[SOLVED] libdbi-drivers package status?

Since yesterday when running pacman -Syu I am seeing:
:: Starting full system upgrade...
warning: libdbi-drivers: local (0.8.3_1-3) is newer than community (0.8.3_1-2)
Does anyone know if this is just a slow mirror sync issue or something else?
Last edited by mcloaked (2013-03-26 20:30:06)

muon wrote:I have the same issue. I originally got the package from [community] and the problem arose for me after I switched from mysql to mariadb, though I think that was coincidental. I think it may have been an oops on the part of the package maintainer? "grawity" on IRC pointed me to
https://projects.archlinux.org/svntogit … c8a0ed129d
where the pkgrel went from 3 to 2.
I did a "pacman -S libdbi-drivers". It told me I was downgrading, but I think it actually put me to the current release.
Currently on the page at https://www.archlinux.org/packages/comm … i-drivers/ the current version is libdbi-drivers 0.8.3_1-2
However I have installed
pacman -Q libdbi-drivers
libdbi-drivers 0.8.3_1-3
So maybe the version in the [community] repo should be pkgrel 3 and not 2? It would be nice to see a definitive solution.

Similar Messages

SCCM 2012 SP1 CU4 migrated DP shows package status "unknown"

I have a SCCM 2012 SP1 CU4 environment and have shared SCCM 2007 distribution points.
Today I migrated one of the DP's which seems to work well.
However all my packages shows now the status "unknown" for this migrated DP.
This is a problem which should be fixed in CU4 according to the CU4 description. But it is not :-(
Any idea how to solve this ? R2 install ?

Some additional information:
I noticed that the package sources are still available at the "old" ditribution point share abd not on the new sccm 2012 distribution point share. When performing actions described in step 3 below the package becomes available on the distribution point
share......then i guess i can remove the content from the "old" distribution point share ????
I noticed that when a package got the status "unknown" for de migrated DP the following action fix the problem:
--> i remove the DP from the package and immediately add it again, the package status becomes "Successful".....hummm....ok....maybe a script could be created for this
I noticed that when a package got the status "unknown" and the package is also located on the "distribution point share" then following will fix the issue:
--> edit the package and remove the migrated DP and remove the checkbox for string on the distribution point share. Then add the DP again, click Apply and then set the checkbox for storing on the distribution point share and Apply again. Then wait and package
will become available Successful and the package will become available on the distribution point share
But i have 800 packages and 50 to be migrated DP's.....this is not a solution....but what is ????
Any help, ideas, tips, hints, recommendations ?
My overal thoughts are that migrating of a SCCM 2007 DP is not really working at all !!!!!
Or does someone has other experience with e.g. R2 installed ? If so then I will upgrade first...

Data Manager Package status Abort

Hi Expert,
I have an excel DM with three parameter, while running DM it get Abort, there is no Log details, inside the log the package status is success, but the same script i run it through UJKT, its running perfectly and its getting correct values.
Please help me the exact problem is with my template, or BADI,
Regards
Vimal Raj

Hi Bhagyesh Ravange,
I did my scope and its working fine, but i try to run it for a all 30 unit through DM again its getting abort, is there any alternative solution is there, please help me to resolve it.
*XDIM_MEMBERSET TEST_TIME AS %TIM% = %TEST_TIME_SET%
*XDIM_MEMBERSET TEST_CATEGORY AS %CAT% = %TEST_CATEGORY_SET%
*XDIM_MEMBERSET TEST_VERSION AS %VER% = %TEST_VERSION_SET%
*XDIM_MEMBERSET TEST_UNIT AS %UT% = %TEST_UNIT_SET% //New Scope
*START_BADI MAN_CALC01
WRITE = ON
TEST_TIME = %TIM%
TEST_CATEGORY = %CAT%
TEST_VERSION = %VER%
TEST_UNIT = %UT%
*END_BADI

