I will get a system beep during boot (which may or may not be related).
    5) This problem seems to insert invisible characters into stdin, so I cannot login in a tty (unless I do the aforementioned "reset"). This does not happen in an X session.
    6) I can set the screen brightness through /sys/class/backlight/acpi_video0/brightness (0-10) and /sys/class/backlight/intel_backlight/brightness (0-4882). I believe I can also use setpci. If acpi_backlight=vendor, then acpi_video0 gets renamed to ideapad, and brightness can no longer be changed through there. intel_backlight still works.
    7) Keys do not repeat (unless I do the "reset" above).
    What I've tried:
    1) Setting acpi_backlight and acpi_osi
    2) Extract and recompile the DSDT, fixing errors and warnings, compile custom kernel with new DSDT included.
    3) Reinstall from scratch
    4) Looked to see if there was a BIOS update. I seem to have the latest (v1.04)
    So, any ideas on how to fix this? Let me know if I forgot to post something.
    Some system information:
    # uname -a
    Linux gbpits 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
    # lspci -v
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    Subsystem: Lenovo Device 391e
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device 3920
    Flags: bus master, fast devsel, latency 0, IRQ 40
    Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at 4050 [size=8]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [d0] Power Management version 2
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: i915
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    Subsystem: Lenovo Device 38a5
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at d6406100 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
    Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 38aa
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at d6405c00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    Subsystem: Lenovo Device 38af
    Flags: bus master, fast devsel, latency 0, IRQ 43
    Memory at d6400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [130] Root Complex Link
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: d5400000-d63fffff
    Prefetchable memory behind bridge: 00000000d0400000-00000000d13fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Lenovo Device 38b0
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: d4400000-d53fffff
    Prefetchable memory behind bridge: 00000000d1400000-00000000d23fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Lenovo Device 38b1
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: d3400000-d43fffff
    Prefetchable memory behind bridge: 00000000d2400000-00000000d33fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Lenovo Device 38b2
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 38b8
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at d6405800 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
    Capabilities: [50] Subsystem: Lenovo Device 383f
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    Subsystem: Lenovo Device 38be
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=10 <?>
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Lenovo Device 38c1
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
    I/O ports at 4048 [size=8]
    I/O ports at 405c [size=4]
    I/O ports at 4040 [size=8]
    I/O ports at 4058 [size=4]
    I/O ports at 4020 [size=32]
    Memory at d6405000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [70] Power Management version 3
    Capabilities: [a8] SATA HBA v1.0
    Capabilities: [b0] PCI Advanced Features
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    Subsystem: Lenovo Device 38bf
    Flags: medium devsel, IRQ 19
    Memory at d6406000 (64-bit, non-prefetchable) [size=256]
    I/O ports at 4000 [size=32]
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    Subsystem: Lenovo Device 38c0
    Flags: bus master, fast devsel, latency 0, IRQ 21
    Memory at d6404000 (64-bit, non-prefetchable) [size=4K]
    Capabilities: [50] Power Management version 3
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Kernel driver in use: intel ips
    02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
    Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at d4400000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: [c8] Power Management version 3
    Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [e0] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number 00-26-c7-ff-ff-50-da-20
    Kernel driver in use: iwlwifi
    03:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0)
    Subsystem: Lenovo Device 3958
    Flags: fast devsel, IRQ 45
    Memory at d3400000 (64-bit, non-prefetchable) [disabled] [size=256K]
    I/O ports at 1000 [disabled] [size=128]
    Capabilities: [40] Power Management version 3
    Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [58] Express Endpoint, MSI 00
    Capabilities: [6c] Vital Product Data
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [180] Device Serial Number ff-30-2b-91-88-ae-1d-ff
    Kernel driver in use: atl1c
    7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Lenovo Device 392b
    Flags: bus master, fast devsel, latency 0
    # journalctl
    -- Logs begin at Wed 2013-01-16 00:09:32 EST, end at Wed 2013-01-16 00:35:58 EST. --
    Jan 16 00:09:32 gbpits systemd-journal[148]: Allowing runtime journal files to grow to 187.9M.
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys cpuset
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys cpu
    Jan 16 00:09:32 gbpits kernel: Linux version 3.6.11-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012
    Jan 16 00:09:32 gbpits kernel: Command line: BOOT_IMAGE=/__active/boot/vmlinuz-linux root=UUID=b568f59c-f490-4404-afdf-cd0b7dd1fbc4 ro rootflags=subvol=__active quiet acpi_osi=Linux
    Jan 16 00:09:32 gbpits kernel: e820: BIOS-provided physical RAM map:
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bb63efff] usable
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000bb63f000-0x00000000bb6befff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000bb6bf000-0x00000000bb7befff] ACPI NVS
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000bb7bf000-0x00000000bb7fefff] ACPI data
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Jan 16 00:09:32 gbpits kernel: BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
    Jan 16 00:09:32 gbpits kernel: NX (Execute Disable) protection: active
    Jan 16 00:09:32 gbpits kernel: DMI 2.6 present.
    Jan 16 00:09:32 gbpits kernel: DMI: LENOVO 0877 /Base Board Product Name, BIOS 31CN23WW(V1.04) 05/31/2010
    Jan 16 00:09:32 gbpits kernel: e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    Jan 16 00:09:32 gbpits kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 16 00:09:32 gbpits kernel: No AGP bridge found
    Jan 16 00:09:32 gbpits kernel: e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
    Jan 16 00:09:32 gbpits kernel: MTRR default type: uncachable
    Jan 16 00:09:32 gbpits kernel: MTRR fixed ranges enabled:
    Jan 16 00:09:32 gbpits kernel: 00000-9FFFF write-back
    Jan 16 00:09:32 gbpits kernel: A0000-BFFFF uncachable
    Jan 16 00:09:32 gbpits kernel: C0000-EFFFF write-through
    Jan 16 00:09:32 gbpits kernel: F0000-FFFFF write-combining
    Jan 16 00:09:32 gbpits kernel: MTRR variable ranges enabled:
    Jan 16 00:09:32 gbpits kernel: 0 base 000000000 mask F80000000 write-back
    Jan 16 00:09:32 gbpits kernel: 1 base 0FFE00000 mask FFFE00000 write-protect
    Jan 16 00:09:32 gbpits kernel: 2 base 080000000 mask FC0000000 write-back
    Jan 16 00:09:32 gbpits kernel: 3 base 0BC000000 mask FFC000000 uncachable
    Jan 16 00:09:32 gbpits kernel: 4 base 0BB800000 mask FFF800000 uncachable
    Jan 16 00:09:32 gbpits kernel: 5 base 100000000 mask FC0000000 write-back
    Jan 16 00:09:32 gbpits kernel: 6 base 138000000 mask FF8000000 uncachable
    Jan 16 00:09:32 gbpits kernel: 7 disabled
    Jan 16 00:09:32 gbpits kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 16 00:09:32 gbpits kernel: e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
    Jan 16 00:09:32 gbpits kernel: initial memory mapped: [mem 0x00000000-0x1fffffff]
    Jan 16 00:09:32 gbpits kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    Jan 16 00:09:32 gbpits kernel: init_memory_mapping: [mem 0x00000000-0xbb7fffff]
    Jan 16 00:09:32 gbpits kernel: [mem 0x00000000-0xbb7fffff] page 2M
    Jan 16 00:09:32 gbpits kernel: kernel direct mapping tables up to 0xbb7fffff @ [mem 0x1fffc000-0x1fffffff]
    Jan 16 00:09:32 gbpits kernel: init_memory_mapping: [mem 0x100000000-0x137ffffff]
    Jan 16 00:09:32 gbpits kernel: [mem 0x100000000-0x137ffffff] page 2M
    Jan 16 00:09:32 gbpits kernel: kernel direct mapping tables up to 0x137ffffff @ [mem 0xbb63d000-0xbb63efff]
    Jan 16 00:09:32 gbpits kernel: RAMDISK: [mem 0x37962000-0x37ca8fff]
    Jan 16 00:09:32 gbpits kernel: ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
    Jan 16 00:09:32 gbpits kernel: ACPI: XSDT 00000000bb7fe120 00084 (v01 LENOVO CB-01 00000001 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: FACP 00000000bb7fc000 000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: DSDT 00000000bb7ed000 0B1E8 (v02 LENOVO CB-01 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: FACS 00000000bb75a000 00040
    Jan 16 00:09:32 gbpits kernel: ACPI: ASF! 00000000bb7fd000 000A5 (v32 INTEL Calpella 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: HPET 00000000bb7fb000 00038 (v01 LENOVO CB-01 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: APIC 00000000bb7fa000 0008C (v02 INTEL Calpella 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: MCFG 00000000bb7f9000 0003C (v01 LENOVO CB-01 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: SLIC 00000000bb7ec000 00176 (v01 LENOVO CB-01 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: BOOT 00000000bb7e9000 00028 (v01 INTEL Calpella 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: ASPT 00000000bb7e6000 00034 (v04 INTEL Calpella 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: WDAT 00000000bb7e5000 00224 (v01 INTEL Calpella 00000001 MSFT 01000013)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb7e4000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb7e3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb7e2000 0049F (v01 PmRef ApTst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Local APIC address 0xfee00000
    Jan 16 00:09:32 gbpits kernel: No NUMA configuration found
    Jan 16 00:09:32 gbpits kernel: Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
    Jan 16 00:09:32 gbpits kernel: Initmem setup node 0 [mem 0x00000000-0x137ffffff]
    Jan 16 00:09:32 gbpits kernel: NODE_DATA [mem 0x137ffc000-0x137ffffff]
    Jan 16 00:09:32 gbpits kernel: [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
    Jan 16 00:09:32 gbpits kernel: Zone ranges:
    Jan 16 00:09:32 gbpits kernel: DMA [mem 0x00010000-0x00ffffff]
    Jan 16 00:09:32 gbpits kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 16 00:09:32 gbpits kernel: Normal [mem 0x100000000-0x137ffffff]
    Jan 16 00:09:32 gbpits kernel: Movable zone start for each node
    Jan 16 00:09:32 gbpits kernel: Early memory node ranges
    Jan 16 00:09:32 gbpits kernel: node 0: [mem 0x00010000-0x0009cfff]
    Jan 16 00:09:32 gbpits kernel: node 0: [mem 0x00100000-0xbb63efff]
    Jan 16 00:09:32 gbpits kernel: node 0: [mem 0xbb7ff000-0xbb7fffff]
    Jan 16 00:09:32 gbpits kernel: node 0: [mem 0x100000000-0x137ffffff]
    Jan 16 00:09:32 gbpits kernel: On node 0 totalpages: 996813
    Jan 16 00:09:32 gbpits kernel: DMA zone: 64 pages used for memmap
    Jan 16 00:09:32 gbpits kernel: DMA zone: 6 pages reserved
    Jan 16 00:09:32 gbpits kernel: DMA zone: 3911 pages, LIFO batch:0
    Jan 16 00:09:32 gbpits kernel: DMA32 zone: 16320 pages used for memmap
    Jan 16 00:09:32 gbpits kernel: DMA32 zone: 747136 pages, LIFO batch:31
    Jan 16 00:09:32 gbpits kernel: Normal zone: 3584 pages used for memmap
    Jan 16 00:09:32 gbpits kernel: Normal zone: 225792 pages, LIFO batch:31
    Jan 16 00:09:32 gbpits kernel: ACPI: PM-Timer IO Port: 0x408
    Jan 16 00:09:32 gbpits kernel: ACPI: Local APIC address 0xfee00000
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    Jan 16 00:09:32 gbpits kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jan 16 00:09:32 gbpits kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jan 16 00:09:32 gbpits kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 16 00:09:32 gbpits kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jan 16 00:09:32 gbpits kernel: ACPI: IRQ0 used by override.
    Jan 16 00:09:32 gbpits kernel: ACPI: IRQ2 used by override.
    Jan 16 00:09:32 gbpits kernel: ACPI: IRQ9 used by override.
    Jan 16 00:09:32 gbpits kernel: Using ACPI (MADT) for SMP configuration information
    Jan 16 00:09:32 gbpits kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jan 16 00:09:32 gbpits kernel: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    Jan 16 00:09:32 gbpits kernel: nr_irqs_gsi: 40
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000bb63f000 - 00000000bb6bf000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000bb6bf000 - 00000000bb7bf000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000bb7bf000 - 00000000bb7ff000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000f8000000 - 00000000feb00000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
    Jan 16 00:09:32 gbpits kernel: PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Jan 16 00:09:32 gbpits kernel: e820: [mem 0xc0000000-0xefffffff] available for PCI devices
    Jan 16 00:09:32 gbpits kernel: Booting paravirtualized kernel on bare hardware
    Jan 16 00:09:32 gbpits kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    Jan 16 00:09:32 gbpits kernel: PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s84608 r8192 d21888 u262144
    Jan 16 00:09:32 gbpits kernel: pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    Jan 16 00:09:32 gbpits kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Jan 16 00:09:32 gbpits kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 976839
    Jan 16 00:09:32 gbpits kernel: Policy zone: Normal
    Jan 16 00:09:32 gbpits kernel: Kernel command line: BOOT_IMAGE=/__active/boot/vmlinuz-linux root=UUID=b568f59c-f490-4404-afdf-cd0b7dd1fbc4 ro rootflags=subvol=__active quiet acpi_osi=Linux
    Jan 16 00:09:32 gbpits kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 16 00:09:32 gbpits kernel: __ex_table already sorted, skipping sort
    Jan 16 00:09:32 gbpits kernel: Checking aperture...
    Jan 16 00:09:32 gbpits kernel: No AGP bridge found
    Jan 16 00:09:32 gbpits kernel: Calgary: detecting Calgary via BIOS EBDA area
    Jan 16 00:09:32 gbpits kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Jan 16 00:09:32 gbpits kernel: Memory: 3842208k/5111808k available (4728k kernel code, 1124556k absent, 145044k reserved, 4142k data, 772k init)
    Jan 16 00:09:32 gbpits kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Jan 16 00:09:32 gbpits kernel: Preemptible hierarchical RCU implementation.
    Jan 16 00:09:32 gbpits kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 16 00:09:32 gbpits kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 16 00:09:32 gbpits kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    Jan 16 00:09:32 gbpits kernel: NR_IRQS:4352 nr_irqs:744 16
    Jan 16 00:09:32 gbpits kernel: Extended CMOS year: 2000
    Jan 16 00:09:32 gbpits kernel: Console: colour dummy device 80x25
    Jan 16 00:09:32 gbpits kernel: console [tty0] enabled
    Jan 16 00:09:32 gbpits kernel: allocated 16252928 bytes of page_cgroup
    Jan 16 00:09:32 gbpits kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 16 00:09:32 gbpits kernel: hpet clockevent registered
    Jan 16 00:09:32 gbpits kernel: tsc: Fast TSC calibration using PIT
    Jan 16 00:09:32 gbpits kernel: tsc: Detected 2260.853 MHz processor
    Jan 16 00:09:32 gbpits kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.11 BogoMIPS (lpj=7536176)
    Jan 16 00:09:32 gbpits kernel: pid_max: default: 32768 minimum: 301
    Jan 16 00:09:32 gbpits kernel: Security Framework initialized
    Jan 16 00:09:32 gbpits kernel: AppArmor: AppArmor disabled by boot time parameter
    Jan 16 00:09:32 gbpits kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 16 00:09:32 gbpits kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jan 16 00:09:32 gbpits kernel: Mount-cache hash table entries: 256
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys cpuacct
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys memory
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys devices
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys freezer
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys net_cls
    Jan 16 00:09:32 gbpits kernel: Initializing cgroup subsys blkio
    Jan 16 00:09:32 gbpits kernel: CPU: Physical Processor ID: 0
    Jan 16 00:09:32 gbpits kernel: CPU: Processor Core ID: 0
    Jan 16 00:09:32 gbpits kernel: mce: CPU supports 9 MCE banks