Prestage package status not updating on the server

I have been successful in extracting other prestage packages on DP but for 2 packages, it extract them fine as per the logs and sends the status to the MP as well but the server doesnt reflect the updated status.
prestagecontent.log shows the following
Management Point: 'http://<MP Name>'
Site Code: '<Sitecode>' PrestageContent
DP server: '<DP server name>'
NAL Path: ["Display=\\<DP server name>\"]MSWNET:["SMS_SITE=<sitecode>"]\\<DP server name>\'                PrestageContent
Set authenticator in transport    PrestageContent
Sent <packageID> package state message to site
End ====
What could be the reason, i have tried to recopy the packages from the original source and tried extracting 2-3 times
using the extraction switch "/f" as well but didnt reflect the status.
Prestage option is already checked.

Distmgr.log has the below entries although they were not in red
Will reject STA for DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\ as it does not exist in the PkgServers table       SMS_DISTRIBUTION_MANAGER
7/4/2014 10:07:50 AM    6180 (0x1824)
Will not process this invalid package status file from remote DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\, delete C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA
SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM         6180 (0x1824)
STATMSG: ID=2354 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Primary server name SITE=SITE CODE PID=7420 TID=6180 GMTDATE=Fri Jul 04 04:37:50.055 2014 ISTR0="C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA"
ISTR1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\" ISTR2="SITE CODE001C5" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE CODE001C5" AID1=404 AVAL1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE
CODE"]\\DP server name\" SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM       6180 (0x1824)
Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA        SMS_DISTRIBUTION_MANAGER
7/4/2014 10:07:50 AM         6180 (0x1824)
There are no entries in pkgxfermgr.log

Currency Translation- Package Status error

I am encountering the following error after running the currency translation package.
The following is the error message in the package log
RUN LOGIC : Run program error,Message Number : ''''
Failed
Application:Sales Package Status :ERROR
Can some one please tell me what does this error mean and how it can be resolved

HI,
This error has been discussed in many threads here in this forum.
Refer these and see if u can get a solution:
Re: Currency conversion issue.
Re: Currency Conversion Problem
Regards
Navin

User rights to view package status

A few of our Windows admins have been given the rights to create packages and deployments (mainly for the monthly updates).
However, even though they can create and deploy them, they cannot see the package status. So, if they go to: Software Updates-Deployment Packages then select their package, they can expand their package and see Package status. However, if they
click the Package Status folder, there is nothing underneath it when generally it would show the site, then you can see the dp's and if the package is in Install pending, Installed, etc.
They have the following rights:
Site: Read
Deployment packages class: Administer, Create, Delete, Distribute, Manage folders, Modify, Read
Instance: Delete, Distribute, Modify, Read
What am I missing?

It is virtual impossible to get CM07 security fine tuned enough to allow for this type of thing but it is fairly easy to do in CM12. So upgrade to CM12 or push back on the reporting option.
IMO there is nothing wrong with admin review things view the report, plus viewing the reports will have LESS impact on the server that viewing them via the console so.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SQL table for Package Status history

Anyone know which SQL table stores the history for non-scheduled packages? I know tblScheduleHistory stores scheduled jobs but can't locate the history seen using "Package Status". This is for 5.0 SP2

Please try tblDTSlog table

Package Status

I am getting "ORA-04068 Existing state of Packages has been discarded" when trying to run a package from a form. Is it because of having Schema name and Package name as same?.

Hi Claus,
First of all - it's possible to make DM package status as Failed from inside custom logic badi: Package status for an "IF_UJ_CUSTOM_LOGIC" badi
Analyze the badi code!
The chain is fine, the script is also fine, the only question with badi parameters:
CATEGORY_KD = (%CATEGORY_KD_SET%)
What for you use brackets () ?
Vadim

Prestage Package status not reflecting on the console

Hello,
I have extracted some prestage packages successfully on the new DP but for some reasons, it doesn’t reflect the status on the primary server. After troubleshooting, I found
this article which describes my issue similarly.
http://eskonr.com/tag/sccm-2012/page/2/
Where it says, “Will reject this STA for DP”, that similarly matches with my concern.
I have followed the article regarding the script for compare the version difference but what I am not sure is, I believe it ultimately says to redistribute the content to
the DP once more ?
Let me know if I am wrong or if there is any other way as this is happening for many prestage packages.
Not sure how it started all of a sudden when it working since a day before.