    Jan 16 00:09:32 gbpits kernel: CPU0: Thermal monitoring enabled (TM1)
    Jan 16 00:09:32 gbpits kernel: process: using mwait in idle threads
    Jan 16 00:09:32 gbpits kernel: [121B blob data]
    Jan 16 00:09:32 gbpits kernel: ACPI: Core revision 20120711
    Jan 16 00:09:32 gbpits kernel: ftrace: allocating 18351 entries in 72 pages
    Jan 16 00:09:32 gbpits kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 16 00:09:32 gbpits kernel: smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 02
    Jan 16 00:09:32 gbpits kernel: Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    Jan 16 00:09:32 gbpits kernel: perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    Jan 16 00:09:32 gbpits kernel: ... version: 3
    Jan 16 00:09:32 gbpits kernel: ... bit width: 48
    Jan 16 00:09:32 gbpits kernel: ... generic registers: 4
    Jan 16 00:09:32 gbpits kernel: ... value mask: 0000ffffffffffff
    Jan 16 00:09:32 gbpits kernel: ... max period: 000000007fffffff
    Jan 16 00:09:32 gbpits kernel: ... fixed-purpose events: 3
    Jan 16 00:09:32 gbpits kernel: ... event mask: 000000070000000f
    Jan 16 00:09:32 gbpits kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 16 00:09:32 gbpits kernel: smpboot: Booting Node 0, Processors #1 #2 #3
    Jan 16 00:09:32 gbpits kernel: Brought up 4 CPUs
    Jan 16 00:09:32 gbpits kernel: smpboot: Total of 4 processors activated (18094.44 BogoMIPS)
    Jan 16 00:09:32 gbpits kernel: devtmpfs: initialized
    Jan 16 00:09:32 gbpits kernel: PM: Registering ACPI NVS region [mem 0xbb6bf000-0xbb7befff] (1048576 bytes)
    Jan 16 00:09:32 gbpits kernel: NET: Registered protocol family 16
    Jan 16 00:09:32 gbpits kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    Jan 16 00:09:32 gbpits kernel: ACPI: bus type pci registered
    Jan 16 00:09:32 gbpits kernel: PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    Jan 16 00:09:32 gbpits kernel: PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    Jan 16 00:09:32 gbpits kernel: PCI: Using configuration type 1 for base access
    Jan 16 00:09:32 gbpits kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Jan 16 00:09:32 gbpits kernel: mtrr: probably your BIOS does not setup all CPUs.
    Jan 16 00:09:32 gbpits kernel: mtrr: corrected configuration.
    Jan 16 00:09:32 gbpits kernel: bio: create slab <bio-0> at 0
    Jan 16 00:09:32 gbpits kernel: ACPI: Added _OSI(Module Device)
    Jan 16 00:09:32 gbpits kernel: ACPI: Added _OSI(Processor Device)
    Jan 16 00:09:32 gbpits kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 16 00:09:32 gbpits kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 16 00:09:32 gbpits kernel: ACPI: Added _OSI(Linux)
    Jan 16 00:09:32 gbpits kernel: ACPI: EC: Look up EC in DSDT
    Jan 16 00:09:32 gbpits kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jan 16 00:09:32 gbpits kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb691918 00408 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Dynamic OEM Table Load:
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT (null) 00408 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Dynamic OEM Table Load:
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Dynamic OEM Table Load:
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT 00000000bb68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Dynamic OEM Table Load:
    Jan 16 00:09:32 gbpits kernel: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    Jan 16 00:09:32 gbpits kernel: ACPI: Interpreter enabled
    Jan 16 00:09:32 gbpits kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 16 00:09:32 gbpits kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 16 00:09:32 gbpits kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Jan 16 00:09:32 gbpits kernel: ACPI: No dock devices found.
    Jan 16 00:09:32 gbpits kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jan 16 00:09:32 gbpits kernel: \_SB_.PCI0:_OSC invalid UUID
    Jan 16 00:09:32 gbpits kernel: _OSC request data:1 8 1f
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    Jan 16 00:09:32 gbpits kernel: PCI host bridge to bus 0000:00
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: busn_res: [bus 00-7e] is inserted under domain [bus 00-ff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: root bus resource [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:02.0: reg 20: [io 0x4050-0x4057]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:16.0: reg 10: [mem 0xd6406100-0xd640610f 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1a.0: reg 10: [mem 0xd6405c00-0xd6405fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1b.0: reg 10: [mem 0xd6400000-0xd6403fff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1d.0: reg 10: [mem 0xd6405800-0xd6405bff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: reg 24: [mem 0xd6405000-0xd64057ff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.3: reg 10: [mem 0xd6406000-0xd64060ff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1f.6: reg 10: [mem 0xd6404000-0xd6404fff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    Jan 16 00:09:32 gbpits kernel: pci 0000:02:00.0: reg 10: [mem 0xd4400000-0xd4401fff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd53fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pci 0000:03:00.0: [1969:1063] type 00 class 0x020000
    Jan 16 00:09:32 gbpits kernel: pci 0000:03:00.0: reg 10: [mem 0xd3400000-0xd343ffff 64bit]
    Jan 16 00:09:32 gbpits kernel: pci 0000:03:00.0: reg 18: [io 0x1000-0x107f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [mem 0xd3400000-0xd43fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    Jan 16 00:09:32 gbpits kernel: \_SB_.PCI0:_OSC invalid UUID
    Jan 16 00:09:32 gbpits kernel: _OSC request data:1 1f 1f
    Jan 16 00:09:32 gbpits kernel: pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    Jan 16 00:09:32 gbpits kernel: pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    Jan 16 00:09:32 gbpits kernel: PCI host bridge to bus 0000:7f
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:7f: busn_res: [bus 7f] is inserted under domain [bus 00-ff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:7f: root bus resource [bus 7f]
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    Jan 16 00:09:32 gbpits kernel: pci0000:7f: ACPI _OSC support notification failed, disabling PCIe ASPM
    Jan 16 00:09:32 gbpits kernel: pci0000:7f: Unable to request _OSC control (_OSC support mask: 0x08)
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jan 16 00:09:32 gbpits kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    Jan 16 00:09:32 gbpits kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 16 00:09:32 gbpits kernel: vgaarb: loaded
    Jan 16 00:09:32 gbpits kernel: vgaarb: bridge control possible 0000:00:02.0
    Jan 16 00:09:32 gbpits kernel: PCI: Using ACPI for IRQ routing
    Jan 16 00:09:32 gbpits kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 16 00:09:32 gbpits kernel: e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    Jan 16 00:09:32 gbpits kernel: e820: reserve RAM buffer [mem 0xbb63f000-0xbbffffff]
    Jan 16 00:09:32 gbpits kernel: e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
    Jan 16 00:09:32 gbpits kernel: NetLabel: Initializing
    Jan 16 00:09:32 gbpits kernel: NetLabel: domain hash size = 128
    Jan 16 00:09:32 gbpits kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 16 00:09:32 gbpits kernel: NetLabel: unlabeled traffic allowed by default
    Jan 16 00:09:32 gbpits kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    Jan 16 00:09:32 gbpits kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Jan 16 00:09:32 gbpits kernel: Switching to clocksource hpet
    Jan 16 00:09:32 gbpits kernel: pnp: PnP ACPI init
    Jan 16 00:09:32 gbpits kernel: ACPI: bus type pnp registered
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [bus 00-7e]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [io 0x0000-0x0cf7 window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [io 0x0cf8-0x0cff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [io 0x0d00-0xffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000cc000-0x000cffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000dc000-0x000dffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000ec000-0x000effff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0x000f0000-0x000fffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0xc0000000-0xfeafffff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [io 0x0068-0x006f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: [io 0x0700-0x0707]
    Jan 16 00:09:32 gbpits kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: [io 0x0000-0x001f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: [io 0x0081-0x0091]
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: [io 0x0093-0x009f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: [io 0x00c0-0x00df]
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: [dma 4]
    Jan 16 00:09:32 gbpits kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:02: [mem 0xff000000-0xffffffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:03: [mem 0xfed00000-0xfed003ff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:04: [io 0x00f0]
    Jan 16 00:09:32 gbpits kernel: pnp 00:04: [irq 13]
    Jan 16 00:09:32 gbpits kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x002e-0x002f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x004e-0x004f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0061]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0063]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0065]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0067]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0068-0x006f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0070]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0080]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0092]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x00b2-0x00b3]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0680-0x069f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0800-0x080f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0xffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0xffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0400-0x047f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x0500-0x057f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: [io 0x164e-0x164f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff]
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0x0680-0x069f] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0x0800-0x080f] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0xffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0xffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0x0400-0x047f] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: [io 0x0500-0x057f] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:06: [io 0x0070-0x0077]
    Jan 16 00:09:32 gbpits kernel: pnp 00:06: [irq 8]
    Jan 16 00:09:32 gbpits kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:07: [irq 12]
    Jan 16 00:09:32 gbpits kernel: pnp 00:07: Plug and Play ACPI device, IDs SYN0720 SYN0700 SYN0002 PNP0f13 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:08: [io 0x0060]
    Jan 16 00:09:32 gbpits kernel: pnp 00:08: [io 0x0064]
    Jan 16 00:09:32 gbpits kernel: pnp 00:08: [irq 1]
    Jan 16 00:09:32 gbpits kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed10000-0xfed13fff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed18000-0xfed18fff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed19000-0xfed19fff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xf0000000-0xf1ffffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xff000000-0xffffffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xfee00000-0xfeefffff]
    Jan 16 00:09:32 gbpits kernel: pnp 00:09: [mem 0xd6500000-0xd6500fff]
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: [mem 0xd6500000-0xd6500fff] has been reserved
    Jan 16 00:09:32 gbpits kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 16 00:09:32 gbpits kernel: pnp 00:0a: [bus 7f]
    Jan 16 00:09:32 gbpits kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    Jan 16 00:09:32 gbpits kernel: pnp: PnP ACPI: found 11 devices
    Jan 16 00:09:32 gbpits kernel: ACPI: ACPI bus type pnp unregistered
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd53fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [mem 0xd3400000-0xd43fffff]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:1e.0: setting latency timer to 64
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:01: resource 1 [mem 0xd5400000-0xd63fffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd53fffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd43fffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:03: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 16 00:09:32 gbpits kernel: pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
    Jan 16 00:09:32 gbpits kernel: NET: Registered protocol family 2
    Jan 16 00:09:32 gbpits kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Jan 16 00:09:32 gbpits kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 16 00:09:32 gbpits kernel: TCP: Hash tables configured (established 524288 bind 65536)
    Jan 16 00:09:32 gbpits kernel: TCP: reno registered
    Jan 16 00:09:32 gbpits kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 16 00:09:32 gbpits kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 16 00:09:32 gbpits kernel: NET: Registered protocol family 1
    Jan 16 00:09:32 gbpits kernel: pci 0000:00:02.0: Boot video device
    Jan 16 00:09:32 gbpits kernel: PCI: CLS 64 bytes, default 64
    Jan 16 00:09:32 gbpits kernel: Unpacking initramfs...
    Jan 16 00:09:32 gbpits kernel: Freeing initrd memory: 3356k freed
    Jan 16 00:09:32 gbpits kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Jan 16 00:09:32 gbpits kernel: software IO TLB [mem 0xb763d000-0xbb63cfff] (64MB) mapped at [ffff8800b763d000-ffff8800bb63cfff]
    Jan 16 00:09:32 gbpits kernel: Simple Boot Flag at 0x44 set to 0x1
    Jan 16 00:09:32 gbpits kernel: audit: initializing netlink socket (disabled)
    Jan 16 00:09:32 gbpits kernel: type=2000 audit(1358312969.413:1): initialized
    Jan 16 00:09:32 gbpits kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 16 00:09:32 gbpits kernel: VFS: Disk quotas dquot_6.5.2
    Jan 16 00:09:32 gbpits kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 16 00:09:32 gbpits kernel: msgmni has been set to 7510
    Jan 16 00:09:32 gbpits kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 16 00:09:32 gbpits kernel: io scheduler noop registered
    Jan 16 00:09:32 gbpits kernel: io scheduler deadline registered
    Jan 16 00:09:32 gbpits kernel: io scheduler cfq registered (default)
    Jan 16 00:09:32 gbpits kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Jan 16 00:09:32 gbpits kernel: vesafb: scrolling: redraw
    Jan 16 00:09:32 gbpits kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Jan 16 00:09:32 gbpits kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90009000000, using 3072k, total 3072k
    Jan 16 00:09:32 gbpits kernel: Console: switching to colour frame buffer device 128x48
    Jan 16 00:09:32 gbpits kernel: fb0: VESA VGA frame buffer device
    Jan 16 00:09:32 gbpits kernel: intel_idle: MWAIT substates: 0x1120
    Jan 16 00:09:32 gbpits kernel: intel_idle: v0.4 model 0x25
    Jan 16 00:09:32 gbpits kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
    Jan 16 00:09:32 gbpits kernel: GHES: HEST is not enabled!
    Jan 16 00:09:32 gbpits kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 16 00:09:32 gbpits kernel: Linux agpgart interface v0.103
    Jan 16 00:09:32 gbpits kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
    Jan 16 00:09:32 gbpits kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 16 00:09:32 gbpits kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jan 16 00:09:32 gbpits kernel: mousedev: PS/2 mouse device common for all mice
    Jan 16 00:09:32 gbpits kernel: rtc_cmos 00:06: RTC can wake from S4
    Jan 16 00:09:32 gbpits kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    Jan 16 00:09:32 gbpits kernel: rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    Jan 16 00:09:32 gbpits kernel: cpuidle: using governor ladder
    Jan 16 00:09:32 gbpits kernel: cpuidle: using governor menu
    Jan 16 00:09:32 gbpits kernel: drop_monitor: Initializing network drop monitor service
    Jan 16 00:09:32 gbpits kernel: TCP: cubic registered
    Jan 16 00:09:32 gbpits kernel: NET: Registered protocol family 10
    Jan 16 00:09:32 gbpits kernel: NET: Registered protocol family 17
    Jan 16 00:09:32 gbpits kernel: Key type dns_resolver registered
    Jan 16 00:09:32 gbpits kernel: PM: Hibernation image not present or could not be loaded.
    Jan 16 00:09:32 gbpits kernel: registered taskstats version 1
    Jan 16 00:09:32 gbpits kernel: rtc_cmos 00:06: setting system clock to 2013-01-16 05:09:30 UTC (1358312970)
    Jan 16 00:09:32 gbpits kernel: Freeing unused kernel memory: 772k freed