Hello,
I have created a new prestage package and it extracted successfully as per the below message in Distmgr.log but for some reasons the status doesnt reflect on the console.
Please help as this is really urgent
Processing status update for package AAA SMS_DISTRIBUTION_MANAGER
11/12/2014 9:25:21 AM 11344 (0x2C50)
Successfully updated the package server status for ["Display=\\<DP server>\"]MSWNET:["SMS_SITE=SiteID"]\\<DP server>\ for package AAA, Status 3
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=<primaryserver>SITE=<SiteID> PID=19600 TID=11344 GMTDATE=Wed Nov 12 03:55:21.886 2014 ISTR0="AAA" ISTR1="["Display=\\<DP
server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400
AVAL0="AAA" AID1=404 AVAL1="["Display=\\<DP server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\"
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\BKP96Y8Q.STA
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)

[SOLVED] Best drivers for an Nvidia 8600GTS?

Hi all. I installed Arch for the first time over the weekend. Everything went smoothly until it came time to start X - could never get it to work. I tried lots of different remedies (installing nvidia drivers from the repositories, installing the driver supplied by Nvidia themselves, blacklisting Nouveau, etc.). Nothing worked, and I think now the best thing is to start over clean and try to find where I went wrong (as there's a good chance I've done more harm than good in the process).
So as I nuke and reinstall, I'm wondering which driver will be best for my c. 2006 Nvidia 8600GTS card. Should I install the arch nvidia drivers with
pacman -Syu nvidia nvidia-utils nvidia-libgl libvdpau
or should I use the driver supplied by Nvidia? And if I go with the Nvidia-supplied driver, do I leave nvidia-utils, nvidia-libgl and/or libvdpau, or does it replace those, too?
Any thoughts would be appreciated. Thanks!
Last edited by jmatthewturner (2014-06-02 14:48:41)

First of all, please, read through the related Wiki pages.
The arch nvidia drivers (packages: nvidia, nvidia-utils, etc) are the ones supplied by nvidia, maintained and packaged by the arch maintainers and packagers.
https://wiki.archlinux.org/index.php/NVIDIA
The open source driver is called nouveau.
https://wiki.archlinux.org/index.php/Nouveau

False/misleading package status

Situation
Our package status often gives us misleading information. I am wondering whether other people experience the same and/or have found solutions (see Data for more details)
Data
- On BPC 5.1 SP5
- Erroneous Status
1) When Progress shows "Completed", it actually fails at "Convert data" step - "Failed in 1 sec"
2) Our data package downloads flat file from BW's FTP server and import to BPC. Sometimes we have new members and the log will show those "rejects". What's weird is that such rejects log don't show consistently. For example, the log file would show "rejects" today, but even if I don't do anything (i.e. adding those rejects as new members to my dimension), the next day the log would "The values in the source data are same as the database". The same flat file is being fed to BPC, and what was rejected still are included in the flat files because we are running on total snapshot rather than "delta".
Question
Has anyone experienced these issues?
Thank you!
Brian

Brian,
Here is my answer.
1. When convert fails in a second, it means data file doesn't exist or something wrong.
2. The values in the source data are same as the database.
    when you import with clear option, data manager compare it with current data in the fact tables before import,
    If it is exactly same, it shows that error message and will not import.
    Why does we need to import exact same data? That's why DM shows that message.
I hope it will help you.
James Lim

Package status not appended in the Add Remove Programs in control panel after the installation.