    Jan 16 00:09:32 gbpits kernel: Write protecting the kernel read-only data: 8192k
    Jan 16 00:09:32 gbpits kernel: Freeing unused kernel memory: 1404k freed
    Jan 16 00:09:32 gbpits kernel: Freeing unused kernel memory: 568k freed
    Jan 16 00:09:32 gbpits kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 16 00:09:32 gbpits systemd-udevd[53]: starting version 196
    Jan 16 00:09:32 gbpits kernel: [drm] Initialized drm 1.1.0 20060810
    Jan 16 00:09:32 gbpits kernel: agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    Jan 16 00:09:32 gbpits kernel: agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    Jan 16 00:09:32 gbpits kernel: agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    Jan 16 00:09:32 gbpits kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    Jan 16 00:09:32 gbpits kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0C:00/input/input1
    Jan 16 00:09:32 gbpits kernel: ACPI: Power Button [PWRB]
    Jan 16 00:09:32 gbpits kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0E:00/input/input2
    Jan 16 00:09:32 gbpits kernel: ACPI: Sleep Button [SLPB]
    Jan 16 00:09:32 gbpits kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/PNP0C0D:00/input/input3
    Jan 16 00:09:32 gbpits kernel: ACPI: Lid Switch [LID0]
    Jan 16 00:09:32 gbpits kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Jan 16 00:09:32 gbpits kernel: ACPI: Power Button [PWRF]
    Jan 16 00:09:32 gbpits kernel: checking generic (c0000000 300000) vs hw (c0000000 10000000)
    Jan 16 00:09:32 gbpits kernel: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    Jan 16 00:09:32 gbpits kernel: Console: switching to colour dummy device 80x25
    Jan 16 00:09:32 gbpits kernel: i915 0000:00:02.0: setting latency timer to 64
    Jan 16 00:09:32 gbpits kernel: i915 0000:00:02.0: irq 40 for MSI/MSI-X
    Jan 16 00:09:32 gbpits kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    Jan 16 00:09:32 gbpits kernel: [drm] Driver supports precise vblank timestamp query.
    Jan 16 00:09:32 gbpits kernel: [drm] applying lvds SSC disable quirk
    Jan 16 00:09:32 gbpits kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    Jan 16 00:09:32 gbpits kernel: tsc: Refined TSC clocksource calibration: 2260.999 MHz
    Jan 16 00:09:32 gbpits kernel: Switching to clocksource tsc
    Jan 16 00:09:32 gbpits kernel: fbcon: inteldrmfb (fb0) is primary device
    Jan 16 00:09:32 gbpits kernel: Console: switching to colour frame buffer device 170x48
    Jan 16 00:09:32 gbpits kernel: fb0: inteldrmfb frame buffer device
    Jan 16 00:09:32 gbpits kernel: drm: registered panic notifier
    Jan 16 00:09:32 gbpits kernel: acpi device:02: registered as cooling_device0
    Jan 16 00:09:32 gbpits kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    Jan 16 00:09:32 gbpits kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    Jan 16 00:09:32 gbpits kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Jan 16 00:09:32 gbpits kernel: ACPI: bus type usb registered
    Jan 16 00:09:32 gbpits kernel: usbcore: registered new interface driver usbfs
    Jan 16 00:09:32 gbpits kernel: usbcore: registered new interface driver hub
    Jan 16 00:09:32 gbpits kernel: usbcore: registered new device driver usb
    Jan 16 00:09:32 gbpits kernel: SCSI subsystem initialized
    Jan 16 00:09:32 gbpits kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    Jan 16 00:09:32 gbpits kernel: ACPI: bus type scsi registered
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: debug port 2
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd6405c00
    Jan 16 00:09:32 gbpits kernel: libata version 3.00 loaded.
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    Jan 16 00:09:32 gbpits kernel: hub 1-0:1.0: USB hub found
    Jan 16 00:09:32 gbpits kernel: hub 1-0:1.0: 3 ports detected
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: debug port 2
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd6405800
    Jan 16 00:09:32 gbpits kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    Jan 16 00:09:32 gbpits kernel: hub 2-0:1.0: USB hub found
    Jan 16 00:09:32 gbpits kernel: hub 2-0:1.0: 3 ports detected
    Jan 16 00:09:32 gbpits kernel: ahci 0000:00:1f.2: version 3.0
    Jan 16 00:09:32 gbpits kernel: ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    Jan 16 00:09:32 gbpits kernel: ahci: SSS flag set, parallel bus scan disabled
    Jan 16 00:09:32 gbpits kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
    Jan 16 00:09:32 gbpits kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    Jan 16 00:09:32 gbpits kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Jan 16 00:09:32 gbpits kernel: scsi0 : ahci
    Jan 16 00:09:32 gbpits kernel: scsi1 : ahci
    Jan 16 00:09:32 gbpits kernel: scsi2 : ahci
    Jan 16 00:09:32 gbpits kernel: scsi3 : ahci
    Jan 16 00:09:32 gbpits kernel: scsi4 : ahci
    Jan 16 00:09:32 gbpits kernel: ata1: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405100 irq 41
    Jan 16 00:09:32 gbpits kernel: ata2: DUMMY
    Jan 16 00:09:32 gbpits kernel: ata3: DUMMY
    Jan 16 00:09:32 gbpits kernel: ata4: DUMMY
    Jan 16 00:09:32 gbpits kernel: ata5: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405300 irq 41
    Jan 16 00:09:32 gbpits kernel: usb 1-1: new high-speed USB device number 2 using ehci_hcd
    Jan 16 00:09:32 gbpits kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 16 00:09:32 gbpits kernel: ata1.00: ATA-8: Mushkin MKNSSDCL120GB-DX, 320A13F0, max UDMA/133
    Jan 16 00:09:32 gbpits kernel: ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    Jan 16 00:09:32 gbpits kernel: hub 1-1:1.0: USB hub found
    Jan 16 00:09:32 gbpits kernel: hub 1-1:1.0: 6 ports detected
    Jan 16 00:09:32 gbpits kernel: ata1.00: configured for UDMA/133
    Jan 16 00:09:32 gbpits kernel: scsi 0:0:0:0: Direct-Access ATA Mushkin MKNSSDCL 320A PQ: 0 ANSI: 5
    Jan 16 00:09:32 gbpits kernel: usb 2-1: new high-speed USB device number 2 using ehci_hcd
    Jan 16 00:09:32 gbpits kernel: hub 2-1:1.0: USB hub found
    Jan 16 00:09:32 gbpits kernel: hub 2-1:1.0: 8 ports detected
    Jan 16 00:09:32 gbpits kernel: usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
    Jan 16 00:09:32 gbpits kernel: ata5: SATA link down (SStatus 0 SControl 300)
    Jan 16 00:09:32 gbpits kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    Jan 16 00:09:32 gbpits kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 16 00:09:32 gbpits kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 16 00:09:32 gbpits kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 16 00:09:32 gbpits kernel: sda: sda1 sda2
    Jan 16 00:09:32 gbpits kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 16 00:09:32 gbpits kernel: Btrfs loaded
    Jan 16 00:09:32 gbpits kernel: device fsid b568f59c-f490-4404-afdf-cd0b7dd1fbc4 devid 1 transid 8171 /dev/sda2
    Jan 16 00:09:32 gbpits kernel: device fsid b568f59c-f490-4404-afdf-cd0b7dd1fbc4 devid 1 transid 8171 /dev/sda2
    Jan 16 00:09:32 gbpits kernel: btrfs: disk space caching is enabled
    Jan 16 00:09:32 gbpits kernel: Btrfs detected SSD devices, enabling SSD mode
    Jan 16 00:09:32 gbpits kernel: usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
    Jan 16 00:09:32 gbpits systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Jan 16 00:09:32 gbpits systemd[1]: Set hostname to <gbpits>.
    Jan 16 00:09:32 gbpits systemd[1]: Cannot add dependency job for unit wicd.service, ignoring: Unit wicd.service failed to load: No such file or directory. See system logs and 'systemctl status wicd.service' for details.
    Jan 16 00:09:32 gbpits systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 16 00:09:32 gbpits systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 16 00:09:32 gbpits systemd[1]: Starting Remote File Systems.
    Jan 16 00:09:32 gbpits systemd[1]: Reached target Remote File Systems.
    Jan 16 00:09:32 gbpits systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 16 00:09:32 gbpits systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 16 00:09:32 gbpits systemd[1]: Starting Delayed Shutdown Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Starting udev Kernel Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Listening on udev Kernel Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Starting udev Control Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Listening on udev Control Socket.
    Jan 16 00:09:32 gbpits systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 16 00:09:32 gbpits systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Jan 16 00:09:32 gbpits systemd[1]: Starting E