Hi,
I have a strange problem with "Package status not appended in the Add Remove Programs after the installation.".
Like, onec the package is installed via SCCM, it should be listed in the Add Remove programs with the package name, version and the install date.
At times on random machine these details are not appended. Although the application works fine on the machine, but the correct details are not populated in Add/ Remove programs.
There is no issue with the package as it shows correct details on few other machine where it is installed.
This behaviour is random on random machines. Hence, very difficult to track the reason.
System Security analyst at CapG

Hi Jason,
Yes, i have tried Jorgen's suggestion, ans as said earlier. It install the application smoothly on any other machine (any random machine) perfectly with correct details in Add Remove Programs.
As mentioned earlier, the same package, same environment, same set of machines with same OS, it installs correctly on few machines.. and on few its just misses to add correct details in Add Remove progs.
If it was related to package, how does it install corretly on other machines?? How does the same package installs correctly when done manually or by that means by PSEXEC.
To a matter of fact, we are checking our package for the multiple times now, just to make sure it is buldled correctly with correct install scripts. We are trying to search different multiple ways to see what makes the package to skip the
correct entry in the Add Remove.
To add, this is not with one package, it happens with random package with random machine. There is not typical behaviour that could be tracked.
All the installations done via SCCM 07, with admin account.
This looks more tricky and complex then as simple as saying, its the fault of packaging.
I hate to say this but this is NOT a CM07 problem, You will need to work with your packaging team, and use tools like process monitor,psexec and the msi log to determine why it is failing.
Your first step is to find a pc where you can consistent get the setup to fails. once you get that you can use process monitor and the msi log files to determine what is going on.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

[SOLVED] cannot install package query

I want to install yaourt, but I can't seem to install package query. I acquired the tarball from here and followed all the steps here
[maarten@maarten ~]$ cd ~/src
[maarten@maarten src]$ tar -zxvf package-query.tar.gz
package-query/
package-query/PKGBUILD
[maarten@maarten src]$ cd ~/src/package-query
[maarten@maarten package-query]$ makepkg -s
==> Making package: package-query 1.0.1-1 (Sun Jul 8 11:09:03 CEST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading package-query-1.0.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 361k 100 361k 0 0 205k 0 0:00:01 0:00:01 --:--:-- 226k
==> Validating source files with md5sums...
package-query-1.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting package-query-1.0.1.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for yajl_free in -lyajl... yes
checking for gawk... (cached) gawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.26.0
checking for libcurl >= version 7.19.4... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for git... git
checking for .git/... no
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
package-query:
Build information:
source code location : .
prefix : /usr
sysconfdir : /etc
conf file : /etc/pacman.conf
localstatedir : /var
database dir : /var/lib/pacman/
compiler : gcc
compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
package-query version : 1.0.1
using git version : no
git ver :
Variable information:
root working directory : /
aur base url : [url]http://aur.archlinux.org[/url]
make all-recursive
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
Making all in src
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
mv -f .deps/aur.Tpo .deps/aur.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
alpm-query.c: In function 'alpm_pkg_get_realsize':
alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
util.c: In function 'ltostr':
util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'itostr':
util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'concat_backup_list':
util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'string_fcat':
util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/util.Tpo .deps/util.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
mv -f .deps/color.Tpo .deps/color.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
mv -f .deps/package-query.Tpo .deps/package-query.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making all in doc
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/maarten/src/package-query/pkg/usr/bin'
libtool: install: /usr/bin/install -c package-query /home/maarten/src/package-query/pkg/usr/bin/package-query
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making install in doc
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/share/man/man8"
/usr/bin/install -c -m 644 package-query.8 '/home/maarten/src/package-query/pkg/usr/share/man/man8'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: package-query 1.0.1-1 (Sun Jul 8 11:09:18 CEST 2012)
[maarten@maarten package-query]$ dir
PKGBUILD package-query-1.0.1.tar.gz src
package-query-1.0.1-1-i686.pkg.tar.xz pkg
[maarten@maarten package-query]$ sudo pacman -U package-query-1.0.1-1-i686.pkg.tar.xz
Password:
loading packages...
error: 'package-query-1.0.1-1-i686.pkg.tar.xz': invalid or corrupted package (PGP signature)
I already reran pacman-key --init and pacman-key --populate archlinux after removing the allready acquired signatures (/etc/pacman.d/gnupg). But it keeps returning the same error.
Do I need to add another key manually to install packages manually from the AUR?
Last edited by maartennnnnnn (2012-07-08 09:44:01)

I edited your post to change the \[quote\] tags to \[code\] tags - it makes for a much easier to read post
https://wiki.archlinux.org/index.php/Fo … s_and_Code
Two options are to change your SigLevel or sign your own key...

[SOLVED] Splitting grub2 package as grub2-bios and grub2-efi

Hi all,
I currently maintain the grub2-efi-bzr http://aur.archlinux.org/packages.php?ID=40290 and grub2-bios-bzr http://aur.archlinux.org/packages.php?ID=41055 AUR packages. I proposed a split PKGBUILD to tpowa and pressh for grub2 package based on requests at https://bugs.archlinux.org/task/19838 and https://bugs.archlinux.org/task/20419 . The PKGBUILD creates 4 packages grub2-common, grub2-bios, grub2-efi-x86_64, grub2-efi-i386.
I need your impressions and suggestions on improving the PKGBUILD, especially in avoiding the use of multilib toolchain. Thanks in advance.
grub2-bios for Archlinux i686 and x86_64 (multilib needed in x86_64) - compiled as any in Arch64
grub2-bios for Archlinux i686 and x86_64 (multilib needed in x86_64) - compiled as any in Arch64
grub2-efi-x86_64 for Archlinux i686 and x86_64 (no need for multilib in x86_64, not possible to compile in i686) - compiled as any in Arch64
I currently use x86_64 Archlinux with gcc-multilib from the official repo. I do not have i686 linux (either Arch or any other distro) installed. My system compiles both grub2-efi-x86_64 and grub2-efi-i386 using the below PKGBUILD. I use only grub2-efi-x86_64 (or x86_64-EFI) in my system.
_grub2_rev=3040
_grub2_lua_ver=19
_grub2_gpxe_ver=12
_grub2_ntldr_ver=13
_grub2_915_ver=6
_USE_MULTILIB=1
pkgname=('grub2-common' 'grub2-bios' 'grub2-efi-i386')
pkgbase="grub2"
pkgver="1.99beta0_r${_grub2_rev}"
pkgrel=1
url="http://www.gnu.org/software/grub/"
arch=('i686' 'x86_64')
license=('GPL3')
optdepends=()
makedepends=('bdf-unifont' 'python2' 'xz' 'autogen' 'texinfo' 'help2man' 'gettext')
options=(strip docs zipman !emptydirs)
groups=('grub2')
conflicts=()
provides=()
# source=("ftp://alpha.gnu.org/gnu/grub/grub-${pkgver}.tar.gz"
source=("http://dl.dropbox.com/u/9710721/grub2_sources/grub2_r${_grub2_rev}.tar.xz"
"http://dl.dropbox.com/u/9710721/grub2_sources/grub2_extras_lua_r${_grub2_lua_ver}.tar.xz"
"http://dl.dropbox.com/u/9710721/grub2_sources/grub2_extras_gpxe_r${_grub2_gpxe_ver}.tar.xz"
"http://dl.dropbox.com/u/9710721/grub2_sources/grub2_extras_ntldr-img_r${_grub2_ntldr_ver}.tar.xz"
"http://dl.dropbox.com/u/9710721/grub2_sources/grub2_extras_915resolution_r${_grub2_915_ver}.tar.xz"
'grub2.default'
'grub.cfg.example'
'20_memtest86+'
'05_archtheme')
noextract=("grub2_extras_lua_r${_grub2_lua_ver}.tar.xz"
"grub2_extras_gpxe_r${_grub2_gpxe_ver}.tar.xz"
"grub2_extras_ntldr-img_r${_grub2_ntldr_ver}.tar.xz"