    I thought I would follow up on this, since I finally found a solution (I don't know if it's the correct solution, but it works for me). The cause of the problems was indeed the ambient light sensor (ALS) sending acpi events that were not having any effect (I saw this using acpi_listen from the acpid package).
    So, with acpid installed and started in systemd, I changed the /etc/acpi/handler.sh to add the following cases:
    video/brightnessup)
    echo $(expr $(cat /sys/class/backlight/acpi_video0/brightness) + 1) > /sys/class/backlight/acpi_video0/brightness
    video/brightnessdown)
    echo $(expr $(cat /sys/class/backlight/acpi_video0/brightness) - 1) > /sys/class/backlight/acpi_video0/brightness
    Now the ALS can change the backlight brightness and all is well. Also, since I don't actually like the ALS, I did put some tin foil and tape in front of it so that it will always register a dark room. (So far I have not found any way to disable the ALS programatically outside of Windows)
    Do note that I don't have acpi_osi or acpi_backlight set to anything in the kernel boot parameters, since using acpi_backlight=vendor doesn't work right as I mentioned in my original post.
    Hope this might help someone in the future.
    Last edited by jflanglois (2013-04-01 21:45:10)

  • [SOLVED] Lenovo X201 TrackPoint

    Hi,
    Sometimes when I click the "TrackPoint buttons" on my X201, the cursor suddenly jumps to another location on the screen. It doesn't happen if I use the touchpad buttons and it is not consistently happening. I've tried a live usb with ubuntu and didn't experience any problems.
    Using the trackpoint without clicking doesn't jump around and it happens both during dragging and normal clicking, but again - not consistently.
    It seems to happen most frequently after starting X and the longer I use the computer, the less often it happens.
    The arch install is about a week old and everything is up-to-date.
    This is my /etc/X11/xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "XkbLayout" "dk"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Any ideas to solve this problem?
    Last edited by sebastianskejoe (2011-05-07 11:52:59)

    Moving the InputClass section that has MatchIsPointer "on" to the end of 10-evdev.conf, seems to have fixed this problem.

  • [SOLVED] Lenovo W500 fails to connect wirelessly to home network

    Hi Arch community. I can't get the built in wireless adapter to work but I can't seem to figure this out. I did drop the laptop a few days ago from about 70cm, but it is able to scan for access points, so I am assuming that the built in wireless adapter still works.
    My laptop is a Lenovo W500 and the router is a Netgear Wireless ADSL Firewall Router DG834G.
    On the router I configured it to use this security option:
    WPA-PSK+WPA2-PSK - If selected, wireless clients may use either WPA or WPA2. This option is sometimes called "Mixed Mode".
    $ uname -a
    Linux lumjum 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
    The relevant lines from lspci -v are:
    00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
    Subsystem: Lenovo Device 20ee
    Kernel driver in use: e1000e
    Kernel modules: e1000e
    03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
    Subsystem: Intel Corporation Device 1011
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi
    I followed the guide here https://wiki.archlinux.org/index.php/Be … _wifi-menu
    # ip link set wlp3s0 up
    # ip link show wlp3s0
    3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1492 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:21:6a:51:c0:0e brd ff:ff:ff:ff:ff:ff
    # dmesg | grep firmware
    [ 13.022655] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
    [ 18.315062] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
    # iw dev wlp3s0 scan | grep SSID
    SSID: s54msc35m
    # wpa_supplicant -i wlp3s0 -c <(wpa_passphrase "s54msc35m" "mypsk")
    Successfully initialized wpa_supplicant
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="s54msc35m" auth_failures=1 duration=10 reason=WRONG_KEY
    wlp3s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="s54msc35m"
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="s54msc35m" auth_failures=2 duration=23 reason=CONN_FAILED
    so that didn't work so next I continued to follow the guide and tried:
    # echo 'ctrl_interface=DIR=/run/wpa_supplicant' > /etc/wpa_supplicant.conf
    # wpa_passphrase "s54msc35m" "mypsk" >> /etc/wpa_supplicant.conf
    # ip link set wlp3s0 up
    # wpa_supplicant -D nl80211,wext -c /etc/wpa_supplicant.conf -i wlp3s0
    Successfully initialized wpa_supplicant
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="s54msc35m" auth_failures=1 duration=10 reason=WRONG_KEY
    wlp3s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="s54msc35m"
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="s54msc35m" auth_failures=2 duration=23 reason=WRONG_KEY
    wlp3s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="s54msc35m"
    wlp3s0: SME: Trying to authenticate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Trying to associate with 00:18:4d:5d:ef:0a (SSID='s54msc35m' freq=2447 MHz)
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    wlp3s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="s54msc35m" auth_failures=3 duration=46 reason=WRONG_KEY
    Both times these two lines show up
    wlp3s0: Associated with 00:18:4d:5d:ef:0a
    wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:18:4d:5d:ef:0a reason=3 locally_generated=1
    Does this mean it does connect successfully and then I do not understand why it disconnects afterwards?
    Many thanks in advance!
    Last edited by kso (2015-01-07 09:10:38)

    Hi everyone, I got it finally after some more headbashing! It turns out I can't run networkmanager along with wpa_supplicant at the same time. I don't understand why though.
    Before I happened to install networkmanager along with network-manager-applet via pacman.
    # pacman -S network-manager-applet
    # pacman -S networkmanager
    # systemctl enable NetworkManager
    # systemctl start NetworkManager
    So I just stopped it
    # systemctl disable NetworkManager
    # systemctl stop NetworkManager
    and then uninstalled it
    # pacman -R networkmanager
    # pacman -R network-manager-applet
    Then wpa_supplicant works! Thanks.