"grub2_extras_915resolution_r${_grub2_915_ver}.tar.xz")
sha256sums=('50e17683b972c0f5aab9b252af6c800bdc6068aab3654059046a435a3c5eccb6'
'4d092a8780342a0f7fb5f5f92dc3b123fb5dd583ba137357630c56d416ed3114'
'8ce1b6b89ef0e3545736477d4c4418524e32c7fb9ba40c67dcebfb84b98cde66'
'554e9d65805ac61ca9a8c7cecdf6e7d28375dc28b3984140faef0e929e1ebd5b'
'f0bd90bbbad4b07ec2053d4056f7c5252e95e97477af4206df59ec2d72d88ce0'
'9dc7834514deabba3eb3ed19d0c7d73e3ab0114b7cd8a2eb6b17e8b7a6328143'
'8128da77d8e8c86077fde561ba107756ece744ad54a16161c637ce73f836a84a'
'ba0f871ee93760d14d7f19709bb875af4a863a758776a23519ca7100a63da295'
'6628b70b857c024297af38cf519bfe7d518a122030ab5d0958677a60ddff6cdd')
# DESTARCH="i686"
DESTARCH="x86_64"
if [ "${CARCH}" = 'x86_64' ] && [ "${_USE_MULTILIB}" = '1' ]
then
makedepends=(${makedepends[@]} 'gcc-multilib' 'gcc-libs-multilib' 'lib32-glibc' 'binutils-multilib' 'libtool-multilib')
_EFIEMU="--enable-efiemu"
_CFLAGS=""
_HOST="x86_64"
if [ "${DESTARCH}" = 'i686' ]
then
_CFLAGS="-m32"
_HOST="i686"
fi
elif [ "${CARCH}" = 'x86_64' ] && [ "${_USE_MULTILIB}" = '0' ]
then
echo "This package can be built only in a i686 system or in a x86_64 system using gcc-multilib. Exiting."
exit 1
fi
if [ "${CARCH}" = 'i686' ]
then
_EFIEMU="--disable-efiemu"
if [ "${DESTARCH}" = 'x86_64' ]
then
_CFLAGS="-m32 -static"
_HOST="i686"
fi
fi
build_grub2-common_and_bios() {
rm -rf ${srcdir}/grub2_bios_${DESTARCH} || true
cp -r ${srcdir}/grub2 ${srcdir}/grub2_bios_${DESTARCH}
cd ${srcdir}/grub2_bios_${DESTARCH}
mkdir ${srcdir}/grub2_bios_${DESTARCH}/grub2-extras/
cd ${srcdir}/grub2_bios_${DESTARCH}/grub2-extras/
bsdtar xf ${srcdir}/grub2_extras_lua_r${_grub2_lua_ver}.tar.xz
bsdtar xf ${srcdir}/grub2_extras_gpxe_r${_grub2_gpxe_ver}.tar.xz
bsdtar xf ${srcdir}/grub2_extras_ntldr-img_r${_grub2_ntldr_ver}.tar.xz
bsdtar xf ${srcdir}/grub2_extras_915resolution_r${_grub2_915_ver}.tar.xz
cd ${srcdir}/grub2_bios_${DESTARCH}
export GRUB_CONTRIB=${srcdir}/grub2_bios_${DESTARCH}/grub2-extras/
## Archlinux changed default /usr/bin/python3, need to use /usr/bin/python2 instead
cp ${srcdir}/grub2_bios_${DESTARCH}/autogen.sh ${srcdir}/grub2_bios_${DESTARCH}/autogen_unmodified.sh
sed -i 's|python|python2|' ${srcdir}/grub2_bios_${DESTARCH}/autogen.sh
${srcdir}/grub2_bios_${DESTARCH}/autogen.sh
echo
mkdir ${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS
cd ${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS
CFLAGS="${_CFLAGS}" ${srcdir}/grub2_bios_${DESTARCH}/configure --with-platform=pc \
--host=${_HOST} \
--program-transform-name=s,grub,grub2, \
--enable-mm-debug \
${_EFIEMU} \
--enable-grub-mkfont \
--prefix=/usr \
--bindir=/bin \
--sbindir=/sbin \
--mandir=/usr/share/man \
--infodir=/usr/share/info \
--sysconfdir=/etc
echo
CFLAGS="${_CFLAGS}" make
echo
${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS/grub-mkfont --output=${srcdir}/unifont.pf2 /usr/share/fonts/misc/unifont.bdf || true
${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS/grub-mkfont --ascii-bitmaps --output=${srcdir}/ascii.pf2 /usr/share/fonts/misc/unifont.bdf || true
build_grub2-efi-i386() {
mkdir ${srcdir}/grub2_efi/BUILD_EFI_i386
cd ${srcdir}/grub2_efi/BUILD_EFI_i386
CFLAGS="${_CFLAGS}" ${srcdir}/grub2_efi/configure --with-platform=efi \
--target=i386 \
--host=${_HOST} \
--program-transform-name=s,grub,grub2, \
--enable-mm-debug \
--disable-efiemu \
--prefix=/usr \
--bindir=/bin \
--sbindir=/sbin \
--mandir=/usr/share/man \
--infodir=/usr/share/info \
--sysconfdir=/etc
echo
CFLAGS="${_CFLAGS}" make
echo
build_grub2-efi() {
rm -rf ${srcdir}/grub2_efi || true
cp -r ${srcdir}/grub2 ${srcdir}/grub2_efi
rm -rf ${srcdir}/grub2
cd ${srcdir}/grub2_efi
mkdir ${srcdir}/grub2_efi/grub2-extras/
cd ${srcdir}/grub2_efi/grub2-extras/
bsdtar xf ${srcdir}/grub2_extras_lua_r${_grub2_lua_ver}.tar.xz
bsdtar xf ${srcdir}/grub2_extras_gpxe_r${_grub2_gpxe_ver}.tar.xz
cd ${srcdir}/grub2_efi
export GRUB_CONTRIB=${srcdir}/grub2_efi/grub2-extras/
## Archlinux changed default /usr/bin/python3, need to use /usr/bin/python2 instead
cp ${srcdir}/grub2_efi/autogen.sh ${srcdir}/grub2_efi/autogen_unmodified.sh
sed -i 's|python|python2|' ${srcdir}/grub2_efi/autogen.sh
${srcdir}/grub2_efi/autogen.sh
echo
build_grub2-efi-i386
echo
build() {
echo
build_grub2-common_and_bios #
echo
build_grub2-efi #
echo
package_grub2-common() {
pkgdesc="The GNU GRand Unified Bootloader version 2 - Files common for all platforms"
install="grub2-common.install"
depends=('sh' 'xz' 'freetype2' 'mtools' 'dosfstools')
conflicts=('grub2')
backup=('etc/default/grub' 'etc/grub.d/40_custom')
cd ${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS
make DESTDIR=${pkgdir} install
## install grub2-extras ntldr-img's grubinst as grub2-grubinst
install ${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS/grub-core/grubinst ${pkgdir}/sbin/grub2-grubinst || true
## remove platform specific files
rm -rf ${pkgdir}/usr/lib/grub2/
rm -rf ${pkgdir}/usr/share/grub2/
## remove some problamatic files - may work properly in future
rm -rf ${pkgdir}/etc/bash_completion.d/
cp ${pkgdir}/sbin/grub2-install ${pkgdir}/sbin/grub2_bios-install
cp ${pkgdir}/sbin/grub2-install ${pkgdir}/sbin/grub2_efi_x86_64-install
cp ${pkgdir}/sbin/grub2-install ${pkgdir}/sbin/grub2_efi_i386-install
sed -i "s|^$target_cpu$=.*|\1=i386|; \
s|^$platform$=.*|\1=pc|" \
${pkgdir}/sbin/grub2_bios-install
sed -i "s|^$target_cpu$=.*|\1=x86_64|; \