  • [SOLVED] Lenovo T530 UEFI Arch/Ubuntu Dual boot - Arch fails to boot.

    Hi All,
    I have installed Arch to my Lenovo T530 to dual boot with Ubuntu using UEFI and Grub.
    After installation, Arch is presented to me as an option when my laptop fires up. However, if I select it, the loader goes to a purple screen and then hangs.
    I have attached here the bootloader scripts for my Arch installation (not working), my Ubuntu installation (working) and the output from sudo lsblk -o name,mountpoint,label,size,uuid.
    Please let me know if there is more useful information I can provide. (I have output from Bootinfoscript available but it is quite extensive).
    I am hoping to find out if there is an easily fixable error in the booting scripts used by Grub. If not, I have seen the section on dual booting with Arch in the wiki. My worry is that if I resort to it, UEFI looks to be temperamental at best and I risk breaking my currently working Ubuntu installation.
    Thanks and regards,
    Simon
    Arch boot script (not working):
    setparams 'Arch (on /dev/sda4)'
    insmod part-gpt
    insmod ext2
    set root= 'hd0,gpt4'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 -\
    -hint-efi=hd0,gpt4 -hint-baremetal=ahci0,gpt4 729b5164-22c4-4c21-8212-\
    66038d60943e
    else
    search --no-floppy --fs-uuid --set=root 729b5164-22c4-4c21-821\
    2-66038d60943e
    fi
    linux /boot/vmlinuz root=UUID=ad4103fa-d940-47ca-8506-301d\
    8071d467 rw quiet
    initrd /boot/initramfs-linux.img
    Ubuntu boot script (working)
    setparams 'Ubuntu, with Linux 3.13.0-24-generic'
    recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part-gpt
    insmod ext2
    set root= 'hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd\
    0,gpt2 --hint-efi=hd0,gpt2 -hint-baremetal=ahci0,gpt2 542bf27c-0fd5-42\
    4a-b4d8-107f7cf97b75
    else
    search --no-floppy --fs-uuid --set=root 542bf27c-0fd5-\
    424a-b4d8-107f7cf97b75
    fi
    echo 'Loading Linux 3.13.0-24-generic ...'
    linux /boot/vmlinuz-3.13.0-24-generic root=UUID=5\
    42bf27c-0fd5-424a-b4d8-107f7cf97b75 ro quiet spash $vt_handoff
    echo 'Loading initial ramdisk ...'
    initrd /boot/initrd.img-3.13.0-24-generic
    Output from sudo lsblk -o name,mountpoint,label,size,uuid
    NAME MOUNTPOINT LABEL SIZE UUID
    sda 119.2G
    ├─sda1 /boot/efi BOOTLOADER 524M 9360-2939
    ├─sda2 / Linux_Ubuntu 34.6G 542bf27c-0fd5-424a-b4d8-107f7cf97b75
    ├─sda3 [SWAP] Swap 9.8G 7768ae01-6e37-450b-bf0c-d873e3fd06a1
    ├─sda4 Linux_Arch 32.7G 729b5164-22c4-4c21-8212-66038d60943e
    ├─sda5 /media/Data Data 33.2G 5a971a77-685b-43d5-a8e6-c7b407a4c2ff
    └─sda6 Misc_Data 8.5G b165990d-bd25-458f-b2d6-63fae28d0870
    sdb 1T
    └─sdb1 1024G a1ee2f60-007a-4292-982b-7d5f8375fc7e
    sr0 1024M
    Last edited by simon_sjw (2015-03-22 10:43:03)

    linux /boot/vmlinuz root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
    Change the UUID here. Where did that come from?
    EDIT: curiously, if you DuckDuckGo search this exact UUID, it comes up a bunch of times and has caused people headaches before. If you fix that you should be okay. If anyone knows why this same exact UUID would incorrectly be created on multiple systems, I'd love to know. Seems like some kind of issue with dual/triple booting and OS-prober.
    2nd EDIT: this UUID is in the default in grub.cfg. For some reason, it sometimes won't be replaced by grub-mkconfig... Maybe the user didn't run grub-mkconfig, but edited the file him or herself? simon_sjw?
    Last edited by nullified (2015-03-22 03:12:36)

  • [SOLVED]lenovo ideapad u350 backlight issue

    Hi, as the thread title says i have an issue with the backlight on my lenovo ideapad u350.
    /sys/class/backlight/  is empty so i cant use xbacklight.....
    I allready added acpi_osi=linux and acpi_backlight=vendor to my menu.lst, but still /sys/class/backlight is empty....
    but I can set the backlight with sudo setpci -s 00:02.0 F4.B=xx , does that mean i just dont have the right module loaded?
    what do I need to do, to get the necesyary stuff in /sys/class/backlight so i can use xbacklight?
    havent found anything with google or in forum/wiki besides people using setpci -s 00:02.0 F4.B=xx , or people having
    backlight dimming working out of the box.
    Last edited by bithoernchen (2011-09-22 20:30:04)

    thank you very much that did the trick.
    kernel.org is down so i had to edit the PKGBUILD, but now everything works.

  • [solved] Lenovo Y510P Sound Issue

    Hello.
    So I recently purchased a Lenovo Y510P which I quite enjoy, running like a champ. But with my current setup, I cannot for whatever reason get sound working. I've enabled and disabled many modules and have tried everything I know of, but I cannot seem to get it to work. Here is a screenshot of what I'm currently working with. Now, I've never really have deal with setting up sound with ALSA or anything before, so excuse me if I'm doing something wrong.
    I appreciate the help, thanks!
    Last edited by Chiggins (2013-10-14 02:07:43)

    Chiggins wrote:Well, if I have two "snd_hda_intel" devices listed under "/proc/asound/modules", how would I specify exactly which should be the default one? I know that you define it default with 0, but how can I tell the difference between the two?
    I think the output of aplay -l is telling you everything you need to know, if you follow the so-called Alternative Method. You know that you have card 0 and card 1, you want card 1 to be default, so make the appropriate subsitution in
    The Wiki wrote:
    To set this card as the default, you can either use the system-wide file /etc/asound.conf or the user-specific file ~/.asoundrc. You may have to create the file if it does not exist. Then insert the following options with the corresponding card.
    pcm.!default {
    type hw
    card 2
    ctl.!default {
    type hw
    card 2

  • [Solved] Lenovo y50 clickpad gestures

    Greetings all,
    I recently bought a lenovo y50 and went through hell trying to get arch to work on this. Well, after I have everything running nicely, I noticed that the touchpad/clickpad will not respond to multitouch (e.g. no two-finger scroll). I have tried all the drivers on the touchpad and synaptics archwiki pages as well as the settings in both cinnamon and gnome. Nothing seems to change the behavior. Does anyone have any ideas? My hardware shows as Elantech hardware.
    SOLUTION:
    Find comment #137 from HERE and follow the instructions
    This fixed worked for me! Everything works perfect!
    Last edited by TheAmazingSarcastic (2014-07-25 00:16:27)

    subraizada3 wrote:
    TheAmazingSarcastic wrote:
    subraizada3 wrote:
    There is a solution for multitouch here, but they used a backported 3.16 kernel (which seems weird because the latest kernel I have is 3.15.5 on Arch)...
    http://forum.notebookreview.com/ideapad … hread.html
    Do any of you have the touchscreen variant? I ordered the touchscreen one and it should arrive in the first week of August.
    I have the touchscreen variant. It works pretty well, but doesn't detect multitouch. When pressing on the screen it registers as a mouse click+mouse movement, which is how windows 8.1 works.
    Well, detecting one touch is better than it not working at all.
    Mine got delayed twice, now it's scheduled to ship on August 15 and arrive on the 22nd (2 days after I start school, which is what I bought it for...) (I ordered on June 29). I'm pretty sure Lenovo will delay it again
    Dang. Well hopefully it doesn't get caught it customs like mine did (assuming you are in USA). Customs held mine for two weeks! it took a month and a half after I placed the order to get it. Good luck! And by the way, I edited the OP with the solution.

  • [SOLVED]Lenovo t400 tp_smapi & hdaps problems

    I noticed there are many people here who run thinkpads.
    I am the proud owner of a thinkpad for 2 months now and i run arch linux on it togeter with kde4.
    But the thing that's bugging me for a 2 days now is that i can't get tp_smapi to work.
    I followed the wiki exacty but i get an error if i try to load it
    FATAL: Error inserting tp_smapi (/lib/modules/2.6.31-ARCH/extra/tp_smapi.ko): No such device or address
    Now i found this solution: Thinkwiki
    But i dont know how to apply this solution on arch linux..
    And i also get this error when i try to load the hadps module for thinkpads:
    FATAL: Error inserting hdaps (/lib/modules/2.6.31-ARCH/kernel/drivers/hwmon/hdaps.ko): No such device
    But i think that the second error is because tp_smapi doesn't work
    Does anyone has any idea how to fix this?
    Last edited by Miitch (2009-10-19 19:21:53)

    I  never have to recompile tp_smapi, however with every new kernel you've got to do the following:
    [kuba@t61p ~]\$ cat linux/bin/fix_hdaps.sh
    #!/bin/sh
    path="/lib/modules/$(uname -r)/"
    rm $path/kernel/drivers/hwmon/hdaps.ko
    cp $path/extra/hdaps.ko $path/kernel/drivers/hwmon/
    /etc/rc.d/hdapsd restart
    hdaps module gets bad path by default.
    Hope that helps.

  • HDMI Port not working on Lenovo G460 Win7-64bit

    I've been trying to solve this for some months now.
    I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
    I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
    In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
    I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
    I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
    I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
    I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
    Is the hdmi port defective?
    I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it?  -->or is it just a hardware problem easily fixed with warranty replacement parts.
    Thank you
    Solved!
    Go to Solution.

    ::Update:: ----------> Partially SOLVED
    Lenovo After Service Center Report:
       1. hdmi connection is fine
    They said that it could be a software problem and that they would try to update the driver.
    Partial Solution:
    Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
    I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
    my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
    Will update solution when i get it to work 100%

  • Black screen while installing driver

    Hi all,
    I am having troubles installing drivers on my lenovo y560 notebook. When I install the driver, once the screen goes black then come back (normal). After that, it goes black again and it stays that way. Sometimes the mouse pointer is visible and I can move it but it's vey laggy. Sometimes it seems like the screen tries to load and I can see a grey part on the right side of the monitor refreshing in rows. I tried with different version of windows, different driver versions but it's the same. I can only use my notebook with default windows driver which is 1024x768. I have this pc about 3-4 years now and this happened just one day. I used it before for playing but one day it would not boot, after the windows logo it goes black screen again. Sometimes I can see that the process led is blinking and sometimes not. Maybe my GPU chip is ruined? Also, I am not connecting any HDMI external monitors to it.
    Solved!
    Go to Solution.

    Hi Kennyhun,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issues with display in your Lenovo Y560 laptop.
    Try to boot the system into BIOS and leave the system for a few minutes and check if there is display flickering or any issues related to display is found, also try to boot the system into safe mode with networking option and check for the issue.
    Try to update the BIOS and check for the issue.
    Click here for the BIOS update for windows 7.
    Hope this helps. Do post back if the issue persists!
    Best regards,                                                          
    Ashwin. S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Flex 3 battery replacement... what should i expect?

    I am considering buying a Flex 3 15 inch. All of these newer, flexible laptops hide their batteries away where they arent as accessible as the ones i am accustomed to. I have had bad experience with Dell batteries dying after a year or 2, but those i can at least buy and replace with ease. The Flex is more like a tablet in that you have to be experienced at taking apart laptops in order to replace anything.
    So if i purchase this laptop, i want to get an idea of what i have to look forward to as far as the battery. How many years can i expect it to last before having to replace it? Lenovo said i would have to send it in to be replaced, but im guessing that assumes that i dont know how to do it (which, honestly, i dont). How expensive can i expect it to be to send in my laptop to have the battery replaced? Im expecting it to be around $200 since the battery is probably $100 already.
    Since the model i am looking at is already $900, i dont want to spend another $200 every few years. Is that about what i can expect? Has anyone had an experience with the Yoga or similar laptop that might shed some light on this?
    Thanks!

    For one, you can take extended warranty for upto 3 years with just $100 (I think), so that should put your mind at ease for that much time.
    I had Lenovo Y560 and the battery was faulty at arrival. Replaced it free of cost and never had any problem since.
    Using Yoga 3 pro for past 4 months and there have been no problems so far. (Battery life 5-6 hours)
    Beyond 3 years, no one can really say, mostly on the forum you will find people who have had issues (coz thats why they come here, right). Hope that you can get responses from more customers.
    A laptop life is about 3-4 years nowadays, so you need to also look for how many years are you planning to use this one. Beyond 5 years, I think that most hardware becomes obsolete (can only use for basic purposes)
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

Maybe you are looking for

  • How do i transfer a movie from my old hp desktop to a macbook pro?

    how do i transfer a movie from my old hp desktop to a macbook pro? On my old computer I had two movies: Fight Club and Garden State and I'd really like to watch them on my new MacBook Pro! But I dont know how to transfer them onto my new laptop help?

  • Unable to import slides and save project

    Hello Captivators, I have a problem. I call it a big problem. I am unable to import any slides from one project to another. I have a project with 15 slides, some with audio. And I have a similar project with the same number of slides. I wanted to imp

  • JNDI lookup problem in WAS 5.1

    Hello all, I have generated an EAR using XDoclet and MyEclipse. When I deploy this EAR on WAS 5.1, I get the following exception: javax.naming.NameNotFoundException: Context: WarHog/nodes/WarHog/servers/server1, name: ejb/TEDIObjectManagerLocal: Firs

  • Release Management and Dsc - How to queue a build when a release is in progress?

    I have VSO and Release Management 2013.4 working and deploying to Azure vm's via DSC The build profile is set to trigger on commit to the Git repo and the release template is set to be triggered on successful build from TFS However if a developer com

  • Error "Update CMS"

    Hi experts, If I do click the "Update CMS" button then come following error message: SLD (URL http://server:port) server exception: IO error: Read timed out Thank you in advance, Stefan