s|^$platform$=.*|\1=efi|" \
${pkgdir}/sbin/grub2_efi_x86_64-install
sed -i "s|^$target_cpu$=.*|\1=i386|; \
s|^$platform$=.*|\1=efi|" \
${pkgdir}/sbin/grub2_efi_i386-install
## install the /etc/grub.d/ files
install ${startdir}/05_archtheme ${pkgdir}/etc/grub.d/05_archtheme
install ${startdir}/20_memtest86+ ${pkgdir}/etc/grub.d/20_memtest86+
## install the unifont files
install ${srcdir}/unifont.pf2 ${pkgdir}/etc/grub.d/unifont.pf2 || true
install ${srcdir}/ascii.pf2 ${pkgdir}/etc/grub.d/ascii.pf2 || true
## install /etc/default/grub
install -Dm644 ${srcdir}/grub2.default ${pkgdir}/etc/default/grub
## install example grub2 config file
install -Dm755 ${srcdir}/grub.cfg.example ${pkgdir}/etc/grub.d/grub.cfg.example
## rename grub.info to grub2.info
mv ${pkgdir}/usr/share/info/grub.info ${pkgdir}/usr/share/info/grub2.info || true
export CARCH="${DESTARCH}"
package_grub2-bios() {
pkgdesc="The GNU GRand Unified Bootloader version 2 - Built for PC BIOS"
arch=('any')
depends=(grub2-common=${pkgver})
replaces=('grub2')
install="grub2-bios.install"
cd ${srcdir}/grub2_bios_${DESTARCH}/BUILD_BIOS
make DESTDIR=${pkgdir} install
## remove non platform-specific files
rm -rf ${pkgdir}/bin/
rm -rf ${pkgdir}/sbin/
rm -rf ${pkgdir}/etc/
rm -rf ${pkgdir}/usr/share/info/
rm -rf ${pkgdir}/usr/share/man/
rm -rf ${pkgdir}/usr/lib/grub/
package_grub2-efi-i386() {
pkgdesc="The GNU GRand Unified Bootloader version 2 - i386 UEFI version"
arch=('any')
depends=("grub2-common=${pkgver}" 'efibootmgr-git')
replaces=('grub2-efi-x86')
install="grub2-efi.install"
cd ${srcdir}/grub2_efi/BUILD_EFI_i386
make DESTDIR=${pkgdir} install
## remove non platform-specific files
rm -rf ${pkgdir}/bin/
rm -rf ${pkgdir}/sbin/
rm -rf ${pkgdir}/etc/
rm -rf ${pkgdir}/usr/share/info/
rm -rf ${pkgdir}/usr/share/man/
rm -rf ${pkgdir}/usr/lib/grub/
sed -i "s|^$_EFI_ARCH$=.*|\1=i386|" ${startdir}/grub2-efi.install
Last edited by skodabenz (2011-01-30 19:36:25)

The package is now in testing repo and will soon be moved to extra repo. Solved by splitting the PKGBUILDs and through direct interaction with grub2 maintainer using irc.

Import package status with successful when all the data have been rejected

Dear all,
We use the import package to import some data files. We check that the status is successful , but all the data are rejected. Is it possible to set the status to error when there are reject records in the data file?
Best Regards,
Jeff

Try to set the MAXREJECTCOUNT parameter in the transformation file to -1. This will create an error or warning if you have rejected records.
Hope this helps.
-Joost

[SOLVED] libdbi-drivers package status?

Similar Messages

Maybe you are looking for